LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/3] Introduce Self-Save API for deep stop states
@ 2020-02-12 11:20 Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Pratik Rajesh Sampat @ 2020-02-12 11:20 UTC (permalink / raw)
  To: linux-kernel, linuxppc-dev, mpe, svaidy, ego, linuxram,
	pratik.sampat, psampat, pratik.r.sampat

Skiboot patches v4: https://lists.ozlabs.org/pipermail/skiboot/2020-February/016404.html
v3 patches: https://lkml.org/lkml/2020/1/13/333
Changelog
v3 --> v4
Device tree interface change: Cease to use the active property for
self-save and self-restore and use only presence/absence of the node to 
signify the status.

Currently the stop-API supports a mechanism called as self-restore
which allows us to restore the values of certain SPRs on wakeup from a
deep-stop state to a desired value. To use this, the Kernel makes an
OPAL call passing the PIR of the CPU, the SPR number and the value to
which the SPR should be restored when that CPU wakes up from a deep
stop state.

Recently, a new feature, named self-save has been enabled in the
stop-api, which is an alternative mechanism to do the same, except
that self-save will save the current content of the SPR before
entering a deep stop state and also restore the content back on
waking up from a deep stop state.

This patch series aims at introducing and leveraging the self-save feature in
the kernel.

Now, as the kernel has a choice to prefer one mode over the other and
there can be registers in both the save/restore SPR list which are sent
from the device tree, a new interface has been defined for the seamless
handing of the modes for each SPR.

A list of preferred SPRs are maintained in the kernel which contains two
properties:
1. supported_mode: Helps in identifying if it strictly supports self
                   save or restore or both.
                   Initialized using the information from device tree.
2. preferred_mode: Calls out what mode is preferred for each SPR. It
                   could be strictly self save or restore, or it can also
                   determine the preference of  mode over the other if both
                   are present by encapsulating the other in bitmask from
                   LSB to MSB.
                   Initialized statically.

Below is a table to show the Scenario::Consequence when the self save and
self restore modes are available or disabled in different combinations as
perceived from the device tree thus giving complete backwards compatibly
regardless of an older firmware running a newer kernel or vise-versa.
Support for self save or self-restore is embedded in the device tree,
along with the set of registers it supports.

SR = Self restore; SS = Self save

.-----------------------------------.----------------------------------------.
|             Scenario              |                Consequence             |
:-----------------------------------+----------------------------------------:
| Legacy Firmware. No SS or SR node | Self restore is called for all         |
|                                   | supported SPRs                         |
:-----------------------------------+----------------------------------------:
| SR: !active SS: !active           | Deep stop states disabled              |
:-----------------------------------+----------------------------------------:
| SR: active SS: !active            | Self restore is called for all         |
|                                   | supported SPRs                         |
:-----------------------------------+----------------------------------------:
| SR: active SS: active             | Goes through the preferences for each  |
|                                   | SPR and executes of the modes          |
|                                   | accordingly. Currently, Self restore is|
|                                   | called for all the SPRs except PSSCR   |
|                                   | which is self saved                    |
:-----------------------------------+----------------------------------------:
| SR: active(only HID0) SS: active  | Self save called for all supported     |
|                                   | registers expect HID0 (as HID0 cannot  |
|                                   | be self saved currently)               |
:-----------------------------------+----------------------------------------:
| SR: !active SS: active            | currently will disable deep states as  |
|                                   | HID0 is needed to be self restored and |
|                                   | cannot be self saved                   |
'-----------------------------------'----------------------------------------'

Pratik Rajesh Sampat (3):
  powerpc/powernv: Interface to define support and preference for a SPR
  powerpc/powernv: Introduce Self save support
  powerpc/powernv: Parse device tree, population of SPR support

 arch/powerpc/include/asm/opal-api.h        |   3 +-
 arch/powerpc/include/asm/opal.h            |   1 +
 arch/powerpc/platforms/powernv/idle.c      | 420 ++++++++++++++++++---
 arch/powerpc/platforms/powernv/opal-call.c |   1 +
 4 files changed, 367 insertions(+), 58 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v4 1/3] powerpc/powernv: Interface to define support and preference for a SPR
  2020-02-12 11:20 [PATCH v4 0/3] Introduce Self-Save API for deep stop states Pratik Rajesh Sampat
@ 2020-02-12 11:20 ` Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 2/3] powerpc/powernv: Introduce Self save support Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 3/3] powerpc/powernv: Parse device tree, population of SPR support Pratik Rajesh Sampat
  2 siblings, 0 replies; 4+ messages in thread
From: Pratik Rajesh Sampat @ 2020-02-12 11:20 UTC (permalink / raw)
  To: linux-kernel, linuxppc-dev, mpe, svaidy, ego, linuxram,
	pratik.sampat, psampat, pratik.r.sampat

Define a bitmask interface to determine support for the Self Restore,
Self Save or both.

Also define an interface to determine the preference of that SPR to
be strictly saved or restored or encapsulated with an order of preference.

The preference bitmask is shown as below:
----------------------------
|... | 2nd pref | 1st pref |
----------------------------
MSB			  LSB

The preference from higher to lower is from LSB to MSB with a shift of 8
bits.
Example:
Prefer self save first, if not available then prefer self
restore
The preference mask for this scenario will be seen as below.
((SELF_RESTORE_STRICT << PREFERENCE_SHIFT) | SELF_SAVE_STRICT)
---------------------------------
|... | Self restore | Self save |
---------------------------------
MSB			        LSB

Finally, declare a list of preferred SPRs which encapsulate the bitmaks
for preferred and supported with defaults of both being set to support
legacy firmware.

This commit also implements using the above interface and retains the
legacy functionality of self restore.

Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/platforms/powernv/idle.c | 316 +++++++++++++++++++++-----
 1 file changed, 259 insertions(+), 57 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 78599bca66c2..03fe835aadd1 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -32,9 +32,112 @@
 #define P9_STOP_SPR_MSR 2000
 #define P9_STOP_SPR_PSSCR      855
 
+/* Interface for the stop state supported and preference */
+#define SELF_RESTORE_TYPE    0
+#define SELF_SAVE_TYPE       1
+
+#define NR_PREFERENCES    2
+#define PREFERENCE_SHIFT  4
+#define PREFERENCE_MASK   0xf
+
+#define UNSUPPORTED         0x0
+#define SELF_RESTORE_STRICT 0x1
+#define SELF_SAVE_STRICT    0x2
+
+/*
+ * Bitmask defining the kind of preferences available.
+ * Note : The higher to lower preference is from LSB to MSB, with a shift of
+ * 4 bits.
+ * ----------------------------
+ * |    | 2nd pref | 1st pref |
+ * ----------------------------
+ * MSB			      LSB
+ */
+/* Prefer Restore if available, otherwise unsupported */
+#define PREFER_SELF_RESTORE_ONLY	SELF_RESTORE_STRICT
+/* Prefer Save if available, otherwise unsupported */
+#define PREFER_SELF_SAVE_ONLY		SELF_SAVE_STRICT
+/* Prefer Restore when available, otherwise prefer Save */
+#define PREFER_RESTORE_SAVE		((SELF_SAVE_STRICT << \
+					  PREFERENCE_SHIFT)\
+					  | SELF_RESTORE_STRICT)
+/* Prefer Save when available, otherwise prefer Restore*/
+#define PREFER_SAVE_RESTORE		((SELF_RESTORE_STRICT <<\
+					  PREFERENCE_SHIFT)\
+					  | SELF_SAVE_STRICT)
 static u32 supported_cpuidle_states;
 struct pnv_idle_states_t *pnv_idle_states;
 int nr_pnv_idle_states;
+/* Caching the lpcr & ptcr support to use later */
+static bool is_lpcr_self_save;
+static bool is_ptcr_self_save;
+
+struct preferred_sprs {
+	u64 spr;
+	u32 preferred_mode;
+	u32 supported_mode;
+};
+
+/*
+ * Preferred mode: Order of precedence when both self-save and self-restore
+ *		   supported
+ * Supported mode: Default support. Can be overwritten during system
+ *		   initialization
+ */
+struct preferred_sprs preferred_sprs[] = {
+	{
+		.spr = SPRN_HSPRG0,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_LPCR,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_PTCR,
+		.preferred_mode = PREFER_SAVE_RESTORE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_HMEER,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_HID0,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = P9_STOP_SPR_MSR,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = P9_STOP_SPR_PSSCR,
+		.preferred_mode = PREFER_SAVE_RESTORE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_HID1,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_HID4,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	},
+	{
+		.spr = SPRN_HID5,
+		.preferred_mode = PREFER_RESTORE_SAVE,
+		.supported_mode = SELF_RESTORE_STRICT,
+	}
+};
+
+const int nr_preferred_sprs = ARRAY_SIZE(preferred_sprs);
 
 /*
  * The default stop state that will be used by ppc_md.power_save
@@ -61,78 +164,170 @@ static bool deepest_stop_found;
 
 static unsigned long power7_offline_type;
 
-static int pnv_save_sprs_for_deep_states(void)
+static int pnv_self_restore_sprs(u64 pir, int cpu, u64 spr)
 {
-	int cpu;
+	u64 reg_val;
 	int rc;
 
-	/*
-	 * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across
-	 * all cpus at boot. Get these reg values of current cpu and use the
-	 * same across all cpus.
-	 */
-	uint64_t lpcr_val	= mfspr(SPRN_LPCR);
-	uint64_t hid0_val	= mfspr(SPRN_HID0);
-	uint64_t hid1_val	= mfspr(SPRN_HID1);
-	uint64_t hid4_val	= mfspr(SPRN_HID4);
-	uint64_t hid5_val	= mfspr(SPRN_HID5);
-	uint64_t hmeer_val	= mfspr(SPRN_HMEER);
-	uint64_t msr_val = MSR_IDLE;
-	uint64_t psscr_val = pnv_deepest_stop_psscr_val;
-
-	for_each_present_cpu(cpu) {
-		uint64_t pir = get_hard_smp_processor_id(cpu);
-		uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu];
-
-		rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
+	switch (spr) {
+	case SPRN_HSPRG0:
+		reg_val = (uint64_t)paca_ptrs[cpu];
+		rc = opal_slw_set_reg(pir, SPRN_HSPRG0, reg_val);
 		if (rc != 0)
 			return rc;
-
-		rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
+		break;
+	case SPRN_LPCR:
+		reg_val = mfspr(SPRN_LPCR);
+		rc = opal_slw_set_reg(pir, SPRN_LPCR, reg_val);
 		if (rc != 0)
 			return rc;
-
+		break;
+	case P9_STOP_SPR_MSR:
+		reg_val = MSR_IDLE;
 		if (cpu_has_feature(CPU_FTR_ARCH_300)) {
-			rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val);
+			rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, reg_val);
 			if (rc)
 				return rc;
-
-			rc = opal_slw_set_reg(pir,
-					      P9_STOP_SPR_PSSCR, psscr_val);
-
+		}
+		break;
+	case P9_STOP_SPR_PSSCR:
+		reg_val = pnv_deepest_stop_psscr_val;
+		if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+			rc = opal_slw_set_reg(pir, P9_STOP_SPR_PSSCR, reg_val);
 			if (rc)
 				return rc;
 		}
-
-		/* HIDs are per core registers */
+		break;
+	case SPRN_HMEER:
+		reg_val = mfspr(SPRN_HMEER);
 		if (cpu_thread_in_core(cpu) == 0) {
-
-			rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
-			if (rc != 0)
+			rc = opal_slw_set_reg(pir, SPRN_HMEER, reg_val);
+			if (rc)
 				return rc;
-
-			rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
-			if (rc != 0)
+		}
+		break;
+	case SPRN_HID0:
+		reg_val = mfspr(SPRN_HID0);
+		if (cpu_thread_in_core(cpu) == 0) {
+			rc = opal_slw_set_reg(pir, SPRN_HID0, reg_val);
+			if (rc)
 				return rc;
+		}
+		break;
+	case SPRN_HID1:
+		reg_val = mfspr(SPRN_HID1);
+		if (cpu_thread_in_core(cpu) == 0 &&
+		    !cpu_has_feature(CPU_FTR_ARCH_300)) {
+			rc = opal_slw_set_reg(pir, SPRN_HID1, reg_val);
+			if (rc)
+				return rc;
+		}
+		break;
+	case SPRN_HID4:
+		reg_val = mfspr(SPRN_HID4);
+		if (cpu_thread_in_core(cpu) == 0 &&
+		    !cpu_has_feature(CPU_FTR_ARCH_300)) {
+			rc = opal_slw_set_reg(pir, SPRN_HID4, reg_val);
+			if (rc)
+				return rc;
+		}
+		break;
+	case SPRN_HID5:
+		reg_val = mfspr(SPRN_HID5);
+		if (cpu_thread_in_core(cpu) == 0 &&
+		    !cpu_has_feature(CPU_FTR_ARCH_300)) {
+			rc = opal_slw_set_reg(pir, SPRN_HID5, reg_val);
+			if (rc)
+				return rc;
+		}
+		break;
+	case SPRN_PTCR:
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
 
-			/* Only p8 needs to set extra HID regiters */
-			if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
-
-				rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
-				if (rc != 0)
-					return rc;
-
-				rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
-				if (rc != 0)
-					return rc;
-
-				rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
-				if (rc != 0)
-					return rc;
+static int pnv_self_save_restore_sprs(void)
+{
+	int rc, index, cpu, k;
+	u64 pir;
+	struct preferred_sprs curr_spr;
+	bool is_initialized;
+	u32 preferred;
+
+	is_lpcr_self_save = false;
+	is_ptcr_self_save = false;
+	for_each_present_cpu(cpu) {
+		pir = get_hard_smp_processor_id(cpu);
+		for (index = 0; index < nr_preferred_sprs; index++) {
+			curr_spr = preferred_sprs[index];
+			is_initialized = false;
+			/*
+			 * Go through each of the preferences
+			 * Check if it is preferred as well as supported
+			 */
+			for (k = 0; k < NR_PREFERENCES; k++) {
+				preferred = curr_spr.preferred_mode
+						& PREFERENCE_MASK;
+				if (preferred & curr_spr.supported_mode
+				    & SELF_RESTORE_STRICT) {
+					is_initialized = true;
+					rc = pnv_self_restore_sprs(pir, cpu,
+								curr_spr.spr);
+					if (rc != 0)
+						return rc;
+					break;
+				}
+				preferred_sprs[index].preferred_mode =
+					preferred_sprs[index].preferred_mode >>
+					PREFERENCE_SHIFT;
+				curr_spr = preferred_sprs[index];
+			}
+			if (!is_initialized) {
+				if (preferred_sprs[index].spr == SPRN_PTCR ||
+				    (cpu_has_feature(CPU_FTR_ARCH_300) &&
+				    (preferred_sprs[index].spr == SPRN_HID1 ||
+				     preferred_sprs[index].spr == SPRN_HID4 ||
+				     preferred_sprs[index].spr == SPRN_HID5)))
+					continue;
+				return OPAL_UNSUPPORTED;
 			}
 		}
 	}
+	return 0;
+}
 
+static int pnv_save_sprs_for_deep_states(void)
+{
+	int rc;
+	int index;
+
+	/*
+	 * Iterate over the preffered SPRs and if even one of them is
+	 * still unsupported We cut support for deep stop states
+	 */
+	for (index = 0; index < nr_preferred_sprs; index++) {
+		if (preferred_sprs[index].supported_mode == UNSUPPORTED) {
+			if (preferred_sprs[index].spr == SPRN_PTCR ||
+			    (cpu_has_feature(CPU_FTR_ARCH_300) &&
+			    (preferred_sprs[index].spr == SPRN_HID1 ||
+			     preferred_sprs[index].spr == SPRN_HID4 ||
+			     preferred_sprs[index].spr == SPRN_HID5)))
+				continue;
+			return OPAL_UNSUPPORTED;
+		}
+	}
+	/*
+	 * Try to self-restore the registers that can be self restored if self
+	 * restore is active, try the same for the registers that
+	 * can be self saved too.
+	 * Note : If both are supported, self restore is given more priority
+	 */
+	rc = pnv_self_save_restore_sprs();
+	if (rc != 0)
+		return rc;
 	return 0;
 }
 
@@ -658,7 +853,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 		mmcr0		= mfspr(SPRN_MMCR0);
 	}
 	if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
-		sprs.lpcr	= mfspr(SPRN_LPCR);
+		if (!is_lpcr_self_save)
+			sprs.lpcr	= mfspr(SPRN_LPCR);
 		sprs.hfscr	= mfspr(SPRN_HFSCR);
 		sprs.fscr	= mfspr(SPRN_FSCR);
 		sprs.pid	= mfspr(SPRN_PID);
@@ -672,7 +868,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 		sprs.mmcr1	= mfspr(SPRN_MMCR1);
 		sprs.mmcr2	= mfspr(SPRN_MMCR2);
 
-		sprs.ptcr	= mfspr(SPRN_PTCR);
+		if (!is_ptcr_self_save)
+			sprs.ptcr	= mfspr(SPRN_PTCR);
 		sprs.rpr	= mfspr(SPRN_RPR);
 		sprs.tscr	= mfspr(SPRN_TSCR);
 		if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
@@ -756,7 +953,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 		goto core_woken;
 
 	/* Per-core SPRs */
-	mtspr(SPRN_PTCR,	sprs.ptcr);
+	if (!is_ptcr_self_save)
+		mtspr(SPRN_PTCR,	sprs.ptcr);
 	mtspr(SPRN_RPR,		sprs.rpr);
 	mtspr(SPRN_TSCR,	sprs.tscr);
 
@@ -777,7 +975,8 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 	atomic_unlock_and_stop_thread_idle();
 
 	/* Per-thread SPRs */
-	mtspr(SPRN_LPCR,	sprs.lpcr);
+	if (!is_lpcr_self_save)
+		mtspr(SPRN_LPCR,	sprs.lpcr);
 	mtspr(SPRN_HFSCR,	sprs.hfscr);
 	mtspr(SPRN_FSCR,	sprs.fscr);
 	mtspr(SPRN_PID,		sprs.pid);
@@ -956,8 +1155,11 @@ void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
 	 * Program the LPCR via stop-api only if the deepest stop state
 	 * can lose hypervisor context.
 	 */
-	if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
-		opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
+	if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
+		if (!is_lpcr_self_save)
+			opal_slw_set_reg(pir, SPRN_LPCR,
+					 lpcr_val);
+	}
 }
 
 /*
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v4 2/3] powerpc/powernv: Introduce Self save support
  2020-02-12 11:20 [PATCH v4 0/3] Introduce Self-Save API for deep stop states Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
@ 2020-02-12 11:20 ` Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 3/3] powerpc/powernv: Parse device tree, population of SPR support Pratik Rajesh Sampat
  2 siblings, 0 replies; 4+ messages in thread
From: Pratik Rajesh Sampat @ 2020-02-12 11:20 UTC (permalink / raw)
  To: linux-kernel, linuxppc-dev, mpe, svaidy, ego, linuxram,
	pratik.sampat, psampat, pratik.r.sampat

This commit introduces and leverages the Self save API which OPAL now
supports.

Add the new Self Save OPAL API call in the list of OPAL calls.
Implement the self saving of the SPRs based on the support populated
while respecting it's preferences.

This implementation allows mixing of support for the SPRs, which
means that a SPR can be self restored while another SPR be self saved if
they support and prefer it to be so.

Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/include/asm/opal-api.h        |  3 ++-
 arch/powerpc/include/asm/opal.h            |  1 +
 arch/powerpc/platforms/powernv/idle.c      | 22 ++++++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-call.c |  1 +
 4 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index c1f25a760eb1..1b6e1a68d431 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -214,7 +214,8 @@
 #define OPAL_SECVAR_GET				176
 #define OPAL_SECVAR_GET_NEXT			177
 #define OPAL_SECVAR_ENQUEUE_UPDATE		178
-#define OPAL_LAST				178
+#define OPAL_SLW_SELF_SAVE_REG			181
+#define OPAL_LAST				181
 
 #define QUIESCE_HOLD			1 /* Spin all calls at entry */
 #define QUIESCE_REJECT			2 /* Fail all calls with OPAL_BUSY */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9986ac34b8e2..389a85b63805 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -203,6 +203,7 @@ int64_t opal_handle_hmi(void);
 int64_t opal_handle_hmi2(__be64 *out_flags);
 int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
 int64_t opal_unregister_dump_region(uint32_t id);
+int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
 int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
 int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
 int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 03fe835aadd1..97aeb45e897b 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -279,6 +279,26 @@ static int pnv_self_save_restore_sprs(void)
 					if (rc != 0)
 						return rc;
 					break;
+				} else if (preferred & curr_spr.supported_mode
+					   & SELF_SAVE_STRICT) {
+					is_initialized = true;
+					if (curr_spr.spr == SPRN_HMEER &&
+					    cpu_thread_in_core(cpu) != 0) {
+						continue;
+					}
+					rc = opal_slw_self_save_reg(pir,
+								curr_spr.spr);
+					if (rc != 0)
+						return rc;
+					switch (curr_spr.spr) {
+					case SPRN_LPCR:
+						is_lpcr_self_save = true;
+						break;
+					case SPRN_PTCR:
+						is_ptcr_self_save = true;
+						break;
+					}
+					break;
 				}
 				preferred_sprs[index].preferred_mode =
 					preferred_sprs[index].preferred_mode >>
@@ -1159,6 +1179,8 @@ void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
 		if (!is_lpcr_self_save)
 			opal_slw_set_reg(pir, SPRN_LPCR,
 					 lpcr_val);
+		else
+			opal_slw_self_save_reg(pir, SPRN_LPCR);
 	}
 }
 
diff --git a/arch/powerpc/platforms/powernv/opal-call.c b/arch/powerpc/platforms/powernv/opal-call.c
index 5cd0f52d258f..11e0ceb90de0 100644
--- a/arch/powerpc/platforms/powernv/opal-call.c
+++ b/arch/powerpc/platforms/powernv/opal-call.c
@@ -223,6 +223,7 @@ OPAL_CALL(opal_handle_hmi,			OPAL_HANDLE_HMI);
 OPAL_CALL(opal_handle_hmi2,			OPAL_HANDLE_HMI2);
 OPAL_CALL(opal_config_cpu_idle_state,		OPAL_CONFIG_CPU_IDLE_STATE);
 OPAL_CALL(opal_slw_set_reg,			OPAL_SLW_SET_REG);
+OPAL_CALL(opal_slw_self_save_reg,		OPAL_SLW_SELF_SAVE_REG);
 OPAL_CALL(opal_register_dump_region,		OPAL_REGISTER_DUMP_REGION);
 OPAL_CALL(opal_unregister_dump_region,		OPAL_UNREGISTER_DUMP_REGION);
 OPAL_CALL(opal_pci_set_phb_cxl_mode,		OPAL_PCI_SET_PHB_CAPI_MODE);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v4 3/3] powerpc/powernv: Parse device tree, population of SPR support
  2020-02-12 11:20 [PATCH v4 0/3] Introduce Self-Save API for deep stop states Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
  2020-02-12 11:20 ` [PATCH v4 2/3] powerpc/powernv: Introduce Self save support Pratik Rajesh Sampat
@ 2020-02-12 11:20 ` Pratik Rajesh Sampat
  2 siblings, 0 replies; 4+ messages in thread
From: Pratik Rajesh Sampat @ 2020-02-12 11:20 UTC (permalink / raw)
  To: linux-kernel, linuxppc-dev, mpe, svaidy, ego, linuxram,
	pratik.sampat, psampat, pratik.r.sampat

Parse the device tree for nodes self-save, self-restore and populate
support for the preferred SPRs based what was advertised by the device
tree.

Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/platforms/powernv/idle.c | 82 +++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 97aeb45e897b..27dfadf609e8 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -1436,6 +1436,85 @@ static void __init pnv_probe_idle_states(void)
 		supported_cpuidle_states |= pnv_idle_states[i].flags;
 }
 
+/*
+ * Extracts and populates the self save or restore capabilities
+ * passed from the device tree node
+ */
+static int extract_save_restore_state_dt(struct device_node *np, int type)
+{
+	int nr_sprns = 0, i, bitmask_index;
+	int rc = 0;
+	u64 *temp_u64;
+	u64 bit_pos;
+
+	nr_sprns = of_property_count_u64_elems(np, "sprn-bitmask");
+	if (nr_sprns <= 0)
+		return rc;
+	temp_u64 = kcalloc(nr_sprns, sizeof(u64), GFP_KERNEL);
+	if (of_property_read_u64_array(np, "sprn-bitmask",
+				       temp_u64, nr_sprns)) {
+		pr_warn("cpuidle-powernv: failed to find registers in DT\n");
+		kfree(temp_u64);
+		return -EINVAL;
+	}
+	/*
+	 * Populate acknowledgment of support for the sprs in the global vector
+	 * gotten by the registers supplied by the firmware.
+	 * The registers are in a bitmask, bit index within
+	 * that specifies the SPR
+	 */
+	for (i = 0; i < nr_preferred_sprs; i++) {
+		bitmask_index = preferred_sprs[i].spr / 64;
+		bit_pos = preferred_sprs[i].spr % 64;
+		if ((temp_u64[bitmask_index] & (1UL << bit_pos)) == 0) {
+			if (type == SELF_RESTORE_TYPE)
+				preferred_sprs[i].supported_mode &=
+					~SELF_RESTORE_STRICT;
+			else
+				preferred_sprs[i].supported_mode &=
+					~SELF_SAVE_STRICT;
+			continue;
+		}
+		if (type == SELF_RESTORE_TYPE) {
+			preferred_sprs[i].supported_mode |=
+				SELF_RESTORE_STRICT;
+		} else {
+			preferred_sprs[i].supported_mode |=
+				SELF_SAVE_STRICT;
+		}
+	}
+
+	kfree(temp_u64);
+	return rc;
+}
+
+static int pnv_parse_deepstate_dt(void)
+{
+	struct device_node *sr_np, *ss_np;
+	int rc = 0, i;
+
+	/* Self restore register population */
+	sr_np = of_find_node_by_path("/ibm,opal/power-mgt/self-restore");
+	if (!sr_np) {
+		pr_warn("opal: self restore Node not found");
+	} else {
+		rc = extract_save_restore_state_dt(sr_np, SELF_RESTORE_TYPE);
+		if (rc != 0)
+			return rc;
+	}
+	/* Self save register population */
+	ss_np = of_find_node_by_path("/ibm,opal/power-mgt/self-save");
+	if (!ss_np) {
+		pr_warn("opal: self save Node not found");
+		pr_warn("Legacy firmware. Assuming default self-restore support");
+		for (i = 0; i < nr_preferred_sprs; i++)
+			preferred_sprs[i].supported_mode &= ~SELF_SAVE_STRICT;
+	} else {
+		rc = extract_save_restore_state_dt(ss_np, SELF_SAVE_TYPE);
+	}
+	return rc;
+}
+
 /*
  * This function parses device-tree and populates all the information
  * into pnv_idle_states structure. It also sets up nr_pnv_idle_states
@@ -1584,6 +1663,9 @@ static int __init pnv_init_idle_states(void)
 		return rc;
 	pnv_probe_idle_states();
 
+	rc = pnv_parse_deepstate_dt();
+	if (rc)
+		return rc;
 	if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
 		if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
 			power7_fastsleep_workaround_entry = false;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-12 11:20 [PATCH v4 0/3] Introduce Self-Save API for deep stop states Pratik Rajesh Sampat
2020-02-12 11:20 ` [PATCH v4 1/3] powerpc/powernv: Interface to define support and preference for a SPR Pratik Rajesh Sampat
2020-02-12 11:20 ` [PATCH v4 2/3] powerpc/powernv: Introduce Self save support Pratik Rajesh Sampat
2020-02-12 11:20 ` [PATCH v4 3/3] powerpc/powernv: Parse device tree, population of SPR support Pratik Rajesh Sampat

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git