linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: Leonardo Bras <leobras.c@gmail.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>, Joel Stanley <joel@jms.id.au>,
	Christophe Leroy <christophe.leroy@c-s.fr>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Niklas Schnelle <schnelle@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 07/11] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
Date: Mon, 10 May 2021 17:34:04 +1000	[thread overview]
Message-ID: <e4984fa0-2afe-a987-4fb8-61b878431b1f@ozlabs.ru> (raw)
In-Reply-To: <20210430163145.146984-8-leobras.c@gmail.com>



On 5/1/21 02:31, Leonardo Bras wrote:
> Add a new helper _iommu_table_setparms(), and use it in
> iommu_table_setparms() and iommu_table_setparms_lpar() to avoid duplicated
> code.
> 
> Also, setting tbl->it_ops was happening outsite iommu_table_setparms*(),
> so move it to the new helper. Since we need the iommu_table_ops to be
> declared before used, move iommu_table_lpar_multi_ops and
> iommu_table_pseries_ops to before their respective iommu_table_setparms*().
> 
> Signed-off-by: Leonardo Bras <leobras.c@gmail.com>


This does not apply anymore as it conflicts with my 4be518d838809e2135.


> ---
>   arch/powerpc/platforms/pseries/iommu.c | 100 ++++++++++++-------------
>   1 file changed, 50 insertions(+), 50 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
> index 5a70ecd579b8..89cb6e9e9f31 100644
> --- a/arch/powerpc/platforms/pseries/iommu.c
> +++ b/arch/powerpc/platforms/pseries/iommu.c
> @@ -53,6 +53,11 @@ enum {
>   	DDW_EXT_QUERY_OUT_SIZE = 2
>   };
>   
> +#ifdef CONFIG_IOMMU_API
> +static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned long *tce,
> +				enum dma_data_direction *direction, bool realmode);
> +#endif


Instead of declaring this so far from the the code which needs it, may 
be add

struct iommu_table_ops iommu_table_lpar_multi_ops;

right before iommu_table_setparms() (as the sctruct is what you actually 
want there), and you won't need to move iommu_table_pseries_ops as well.


> +
>   static struct iommu_table *iommu_pseries_alloc_table(int node)
>   {
>   	struct iommu_table *tbl;
> @@ -501,6 +506,28 @@ static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn,
>   	return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
>   }
>   
> +static inline void _iommu_table_setparms(struct iommu_table *tbl, unsigned long busno,


The underscore is confusing, may be iommu_table_do_setparms()? 
iommu_table_setparms_common()? Not sure. I cannot recall a single 
function with just one leading underscore, I suspect I was pushed back 
when I tried adding one ages ago :) "inline" seems excessive, the 
compiler will probably figure it out anyway.



> +					 unsigned long liobn, unsigned long win_addr,
> +					 unsigned long window_size, unsigned long page_shift,
> +					 unsigned long base, struct iommu_table_ops *table_ops)


Make "base" a pointer. Or, better, just keep setting it directly in 
iommu_table_setparms() rather than passing 0 around.

The same comment about "liobn" - set it in iommu_table_setparms_lpar(). 
The reviewer will see what field atters in what situation imho.



> +{
> +	tbl->it_busno = busno;
> +	tbl->it_index = liobn;
> +	tbl->it_offset = win_addr >> page_shift;
> +	tbl->it_size = window_size >> page_shift;
> +	tbl->it_page_shift = page_shift;
> +	tbl->it_base = base;
> +	tbl->it_blocksize = 16;
> +	tbl->it_type = TCE_PCI;
> +	tbl->it_ops = table_ops;
> +}
> +
> +struct iommu_table_ops iommu_table_pseries_ops = {
> +	.set = tce_build_pSeries,
> +	.clear = tce_free_pSeries,
> +	.get = tce_get_pseries
> +};
> +
>   static void iommu_table_setparms(struct pci_controller *phb,
>   				 struct device_node *dn,
>   				 struct iommu_table *tbl)
> @@ -509,8 +536,13 @@ static void iommu_table_setparms(struct pci_controller *phb,
>   	const unsigned long *basep;
>   	const u32 *sizep;
>   
> -	node = phb->dn;
> +	/* Test if we are going over 2GB of DMA space */
> +	if (phb->dma_window_base_cur + phb->dma_window_size > SZ_2G) {
> +		udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
> +		panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
> +	}
>   
> +	node = phb->dn;
>   	basep = of_get_property(node, "linux,tce-base", NULL);
>   	sizep = of_get_property(node, "linux,tce-size", NULL);
>   	if (basep == NULL || sizep == NULL) {
> @@ -519,33 +551,25 @@ static void iommu_table_setparms(struct pci_controller *phb,
>   		return;
>   	}
>   
> -	tbl->it_base = (unsigned long)__va(*basep);
> +	_iommu_table_setparms(tbl, phb->bus->number, 0, phb->dma_window_base_cur,
> +			      phb->dma_window_size, IOMMU_PAGE_SHIFT_4K,
> +			      (unsigned long)__va(*basep), &iommu_table_pseries_ops);
>   
>   	if (!is_kdump_kernel())
>   		memset((void *)tbl->it_base, 0, *sizep);
>   
> -	tbl->it_busno = phb->bus->number;
> -	tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
> -
> -	/* Units of tce entries */
> -	tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift;
> -
> -	/* Test if we are going over 2GB of DMA space */
> -	if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) {
> -		udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
> -		panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
> -	}
> -
>   	phb->dma_window_base_cur += phb->dma_window_size;
> -
> -	/* Set the tce table size - measured in entries */
> -	tbl->it_size = phb->dma_window_size >> tbl->it_page_shift;
> -
> -	tbl->it_index = 0;
> -	tbl->it_blocksize = 16;
> -	tbl->it_type = TCE_PCI;
>   }
>   
> +struct iommu_table_ops iommu_table_lpar_multi_ops = {
> +	.set = tce_buildmulti_pSeriesLP,
> +#ifdef CONFIG_IOMMU_API
> +	.xchg_no_kill = tce_exchange_pseries,
> +#endif
> +	.clear = tce_freemulti_pSeriesLP,
> +	.get = tce_get_pSeriesLP
> +};
> +
>   /*
>    * iommu_table_setparms_lpar
>    *
> @@ -557,28 +581,17 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb,
>   				      struct iommu_table_group *table_group,
>   				      const __be32 *dma_window)
>   {
> -	unsigned long offset, size;
> +	unsigned long offset, size, liobn;
>   
> -	of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
> +	of_parse_dma_window(dn, dma_window, &liobn, &offset, &size);
>   
> -	tbl->it_busno = phb->bus->number;
> -	tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
> -	tbl->it_base   = 0;
> -	tbl->it_blocksize  = 16;
> -	tbl->it_type = TCE_PCI;
> -	tbl->it_offset = offset >> tbl->it_page_shift;
> -	tbl->it_size = size >> tbl->it_page_shift;
> +	_iommu_table_setparms(tbl, phb->bus->number, liobn, offset, size, IOMMU_PAGE_SHIFT_4K, 0,
> +			      &iommu_table_lpar_multi_ops);
>   
>   	table_group->tce32_start = offset;
>   	table_group->tce32_size = size;
>   }
>   
> -struct iommu_table_ops iommu_table_pseries_ops = {
> -	.set = tce_build_pSeries,
> -	.clear = tce_free_pSeries,
> -	.get = tce_get_pseries
> -};
> -
>   static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
>   {
>   	struct device_node *dn;
> @@ -647,7 +660,6 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
>   	tbl = pci->table_group->tables[0];
>   
>   	iommu_table_setparms(pci->phb, dn, tbl);
> -	tbl->it_ops = &iommu_table_pseries_ops;
>   	iommu_init_table(tbl, pci->phb->node, 0, 0);
>   
>   	/* Divide the rest (1.75GB) among the children */
> @@ -664,7 +676,7 @@ static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned
>   				bool realmode)
>   {
>   	long rc;
> -	unsigned long ioba = (unsigned long) index << tbl->it_page_shift;
> +	unsigned long ioba = (unsigned long)index << tbl->it_page_shift;


Unrelated change, why, did checkpatch.pl complain?


>   	unsigned long flags, oldtce = 0;
>   	u64 proto_tce = iommu_direction_to_tce_perm(*direction);
>   	unsigned long newtce = *tce | proto_tce;
> @@ -686,15 +698,6 @@ static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned
>   }
>   #endif
>   
> -struct iommu_table_ops iommu_table_lpar_multi_ops = {
> -	.set = tce_buildmulti_pSeriesLP,
> -#ifdef CONFIG_IOMMU_API
> -	.xchg_no_kill = tce_exchange_pseries,
> -#endif
> -	.clear = tce_freemulti_pSeriesLP,
> -	.get = tce_get_pSeriesLP
> -};
> -
>   static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
>   {
>   	struct iommu_table *tbl;
> @@ -729,7 +732,6 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
>   		tbl = ppci->table_group->tables[0];
>   		iommu_table_setparms_lpar(ppci->phb, pdn, tbl,
>   				ppci->table_group, dma_window);
> -		tbl->it_ops = &iommu_table_lpar_multi_ops;
>   		iommu_init_table(tbl, ppci->phb->node, 0, 0);
>   		iommu_register_group(ppci->table_group,
>   				pci_domain_nr(bus), 0);
> @@ -758,7 +760,6 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
>   		PCI_DN(dn)->table_group = iommu_pseries_alloc_group(phb->node);
>   		tbl = PCI_DN(dn)->table_group->tables[0];
>   		iommu_table_setparms(phb, dn, tbl);
> -		tbl->it_ops = &iommu_table_pseries_ops;
>   		iommu_init_table(tbl, phb->node, 0, 0);
>   		set_iommu_table_base(&dev->dev, tbl);
>   		return;
> @@ -1436,7 +1437,6 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
>   		tbl = pci->table_group->tables[0];
>   		iommu_table_setparms_lpar(pci->phb, pdn, tbl,
>   				pci->table_group, dma_window);
> -		tbl->it_ops = &iommu_table_lpar_multi_ops;
>   		iommu_init_table(tbl, pci->phb->node, 0, 0);
>   		iommu_register_group(pci->table_group,
>   				pci_domain_nr(pci->phb->bus), 0);
> 

-- 
Alexey

  reply	other threads:[~2021-05-10  7:35 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30 16:31 [PATCH v4 00/11] DDW + Indirect Mapping Leonardo Bras
2021-04-30 16:31 ` [PATCH v4 01/11] powerpc/pseries/iommu: Replace hard-coded page shift Leonardo Bras
2021-04-30 16:31 ` [PATCH v4 02/11] powerpc/kernel/iommu: Add new iommu_table_in_use() helper Leonardo Bras
2021-05-10  7:34   ` Alexey Kardashevskiy
2021-04-30 16:31 ` [PATCH v4 03/11] powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper Leonardo Bras
2021-04-30 16:31 ` [PATCH v4 04/11] powerpc/pseries/iommu: Add ddw_list_new_entry() helper Leonardo Bras
2021-04-30 16:31 ` [PATCH v4 05/11] powerpc/pseries/iommu: Allow DDW windows starting at 0x00 Leonardo Bras
2021-04-30 16:31 ` [PATCH v4 06/11] powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() Leonardo Bras
2021-05-10  7:34   ` Alexey Kardashevskiy
2021-04-30 16:31 ` [PATCH v4 07/11] powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper Leonardo Bras
2021-05-10  7:34   ` Alexey Kardashevskiy [this message]
2021-06-18 22:26     ` Leonardo Brás
2021-07-13  4:47       ` Leonardo Brás
2021-07-14  8:32         ` Alexey Kardashevskiy
2021-07-14 19:02           ` Leonardo Brás
2021-04-30 16:31 ` [PATCH v4 08/11] powerpc/pseries/iommu: Update remove_dma_window() to accept property name Leonardo Bras
2021-05-11  7:57   ` Alexey Kardashevskiy
2021-04-30 16:31 ` [PATCH v4 09/11] powerpc/pseries/iommu: Find existing DDW with given " Leonardo Bras
2021-05-11  7:57   ` Alexey Kardashevskiy
2021-04-30 16:31 ` [PATCH v4 10/11] powerpc/pseries/iommu: Make use of DDW for indirect mapping Leonardo Bras
2021-05-11  7:57   ` Alexey Kardashevskiy
2021-07-13  4:36     ` Leonardo Brás
2021-07-14  8:38       ` Alexey Kardashevskiy
2021-07-14 19:25         ` Leonardo Brás
2021-04-30 16:31 ` [PATCH v4 11/11] powerpc/pseries/iommu: Rename "direct window" to "dma window" Leonardo Bras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e4984fa0-2afe-a987-4fb8-61b878431b1f@ozlabs.ru \
    --to=aik@ozlabs.ru \
    --cc=benh@kernel.crashing.org \
    --cc=christophe.leroy@c-s.fr \
    --cc=joel@jms.id.au \
    --cc=leobras.c@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=nicoleotsuka@gmail.com \
    --cc=paulus@samba.org \
    --cc=schnelle@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).