* [PATCH v2] powerpc: make ALTIVEC select PPC_FPU
@ 2021-04-21 2:56 Randy Dunlap
2021-04-21 5:19 ` Christophe Leroy
0 siblings, 1 reply; 3+ messages in thread
From: Randy Dunlap @ 2021-04-21 2:56 UTC (permalink / raw)
To: linux-kernel; +Cc: kernel test robot, Randy Dunlap, linuxppc-dev
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
there are build errors:
drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
enable_kernel_fp();
../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
637 | put_vr(rn, &u.v);
| ^~~~~~
../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
660 | get_vr(rn, &u.v);
| ^~~~~~
In theory ALTIVEC is independent of PPC_FPU but in practice nobody
is going to build such a machine, so make ALTIVEC require PPC_FPU
by selecting it.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: lkp@intel.com
---
v2: change ALTIVEC depends on PPC_FPU to select (Christophe and Michael)
arch/powerpc/platforms/86xx/Kconfig | 1 +
arch/powerpc/platforms/Kconfig.cputype | 2 ++
2 files changed, 3 insertions(+)
--- linux-next-20210416.orig/arch/powerpc/platforms/86xx/Kconfig
+++ linux-next-20210416/arch/powerpc/platforms/86xx/Kconfig
@@ -4,6 +4,7 @@ menuconfig PPC_86xx
bool "86xx-based boards"
depends on PPC_BOOK3S_32
select FSL_SOC
+ select PPC_FPU
select ALTIVEC
help
The Freescale E600 SoCs have 74xx cores.
--- linux-next-20210416.orig/arch/powerpc/platforms/Kconfig.cputype
+++ linux-next-20210416/arch/powerpc/platforms/Kconfig.cputype
@@ -186,6 +186,7 @@ config E300C3_CPU
config G4_CPU
bool "G4 (74xx)"
depends on PPC_BOOK3S_32
+ select PPC_FPU
select ALTIVEC
endchoice
@@ -310,6 +311,7 @@ config PHYS_64BIT
config ALTIVEC
bool "AltiVec Support"
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
+ select PPC_FPU
help
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] powerpc: make ALTIVEC select PPC_FPU
2021-04-21 2:56 [PATCH v2] powerpc: make ALTIVEC select PPC_FPU Randy Dunlap
@ 2021-04-21 5:19 ` Christophe Leroy
2021-04-21 20:59 ` Randy Dunlap
0 siblings, 1 reply; 3+ messages in thread
From: Christophe Leroy @ 2021-04-21 5:19 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel; +Cc: linuxppc-dev, kernel test robot
Le 21/04/2021 à 04:56, Randy Dunlap a écrit :
> On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
> there are build errors:
>
> drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
> enable_kernel_fp();
> ../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
> ../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
> 637 | put_vr(rn, &u.v);
> | ^~~~~~
> ../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
> ../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
> 660 | get_vr(rn, &u.v);
> | ^~~~~~
>
> In theory ALTIVEC is independent of PPC_FPU but in practice nobody
> is going to build such a machine, so make ALTIVEC require PPC_FPU
> by selecting it.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
> Cc: Segher Boessenkool <segher@kernel.crashing.org>
> Cc: lkp@intel.com
> ---
> v2: change ALTIVEC depends on PPC_FPU to select (Christophe and Michael)
>
> arch/powerpc/platforms/86xx/Kconfig | 1 +
> arch/powerpc/platforms/Kconfig.cputype | 2 ++
> 2 files changed, 3 insertions(+)
>
> --- linux-next-20210416.orig/arch/powerpc/platforms/86xx/Kconfig
> +++ linux-next-20210416/arch/powerpc/platforms/86xx/Kconfig
> @@ -4,6 +4,7 @@ menuconfig PPC_86xx
> bool "86xx-based boards"
> depends on PPC_BOOK3S_32
> select FSL_SOC
> + select PPC_FPU
Now that ALTIVEC selects PPC_FPU by itself, I don't think you need that.
> select ALTIVEC
> help
> The Freescale E600 SoCs have 74xx cores.
> --- linux-next-20210416.orig/arch/powerpc/platforms/Kconfig.cputype
> +++ linux-next-20210416/arch/powerpc/platforms/Kconfig.cputype
> @@ -186,6 +186,7 @@ config E300C3_CPU
> config G4_CPU
> bool "G4 (74xx)"
> depends on PPC_BOOK3S_32
> + select PPC_FPU
Same
> select ALTIVEC
>
> endchoice
> @@ -310,6 +311,7 @@ config PHYS_64BIT
> config ALTIVEC
> bool "AltiVec Support"
> depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
> + select PPC_FPU
> help
> This option enables kernel support for the Altivec extensions to the
> PowerPC processor. The kernel currently supports saving and restoring
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] powerpc: make ALTIVEC select PPC_FPU
2021-04-21 5:19 ` Christophe Leroy
@ 2021-04-21 20:59 ` Randy Dunlap
0 siblings, 0 replies; 3+ messages in thread
From: Randy Dunlap @ 2021-04-21 20:59 UTC (permalink / raw)
To: Christophe Leroy, linux-kernel; +Cc: linuxppc-dev, kernel test robot
On 4/20/21 10:19 PM, Christophe Leroy wrote:
>
>
> Le 21/04/2021 à 04:56, Randy Dunlap a écrit :
>> On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
>> there are build errors:
>>
>> drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
>> enable_kernel_fp();
>> ../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
>> ../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
>> 637 | put_vr(rn, &u.v);
>> | ^~~~~~
>> ../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
>> ../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
>> 660 | get_vr(rn, &u.v);
>> | ^~~~~~
>>
>> In theory ALTIVEC is independent of PPC_FPU but in practice nobody
>> is going to build such a machine, so make ALTIVEC require PPC_FPU
>> by selecting it.
>>
>> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>> Cc: linuxppc-dev@lists.ozlabs.org
>> Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
>> Cc: Segher Boessenkool <segher@kernel.crashing.org>
>> Cc: lkp@intel.com
>> ---
>> v2: change ALTIVEC depends on PPC_FPU to select (Christophe and Michael)
>>
>> arch/powerpc/platforms/86xx/Kconfig | 1 +
>> arch/powerpc/platforms/Kconfig.cputype | 2 ++
>> 2 files changed, 3 insertions(+)
>>
>> --- linux-next-20210416.orig/arch/powerpc/platforms/86xx/Kconfig
>> +++ linux-next-20210416/arch/powerpc/platforms/86xx/Kconfig
>> @@ -4,6 +4,7 @@ menuconfig PPC_86xx
>> bool "86xx-based boards"
>> depends on PPC_BOOK3S_32
>> select FSL_SOC
>> + select PPC_FPU
>
> Now that ALTIVEC selects PPC_FPU by itself, I don't think you need that.
>
>> select ALTIVEC
>> help
>> The Freescale E600 SoCs have 74xx cores.
>> --- linux-next-20210416.orig/arch/powerpc/platforms/Kconfig.cputype
>> +++ linux-next-20210416/arch/powerpc/platforms/Kconfig.cputype
>> @@ -186,6 +186,7 @@ config E300C3_CPU
>> config G4_CPU
>> bool "G4 (74xx)"
>> depends on PPC_BOOK3S_32
>> + select PPC_FPU
>
> Same
Of course. v3 coming up.
Thanks.
>> select ALTIVEC
>> endchoice
>> @@ -310,6 +311,7 @@ config PHYS_64BIT
>> config ALTIVEC
>> bool "AltiVec Support"
>> depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
>> + select PPC_FPU
>> help
>> This option enables kernel support for the Altivec extensions to the
>> PowerPC processor. The kernel currently supports saving and restoring
>>
--
~Randy
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-21 21:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-21 2:56 [PATCH v2] powerpc: make ALTIVEC select PPC_FPU Randy Dunlap
2021-04-21 5:19 ` Christophe Leroy
2021-04-21 20:59 ` Randy Dunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).