* [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in do_page_fault
@ 2023-05-09 21:03 syzbot
2023-05-10 9:20 ` Aleksandr Nogikh
0 siblings, 1 reply; 3+ messages in thread
From: syzbot @ 2023-05-09 21:03 UTC (permalink / raw)
To: brgl, linus.walleij, linux-gpio, linux-kernel, syzkaller-bugs
Hello,
syzbot found the following issue on:
HEAD commit: ba0ad6ed89fd media: nxp: imx8-isi: fix buiding on 32-bit
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=15c3d40c280000
kernel config: https://syzkaller.appspot.com/x/.config?x=cc86fee67199911d
dashboard link: https://syzkaller.appspot.com/bug?extid=49207572d7fa5be562a0
compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
userspace arch: arm
Downloadable assets:
disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/c35b5b2731d2/non_bootable_disk-ba0ad6ed.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/590de311efa7/vmlinux-ba0ad6ed.xz
kernel image: https://storage.googleapis.com/syzbot-assets/7007b545886c/zImage-ba0ad6ed.xz
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+49207572d7fa5be562a0@syzkaller.appspotmail.com
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x00000000ffffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 520868
allocated 2097152 bytes of page_ext
mem auto-init: stack:off, heap alloc:on, heap free:off
software IO TLB: area num 2.
software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
Memory: 1952316K/2097152K available (24576K kernel code, 2364K rwdata, 8404K rodata, 2048K init, 868K bss, 128452K reserved, 16384K cma-reserved, 524288K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
rcu: RCU callback double-/use-after-free debug is enabled.
All grace periods are expedited (rcu_expedited).
Trampoline variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
GIC physical location is 0x2c001000
rcu: srcu_init: Setting srcu_struct sizes based on contention.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
arch_timer: cp15 timer(s) running at 62.50MHz (virt).
clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
Switching to timer-based delay loop, resolution 16ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
TOMOYO Linux initialized
SELinux: Initializing.
LSM support for eBPF active
stackdepot: allocating hash table of 131072 entries via kvcalloc
Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: Spectre BHB: enabling loop workaround for all CPUs
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000041 when read
[00000041] *pgd=80000080004003, *pmd=00000000
Internal error: Oops: 206 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc1-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at do_page_fault+0x14/0x3b8 arch/arm/mm/fault.c:276
LR is at gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030
pc : [<802160d8>] lr : [<808906c4>] psr: 40000113
sp : 82601e08 ip : 82601e50 fp : 82601e4c
r10: 00000000 r9 : 827e1666 r8 : 00000001
r7 : 8261ae40 r6 : 00000001 r5 : 8404f4a8 r4 : 00000002
r3 : 802160c4 r2 : 00000001 r1 : 00000002 r0 : 831c0640
Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5387d Table: 80003000 DAC: fffffffd
Register r0 information: slab kmalloc-512 start 831c0600 pointer offset 64 size 512
Register r1 information: non-paged memory
Register r2 information: non-paged memory
Register r3 information: non-slab/vmalloc memory
Register r4 information: non-paged memory
Register r5 information: slab kmalloc-192 start 8404f480 pointer offset 40 size 192
Register r6 information: non-paged memory
Register r7 information: non-slab/vmalloc memory
Register r8 information: non-paged memory
Register r9 information: non-slab/vmalloc memory
Register r10 information: NULL pointer
Register r11 information: non-slab/vmalloc memory
Register r12 information: non-slab/vmalloc memory
Process swapper/0 (pid: 0, stack limit = 0x82600000)
Stack: (0x82601e08 to 0x82602000)
1e00: 80201410 80298db8 817f6f00 817f6de8 04200002 82604d40
1e20: ffff8d67 00000002 8404f4a8 00000001 831c0640 00000001 827e1666 00000000
1e40: 82601e7c 82601e50 808906c4 802160d0 00000003 8404f4a8 00000001 000000ff
1e60: dddd1798 00000001 827e1666 00000000 82601e8c 82601e80 80890d54 80890684
1e80: 82601ea4 82601e90 80891ae8 80890d0c 8326c9dc 000000ff 82601ebc 82601ea8
1ea0: 8107f920 80891aa4 8326c9dc 000000ff 82601ecc 82601ec0 8107dd50 8107f8d0
1ec0: 82601ee4 82601ed0 8107e09c 8107dd24 8326c9dc 84655294 82601f04 82601ee8
1ee0: 8107ef38 8107e044 000001fd 8290cee4 00000002 dddd1798 82601f2c 82601f08
1f00: 81080300 8107ef0c 00000000 8260c498 8261ae40 8260c4e0 00000000 827e1666
1f20: 82601f3c 82601f30 80208efc 8108025c 82601f84 82601f40 80293570 80208ef4
1f40: 8260c440 00000000 81f86214 824af2f8 817f6f00 cbc96766 82601f84 000000ea
1f60: 82625c7c 8260c440 00000000 8261a934 8260c440 82850000 82601f94 82601f88
1f80: 80293b00 80293500 82601fa4 82601f98 817f7c74 80293aec 82601fb4 82601fa8
1fa0: 82400bb8 817f7ba4 82601ff4 82601fb8 824012f8 82400bb4 00000000 00000000
1fc0: 00000000 00000000 ffffffff 00000000 00000000 820ad698 82484a70 00000000
1fe0: 00000000 000008e0 00000000 82601ff8 00000000 82400c24 00000000 00000000
Backtrace:
[<802160c4>] (do_page_fault) from [<808906c4>] (gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030)
r10:00000000 r9:827e1666 r8:00000001 r7:831c0640 r6:00000001 r5:8404f4a8
r4:00000002
[<80890678>] (gpiod_set_raw_value_commit) from [<80890d54>] (gpiod_set_value_nocheck+0x54/0x58 drivers/gpio/gpiolib.c:3204)
r10:00000000 r9:827e1666 r8:00000001 r7:dddd1798 r6:000000ff r5:00000001
r4:8404f4a8 r3:00000003
[<80890d00>] (gpiod_set_value_nocheck) from [<80891ae8>] (gpiod_set_value+0x50/0xc0 drivers/gpio/gpiolib.c:3223)
[<80891a98>] (gpiod_set_value) from [<8107f920>] (gpio_led_set+0x5c/0x60 drivers/leds/leds-gpio.c:54)
r5:000000ff r4:8326c9dc
[<8107f8c4>] (gpio_led_set) from [<8107dd50>] (__led_set_brightness drivers/leds/led-core.c:47 [inline])
[<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nopm drivers/leds/led-core.c:271 [inline])
[<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nosleep+0x38/0x5c drivers/leds/led-core.c:287)
r5:000000ff r4:8326c9dc
[<8107dd18>] (led_set_brightness_nosleep) from [<8107e09c>] (led_set_brightness+0x64/0x68 drivers/leds/led-core.c:264)
[<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event drivers/leds/led-triggers.c:390 [inline])
[<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event+0x38/0x50 drivers/leds/led-triggers.c:380)
r5:84655294 r4:8326c9dc
[<8107ef00>] (led_trigger_event) from [<81080300>] (ledtrig_cpu+0xb0/0x100 drivers/leds/trigger/ledtrig-cpu.c:86)
r7:dddd1798 r6:00000002 r5:8290cee4 r4:000001fd
[<81080250>] (ledtrig_cpu) from [<80208efc>] (arch_cpu_idle_exit+0x14/0x18 arch/arm/kernel/process.c:98)
r9:827e1666 r8:00000000 r7:8260c4e0 r6:8261ae40 r5:8260c498 r4:00000000
[<80208ee8>] (arch_cpu_idle_exit) from [<80293570>] (do_idle+0x7c/0x2f0 kernel/sched/idle.c:284)
[<802934f4>] (do_idle) from [<80293b00>] (cpu_startup_entry+0x20/0x24 kernel/sched/idle.c:379)
r10:82850000 r9:8260c440 r8:8261a934 r7:00000000 r6:8260c440 r5:82625c7c
r4:000000ea
[<80293ae0>] (cpu_startup_entry) from [<817f7c74>] (rest_init+0xdc/0xe0 init/main.c:735)
[<817f7b98>] (rest_init) from [<82400bb8>] (arch_post_acpi_subsys_init+0x0/0x20 init/main.c:834)
[<82400ba8>] (arch_call_rest_init) from [<824012f8>] (start_kernel+0x6e0/0x70c init/main.c:1088)
[<82400c18>] (start_kernel) from [<00000000>] (0x0)
Code: e92ddff0 e24cb004 e24dd01c ee1d7f70 (e5923040)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
0: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
4: e24cb004 sub fp, ip, #4
8: e24dd01c sub sp, sp, #28
c: ee1d7f70 mrc 15, 0, r7, cr13, cr0, {3}
* 10: e5923040 ldr r3, [r2, #64] ; 0x40 <-- trapping instruction
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
If the bug is already fixed, let syzbot know by replying with:
#syz fix: exact-commit-title
If you want to change bug's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)
If the bug is a duplicate of another bug, reply with:
#syz dup: exact-subject-of-another-report
If you want to undo deduplication, reply with:
#syz undup
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in do_page_fault
2023-05-09 21:03 [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in do_page_fault syzbot
@ 2023-05-10 9:20 ` Aleksandr Nogikh
2023-05-10 9:20 ` syzbot
0 siblings, 1 reply; 3+ messages in thread
From: Aleksandr Nogikh @ 2023-05-10 9:20 UTC (permalink / raw)
To: syzbot; +Cc: brgl, linus.walleij, linux-gpio, linux-kernel, syzkaller-bugs
FWIW this is a yet another manifestation of
https://lore.kernel.org/all/CANp29Y4Q-VWEWeHmZu0f9tLLik1Va8oDF-s8hAeVkBZbX4K0gg@mail.gmail.com/
#syz dup: upstream boot error: BUG: unable to handle kernel NULL
pointer dereference in load_balance
On Tue, May 9, 2023 at 11:04 PM syzbot
<syzbot+49207572d7fa5be562a0@syzkaller.appspotmail.com> wrote:
>
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit: ba0ad6ed89fd media: nxp: imx8-isi: fix buiding on 32-bit
> git tree: upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=15c3d40c280000
> kernel config: https://syzkaller.appspot.com/x/.config?x=cc86fee67199911d
> dashboard link: https://syzkaller.appspot.com/bug?extid=49207572d7fa5be562a0
> compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
> userspace arch: arm
>
> Downloadable assets:
> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/c35b5b2731d2/non_bootable_disk-ba0ad6ed.raw.xz
> vmlinux: https://storage.googleapis.com/syzbot-assets/590de311efa7/vmlinux-ba0ad6ed.xz
> kernel image: https://storage.googleapis.com/syzbot-assets/7007b545886c/zImage-ba0ad6ed.xz
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+49207572d7fa5be562a0@syzkaller.appspotmail.com
>
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000080000000-0x00000000ffffffff]
> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
> Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> Built 1 zonelists, mobility grouping on. Total pages: 520868
> allocated 2097152 bytes of page_ext
> mem auto-init: stack:off, heap alloc:on, heap free:off
> software IO TLB: area num 2.
> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
> Memory: 1952316K/2097152K available (24576K kernel code, 2364K rwdata, 8404K rodata, 2048K init, 868K bss, 128452K reserved, 16384K cma-reserved, 524288K highmem)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> trace event string verifier disabled
> rcu: Preemptible hierarchical RCU implementation.
> rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> rcu: RCU callback double-/use-after-free debug is enabled.
> All grace periods are expedited (rcu_expedited).
> Trampoline variant of Tasks RCU enabled.
> Tracing variant of Tasks RCU enabled.
> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> GIC physical location is 0x2c001000
> rcu: srcu_init: Setting srcu_struct sizes based on contention.
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
> Switching to timer-based delay loop, resolution 16ns
> Console: colour dummy device 80x30
> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
> pid_max: default: 32768 minimum: 301
> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
> landlock: Up and running.
> Yama: becoming mindful.
> TOMOYO Linux initialized
> SELinux: Initializing.
> LSM support for eBPF active
> stackdepot: allocating hash table of 131072 entries via kvcalloc
> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> CPU: Testing write buffer coherency: ok
> CPU0: Spectre BHB: enabling loop workaround for all CPUs
> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> 8<--- cut here ---
> Unable to handle kernel NULL pointer dereference at virtual address 00000041 when read
> [00000041] *pgd=80000080004003, *pmd=00000000
> Internal error: Oops: 206 [#1] PREEMPT SMP ARM
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc1-syzkaller #0
> Hardware name: ARM-Versatile Express
> PC is at do_page_fault+0x14/0x3b8 arch/arm/mm/fault.c:276
> LR is at gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030
> pc : [<802160d8>] lr : [<808906c4>] psr: 40000113
> sp : 82601e08 ip : 82601e50 fp : 82601e4c
> r10: 00000000 r9 : 827e1666 r8 : 00000001
> r7 : 8261ae40 r6 : 00000001 r5 : 8404f4a8 r4 : 00000002
> r3 : 802160c4 r2 : 00000001 r1 : 00000002 r0 : 831c0640
> Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
> Control: 30c5387d Table: 80003000 DAC: fffffffd
> Register r0 information: slab kmalloc-512 start 831c0600 pointer offset 64 size 512
> Register r1 information: non-paged memory
> Register r2 information: non-paged memory
> Register r3 information: non-slab/vmalloc memory
> Register r4 information: non-paged memory
> Register r5 information: slab kmalloc-192 start 8404f480 pointer offset 40 size 192
> Register r6 information: non-paged memory
> Register r7 information: non-slab/vmalloc memory
> Register r8 information: non-paged memory
> Register r9 information: non-slab/vmalloc memory
> Register r10 information: NULL pointer
> Register r11 information: non-slab/vmalloc memory
> Register r12 information: non-slab/vmalloc memory
> Process swapper/0 (pid: 0, stack limit = 0x82600000)
> Stack: (0x82601e08 to 0x82602000)
> 1e00: 80201410 80298db8 817f6f00 817f6de8 04200002 82604d40
> 1e20: ffff8d67 00000002 8404f4a8 00000001 831c0640 00000001 827e1666 00000000
> 1e40: 82601e7c 82601e50 808906c4 802160d0 00000003 8404f4a8 00000001 000000ff
> 1e60: dddd1798 00000001 827e1666 00000000 82601e8c 82601e80 80890d54 80890684
> 1e80: 82601ea4 82601e90 80891ae8 80890d0c 8326c9dc 000000ff 82601ebc 82601ea8
> 1ea0: 8107f920 80891aa4 8326c9dc 000000ff 82601ecc 82601ec0 8107dd50 8107f8d0
> 1ec0: 82601ee4 82601ed0 8107e09c 8107dd24 8326c9dc 84655294 82601f04 82601ee8
> 1ee0: 8107ef38 8107e044 000001fd 8290cee4 00000002 dddd1798 82601f2c 82601f08
> 1f00: 81080300 8107ef0c 00000000 8260c498 8261ae40 8260c4e0 00000000 827e1666
> 1f20: 82601f3c 82601f30 80208efc 8108025c 82601f84 82601f40 80293570 80208ef4
> 1f40: 8260c440 00000000 81f86214 824af2f8 817f6f00 cbc96766 82601f84 000000ea
> 1f60: 82625c7c 8260c440 00000000 8261a934 8260c440 82850000 82601f94 82601f88
> 1f80: 80293b00 80293500 82601fa4 82601f98 817f7c74 80293aec 82601fb4 82601fa8
> 1fa0: 82400bb8 817f7ba4 82601ff4 82601fb8 824012f8 82400bb4 00000000 00000000
> 1fc0: 00000000 00000000 ffffffff 00000000 00000000 820ad698 82484a70 00000000
> 1fe0: 00000000 000008e0 00000000 82601ff8 00000000 82400c24 00000000 00000000
> Backtrace:
> [<802160c4>] (do_page_fault) from [<808906c4>] (gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030)
> r10:00000000 r9:827e1666 r8:00000001 r7:831c0640 r6:00000001 r5:8404f4a8
> r4:00000002
> [<80890678>] (gpiod_set_raw_value_commit) from [<80890d54>] (gpiod_set_value_nocheck+0x54/0x58 drivers/gpio/gpiolib.c:3204)
> r10:00000000 r9:827e1666 r8:00000001 r7:dddd1798 r6:000000ff r5:00000001
> r4:8404f4a8 r3:00000003
> [<80890d00>] (gpiod_set_value_nocheck) from [<80891ae8>] (gpiod_set_value+0x50/0xc0 drivers/gpio/gpiolib.c:3223)
> [<80891a98>] (gpiod_set_value) from [<8107f920>] (gpio_led_set+0x5c/0x60 drivers/leds/leds-gpio.c:54)
> r5:000000ff r4:8326c9dc
> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (__led_set_brightness drivers/leds/led-core.c:47 [inline])
> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nopm drivers/leds/led-core.c:271 [inline])
> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nosleep+0x38/0x5c drivers/leds/led-core.c:287)
> r5:000000ff r4:8326c9dc
> [<8107dd18>] (led_set_brightness_nosleep) from [<8107e09c>] (led_set_brightness+0x64/0x68 drivers/leds/led-core.c:264)
> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event drivers/leds/led-triggers.c:390 [inline])
> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event+0x38/0x50 drivers/leds/led-triggers.c:380)
> r5:84655294 r4:8326c9dc
> [<8107ef00>] (led_trigger_event) from [<81080300>] (ledtrig_cpu+0xb0/0x100 drivers/leds/trigger/ledtrig-cpu.c:86)
> r7:dddd1798 r6:00000002 r5:8290cee4 r4:000001fd
> [<81080250>] (ledtrig_cpu) from [<80208efc>] (arch_cpu_idle_exit+0x14/0x18 arch/arm/kernel/process.c:98)
> r9:827e1666 r8:00000000 r7:8260c4e0 r6:8261ae40 r5:8260c498 r4:00000000
> [<80208ee8>] (arch_cpu_idle_exit) from [<80293570>] (do_idle+0x7c/0x2f0 kernel/sched/idle.c:284)
> [<802934f4>] (do_idle) from [<80293b00>] (cpu_startup_entry+0x20/0x24 kernel/sched/idle.c:379)
> r10:82850000 r9:8260c440 r8:8261a934 r7:00000000 r6:8260c440 r5:82625c7c
> r4:000000ea
> [<80293ae0>] (cpu_startup_entry) from [<817f7c74>] (rest_init+0xdc/0xe0 init/main.c:735)
> [<817f7b98>] (rest_init) from [<82400bb8>] (arch_post_acpi_subsys_init+0x0/0x20 init/main.c:834)
> [<82400ba8>] (arch_call_rest_init) from [<824012f8>] (start_kernel+0x6e0/0x70c init/main.c:1088)
> [<82400c18>] (start_kernel) from [<00000000>] (0x0)
> Code: e92ddff0 e24cb004 e24dd01c ee1d7f70 (e5923040)
> ---[ end trace 0000000000000000 ]---
> ----------------
> Code disassembly (best guess):
> 0: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
> 4: e24cb004 sub fp, ip, #4
> 8: e24dd01c sub sp, sp, #28
> c: ee1d7f70 mrc 15, 0, r7, cr13, cr0, {3}
> * 10: e5923040 ldr r3, [r2, #64] ; 0x40 <-- trapping instruction
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the bug is already fixed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to change bug's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the bug is a duplicate of another bug, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
>
> --
> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/000000000000f9c9a505fb4917f6%40google.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in do_page_fault
2023-05-10 9:20 ` Aleksandr Nogikh
@ 2023-05-10 9:20 ` syzbot
0 siblings, 0 replies; 3+ messages in thread
From: syzbot @ 2023-05-10 9:20 UTC (permalink / raw)
To: nogikh
Cc: brgl, linus.walleij, linux-gpio, linux-kernel, nogikh, syzkaller-bugs
> FWIW this is a yet another manifestation of
> https://lore.kernel.org/all/CANp29Y4Q-VWEWeHmZu0f9tLLik1Va8oDF-s8hAeVkBZbX4K0gg@mail.gmail.com/
>
> #syz dup: upstream boot error: BUG: unable to handle kernel NULL
can't find the dup bug
> pointer dereference in load_balance
>
> On Tue, May 9, 2023 at 11:04 PM syzbot
> <syzbot+49207572d7fa5be562a0@syzkaller.appspotmail.com> wrote:
>>
>> Hello,
>>
>> syzbot found the following issue on:
>>
>> HEAD commit: ba0ad6ed89fd media: nxp: imx8-isi: fix buiding on 32-bit
>> git tree: upstream
>> console output: https://syzkaller.appspot.com/x/log.txt?x=15c3d40c280000
>> kernel config: https://syzkaller.appspot.com/x/.config?x=cc86fee67199911d
>> dashboard link: https://syzkaller.appspot.com/bug?extid=49207572d7fa5be562a0
>> compiler: arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
>> userspace arch: arm
>>
>> Downloadable assets:
>> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/c35b5b2731d2/non_bootable_disk-ba0ad6ed.raw.xz
>> vmlinux: https://storage.googleapis.com/syzbot-assets/590de311efa7/vmlinux-ba0ad6ed.xz
>> kernel image: https://storage.googleapis.com/syzbot-assets/7007b545886c/zImage-ba0ad6ed.xz
>>
>> IMPORTANT: if you fix the issue, please add the following tag to the commit:
>> Reported-by: syzbot+49207572d7fa5be562a0@syzkaller.appspotmail.com
>>
>> Movable zone start for each node
>> Early memory node ranges
>> node 0: [mem 0x0000000080000000-0x00000000ffffffff]
>> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
>> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
>> Kernel command line: root=/dev/vda console=ttyAMA0 earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
>> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
>> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
>> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
>> Built 1 zonelists, mobility grouping on. Total pages: 520868
>> allocated 2097152 bytes of page_ext
>> mem auto-init: stack:off, heap alloc:on, heap free:off
>> software IO TLB: area num 2.
>> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
>> Memory: 1952316K/2097152K available (24576K kernel code, 2364K rwdata, 8404K rodata, 2048K init, 868K bss, 128452K reserved, 16384K cma-reserved, 524288K highmem)
>> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>> trace event string verifier disabled
>> rcu: Preemptible hierarchical RCU implementation.
>> rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>> rcu: RCU callback double-/use-after-free debug is enabled.
>> All grace periods are expedited (rcu_expedited).
>> Trampoline variant of Tasks RCU enabled.
>> Tracing variant of Tasks RCU enabled.
>> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
>> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>> GIC physical location is 0x2c001000
>> rcu: srcu_init: Setting srcu_struct sizes based on contention.
>> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
>> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
>> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
>> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
>> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
>> Switching to timer-based delay loop, resolution 16ns
>> Console: colour dummy device 80x30
>> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
>> pid_max: default: 32768 minimum: 301
>> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
>> landlock: Up and running.
>> Yama: becoming mindful.
>> TOMOYO Linux initialized
>> SELinux: Initializing.
>> LSM support for eBPF active
>> stackdepot: allocating hash table of 131072 entries via kvcalloc
>> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
>> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
>> CPU: Testing write buffer coherency: ok
>> CPU0: Spectre BHB: enabling loop workaround for all CPUs
>> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> 8<--- cut here ---
>> Unable to handle kernel NULL pointer dereference at virtual address 00000041 when read
>> [00000041] *pgd=80000080004003, *pmd=00000000
>> Internal error: Oops: 206 [#1] PREEMPT SMP ARM
>> Modules linked in:
>> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc1-syzkaller #0
>> Hardware name: ARM-Versatile Express
>> PC is at do_page_fault+0x14/0x3b8 arch/arm/mm/fault.c:276
>> LR is at gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030
>> pc : [<802160d8>] lr : [<808906c4>] psr: 40000113
>> sp : 82601e08 ip : 82601e50 fp : 82601e4c
>> r10: 00000000 r9 : 827e1666 r8 : 00000001
>> r7 : 8261ae40 r6 : 00000001 r5 : 8404f4a8 r4 : 00000002
>> r3 : 802160c4 r2 : 00000001 r1 : 00000002 r0 : 831c0640
>> Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
>> Control: 30c5387d Table: 80003000 DAC: fffffffd
>> Register r0 information: slab kmalloc-512 start 831c0600 pointer offset 64 size 512
>> Register r1 information: non-paged memory
>> Register r2 information: non-paged memory
>> Register r3 information: non-slab/vmalloc memory
>> Register r4 information: non-paged memory
>> Register r5 information: slab kmalloc-192 start 8404f480 pointer offset 40 size 192
>> Register r6 information: non-paged memory
>> Register r7 information: non-slab/vmalloc memory
>> Register r8 information: non-paged memory
>> Register r9 information: non-slab/vmalloc memory
>> Register r10 information: NULL pointer
>> Register r11 information: non-slab/vmalloc memory
>> Register r12 information: non-slab/vmalloc memory
>> Process swapper/0 (pid: 0, stack limit = 0x82600000)
>> Stack: (0x82601e08 to 0x82602000)
>> 1e00: 80201410 80298db8 817f6f00 817f6de8 04200002 82604d40
>> 1e20: ffff8d67 00000002 8404f4a8 00000001 831c0640 00000001 827e1666 00000000
>> 1e40: 82601e7c 82601e50 808906c4 802160d0 00000003 8404f4a8 00000001 000000ff
>> 1e60: dddd1798 00000001 827e1666 00000000 82601e8c 82601e80 80890d54 80890684
>> 1e80: 82601ea4 82601e90 80891ae8 80890d0c 8326c9dc 000000ff 82601ebc 82601ea8
>> 1ea0: 8107f920 80891aa4 8326c9dc 000000ff 82601ecc 82601ec0 8107dd50 8107f8d0
>> 1ec0: 82601ee4 82601ed0 8107e09c 8107dd24 8326c9dc 84655294 82601f04 82601ee8
>> 1ee0: 8107ef38 8107e044 000001fd 8290cee4 00000002 dddd1798 82601f2c 82601f08
>> 1f00: 81080300 8107ef0c 00000000 8260c498 8261ae40 8260c4e0 00000000 827e1666
>> 1f20: 82601f3c 82601f30 80208efc 8108025c 82601f84 82601f40 80293570 80208ef4
>> 1f40: 8260c440 00000000 81f86214 824af2f8 817f6f00 cbc96766 82601f84 000000ea
>> 1f60: 82625c7c 8260c440 00000000 8261a934 8260c440 82850000 82601f94 82601f88
>> 1f80: 80293b00 80293500 82601fa4 82601f98 817f7c74 80293aec 82601fb4 82601fa8
>> 1fa0: 82400bb8 817f7ba4 82601ff4 82601fb8 824012f8 82400bb4 00000000 00000000
>> 1fc0: 00000000 00000000 ffffffff 00000000 00000000 820ad698 82484a70 00000000
>> 1fe0: 00000000 000008e0 00000000 82601ff8 00000000 82400c24 00000000 00000000
>> Backtrace:
>> [<802160c4>] (do_page_fault) from [<808906c4>] (gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030)
>> r10:00000000 r9:827e1666 r8:00000001 r7:831c0640 r6:00000001 r5:8404f4a8
>> r4:00000002
>> [<80890678>] (gpiod_set_raw_value_commit) from [<80890d54>] (gpiod_set_value_nocheck+0x54/0x58 drivers/gpio/gpiolib.c:3204)
>> r10:00000000 r9:827e1666 r8:00000001 r7:dddd1798 r6:000000ff r5:00000001
>> r4:8404f4a8 r3:00000003
>> [<80890d00>] (gpiod_set_value_nocheck) from [<80891ae8>] (gpiod_set_value+0x50/0xc0 drivers/gpio/gpiolib.c:3223)
>> [<80891a98>] (gpiod_set_value) from [<8107f920>] (gpio_led_set+0x5c/0x60 drivers/leds/leds-gpio.c:54)
>> r5:000000ff r4:8326c9dc
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (__led_set_brightness drivers/leds/led-core.c:47 [inline])
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nopm drivers/leds/led-core.c:271 [inline])
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nosleep+0x38/0x5c drivers/leds/led-core.c:287)
>> r5:000000ff r4:8326c9dc
>> [<8107dd18>] (led_set_brightness_nosleep) from [<8107e09c>] (led_set_brightness+0x64/0x68 drivers/leds/led-core.c:264)
>> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event drivers/leds/led-triggers.c:390 [inline])
>> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event+0x38/0x50 drivers/leds/led-triggers.c:380)
>> r5:84655294 r4:8326c9dc
>> [<8107ef00>] (led_trigger_event) from [<81080300>] (ledtrig_cpu+0xb0/0x100 drivers/leds/trigger/ledtrig-cpu.c:86)
>> r7:dddd1798 r6:00000002 r5:8290cee4 r4:000001fd
>> [<81080250>] (ledtrig_cpu) from [<80208efc>] (arch_cpu_idle_exit+0x14/0x18 arch/arm/kernel/process.c:98)
>> r9:827e1666 r8:00000000 r7:8260c4e0 r6:8261ae40 r5:8260c498 r4:00000000
>> [<80208ee8>] (arch_cpu_idle_exit) from [<80293570>] (do_idle+0x7c/0x2f0 kernel/sched/idle.c:284)
>> [<802934f4>] (do_idle) from [<80293b00>] (cpu_startup_entry+0x20/0x24 kernel/sched/idle.c:379)
>> r10:82850000 r9:8260c440 r8:8261a934 r7:00000000 r6:8260c440 r5:82625c7c
>> r4:000000ea
>> [<80293ae0>] (cpu_startup_entry) from [<817f7c74>] (rest_init+0xdc/0xe0 init/main.c:735)
>> [<817f7b98>] (rest_init) from [<82400bb8>] (arch_post_acpi_subsys_init+0x0/0x20 init/main.c:834)
>> [<82400ba8>] (arch_call_rest_init) from [<824012f8>] (start_kernel+0x6e0/0x70c init/main.c:1088)
>> [<82400c18>] (start_kernel) from [<00000000>] (0x0)
>> Code: e92ddff0 e24cb004 e24dd01c ee1d7f70 (e5923040)
>> ---[ end trace 0000000000000000 ]---
>> ----------------
>> Code disassembly (best guess):
>> 0: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
>> 4: e24cb004 sub fp, ip, #4
>> 8: e24dd01c sub sp, sp, #28
>> c: ee1d7f70 mrc 15, 0, r7, cr13, cr0, {3}
>> * 10: e5923040 ldr r3, [r2, #64] ; 0x40 <-- trapping instruction
>>
>>
>> ---
>> This report is generated by a bot. It may contain errors.
>> See https://goo.gl/tpsmEJ for more information about syzbot.
>> syzbot engineers can be reached at syzkaller@googlegroups.com.
>>
>> syzbot will keep track of this issue. See:
>> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>>
>> If the bug is already fixed, let syzbot know by replying with:
>> #syz fix: exact-commit-title
>>
>> If you want to change bug's subsystems, reply with:
>> #syz set subsystems: new-subsystem
>> (See the list of subsystem names on the web dashboard)
>>
>> If the bug is a duplicate of another bug, reply with:
>> #syz dup: exact-subject-of-another-report
>>
>> If you want to undo deduplication, reply with:
>> #syz undup
>>
>> --
>> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@googlegroups.com.
>> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/000000000000f9c9a505fb4917f6%40google.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-05-10 9:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-09 21:03 [syzbot] upstream boot error: BUG: unable to handle kernel NULL pointer dereference in do_page_fault syzbot
2023-05-10 9:20 ` Aleksandr Nogikh
2023-05-10 9:20 ` syzbot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).