From: Keiji Hayashibara <hayashibara.keiji@socionext.com>
To: robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux@armlinux.org.uk, yamada.masahiro@socionext.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, masami.hiramatsu@linaro.org,
jaswinder.singh@linaro.org, hayashi.kunihiko@socionext.com,
owada.kiyoshi@socionext.com,
Keiji Hayashibara <hayashibara.keiji@socionext.com>
Subject: [PATCH] arm: dts: uniphier: add efuse node for UniPhier 32bit SoC
Date: Mon, 4 Dec 2017 17:12:10 +0900 [thread overview]
Message-ID: <1512375130-16860-1-git-send-email-hayashibara.keiji@socionext.com> (raw)
Add efuse node for UniPhier LD4, Pro4, sLD8, Pro5 and PXs2.
This efuse node is included in soc-glue.
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
---
arch/arm/boot/dts/uniphier-ld4.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/uniphier-pro4.dtsi | 23 +++++++++++++++++++++++
arch/arm/boot/dts/uniphier-pro5.dtsi | 33 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-pxs2.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/uniphier-sld8.dtsi | 18 ++++++++++++++++++
5 files changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 01fc3e1..6883f3b 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -273,6 +273,24 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-ld4-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@130 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x130 0x8>;
+ };
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 7955c3a..150726b 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -294,6 +294,29 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-pro4-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@130 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x130 0x8>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x14>;
+ };
+ };
+
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-pro4-aidet";
reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 6589b8a..f291dd6 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -355,6 +355,39 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-pro5-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@130 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x130 0x8>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x28>;
+ };
+
+ efuse@300 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x300 0x14>;
+ };
+
+ efuse@400 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x400 0x8>;
+ };
+ };
+
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-pro5-aidet";
reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index d82d6d8..8e54e87 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -375,6 +375,24 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x58>;
+ };
+ };
+
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-pxs2-aidet";
reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 7188536..afafe7c 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -277,6 +277,24 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-sld8-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x14>;
+ };
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
--
2.7.4
next reply other threads:[~2017-12-04 8:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 8:12 Keiji Hayashibara [this message]
2017-12-11 16:05 ` [PATCH] arm: dts: uniphier: add efuse node for UniPhier 32bit SoC Masahiro Yamada
2017-12-12 0:56 ` Keiji Hayashibara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512375130-16860-1-git-send-email-hayashibara.keiji@socionext.com \
--to=hayashibara.keiji@socionext.com \
--cc=devicetree@vger.kernel.org \
--cc=hayashi.kunihiko@socionext.com \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=owada.kiyoshi@socionext.com \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).