* [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix
@ 2017-05-03 15:04 Olimpiu Dejeu
2017-05-03 15:04 ` [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand Olimpiu Dejeu
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Olimpiu Dejeu @ 2017-05-03 15:04 UTC (permalink / raw)
To: robh
Cc: lee.jones, linux-kernel, linux-fbdev, devicetree, jingoohan1,
bdodge, joe, daniel.thompson, lkp, fengguang.wu, Olimpiu Dejeu
backlight: Add arc to vendor prefixes
Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
---
v9 => v10:
- Per Rob Herring's request changed vendor-prefix to arctic
v8 => v9:
- Version updated to match other patch in set. No other changes.
v8:
- Version to match other patches in set
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 16d3b5e..6f33a4b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -28,6 +28,7 @@ andestech Andes Technology Corporation
apm Applied Micro Circuits Corporation (APM)
aptina Aptina Imaging
arasan Arasan Chip Systems
+arctic Arctic Sand
aries Aries Embedded GmbH
arm ARM Ltd.
armadeus ARMadeus Systems SARL
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand
2017-05-03 15:04 [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Olimpiu Dejeu
@ 2017-05-03 15:04 ` Olimpiu Dejeu
2017-05-05 7:57 ` Lee Jones
2017-05-03 15:04 ` [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices Olimpiu Dejeu
2017-05-05 7:54 ` [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Lee Jones
2 siblings, 1 reply; 8+ messages in thread
From: Olimpiu Dejeu @ 2017-05-03 15:04 UTC (permalink / raw)
To: robh
Cc: lee.jones, linux-kernel, linux-fbdev, devicetree, jingoohan1,
bdodge, joe, daniel.thompson, lkp, fengguang.wu, Olimpiu Dejeu
backlight: Add devicetree bindings for the Arctic Sand backlight driver
This patch provides devicetree bindings for the Arctic Sand
driver submitted in the previous patch
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
---
v9 => v10:
- Per Rob Herring's request changed vendor-prefix to arctic
v8 => v9:
- Version updated to match other patch in set. No other changes.
v7 => v8:
- Version updated to match other patch in set. No other changes.
v6 => v7:
- Version updated to match other patch in set. No other changes.
v5 => v6:
- Version updated to match other patch in set. No other changes.
v4 => v5:
- Added spaces for increased readability per Lee Jones
v3 => v4:
- Added spaces for increased readability per Lee Jones
v2 => v3:
- Version updated to match other patch in set. No other changes.
v1 => v2:
- Version updated to match other patch in set. No other changes.
.../bindings/leds/backlight/arcxcnn_bl.txt | 33 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
new file mode 100644
index 0000000..ecb7731
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
@@ -0,0 +1,33 @@
+Binding for ArcticSand arc2c0608 LED driver
+
+Required properties:
+- compatible: should be "arctic,arc2c0608"
+- reg: slave address
+
+Optional properties:
+- default-brightness: brightness value on boot, value from: 0-4095
+- label: The name of the backlight device
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-sources: List of enabled channels from 0 to 5.
+ See Documentation/devicetree/bindings/leds/common.txt
+
+- arctic,led-config-0: setting for register ILED_CONFIG_0
+- arctic,led-config-1: setting for register ILED_CONFIG_1
+- arctic,dim-freq: PWM mode frequence setting (bits [3:0] used)
+- arctic,comp-config: setting for register CONFIG_COMP
+- arctic,filter-config: setting for register FILTER_CONFIG
+- arctic,trim-config: setting for register IMAXTUNE
+
+Note: Optional properties not specified will default to values in IC EPROM
+
+Example:
+
+arc2c0608@30 {
+ compatible = "arctic,arc2c0608";
+ reg = <0x30>;
+ default-brightness = <500>;
+ label = "lcd-backlight";
+ linux,default-trigger = "backlight";
+ led-sources = <0 1 2 5>;
+};
+
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices
2017-05-03 15:04 [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Olimpiu Dejeu
2017-05-03 15:04 ` [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand Olimpiu Dejeu
@ 2017-05-03 15:04 ` Olimpiu Dejeu
2017-05-05 7:57 ` Lee Jones
2017-05-05 7:54 ` [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Lee Jones
2 siblings, 1 reply; 8+ messages in thread
From: Olimpiu Dejeu @ 2017-05-03 15:04 UTC (permalink / raw)
To: robh
Cc: lee.jones, linux-kernel, linux-fbdev, devicetree, jingoohan1,
bdodge, joe, daniel.thompson, lkp, fengguang.wu, Olimpiu Dejeu
backlight: Add support for Arctic Sand LED backlight driver chips
This driver provides support for the Arctic Sand arc2c0608 chip,
and provides a framework to support future devices.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
---
v9 => v10:
- Per Rob Herring's request changed vendor-prefix to arctic
v8 => v9:
- Addressing kbuild test robot WARNING: PTR_ERR_OR_ZERO can be used
v7 => v8:
- Version updated to match other patch in set. No other changes.
v6 => v7:
- Addressing issues brought up by Daniel Thompson
v5 => v6:
- Addressing issues brought up by Daniel Thompson
v4 => v5:
- Code style changes per Joe Perches and Jingoo Han
v3 => v4:
- Code style changes per Joe Perches and Jingoo Han
v2 => v3:
- Renamed variables to comply with conventions on naming
- Corrected device name in arcxcnn.h
v1 => v2:
- Removed "magic numbers" to initialize registers
- Cleaned up device tree bindings
- Fixed code style to address comments and pass "checkpatch"
- Removed unneeded debug and testing code
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/arcxcnn_bl.c | 419 +++++++++++++++++++++++++++++++++++
3 files changed, 427 insertions(+)
create mode 100644 drivers/video/backlight/arcxcnn_bl.c
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 5ffa4b4..4e1d2ad 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -460,6 +460,13 @@ config BACKLIGHT_BD6107
help
If you have a Rohm BD6107 say Y to enable the backlight driver.
+config BACKLIGHT_ARCXCNN
+ tristate "Backlight driver for the Arctic Sands ARCxCnnnn family"
+ depends on I2C
+ help
+ If you have an ARCxCnnnn family backlight say Y to enable
+ the backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 16ec534..8905129 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
+obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o
diff --git a/drivers/video/backlight/arcxcnn_bl.c b/drivers/video/backlight/arcxcnn_bl.c
new file mode 100644
index 0000000..e01b1b0
--- /dev/null
+++ b/drivers/video/backlight/arcxcnn_bl.c
@@ -0,0 +1,419 @@
+/*
+ * Backlight driver for ArcticSand ARC_X_C_0N_0N Devices
+ *
+ * Copyright 2016 ArcticSand, Inc.
+ * Author : Brian Dodge <bdodge@arcticsand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+enum arcxcnn_chip_id {
+ ARC2C0608
+};
+
+/**
+ * struct arcxcnn_platform_data
+ * @name : Backlight driver name (NULL will use default)
+ * @initial_brightness : initial value of backlight brightness
+ * @leden : initial LED string enables, upper bit is global on/off
+ * @led_config_0 : fading speed (period between intensity steps)
+ * @led_config_1 : misc settings, see datasheet
+ * @dim_freq : pwm dimming frequency if in pwm mode
+ * @comp_config : misc config, see datasheet
+ * @filter_config : RC/PWM filter config, see datasheet
+ * @trim_config : full scale current trim, see datasheet
+ */
+struct arcxcnn_platform_data {
+ const char *name;
+ u16 initial_brightness;
+ u8 leden;
+ u8 led_config_0;
+ u8 led_config_1;
+ u8 dim_freq;
+ u8 comp_config;
+ u8 filter_config;
+ u8 trim_config;
+};
+
+#define ARCXCNN_CMD 0x00 /* Command Register */
+#define ARCXCNN_CMD_STDBY 0x80 /* I2C Standby */
+#define ARCXCNN_CMD_RESET 0x40 /* Reset */
+#define ARCXCNN_CMD_BOOST 0x10 /* Boost */
+#define ARCXCNN_CMD_OVP_MASK 0x0C /* --- Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_XXV 0x0C /* <rsvrd> Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_20V 0x08 /* 20v Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_24V 0x04 /* 24v Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_31V 0x00 /* 31.4v Over Voltage Threshold */
+#define ARCXCNN_CMD_EXT_COMP 0x01 /* part (0) or full (1) ext. comp */
+
+#define ARCXCNN_CONFIG 0x01 /* Configuration */
+#define ARCXCNN_STATUS1 0x02 /* Status 1 */
+#define ARCXCNN_STATUS2 0x03 /* Status 2 */
+#define ARCXCNN_FADECTRL 0x04 /* Fading Control */
+#define ARCXCNN_ILED_CONFIG 0x05 /* ILED Configuration */
+#define ARCXCNN_ILED_DIM_PWM 0x00 /* config dim mode pwm */
+#define ARCXCNN_ILED_DIM_INT 0x04 /* config dim mode internal */
+#define ARCXCNN_LEDEN 0x06 /* LED Enable Register */
+#define ARCXCNN_LEDEN_ISETEXT 0x80 /* Full-scale current set extern */
+#define ARCXCNN_LEDEN_MASK 0x3F /* LED string enables mask */
+#define ARCXCNN_LEDEN_BITS 0x06 /* Bits of LED string enables */
+#define ARCXCNN_LEDEN_LED1 0x01
+#define ARCXCNN_LEDEN_LED2 0x02
+#define ARCXCNN_LEDEN_LED3 0x04
+#define ARCXCNN_LEDEN_LED4 0x08
+#define ARCXCNN_LEDEN_LED5 0x10
+#define ARCXCNN_LEDEN_LED6 0x20
+
+#define ARCXCNN_WLED_ISET_LSB 0x07 /* LED ISET LSB (in upper nibble) */
+#define ARCXCNN_WLED_ISET_LSB_SHIFT 0x04 /* ISET LSB Left Shift */
+#define ARCXCNN_WLED_ISET_MSB 0x08 /* LED ISET MSB (8 bits) */
+
+#define ARCXCNN_DIMFREQ 0x09
+#define ARCXCNN_COMP_CONFIG 0x0A
+#define ARCXCNN_FILT_CONFIG 0x0B
+#define ARCXCNN_IMAXTUNE 0x0C
+#define ARCXCNN_ID_MSB 0x1E
+#define ARCXCNN_ID_LSB 0x1F
+
+#define MAX_BRIGHTNESS 4095
+#define INIT_BRIGHT 60
+
+struct arcxcnn {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct arcxcnn_platform_data *pdata;
+};
+
+static int arcxcnn_update_field(struct arcxcnn *lp, u8 reg, u8 mask, u8 data)
+{
+ int ret;
+ u8 tmp;
+
+ ret = i2c_smbus_read_byte_data(lp->client, reg);
+ if (ret < 0) {
+ dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
+ return ret;
+ }
+
+ tmp = (u8)ret;
+ tmp &= ~mask;
+ tmp |= data & mask;
+
+ return i2c_smbus_write_byte_data(lp->client, reg, tmp);
+}
+
+static int arcxcnn_set_brightness(struct arcxcnn *lp, u32 brightness)
+{
+ int ret;
+ u8 val;
+
+ /* lower nibble of brightness goes in upper nibble of LSB register */
+ val = (brightness & 0xF) << ARCXCNN_WLED_ISET_LSB_SHIFT;
+ ret = i2c_smbus_write_byte_data(lp->client,
+ ARCXCNN_WLED_ISET_LSB, val);
+ if (ret < 0)
+ return ret;
+
+ /* remaining 8 bits of brightness go in MSB register */
+ val = (brightness >> 4);
+ return i2c_smbus_write_byte_data(lp->client,
+ ARCXCNN_WLED_ISET_MSB, val);
+}
+
+static int arcxcnn_bl_update_status(struct backlight_device *bl)
+{
+ struct arcxcnn *lp = bl_get_data(bl);
+ u32 brightness = bl->props.brightness;
+ int ret;
+
+ if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+ brightness = 0;
+
+ ret = arcxcnn_set_brightness(lp, brightness);
+ if (ret)
+ return ret;
+
+ /* set power-on/off/save modes */
+ return arcxcnn_update_field(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY,
+ (bl->props.power == 0) ? 0 : ARCXCNN_CMD_STDBY);
+}
+
+static const struct backlight_ops arcxcnn_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = arcxcnn_bl_update_status,
+};
+
+static int arcxcnn_backlight_register(struct arcxcnn *lp)
+{
+ struct backlight_properties *props;
+ const char *name = lp->pdata->name ? : "arctic_bl";
+
+ props = devm_kzalloc(lp->dev, sizeof(*props), GFP_KERNEL);
+ if (!props)
+ return -ENOMEM;
+
+ props->type = BACKLIGHT_PLATFORM;
+ props->max_brightness = MAX_BRIGHTNESS;
+
+ if (lp->pdata->initial_brightness > props->max_brightness)
+ lp->pdata->initial_brightness = props->max_brightness;
+
+ props->brightness = lp->pdata->initial_brightness;
+
+ lp->bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
+ &arcxcnn_bl_ops, props);
+ return PTR_ERR_OR_ZERO(lp->bl);
+}
+
+static void arcxcnn_parse_dt(struct arcxcnn *lp)
+{
+ struct device *dev = lp->dev;
+ struct device_node *node = dev->of_node;
+ u32 prog_val, num_entry, entry, sources[ARCXCNN_LEDEN_BITS];
+ int ret;
+
+ /* device tree entry isn't required, defaults are OK */
+ if (!node)
+ return;
+
+ ret = of_property_read_string(node, "label", &lp->pdata->name);
+ if (ret < 0)
+ lp->pdata->name = NULL;
+
+ ret = of_property_read_u32(node, "default-brightness", &prog_val);
+ if (ret == 0)
+ lp->pdata->initial_brightness = prog_val;
+
+ ret = of_property_read_u32(node, "arctic,led-config-0", &prog_val);
+ if (ret == 0)
+ lp->pdata->led_config_0 = (u8)prog_val;
+
+ ret = of_property_read_u32(node, "arctic,led-config-1", &prog_val);
+ if (ret == 0)
+ lp->pdata->led_config_1 = (u8)prog_val;
+
+ ret = of_property_read_u32(node, "arctic,dim-freq", &prog_val);
+ if (ret == 0)
+ lp->pdata->dim_freq = (u8)prog_val;
+
+ ret = of_property_read_u32(node, "arctic,comp-config", &prog_val);
+ if (ret == 0)
+ lp->pdata->comp_config = (u8)prog_val;
+
+ ret = of_property_read_u32(node, "arctic,filter-config", &prog_val);
+ if (ret == 0)
+ lp->pdata->filter_config = (u8)prog_val;
+
+ ret = of_property_read_u32(node, "arctic,trim-config", &prog_val);
+ if (ret == 0)
+ lp->pdata->trim_config = (u8)prog_val;
+
+ ret = of_property_count_u32_elems(node, "led-sources");
+ if (ret < 0) {
+ lp->pdata->leden = ARCXCNN_LEDEN_MASK; /* all on is default */
+ } else {
+ num_entry = ret;
+ if (num_entry > ARCXCNN_LEDEN_BITS)
+ num_entry = ARCXCNN_LEDEN_BITS;
+
+ ret = of_property_read_u32_array(node, "led-sources", sources,
+ num_entry);
+ if (ret < 0) {
+ dev_err(dev, "led-sources node is invalid.\n");
+ return;
+ }
+
+ lp->pdata->leden = 0;
+
+ /* for each enable in source, set bit in led enable */
+ for (entry = 0; entry < num_entry; entry++) {
+ u8 onbit = 1 << sources[entry];
+
+ lp->pdata->leden |= onbit;
+ }
+ }
+}
+
+static int arcxcnn_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct arcxcnn *lp;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ lp = devm_kzalloc(&cl->dev, sizeof(*lp), GFP_KERNEL);
+ if (!lp)
+ return -ENOMEM;
+
+ lp->client = cl;
+ lp->dev = &cl->dev;
+ lp->pdata = dev_get_platdata(&cl->dev);
+
+ /* reset the device */
+ ret = i2c_smbus_write_byte_data(lp->client,
+ ARCXCNN_CMD, ARCXCNN_CMD_RESET);
+ if (ret)
+ goto probe_err;
+
+ if (!lp->pdata) {
+ lp->pdata = devm_kzalloc(lp->dev,
+ sizeof(*lp->pdata), GFP_KERNEL);
+ if (!lp->pdata)
+ return -ENOMEM;
+
+ /* Setup defaults based on power-on defaults */
+ lp->pdata->name = NULL;
+ lp->pdata->initial_brightness = INIT_BRIGHT;
+ lp->pdata->leden = ARCXCNN_LEDEN_MASK;
+
+ lp->pdata->led_config_0 = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_FADECTRL);
+
+ lp->pdata->led_config_1 = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_ILED_CONFIG);
+ /* insure dim mode is not default pwm */
+ lp->pdata->led_config_1 |= ARCXCNN_ILED_DIM_INT;
+
+ lp->pdata->dim_freq = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_DIMFREQ);
+
+ lp->pdata->comp_config = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_COMP_CONFIG);
+
+ lp->pdata->filter_config = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_FILT_CONFIG);
+
+ lp->pdata->trim_config = i2c_smbus_read_byte_data(
+ lp->client, ARCXCNN_IMAXTUNE);
+
+ if (IS_ENABLED(CONFIG_OF))
+ arcxcnn_parse_dt(lp);
+ }
+
+ i2c_set_clientdata(cl, lp);
+
+ /* constrain settings to what is possible */
+ if (lp->pdata->initial_brightness > MAX_BRIGHTNESS)
+ lp->pdata->initial_brightness = MAX_BRIGHTNESS;
+
+ /* set initial brightness */
+ ret = arcxcnn_set_brightness(lp, lp->pdata->initial_brightness);
+ if (ret)
+ goto probe_err;
+
+ /* set other register values directly */
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FADECTRL,
+ lp->pdata->led_config_0);
+ if (ret)
+ goto probe_err;
+
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_ILED_CONFIG,
+ lp->pdata->led_config_1);
+ if (ret)
+ goto probe_err;
+
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_DIMFREQ,
+ lp->pdata->dim_freq);
+ if (ret)
+ goto probe_err;
+
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_COMP_CONFIG,
+ lp->pdata->comp_config);
+ if (ret)
+ goto probe_err;
+
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FILT_CONFIG,
+ lp->pdata->filter_config);
+ if (ret)
+ goto probe_err;
+
+ ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_IMAXTUNE,
+ lp->pdata->trim_config);
+ if (ret)
+ goto probe_err;
+
+ /* set initial LED Enables */
+ arcxcnn_update_field(lp, ARCXCNN_LEDEN,
+ ARCXCNN_LEDEN_MASK, lp->pdata->leden);
+
+ ret = arcxcnn_backlight_register(lp);
+ if (ret)
+ goto probe_register_err;
+
+ backlight_update_status(lp->bl);
+
+ return 0;
+
+probe_register_err:
+ dev_err(lp->dev,
+ "failed to register backlight.\n");
+
+probe_err:
+ dev_err(lp->dev,
+ "failure ret: %d\n", ret);
+ return ret;
+}
+
+static int arcxcnn_remove(struct i2c_client *cl)
+{
+ struct arcxcnn *lp = i2c_get_clientdata(cl);
+
+ /* disable all strings (ignore errors) */
+ i2c_smbus_write_byte_data(lp->client,
+ ARCXCNN_LEDEN, 0x00);
+ /* reset the device (ignore errors) */
+ i2c_smbus_write_byte_data(lp->client,
+ ARCXCNN_CMD, ARCXCNN_CMD_RESET);
+
+ lp->bl->props.brightness = 0;
+
+ backlight_update_status(lp->bl);
+
+ return 0;
+}
+
+static const struct of_device_id arcxcnn_dt_ids[] = {
+ { .compatible = "arctic,arc2c0608" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, arcxcnn_dt_ids);
+
+static const struct i2c_device_id arcxcnn_ids[] = {
+ {"arc2c0608", ARC2C0608},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, arcxcnn_ids);
+
+static struct i2c_driver arcxcnn_driver = {
+ .driver = {
+ .name = "arcxcnn_bl",
+ .of_match_table = of_match_ptr(arcxcnn_dt_ids),
+ },
+ .probe = arcxcnn_probe,
+ .remove = arcxcnn_remove,
+ .id_table = arcxcnn_ids,
+};
+module_i2c_driver(arcxcnn_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Dodge <bdodge@arcticsand.com>");
+MODULE_DESCRIPTION("ARCXCNN Backlight driver");
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix
2017-05-03 15:04 [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Olimpiu Dejeu
2017-05-03 15:04 ` [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand Olimpiu Dejeu
2017-05-03 15:04 ` [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices Olimpiu Dejeu
@ 2017-05-05 7:54 ` Lee Jones
2 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2017-05-05 7:54 UTC (permalink / raw)
To: Olimpiu Dejeu
Cc: robh, linux-kernel, linux-fbdev, devicetree, jingoohan1, bdodge,
joe, daniel.thompson, lkp, fengguang.wu
Your subject line is not in the correct format.
> backlight: Add arc to vendor prefixes
This is kind of the correct format, but this patch is not a
'backlight' patch, it's a 'dt-bindings: vendor-prefixes:' one.
Leave a '\n' here.
> Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
> ---
> v9 => v10:
> - Per Rob Herring's request changed vendor-prefix to arctic
> v8 => v9:
> - Version updated to match other patch in set. No other changes.
> v8:
> - Version to match other patches in set
>
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 16d3b5e..6f33a4b 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -28,6 +28,7 @@ andestech Andes Technology Corporation
> apm Applied Micro Circuits Corporation (APM)
> aptina Aptina Imaging
> arasan Arasan Chip Systems
> +arctic Arctic Sand
> aries Aries Embedded GmbH
> arm ARM Ltd.
> armadeus ARMadeus Systems SARL
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices
2017-05-03 15:04 ` [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices Olimpiu Dejeu
@ 2017-05-05 7:57 ` Lee Jones
2017-05-05 17:06 ` Olimpiu Dejeu
0 siblings, 1 reply; 8+ messages in thread
From: Lee Jones @ 2017-05-05 7:57 UTC (permalink / raw)
To: Olimpiu Dejeu
Cc: robh, linux-kernel, linux-fbdev, devicetree, jingoohan1, bdodge,
joe, daniel.thompson, lkp, fengguang.wu
On Wed, 03 May 2017, Olimpiu Dejeu wrote:
> backlight: Add support for Arctic Sand LED backlight driver chips
This should be the subject line of the patch.
Out of interest, how are you submitting your patches?
If you're not already, you should be using:
`git format-patch ...`
`git send-email ...`
> This driver provides support for the Arctic Sand arc2c0608 chip,
> and provides a framework to support future devices.
'\n' here.
> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
> Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
Biggest point however is that this patch is already in Mainline.
> ---
> v9 => v10:
> - Per Rob Herring's request changed vendor-prefix to arctic
> v8 => v9:
> - Addressing kbuild test robot WARNING: PTR_ERR_OR_ZERO can be used
> v7 => v8:
> - Version updated to match other patch in set. No other changes.
> v6 => v7:
> - Addressing issues brought up by Daniel Thompson
> v5 => v6:
> - Addressing issues brought up by Daniel Thompson
> v4 => v5:
> - Code style changes per Joe Perches and Jingoo Han
> v3 => v4:
> - Code style changes per Joe Perches and Jingoo Han
> v2 => v3:
> - Renamed variables to comply with conventions on naming
> - Corrected device name in arcxcnn.h
> v1 => v2:
> - Removed "magic numbers" to initialize registers
> - Cleaned up device tree bindings
> - Fixed code style to address comments and pass "checkpatch"
> - Removed unneeded debug and testing code
>
>
> drivers/video/backlight/Kconfig | 7 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/arcxcnn_bl.c | 419 +++++++++++++++++++++++++++++++++++
> 3 files changed, 427 insertions(+)
> create mode 100644 drivers/video/backlight/arcxcnn_bl.c
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 5ffa4b4..4e1d2ad 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -460,6 +460,13 @@ config BACKLIGHT_BD6107
> help
> If you have a Rohm BD6107 say Y to enable the backlight driver.
>
> +config BACKLIGHT_ARCXCNN
> + tristate "Backlight driver for the Arctic Sands ARCxCnnnn family"
> + depends on I2C
> + help
> + If you have an ARCxCnnnn family backlight say Y to enable
> + the backlight driver.
> +
> endif # BACKLIGHT_CLASS_DEVICE
>
> endif # BACKLIGHT_LCD_SUPPORT
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index 16ec534..8905129 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -55,3 +55,4 @@ obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
> obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
> obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> +obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o
> diff --git a/drivers/video/backlight/arcxcnn_bl.c b/drivers/video/backlight/arcxcnn_bl.c
> new file mode 100644
> index 0000000..e01b1b0
> --- /dev/null
> +++ b/drivers/video/backlight/arcxcnn_bl.c
> @@ -0,0 +1,419 @@
> +/*
> + * Backlight driver for ArcticSand ARC_X_C_0N_0N Devices
> + *
> + * Copyright 2016 ArcticSand, Inc.
> + * Author : Brian Dodge <bdodge@arcticsand.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +
> +enum arcxcnn_chip_id {
> + ARC2C0608
> +};
> +
> +/**
> + * struct arcxcnn_platform_data
> + * @name : Backlight driver name (NULL will use default)
> + * @initial_brightness : initial value of backlight brightness
> + * @leden : initial LED string enables, upper bit is global on/off
> + * @led_config_0 : fading speed (period between intensity steps)
> + * @led_config_1 : misc settings, see datasheet
> + * @dim_freq : pwm dimming frequency if in pwm mode
> + * @comp_config : misc config, see datasheet
> + * @filter_config : RC/PWM filter config, see datasheet
> + * @trim_config : full scale current trim, see datasheet
> + */
> +struct arcxcnn_platform_data {
> + const char *name;
> + u16 initial_brightness;
> + u8 leden;
> + u8 led_config_0;
> + u8 led_config_1;
> + u8 dim_freq;
> + u8 comp_config;
> + u8 filter_config;
> + u8 trim_config;
> +};
> +
> +#define ARCXCNN_CMD 0x00 /* Command Register */
> +#define ARCXCNN_CMD_STDBY 0x80 /* I2C Standby */
> +#define ARCXCNN_CMD_RESET 0x40 /* Reset */
> +#define ARCXCNN_CMD_BOOST 0x10 /* Boost */
> +#define ARCXCNN_CMD_OVP_MASK 0x0C /* --- Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_XXV 0x0C /* <rsvrd> Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_20V 0x08 /* 20v Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_24V 0x04 /* 24v Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_31V 0x00 /* 31.4v Over Voltage Threshold */
> +#define ARCXCNN_CMD_EXT_COMP 0x01 /* part (0) or full (1) ext. comp */
> +
> +#define ARCXCNN_CONFIG 0x01 /* Configuration */
> +#define ARCXCNN_STATUS1 0x02 /* Status 1 */
> +#define ARCXCNN_STATUS2 0x03 /* Status 2 */
> +#define ARCXCNN_FADECTRL 0x04 /* Fading Control */
> +#define ARCXCNN_ILED_CONFIG 0x05 /* ILED Configuration */
> +#define ARCXCNN_ILED_DIM_PWM 0x00 /* config dim mode pwm */
> +#define ARCXCNN_ILED_DIM_INT 0x04 /* config dim mode internal */
> +#define ARCXCNN_LEDEN 0x06 /* LED Enable Register */
> +#define ARCXCNN_LEDEN_ISETEXT 0x80 /* Full-scale current set extern */
> +#define ARCXCNN_LEDEN_MASK 0x3F /* LED string enables mask */
> +#define ARCXCNN_LEDEN_BITS 0x06 /* Bits of LED string enables */
> +#define ARCXCNN_LEDEN_LED1 0x01
> +#define ARCXCNN_LEDEN_LED2 0x02
> +#define ARCXCNN_LEDEN_LED3 0x04
> +#define ARCXCNN_LEDEN_LED4 0x08
> +#define ARCXCNN_LEDEN_LED5 0x10
> +#define ARCXCNN_LEDEN_LED6 0x20
> +
> +#define ARCXCNN_WLED_ISET_LSB 0x07 /* LED ISET LSB (in upper nibble) */
> +#define ARCXCNN_WLED_ISET_LSB_SHIFT 0x04 /* ISET LSB Left Shift */
> +#define ARCXCNN_WLED_ISET_MSB 0x08 /* LED ISET MSB (8 bits) */
> +
> +#define ARCXCNN_DIMFREQ 0x09
> +#define ARCXCNN_COMP_CONFIG 0x0A
> +#define ARCXCNN_FILT_CONFIG 0x0B
> +#define ARCXCNN_IMAXTUNE 0x0C
> +#define ARCXCNN_ID_MSB 0x1E
> +#define ARCXCNN_ID_LSB 0x1F
> +
> +#define MAX_BRIGHTNESS 4095
> +#define INIT_BRIGHT 60
> +
> +struct arcxcnn {
> + struct i2c_client *client;
> + struct backlight_device *bl;
> + struct device *dev;
> + struct arcxcnn_platform_data *pdata;
> +};
> +
> +static int arcxcnn_update_field(struct arcxcnn *lp, u8 reg, u8 mask, u8 data)
> +{
> + int ret;
> + u8 tmp;
> +
> + ret = i2c_smbus_read_byte_data(lp->client, reg);
> + if (ret < 0) {
> + dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
> + return ret;
> + }
> +
> + tmp = (u8)ret;
> + tmp &= ~mask;
> + tmp |= data & mask;
> +
> + return i2c_smbus_write_byte_data(lp->client, reg, tmp);
> +}
> +
> +static int arcxcnn_set_brightness(struct arcxcnn *lp, u32 brightness)
> +{
> + int ret;
> + u8 val;
> +
> + /* lower nibble of brightness goes in upper nibble of LSB register */
> + val = (brightness & 0xF) << ARCXCNN_WLED_ISET_LSB_SHIFT;
> + ret = i2c_smbus_write_byte_data(lp->client,
> + ARCXCNN_WLED_ISET_LSB, val);
> + if (ret < 0)
> + return ret;
> +
> + /* remaining 8 bits of brightness go in MSB register */
> + val = (brightness >> 4);
> + return i2c_smbus_write_byte_data(lp->client,
> + ARCXCNN_WLED_ISET_MSB, val);
> +}
> +
> +static int arcxcnn_bl_update_status(struct backlight_device *bl)
> +{
> + struct arcxcnn *lp = bl_get_data(bl);
> + u32 brightness = bl->props.brightness;
> + int ret;
> +
> + if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> + brightness = 0;
> +
> + ret = arcxcnn_set_brightness(lp, brightness);
> + if (ret)
> + return ret;
> +
> + /* set power-on/off/save modes */
> + return arcxcnn_update_field(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY,
> + (bl->props.power == 0) ? 0 : ARCXCNN_CMD_STDBY);
> +}
> +
> +static const struct backlight_ops arcxcnn_bl_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = arcxcnn_bl_update_status,
> +};
> +
> +static int arcxcnn_backlight_register(struct arcxcnn *lp)
> +{
> + struct backlight_properties *props;
> + const char *name = lp->pdata->name ? : "arctic_bl";
> +
> + props = devm_kzalloc(lp->dev, sizeof(*props), GFP_KERNEL);
> + if (!props)
> + return -ENOMEM;
> +
> + props->type = BACKLIGHT_PLATFORM;
> + props->max_brightness = MAX_BRIGHTNESS;
> +
> + if (lp->pdata->initial_brightness > props->max_brightness)
> + lp->pdata->initial_brightness = props->max_brightness;
> +
> + props->brightness = lp->pdata->initial_brightness;
> +
> + lp->bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
> + &arcxcnn_bl_ops, props);
> + return PTR_ERR_OR_ZERO(lp->bl);
> +}
> +
> +static void arcxcnn_parse_dt(struct arcxcnn *lp)
> +{
> + struct device *dev = lp->dev;
> + struct device_node *node = dev->of_node;
> + u32 prog_val, num_entry, entry, sources[ARCXCNN_LEDEN_BITS];
> + int ret;
> +
> + /* device tree entry isn't required, defaults are OK */
> + if (!node)
> + return;
> +
> + ret = of_property_read_string(node, "label", &lp->pdata->name);
> + if (ret < 0)
> + lp->pdata->name = NULL;
> +
> + ret = of_property_read_u32(node, "default-brightness", &prog_val);
> + if (ret == 0)
> + lp->pdata->initial_brightness = prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,led-config-0", &prog_val);
> + if (ret == 0)
> + lp->pdata->led_config_0 = (u8)prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,led-config-1", &prog_val);
> + if (ret == 0)
> + lp->pdata->led_config_1 = (u8)prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,dim-freq", &prog_val);
> + if (ret == 0)
> + lp->pdata->dim_freq = (u8)prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,comp-config", &prog_val);
> + if (ret == 0)
> + lp->pdata->comp_config = (u8)prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,filter-config", &prog_val);
> + if (ret == 0)
> + lp->pdata->filter_config = (u8)prog_val;
> +
> + ret = of_property_read_u32(node, "arctic,trim-config", &prog_val);
> + if (ret == 0)
> + lp->pdata->trim_config = (u8)prog_val;
> +
> + ret = of_property_count_u32_elems(node, "led-sources");
> + if (ret < 0) {
> + lp->pdata->leden = ARCXCNN_LEDEN_MASK; /* all on is default */
> + } else {
> + num_entry = ret;
> + if (num_entry > ARCXCNN_LEDEN_BITS)
> + num_entry = ARCXCNN_LEDEN_BITS;
> +
> + ret = of_property_read_u32_array(node, "led-sources", sources,
> + num_entry);
> + if (ret < 0) {
> + dev_err(dev, "led-sources node is invalid.\n");
> + return;
> + }
> +
> + lp->pdata->leden = 0;
> +
> + /* for each enable in source, set bit in led enable */
> + for (entry = 0; entry < num_entry; entry++) {
> + u8 onbit = 1 << sources[entry];
> +
> + lp->pdata->leden |= onbit;
> + }
> + }
> +}
> +
> +static int arcxcnn_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> +{
> + struct arcxcnn *lp;
> + int ret;
> +
> + if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> + return -EIO;
> +
> + lp = devm_kzalloc(&cl->dev, sizeof(*lp), GFP_KERNEL);
> + if (!lp)
> + return -ENOMEM;
> +
> + lp->client = cl;
> + lp->dev = &cl->dev;
> + lp->pdata = dev_get_platdata(&cl->dev);
> +
> + /* reset the device */
> + ret = i2c_smbus_write_byte_data(lp->client,
> + ARCXCNN_CMD, ARCXCNN_CMD_RESET);
> + if (ret)
> + goto probe_err;
> +
> + if (!lp->pdata) {
> + lp->pdata = devm_kzalloc(lp->dev,
> + sizeof(*lp->pdata), GFP_KERNEL);
> + if (!lp->pdata)
> + return -ENOMEM;
> +
> + /* Setup defaults based on power-on defaults */
> + lp->pdata->name = NULL;
> + lp->pdata->initial_brightness = INIT_BRIGHT;
> + lp->pdata->leden = ARCXCNN_LEDEN_MASK;
> +
> + lp->pdata->led_config_0 = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_FADECTRL);
> +
> + lp->pdata->led_config_1 = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_ILED_CONFIG);
> + /* insure dim mode is not default pwm */
> + lp->pdata->led_config_1 |= ARCXCNN_ILED_DIM_INT;
> +
> + lp->pdata->dim_freq = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_DIMFREQ);
> +
> + lp->pdata->comp_config = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_COMP_CONFIG);
> +
> + lp->pdata->filter_config = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_FILT_CONFIG);
> +
> + lp->pdata->trim_config = i2c_smbus_read_byte_data(
> + lp->client, ARCXCNN_IMAXTUNE);
> +
> + if (IS_ENABLED(CONFIG_OF))
> + arcxcnn_parse_dt(lp);
> + }
> +
> + i2c_set_clientdata(cl, lp);
> +
> + /* constrain settings to what is possible */
> + if (lp->pdata->initial_brightness > MAX_BRIGHTNESS)
> + lp->pdata->initial_brightness = MAX_BRIGHTNESS;
> +
> + /* set initial brightness */
> + ret = arcxcnn_set_brightness(lp, lp->pdata->initial_brightness);
> + if (ret)
> + goto probe_err;
> +
> + /* set other register values directly */
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FADECTRL,
> + lp->pdata->led_config_0);
> + if (ret)
> + goto probe_err;
> +
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_ILED_CONFIG,
> + lp->pdata->led_config_1);
> + if (ret)
> + goto probe_err;
> +
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_DIMFREQ,
> + lp->pdata->dim_freq);
> + if (ret)
> + goto probe_err;
> +
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_COMP_CONFIG,
> + lp->pdata->comp_config);
> + if (ret)
> + goto probe_err;
> +
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FILT_CONFIG,
> + lp->pdata->filter_config);
> + if (ret)
> + goto probe_err;
> +
> + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_IMAXTUNE,
> + lp->pdata->trim_config);
> + if (ret)
> + goto probe_err;
> +
> + /* set initial LED Enables */
> + arcxcnn_update_field(lp, ARCXCNN_LEDEN,
> + ARCXCNN_LEDEN_MASK, lp->pdata->leden);
> +
> + ret = arcxcnn_backlight_register(lp);
> + if (ret)
> + goto probe_register_err;
> +
> + backlight_update_status(lp->bl);
> +
> + return 0;
> +
> +probe_register_err:
> + dev_err(lp->dev,
> + "failed to register backlight.\n");
> +
> +probe_err:
> + dev_err(lp->dev,
> + "failure ret: %d\n", ret);
> + return ret;
> +}
> +
> +static int arcxcnn_remove(struct i2c_client *cl)
> +{
> + struct arcxcnn *lp = i2c_get_clientdata(cl);
> +
> + /* disable all strings (ignore errors) */
> + i2c_smbus_write_byte_data(lp->client,
> + ARCXCNN_LEDEN, 0x00);
> + /* reset the device (ignore errors) */
> + i2c_smbus_write_byte_data(lp->client,
> + ARCXCNN_CMD, ARCXCNN_CMD_RESET);
> +
> + lp->bl->props.brightness = 0;
> +
> + backlight_update_status(lp->bl);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id arcxcnn_dt_ids[] = {
> + { .compatible = "arctic,arc2c0608" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, arcxcnn_dt_ids);
> +
> +static const struct i2c_device_id arcxcnn_ids[] = {
> + {"arc2c0608", ARC2C0608},
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, arcxcnn_ids);
> +
> +static struct i2c_driver arcxcnn_driver = {
> + .driver = {
> + .name = "arcxcnn_bl",
> + .of_match_table = of_match_ptr(arcxcnn_dt_ids),
> + },
> + .probe = arcxcnn_probe,
> + .remove = arcxcnn_remove,
> + .id_table = arcxcnn_ids,
> +};
> +module_i2c_driver(arcxcnn_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Brian Dodge <bdodge@arcticsand.com>");
> +MODULE_DESCRIPTION("ARCXCNN Backlight driver");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand
2017-05-03 15:04 ` [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand Olimpiu Dejeu
@ 2017-05-05 7:57 ` Lee Jones
0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2017-05-05 7:57 UTC (permalink / raw)
To: Olimpiu Dejeu
Cc: robh, linux-kernel, linux-fbdev, devicetree, jingoohan1, bdodge,
joe, daniel.thompson, lkp, fengguang.wu
On Wed, 03 May 2017, Olimpiu Dejeu wrote:
> backlight: Add devicetree bindings for the Arctic Sand backlight driver
> This patch provides devicetree bindings for the Arctic Sand
> driver submitted in the previous patch
> Acked-by: Rob Herring <robh@kernel.org>
> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
> Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
Same points as I made in [PATCH 3/3]
> ---
> v9 => v10:
> - Per Rob Herring's request changed vendor-prefix to arctic
> v8 => v9:
> - Version updated to match other patch in set. No other changes.
> v7 => v8:
> - Version updated to match other patch in set. No other changes.
> v6 => v7:
> - Version updated to match other patch in set. No other changes.
> v5 => v6:
> - Version updated to match other patch in set. No other changes.
> v4 => v5:
> - Added spaces for increased readability per Lee Jones
> v3 => v4:
> - Added spaces for increased readability per Lee Jones
> v2 => v3:
> - Version updated to match other patch in set. No other changes.
> v1 => v2:
> - Version updated to match other patch in set. No other changes.
>
> .../bindings/leds/backlight/arcxcnn_bl.txt | 33 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> new file mode 100644
> index 0000000..ecb7731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> @@ -0,0 +1,33 @@
> +Binding for ArcticSand arc2c0608 LED driver
> +
> +Required properties:
> +- compatible: should be "arctic,arc2c0608"
> +- reg: slave address
> +
> +Optional properties:
> +- default-brightness: brightness value on boot, value from: 0-4095
> +- label: The name of the backlight device
> + See Documentation/devicetree/bindings/leds/common.txt
> +- led-sources: List of enabled channels from 0 to 5.
> + See Documentation/devicetree/bindings/leds/common.txt
> +
> +- arctic,led-config-0: setting for register ILED_CONFIG_0
> +- arctic,led-config-1: setting for register ILED_CONFIG_1
> +- arctic,dim-freq: PWM mode frequence setting (bits [3:0] used)
> +- arctic,comp-config: setting for register CONFIG_COMP
> +- arctic,filter-config: setting for register FILTER_CONFIG
> +- arctic,trim-config: setting for register IMAXTUNE
> +
> +Note: Optional properties not specified will default to values in IC EPROM
> +
> +Example:
> +
> +arc2c0608@30 {
> + compatible = "arctic,arc2c0608";
> + reg = <0x30>;
> + default-brightness = <500>;
> + label = "lcd-backlight";
> + linux,default-trigger = "backlight";
> + led-sources = <0 1 2 5>;
> +};
> +
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices
2017-05-05 7:57 ` Lee Jones
@ 2017-05-05 17:06 ` Olimpiu Dejeu
2017-05-08 14:30 ` Lee Jones
0 siblings, 1 reply; 8+ messages in thread
From: Olimpiu Dejeu @ 2017-05-05 17:06 UTC (permalink / raw)
To: 'Lee Jones'
Cc: robh, linux-kernel, linux-fbdev, devicetree, jingoohan1,
Brian Dodge, joe, daniel.thompson, lkp, fengguang.wu
>> backlight: Add support for Arctic Sand LED backlight driver chips
>This should be the subject line of the patch.
>Out of interest, how are you submitting your patches?
>If you're not already, you should be using:
> `git format-patch ...`
> `git send-email ...`
>> This driver provides support for the Arctic Sand arc2c0608 chip,
>> and provides a framework to support future devices.
>'\n' here.
>> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
>> Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
>Biggest point however is that this patch is already in Mainline.
The only reason for this set of patches is based on the request from Rob Herring for vendor name change from 'arc' to 'arctic'. Not sure how to proceed, please advise.
>> ---
>> v9 => v10:
>> - Per Rob Herring's request changed vendor-prefix to arctic
>> v8 => v9:
>> - Addressing kbuild test robot WARNING: PTR_ERR_OR_ZERO can be used
>> v7 => v8:
>> - Version updated to match other patch in set. No other changes.
>> v6 => v7:
>> - Addressing issues brought up by Daniel Thompson
>> v5 => v6:
>> - Addressing issues brought up by Daniel Thompson
>> v4 => v5:
>> - Code style changes per Joe Perches and Jingoo Han
>> v3 => v4:
>> - Code style changes per Joe Perches and Jingoo Han
>> v2 => v3:
>> - Renamed variables to comply with conventions on naming
>> - Corrected device name in arcxcnn.h
>> v1 => v2:
>> - Removed "magic numbers" to initialize registers
>> - Cleaned up device tree bindings
>> - Fixed code style to address comments and pass "checkpatch"
>> - Removed unneeded debug and testing code
>>
>>
>> drivers/video/backlight/Kconfig | 7 +
>> drivers/video/backlight/Makefile | 1 +
>> drivers/video/backlight/arcxcnn_bl.c | 419
>> +++++++++++++++++++++++++++++++++++
>> 3 files changed, 427 insertions(+)
>> create mode 100644 drivers/video/backlight/arcxcnn_bl.c
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices
2017-05-05 17:06 ` Olimpiu Dejeu
@ 2017-05-08 14:30 ` Lee Jones
0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2017-05-08 14:30 UTC (permalink / raw)
To: Olimpiu Dejeu
Cc: robh, linux-kernel, linux-fbdev, devicetree, jingoohan1,
Brian Dodge, joe, daniel.thompson, lkp, fengguang.wu
On Fri, 05 May 2017, Olimpiu Dejeu wrote:
> >> backlight: Add support for Arctic Sand LED backlight driver chips
>
> >This should be the subject line of the patch.
>
> >Out of interest, how are you submitting your patches?
>
> >If you're not already, you should be using:
>
> > `git format-patch ...`
> > `git send-email ...`
>
> >> This driver provides support for the Arctic Sand arc2c0608 chip,
> >> and provides a framework to support future devices.
>
> >'\n' here.
>
> >> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
> >> Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
>
> >Biggest point however is that this patch is already in Mainline.
>
> The only reason for this set of patches is based on the request from Rob Herring for vendor name change from 'arc' to 'arctic'. Not sure how to proceed, please advise.
You need to only re-send the patches which have not been accepted
already. So fix the comments I gave you on the vendor name patch and
only re-send that one.
> >> ---
> >> v9 => v10:
> >> - Per Rob Herring's request changed vendor-prefix to arctic
> >> v8 => v9:
> >> - Addressing kbuild test robot WARNING: PTR_ERR_OR_ZERO can be used
> >> v7 => v8:
> >> - Version updated to match other patch in set. No other changes.
> >> v6 => v7:
> >> - Addressing issues brought up by Daniel Thompson
> >> v5 => v6:
> >> - Addressing issues brought up by Daniel Thompson
> >> v4 => v5:
> >> - Code style changes per Joe Perches and Jingoo Han
> >> v3 => v4:
> >> - Code style changes per Joe Perches and Jingoo Han
> >> v2 => v3:
> >> - Renamed variables to comply with conventions on naming
> >> - Corrected device name in arcxcnn.h
> >> v1 => v2:
> >> - Removed "magic numbers" to initialize registers
> >> - Cleaned up device tree bindings
> >> - Fixed code style to address comments and pass "checkpatch"
> >> - Removed unneeded debug and testing code
> >>
> >>
> >> drivers/video/backlight/Kconfig | 7 +
> >> drivers/video/backlight/Makefile | 1 +
> >> drivers/video/backlight/arcxcnn_bl.c | 419
> >> +++++++++++++++++++++++++++++++++++
> >> 3 files changed, 427 insertions(+)
> >> create mode 100644 drivers/video/backlight/arcxcnn_bl.c
> >>
>
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-05-08 14:31 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-03 15:04 [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Olimpiu Dejeu
2017-05-03 15:04 ` [PATCH v10 2/3] backlight arcxcnn devicetree bindings for ArcticSand Olimpiu Dejeu
2017-05-05 7:57 ` Lee Jones
2017-05-03 15:04 ` [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices Olimpiu Dejeu
2017-05-05 7:57 ` Lee Jones
2017-05-05 17:06 ` Olimpiu Dejeu
2017-05-08 14:30 ` Lee Jones
2017-05-05 7:54 ` [PATCH v10 1/3] backlight arcxcnn add arc to vendor prefix Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).