From: "Katsuhiro Suzuki" <suzuki.katsuhiro@socionext.com>
To: "'Masahiro Yamada'" <yamada.masahiro@socionext.com>,
"Suzuki, Katsuhiro/鈴木 勝博" <suzuki.katsuhiro@socionext.com>
Cc: "Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
<linux-media@vger.kernel.org>,
"Masami Hiramatsu" <masami.hiramatsu@linaro.org>,
"Jassi Brar" <jaswinder.singh@linaro.org>,
"linux-arm-kernel" <linux-arm-kernel@lists.infradead.org>,
"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier HSC
Date: Mon, 4 Jun 2018 08:50:18 +0900 [thread overview]
Message-ID: <005c01d3fb95$a0b016f0$e21044d0$@socionext.com> (raw)
In-Reply-To: <CAK7LNAT3qOrH5PgidVKk73PeL97-VuySnkzSBDWUWqoD8ZwuyQ@mail.gmail.com>
Hello Yamada-san,
Thank you for your review and comments.
I'll fix this mail and other your replies!
Regards,
--
Katsuhiro Suzuki
> -----Original Message-----
> From: Masahiro Yamada <yamada.masahiro@socionext.com>
> Sent: Saturday, June 2, 2018 6:50 PM
> To: Suzuki, Katsuhiro/鈴木 勝博 <suzuki.katsuhiro@socionext.com>
> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>;
> linux-media@vger.kernel.org; Masami Hiramatsu <masami.hiramatsu@linaro.org>;
> Jassi Brar <jaswinder.singh@linaro.org>; linux-arm-kernel
> <linux-arm-kernel@lists.infradead.org>; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier
> HSC
>
> 2018-05-30 18:09 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>:
> > This patch adds DT binding documentation for UniPhier HSC which is
> > MPEG2-TS input/output and demux subsystem.
> >
> > Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
> > ---
> > .../bindings/media/uniphier,hsc.txt | 38 +++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/uniphier,hsc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> > new file mode 100644
> > index 000000000000..4242483b2ecc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> > @@ -0,0 +1,38 @@
> > +Socionext UniPhier HSC (High-speed Stream Controller)
> > +
> > +The Socionext UniPhier HSC subsystem consists of MPEG2-TS input/output and
> > +demultiplexer cores in the same register space.
> > +
> > +This interface is support TS serial signals (clock, valid, sync, data) from
> > +external demodulators.
> > +
> > +Required properties:
> > +- compatible : should be one of the following:
> > + "socionext,uniphier-ld11-hsc"
> > + "socionext,uniphier-ld20-hsc"
> > +- reg : offset and length of the register set for the device.
> > +- interrupts : should contain DMA and TSI error interrupt.
> > +- pinctrl-names : should be "default".
> > +- pinctrl-0 : defined TS serial signal pins for external demodulators.
> > +- clock-names : should include following entries:
>
>
> "the following entries:"
>
>
>
> > + "hsc", "stdmac"
> > +- clocks : a list of phandle, should contain an entry for each
> > + entry in clock-names.
> > +- reset-names : should include following entries:
>
>
> Ditto.
>
>
>
> > + "hsc", "stdmac"
> > +- resets : a list of phandle, should contain an entry for each
> > + entry in reset-names.
> > +
> > +Example:
> > + hsc {
> > + compatible = "socionext,uniphier-ld20-hsc";
> > + reg = <0x5c000000 0x100000>;
> > + interrupts = <0 100 4>, <0 101 4>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hscin2_s>,
> > + <&pinctrl_hscin3_s>;
> > + clock-names = "stdmac", "hsc";
> > + clocks = <&sys_clk 8>, <&sys_clk 9>;
> > + reset-names = "stdmac", "hsc";
> > + resets = <&sys_rst 8>, <&sys_rst 9>;
> > + };
> > --
> > 2.17.0
> >
>
>
>
> --
> Best Regards
> Masahiro Yamada
next prev parent reply other threads:[~2018-06-03 23:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-30 9:09 [PATCH 0/8] add UniPhier DVB Frontend system support Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier HSC Katsuhiro Suzuki
2018-06-02 8:00 ` Masahiro Yamada
2018-06-02 9:50 ` Masahiro Yamada
2018-06-03 23:50 ` Katsuhiro Suzuki [this message]
2018-05-30 9:09 ` [PATCH 2/8] media: uniphier: add headers of HSC MPEG2-TS I/O driver Katsuhiro Suzuki
2018-06-02 11:56 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 3/8] media: uniphier: add submodules " Katsuhiro Suzuki
2018-06-02 11:59 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 4/8] media: uniphier: add common module " Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 5/8] media: uniphier: add LD11/LD20 HSC support Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 6/8] media: uniphier: add common module of DVB adapter drivers Katsuhiro Suzuki
2018-06-02 11:59 ` Masahiro Yamada
2018-06-04 0:08 ` Katsuhiro Suzuki
2018-06-04 0:52 ` Masahiro Yamada
2018-06-04 1:54 ` Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 7/8] media: uniphier: add LD11 adapter driver for ISDB Katsuhiro Suzuki
2018-06-02 12:01 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 8/8] media: uniphier: add LD20 " Katsuhiro Suzuki
2018-06-02 12:03 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='005c01d3fb95$a0b016f0$e21044d0$@socionext.com' \
--to=suzuki.katsuhiro@socionext.com \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=masami.hiramatsu@linaro.org \
--cc=mchehab+samsung@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).