From: "Keiji Hayashibara" <hayashibara.keiji@socionext.com>
To: "'Masahiro Yamada'" <yamada.masahiro@socionext.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Russell King" <linux@armlinux.org.uk>,
devicetree@vger.kernel.org,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
"Masami Hiramatsu" <masami.hiramatsu@linaro.org>,
"Jassi Brar" <jaswinder.singh@linaro.org>,
"Hayashi, Kunihiko/林 邦彦" <hayashi.kunihiko@socionext.com>,
"Owada, Kiyoshi/大和田 清志" <owada.kiyoshi@socionext.com>
Subject: RE: [PATCH] arm: dts: uniphier: add efuse node for UniPhier 32bit SoC
Date: Tue, 12 Dec 2017 09:56:37 +0900 [thread overview]
Message-ID: <000101d372e4$10721be0$315653a0$@socionext.com> (raw)
In-Reply-To: <CAK7LNARmYfnYpACrUtYccBPyjnvXg0ymA=WZ=+nGAtanaXZk1w@mail.gmail.com>
Hello Yamada-san,
Sorry, I will be careful next time.
I was checking with the command of
"get_maintainer.pl -f arch/arm/boot/dts/".
Thank you.
Best Regards,
Keiji Hayashibara
> From: Masahiro Yamada [mailto:yamada.masahiro@socionext.com]
> Sent: Tuesday, December 12, 2017 1:06 AM
>
> 2017-12-04 17:12 GMT+09:00 Keiji Hayashibara <hayashibara.keiji@socionext.com>:
> > Add efuse node for UniPhier LD4, Pro4, sLD8, Pro5 and PXs2.
> > This efuse node is included in soc-glue.
> >
> > Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
> > ---
> > arch/arm/boot/dts/uniphier-ld4.dtsi | 18 ++++++++++++++++++
> > arch/arm/boot/dts/uniphier-pro4.dtsi | 23 +++++++++++++++++++++++
> > arch/arm/boot/dts/uniphier-pro5.dtsi | 33
> > +++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/uniphier-pxs2.dtsi | 18 ++++++++++++++++++
> > arch/arm/boot/dts/uniphier-sld8.dtsi | 18 ++++++++++++++++++
> > 5 files changed, 110 insertions(+)
>
>
> Applied to linux-uniphier,
> but please reconsider To: list next time.
>
> This patch was addressed to Rob and Mark, but they do not pick up platform DT patches.
>
>
> You do not need to get Rob's Ack for a patch like this.
>
>
> Binding is a contract between operation system and DT.
>
> The binding for this
> (Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt)
> was approved by Rob and merged in the mainline.
>
> Given that this patch follows the binding correctly, it should be safe.
>
> Thanks.
>
>
>
> > diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi
> > b/arch/arm/boot/dts/uniphier-ld4.dtsi
> > index 01fc3e1..6883f3b 100644
> > --- a/arch/arm/boot/dts/uniphier-ld4.dtsi
> > +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
> > @@ -273,6 +273,24 @@
> > };
> > };
> >
> > + soc-glue@5f900000 {
> > + compatible = "socionext,uniphier-ld4-soc-glue-debug",
> > + "simple-mfd";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x5f900000 0x2000>;
> > +
> > + efuse@100 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x100 0x28>;
> > + };
> > +
> > + efuse@130 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x130 0x8>;
> > + };
> > + };
> > +
> > timer@60000200 {
> > compatible = "arm,cortex-a9-global-timer";
> > reg = <0x60000200 0x20>; diff --git
> > a/arch/arm/boot/dts/uniphier-pro4.dtsi
> > b/arch/arm/boot/dts/uniphier-pro4.dtsi
> > index 7955c3a..150726b 100644
> > --- a/arch/arm/boot/dts/uniphier-pro4.dtsi
> > +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
> > @@ -294,6 +294,29 @@
> > };
> > };
> >
> > + soc-glue@5f900000 {
> > + compatible = "socionext,uniphier-pro4-soc-glue-debug",
> > + "simple-mfd";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x5f900000 0x2000>;
> > +
> > + efuse@100 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x100 0x28>;
> > + };
> > +
> > + efuse@130 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x130 0x8>;
> > + };
> > +
> > + efuse@200 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x200 0x14>;
> > + };
> > + };
> > +
> > aidet: aidet@5fc20000 {
> > compatible = "socionext,uniphier-pro4-aidet";
> > reg = <0x5fc20000 0x200>; diff --git
> > a/arch/arm/boot/dts/uniphier-pro5.dtsi
> > b/arch/arm/boot/dts/uniphier-pro5.dtsi
> > index 6589b8a..f291dd6 100644
> > --- a/arch/arm/boot/dts/uniphier-pro5.dtsi
> > +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
> > @@ -355,6 +355,39 @@
> > };
> > };
> >
> > + soc-glue@5f900000 {
> > + compatible = "socionext,uniphier-pro5-soc-glue-debug",
> > + "simple-mfd";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x5f900000 0x2000>;
> > +
> > + efuse@100 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x100 0x28>;
> > + };
> > +
> > + efuse@130 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x130 0x8>;
> > + };
> > +
> > + efuse@200 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x200 0x28>;
> > + };
> > +
> > + efuse@300 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x300 0x14>;
> > + };
> > +
> > + efuse@400 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x400 0x8>;
> > + };
> > + };
> > +
> > aidet: aidet@5fc20000 {
> > compatible = "socionext,uniphier-pro5-aidet";
> > reg = <0x5fc20000 0x200>; diff --git
> > a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> > b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> > index d82d6d8..8e54e87 100644
> > --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> > +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> > @@ -375,6 +375,24 @@
> > };
> > };
> >
> > + soc-glue@5f900000 {
> > + compatible = "socionext,uniphier-pxs2-soc-glue-debug",
> > + "simple-mfd";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x5f900000 0x2000>;
> > +
> > + efuse@100 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x100 0x28>;
> > + };
> > +
> > + efuse@200 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x200 0x58>;
> > + };
> > + };
> > +
> > aidet: aidet@5fc20000 {
> > compatible = "socionext,uniphier-pxs2-aidet";
> > reg = <0x5fc20000 0x200>; diff --git
> > a/arch/arm/boot/dts/uniphier-sld8.dtsi
> > b/arch/arm/boot/dts/uniphier-sld8.dtsi
> > index 7188536..afafe7c 100644
> > --- a/arch/arm/boot/dts/uniphier-sld8.dtsi
> > +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
> > @@ -277,6 +277,24 @@
> > };
> > };
> >
> > + soc-glue@5f900000 {
> > + compatible = "socionext,uniphier-sld8-soc-glue-debug",
> > + "simple-mfd";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x5f900000 0x2000>;
> > +
> > + efuse@100 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x100 0x28>;
> > + };
> > +
> > + efuse@200 {
> > + compatible = "socionext,uniphier-efuse";
> > + reg = <0x200 0x14>;
> > + };
> > + };
> > +
> > timer@60000200 {
> > compatible = "arm,cortex-a9-global-timer";
> > reg = <0x60000200 0x20>;
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree"
> > in the body of a message to majordomo@vger.kernel.org More majordomo
> > info at http://vger.kernel.org/majordomo-info.html
>
>
>
> --
> Best Regards
> Masahiro Yamada
prev parent reply other threads:[~2017-12-12 0:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 8:12 [PATCH] arm: dts: uniphier: add efuse node for UniPhier 32bit SoC Keiji Hayashibara
2017-12-11 16:05 ` Masahiro Yamada
2017-12-12 0:56 ` Keiji Hayashibara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000101d372e4$10721be0$315653a0$@socionext.com' \
--to=hayashibara.keiji@socionext.com \
--cc=devicetree@vger.kernel.org \
--cc=hayashi.kunihiko@socionext.com \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=owada.kiyoshi@socionext.com \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).