* [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
@ 2021-10-12 7:55 tjiang
2021-10-18 7:49 ` tjiang
2021-10-19 19:29 ` Matthias Kaehlcke
0 siblings, 2 replies; 6+ messages in thread
From: tjiang @ 2021-10-12 7:55 UTC (permalink / raw)
To: marcel, johan.hedberg, luiz.dentz
Cc: linux-kernel, linux-bluetooth, linux-arm-msm, bgodavar, c-hbandi,
hemantg, mka, rjliao, zijuhu, tjiang
the RF performance of wcn6855 soc chip from different foundries will be
difference, so we should use different nvm to configure them.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
---
drivers/bluetooth/btusb.c | 56
+++++++++++++++++++++++++++++++++++------------
1 file changed, 42 insertions(+), 14 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 75c83768c257..f352ff351b61 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev
*hdev,
#define QCA_DFU_TIMEOUT 3000
#define QCA_FLAG_MULTI_NVM 0x80
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
struct qca_version {
__le32 rom_version;
__le32 patch_version;
@@ -3221,6 +3224,7 @@ static const struct qca_device_info
qca_devices_table[] = {
{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
};
static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
request,
@@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
hci_dev *hdev,
return err;
}
+static void btusb_generate_qca_nvm_name(char *fwname,
+ size_t max_size,
+ struct qca_version *ver)
+{
+ u32 rom_version = le32_to_cpu(ver->rom_version);
+ u16 flag = le16_to_cpu(ver->flag);
+
+ if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
+ u16 board_id = le16_to_cpu(ver->board_id);
+ u32 ram_version = le32_to_cpu(ver->ram_version);
+ const char *variant;
+
+ switch (ram_version) {
+ case WCN6855_2_0_RAM_VERSION_GF:
+ case WCN6855_2_1_RAM_VERSION_GF:
+ variant = "_gf";
+ break;
+ default:
+ variant = "";
+ break;
+ }
+
+ /* if boardid equal 0, use default nvm without suffix */
+ if (board_id == 0x0) {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
+ rom_version, variant);
+ } else {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
+ rom_version, variant, board_id);
+ }
+ } else {
+ snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
+ rom_version);
+ }
+
+}
+
static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
struct qca_version *ver,
const struct qca_device_info *info)
@@ -3383,20 +3424,7 @@ static int btusb_setup_qca_load_nvm(struct
hci_dev *hdev,
char fwname[64];
int err;
- if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
- /* if boardid equal 0, use default nvm without surfix */
- if (le16_to_cpu(ver->board_id) == 0x0) {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
- le32_to_cpu(ver->rom_version),
- le16_to_cpu(ver->board_id));
- }
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
- }
+ btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
err = request_firmware(&fw, fwname, &hdev->dev);
if (err) {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
2021-10-12 7:55 [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm tjiang
@ 2021-10-18 7:49 ` tjiang
2021-10-19 19:29 ` Matthias Kaehlcke
1 sibling, 0 replies; 6+ messages in thread
From: tjiang @ 2021-10-18 7:49 UTC (permalink / raw)
To: marcel, johan.hedberg, luiz.dentz
Cc: linux-kernel, linux-bluetooth, linux-arm-msm, bgodavar, c-hbandi,
hemantg, mka, rjliao, zijuhu
marcel:
sorry to disturb you , could you help review this patch ? thank you.
regards.
tim
On 2021-10-12 15:55, tjiang@codeaurora.org wrote:
> the RF performance of wcn6855 soc chip from different foundries will be
> difference, so we should use different nvm to configure them.
>
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
> drivers/bluetooth/btusb.c | 56
> +++++++++++++++++++++++++++++++++++------------
> 1 file changed, 42 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 75c83768c257..f352ff351b61 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct
> hci_dev *hdev,
> #define QCA_DFU_TIMEOUT 3000
> #define QCA_FLAG_MULTI_NVM 0x80
>
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
> struct qca_version {
> __le32 rom_version;
> __le32 patch_version;
> @@ -3221,6 +3224,7 @@ static const struct qca_device_info
> qca_devices_table[] = {
> { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> };
>
> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
> request,
> @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
> hci_dev *hdev,
> return err;
> }
>
> +static void btusb_generate_qca_nvm_name(char *fwname,
> + size_t max_size,
> + struct qca_version *ver)
> +{
> + u32 rom_version = le32_to_cpu(ver->rom_version);
> + u16 flag = le16_to_cpu(ver->flag);
> +
> + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> + u16 board_id = le16_to_cpu(ver->board_id);
> + u32 ram_version = le32_to_cpu(ver->ram_version);
> + const char *variant;
> +
> + switch (ram_version) {
> + case WCN6855_2_0_RAM_VERSION_GF:
> + case WCN6855_2_1_RAM_VERSION_GF:
> + variant = "_gf";
> + break;
> + default:
> + variant = "";
> + break;
> + }
> +
> + /* if boardid equal 0, use default nvm without suffix */
> + if (board_id == 0x0) {
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
> + rom_version, variant);
> + } else {
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
> + rom_version, variant, board_id);
> + }
> + } else {
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
> + rom_version);
> + }
> +
> +}
> +
> static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> struct qca_version *ver,
> const struct qca_device_info *info)
> @@ -3383,20 +3424,7 @@ static int btusb_setup_qca_load_nvm(struct
> hci_dev *hdev,
> char fwname[64];
> int err;
>
> - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> - /* if boardid equal 0, use default nvm without surfix */
> - if (le16_to_cpu(ver->board_id) == 0x0) {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> - le32_to_cpu(ver->rom_version),
> - le16_to_cpu(ver->board_id));
> - }
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> - }
> + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
>
> err = request_firmware(&fw, fwname, &hdev->dev);
> if (err) {
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
2021-10-12 7:55 [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm tjiang
2021-10-18 7:49 ` tjiang
@ 2021-10-19 19:29 ` Matthias Kaehlcke
2021-10-20 4:00 ` tjiang
1 sibling, 1 reply; 6+ messages in thread
From: Matthias Kaehlcke @ 2021-10-19 19:29 UTC (permalink / raw)
To: tjiang
Cc: marcel, johan.hedberg, luiz.dentz, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, rjliao, zijuhu
On Tue, Oct 12, 2021 at 03:55:56PM +0800, tjiang@codeaurora.org wrote:
> the RF performance of wcn6855 soc chip from different foundries will be
> difference, so we should use different nvm to configure them.
>
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
> drivers/bluetooth/btusb.c | 56
> +++++++++++++++++++++++++++++++++++------------
> 1 file changed, 42 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 75c83768c257..f352ff351b61 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev
> *hdev,
> #define QCA_DFU_TIMEOUT 3000
> #define QCA_FLAG_MULTI_NVM 0x80
>
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
> struct qca_version {
> __le32 rom_version;
> __le32 patch_version;
> @@ -3221,6 +3224,7 @@ static const struct qca_device_info
> qca_devices_table[] = {
> { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> };
>
> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
> @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
> hci_dev *hdev,
> return err;
> }
>
> +static void btusb_generate_qca_nvm_name(char *fwname,
> + size_t max_size,
> + struct qca_version *ver)
=> const struct qca_version *ver
> +{
> + u32 rom_version = le32_to_cpu(ver->rom_version);
> + u16 flag = le16_to_cpu(ver->flag);
> +
> + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> + u16 board_id = le16_to_cpu(ver->board_id);
> + u32 ram_version = le32_to_cpu(ver->ram_version);
> + const char *variant;
> +
> + switch (ram_version) {
> + case WCN6855_2_0_RAM_VERSION_GF:
> + case WCN6855_2_1_RAM_VERSION_GF:
> + variant = "_gf";
> + break;
> + default:
> + variant = "";
instead of the default branch you could assign a default to 'variant' at
declaration time, but it's fine either way.
> + break;
> + }
> +
> + /* if boardid equal 0, use default nvm without suffix */
delete the comment, it just states the obvious
> + if (board_id == 0x0) {
nit: is there really any value in using a hex number here instead of a
plain decimal 0?
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
> + rom_version, variant);
> + } else {
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
> + rom_version, variant, board_id);
> + }
> + } else {
> + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
> + rom_version);
> + }
> +
> +}
> +
> static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> struct qca_version *ver,
> const struct qca_device_info *info)
> @@ -3383,20 +3424,7 @@ static int btusb_setup_qca_load_nvm(struct hci_dev
> *hdev,
> char fwname[64];
> int err;
>
> - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> - /* if boardid equal 0, use default nvm without surfix */
> - if (le16_to_cpu(ver->board_id) == 0x0) {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> - le32_to_cpu(ver->rom_version),
> - le16_to_cpu(ver->board_id));
> - }
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> - }
> + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
>
> err = request_firmware(&fw, fwname, &hdev->dev);
> if (err) {
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
2021-10-19 19:29 ` Matthias Kaehlcke
@ 2021-10-20 4:00 ` tjiang
2021-10-20 15:30 ` Matthias Kaehlcke
0 siblings, 1 reply; 6+ messages in thread
From: tjiang @ 2021-10-20 4:00 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, luiz.dentz, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, rjliao, zijuhu
Thanks Matthias for the comments. please see my comments inline .
BTW: marcel , do you agree with Matthias comments ? if fine , I will
align Matthias comments and make the final version.
regards.
tim
On 2021-10-20 03:29, Matthias Kaehlcke wrote:
> On Tue, Oct 12, 2021 at 03:55:56PM +0800, tjiang@codeaurora.org wrote:
>> the RF performance of wcn6855 soc chip from different foundries will
>> be
>> difference, so we should use different nvm to configure them.
>>
>> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
>> ---
>> drivers/bluetooth/btusb.c | 56
>> +++++++++++++++++++++++++++++++++++------------
>> 1 file changed, 42 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 75c83768c257..f352ff351b61 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct
>> hci_dev
>> *hdev,
>> #define QCA_DFU_TIMEOUT 3000
>> #define QCA_FLAG_MULTI_NVM 0x80
>>
>> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
>> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
>> +
>> struct qca_version {
>> __le32 rom_version;
>> __le32 patch_version;
>> @@ -3221,6 +3224,7 @@ static const struct qca_device_info
>> qca_devices_table[] = {
>> { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>> { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>> { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
>> + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
>> };
>>
>> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
>> request,
>> @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
>> hci_dev *hdev,
>> return err;
>> }
>>
>> +static void btusb_generate_qca_nvm_name(char *fwname,
>> + size_t max_size,
>> + struct qca_version *ver)
>
> => const struct qca_version *ver
>
>> +{
>> + u32 rom_version = le32_to_cpu(ver->rom_version);
>> + u16 flag = le16_to_cpu(ver->flag);
>> +
>> + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
>> + u16 board_id = le16_to_cpu(ver->board_id);
>> + u32 ram_version = le32_to_cpu(ver->ram_version);
>> + const char *variant;
>> +
>> + switch (ram_version) {
>> + case WCN6855_2_0_RAM_VERSION_GF:
>> + case WCN6855_2_1_RAM_VERSION_GF:
>> + variant = "_gf";
>> + break;
>> + default:
>> + variant = "";
>
> instead of the default branch you could assign a default to 'variant'
> at
> declaration time, but it's fine either way.
[Tim] this code style is recommend by marcel.
>
>> + break;
>> + }
>> +
>> + /* if boardid equal 0, use default nvm without suffix */
>
> delete the comment, it just states the obvious
>
>> + if (board_id == 0x0) {
>
> nit: is there really any value in using a hex number here instead of a
> plain decimal 0?
[Tim] this line is inherit from last change , if you think I should
change 0x0 to 0 , I am fine.
>
>> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
>> + rom_version, variant);
>> + } else {
>> + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
>> + rom_version, variant, board_id);
>> + }
>> + } else {
>> + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
>> + rom_version);
>> + }
>> +
>> +}
>> +
>> static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
>> struct qca_version *ver,
>> const struct qca_device_info *info)
>> @@ -3383,20 +3424,7 @@ static int btusb_setup_qca_load_nvm(struct
>> hci_dev
>> *hdev,
>> char fwname[64];
>> int err;
>>
>> - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
>> - /* if boardid equal 0, use default nvm without surfix */
>> - if (le16_to_cpu(ver->board_id) == 0x0) {
>> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
>> - le32_to_cpu(ver->rom_version));
>> - } else {
>> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
>> - le32_to_cpu(ver->rom_version),
>> - le16_to_cpu(ver->board_id));
>> - }
>> - } else {
>> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
>> - le32_to_cpu(ver->rom_version));
>> - }
>> + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
>>
>> err = request_firmware(&fw, fwname, &hdev->dev);
>> if (err) {
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
2021-10-20 4:00 ` tjiang
@ 2021-10-20 15:30 ` Matthias Kaehlcke
2021-10-21 4:07 ` tjiang
0 siblings, 1 reply; 6+ messages in thread
From: Matthias Kaehlcke @ 2021-10-20 15:30 UTC (permalink / raw)
To: tjiang
Cc: marcel, johan.hedberg, luiz.dentz, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, rjliao, zijuhu
On Wed, Oct 20, 2021 at 12:00:52PM +0800, tjiang@codeaurora.org wrote:
> Thanks Matthias for the comments. please see my comments inline .
>
> BTW: marcel , do you agree with Matthias comments ? if fine , I will align
> Matthias comments and make the final version.
>
> regards.
> tim
> On 2021-10-20 03:29, Matthias Kaehlcke wrote:
> > On Tue, Oct 12, 2021 at 03:55:56PM +0800, tjiang@codeaurora.org wrote:
> > > the RF performance of wcn6855 soc chip from different foundries will
> > > be
> > > difference, so we should use different nvm to configure them.
> > >
> > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> > > ---
> > > drivers/bluetooth/btusb.c | 56
> > > +++++++++++++++++++++++++++++++++++------------
> > > 1 file changed, 42 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > > index 75c83768c257..f352ff351b61 100644
> > > --- a/drivers/bluetooth/btusb.c
> > > +++ b/drivers/bluetooth/btusb.c
> > > @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct
> > > hci_dev
> > > *hdev,
> > > #define QCA_DFU_TIMEOUT 3000
> > > #define QCA_FLAG_MULTI_NVM 0x80
> > >
> > > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> > > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> > > +
> > > struct qca_version {
> > > __le32 rom_version;
> > > __le32 patch_version;
> > > @@ -3221,6 +3224,7 @@ static const struct qca_device_info
> > > qca_devices_table[] = {
> > > { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> > > { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> > > { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> > > + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> > > };
> > >
> > > static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
> > > request,
> > > @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
> > > hci_dev *hdev,
> > > return err;
> > > }
> > >
> > > +static void btusb_generate_qca_nvm_name(char *fwname,
> > > + size_t max_size,
> > > + struct qca_version *ver)
> >
> > => const struct qca_version *ver
> >
> > > +{
> > > + u32 rom_version = le32_to_cpu(ver->rom_version);
> > > + u16 flag = le16_to_cpu(ver->flag);
> > > +
> > > + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> > > + u16 board_id = le16_to_cpu(ver->board_id);
> > > + u32 ram_version = le32_to_cpu(ver->ram_version);
> > > + const char *variant;
> > > +
> > > + switch (ram_version) {
> > > + case WCN6855_2_0_RAM_VERSION_GF:
> > > + case WCN6855_2_1_RAM_VERSION_GF:
> > > + variant = "_gf";
> > > + break;
> > > + default:
> > > + variant = "";
> >
> > instead of the default branch you could assign a default to 'variant' at
> > declaration time, but it's fine either way.
>
> [Tim] this code style is recommend by marcel.
Both are ok, if Marcel prefers the default branch let's keep it that way.
> >
> > > + break;
> > > + }
> > > +
> > > + /* if boardid equal 0, use default nvm without suffix */
> >
> > delete the comment, it just states the obvious
> >
> > > + if (board_id == 0x0) {
> >
> > nit: is there really any value in using a hex number here instead of a
> > plain decimal 0?
>
> [Tim] this line is inherit from last change , if you think I should change
> 0x0 to 0 , I am fine.
Since this patch touches/moves this code it seems a good opportunity to clean
things up a bit. It's also true that there are quite a few instances of this
and comparisons with '0x00' in other parts of the kernel, so I guess it's
also fine to leave it as is.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm
2021-10-20 15:30 ` Matthias Kaehlcke
@ 2021-10-21 4:07 ` tjiang
0 siblings, 0 replies; 6+ messages in thread
From: tjiang @ 2021-10-21 4:07 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, luiz.dentz, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, rjliao, zijuhu
thanks Matthias for the new comments.
marcel :
do you agree with my comments which response to Matthias , if is OK, I
will make the final version for the next patch, thank you for the help.
regards.
tim
On 2021-10-20 23:30, Matthias Kaehlcke wrote:
> On Wed, Oct 20, 2021 at 12:00:52PM +0800, tjiang@codeaurora.org wrote:
>> Thanks Matthias for the comments. please see my comments inline .
>>
>> BTW: marcel , do you agree with Matthias comments ? if fine , I will
>> align
>> Matthias comments and make the final version.
>>
>> regards.
>> tim
>> On 2021-10-20 03:29, Matthias Kaehlcke wrote:
>> > On Tue, Oct 12, 2021 at 03:55:56PM +0800, tjiang@codeaurora.org wrote:
>> > > the RF performance of wcn6855 soc chip from different foundries will
>> > > be
>> > > difference, so we should use different nvm to configure them.
>> > >
>> > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
>> > > ---
>> > > drivers/bluetooth/btusb.c | 56
>> > > +++++++++++++++++++++++++++++++++++------------
>> > > 1 file changed, 42 insertions(+), 14 deletions(-)
>> > >
>> > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> > > index 75c83768c257..f352ff351b61 100644
>> > > --- a/drivers/bluetooth/btusb.c
>> > > +++ b/drivers/bluetooth/btusb.c
>> > > @@ -3190,6 +3190,9 @@ static int btusb_set_bdaddr_wcn6855(struct
>> > > hci_dev
>> > > *hdev,
>> > > #define QCA_DFU_TIMEOUT 3000
>> > > #define QCA_FLAG_MULTI_NVM 0x80
>> > >
>> > > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
>> > > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
>> > > +
>> > > struct qca_version {
>> > > __le32 rom_version;
>> > > __le32 patch_version;
>> > > @@ -3221,6 +3224,7 @@ static const struct qca_device_info
>> > > qca_devices_table[] = {
>> > > { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
>> > > { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
>> > > { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
>> > > + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
>> > > };
>> > >
>> > > static int btusb_qca_send_vendor_req(struct usb_device *udev, u8
>> > > request,
>> > > @@ -3375,6 +3379,43 @@ static int btusb_setup_qca_load_rampatch(struct
>> > > hci_dev *hdev,
>> > > return err;
>> > > }
>> > >
>> > > +static void btusb_generate_qca_nvm_name(char *fwname,
>> > > + size_t max_size,
>> > > + struct qca_version *ver)
>> >
>> > => const struct qca_version *ver
[Tim] fine ,will modify it in next version.
>> >
>> > > +{
>> > > + u32 rom_version = le32_to_cpu(ver->rom_version);
>> > > + u16 flag = le16_to_cpu(ver->flag);
>> > > +
>> > > + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
>> > > + u16 board_id = le16_to_cpu(ver->board_id);
>> > > + u32 ram_version = le32_to_cpu(ver->ram_version);
>> > > + const char *variant;
>> > > +
>> > > + switch (ram_version) {
>> > > + case WCN6855_2_0_RAM_VERSION_GF:
>> > > + case WCN6855_2_1_RAM_VERSION_GF:
>> > > + variant = "_gf";
>> > > + break;
>> > > + default:
>> > > + variant = "";
>> >
>> > instead of the default branch you could assign a default to 'variant' at
>> > declaration time, but it's fine either way.
>>
>> [Tim] this code style is recommend by marcel.
>
> Both are ok, if Marcel prefers the default branch let's keep it that
> way.
>
>> >
>> > > + break;
>> > > + }
>> > > +
>> > > + /* if boardid equal 0, use default nvm without suffix */
>> >
>> > delete the comment, it just states the obvious
[Tim] fine, will modify it in next version.
>> >
>> > > + if (board_id == 0x0) {
>> >
>> > nit: is there really any value in using a hex number here instead of a
>> > plain decimal 0?
>>
>> [Tim] this line is inherit from last change , if you think I should
>> change
>> 0x0 to 0 , I am fine.
>
> Since this patch touches/moves this code it seems a good opportunity to
> clean
> things up a bit. It's also true that there are quite a few instances of
> this
> and comparisons with '0x00' in other parts of the kernel, so I guess
> it's
> also fine to leave it as is.
[Tim] I am OK to change from 0x0 to 0 in next version.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-10-21 4:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-12 7:55 [PATCH v2] Bluetooth: btusb: Add support for variant WCN6855 by using different nvm tjiang
2021-10-18 7:49 ` tjiang
2021-10-19 19:29 ` Matthias Kaehlcke
2021-10-20 4:00 ` tjiang
2021-10-20 15:30 ` Matthias Kaehlcke
2021-10-21 4:07 ` tjiang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).