From: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
To: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
linux-media@vger.kernel.org
Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org>,
Jassi Brar <jaswinder.singh@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Subject: [PATCH 5/8] media: uniphier: add LD11/LD20 HSC support
Date: Wed, 30 May 2018 18:09:43 +0900 [thread overview]
Message-ID: <20180530090946.1635-6-suzuki.katsuhiro@socionext.com> (raw)
In-Reply-To: <20180530090946.1635-1-suzuki.katsuhiro@socionext.com>
This patch adds definition of registers specs to support of HSC
MPEG2-TS I/O driver for UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
drivers/media/platform/uniphier/Kconfig | 8 +
drivers/media/platform/uniphier/Makefile | 1 +
drivers/media/platform/uniphier/hsc-ld11.c | 219 +++++++++++++++++++++
3 files changed, 228 insertions(+)
create mode 100644 drivers/media/platform/uniphier/hsc-ld11.c
diff --git a/drivers/media/platform/uniphier/Kconfig b/drivers/media/platform/uniphier/Kconfig
index 1b4543ec1e3c..8f3a662a391c 100644
--- a/drivers/media/platform/uniphier/Kconfig
+++ b/drivers/media/platform/uniphier/Kconfig
@@ -7,3 +7,11 @@ config DVB_UNIPHIER
Driver for UniPhier frontend for MPEG2-TS input/output,
demux and descramble.
Say Y when you want to support this frontend.
+
+config DVB_UNIPHIER_LD11
+ bool "Support UniPhier LD11/LD20 HSC Device Driver"
+ depends on DVB_UNIPHIER
+ help
+ Driver for the HSC (High speed Stream Controller) for
+ UniPhier LD11/LD20.
+ Say Y when you want to support this hardware.
diff --git a/drivers/media/platform/uniphier/Makefile b/drivers/media/platform/uniphier/Makefile
index 88bc860b391f..0622f04d9e68 100644
--- a/drivers/media/platform/uniphier/Makefile
+++ b/drivers/media/platform/uniphier/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
uniphier-dvb-y += hsc-core.o hsc-ucode.o hsc-css.o hsc-ts.o hsc-dma.o
+uniphier-dvb-$(CONFIG_DVB_UNIPHIER_LD11) += hsc-ld11.o
obj-$(CONFIG_DVB_UNIPHIER) += uniphier-dvb.o
diff --git a/drivers/media/platform/uniphier/hsc-ld11.c b/drivers/media/platform/uniphier/hsc-ld11.c
new file mode 100644
index 000000000000..df3cc85ac525
--- /dev/null
+++ b/drivers/media/platform/uniphier/hsc-ld11.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Socionext UniPhier DVB driver for High-speed Stream Controller (HSC).
+// For UniPhier LD11/LD20.
+//
+// Copyright (c) 2018 Socionext Inc.
+
+#include "hsc.h"
+#include "hsc-reg.h"
+
+static const struct hsc_spec_init_ram uniphier_hsc_ld11_init_rams[] = {
+ { FLT_PATN_RAM_TOP_ADDR, FLT_PATN_RAM_SIZE, ~0, },
+ { FLT_MASK_RAM_TOP_ADDR, FLT_MASK_RAM_SIZE, 0, },
+ /* FLT_PID Pattern */
+ { SHARE_MEMORY_0_NORMAL, FLT_PIDPATTERN_SIZE, ~0, },
+ /* FLT_PID Table */
+ { SHARE_MEMORY_0_NORMAL + FLT_PIDPATTERN_SIZE,
+ SHARE_MEMORY_0_SIZE - FLT_PIDPATTERN_SIZE, 0, },
+ { SHARE_MEMORY_1_NORMAL, SHARE_MEMORY_1_SIZE, 0, },
+ { SHARE_MEMORY_2_NORMAL, SHARE_MEMORY_2_SIZE, 0, },
+ { SHARE_MEMORY_3_NORMAL, SHARE_MEMORY_3_SIZE, 0, },
+ { SHARE_MEMORY_4_NORMAL, SHARE_MEMORY_4_SIZE, 0, },
+ { SHARE_MEMORY_5_NORMAL, SHARE_MEMORY_5_SIZE, 0, },
+};
+
+static const struct hsc_spec_init_ram uniphier_hsc_ld20_init_rams[] = {
+ { FLT_PATN_RAM_TOP_ADDR, FLT_PATN_RAM_SIZE, ~0, },
+ { FLT_MASK_RAM_TOP_ADDR, FLT_MASK_RAM_SIZE, 0, },
+ /* FLT_PID Pattern */
+ { SHARE_MEMORY_0_NORMAL, FLT_PIDPATTERN_SIZE, ~0, },
+ /* FLT_PID Table */
+ { SHARE_MEMORY_0_NORMAL + FLT_PIDPATTERN_SIZE,
+ SHARE_MEMORY_0_SIZE - FLT_PIDPATTERN_SIZE, 0, },
+ { SHARE_MEMORY_1_NORMAL, SHARE_MEMORY_1_SIZE, 0, },
+ { SHARE_MEMORY_2_NORMAL, SHARE_MEMORY_2_SIZE, 0, },
+ { SHARE_MEMORY_3_NORMAL, SHARE_MEMORY_3_SIZE, 0, },
+ { SHARE_MEMORY_4_NORMAL, SHARE_MEMORY_4_SIZE, 0, },
+ { SHARE_MEMORY_5_NORMAL, SHARE_MEMORY_5_SIZE, 0, },
+ { SHARE_MEMORY_6_NORMAL, SHARE_MEMORY_6_SIZE, 0, },
+ { SHARE_MEMORY_7_NORMAL, SHARE_MEMORY_7_SIZE, 0, },
+};
+
+static const struct hsc_spec_css_in uniphier_hsc_ld11_css_in[] = {
+ [HSC_CSS_IN_SRLTS0] = {
+ .pol = { true, CSS_SIGNALPOLCH(0), -1, 3, 0, },
+ },
+ [HSC_CSS_IN_SRLTS1] = {
+ .pol = { true, CSS_SIGNALPOLCH(0), -1, 11, 8, },
+ },
+ [HSC_CSS_IN_SRLTS2] = {
+ .pol = { true, CSS_SIGNALPOLCH(0), -1, 19, 16, },
+ },
+ [HSC_CSS_IN_SRLTS3] = {
+ .pol = { true, CSS_SIGNALPOLCH(0), -1, 27, 24, },
+ },
+ [HSC_CSS_IN_SRLTS4] = {
+ .pol = { true, CSS_SIGNALPOLCH(1), -1, 3, 0, },
+ },
+ [HSC_CSS_IN_PARTS0] = {
+ .pol = { true, CSS_PTSISIGNALPOL, -1, -1, 0, },
+ },
+ [HSC_CSS_IN_PARTS1] = {
+ .pol = { true, CSS_PTSISIGNALPOL, -1, -1, 8, },
+ },
+ [HSC_CSS_IN_DMD0] = {
+ .pol = { true, CSS_DMDSIGNALPOL, -1, -1, 16, },
+ },
+};
+
+static const struct hsc_spec_css_out uniphier_hsc_ld11_css_out[] = {
+ [HSC_CSS_OUT_SRLTS0] = {
+ .pol = { true, CSS_STSOSIGNALPOL, 6, -1, 0, },
+ .sel = { true, CSS_OUTPUTCTRL(0), GENMASK(4, 0), },
+ },
+ [HSC_CSS_OUT_SRLTS1] = {
+ .pol = { true, CSS_STSOSIGNALPOL, 14, -1, 8, },
+ .sel = { true, CSS_OUTPUTCTRL(0), GENMASK(12, 8), },
+ },
+ [HSC_CSS_OUT_TSI0] = {
+ .sel = { true, CSS_OUTPUTCTRL(1), GENMASK(4, 0), },
+ },
+ [HSC_CSS_OUT_TSI1] = {
+ .sel = { true, CSS_OUTPUTCTRL(1), GENMASK(12, 8), },
+ },
+ [HSC_CSS_OUT_TSI2] = {
+ .sel = { true, CSS_OUTPUTCTRL(1), GENMASK(20, 16), },
+ },
+ [HSC_CSS_OUT_TSI3] = {
+ .sel = { true, CSS_OUTPUTCTRL(1), GENMASK(28, 24), },
+ },
+ [HSC_CSS_OUT_TSI4] = {
+ .sel = { true, CSS_OUTPUTCTRL(2), GENMASK(4, 0), },
+ },
+ [HSC_CSS_OUT_PARTS0] = {
+ .pol = { true, CSS_PTSOSIGNALPOL, -1, -1, 0, },
+ .sel = { true, CSS_OUTPUTCTRL(4), GENMASK(4, 0), },
+ },
+ [HSC_CSS_OUT_PKTFF0] = {
+ .sel = { true, CSS_OUTPUTCTRL(5), GENMASK(4, 0), },
+ },
+};
+
+static const struct hsc_spec_ts uniphier_hsc_ld11_ts_in[] = {
+ [HSC_TSI0] = {
+ .intr = { true, IOB_INTREN0, 13 },
+ },
+ [HSC_TSI1] = {
+ .intr = { true, IOB_INTREN0, 14 },
+ },
+ [HSC_TSI2] = {
+ .intr = { true, IOB_INTREN0, 15 },
+ },
+ [HSC_TSI3] = {
+ .intr = { true, IOB_INTREN0, 16 },
+ },
+ [HSC_TSI4] = {
+ .intr = { true, IOB_INTREN0, 17 },
+ },
+};
+
+static const struct hsc_spec_dma uniphier_hsc_ld11_dma_in[] = {
+ [HSC_DMA_IN0] = {
+ .dma_ch = 5,
+ .en = { true, CDMBC_TDSTRT, 5 },
+ .intr = { true, IOB_INTREN1, 1 },
+ },
+ [HSC_DMA_IN1] = {
+ .dma_ch = 6,
+ .en = { true, CDMBC_TDSTRT, 6 },
+ .intr = { true, IOB_INTREN1, 2 },
+ },
+ [HSC_DMA_IN2] = {
+ .dma_ch = 7,
+ .en = { true, CDMBC_TDSTRT, 7 },
+ .intr = { true, IOB_INTREN1, 3 },
+ },
+ [HSC_DMA_IN3] = {
+ .dma_ch = 22,
+ .en = { true, CDMBC_TDSTRT, 13 },
+ .intr = { true, IOB_INTREN1, 4 },
+ },
+ [HSC_DMA_IN4] = {
+ .dma_ch = 23,
+ .en = { true, CDMBC_TDSTRT, 14 },
+ .intr = { true, IOB_INTREN1, 5 },
+ },
+ [HSC_DMA_IN5] = {
+ .dma_ch = 24,
+ .en = { true, CDMBC_TDSTRT, 15 },
+ .intr = { true, IOB_INTREN1, 6 },
+ },
+};
+
+static const struct hsc_spec_dma uniphier_hsc_ld11_dma_out[] = {
+ [HSC_DMA_OUT0] = {
+ .dma_ch = 1,
+ .en = { true, CDMBC_TDSTRT, 1 },
+ .intr = { true, IOB_INTREN1, 13 },
+ },
+ [HSC_DMA_OUT1] = {
+ .dma_ch = 2,
+ .en = { true, CDMBC_TDSTRT, 2 },
+ .intr = { true, IOB_INTREN1, 14 },
+ },
+ [HSC_DMA_OUT2] = {
+ .dma_ch = 3,
+ .en = { true, CDMBC_TDSTRT, 3 },
+ .intr = { true, IOB_INTREN1, 15 },
+ },
+ [HSC_DMA_OUT3] = {
+ .dma_ch = 19,
+ .en = { true, CDMBC_TDSTRT, 9 },
+ .intr = { true, IOB_INTREN1, 16 },
+ },
+ [HSC_DMA_OUT4] = {
+ .dma_ch = 20,
+ .en = { true, CDMBC_TDSTRT, 10 },
+ .intr = { true, IOB_INTREN1, 17 },
+ },
+ [HSC_DMA_OUT5] = {
+ .dma_ch = 21,
+ .en = { true, CDMBC_TDSTRT, 11 },
+ .intr = { true, IOB_INTREN1, 18 },
+ },
+};
+
+const struct hsc_spec uniphier_hsc_ld11_spec = {
+ .ucode_spu = { "hsc_spu_code_ld11.bin", "hsc_spu_data_ld11.bin" },
+ .ucode_ace = { "hsc_ace_code_ld11.bin", "hsc_ace_data_ld11.bin" },
+ .init_rams = uniphier_hsc_ld11_init_rams,
+ .num_init_rams = ARRAY_SIZE(uniphier_hsc_ld11_init_rams),
+ .css_in = uniphier_hsc_ld11_css_in,
+ .num_css_in = ARRAY_SIZE(uniphier_hsc_ld11_css_in),
+ .css_out = uniphier_hsc_ld11_css_out,
+ .num_css_out = ARRAY_SIZE(uniphier_hsc_ld11_css_out),
+ .ts_in = uniphier_hsc_ld11_ts_in,
+ .num_ts_in = ARRAY_SIZE(uniphier_hsc_ld11_ts_in),
+ .dma_in = uniphier_hsc_ld11_dma_in,
+ .num_dma_in = ARRAY_SIZE(uniphier_hsc_ld11_dma_in),
+ .dma_out = uniphier_hsc_ld11_dma_out,
+ .num_dma_out = ARRAY_SIZE(uniphier_hsc_ld11_dma_out),
+};
+
+const struct hsc_spec uniphier_hsc_ld20_spec = {
+ .ucode_spu = { "hsc_spu_code_ld11.bin", "hsc_spu_data_ld11.bin" },
+ .ucode_ace = { "hsc_ace_code_ld11.bin", "hsc_ace_data_ld11.bin" },
+ .init_rams = uniphier_hsc_ld20_init_rams,
+ .num_init_rams = ARRAY_SIZE(uniphier_hsc_ld20_init_rams),
+ .css_in = uniphier_hsc_ld11_css_in,
+ .num_css_in = ARRAY_SIZE(uniphier_hsc_ld11_css_in),
+ .css_out = uniphier_hsc_ld11_css_out,
+ .num_css_out = ARRAY_SIZE(uniphier_hsc_ld11_css_out),
+ .ts_in = uniphier_hsc_ld11_ts_in,
+ .num_ts_in = ARRAY_SIZE(uniphier_hsc_ld11_ts_in),
+ .dma_in = uniphier_hsc_ld11_dma_in,
+ .num_dma_in = ARRAY_SIZE(uniphier_hsc_ld11_dma_in),
+ .dma_out = uniphier_hsc_ld11_dma_out,
+ .num_dma_out = ARRAY_SIZE(uniphier_hsc_ld11_dma_out),
+};
--
2.17.0
next prev parent reply other threads:[~2018-05-30 9:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-30 9:09 [PATCH 0/8] add UniPhier DVB Frontend system support Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier HSC Katsuhiro Suzuki
2018-06-02 8:00 ` Masahiro Yamada
2018-06-02 9:50 ` Masahiro Yamada
2018-06-03 23:50 ` Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 2/8] media: uniphier: add headers of HSC MPEG2-TS I/O driver Katsuhiro Suzuki
2018-06-02 11:56 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 3/8] media: uniphier: add submodules " Katsuhiro Suzuki
2018-06-02 11:59 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 4/8] media: uniphier: add common module " Katsuhiro Suzuki
2018-05-30 9:09 ` Katsuhiro Suzuki [this message]
2018-05-30 9:09 ` [PATCH 6/8] media: uniphier: add common module of DVB adapter drivers Katsuhiro Suzuki
2018-06-02 11:59 ` Masahiro Yamada
2018-06-04 0:08 ` Katsuhiro Suzuki
2018-06-04 0:52 ` Masahiro Yamada
2018-06-04 1:54 ` Katsuhiro Suzuki
2018-05-30 9:09 ` [PATCH 7/8] media: uniphier: add LD11 adapter driver for ISDB Katsuhiro Suzuki
2018-06-02 12:01 ` Masahiro Yamada
2018-05-30 9:09 ` [PATCH 8/8] media: uniphier: add LD20 " Katsuhiro Suzuki
2018-06-02 12:03 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180530090946.1635-6-suzuki.katsuhiro@socionext.com \
--to=suzuki.katsuhiro@socionext.com \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=masami.hiramatsu@linaro.org \
--cc=mchehab+samsung@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).