* [PATCH v9 1/4] usb: typec: Add QCOM PMIC typec detection driver
[not found] <20200904082223.25563-1-wcheng@codeaurora.org>
@ 2020-09-04 8:22 ` Wesley Cheng
2020-09-04 8:22 ` [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Wesley Cheng @ 2020-09-04 8:22 UTC (permalink / raw)
To: sboyd, heikki.krogerus, gregkh, robh+dt, agross, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp,
sergei.shtylyov, Wesley Cheng
The QCOM SPMI typec driver handles the role and orientation detection, and
notifies client drivers using the USB role switch framework. It registers
as a typec port, so orientation can be communicated using the typec switch
APIs. The driver also attains a handle to the VBUS output regulator, so it
can enable/disable the VBUS source when acting as a host/device.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/usb/typec/Kconfig | 12 ++
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/qcom-pmic-typec.c | 262 ++++++++++++++++++++++++++++
3 files changed, 275 insertions(+)
create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 559dd06117e7..63789cf88fce 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -73,6 +73,18 @@ config TYPEC_TPS6598X
If you choose to build this driver as a dynamically linked module, the
module will be called tps6598x.ko.
+config TYPEC_QCOM_PMIC
+ tristate "Qualcomm PMIC USB Type-C driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ Driver for supporting role switch over the Qualcomm PMIC. This will
+ handle the USB Type-C role and orientation detection reported by the
+ QCOM PMIC if the PMIC has the capability to handle USB Type-C
+ detection.
+
+ It will also enable the VBUS output to connected devices when a
+ DFP connection is made.
+
source "drivers/usb/typec/mux/Kconfig"
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 7753a5c3cd46..cceffd987643 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
obj-$(CONFIG_TYPEC) += mux/
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
new file mode 100644
index 000000000000..9fc5e69d6e82
--- /dev/null
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+
+#define TYPEC_MISC_STATUS 0xb
+#define CC_ATTACHED BIT(0)
+#define CC_ORIENTATION BIT(1)
+#define SNK_SRC_MODE BIT(6)
+#define TYPEC_MODE_CFG 0x44
+#define TYPEC_DISABLE_CMD BIT(0)
+#define EN_SNK_ONLY BIT(1)
+#define EN_SRC_ONLY BIT(2)
+#define TYPEC_VCONN_CONTROL 0x46
+#define VCONN_EN_SRC BIT(0)
+#define VCONN_EN_VAL BIT(1)
+#define TYPEC_EXIT_STATE_CFG 0x50
+#define SEL_SRC_UPPER_REF BIT(2)
+#define TYPEC_INTR_EN_CFG_1 0x5e
+#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0)
+
+struct qcom_pmic_typec {
+ struct device *dev;
+ struct regmap *regmap;
+ u32 base;
+
+ struct typec_port *port;
+ struct usb_role_switch *role_sw;
+
+ struct regulator *vbus_reg;
+ bool vbus_enabled;
+};
+
+static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
+ *qcom_usb, bool enable)
+{
+ int ret;
+
+ if (enable == qcom_usb->vbus_enabled)
+ return;
+
+ if (enable) {
+ ret = regulator_enable(qcom_usb->vbus_reg);
+ if (ret)
+ return;
+ } else {
+ ret = regulator_disable(qcom_usb->vbus_reg);
+ if (ret)
+ return;
+ }
+ qcom_usb->vbus_enabled = enable;
+}
+
+static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
+{
+ enum typec_orientation orientation;
+ enum usb_role role;
+ unsigned int stat;
+ bool enable_vbus;
+
+ regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
+ &stat);
+
+ if (stat & CC_ATTACHED) {
+ orientation = (stat & CC_ORIENTATION) ?
+ TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL;
+ typec_set_orientation(qcom_usb->port, orientation);
+
+ role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+ if (role == USB_ROLE_HOST)
+ enable_vbus = true;
+ else
+ enable_vbus = false;
+ } else {
+ role = USB_ROLE_NONE;
+ enable_vbus = false;
+ }
+
+ qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
+ usb_role_switch_set_role(qcom_usb->role_sw, role);
+}
+
+static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
+{
+ struct qcom_pmic_typec *qcom_usb = _qcom_usb;
+
+ qcom_pmic_typec_check_connection(qcom_usb);
+ return IRQ_HANDLED;
+}
+
+static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb,
+ enum typec_port_type type)
+{
+ u8 mode = 0;
+
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_INTR_EN_CFG_1,
+ TYPEC_INTR_EN_CFG_1_MASK, 0);
+
+ if (type == TYPEC_PORT_SRC)
+ mode = EN_SRC_ONLY;
+ else if (type == TYPEC_PORT_SNK)
+ mode = EN_SNK_ONLY;
+
+ regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
+ EN_SNK_ONLY | EN_SRC_ONLY, mode);
+
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_VCONN_CONTROL,
+ VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_EXIT_STATE_CFG,
+ SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
+}
+
+static int qcom_pmic_typec_probe(struct platform_device *pdev)
+{
+ struct qcom_pmic_typec *qcom_usb;
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *fwnode;
+ struct typec_capability cap;
+ const char *buf;
+ int ret, irq, role;
+ u32 reg;
+
+ ret = device_property_read_u32(dev, "reg", ®);
+ if (ret < 0) {
+ dev_err(dev, "missing base address\n");
+ return ret;
+ }
+
+ qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
+ if (!qcom_usb)
+ return -ENOMEM;
+
+ qcom_usb->dev = dev;
+ qcom_usb->base = reg;
+
+ qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!qcom_usb->regmap) {
+ dev_err(dev, "Failed to get regmap\n");
+ return -EINVAL;
+ }
+
+ qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus");
+ if (IS_ERR(qcom_usb->vbus_reg))
+ return PTR_ERR(qcom_usb->vbus_reg);
+
+ fwnode = device_get_named_child_node(dev, "connector");
+ if (!fwnode)
+ return -EINVAL;
+
+ ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+ if (!ret) {
+ role = typec_find_port_power_role(buf);
+ if (role < 0)
+ role = TYPEC_PORT_SNK;
+ } else {
+ role = TYPEC_PORT_SNK;
+ }
+ cap.type = role;
+
+ ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+ if (!ret) {
+ role = typec_find_port_data_role(buf);
+ if (role < 0)
+ role = TYPEC_PORT_UFP;
+ } else {
+ role = TYPEC_PORT_UFP;
+ }
+ cap.data = role;
+
+ cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+ cap.fwnode = fwnode;
+ qcom_usb->port = typec_register_port(dev, &cap);
+ if (IS_ERR(qcom_usb->port)) {
+ ret = PTR_ERR(qcom_usb->port);
+ dev_err(dev, "Failed to register type c port %d\n", ret);
+ goto err_put_node;
+ }
+
+ qcom_usb->role_sw = fwnode_usb_role_switch_get(fwnode);
+ if (IS_ERR(qcom_usb->role_sw)) {
+ if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get role switch\n");
+ ret = PTR_ERR(qcom_usb->role_sw);
+ goto err_typec_port;
+ }
+ fwnode_handle_put(fwnode);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto err_usb_role_sw;
+
+ ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
+ qcom_pmic_typec_interrupt, IRQF_ONESHOT,
+ "qcom-pmic-typec", qcom_usb);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not request IRQ\n");
+ goto err_usb_role_sw;
+ }
+
+ platform_set_drvdata(pdev, qcom_usb);
+ qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type);
+ qcom_pmic_typec_check_connection(qcom_usb);
+
+ return 0;
+
+err_usb_role_sw:
+ usb_role_switch_put(qcom_usb->role_sw);
+err_typec_port:
+ typec_unregister_port(qcom_usb->port);
+err_put_node:
+ fwnode_handle_put(fwnode);
+
+ return ret;
+}
+
+static int qcom_pmic_typec_remove(struct platform_device *pdev)
+{
+ struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
+
+ usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+ qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
+
+ typec_unregister_port(qcom_usb->port);
+ usb_role_switch_put(qcom_usb->role_sw);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_pmic_typec_table[] = {
+ { .compatible = "qcom,pm8150b-usb-typec" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
+
+static struct platform_driver qcom_pmic_typec = {
+ .driver = {
+ .name = "qcom,pmic-typec",
+ .of_match_table = qcom_pmic_typec_table,
+ },
+ .probe = qcom_pmic_typec_probe,
+ .remove = qcom_pmic_typec_remove,
+};
+module_platform_driver(qcom_pmic_typec);
+
+MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
[not found] <20200904082223.25563-1-wcheng@codeaurora.org>
2020-09-04 8:22 ` [PATCH v9 1/4] usb: typec: Add QCOM PMIC typec detection driver Wesley Cheng
@ 2020-09-04 8:22 ` Wesley Cheng
2020-09-04 8:33 ` Sergei Shtylyov
2020-09-14 21:57 ` Rob Herring
2020-09-04 8:23 ` [PATCH v9 3/4] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block Wesley Cheng
2020-09-04 8:23 ` [PATCH v9 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster Wesley Cheng
3 siblings, 2 replies; 6+ messages in thread
From: Wesley Cheng @ 2020-09-04 8:22 UTC (permalink / raw)
To: sboyd, heikki.krogerus, gregkh, robh+dt, agross, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp,
sergei.shtylyov, Wesley Cheng
Introduce the dt-binding for enabling USB type C orientation and role
detection using the PM8150B. The driver will be responsible for receiving
the interrupt at a state change on the CC lines, reading the
orientation/role, and communicating this information to the remote
clients, which can include a role switch node and a type C switch.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
.../bindings/usb/qcom,pmic-typec.yaml | 108 ++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 000000000000..8582ab6a3cc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm PMIC based USB type C Detection Driver
+
+maintainers:
+ - Wesley Cheng <wcheng@codeaurora.org>
+
+description: |
+ Qualcomm PMIC Type C Detect
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8150b-usb-typec
+
+ reg:
+ maxItems: 1
+ description: Type C base address
+
+ interrupts:
+ maxItems: 1
+ description: CC change interrupt from PMIC
+
+ connector:
+ $ref: /connector/usb-connector.yaml#
+ description: Connector type for remote endpoints
+ type: object
+
+ properties:
+ compatible:
+ enum:
+ - usb-c-connector
+
+ power-role: true
+ data-role: true
+
+ ports:
+ description: Remote endpoint connections
+ type: object
+
+ properties:
+ port@1:
+ description: Remote endpoints for the Super Speed path
+ type: object
+
+ properties:
+ endpoint@0:
+ description: Connection to USB type C mux node
+ type: object
+
+ endpoint@1:
+ description: Connection to role switch node
+ type: object
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - connector
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pm8150b {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-usb-typec";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
+
+ connector {
+ compatible = "usb-c-connector";
+ power-role = "dual";
+ data-role = "dual";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb3_data_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&qmp_ss_mux>;
+ };
+ usb3_role: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dwc3_drd_switch>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v9 3/4] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block
[not found] <20200904082223.25563-1-wcheng@codeaurora.org>
2020-09-04 8:22 ` [PATCH v9 1/4] usb: typec: Add QCOM PMIC typec detection driver Wesley Cheng
2020-09-04 8:22 ` [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
@ 2020-09-04 8:23 ` Wesley Cheng
2020-09-04 8:23 ` [PATCH v9 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster Wesley Cheng
3 siblings, 0 replies; 6+ messages in thread
From: Wesley Cheng @ 2020-09-04 8:23 UTC (permalink / raw)
To: sboyd, heikki.krogerus, gregkh, robh+dt, agross, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp,
sergei.shtylyov, Wesley Cheng
The PM8150B has a dedicated USB type C block, which can be used for type C
orientation and role detection. Create the reference node to this type C
block for further use.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index e112e8876db6..053c659734a7 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -53,6 +53,13 @@ power-on@800 {
status = "disabled";
};
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-usb-typec";
+ status = "disabled";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
+ };
+
pm8150b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v9 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
[not found] <20200904082223.25563-1-wcheng@codeaurora.org>
` (2 preceding siblings ...)
2020-09-04 8:23 ` [PATCH v9 3/4] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block Wesley Cheng
@ 2020-09-04 8:23 ` Wesley Cheng
3 siblings, 0 replies; 6+ messages in thread
From: Wesley Cheng @ 2020-09-04 8:23 UTC (permalink / raw)
To: sboyd, heikki.krogerus, gregkh, robh+dt, agross, bjorn.andersson
Cc: linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp,
sergei.shtylyov, Wesley Cheng
Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B. This will provide the VBUS source to connected
peripherals.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 053c659734a7..b49caa63cd4c 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -53,6 +53,12 @@ power-on@800 {
status = "disabled";
};
+ pm8150b_vbus: regulator@1100 {
+ compatible = "qcom,pm8150b-vbus-reg";
+ status = "disabled";
+ reg = <0x1100>;
+ };
+
pm8150b_typec: typec@1500 {
compatible = "qcom,pm8150b-usb-typec";
status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 6c6325c3af59..ba3b5b802954 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -409,6 +409,10 @@ &ufs_mem_phy {
vdda-pll-max-microamp = <19000>;
};
+&pm8150b_vbus {
+ status = "okay";
+};
+
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vdd_usb_hs_core>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
2020-09-04 8:22 ` [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
@ 2020-09-04 8:33 ` Sergei Shtylyov
2020-09-14 21:57 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2020-09-04 8:33 UTC (permalink / raw)
To: Wesley Cheng, sboyd, heikki.krogerus, gregkh, robh+dt, agross,
bjorn.andersson
Cc: linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp
On 04.09.2020 11:22, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B. The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the
> orientation/role, and communicating this information to the remote
> clients, which can include a role switch node and a type C switch.
>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
> .../bindings/usb/qcom,pmic-typec.yaml | 108 ++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> new file mode 100644
> index 000000000000..8582ab6a3cc4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm PMIC based USB type C Detection Driver
> +
> +maintainers:
> + - Wesley Cheng <wcheng@codeaurora.org>
> +
> +description: |
> + Qualcomm PMIC Type C Detect
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pm8150b-usb-typec
> +
> + reg:
> + maxItems: 1
> + description: Type C base address
> +
> + interrupts:
> + maxItems: 1
> + description: CC change interrupt from PMIC
> +
> + connector:
> + $ref: /connector/usb-connector.yaml#
> + description: Connector type for remote endpoints
> + type: object
> +
> + properties:
> + compatible:
> + enum:
> + - usb-c-connector
> +
> + power-role: true
> + data-role: true
> +
> + ports:
> + description: Remote endpoint connections
> + type: object
> +
> + properties:
> + port@1:
> + description: Remote endpoints for the Super Speed path
> + type: object
> +
> + properties:
> + endpoint@0:
> + description: Connection to USB type C mux node
> + type: object
> +
> + endpoint@1:
> + description: Connection to role switch node
> + type: object
> +
> + required:
> + - compatible
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - connector
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + pm8150b {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pm8150b_typec: typec@1500 {
Shouldn't we call it "usb-typec@1500" for more clarity?
> + compatible = "qcom,pm8150b-usb-typec";
> + reg = <0x1500>;
> + interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
2020-09-04 8:22 ` [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
2020-09-04 8:33 ` Sergei Shtylyov
@ 2020-09-14 21:57 ` Rob Herring
1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-09-14 21:57 UTC (permalink / raw)
To: Wesley Cheng
Cc: sboyd, heikki.krogerus, gregkh, agross, bjorn.andersson,
linux-kernel, linux-arm-msm, devicetree, linux-usb, jackp,
sergei.shtylyov
On Fri, Sep 04, 2020 at 08:22:53AM +0000, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B. The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the
> orientation/role, and communicating this information to the remote
> clients, which can include a role switch node and a type C switch.
>
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
> .../bindings/usb/qcom,pmic-typec.yaml | 108 ++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
Please see this thread[1]. Looks like similar functions and hence the
bindings should be similar. There's a lot of USB Type C binding changes
in flight. I'm just going to reject them all if folks that know the
h/w and USB Type C better than me can't work together.
>
> diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> new file mode 100644
> index 000000000000..8582ab6a3cc4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm PMIC based USB type C Detection Driver
> +
> +maintainers:
> + - Wesley Cheng <wcheng@codeaurora.org>
> +
> +description: |
> + Qualcomm PMIC Type C Detect
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pm8150b-usb-typec
> +
> + reg:
> + maxItems: 1
> + description: Type C base address
> +
> + interrupts:
> + maxItems: 1
> + description: CC change interrupt from PMIC
> +
> + connector:
> + $ref: /connector/usb-connector.yaml#
> + description: Connector type for remote endpoints
> + type: object
> +
> + properties:
> + compatible:
> + enum:
> + - usb-c-connector
> +
> + power-role: true
> + data-role: true
> +
> + ports:
> + description: Remote endpoint connections
> + type: object
> +
> + properties:
> + port@1:
> + description: Remote endpoints for the Super Speed path
> + type: object
> +
> + properties:
> + endpoint@0:
> + description: Connection to USB type C mux node
> + type: object
> +
> + endpoint@1:
> + description: Connection to role switch node
> + type: object
Not sure about this. The connector SS signals are routed to a mux and
the above are the 2 choices?
Rob
[1] https://lore.kernel.org/linux-usb/TYBPR01MB53096D5A92B7AA149E5803D786260@TYBPR01MB5309.jpnprd01.prod.outlook.com/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-09-14 21:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200904082223.25563-1-wcheng@codeaurora.org>
2020-09-04 8:22 ` [PATCH v9 1/4] usb: typec: Add QCOM PMIC typec detection driver Wesley Cheng
2020-09-04 8:22 ` [PATCH v9 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
2020-09-04 8:33 ` Sergei Shtylyov
2020-09-14 21:57 ` Rob Herring
2020-09-04 8:23 ` [PATCH v9 3/4] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block Wesley Cheng
2020-09-04 8:23 ` [PATCH v9 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster Wesley Cheng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).