* [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object.
@ 2019-10-24 9:26 Ran Wang
2019-10-24 9:26 ` [PATCH v10 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Ran Wang @ 2019-10-24 9:26 UTC (permalink / raw)
To: Rafael J . Wysocki, Rob Herring, Li Yang, Mark Rutland,
Pavel Machek, Huang Anson
Cc: Li Biwen, Len Brown, devicetree, Greg Kroah-Hartman, linux-pm,
linux-kernel, Ran Wang, linuxppc-dev, linux-arm-kernel
Some user might want to go through all registered wakeup sources
and doing things accordingly. For example, SoC PM driver might need to
do HW programming to prevent powering down specific IP which wakeup
source depending on. So add this API to help walk through all registered
wakeup source objects on that list and return them one by one.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Change in v10:
- Add 'Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>'
to commit message.
Change in v9:
- Supplement comments for wakeup_sources_read_lock(),
wakeup_sources_read_unlock, wakeup_sources_walk_start and
wakeup_sources_walk_next().
Change in v8:
- Rename wakeup_source_get_next() to wakeup_sources_walk_next().
- Add wakeup_sources_read_lock() to take over locking job of
wakeup_source_get_star().
- Rename wakeup_source_get_start() to wakeup_sources_walk_start().
- Replace wakeup_source_get_stop() with wakeup_sources_read_unlock().
- Define macro for_each_wakeup_source(ws).
Change in v7:
- Remove define of member *dev in wake_irq to fix conflict with commit
c8377adfa781 ("PM / wakeup: Show wakeup sources stats in sysfs"), user
will use ws->dev->parent instead.
- Remove '#include <linux/of_device.h>' because it is not used.
Change in v6:
- Add wakeup_source_get_star() and wakeup_source_get_stop() to aligned
with wakeup_sources_stats_seq_start/nex/stop.
Change in v5:
- Update commit message, add decription of walk through all wakeup
source objects.
- Add SCU protection in function wakeup_source_get_next().
- Rename wakeup_source member 'attached_dev' to 'dev' and move it up
(before wakeirq).
Change in v4:
- None.
Change in v3:
- Adjust indentation of *attached_dev;.
Change in v2:
- None.
drivers/base/power/wakeup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/pm_wakeup.h | 9 ++++++++
2 files changed, 63 insertions(+)
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 5817b51..70a9edb 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -248,6 +248,60 @@ void wakeup_source_unregister(struct wakeup_source *ws)
EXPORT_SYMBOL_GPL(wakeup_source_unregister);
/**
+ * wakeup_sources_read_lock - Lock wakeup source list for read.
+ *
+ * Returns an index of srcu lock for struct wakeup_srcu.
+ * This index must be passed to the matching wakeup_sources_read_unlock().
+ */
+int wakeup_sources_read_lock(void)
+{
+ return srcu_read_lock(&wakeup_srcu);
+}
+EXPORT_SYMBOL_GPL(wakeup_sources_read_lock);
+
+/**
+ * wakeup_sources_read_unlock - Unlock wakeup source list.
+ * @idx: return value from corresponding wakeup_sources_read_lock()
+ */
+void wakeup_sources_read_unlock(int idx)
+{
+ srcu_read_unlock(&wakeup_srcu, idx);
+}
+EXPORT_SYMBOL_GPL(wakeup_sources_read_unlock);
+
+/**
+ * wakeup_sources_walk_start - Begin a walk on wakeup source list
+ *
+ * Returns first object of the list of wakeup sources.
+ *
+ * Note that to be safe, wakeup sources list needs to be locked by calling
+ * wakeup_source_read_lock() for this.
+ */
+struct wakeup_source *wakeup_sources_walk_start(void)
+{
+ struct list_head *ws_head = &wakeup_sources;
+
+ return list_entry_rcu(ws_head->next, struct wakeup_source, entry);
+}
+EXPORT_SYMBOL_GPL(wakeup_sources_walk_start);
+
+/**
+ * wakeup_sources_walk_next - Get next wakeup source from the list
+ * @ws: Previous wakeup source object
+ *
+ * Note that to be safe, wakeup sources list needs to be locked by calling
+ * wakeup_source_read_lock() for this.
+ */
+struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws)
+{
+ struct list_head *ws_head = &wakeup_sources;
+
+ return list_next_or_null_rcu(ws_head, &ws->entry,
+ struct wakeup_source, entry);
+}
+EXPORT_SYMBOL_GPL(wakeup_sources_walk_next);
+
+/**
* device_wakeup_attach - Attach a wakeup source object to a device object.
* @dev: Device to handle.
* @ws: Wakeup source object to attach to @dev.
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index 661efa0..aa3da66 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -63,6 +63,11 @@ struct wakeup_source {
bool autosleep_enabled:1;
};
+#define for_each_wakeup_source(ws) \
+ for ((ws) = wakeup_sources_walk_start(); \
+ (ws); \
+ (ws) = wakeup_sources_walk_next((ws)))
+
#ifdef CONFIG_PM_SLEEP
/*
@@ -92,6 +97,10 @@ extern void wakeup_source_remove(struct wakeup_source *ws);
extern struct wakeup_source *wakeup_source_register(struct device *dev,
const char *name);
extern void wakeup_source_unregister(struct wakeup_source *ws);
+extern int wakeup_sources_read_lock(void);
+extern void wakeup_sources_read_unlock(int idx);
+extern struct wakeup_source *wakeup_sources_walk_start(void);
+extern struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws);
extern int device_wakeup_enable(struct device *dev);
extern int device_wakeup_disable(struct device *dev);
extern void device_set_wakeup_capable(struct device *dev, bool capable);
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v10 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define
2019-10-24 9:26 [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
@ 2019-10-24 9:26 ` Ran Wang
2019-10-24 9:26 ` [PATCH v10 3/3] soc: fsl: add RCPM driver Ran Wang
2019-10-29 21:19 ` [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Li Yang
2 siblings, 0 replies; 4+ messages in thread
From: Ran Wang @ 2019-10-24 9:26 UTC (permalink / raw)
To: Rafael J . Wysocki, Rob Herring, Li Yang, Mark Rutland,
Pavel Machek, Huang Anson
Cc: Li Biwen, Len Brown, devicetree, Greg Kroah-Hartman, linux-pm,
linux-kernel, Ran Wang, linuxppc-dev, linux-arm-kernel
By default, QorIQ SoC's RCPM register block is Big Endian. But
there are some exceptions, such as LS1088A and LS2088A, are
Little Endian. So add this optional property to help identify
them.
Actually LS2021A and other Layerscapes won't totally follow Chassis
2.1, so separate them from powerpc SoC.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Change in v10:
- None
Change in v9:
- None
Change in v8:
- None.
Change in v7:
- None.
Change in v6:
- None.
Change in v5:
- Add 'Reviewed-by: Rob Herring <robh@kernel.org>' to commit message.
- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
please see https://lore.kernel.org/patchwork/patch/1101022/
Change in v4:
- Adjust indectation of 'ls1021a, ls1012a, ls1043a, ls1046a'.
Change in v3:
- None.
Change in v2:
- None.
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..5a33619 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -5,7 +5,7 @@ and power management.
Required properites:
- reg : Offset and length of the register set of the RCPM block.
- - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+ - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
fsl,rcpm-wakeup property.
- compatible : Must contain a chip-specific RCPM block compatible string
and (if applicable) may contain a chassis-version RCPM compatible
@@ -20,6 +20,7 @@ Required properites:
* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+ * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
which the chip complies.
@@ -27,14 +28,19 @@ Chassis Version Example Chips
--------------- -------------------------------
1.0 p4080, p5020, p5040, p2041, p3041
2.0 t4240, b4860, b4420
-2.1 t1040, ls1021
+2.1 t1040,
+2.1+ ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+ will be Big Endian (default case).
Example:
The RCPM node for T4240:
rcpm: global-utilities@e2000 {
compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
reg = <0xe2000 0x1000>;
- fsl,#rcpm-wakeup-cells = <2>;
+ #fsl,rcpm-wakeup-cells = <2>;
};
* Freescale RCPM Wakeup Source Device Tree Bindings
@@ -44,7 +50,7 @@ can be used as a wakeup source.
- fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
register cells. The number of IPPDEXPCR register cells is defined in
- "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is
+ "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
the bit mask that should be set in IPPDEXPCR0, and the second register
cell is for IPPDEXPCR1, and so on.
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v10 3/3] soc: fsl: add RCPM driver
2019-10-24 9:26 [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-10-24 9:26 ` [PATCH v10 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
@ 2019-10-24 9:26 ` Ran Wang
2019-10-29 21:19 ` [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Li Yang
2 siblings, 0 replies; 4+ messages in thread
From: Ran Wang @ 2019-10-24 9:26 UTC (permalink / raw)
To: Rafael J . Wysocki, Rob Herring, Li Yang, Mark Rutland,
Pavel Machek, Huang Anson
Cc: Li Biwen, Len Brown, devicetree, Greg Kroah-Hartman, linux-pm,
linux-kernel, Ran Wang, linuxppc-dev, linux-arm-kernel
The NXP's QorIQ processors based on ARM Core have RCPM module
(Run Control and Power Management), which performs system level
tasks associated with power management such as wakeup source control.
Note that this driver will not support PowerPC based QorIQ processors,
and it depends on PM wakeup source framework which provide collect
wake information.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Change in v10:
- Add 'Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>'
to commit message.
- Supplement commit message to clarify that this RCPM driver is for
Arm based QorIQ processors only, will not support PowerPC based
QorIQ.
- Add ARM dependency for 'config FSL_RCPM'
- Remove 'pr_debug("%s doesn't refer to this rcpm\n", ws->name);'
- Move IPPDEXPCRn accessing out of for_each_wakeup_source(ws) loop,
do it once.
Change in v9:
- Add kerneldoc for rcpm_pm_prepare().
- Use pr_debug() to replace dev_info(), to print message when decide
skip current wakeup object, this is mainly for debugging (in order
to detect potential improper implementation on device tree which
might cause this skip).
- Refactor looping implementation in rcpm_pm_prepare(), add more
comments to help clarify.
Change in v8:
- Adjust related API usage to meet wakeup.c's update in patch 1/3.
- Add sanity checking for the case of ws->dev or ws->dev->parent
is null.
Change in v7:
- Replace 'ws->dev' with 'ws->dev->parent' to get aligned with
c8377adfa781 ("PM / wakeup: Show wakeup sources stats in sysfs")
- Remove '+obj-y += ftm_alarm.o' since it is wrong.
- Cosmetic work.
Change in v6:
- Adjust related API usage to meet wakeup.c's update in patch 1/3.
Change in v5:
- Fix v4 regression of the return value of wakeup_source_get_next()
didn't pass to ws in while loop.
- Rename wakeup_source member 'attached_dev' to 'dev'.
- Rename property 'fsl,#rcpm-wakeup-cells' to '#fsl,rcpm-wakeup-cells'.
please see https://lore.kernel.org/patchwork/patch/1101022/
Change in v4:
- Remove extra ',' in author line of rcpm.c
- Update usage of wakeup_source_get_next() to be less confusing to the
reader, code logic remain the same.
Change in v3:
- Some whitespace ajdustment.
Change in v2:
- Rebase Kconfig and Makefile update to latest mainline.
drivers/soc/fsl/Kconfig | 10 ++++
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/rcpm.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 drivers/soc/fsl/rcpm.c
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index f9ad8ad..4df32bc 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -40,4 +40,14 @@ config DPAA2_CONSOLE
/dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
which can be used to dump the Management Complex and AIOP
firmware logs.
+
+config FSL_RCPM
+ bool "Freescale RCPM support"
+ depends on PM_SLEEP && (ARM || ARM64)
+ help
+ The NXP QorIQ Processors based on ARM Core have RCPM module
+ (Run Control and Power Management), which performs all device-level
+ tasks associated with power management, such as wakeup source control.
+ Note that currently this driver will not support PowerPC based
+ QorIQ processor.
endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 71dee8d..906f1cd 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_RCPM) += rcpm.o
obj-$(CONFIG_FSL_GUTS) += guts.o
obj-$(CONFIG_FSL_MC_DPIO) += dpio/
obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o
diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
new file mode 100644
index 0000000..a093dbe
--- /dev/null
+++ b/drivers/soc/fsl/rcpm.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rcpm.c - Freescale QorIQ RCPM driver
+//
+// Copyright 2019 NXP
+//
+// Author: Ran Wang <ran.wang_1@nxp.com>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/kernel.h>
+
+#define RCPM_WAKEUP_CELL_MAX_SIZE 7
+
+struct rcpm {
+ unsigned int wakeup_cells;
+ void __iomem *ippdexpcr_base;
+ bool little_endian;
+};
+
+/**
+ * rcpm_pm_prepare - performs device-level tasks associated with power
+ * management, such as programming related to the wakeup source control.
+ * @dev: Device to handle.
+ *
+ */
+static int rcpm_pm_prepare(struct device *dev)
+{
+ int i, ret, idx;
+ void __iomem *base;
+ struct wakeup_source *ws;
+ struct rcpm *rcpm;
+ struct device_node *np = dev->of_node;
+ u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
+ u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
+
+ rcpm = dev_get_drvdata(dev);
+ if (!rcpm)
+ return -EINVAL;
+
+ base = rcpm->ippdexpcr_base;
+ idx = wakeup_sources_read_lock();
+
+ /* Begin with first registered wakeup source */
+ for_each_wakeup_source(ws) {
+
+ /* skip object which is not attached to device */
+ if (!ws->dev || !ws->dev->parent)
+ continue;
+
+ ret = device_property_read_u32_array(ws->dev->parent,
+ "fsl,rcpm-wakeup", value,
+ rcpm->wakeup_cells + 1);
+
+ /* Wakeup source should refer to current rcpm device */
+ if (ret || (np->phandle != value[0]))
+ continue;
+
+ /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
+ * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
+ * of wakeup source IP contains an integer array: <phandle to
+ * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting,
+ * IPPDEXPCR2 setting, etc>.
+ *
+ * So we will go thought them to collect setting data.
+ */
+ for (i = 0; i < rcpm->wakeup_cells; i++)
+ setting[i] |= value[i + 1];
+ }
+
+ wakeup_sources_read_unlock(idx);
+
+ /* Program all IPPDEXPCRn once */
+ for (i = 0; i < rcpm->wakeup_cells; i++) {
+ u32 tmp = setting[i];
+ void __iomem *address = base + i * 4;
+
+ if (!tmp)
+ continue;
+
+ /* We can only OR related bits */
+ if (rcpm->little_endian) {
+ tmp |= ioread32(address);
+ iowrite32(tmp, address);
+ } else {
+ tmp |= ioread32be(address);
+ iowrite32be(tmp, address);
+ }
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops rcpm_pm_ops = {
+ .prepare = rcpm_pm_prepare,
+};
+
+static int rcpm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *r;
+ struct rcpm *rcpm;
+ int ret;
+
+ rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
+ if (!rcpm)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(rcpm->ippdexpcr_base)) {
+ ret = PTR_ERR(rcpm->ippdexpcr_base);
+ return ret;
+ }
+
+ rcpm->little_endian = device_property_read_bool(
+ &pdev->dev, "little-endian");
+
+ ret = device_property_read_u32(&pdev->dev,
+ "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(&pdev->dev, rcpm);
+
+ return 0;
+}
+
+static const struct of_device_id rcpm_of_match[] = {
+ { .compatible = "fsl,qoriq-rcpm-2.1+", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rcpm_of_match);
+
+static struct platform_driver rcpm_driver = {
+ .driver = {
+ .name = "rcpm",
+ .of_match_table = rcpm_of_match,
+ .pm = &rcpm_pm_ops,
+ },
+ .probe = rcpm_probe,
+};
+
+module_platform_driver(rcpm_driver);
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object.
2019-10-24 9:26 [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-10-24 9:26 ` [PATCH v10 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
2019-10-24 9:26 ` [PATCH v10 3/3] soc: fsl: add RCPM driver Ran Wang
@ 2019-10-29 21:19 ` Li Yang
2 siblings, 0 replies; 4+ messages in thread
From: Li Yang @ 2019-10-29 21:19 UTC (permalink / raw)
To: Ran Wang
Cc: Mark Rutland, Li Biwen, Huang Anson, Len Brown,
Greg Kroah-Hartman, linux-pm, Rafael J . Wysocki, lkml,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Rob Herring, Pavel Machek, linuxppc-dev,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 24, 2019 at 4:29 AM Ran Wang <ran.wang_1@nxp.com> wrote:
>
> Some user might want to go through all registered wakeup sources
> and doing things accordingly. For example, SoC PM driver might need to
> do HW programming to prevent powering down specific IP which wakeup
> source depending on. So add this API to help walk through all registered
> wakeup source objects on that list and return them one by one.
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Series applied to soc/fsl for next. Thanks.
Regards,
Leo
> ---
> Change in v10:
> - Add 'Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>'
> to commit message.
>
> Change in v9:
> - Supplement comments for wakeup_sources_read_lock(),
> wakeup_sources_read_unlock, wakeup_sources_walk_start and
> wakeup_sources_walk_next().
>
> Change in v8:
> - Rename wakeup_source_get_next() to wakeup_sources_walk_next().
> - Add wakeup_sources_read_lock() to take over locking job of
> wakeup_source_get_star().
> - Rename wakeup_source_get_start() to wakeup_sources_walk_start().
> - Replace wakeup_source_get_stop() with wakeup_sources_read_unlock().
> - Define macro for_each_wakeup_source(ws).
>
> Change in v7:
> - Remove define of member *dev in wake_irq to fix conflict with commit
> c8377adfa781 ("PM / wakeup: Show wakeup sources stats in sysfs"), user
> will use ws->dev->parent instead.
> - Remove '#include <linux/of_device.h>' because it is not used.
>
> Change in v6:
> - Add wakeup_source_get_star() and wakeup_source_get_stop() to aligned
> with wakeup_sources_stats_seq_start/nex/stop.
>
> Change in v5:
> - Update commit message, add decription of walk through all wakeup
> source objects.
> - Add SCU protection in function wakeup_source_get_next().
> - Rename wakeup_source member 'attached_dev' to 'dev' and move it up
> (before wakeirq).
>
> Change in v4:
> - None.
>
> Change in v3:
> - Adjust indentation of *attached_dev;.
>
> Change in v2:
> - None.
>
> drivers/base/power/wakeup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/pm_wakeup.h | 9 ++++++++
> 2 files changed, 63 insertions(+)
>
> diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
> index 5817b51..70a9edb 100644
> --- a/drivers/base/power/wakeup.c
> +++ b/drivers/base/power/wakeup.c
> @@ -248,6 +248,60 @@ void wakeup_source_unregister(struct wakeup_source *ws)
> EXPORT_SYMBOL_GPL(wakeup_source_unregister);
>
> /**
> + * wakeup_sources_read_lock - Lock wakeup source list for read.
> + *
> + * Returns an index of srcu lock for struct wakeup_srcu.
> + * This index must be passed to the matching wakeup_sources_read_unlock().
> + */
> +int wakeup_sources_read_lock(void)
> +{
> + return srcu_read_lock(&wakeup_srcu);
> +}
> +EXPORT_SYMBOL_GPL(wakeup_sources_read_lock);
> +
> +/**
> + * wakeup_sources_read_unlock - Unlock wakeup source list.
> + * @idx: return value from corresponding wakeup_sources_read_lock()
> + */
> +void wakeup_sources_read_unlock(int idx)
> +{
> + srcu_read_unlock(&wakeup_srcu, idx);
> +}
> +EXPORT_SYMBOL_GPL(wakeup_sources_read_unlock);
> +
> +/**
> + * wakeup_sources_walk_start - Begin a walk on wakeup source list
> + *
> + * Returns first object of the list of wakeup sources.
> + *
> + * Note that to be safe, wakeup sources list needs to be locked by calling
> + * wakeup_source_read_lock() for this.
> + */
> +struct wakeup_source *wakeup_sources_walk_start(void)
> +{
> + struct list_head *ws_head = &wakeup_sources;
> +
> + return list_entry_rcu(ws_head->next, struct wakeup_source, entry);
> +}
> +EXPORT_SYMBOL_GPL(wakeup_sources_walk_start);
> +
> +/**
> + * wakeup_sources_walk_next - Get next wakeup source from the list
> + * @ws: Previous wakeup source object
> + *
> + * Note that to be safe, wakeup sources list needs to be locked by calling
> + * wakeup_source_read_lock() for this.
> + */
> +struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws)
> +{
> + struct list_head *ws_head = &wakeup_sources;
> +
> + return list_next_or_null_rcu(ws_head, &ws->entry,
> + struct wakeup_source, entry);
> +}
> +EXPORT_SYMBOL_GPL(wakeup_sources_walk_next);
> +
> +/**
> * device_wakeup_attach - Attach a wakeup source object to a device object.
> * @dev: Device to handle.
> * @ws: Wakeup source object to attach to @dev.
> diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
> index 661efa0..aa3da66 100644
> --- a/include/linux/pm_wakeup.h
> +++ b/include/linux/pm_wakeup.h
> @@ -63,6 +63,11 @@ struct wakeup_source {
> bool autosleep_enabled:1;
> };
>
> +#define for_each_wakeup_source(ws) \
> + for ((ws) = wakeup_sources_walk_start(); \
> + (ws); \
> + (ws) = wakeup_sources_walk_next((ws)))
> +
> #ifdef CONFIG_PM_SLEEP
>
> /*
> @@ -92,6 +97,10 @@ extern void wakeup_source_remove(struct wakeup_source *ws);
> extern struct wakeup_source *wakeup_source_register(struct device *dev,
> const char *name);
> extern void wakeup_source_unregister(struct wakeup_source *ws);
> +extern int wakeup_sources_read_lock(void);
> +extern void wakeup_sources_read_unlock(int idx);
> +extern struct wakeup_source *wakeup_sources_walk_start(void);
> +extern struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws);
> extern int device_wakeup_enable(struct device *dev);
> extern int device_wakeup_disable(struct device *dev);
> extern void device_set_wakeup_capable(struct device *dev, bool capable);
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-29 22:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-24 9:26 [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Ran Wang
2019-10-24 9:26 ` [PATCH v10 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define Ran Wang
2019-10-24 9:26 ` [PATCH v10 3/3] soc: fsl: add RCPM driver Ran Wang
2019-10-29 21:19 ` [PATCH v10 1/3] PM: wakeup: Add routine to help fetch wakeup source object Li Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).