* IDE messages at boot
@ 2003-04-20 17:47 Paul Rolland
0 siblings, 0 replies; only message in thread
From: Paul Rolland @ 2003-04-20 17:47 UTC (permalink / raw)
To: linux-kernel
Hello,
At boot, probably while running hdparm to set specific parameters
for the IDE disks, I have the following messages :
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
DataRequest }
blk: queue c066f31c, I/O limit 4095mb (mask 0xffffffff)
hda: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting
hdb: set_drive_speed_status: status=0xd0 { Busy }
blk: queue c066f648, I/O limit 4095mb (mask 0xffffffff)
hdb: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting
Is this normal ?
Running again the same hdparm command line doesn't result in more
messages...
Regards,
Paul
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-20 17:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-20 17:47 IDE messages at boot Paul Rolland
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).