* [PATCH] Input: tsc2007 - switch to using input_set_capability()
@ 2017-02-17 22:56 Dmitry Torokhov
2017-02-18 14:58 ` H. Nikolaus Schaller
0 siblings, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2017-02-17 22:56 UTC (permalink / raw)
To: linux-input; +Cc: H. Nikolaus Schaller, Jonathan Cameron, linux-kernel
Do not manipulate evbit/keybit directly, use helper for that.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/tsc2007_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
index fdf81a2b989a..98dbefc3357d 100644
--- a/drivers/input/touchscreen/tsc2007_core.c
+++ b/drivers/input/touchscreen/tsc2007_core.c
@@ -364,8 +364,7 @@ static int tsc2007_probe(struct i2c_client *client,
input_set_drvdata(input_dev, ts);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
--
2.11.0.483.g087da7b7c-goog
--
Dmitry
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: tsc2007 - switch to using input_set_capability()
2017-02-17 22:56 [PATCH] Input: tsc2007 - switch to using input_set_capability() Dmitry Torokhov
@ 2017-02-18 14:58 ` H. Nikolaus Schaller
2017-02-20 1:10 ` Dmitry Torokhov
0 siblings, 1 reply; 4+ messages in thread
From: H. Nikolaus Schaller @ 2017-02-18 14:58 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Jonathan Cameron, LKML, Sebastian Reichel
Hi Dmitry,
> Am 17.02.2017 um 23:56 schrieb Dmitry Torokhov <dmitry.torokhov@gmail.com>:
>
> Do not manipulate evbit/keybit directly, use helper for that.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/tsc2007_core.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
> index fdf81a2b989a..98dbefc3357d 100644
> --- a/drivers/input/touchscreen/tsc2007_core.c
> +++ b/drivers/input/touchscreen/tsc2007_core.c
> @@ -364,8 +364,7 @@ static int tsc2007_probe(struct i2c_client *client,
>
> input_set_drvdata(input_dev, ts);
>
> - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
basically a good improvement, but removing the BIT_MASK(EV_ABS) makes problems
when replacing the next lines
>
> input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
> input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
by touchscreen_parse_properties() as done by my patch set.
The problem is that touchscreen_parse_properties() does not call input_set_abs_params()
but touchscreen_set_params(). This does not call some input_set_capability(dev, EV_ABS, axis)
but rather checks that it has been set before! Hence we only see warnings in the log
and no input event properties (BTN_TOUCH works but without position information).
So we either must explicitly input_set_capability(dev, EV_ABS, axis) for all three
axises or remove the test in touchscreen_set_params and call
input_set_capability(dev, EV_ABS, axis); in the end.
This patch improves the existing driver but breaks my tsc2007 patch set in a location
that my patch set does not even touch (touchscreen_set_params).
Scratching my head how to come out of this...
BR and thanks,
Nikolaus
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: tsc2007 - switch to using input_set_capability()
2017-02-18 14:58 ` H. Nikolaus Schaller
@ 2017-02-20 1:10 ` Dmitry Torokhov
2017-02-20 16:51 ` H. Nikolaus Schaller
0 siblings, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2017-02-20 1:10 UTC (permalink / raw)
To: H. Nikolaus Schaller
Cc: linux-input, Jonathan Cameron, LKML, Sebastian Reichel
On Sat, Feb 18, 2017 at 03:58:39PM +0100, H. Nikolaus Schaller wrote:
> Hi Dmitry,
>
> > Am 17.02.2017 um 23:56 schrieb Dmitry Torokhov <dmitry.torokhov@gmail.com>:
> >
> > Do not manipulate evbit/keybit directly, use helper for that.
> >
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > ---
> > drivers/input/touchscreen/tsc2007_core.c | 3 +--
> > 1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
> > index fdf81a2b989a..98dbefc3357d 100644
> > --- a/drivers/input/touchscreen/tsc2007_core.c
> > +++ b/drivers/input/touchscreen/tsc2007_core.c
> > @@ -364,8 +364,7 @@ static int tsc2007_probe(struct i2c_client *client,
> >
> > input_set_drvdata(input_dev, ts);
> >
> > - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> > - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> > + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
>
> basically a good improvement, but removing the BIT_MASK(EV_ABS) makes problems
> when replacing the next lines
>
> >
> > input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
> > input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
>
> by touchscreen_parse_properties() as done by my patch set.
>
> The problem is that touchscreen_parse_properties() does not call
> input_set_abs_params() but touchscreen_set_params(). This does not
> call some input_set_capability(dev, EV_ABS, axis) but rather checks
> that it has been set before! Hence we only see warnings in the log and
> no input event properties (BTN_TOUCH works but without position
> information).
Yes, the driver is supposed to set defaults, then OF data may augment
them (or it may omit them and leave driver's defaults). You should not
have removed calls to
input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
We may end up setting initial fuzz to 0, that's fine.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: tsc2007 - switch to using input_set_capability()
2017-02-20 1:10 ` Dmitry Torokhov
@ 2017-02-20 16:51 ` H. Nikolaus Schaller
0 siblings, 0 replies; 4+ messages in thread
From: H. Nikolaus Schaller @ 2017-02-20 16:51 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Jonathan Cameron, LKML, Sebastian Reichel
Hi Dmitry,
> Am 20.02.2017 um 02:10 schrieb Dmitry Torokhov <dmitry.torokhov@gmail.com>:
>
> On Sat, Feb 18, 2017 at 03:58:39PM +0100, H. Nikolaus Schaller wrote:
>> Hi Dmitry,
>>
>>> Am 17.02.2017 um 23:56 schrieb Dmitry Torokhov <dmitry.torokhov@gmail.com>:
>>>
>>> Do not manipulate evbit/keybit directly, use helper for that.
>>>
>>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>>> ---
>>> drivers/input/touchscreen/tsc2007_core.c | 3 +--
>>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
>>> index fdf81a2b989a..98dbefc3357d 100644
>>> --- a/drivers/input/touchscreen/tsc2007_core.c
>>> +++ b/drivers/input/touchscreen/tsc2007_core.c
>>> @@ -364,8 +364,7 @@ static int tsc2007_probe(struct i2c_client *client,
>>>
>>> input_set_drvdata(input_dev, ts);
>>>
>>> - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
>>> - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
>>> + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
>>
>> basically a good improvement, but removing the BIT_MASK(EV_ABS) makes problems
>> when replacing the next lines
>>
>>>
>>> input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
>>> input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
>>
>> by touchscreen_parse_properties() as done by my patch set.
>>
>> The problem is that touchscreen_parse_properties() does not call
>> input_set_abs_params() but touchscreen_set_params(). This does not
>> call some input_set_capability(dev, EV_ABS, axis) but rather checks
>> that it has been set before! Hence we only see warnings in the log and
>> no input event properties (BTN_TOUCH works but without position
>> information).
>
> Yes, the driver is supposed to set defaults, then OF data may augment
> them (or it may omit them and leave driver's defaults).
Ok.
> You should not
> have removed calls to
>
> input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
Wouldn't it suffice to call
input_set_capability(input_dev, EV_ABS, ABS_X);
input_set_capability(input_dev, EV_ABS, ABS_Y);
since fuzz default is already 0?
BR,
Nikolaus
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-02-20 16:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-17 22:56 [PATCH] Input: tsc2007 - switch to using input_set_capability() Dmitry Torokhov
2017-02-18 14:58 ` H. Nikolaus Schaller
2017-02-20 1:10 ` Dmitry Torokhov
2017-02-20 16:51 ` H. Nikolaus Schaller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).