LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Malaterre <malat@debian.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: aaro.koskinen@iki.fi, LKML <linux-kernel@vger.kernel.org>,
	Paul Mackerras <paulus@samba.org>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	Christoph Hellwig <hch@lst.de>,
	Larry Finger <Larry.Finger@lwfinger.net>
Subject: Re: [PATCH] powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
Date: Wed, 19 Jun 2019 16:28:47 +0200
Message-ID: <CA+7wUsy78oRKsNBJqM494MZynC+aZd27D1ZcvMCCQmF2wu5-gw@mail.gmail.com> (raw)
In-Reply-To: <a5fc355e44fb5edea41274329f7c5d04a8dff6fc.camel@kernel.crashing.org>

On Wed, Jun 19, 2019 at 4:18 PM Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
>
> On Wed, 2019-06-19 at 22:32 +1000, Michael Ellerman wrote:
> > Christoph Hellwig <hch@lst.de> writes:
> > > Any chance this could get picked up to fix the regression?
> >
> > Was hoping Ben would Ack it. He's still powermac maintainer :)
> >
> > I guess he OK'ed it in the other thread, will add it to my queue.
>
> Yeah ack. If I had written it myself, I would have made the DMA bits a
> variable and only set it down to 30 if I see that device in the DT
> early on, but I can't be bothered now, if it works, ship it :-)
>
> Note: The patch affects all ppc32, though I don't think it will cause
> any significant issue on those who don't need it.

Thanks, that answer my earlier question.

> Cheers,
> Ben.
>
> > cheers
> >
> > > On Thu, Jun 13, 2019 at 10:24:46AM +0200, Christoph Hellwig wrote:
> > > > With the strict dma mask checking introduced with the switch to
> > > > the generic DMA direct code common wifi chips on 32-bit
> > > > powerbooks
> > > > stopped working.  Add a 30-bit ZONE_DMA to the 32-bit pmac builds
> > > > to allow them to reliably allocate dma coherent memory.
> > > >
> > > > Fixes: 65a21b71f948 ("powerpc/dma: remove
> > > > dma_nommu_dma_supported")
> > > > Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> > > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > > > ---
> > > >  arch/powerpc/include/asm/page.h         | 7 +++++++
> > > >  arch/powerpc/mm/mem.c                   | 3 ++-
> > > >  arch/powerpc/platforms/powermac/Kconfig | 1 +
> > > >  3 files changed, 10 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/powerpc/include/asm/page.h
> > > > b/arch/powerpc/include/asm/page.h
> > > > index b8286a2013b4..0d52f57fca04 100644
> > > > --- a/arch/powerpc/include/asm/page.h
> > > > +++ b/arch/powerpc/include/asm/page.h
> > > > @@ -319,6 +319,13 @@ struct vm_area_struct;
> > > >  #endif /* __ASSEMBLY__ */
> > > >  #include <asm/slice.h>
> > > >
> > > > +/*
> > > > + * Allow 30-bit DMA for very limited Broadcom wifi chips on many
> > > > powerbooks.
> > > > + */
> > > > +#ifdef CONFIG_PPC32
> > > > +#define ARCH_ZONE_DMA_BITS 30
> > > > +#else
> > > >  #define ARCH_ZONE_DMA_BITS 31
> > > > +#endif
> > > >
> > > >  #endif /* _ASM_POWERPC_PAGE_H */
> > > > diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
> > > > index cba29131bccc..2540d3b2588c 100644
> > > > --- a/arch/powerpc/mm/mem.c
> > > > +++ b/arch/powerpc/mm/mem.c
> > > > @@ -248,7 +248,8 @@ void __init paging_init(void)
> > > >          (long int)((top_of_ram - total_ram) >> 20));
> > > >
> > > >  #ifdef CONFIG_ZONE_DMA
> > > > - max_zone_pfns[ZONE_DMA] = min(max_low_pfn, 0x7fffffffUL
> > > > >> PAGE_SHIFT);
> > > > + max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
> > > > +                 ((1UL << ARCH_ZONE_DMA_BITS) - 1) >>
> > > > PAGE_SHIFT);
> > > >  #endif
> > > >   max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
> > > >  #ifdef CONFIG_HIGHMEM
> > > > diff --git a/arch/powerpc/platforms/powermac/Kconfig
> > > > b/arch/powerpc/platforms/powermac/Kconfig
> > > > index f834a19ed772..c02d8c503b29 100644
> > > > --- a/arch/powerpc/platforms/powermac/Kconfig
> > > > +++ b/arch/powerpc/platforms/powermac/Kconfig
> > > > @@ -7,6 +7,7 @@ config PPC_PMAC
> > > >   select PPC_INDIRECT_PCI if PPC32
> > > >   select PPC_MPC106 if PPC32
> > > >   select PPC_NATIVE
> > > > + select ZONE_DMA if PPC32
> > > >   default y
> > > >
> > > >  config PPC_PMAC64
> > > > --
> > > > 2.20.1
> > >
> > > ---end quoted text---
>

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-13  8:24 Christoph Hellwig
2019-06-13 18:51 ` Larry Finger
2019-06-14  7:24 ` Mathieu Malaterre
2019-06-14 19:15   ` Aaro Koskinen
2019-06-14 20:26     ` Larry Finger
2019-06-14 19:02 ` Aaro Koskinen
2019-06-19 10:50 ` Christoph Hellwig
2019-06-19 12:32   ` Michael Ellerman
2019-06-19 13:31     ` Benjamin Herrenschmidt
2019-06-19 14:28       ` Mathieu Malaterre [this message]
2019-06-20 13:49       ` Michael Ellerman
2019-06-23 10:34 ` Michael Ellerman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+7wUsy78oRKsNBJqM494MZynC+aZd27D1ZcvMCCQmF2wu5-gw@mail.gmail.com \
    --to=malat@debian.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=aaro.koskinen@iki.fi \
    --cc=benh@kernel.crashing.org \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org linuxppc-dev@archiver.kernel.org
	public-inbox-index linuxppc-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox