[RESEND PATCH 0/7] Add some fixes and new feature for SPRD DMA

[RESEND PATCH 0/7] Add some fixes and new feature for SPRD DMA

[Baolin Wang]

This patchset removes the direction usage from struct dma_slave_config,
and add one new field to save the direction. It also fixes some issues
for link-list transfer. Moreover this patchset adds new 2-stage transfer
support for our DMA.

Baolin Wang (1):
  dmaengine: sprd: Remove direction usage from struct dma_slave_config

Eric Long (6):
  dmaengine: sprd: Get transfer residue depending on the transfer
    direction
  dmaengine: sprd: Fix the last link-list configuration
  dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma
    channel
  dmaengine: sprd: Support DMA link-list cyclic callback
  dmaengine: sprd: Support DMA 2-stage transfer mode
  dmaengine: sprd: Add me as one of the module authors

 drivers/dma/sprd-dma.c       |  152 +++++++++++++++++++++++++++++++++++++-----
 include/linux/dma/sprd-dma.h |   62 ++++++++++++++++-
 2 files changed, 194 insertions(+), 20 deletions(-)

-- 
1.7.9.5

[RESEND PATCH 1/7] dmaengine: sprd: Remove direction usage from struct dma_slave_config

[Baolin Wang]

The direction field of struct dma_slave_config was marked deprecated,
thus remove the usage.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 38d4e4f..c226dc93 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -847,9 +847,6 @@ static int sprd_dma_slave_config(struct dma_chan *chan,
 	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
 	struct dma_slave_config *slave_cfg = &schan->slave_cfg;
 
-	if (!is_slave_direction(config->direction))
-		return -EINVAL;
-
 	memcpy(slave_cfg, config, sizeof(*config));
 	return 0;
 }
-- 
1.7.9.5

[RESEND PATCH 2/7] dmaengine: sprd: Get transfer residue depending on the transfer direction

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

Add one field to save the transfer direction for struct sprd_dma_desc,
which is used to get correct transfer residue depending on the transfer
direction.

[Baolin Wang adds one field to present the transfer direction]
Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |   21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index c226dc93..4f3587b 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -159,6 +159,7 @@ struct sprd_dma_chn_hw {
 struct sprd_dma_desc {
 	struct virt_dma_desc	vd;
 	struct sprd_dma_chn_hw	chn_hw;
+	enum dma_transfer_direction dir;
 };
 
 /* dma channel description */
@@ -331,6 +332,17 @@ static void sprd_dma_stop_and_disable(struct sprd_dma_chn *schan)
 	sprd_dma_disable_chn(schan);
 }
 
+static unsigned long sprd_dma_get_src_addr(struct sprd_dma_chn *schan)
+{
+	unsigned long addr, addr_high;
+
+	addr = readl(schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
+	addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_PTR) &
+		    SPRD_DMA_HIGH_ADDR_MASK;
+
+	return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
+}
+
 static unsigned long sprd_dma_get_dst_addr(struct sprd_dma_chn *schan)
 {
 	unsigned long addr, addr_high;
@@ -534,7 +546,12 @@ static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
 		else
 			pos = 0;
 	} else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
-		pos = sprd_dma_get_dst_addr(schan);
+		struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+
+		if (sdesc->dir == DMA_DEV_TO_MEM)
+			pos = sprd_dma_get_dst_addr(schan);
+		else
+			pos = sprd_dma_get_src_addr(schan);
 	} else {
 		pos = 0;
 	}
@@ -804,6 +821,8 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
 	if (!sdesc)
 		return NULL;
 
+	sdesc->dir = dir;
+
 	for_each_sg(sgl, sg, sglen, i) {
 		len = sg_dma_len(sg);
 
-- 
1.7.9.5

[RESEND PATCH 3/7] dmaengine: sprd: Fix the last link-list configuration

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

We will pass sglen as 0 configure the last link-list configuration
when filling the descriptor, which will cause the incorrect link-list
configuration. Thus we should check if the sglen is 0 to configure
the correct link-list configuration.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 4f3587b..e6a74dc 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -697,7 +697,8 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 		hw->cfg |= SPRD_DMA_LINKLIST_EN;
 
 		/* link-list index */
-		temp = (sg_index + 1) % sglen;
+		temp = sglen ? (sg_index + 1) % sglen : 0;
+
 		/* Next link-list configuration's physical address offset */
 		temp = temp * sizeof(*hw) + SPRD_DMA_CHN_SRC_ADDR;
 		/*
-- 
1.7.9.5

[RESEND PATCH 4/7] dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

It will be failed to start one new transfer if the channel started one
none interrupt transfer before, since we will only set the schan->cur_desc
as NULL depending on the transfer interrupt now. Thus we should set
schan->cur_desc as NULL when free or terminate one dma channel to
avoid this issue.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index e6a74dc..1b39661 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -439,6 +439,7 @@ static void sprd_dma_stop(struct sprd_dma_chn *schan)
 	sprd_dma_stop_and_disable(schan);
 	sprd_dma_unset_uid(schan);
 	sprd_dma_clear_int(schan);
+	schan->cur_desc = NULL;
 }
 
 static bool sprd_dma_check_trans_done(struct sprd_dma_desc *sdesc,
-- 
1.7.9.5

[RESEND PATCH 5/7] dmaengine: sprd: Support DMA link-list cyclic callback

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

The Spreadtrum DMA link-list mode is always one cyclic transfer,
so we should clear the SPRD_DMA_LLIST_END flag for the link-list
configuration. Moreover add cyclic callback support for the cyclic
transfer.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |   25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 1b39661..cefe42f 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -463,7 +463,7 @@ static irqreturn_t dma_irq_handle(int irq, void *dev_id)
 	struct sprd_dma_desc *sdesc;
 	enum sprd_dma_req_mode req_type;
 	enum sprd_dma_int_type int_type;
-	bool trans_done = false;
+	bool trans_done = false, cyclic = false;
 	u32 i;
 
 	while (irq_status) {
@@ -478,13 +478,19 @@ static irqreturn_t dma_irq_handle(int irq, void *dev_id)
 
 		sdesc = schan->cur_desc;
 
-		/* Check if the dma request descriptor is done. */
-		trans_done = sprd_dma_check_trans_done(sdesc, int_type,
-						       req_type);
-		if (trans_done == true) {
-			vchan_cookie_complete(&sdesc->vd);
-			schan->cur_desc = NULL;
-			sprd_dma_start(schan);
+		/* cyclic mode schedule callback */
+		cyclic = schan->linklist.phy_addr ? true : false;
+		if (cyclic == true) {
+			vchan_cyclic_callback(&sdesc->vd);
+		} else {
+			/* Check if the dma request descriptor is done. */
+			trans_done = sprd_dma_check_trans_done(sdesc, int_type,
+							       req_type);
+			if (trans_done == true) {
+				vchan_cookie_complete(&sdesc->vd);
+				schan->cur_desc = NULL;
+				sprd_dma_start(schan);
+			}
 		}
 		spin_unlock(&schan->vc.lock);
 	}
@@ -692,9 +698,6 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 
 	/* link-list configuration */
 	if (schan->linklist.phy_addr) {
-		if (sg_index == sglen - 1)
-			hw->frg_len |= SPRD_DMA_LLIST_END;
-
 		hw->cfg |= SPRD_DMA_LINKLIST_EN;
 
 		/* link-list index */
-- 
1.7.9.5

[RESEND PATCH 6/7] dmaengine: sprd: Support DMA 2-stage transfer mode

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

The Spreadtrum DMA controller supports channel 2-stage tansfer mode,
that means we can request 2 dma channels, one for source channel, and
another one for destination channel. Once the source channel's transaction
is done, it will trigger the destination channel's transaction automatically
by hardware signal.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c       |   98 +++++++++++++++++++++++++++++++++++++++++-
 include/linux/dma/sprd-dma.h |   62 ++++++++++++++++++++++++--
 2 files changed, 156 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index cefe42f..50d6569 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -36,6 +36,8 @@
 #define SPRD_DMA_GLB_CHN_EN_STS		0x1c
 #define SPRD_DMA_GLB_DEBUG_STS		0x20
 #define SPRD_DMA_GLB_ARB_SEL_STS	0x24
+#define SPRD_DMA_GLB_2STAGE_GRP1	0x28
+#define SPRD_DMA_GLB_2STAGE_GRP2	0x2c
 #define SPRD_DMA_GLB_REQ_UID(uid)	(0x4 * ((uid) - 1))
 #define SPRD_DMA_GLB_REQ_UID_OFFSET	0x2000
 
@@ -57,6 +59,18 @@
 #define SPRD_DMA_CHN_SRC_BLK_STEP	0x38
 #define SPRD_DMA_CHN_DES_BLK_STEP	0x3c
 
+/* SPRD_DMA_GLB_2STAGE_GRP register definition */
+#define SPRD_DMA_GLB_2STAGE_EN		BIT(24)
+#define SPRD_DMA_GLB_CHN_INT_MASK	GENMASK(23, 20)
+#define SPRD_DMA_GLB_LIST_DONE_TRG	BIT(19)
+#define SPRD_DMA_GLB_TRANS_DONE_TRG	BIT(18)
+#define SPRD_DMA_GLB_BLOCK_DONE_TRG	BIT(17)
+#define SPRD_DMA_GLB_FRAG_DONE_TRG	BIT(16)
+#define SPRD_DMA_GLB_TRG_OFFSET		16
+#define SPRD_DMA_GLB_DEST_CHN_MASK	GENMASK(13, 8)
+#define SPRD_DMA_GLB_DEST_CHN_OFFSET	8
+#define SPRD_DMA_GLB_SRC_CHN_MASK	GENMASK(5, 0)
+
 /* SPRD_DMA_CHN_INTC register definition */
 #define SPRD_DMA_INT_MASK		GENMASK(4, 0)
 #define SPRD_DMA_INT_CLR_OFFSET		24
@@ -118,6 +132,10 @@
 #define SPRD_DMA_SRC_TRSF_STEP_OFFSET	0
 #define SPRD_DMA_TRSF_STEP_MASK		GENMASK(15, 0)
 
+/* define DMA channel mode & trigger mode mask */
+#define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)
+#define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)
+
 /* define the DMA transfer step type */
 #define SPRD_DMA_NONE_STEP		0
 #define SPRD_DMA_BYTE_STEP		1
@@ -170,6 +188,8 @@ struct sprd_dma_chn {
 	struct dma_slave_config	slave_cfg;
 	u32			chn_num;
 	u32			dev_id;
+	enum sprd_dma_chn_mode	chn_mode;
+	enum sprd_dma_trg_mode	trg_mode;
 	struct sprd_dma_desc	*cur_desc;
 };
 
@@ -206,6 +226,16 @@ static inline struct sprd_dma_desc *to_sprd_dma_desc(struct virt_dma_desc *vd)
 	return container_of(vd, struct sprd_dma_desc, vd);
 }
 
+static void sprd_dma_glb_update(struct sprd_dma_dev *sdev, u32 reg,
+				u32 mask, u32 val)
+{
+	u32 orig = readl(sdev->glb_base + reg);
+	u32 tmp;
+
+	tmp = (orig & ~mask) | val;
+	writel(tmp, sdev->glb_base + reg);
+}
+
 static void sprd_dma_chn_update(struct sprd_dma_chn *schan, u32 reg,
 				u32 mask, u32 val)
 {
@@ -389,6 +419,49 @@ static enum sprd_dma_req_mode sprd_dma_get_req_type(struct sprd_dma_chn *schan)
 	return (frag_reg >> SPRD_DMA_REQ_MODE_OFFSET) & SPRD_DMA_REQ_MODE_MASK;
 }
 
+static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
+{
+	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+	u32 val, chn = schan->chn_num + 1;
+
+	switch (schan->chn_mode) {
+	case SPRD_DMA_SRC_CHN0:
+		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
+		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
+		break;
+
+	case SPRD_DMA_SRC_CHN1:
+		val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
+		val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
+		break;
+
+	case SPRD_DMA_DST_CHN0:
+		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
+			SPRD_DMA_GLB_DEST_CHN_MASK;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
+		break;
+
+	case SPRD_DMA_DST_CHN1:
+		val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
+			SPRD_DMA_GLB_DEST_CHN_MASK;
+		val |= SPRD_DMA_GLB_2STAGE_EN;
+		sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
+		break;
+
+	default:
+		dev_err(sdev->dma_dev.dev, "invalid channel mode setting %d\n",
+			schan->chn_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void sprd_dma_set_chn_config(struct sprd_dma_chn *schan,
 				    struct sprd_dma_desc *sdesc)
 {
@@ -423,6 +496,13 @@ static void sprd_dma_start(struct sprd_dma_chn *schan)
 	schan->cur_desc = to_sprd_dma_desc(vd);
 
 	/*
+	 * Set 2-stage configuration if the channel starts one 2-stage
+	 * transfer.
+	 */
+	if (schan->chn_mode && sprd_dma_set_2stage_config(schan))
+		return;
+
+	/*
 	 * Copy the DMA configuration from DMA descriptor to this hardware
 	 * channel.
 	 */
@@ -617,6 +697,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 {
 	struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
 	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	enum sprd_dma_chn_mode chn_mode = schan->chn_mode;
 	u32 req_mode = (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
 	u32 int_mode = flags & SPRD_DMA_INT_MASK;
 	int src_datawidth, dst_datawidth, src_step, dst_step;
@@ -628,7 +709,16 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 			dev_err(sdev->dma_dev.dev, "invalid source step\n");
 			return src_step;
 		}
-		dst_step = SPRD_DMA_NONE_STEP;
+
+		/*
+		 * For 2-stage transfer, destination channel step can not be 0,
+		 * since destination device is AON IRAM.
+		 */
+		if (chn_mode == SPRD_DMA_DST_CHN0 ||
+		    chn_mode == SPRD_DMA_DST_CHN1)
+			dst_step = src_step;
+		else
+			dst_step = SPRD_DMA_NONE_STEP;
 	} else {
 		dst_step = sprd_dma_get_step(slave_cfg->dst_addr_width);
 		if (dst_step < 0) {
@@ -855,6 +945,12 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
 		}
 	}
 
+	/* Set channel mode and trigger mode for 2-stage transfer */
+	schan->chn_mode =
+		(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
+	schan->trg_mode =
+		(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+
 	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, src, dst, len,
 				 dir, flags, slave_cfg);
 	if (ret) {
diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
index b42b80e5..ab82df6 100644
--- a/include/linux/dma/sprd-dma.h
+++ b/include/linux/dma/sprd-dma.h
@@ -3,9 +3,65 @@
 #ifndef _SPRD_DMA_H_
 #define _SPRD_DMA_H_
 
-#define SPRD_DMA_REQ_SHIFT 16
-#define SPRD_DMA_FLAGS(req_mode, int_type) \
-	((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+#define SPRD_DMA_REQ_SHIFT	8
+#define SPRD_DMA_TRG_MODE_SHIFT	16
+#define SPRD_DMA_CHN_MODE_SHIFT	24
+#define SPRD_DMA_FLAGS(chn_mode, trg_mode, req_mode, int_type) \
+	((chn_mode) << SPRD_DMA_CHN_MODE_SHIFT | \
+	(trg_mode) << SPRD_DMA_TRG_MODE_SHIFT | \
+	(req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+
+/*
+ * The Spreadtrum DMA controller supports channel 2-stage tansfer, that means
+ * we can request 2 dma channels, one for source channel, and another one for
+ * destination channel. Each channel is independent, and has its own
+ * configurations. Once the source channel's transaction is done, it will
+ * trigger the destination channel's transaction automatically by hardware
+ * signal.
+ *
+ * To support 2-stage tansfer, we must configure the channel mode and trigger
+ * mode as below definition.
+ */
+
+/*
+ * enum sprd_dma_chn_mode: define the DMA channel mode for 2-stage transfer
+ * @SPRD_DMA_CHN_MODE_NONE: No channel mode setting which means channel doesn't
+ * support the 2-stage transfer.
+ * @SPRD_DMA_SRC_CHN0: Channel used as source channel 0.
+ * @SPRD_DMA_SRC_CHN1: Channel used as source channel 1.
+ * @SPRD_DMA_DST_CHN0: Channel used as destination channel 0.
+ * @SPRD_DMA_DST_CHN1: Channel used as destination channel 1.
+ *
+ * Now the DMA controller can supports 2 groups 2-stage transfer.
+ */
+enum sprd_dma_chn_mode {
+	SPRD_DMA_CHN_MODE_NONE,
+	SPRD_DMA_SRC_CHN0,
+	SPRD_DMA_SRC_CHN1,
+	SPRD_DMA_DST_CHN0,
+	SPRD_DMA_DST_CHN1,
+};
+
+/*
+ * enum sprd_dma_trg_mode: define the DMA channel trigger mode for 2-stage
+ * transfer
+ * @SPRD_DMA_NO_TRG: No trigger setting.
+ * @SPRD_DMA_FRAG_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's fragment request is done.
+ * @SPRD_DMA_BLOCK_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's block request is done.
+ * @SPRD_DMA_TRANS_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's transfer request is done.
+ * @SPRD_DMA_LIST_DONE_TRG: Trigger the transaction of destination channel
+ * automatically once the source channel's link-list request is done.
+ */
+enum sprd_dma_trg_mode {
+	SPRD_DMA_NO_TRG,
+	SPRD_DMA_FRAG_DONE_TRG,
+	SPRD_DMA_BLOCK_DONE_TRG,
+	SPRD_DMA_TRANS_DONE_TRG,
+	SPRD_DMA_LIST_DONE_TRG,
+};
 
 /*
  * enum sprd_dma_req_mode: define the DMA request mode
-- 
1.7.9.5

[RESEND PATCH 7/7] dmaengine: sprd: Add me as one of the module authors

[Baolin Wang]

From: Eric Long <eric.long@spreadtrum.com>

Add me as one of the module authors.

Signed-off-by: Eric Long <eric.long@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/dma/sprd-dma.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 50d6569..e2f0167 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1226,4 +1226,5 @@ static int __maybe_unused sprd_dma_runtime_resume(struct device *dev)
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("DMA driver for Spreadtrum");
 MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_AUTHOR("Eric Long <eric.long@spreadtrum.com>");
 MODULE_ALIAS("platform:sprd-dma");
-- 
1.7.9.5

Re: [RESEND PATCH 0/7] Add some fixes and new feature for SPRD DMA

[Baolin Wang]

Hi Vinod,

On Tue, 6 Nov 2018 at 13:01, Baolin Wang <baolin.wang@linaro.org> wrote:
>
> This patchset removes the direction usage from struct dma_slave_config,
> and add one new field to save the direction. It also fixes some issues
> for link-list transfer. Moreover this patchset adds new 2-stage transfer
> support for our DMA.

Any comments for this patch set? Thanks.

>
> Baolin Wang (1):
>   dmaengine: sprd: Remove direction usage from struct dma_slave_config
>
> Eric Long (6):
>   dmaengine: sprd: Get transfer residue depending on the transfer
>     direction
>   dmaengine: sprd: Fix the last link-list configuration
>   dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma
>     channel
>   dmaengine: sprd: Support DMA link-list cyclic callback
>   dmaengine: sprd: Support DMA 2-stage transfer mode
>   dmaengine: sprd: Add me as one of the module authors
>
>  drivers/dma/sprd-dma.c       |  152 +++++++++++++++++++++++++++++++++++++-----
>  include/linux/dma/sprd-dma.h |   62 ++++++++++++++++-
>  2 files changed, 194 insertions(+), 20 deletions(-)
>
> --
> 1.7.9.5
>


--
Baolin Wang
Best Regards

Re: [RESEND PATCH 0/7] Add some fixes and new feature for SPRD DMA

[Vinod Koul]

On 06-11-18, 13:01, Baolin Wang wrote:
> This patchset removes the direction usage from struct dma_slave_config,
> and add one new field to save the direction. It also fixes some issues
> for link-list transfer. Moreover this patchset adds new 2-stage transfer
> support for our DMA.

Applied, thanks

-- 
~Vinod