Problems booting 2.4.17

Problems booting 2.4.17

[Edward Muller]

Hello all.

I'm having problems booting 2.4.17 on a Mandrake 8.1 system (with all
current updates).

When I boot 2.4.17 (with an initrd image) I get the following...

kernel boots ...
Creating root device
mkrootdev: mknod failed: 17
Mounting root filesyste with flags data=ordered
Mount: error 16 mounting ext3 flags data=ordered
...Tried to remount without flags and fails with the same error...
Kernel Panic: No initrd found ...

I am using ext3 / /boot /usr /var & /home filesystems

2.4.8-34.1mdk boots fine however.

I'm about to go try 2.4.16 (it was working with reiserfs partitions
before).

The machine is an AMD Athalon 1.3 Ghz on an EPOC board with a 3ware 7800
series RAID card, with three 75/80 GB drives in a RAID 5 array.

Anyone else run into something like this? 

I'll report back about 2.4.16 and if anyone would like more info, just
shout.


-- 
-------------------------------
Edward Muller
Director of IS

973-715-0230 (cell)
212-487-9064 x115 (NYC)

http://www.learningpatterns.com
-------------------------------

Re: Problems booting 2.4.17

[Edward Muller]

Compiled/Installed 2.4.16 and the machine boots without a problem. 

So is it a 2.4.17 issue or do I need to upgrade something else?

On Thu, 2001-12-27 at 12:58, Edward Muller wrote:
> Hello all.
> 
> I'm having problems booting 2.4.17 on a Mandrake 8.1 system (with all
> current updates).
> 
> When I boot 2.4.17 (with an initrd image) I get the following...
> 
> kernel boots ...
> Creating root device
> mkrootdev: mknod failed: 17
> Mounting root filesyste with flags data=ordered
> Mount: error 16 mounting ext3 flags data=ordered
> ...Tried to remount without flags and fails with the same error...
> Kernel Panic: No initrd found ...
> 
> I am using ext3 / /boot /usr /var & /home filesystems
> 
> 2.4.8-34.1mdk boots fine however.
> 
> I'm about to go try 2.4.16 (it was working with reiserfs partitions
> before).
> 
> The machine is an AMD Athalon 1.3 Ghz on an EPOC board with a 3ware 7800
> series RAID card, with three 75/80 GB drives in a RAID 5 array.
> 
> Anyone else run into something like this? 
> 
> I'll report back about 2.4.16 and if anyone would like more info, just
> shout.
> 
> 
> -- 
> -------------------------------
> Edward Muller
> Director of IS
> 
> 973-715-0230 (cell)
> 212-487-9064 x115 (NYC)
> 
> http://www.learningpatterns.com
> -------------------------------
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-- 
-------------------------------
Edward Muller
Director of IS

973-715-0230 (cell)
212-487-9064 x115 (NYC)

http://www.learningpatterns.com
-------------------------------

RE: Problems booting 2.4.17

[Edward Muller]

Hmmm. Maybe it's a binutils problems like what was reported by some
debian sid users.


On Tue, 2002-01-01 at 20:20, Chris, Lo Cheuk Kong wrote:
> 
> Thanks for info. My workaround is that: don't use initrd image and it boots
> fine! 
> My hardware setup is simple and allows me to put modules back into the
> kernel. For 2.4.17, I drop the initrd line in the lilo...
> 
> -----Original Message-----
> From: Edward Muller [mailto:emuller@learningpatterns.com]
> Sent: Wednesday, January 02, 2002 2:08 AM
> To: chris.lo@corp.sunday.com
> Cc: linux-kernel@vger.kernel.org
> Subject: RE: Problems booting 2.4.17
> 
> 
> For now I've moved back to 2.4.16, which boots without a problem. I had
> lots of work to do to get those systems up and configured so I haven't
> had time to play.
> 
> I'm not sure what is causing the problem. I know how to make an initrd
> image and it's there. It may be a problem with devfs because I remember
> that Mandrake based their devfs scripts on some very very very old stuff
> from the devfs ditribution (which is being removed IIRC).
> 
> It's probably not fs based as you are using reiserfs and I'm using ext3.
> 
> Anyway ... For now I've gone back to 2.4.16, but I'd like to try 2.4.17.
> So if you happen to have some time and figure it out, please let me
> know.
> 
> On Mon, 2001-12-31 at 23:51, Chris Lo wrote:
> > Good Morning,
> > 
> > I had the same problem, with resierfs. Any workaround 
> > found?
> > 
> > Have a happy new year!!
> > 
> > Regards,
> > Chris
> > 
> > 
> > 
> > 
> > Hello all.
> > 
> > I'm having problems booting 2.4.17 on a Mandrake 8.1 system (with all
> > current updates).
> > 
> > When I boot 2.4.17 (with an initrd image) I get the following...
> > 
> > kernel boots ...
> > Creating root device
> > mkrootdev: mknod failed: 17
> > Mounting root filesyste with flags data=ordered
> > Mount: error 16 mounting ext3 flags data=ordered
> > ...Tried to remount without flags and fails with the same error...
> > Kernel Panic: No initrd found ...
> > 
> > I am using ext3 / /boot /usr /var & /home filesystems
> > 
> > 2.4.8-34.1mdk boots fine however.
> > 
> > I'm about to go try 2.4.16 (it was working with reiserfs partitions
> > before).
> > 
> > The machine is an AMD Athalon 1.3 Ghz on an EPOC board with a 3ware 7800
> > series RAID card, with three 75/80 GB drives in a RAID 5 array.
> > 
> > Anyone else run into something like this? 
> > 
> > I'll report back about 2.4.16 and if anyone would like more info, just
> > shout.
> > 
> > 
> > -- 
> > -------------------------------
> > Edward Muller
> > Director of IS
> > 
> > 973-715-0230 (cell)
> > 212-487-9064 x115 (NYC)
> > 
> > http://www.learningpatterns.com
> > -------------------------------
> > 
> -- 
> -------------------------------
> Edward Muller
> Director of IS
> 
> 973-715-0230 (cell)
> 212-487-9064 x115 (NYC)
> 
> http://www.learningpatterns.com
> -------------------------------
-- 
-------------------------------
Edward Muller
Director of IS

973-715-0230 (cell)
212-487-9064 x115 (NYC)

http://www.learningpatterns.com
-------------------------------

RE: Problems booting 2.4.17

[Chris, Lo Cheuk Kong]

Thanks for info. My workaround is that: don't use initrd image and it boots
fine! 
My hardware setup is simple and allows me to put modules back into the
kernel. For 2.4.17, I drop the initrd line in the lilo...

-----Original Message-----
From: Edward Muller [mailto:emuller@learningpatterns.com]
Sent: Wednesday, January 02, 2002 2:08 AM
To: chris.lo@corp.sunday.com
Cc: linux-kernel@vger.kernel.org
Subject: RE: Problems booting 2.4.17


For now I've moved back to 2.4.16, which boots without a problem. I had
lots of work to do to get those systems up and configured so I haven't
had time to play.

I'm not sure what is causing the problem. I know how to make an initrd
image and it's there. It may be a problem with devfs because I remember
that Mandrake based their devfs scripts on some very very very old stuff
from the devfs ditribution (which is being removed IIRC).

It's probably not fs based as you are using reiserfs and I'm using ext3.

Anyway ... For now I've gone back to 2.4.16, but I'd like to try 2.4.17.
So if you happen to have some time and figure it out, please let me
know.

On Mon, 2001-12-31 at 23:51, Chris Lo wrote:
> Good Morning,
> 
> I had the same problem, with resierfs. Any workaround 
> found?
> 
> Have a happy new year!!
> 
> Regards,
> Chris
> 
> 
> 
> 
> Hello all.
> 
> I'm having problems booting 2.4.17 on a Mandrake 8.1 system (with all
> current updates).
> 
> When I boot 2.4.17 (with an initrd image) I get the following...
> 
> kernel boots ...
> Creating root device
> mkrootdev: mknod failed: 17
> Mounting root filesyste with flags data=ordered
> Mount: error 16 mounting ext3 flags data=ordered
> ...Tried to remount without flags and fails with the same error...
> Kernel Panic: No initrd found ...
> 
> I am using ext3 / /boot /usr /var & /home filesystems
> 
> 2.4.8-34.1mdk boots fine however.
> 
> I'm about to go try 2.4.16 (it was working with reiserfs partitions
> before).
> 
> The machine is an AMD Athalon 1.3 Ghz on an EPOC board with a 3ware 7800
> series RAID card, with three 75/80 GB drives in a RAID 5 array.
> 
> Anyone else run into something like this? 
> 
> I'll report back about 2.4.16 and if anyone would like more info, just
> shout.
> 
> 
> -- 
> -------------------------------
> Edward Muller
> Director of IS
> 
> 973-715-0230 (cell)
> 212-487-9064 x115 (NYC)
> 
> http://www.learningpatterns.com
> -------------------------------
> 
-- 
-------------------------------
Edward Muller
Director of IS

973-715-0230 (cell)
212-487-9064 x115 (NYC)

http://www.learningpatterns.com
-------------------------------

RE: Problems booting 2.4.17

[Edward Muller]

For now I've moved back to 2.4.16, which boots without a problem. I had
lots of work to do to get those systems up and configured so I haven't
had time to play.

I'm not sure what is causing the problem. I know how to make an initrd
image and it's there. It may be a problem with devfs because I remember
that Mandrake based their devfs scripts on some very very very old stuff
from the devfs ditribution (which is being removed IIRC).

It's probably not fs based as you are using reiserfs and I'm using ext3.

Anyway ... For now I've gone back to 2.4.16, but I'd like to try 2.4.17.
So if you happen to have some time and figure it out, please let me
know.

On Mon, 2001-12-31 at 23:51, Chris Lo wrote:
> Good Morning,
> 
> I had the same problem, with resierfs. Any workaround 
> found?
> 
> Have a happy new year!!
> 
> Regards,
> Chris
> 
> 
> 
> 
> Hello all.
> 
> I'm having problems booting 2.4.17 on a Mandrake 8.1 system (with all
> current updates).
> 
> When I boot 2.4.17 (with an initrd image) I get the following...
> 
> kernel boots ...
> Creating root device
> mkrootdev: mknod failed: 17
> Mounting root filesyste with flags data=ordered
> Mount: error 16 mounting ext3 flags data=ordered
> ...Tried to remount without flags and fails with the same error...
> Kernel Panic: No initrd found ...
> 
> I am using ext3 / /boot /usr /var & /home filesystems
> 
> 2.4.8-34.1mdk boots fine however.
> 
> I'm about to go try 2.4.16 (it was working with reiserfs partitions
> before).
> 
> The machine is an AMD Athalon 1.3 Ghz on an EPOC board with a 3ware 7800
> series RAID card, with three 75/80 GB drives in a RAID 5 array.
> 
> Anyone else run into something like this? 
> 
> I'll report back about 2.4.16 and if anyone would like more info, just
> shout.
> 
> 
> -- 
> -------------------------------
> Edward Muller
> Director of IS
> 
> 973-715-0230 (cell)
> 212-487-9064 x115 (NYC)
> 
> http://www.learningpatterns.com
> -------------------------------
> 
-- 
-------------------------------
Edward Muller
Director of IS

973-715-0230 (cell)
212-487-9064 x115 (NYC)

http://www.learningpatterns.com
-------------------------------