* HW ethernet address problems with 8139too and 2.4.9
@ 2001-08-30 9:25 Hans-Christian Armingeon
2001-08-30 10:17 ` Gerd Knorr
0 siblings, 1 reply; 3+ messages in thread
From: Hans-Christian Armingeon @ 2001-08-30 9:25 UTC (permalink / raw)
To: linux-kernel
Hi gurus,
I've got a problem with an Elitegroup K7AMA onboard rtl8139C LAN.
ifconfig shows me the hardware address ff:ff:ff:ff:ff:ff. So I'm not
able to get an tcp/ip connection. Under w2k professional everything works
fine.
Any suggestions?
Johnny
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: HW ethernet address problems with 8139too and 2.4.9
2001-08-30 9:25 HW ethernet address problems with 8139too and 2.4.9 Hans-Christian Armingeon
@ 2001-08-30 10:17 ` Gerd Knorr
2001-08-30 18:10 ` Hans-Christian Armingeon
0 siblings, 1 reply; 3+ messages in thread
From: Gerd Knorr @ 2001-08-30 10:17 UTC (permalink / raw)
To: linux-kernel
Hans-Christian Armingeon wrote:
> Hi gurus,
> I've got a problem with an Elitegroup K7AMA onboard rtl8139C LAN.
> ifconfig shows me the hardware address ff:ff:ff:ff:ff:ff. So I'm not
> able to get an tcp/ip connection. Under w2k professional everything works
> fine.
> Any suggestions?
The f*** rtl windows driver does that. You can do:
(1) stop booting windows
(2) ifconfig eth0 hw ether ... at a reasonable place in the boot
scripts
Gerd
--
Damn lot people confuse usability and eye-candy.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: HW ethernet address problems with 8139too and 2.4.9
2001-08-30 10:17 ` Gerd Knorr
@ 2001-08-30 18:10 ` Hans-Christian Armingeon
0 siblings, 0 replies; 3+ messages in thread
From: Hans-Christian Armingeon @ 2001-08-30 18:10 UTC (permalink / raw)
To: Gerd Knorr, linux-kernel
On Thursday, 30. August 2001 12:17, Gerd Knorr wrote:
> Hans-Christian Armingeon wrote:
> > Hi gurus,
> > I've got a problem with an Elitegroup K7AMA onboard rtl8139C LAN.
> > ifconfig shows me the hardware address ff:ff:ff:ff:ff:ff. So I'm not
> > able to get an tcp/ip connection. Under w2k professional everything
> > works fine.
> > Any suggestions?
>
> The f*** rtl windows driver does that. You can do:
I didn't run windows before that on the system, the processor was a "virgin"
>
> (1) stop booting windows
> (2) ifconfig eth0 hw ether ... at a reasonable place in the boot
> scripts
>
> Gerd
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-08-30 18:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-08-30 9:25 HW ethernet address problems with 8139too and 2.4.9 Hans-Christian Armingeon
2001-08-30 10:17 ` Gerd Knorr
2001-08-30 18:10 ` Hans-Christian Armingeon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).