Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH 2/2] ARM: dts: imx6qdl: tqma6: minor fixes

[Matthias Schiffer <matthias.schiffer@ew.tq-group.com>]

On Wed, 2020-08-26 at 12:32 +0200, Matthias Schiffer wrote:
> On Tue, 2020-08-25 at 14:16 -0300, Fabio Estevam wrote:
> > On Tue, Aug 25, 2020 at 11:40 AM Matthias Schiffer
> > <matthias.schiffer@ew.tq-group.com> wrote:
> > 
> > > Makes sense. Does the following logic sound correct?
> > > 
> > > - If num-cs is set, use that (and add it to the docs)
> > 
> > I would not add num-cs to the docs. As far as I can see there is no
> > imx dts that uses num-cs currently.
> 
> But the previous platform data that was removed in 8cdcd8aeee281
> ("spi:
> imx/fsl-lpspi: Convert to GPIO descriptors") set different values for
> different boards. So maybe some DTS should be using num-cs?
> 
> 
> > 
> > > - If num-cs is unset, use the number of cs-gpios
> > > - If num-cs is unset and no cs-gpios are defined, use a driver-
> > > provided
> > > default
> > > 
> > > 
> > > I'm not sure if 3 is a particularly useful default either, but it
> > > seems
> > > it was chosen to accommodate boards that previously set this via
> > > platform data. All SoCs I've checked (i.MX6Q/DL, i.MX6UL, i.MX7)
> > > have 4
> > > internal CS pins per ECSPI instance, so maybe the driver should
> > > use
> > > that as its default instead?
> > 
> > I think it is time to get rid of i.MX board files. I will try to
> > work
> > on this when I have a chance.
> > 
> > bout using 4 as default chip select number, please also check some
> > older SoCs like imx25, imx35, imx51, imx53, etc
> 
> Hmm, I just checked i.MX28, and it has only 3 chip selects per
> instance.

Ah sorry, I got confused, the i.MX28 has a different SPI IP.