From: Hari Bathini <hbathini@linux.ibm.com>
To: mahesh@linux.vnet.ibm.com
Cc: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>,
linuxppc-dev <linuxppc-dev@ozlabs.org>, Oliver <oohall@gmail.com>,
Vasant Hegde <hegdevasant@linux.ibm.com>,
Stewart Smith <stewart@linux.ibm.com>,
Daniel Axtens <dja@axtens.net>
Subject: Re: [PATCH v4 12/25] powernv/fadump: define register/un-register callback functions
Date: Wed, 14 Aug 2019 12:41:50 +0530 [thread overview]
Message-ID: <bf71b0c6-ebee-d167-3814-17b1b3acc54e@linux.ibm.com> (raw)
In-Reply-To: <20190813143413.lzhpqbx43d4nefpa@in.ibm.com>
On 13/08/19 8:04 PM, Mahesh J Salgaonkar wrote:
> On 2019-07-16 17:03:23 Tue, Hari Bathini wrote:
>> Make OPAL calls to register and un-register with firmware for MPIPL.
>>
>> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
>> ---
>> arch/powerpc/platforms/powernv/opal-fadump.c | 71 +++++++++++++++++++++++++-
>> 1 file changed, 69 insertions(+), 2 deletions(-)
>>
> [...]
>> @@ -88,12 +104,63 @@ static int opal_fadump_setup_kernel_metadata(struct fw_dump *fadump_conf)
>>
>> static int opal_fadump_register_fadump(struct fw_dump *fadump_conf)
>> {
>> - return -EIO;
>> + int i, err = -EIO;
>> + s64 rc;
>> +
>> + for (i = 0; i < opal_fdm->region_cnt; i++) {
>> + rc = opal_mpipl_update(OPAL_MPIPL_ADD_RANGE,
>> + opal_fdm->rgn[i].src,
>> + opal_fdm->rgn[i].dest,
>> + opal_fdm->rgn[i].size);
>> + if (rc != OPAL_SUCCESS)
>
> You may want to remove ranges which has been added so far on error and reset
> opal_fdm->registered_regions.
Thanks for catching this, Mahesh.
Will update..
>
>> + break;
>> +
>> + opal_fdm->registered_regions++;
>> + }
>> +
>> + switch (rc) {
>> + case OPAL_SUCCESS:
>> + pr_info("Registration is successful!\n");
>> + fadump_conf->dump_registered = 1;
>> + err = 0;
>> + break;
>> + case OPAL_UNSUPPORTED:
>> + pr_err("Support not available.\n");
>> + fadump_conf->fadump_supported = 0;
>> + fadump_conf->fadump_enabled = 0;
>> + break;
>> + case OPAL_INTERNAL_ERROR:
>> + pr_err("Failed to register. Hardware Error(%lld).\n", rc);
>> + break;
>> + case OPAL_PARAMETER:
>> + pr_err("Failed to register. Parameter Error(%lld).\n", rc);
>> + break;
>> + case OPAL_PERMISSION:
>
> You may want to remove this check. With latest opal mpipl patches
> opal_mpipl_update() no more returns OPAL_PERMISSION.
>
> Even if opal does, we can not say fadump already registered just by
> looking at return status of single entry addition.
Sure.
Thanks
Hari
next prev parent reply other threads:[~2019-08-14 7:13 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-16 11:31 [PATCH v4 00/25] Add FADump support on PowerNV platform Hari Bathini
2019-07-16 11:32 ` [PATCH v4 01/25] powerpc/fadump: move internal macros/definitions to a new header Hari Bathini
2019-07-16 11:32 ` [PATCH v4 02/25] powerpc/fadump: move internal code to a new file Hari Bathini
2019-07-16 11:32 ` [PATCH v4 03/25] powerpc/fadump: Improve fadump documentation Hari Bathini
2019-08-12 6:55 ` Mahesh Jagannath Salgaonkar
2019-07-16 11:32 ` [PATCH v4 04/25] pseries/fadump: move rtas specific definitions to platform code Hari Bathini
2019-07-16 11:32 ` [PATCH v4 05/25] pseries/fadump: introduce callbacks for platform specific operations Hari Bathini
2019-08-12 9:42 ` Mahesh J Salgaonkar
2019-08-14 6:39 ` Hari Bathini
2019-07-16 11:32 ` [PATCH v4 06/25] pseries/fadump: define register/un-register callback functions Hari Bathini
2019-08-12 16:01 ` Mahesh J Salgaonkar
2019-08-14 6:41 ` Hari Bathini
2019-07-16 11:32 ` [PATCH v4 07/25] pseries/fadump: move out platform specific support from generic code Hari Bathini
2019-08-13 5:16 ` Mahesh J Salgaonkar
2019-07-16 11:32 ` [PATCH v4 08/25] powerpc/fadump: use FADump instead of fadump for how it is pronounced Hari Bathini
2019-07-16 11:33 ` [PATCH v4 09/25] opal: add MPIPL interface definitions Hari Bathini
2019-07-16 11:33 ` [PATCH v4 10/25] powernv/fadump: add fadump support on powernv Hari Bathini
2019-07-16 11:33 ` [PATCH v4 11/25] powernv/fadump: register kernel metadata address with opal Hari Bathini
2019-08-13 10:41 ` Mahesh J Salgaonkar
2019-08-14 7:06 ` Hari Bathini
2019-08-14 10:21 ` Mahesh Jagannath Salgaonkar
2019-08-19 15:49 ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 12/25] powernv/fadump: define register/un-register callback functions Hari Bathini
2019-08-13 14:34 ` Mahesh J Salgaonkar
2019-08-14 7:11 ` Hari Bathini [this message]
2019-07-16 11:33 ` [PATCH v4 13/25] powernv/fadump: support copying multiple kernel memory regions Hari Bathini
2019-08-13 15:03 ` Mahesh J Salgaonkar
2019-08-14 7:14 ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 14/25] powernv/fadump: process the crashdump by exporting it as /proc/vmcore Hari Bathini
2019-08-14 10:18 ` Mahesh J Salgaonkar
2019-08-14 11:11 ` Hari Bathini
2019-07-16 11:33 ` [PATCH v4 15/25] powerpc/fadump: Update documentation about OPAL platform support Hari Bathini
2019-07-16 11:33 ` [PATCH v4 16/25] powerpc/fadump: consider reserved ranges while reserving memory Hari Bathini
2019-07-16 11:34 ` [PATCH v4 17/25] powerpc/fadump: consider reserved ranges while releasing memory Hari Bathini
2019-07-16 11:34 ` [PATCH v4 18/25] powernv/fadump: process architected register state data provided by firmware Hari Bathini
2019-08-14 17:15 ` Mahesh J Salgaonkar
2019-08-16 2:38 ` Hari Bathini
2019-07-16 11:34 ` [PATCH v4 19/25] powernv/fadump: add support to preserve crash data on FADUMP disabled kernel Hari Bathini
2019-08-16 5:01 ` Mahesh J Salgaonkar
2019-07-16 11:34 ` [PATCH v4 20/25] powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP Hari Bathini
2019-07-16 11:34 ` [PATCH v4 21/25] powernv/opalcore: export /sys/firmware/opal/core for analysing opal crashes Hari Bathini
2019-07-16 11:34 ` [PATCH v4 22/25] powernv/fadump: Warn before processing partial crashdump Hari Bathini
2019-08-16 5:59 ` Mahesh J Salgaonkar
2019-07-16 11:34 ` [PATCH v4 23/25] powernv/opalcore: provide an option to invalidate /sys/firmware/opal/core file Hari Bathini
2019-07-16 11:34 ` [PATCH v4 24/25] powernv/fadump: consider f/w load area Hari Bathini
2019-07-16 11:35 ` [PATCH v4 25/25] powernv/fadump: update documentation about option to release opalcore Hari Bathini
2019-07-19 6:19 ` [PATCH v4 00/25] Add FADump support on PowerNV platform Hari Bathini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf71b0c6-ebee-d167-3814-17b1b3acc54e@linux.ibm.com \
--to=hbathini@linux.ibm.com \
--cc=ananth@linux.ibm.com \
--cc=dja@axtens.net \
--cc=hegdevasant@linux.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=mahesh@linux.vnet.ibm.com \
--cc=npiggin@gmail.com \
--cc=oohall@gmail.com \
--cc=stewart@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).