* [PATCH v2 00/18] genirq: Remove setup_irq()
@ 2020-02-24 0:47 afzal mohammed
2020-02-24 0:51 ` [PATCH v2 10/18] powerpc: Replace setup_irq() by request_irq() afzal mohammed
0 siblings, 1 reply; 2+ messages in thread
From: afzal mohammed @ 2020-02-24 0:47 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel, linux-samsung-soc, x86, linux-sh,
linux-s390, linuxppc-dev, linux-parisc, linux-mips, linux-m68k,
linux-ia64, linux-hexagon, linux-c6x-dev, linux-omap,
linux-alpha
Cc: Thomas Gleixner
While trying to understand internals of irq handling, came across a
thread [1] in which tglx was referring to avoid usage of setup_irq().
The early boot setup_irq() invocations happen either via 'init_IRQ()'
or 'time_init()', while memory allocators are ready by 'mm_init()'.
Hence instances of setup_irq() are replaced by request_irq() &
setup_irq() [along with remove_irq()] definition deleted in the last
patch.
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
Build & boot tested on ARM & x86_64 platforms (ensured that on the
machines used for testing, modifications made in this series is being
exercised at runtime)
Much of the changes were created using Coccinelle with an intention
to learn it. But not everything could be automated.
Searching with 'git grep -n '\Wsetup_irq('' & avoiding the irrelevant
ones, 153 invocation's of setup_irq() were found. 112 could be replaced
w/ cocci, of which in a few files some desired hunks were missing or
not as expected, these were fixed up manually. Also the remaining 41
had to be done manually.
Although cocci could replace 112, because of line continue not
happening at paranthesis for request_irq(), around 80 had to be
manually aligned in the request_irq() statement.
So though many changes could be automated, there are a considerable
amount of manual changes, please review carefully especially mips &
alpha.
Usage of setup_percpu_irq() is untouched w/ this series.
There are 2 checkpatch warning about usage of BUG(), they were already
present w/ setup_irq(), status quo maintained.
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Since changes from v1 are trivial as below, tags received has been
applied to the relevant patches, if any objections, please shout.
v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* m68k: remove now irrelevant comment separation comment lines
* Commit message massage
afzal mohammed (18):
alpha: replace setup_irq() by request_irq()
ARM: replace setup_irq() by request_irq()
c6x: replace setup_irq() by request_irq()
hexagon: replace setup_irq() by request_irq()
ia64: replace setup_irq() by request_irq()
m68k: Replace setup_irq() by request_irq()
microblaze: Replace setup_irq() by request_irq()
MIPS: Replace setup_irq() by request_irq()
parisc: Replace setup_irq() by request_irq()
powerpc: Replace setup_irq() by request_irq()
s390: replace setup_irq() by request_irq()
sh: replace setup_irq() by request_irq()
unicore32: replace setup_irq() by request_irq()
x86: Replace setup_irq() by request_irq()
xtensa: replace setup_irq() by request_irq()
clocksource: Replace setup_irq() by request_irq()
irqchip: Replace setup_irq() by request_irq()
genirq: Remove setup_irq() and remove_irq()
arch/alpha/kernel/irq_alpha.c | 29 ++-------
arch/alpha/kernel/irq_i8259.c | 8 +--
arch/alpha/kernel/irq_impl.h | 7 +--
arch/alpha/kernel/irq_pyxis.c | 3 +-
arch/alpha/kernel/sys_alcor.c | 3 +-
arch/alpha/kernel/sys_cabriolet.c | 3 +-
arch/alpha/kernel/sys_eb64p.c | 3 +-
arch/alpha/kernel/sys_marvel.c | 2 +-
arch/alpha/kernel/sys_miata.c | 6 +-
arch/alpha/kernel/sys_ruffian.c | 3 +-
arch/alpha/kernel/sys_rx164.c | 3 +-
arch/alpha/kernel/sys_sx164.c | 3 +-
arch/alpha/kernel/sys_wildfire.c | 7 +--
arch/alpha/kernel/time.c | 6 +-
arch/arm/mach-cns3xxx/core.c | 10 +---
arch/arm/mach-ebsa110/core.c | 10 +---
arch/arm/mach-ep93xx/timer-ep93xx.c | 12 ++--
arch/arm/mach-footbridge/dc21285-timer.c | 11 +---
arch/arm/mach-footbridge/isa-irq.c | 8 +--
arch/arm/mach-footbridge/isa-timer.c | 11 +---
arch/arm/mach-iop32x/time.c | 12 ++--
arch/arm/mach-mmp/time.c | 11 +---
arch/arm/mach-omap1/pm.c | 22 ++++---
arch/arm/mach-omap1/time.c | 10 +---
arch/arm/mach-omap1/timer32k.c | 10 +---
arch/arm/mach-omap2/timer.c | 11 +---
arch/arm/mach-rpc/time.c | 8 +--
arch/arm/mach-spear/time.c | 9 +--
arch/arm/plat-orion/time.c | 10 +---
arch/c6x/platforms/timer64.c | 11 +---
arch/hexagon/kernel/smp.c | 17 +++---
arch/hexagon/kernel/time.c | 11 +---
arch/ia64/kernel/irq_ia64.c | 42 +++++--------
arch/ia64/kernel/mca.c | 51 +++++-----------
arch/m68k/68000/timers.c | 11 +---
arch/m68k/coldfire/pit.c | 11 +---
arch/m68k/coldfire/sltimers.c | 19 ++----
arch/m68k/coldfire/timers.c | 21 ++-----
arch/microblaze/kernel/timer.c | 10 +---
arch/mips/alchemy/common/time.c | 11 +---
arch/mips/ar7/irq.c | 18 +++---
arch/mips/ath25/ar2315.c | 9 +--
arch/mips/ath25/ar5312.c | 9 +--
arch/mips/bcm63xx/irq.c | 38 +++++-------
arch/mips/cobalt/irq.c | 14 ++---
arch/mips/dec/setup.c | 59 ++++++++-----------
arch/mips/emma/markeins/irq.c | 20 +++----
arch/mips/include/asm/sni.h | 2 +-
arch/mips/jazz/irq.c | 12 +---
arch/mips/kernel/cevt-bcm1480.c | 11 +---
arch/mips/kernel/cevt-ds1287.c | 9 +--
arch/mips/kernel/cevt-gt641xx.c | 9 +--
arch/mips/kernel/cevt-r4k.c | 4 +-
arch/mips/kernel/cevt-sb1250.c | 11 +---
arch/mips/kernel/cevt-txx9.c | 11 +---
arch/mips/kernel/i8253.c | 10 +---
arch/mips/kernel/rtlx-mt.c | 8 +--
arch/mips/kernel/smp.c | 33 ++++-------
arch/mips/lasat/interrupt.c | 10 +---
arch/mips/loongson2ef/common/bonito-irq.c | 9 +--
.../loongson2ef/common/cs5536/cs5536_mfgpt.c | 10 +---
arch/mips/loongson2ef/fuloong-2e/irq.c | 14 ++---
arch/mips/loongson2ef/lemote-2f/irq.c | 20 ++-----
arch/mips/loongson32/common/irq.c | 21 ++++---
arch/mips/loongson32/common/time.c | 12 ++--
arch/mips/loongson64/hpet.c | 10 +---
arch/mips/mti-malta/malta-int.c | 10 +---
arch/mips/netlogic/xlr/fmn.c | 9 +--
arch/mips/pmcs-msp71xx/msp_irq.c | 28 ++++-----
arch/mips/pmcs-msp71xx/msp_smp.c | 22 ++-----
arch/mips/pmcs-msp71xx/msp_time.c | 7 ++-
arch/mips/ralink/cevt-rt3352.c | 17 +++---
arch/mips/sgi-ip22/ip22-eisa.c | 8 +--
arch/mips/sgi-ip22/ip22-int.c | 49 +++++----------
arch/mips/sgi-ip32/ip32-irq.c | 18 ++----
arch/mips/sni/a20r.c | 4 +-
arch/mips/sni/irq.c | 8 +--
arch/mips/sni/pcit.c | 8 ++-
arch/mips/sni/rm200.c | 23 +++-----
arch/mips/sni/time.c | 10 +---
arch/mips/vr41xx/common/irq.c | 9 +--
arch/parisc/kernel/irq.c | 21 ++-----
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 10 +---
arch/powerpc/platforms/8xx/cpm1.c | 9 +--
arch/powerpc/platforms/8xx/m8xx_setup.c | 9 +--
arch/powerpc/platforms/chrp/setup.c | 14 ++---
arch/powerpc/platforms/powermac/pic.c | 31 ++++------
arch/powerpc/platforms/powermac/smp.c | 9 +--
arch/s390/kernel/irq.c | 8 +--
arch/sh/boards/mach-cayman/irq.c | 18 ++----
arch/sh/drivers/dma/dma-pvr2.c | 9 +--
arch/unicore32/kernel/time.c | 11 +---
arch/x86/kernel/irqinit.c | 18 +++---
arch/x86/kernel/time.c | 10 +---
arch/xtensa/kernel/smp.c | 8 +--
arch/xtensa/kernel/time.c | 10 +---
drivers/clocksource/bcm2835_timer.c | 8 +--
drivers/clocksource/bcm_kona_timer.c | 10 +---
drivers/clocksource/dw_apb_timer.c | 11 +---
drivers/clocksource/exynos_mct.c | 12 ++--
drivers/clocksource/mxs_timer.c | 10 +---
drivers/clocksource/nomadik-mtu.c | 11 +---
drivers/clocksource/samsung_pwm_timer.c | 12 ++--
drivers/clocksource/timer-atlas7.c | 50 ++++++++--------
drivers/clocksource/timer-cs5535.c | 10 +---
drivers/clocksource/timer-efm32.c | 10 +---
drivers/clocksource/timer-fsl-ftm.c | 10 +---
drivers/clocksource/timer-imx-gpt.c | 10 +---
drivers/clocksource/timer-integrator-ap.c | 11 +---
drivers/clocksource/timer-meson6.c | 11 +---
drivers/clocksource/timer-orion.c | 9 +--
drivers/clocksource/timer-prima2.c | 11 +---
drivers/clocksource/timer-pxa.c | 10 +---
drivers/clocksource/timer-sp804.c | 11 +---
drivers/clocksource/timer-u300.c | 9 +--
drivers/clocksource/timer-vf-pit.c | 10 +---
drivers/clocksource/timer-vt8500.c | 11 +---
drivers/clocksource/timer-zevio.c | 13 ++--
drivers/irqchip/irq-i8259.c | 9 +--
drivers/irqchip/irq-ingenic.c | 11 ++--
drivers/parisc/eisa.c | 8 +--
drivers/s390/cio/airq.c | 8 +--
drivers/s390/cio/cio.c | 8 +--
include/linux/dw_apb_timer.h | 1 -
include/linux/irq.h | 2 -
kernel/irq/manage.c | 44 --------------
126 files changed, 528 insertions(+), 1117 deletions(-)
base-commit: v5.6-rc1
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH v2 10/18] powerpc: Replace setup_irq() by request_irq()
2020-02-24 0:47 [PATCH v2 00/18] genirq: Remove setup_irq() afzal mohammed
@ 2020-02-24 0:51 ` afzal mohammed
0 siblings, 0 replies; 2+ messages in thread
From: afzal mohammed @ 2020-02-24 0:51 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel; +Cc: Scott Wood, Paul Mackerras, Thomas Gleixner
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # for 8xx parts
---
v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 10 +++-----
arch/powerpc/platforms/8xx/cpm1.c | 9 ++-----
arch/powerpc/platforms/8xx/m8xx_setup.c | 9 ++-----
arch/powerpc/platforms/chrp/setup.c | 14 ++++------
arch/powerpc/platforms/powermac/pic.c | 31 ++++++++++-------------
arch/powerpc/platforms/powermac/smp.c | 9 ++-----
6 files changed, 27 insertions(+), 55 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 6b1436abe9b1..1c5598877d70 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -218,12 +218,6 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
{
return IRQ_HANDLED;
}
-
-static struct irqaction mpc85xxcds_8259_irqaction = {
- .handler = mpc85xx_8259_cascade_action,
- .flags = IRQF_SHARED | IRQF_NO_THREAD,
- .name = "8259 cascade",
-};
#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
@@ -271,7 +265,9 @@ static int mpc85xx_cds_8259_attach(void)
* disabled when the last user of the shared IRQ line frees their
* interrupt.
*/
- if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
+ ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
+ IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade", NULL);
+ if (ret) {
printk(KERN_ERR "Failed to setup cascade interrupt\n");
return ret;
}
diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
index a43ee7d1ff85..4db4ca2e1222 100644
--- a/arch/powerpc/platforms/8xx/cpm1.c
+++ b/arch/powerpc/platforms/8xx/cpm1.c
@@ -120,12 +120,6 @@ static irqreturn_t cpm_error_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
-static struct irqaction cpm_error_irqaction = {
- .handler = cpm_error_interrupt,
- .flags = IRQF_NO_THREAD,
- .name = "error",
-};
-
static const struct irq_domain_ops cpm_pic_host_ops = {
.map = cpm_pic_host_map,
};
@@ -187,7 +181,8 @@ unsigned int __init cpm_pic_init(void)
if (!eirq)
goto end;
- if (setup_irq(eirq, &cpm_error_irqaction))
+ if (request_irq(eirq, cpm_error_interrupt, IRQF_NO_THREAD, "error",
+ NULL))
printk(KERN_ERR "Could not allocate CPM error IRQ!");
setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index f1c805c8adbc..df4d57d07f9a 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -39,12 +39,6 @@ static irqreturn_t timebase_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
-static struct irqaction tbint_irqaction = {
- .handler = timebase_interrupt,
- .flags = IRQF_NO_THREAD,
- .name = "tbint",
-};
-
/* per-board overridable init_internal_rtc() function. */
void __init __attribute__ ((weak))
init_internal_rtc(void)
@@ -157,7 +151,8 @@ void __init mpc8xx_calibrate_decr(void)
(TBSCR_TBF | TBSCR_TBE));
immr_unmap(sys_tmr2);
- if (setup_irq(virq, &tbint_irqaction))
+ if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
+ NULL))
panic("Could not allocate timer IRQ!");
}
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index fcf6f2342ef4..3f4e324f1d67 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -451,13 +451,6 @@ static void __init chrp_find_openpic(void)
of_node_put(np);
}
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
-static struct irqaction xmon_irqaction = {
- .handler = xmon_irq,
- .name = "XMON break",
-};
-#endif
-
static void __init chrp_find_8259(void)
{
struct device_node *np, *pic = NULL;
@@ -541,8 +534,11 @@ static void __init chrp_init_IRQ(void)
if (of_node_is_type(kbd->parent, "adb"))
break;
of_node_put(kbd);
- if (kbd)
- setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+ if (kbd) {
+ if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break",
+ NULL))
+ pr_err("%s: request_irq() failed\n", "XMON break");
+ }
#endif
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 2e969073473d..a08b0ddc2764 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -250,20 +250,6 @@ static unsigned int pmac_pic_get_irq(void)
return irq_linear_revmap(pmac_pic_host, irq);
}
-#ifdef CONFIG_XMON
-static struct irqaction xmon_action = {
- .handler = xmon_irq,
- .flags = IRQF_NO_THREAD,
- .name = "NMI - XMON"
-};
-#endif
-
-static struct irqaction gatwick_cascade_action = {
- .handler = gatwick_action,
- .flags = IRQF_NO_THREAD,
- .name = "cascade",
-};
-
static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node,
enum irq_domain_bus_token bus_token)
{
@@ -384,12 +370,17 @@ static void __init pmac_pic_probe_oldstyle(void)
out_le32(&pmac_irq_hw[i]->enable, 0);
/* Hookup cascade irq */
- if (slave && pmac_irq_cascade)
- setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
+ if (slave && pmac_irq_cascade) {
+ if (request_irq(pmac_irq_cascade, gatwick_action,
+ IRQF_NO_THREAD, "cascade", NULL))
+ pr_err("%s: request_irq() failed\n", "cascade");
+ }
printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
#ifdef CONFIG_XMON
- setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
+ if (request_irq(irq_create_mapping(NULL, 20), xmon_irq, IRQF_NO_THREAD,
+ "NMI - XMON", NULL))
+ pr_err("%s: request_irq() failed\n", "NMI - XMON");
#endif
}
@@ -441,7 +432,11 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
nmi_irq = irq_of_parse_and_map(pswitch, 0);
if (nmi_irq) {
mpic_irq_set_priority(nmi_irq, 9);
- setup_irq(nmi_irq, &xmon_action);
+ if (request_irq(nmi_irq, xmon_irq, IRQF_NO_THREAD,
+ "NMI - XMON", NULL)) {
+ pr_err("%s: request_irq() failed\n",
+ "NMI - XMON");
+ }
}
of_node_put(pswitch);
}
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index f95fbdee6efe..0121b31a9e7b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -399,12 +399,6 @@ static int __init smp_psurge_kick_cpu(int nr)
return 0;
}
-static struct irqaction psurge_irqaction = {
- .handler = psurge_ipi_intr,
- .flags = IRQF_PERCPU | IRQF_NO_THREAD,
- .name = "primary IPI",
-};
-
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
if (cpu_nr != 0 || !psurge_start)
@@ -413,7 +407,8 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
/* reset the entry point so if we get another intr we won't
* try to startup again */
out_be32(psurge_start, 0x100);
- if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
+ if (request_irq(irq_create_mapping(NULL, 30), psurge_ipi_intr,
+ IRQF_PERCPU | IRQF_NO_THREAD, "primary IPI", NULL))
printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-24 0:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-24 0:47 [PATCH v2 00/18] genirq: Remove setup_irq() afzal mohammed
2020-02-24 0:51 ` [PATCH v2 10/18] powerpc: Replace setup_irq() by request_irq() afzal mohammed
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).