From: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
To: "Paul Nasrat" <pauln@truemesh.com>
Cc: "Andrew Morton" <akpm@osdl.org>, <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.0test3mm2 - Synaptics touchpad problem
Date: Fri, 15 Aug 2003 14:18:08 +0200 [thread overview]
Message-ID: <00d001c36327$4a6d7e70$401a71c3@izidor> (raw)
In-Reply-To: 20030815113940.GR13037@shitake.truemesh.com
[-- Attachment #1: Type: text/plain, Size: 3288 bytes --]
Hi,
here are logs with debug enabled - working and not working.
I think the most interesitng part from the notworking is this:
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [285]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [285]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [287]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [287]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [290]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [290]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [295]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [295]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [295]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [298]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [298]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [298]
<7>drivers/input/serio/i8042.c: fe <- i8042 (flush, aux) [300]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [300]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [300]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [303]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [303]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [308]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [308]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [308]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [311]
Full logs are attached.
Milan Roubal
----- Original Message -----
From: "Paul Nasrat" <pauln@truemesh.com>
To: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
Cc: "Andrew Morton" <akpm@osdl.org>; <linux-kernel@vger.kernel.org>
Sent: Friday, August 15, 2003 1:39 PM
Subject: Re: 2.6.0test3mm2 - Synaptics touchpad problem
> On Fri, Aug 15, 2003 at 01:00:09PM +0200, Milan Roubal wrote:
> > Hi,
> > I am using the new drivers for XFree86 and if the touchpad is visible
>
> Apologies I misread your bug report. Maybe this will be of more help.
>
> > in dmesg, than it is working in XFree86 too. When it isn't,
> > it isn't than listed in /proc/bus/input/devices and is not working in
> > XFree86.
>
> That does seem odd, I haven't noticed this with vanilla 2.6.0test3
> (linux only, but a reboot linux->linux would exhibit that).
>
> I note on the non synaptics boot you have this instead of the synaptics.
>
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
>
> It may be worth #define DEBUG in i8042.c, to see the differences between
> the two boot sequences in more detail.
>
> You might want to try against 2.6.0-test3, if it works for you
> then it might be worth going through the synaptics patches in mm2 one by
> one :(
>
>
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test3/2.6.0-test3-mm2/broken-out/
>
>
http://w1.894.telia.com/~u89404340/patches/touchpad/2.6.0-test2/v1/Readme.txt
>
> I'll see if I can replicate this with my laptop this evening.
>
> Paul
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
[-- Attachment #2: touchpad-debug-working --]
[-- Type: application/octet-stream, Size: 19248 bytes --]
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
: f6 -> i8042 (parameter) [209]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [211]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [211]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [211]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [214]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [214]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [214]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [216]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [216]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [216]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [219]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [219]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [219]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [221]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [221]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [221]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [224]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [224]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [224]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [227]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [227]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [227]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [229]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [229]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [229]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [232]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [232]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [232]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [234]
<7>drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, aux3, 12) [236]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [237]
<7>drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, aux3, 12) [238]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [238]
<7>drivers/input/serio/i8042.c: ff -> i8042 (parameter) [238]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [241]
<7>drivers/input/serio/i8042.c: aa <- i8042 (interrupt, aux3, 12) [630]
<7>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux3, 12) [632]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [632]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [632]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [634]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [634]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [634]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [637]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [637]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [637]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [639]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [639]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [639]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [642]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [642]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [642]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [645]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [645]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [645]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [647]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [647]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [647]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [650]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [650]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [650]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [652]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [652]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [652]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [655]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [655]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [655]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [657]
<7>drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, aux3, 12) [659]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [660]
<7>drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, aux3, 12) [661]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [661]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [661]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [664]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [664]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [664]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [666]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [666]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [666]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [669]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [669]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [669]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [671]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [671]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [671]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [674]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [674]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [674]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [677]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [677]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [677]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [679]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [679]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [679]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [682]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [682]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [682]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [684]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [684]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [684]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [687]
<7>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, aux3, 12) [688]
<7>drivers/input/serio/i8042.c: 44 <- i8042 (interrupt, aux3, 12) [689]
<7>drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, aux3, 12) [691]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [691]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [691]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [693]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [693]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [693]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [696]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [696]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [696]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [698]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [698]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [698]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [701]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [701]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [701]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [703]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [703]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [703]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [706]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [706]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [706]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [709]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [709]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [709]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [711]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [711]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [711]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [714]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [714]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [714]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [716]
<7>drivers/input/serio/i8042.c: 80 <- i8042 (interrupt, aux3, 12) [718]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [719]
<7>drivers/input/serio/i8042.c: 1b <- i8042 (interrupt, aux3, 12) [720]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [720]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [720]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [723]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [723]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [723]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [725]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [725]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [725]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [728]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [728]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [728]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [730]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [730]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [730]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [733]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [733]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [733]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [736]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [736]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [736]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [738]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [738]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [738]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [741]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [741]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [741]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [743]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [743]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [743]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [746]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [746]
<7>drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [746]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [748]
<6>Synaptics Touchpad, model: 1
<6> Firmware: 5.6
<6> 180 degree mounted touchpad
<6> Sensor: 18
<6> new absolute packet format
<6> Touchpad has extended capability bits
<6> -> four buttons
<6> -> multifinger detection
<6> -> palm detection
<6>input: Synaptics Synaptics TouchPad on isa0060/serio4
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [773]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [773]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [775]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [775]
<7>drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [775]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [778]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [778]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [778]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [781]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [781]
<7>drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [781]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [783]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [783]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [783]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [786]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [786]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [786]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [788]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [788]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [788]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [791]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [791]
<7>drivers/input/serio/i8042.c: ea -> i8042 (parameter) [791]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [793]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [793]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [793]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [796]
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [798]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [798]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [798]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [798]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [798]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [801]
<7>drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [801]
<7>drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, kbd, 1) [806]
<7>drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [806]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [809]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [809]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [812]
<7>drivers/input/serio/i8042.c: f8 -> i8042 (kbd-data) [812]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [815]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [815]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [818]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [818]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [820]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [820]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [823]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [823]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [826]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [826]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [829]
<7>drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, kbd, 1) [829]
<6>input: AT Set 2 keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>IPv4 over IPv4 tunneling driver
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cpufreq: No CPUs supporting ACPI performance management found.
<6>ACPI: (supports S0 S3 S4 S5)
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 348k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<4>reiserfs: checking transaction log (hda1) for (hda1)
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 172k freed
<6>Adding 514040k swap on /dev/hda6. Priority:42 extents:1
<6>NTFS driver 2.1.4 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [9397]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [10398]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13306]
<7>drivers/input/serio/i8042.c: f0 <- i8042 (interrupt, kbd, 1) [13398]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13403]
<4>blk: queue ddd79e00, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 15 16:06:48 2003
modprobe: FATAL: Module block_major_9 not found.
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
vgscan -- LVM driver/module not loaded?
Activating LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
modprobe: FATAL: Module char_major_109 not found.
vgchange -- LVM driver/module not loaded?
done
Activating swap-devices in /etc/fstab...
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 1536207/4141 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/sys on /sys type sysfs (rw)
/dev/hda3 on /windows type ntfs (ro,nosuid,nodev,nls=iso8859-2,umask=000)
doneActivating crypto devices using /etc/cryptotab ...
FATAL: Module loop_fish2 not found.
Please enter passphrase for /dev/hda5. failedLoading required kernel modules
doneSetting up IDE DMA mode
/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)
/dev/hdc:
setting using_dma to 1 (on)
using_dma = 1 (on)
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockmodprobe: FATAL: Module char_major_10_135 not found.
modprobe: FATAL: Module char_major_10_135 not found.
done
Setting up timezone datadone
Setting up hostname 'izidor'done
Setting up loopback interface done
Disabling IP forwardingdone
Creating /var/log/boot.msg
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
<notice>killproc: kill(30,29)
Running /etc/init.d/boot.local
/dev/hda:
setting 32-bit IO_support flag to 1
setting unmaskirq to 1 (on)
setting standby to 60 (5 minutes)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
/etc/init.d/boot.local: line 16: /proc/sys/dev/rtc/max-user-freq: No such file or directory
failed<notice>killproc: kill(30,3)
[-- Attachment #3: touchpad-debug-not-working --]
[-- Type: application/octet-stream, Size: 19273 bytes --]
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU#0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>Initializing RT netlink socket
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<4>BIO: pool of 256 setup, 15Kb (60 bytes/bio)
<4>biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
<4>biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
<4>biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
<4>biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
<4>biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
<4>biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
<6>ACPI: Subsystem revision 20030714
<4> tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
<4>Parsing all Control Methods:..................................................................................................................
<4>Table [DSDT](id F004) - 405 Objects with 39 Devices 114 Methods 12 Regions
<4>ACPI Namespace successfully loaded at root c0437c9c
<4>evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
<4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000008020 on int 11
<4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 0000000000008030 on int 11
<4>Completing Region/Field/Buffer/Package initialization:...........................................................................
<4>Initialized 12/12 Regions 5/5 Fields 33/33 Buffers 25/25 Packages (413 nodes)
<4>Executing all Device _STA and_INI methods:........................................
<4>40 Devices found containing: 40 _STA, 2 _INI methods
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 5, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10, disabled)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10, disabled)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
<6>ACPI: Embedded Controller [EC] (gpe 23)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<7>pnp: the driver 'system' has been registered
<5>SCSI subsystem initialized
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<3>PCI: Cannot allocate resource region 1 of device 0000:00:0a.0
<3>PCI: Cannot allocate resource region 0 of device 0000:00:02.6
<3>PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
<3>PCI: Cannot allocate resource region 1 of device 0000:00:0b.0
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xde809000, size 16384k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at cb45:0000
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<4>Console: switching to colour frame buffer device 128x48
<4>pty: 256 Unix98 ptys configured
<6>Machine check exception polling timer started.
<6>cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
<6>ikconfig 0.5 with /proc/ikconfig
<6>Initializing Cryptographic API
<6>ACPI: AC Adapter [ADP0] (on-line)
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>ACPI: Power Button (CM) [PWRB]
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: Lid Switch [LID]
<6>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
<6>ACPI: Thermal Zone [THM0] (52 C)
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>agpgart: Detected SiS 650 chipset
<6>agpgart: Maximum main memory to use for agp memory: 410M
<6>agpgart: AGP aperture is 64M @ 0xe8000000
<6>[drm] Initialized sis 1.0.0 20010503 on minor 0
<7>pnp: the driver 'parport_pc' has been registered
<6>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
<6>parport0: irq 7 detected
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>8139too Fast Ethernet driver 0.9.26
<7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xdf820000, 00:90:f5:01:45:45, IRQ 11
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 208
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
<6> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
<4>hda: TOSHIBA MK3018GAP, ATA DISK drive
<4>Using anticipatory scheduling elevator
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
<6> hda: hda1 hda2 < hda5 hda6 > hda3
<4>hdc: ATAPI 24X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>Console: switching to colour frame buffer device 128x48
<4>PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
<6>Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4201]
<4>Yenta IRQ list 02d8, PCI irq5
<4>Socket status: 30000006
<6>mice: PS/2 mouse device common for all mice
<7>drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (return) [0]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
<7>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [1]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [4]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [4]
<7>drivers/input/serio/i8042.c: 0f <- i8042 (return) [4]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
<7>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [7]
<7>drivers/input/serio/i8042.c: a9 <- i8042 (return) [7]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [9]
<7>drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [9]
<7>drivers/input/serio/i8042.c: ee <- i8042 (return) [9]
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [16]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [16]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [18]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [20]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [21]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [22]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [24]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [25]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [26]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [27]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [29]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [29]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [31]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [31]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [34]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [34]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [57]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [57]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [57]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [81]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [81]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [81]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [83]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [83]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [86]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [86]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [109]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [109]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [109]
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [114]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [114]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [117]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [117]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [119]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [119]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [143]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [143]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [143]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [166]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [166]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [166]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [169]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [169]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [171]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [171]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [195]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [195]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [195]
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [200]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [200]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [202]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [202]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [205]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [205]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [228]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [228]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [228]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [251]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [251]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [251]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [254]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [254]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [256]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [256]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [280]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [280]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [280]
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [285]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [285]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [287]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [287]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [290]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [290]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [295]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [295]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [295]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [298]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [298]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [298]
<7>drivers/input/serio/i8042.c: fe <- i8042 (flush, aux) [300]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [300]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [300]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [303]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [303]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [308]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [308]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [308]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [311]
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [315]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [315]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [317]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [317]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [320]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [324]
<7>drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [325]
<7>drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, kbd, 1) [329]
<7>drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [329]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [333]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [333]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [337]
<7>drivers/input/serio/i8042.c: f8 -> i8042 (kbd-data) [337]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [342]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [342]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [346]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [346]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [350]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [350]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [355]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [355]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [359]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [359]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [364]
<7>drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, kbd, 1) [366]
<6>input: AT Set 2 keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>IPv4 over IPv4 tunneling driver
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cpufreq: No CPUs supporting ACPI performance management found.
<6>ACPI: (supports S0 S3 S4 S5)
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 348k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<4>reiserfs: checking transaction log (hda1) for (hda1)
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 172k freed
<6>Adding 514040k swap on /dev/hda6. Priority:42 extents:1
<6>NTFS driver 2.1.4 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [9138]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [10141]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13488]
<7>drivers/input/serio/i8042.c: f0 <- i8042 (interrupt, kbd, 1) [13559]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13564]
<4>blk: queue ddd79e00, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 15 16:09:59 2003
modprobe: FATAL: Module block_major_9 not found.
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
vgscan -- LVM driver/module not loaded?
Activating LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
modprobe: FATAL: Module char_major_109 not found.
vgchange -- LVM driver/module not loaded?
done
Activating swap-devices in /etc/fstab...
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 1536207/4138 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/sys on /sys type sysfs (rw)
/dev/hda3 on /windows type ntfs (ro,nosuid,nodev,nls=iso8859-2,umask=000)
doneActivating crypto devices using /etc/cryptotab ...
FATAL: Module loop_fish2 not found.
Please enter passphrase for /dev/hda5. failedLoading required kernel modules
doneSetting up IDE DMA mode
/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)
/dev/hdc:
setting using_dma to 1 (on)
using_dma = 1 (on)
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockmodprobe: FATAL: Module char_major_10_135 not found.
modprobe: FATAL: Module char_major_10_135 not found.
done
Setting up timezone datadone
Setting up hostname 'izidor'done
Setting up loopback interface done
Disabling IP forwardingdone
Creating /var/log/boot.msg
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
<notice>killproc: kill(30,29)
Running /etc/init.d/boot.local
/dev/hda:
setting 32-bit IO_support flag to 1
setting unmaskirq to 1 (on)
setting standby to 60 (5 minutes)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
/etc/init.d/boot.local: line 16: /proc/sys/dev/rtc/max-user-freq: No such file or directory
failed<notice>killproc: kill(30,3)
next prev parent reply other threads:[~2003-08-15 12:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-15 9:25 2.6.0test3mm2 - Synaptics touchpad problem Milan Roubal
2003-08-15 10:35 ` Paul Nasrat
2003-08-15 11:00 ` Milan Roubal
2003-08-15 11:39 ` Paul Nasrat
2003-08-15 12:18 ` Milan Roubal [this message]
2003-08-15 13:28 ` Milan Roubal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00d001c36327$4a6d7e70$401a71c3@izidor' \
--to=roubm9am@barbora.ms.mff.cuni.cz \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pauln@truemesh.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).