* [PATCH 1/1] Update Technisat Skystar2 DVB driver
@ 2003-07-16 11:34 Michael Hunold
0 siblings, 0 replies; only message in thread
From: Michael Hunold @ 2003-07-16 11:34 UTC (permalink / raw)
To: linux-kernel, alan, torvalds
Hi all,
this is a follow-up patch to my latest patch series.
It fixes the problems and flaws Greg KH has pointed out.
The problem was, that there was a typo in the Makefile, so the
driver was never compiled. But I assumed that it build without
errors. Doh!
Simply apply on top of the other patches.
CU
Michael.
[DVB] - update the Technisat Skystar2 driver:
- follow kernel coding rules, change comments
- change function return values from u32 to int where possible
- make all functions static
- comment out unused functions
- fix return values of functions to follow kernel rules
- removed bogus delay, read and write functions
diff -uNrwB --new-file linux-2.6.0-test1.patch/drivers/media/dvb/b2c2/Makefile linux-2.6.0-test1.work/drivers/media/dvb/b2c2/Makefile
--- linux-2.6.0-test1.patch/drivers/media/dvb/b2c2/Makefile 2003-07-16 11:24:14.000000000 +0200
+++ linux-2.6.0-test1.work/drivers/media/dvb/b2c2/Makefile 2003-07-16 11:26:19.000000000 +0200
@@ -1,3 +1,3 @@
-obj-$(DVB_B2C2_SKYSTAR) += skystar.o
+obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
diff -uNrwB --new-file linux-2.6.0-test1.patch/drivers/media/dvb/b2c2/skystar2.c linux-2.6.0-test1.work/drivers/media/dvb/b2c2/skystar2.c
--- linux-2.6.0-test1.patch/drivers/media/dvb/b2c2/skystar2.c 2003-07-16 11:24:14.000000000 +0200
+++ linux-2.6.0-test1.work/drivers/media/dvb/b2c2/skystar2.c 2003-07-16 11:26:16.000000000 +0200
@@ -35,13 +35,13 @@
#include "demux.h"
#include "dvb_net.h"
-int debug = 0;
-#define dprintk if(debug != 0) printk
+static int debug = 0;
+#define dprintk(x...) do { if (debug) printk(x); } while (0)
#define SizeOfBufDMA1 0x3AC00
#define SizeOfBufDMA2 0x758
-struct DmaQ {
+struct dmaq {
u32 bus_addr;
u32 head;
@@ -50,7 +50,7 @@
u8 *buffer;
};
-struct packet_header_t {
+struct packet_header {
u32 sync_byte;
u32 transport_error_indicator;
@@ -67,7 +67,7 @@
struct pci_dev *pdev;
u8 card_revision;
- u32 B2C2_revision;
+ u32 b2c2_revision;
u32 PidFilterMax;
u32 MacFilterMax;
u32 irq;
@@ -86,8 +86,8 @@
struct semaphore i2c_sem;
- struct DmaQ DmaQ1;
- struct DmaQ DmaQ2;
+ struct dmaq dmaq1;
+ struct dmaq dmaq2;
u32 dma_ctrl;
u32 dma_status;
@@ -100,38 +100,10 @@
u32 mac_filter;
};
+#define WriteRegDW(adapter,reg,value) writel(value, adapter->io_mem + reg)
+#define ReadRegDW(adapter,reg) readl(adapter->io_mem + reg)
-void linuxdelayms(u32 usecs)
-{
- while (usecs > 0) {
- udelay(1000);
-
- usecs--;
- }
-}
-
-/////////////////////////////////////////////////////////////////////
-// register functions
-/////////////////////////////////////////////////////////////////////
-
-void WriteRegDW(struct adapter *adapter, u32 reg, u32 value)
-{
- u32 flags;
-
- save_flags(flags);
- cli();
-
- writel(value, adapter->io_mem + reg);
-
- restore_flags(flags);
-}
-
-u32 ReadRegDW(struct adapter *adapter, u32 reg)
-{
- return readl(adapter->io_mem + reg);
-}
-
-u32 WriteRegOp(struct adapter * adapter, u32 reg, u32 operation, u32 andvalue, u32 orvalue)
+static void WriteRegOp(struct adapter *adapter, u32 reg, u32 operation, u32 andvalue, u32 orvalue)
{
u32 tmp;
@@ -145,15 +117,10 @@
tmp = (tmp & andvalue) | orvalue;
WriteRegDW(adapter, reg, tmp);
-
- return tmp;
}
-/////////////////////////////////////////////////////////////////////
-// I2C
-////////////////////////////////////////////////////////////////////
-
-u32 i2cMainWriteForFlex2(struct adapter * adapter, u32 command, u8 * buf, u32 retries)
+/* i2c functions */
+static int i2cMainWriteForFlex2(struct adapter * adapter, u32 command, u8 * buf, u32 retries)
{
u32 i;
u32 value;
@@ -182,33 +148,25 @@
return 0;
}
-/////////////////////////////////////////////////////////////////////
-// device = 0x10000000 for tuner
-// 0x20000000 for eeprom
-/////////////////////////////////////////////////////////////////////
-
-u32 i2cMainSetup(u32 device, u32 chip_addr, u8 op, u8 addr, u32 value, u32 len)
+/* device = 0x10000000 for tuner, 0x20000000 for eeprom */
+static void i2cMainSetup(u32 device, u32 chip_addr, u8 op, u8 addr, u32 value, u32 len, u32 *command)
{
- u32 command;
-
- command = device | ((len - 1) << 26) | (value << 16) | (addr << 8) | chip_addr;
+ *command = device | ((len - 1) << 26) | (value << 16) | (addr << 8) | chip_addr;
if (op != 0)
- command = command | 0x03000000;
+ *command = *command | 0x03000000;
else
- command = command | 0x01000000;
-
- return command;
+ *command = *command | 0x01000000;
}
-u32 FlexI2cRead4(struct adapter * adapter, u32 device, u32 chip_addr, u16 addr, u8 * buf, u8 len)
+static int FlexI2cRead4(struct adapter * adapter, u32 device, u32 chip_addr, u16 addr, u8 * buf, u8 len)
{
u32 command;
u32 value;
int result, i;
- command = i2cMainSetup(device, chip_addr, 1, addr, 0, len);
+ i2cMainSetup(device, chip_addr, 1, addr, 0, len, &command);
result = i2cMainWriteForFlex2(adapter, command, buf, 100000);
@@ -226,7 +184,7 @@
return result;
}
-u32 FlexI2cWrite4(struct adapter * adapter, u32 device, u32 chip_addr, u32 addr, u8 * buf, u8 len)
+static int FlexI2cWrite4(struct adapter * adapter, u32 device, u32 chip_addr, u32 addr, u8 * buf, u8 len)
{
u32 command;
u32 value;
@@ -243,22 +201,22 @@
WriteRegDW(adapter, 0x104, value);
}
- command = i2cMainSetup(device, chip_addr, 0, addr, buf[0], len);
+ i2cMainSetup(device, chip_addr, 0, addr, buf[0], len, &command);
return i2cMainWriteForFlex2(adapter, command, 0, 100000);
}
-u32 fixChipAddr(u32 device, u32 bus, u32 addr)
+static void fixchipaddr(u32 device, u32 bus, u32 addr, u32 *ret)
{
if (device == 0x20000000)
- return bus | ((addr >> 8) & 3);
+ *ret = bus | ((addr >> 8) & 3);
- return bus;
+ *ret = bus;
}
-u32 FLEXI2C_read(struct adapter * adapter, u32 device, u32 bus, u32 addr, u8 * buf, u32 len)
+static u32 FLEXI2C_read(struct adapter * adapter, u32 device, u32 bus, u32 addr, u8 * buf, u32 len)
{
- u32 ChipAddr;
+ u32 chipaddr;
u32 bytes_to_transfer;
u8 *start;
@@ -272,9 +230,9 @@
if (bytes_to_transfer > 4)
bytes_to_transfer = 4;
- ChipAddr = fixChipAddr(device, bus, addr);
+ fixchipaddr(device, bus, addr, &chipaddr);
- if (FlexI2cRead4(adapter, device, ChipAddr, addr, buf, bytes_to_transfer) == 0)
+ if (FlexI2cRead4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0)
return buf - start;
buf = buf + bytes_to_transfer;
@@ -285,9 +243,9 @@
return buf - start;
}
-u32 FLEXI2C_write(struct adapter * adapter, u32 device, u32 bus, u32 addr, u8 * buf, u32 len)
+static u32 FLEXI2C_write(struct adapter * adapter, u32 device, u32 bus, u32 addr, u8 * buf, u32 len)
{
- u32 ChipAddr;
+ u32 chipaddr;
u32 bytes_to_transfer;
u8 *start;
@@ -301,9 +259,9 @@
if (bytes_to_transfer > 4)
bytes_to_transfer = 4;
- ChipAddr = fixChipAddr(device, bus, addr);
+ fixchipaddr(device, bus, addr, &chipaddr);
- if (FlexI2cWrite4(adapter, device, ChipAddr, addr, buf, bytes_to_transfer) == 0)
+ if (FlexI2cWrite4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0)
return buf - start;
buf = buf + bytes_to_transfer;
@@ -329,7 +287,8 @@
printk("message %d: flags=%x, addr=0x%04x, buf=%x, len=%d \n", i, msgs[i].flags, msgs[i].addr, (u32) msgs[i].buf, msgs[i].len);
}
}
- // allow only the vp310 frontend to access the bus
+
+ /* allow only the vp310 frontend to access the bus */
if ((msgs[0].addr != 0x0E) && (msgs[0].addr != 0x61)) {
up(&tmp->i2c_sem);
@@ -370,18 +329,15 @@
up(&tmp->i2c_sem);
- // master xfer functions always return the number of successfully
- // transmitted messages, not the number of transmitted bytes.
- // return -EREMOTEIO in case of failure.
+ /* master xfer functions always return the number of successfully
+ transmitted messages, not the number of transmitted bytes.
+ return -EREMOTEIO in case of failure. */
return ret;
}
-/////////////////////////////////////////////////////////////////////
-// SRAM (Skystar2 rev2.3 has one "ISSI IS61LV256" chip on board,
-// but it seems that FlexCopII can work with more than one chip)
-/////////////////////////////////////////////////////////////////////
-
-u32 SRAMSetNetDest(struct adapter * adapter, u8 dest)
+/* SRAM (Skystar2 rev2.3 has one "ISSI IS61LV256" chip on board,
+ but it seems that FlexCopII can work with more than one chip) */
+static void SRAMSetNetDest(struct adapter * adapter, u8 dest)
{
u32 tmp;
@@ -396,10 +352,11 @@
udelay(1000);
- return tmp;
+ /* return value is never used? */
+/* return tmp; */
}
-u32 SRAMSetCaiDest(struct adapter * adapter, u8 dest)
+static void SRAMSetCaiDest(struct adapter * adapter, u8 dest)
{
u32 tmp;
@@ -415,10 +372,11 @@
udelay(1000);
- return tmp;
+ /* return value is never used? */
+/* return tmp; */
}
-u32 SRAMSetCaoDest(struct adapter * adapter, u8 dest)
+static void SRAMSetCaoDest(struct adapter * adapter, u8 dest)
{
u32 tmp;
@@ -434,10 +392,11 @@
udelay(1000);
- return tmp;
+ /* return value is never used? */
+/* return tmp; */
}
-u32 SRAMSetMediaDest(struct adapter * adapter, u8 dest)
+static void SRAMSetMediaDest(struct adapter * adapter, u8 dest)
{
u32 tmp;
@@ -453,21 +412,20 @@
udelay(1000);
- return tmp;
+ /* return value is never used? */
+/* return tmp; */
}
-/////////////////////////////////////////////////////////////////////
-// SRAM memory is accessed through a buffer register in the FlexCop
-// chip (0x700). This register has the following structure:
-// bits 0-14 : address
-// bit 15 : read/write flag
-// bits 16-23 : 8-bit word to write
-// bits 24-27 : = 4
-// bits 28-29 : memory bank selector
-// bit 31 : busy flag
-////////////////////////////////////////////////////////////////////
-
-void FlexSramWrite(struct adapter *adapter, u32 bank, u32 addr, u8 * buf, u32 len)
+/* SRAM memory is accessed through a buffer register in the FlexCop
+ chip (0x700). This register has the following structure:
+ bits 0-14 : address
+ bit 15 : read/write flag
+ bits 16-23 : 8-bit word to write
+ bits 24-27 : = 4
+ bits 28-29 : memory bank selector
+ bit 31 : busy flag
+*/
+static void FlexSramWrite(struct adapter *adapter, u32 bank, u32 addr, u8 * buf, u32 len)
{
u32 i, command, retries;
@@ -477,7 +435,7 @@
retries = 2;
while (((ReadRegDW(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
- linuxdelayms(1);
+ mdelay(1);
retries--;
};
@@ -491,7 +449,7 @@
}
}
-void FlexSramRead(struct adapter *adapter, u32 bank, u32 addr, u8 * buf, u32 len)
+static void FlexSramRead(struct adapter *adapter, u32 bank, u32 addr, u8 * buf, u32 len)
{
u32 i, command, value, retries;
@@ -501,7 +459,7 @@
retries = 10000;
while (((ReadRegDW(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
- linuxdelayms(1);
+ mdelay(1);
retries--;
};
@@ -513,7 +471,7 @@
retries = 10000;
while (((ReadRegDW(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
- linuxdelayms(1);
+ mdelay(1);
retries--;
};
@@ -529,7 +487,7 @@
}
}
-void SRAM_writeChunk(struct adapter *adapter, u32 addr, u8 * buf, u16 len)
+static void SRAM_writeChunk(struct adapter *adapter, u32 addr, u8 * buf, u16 len)
{
u32 bank;
@@ -549,7 +507,7 @@
FlexSramWrite(adapter, bank, addr & 0x7FFF, buf, len);
}
-void SRAM_readChunk(struct adapter *adapter, u32 addr, u8 * buf, u16 len)
+static void SRAM_readChunk(struct adapter *adapter, u32 addr, u8 * buf, u16 len)
{
u32 bank;
@@ -569,7 +527,7 @@
FlexSramRead(adapter, bank, addr & 0x7FFF, buf, len);
}
-void SRAM_read(struct adapter *adapter, u32 addr, u8 * buf, u32 len)
+static void SRAM_read(struct adapter *adapter, u32 addr, u8 * buf, u32 len)
{
u32 length;
@@ -591,7 +549,7 @@
}
}
-void SRAM_write(struct adapter *adapter, u32 addr, u8 * buf, u32 len)
+static void SRAM_write(struct adapter *adapter, u32 addr, u8 * buf, u32 len)
{
u32 length;
@@ -613,12 +571,12 @@
}
}
-void SRAM_setSize(struct adapter *adapter, u32 mask)
+static void SRAM_setSize(struct adapter *adapter, u32 mask)
{
WriteRegDW(adapter, 0x71C, (mask | (~0x30000 & ReadRegDW(adapter, 0x71C))));
}
-u32 SRAM_init(struct adapter *adapter)
+static void SRAM_init(struct adapter *adapter)
{
u32 tmp;
@@ -640,10 +598,11 @@
dprintk("%s: dwSramType = %x\n", __FUNCTION__, adapter->dwSramType);
}
- return adapter->dwSramType;
+ /* return value is never used? */
+/* return adapter->dwSramType; */
}
-int SRAM_testLocation(struct adapter *adapter, u32 mask, u32 addr)
+static int SRAM_testLocation(struct adapter *adapter, u32 mask, u32 addr)
{
u8 tmp1, tmp2;
@@ -660,7 +619,7 @@
tmp2 = 0;
- linuxdelayms(20);
+ mdelay(20);
SRAM_read(adapter, addr, &tmp2, 1);
SRAM_read(adapter, addr, &tmp2, 1);
@@ -678,7 +637,7 @@
tmp2 = 0;
- linuxdelayms(20);
+ mdelay(20);
SRAM_read(adapter, addr, &tmp2, 1);
SRAM_read(adapter, addr, &tmp2, 1);
@@ -691,7 +650,7 @@
return 1;
}
-u32 SRAM_length(struct adapter * adapter)
+static u32 SRAM_length(struct adapter * adapter)
{
if (adapter->dwSramType == 0x10000)
return 32768; // 32K
@@ -703,22 +662,20 @@
return 32768; // 32K
}
-//////////////////////////////////////////////////////////////////////
-// FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
-// - for 128K there are 4x32K chips at bank 0,1,2,3.
-// - for 64K there are 2x32K chips at bank 1,2.
-// - for 32K there is one 32K chip at bank 0.
-//
-// FlexCop works only with one bank at a time. The bank is selected
-// by bits 28-29 of the 0x700 register.
-//
-// bank 0 covers addresses 0x00000-0x07FFF
-// bank 1 covers addresses 0x08000-0x0FFFF
-// bank 2 covers addresses 0x10000-0x17FFF
-// bank 3 covers addresses 0x18000-0x1FFFF
-/////////////////////////////////////////////////////////////////////
-
-int SramDetectForFlex2(struct adapter *adapter)
+/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
+ - for 128K there are 4x32K chips at bank 0,1,2,3.
+ - for 64K there are 2x32K chips at bank 1,2.
+ - for 32K there is one 32K chip at bank 0.
+
+ FlexCop works only with one bank at a time. The bank is selected
+ by bits 28-29 of the 0x700 register.
+
+ bank 0 covers addresses 0x00000-0x07FFF
+ bank 1 covers addresses 0x08000-0x0FFFF
+ bank 2 covers addresses 0x10000-0x17FFF
+ bank 3 covers addresses 0x18000-0x1FFFF
+*/
+static int SramDetectForFlex2(struct adapter *adapter)
{
u32 tmp, tmp2, tmp3;
@@ -790,21 +747,19 @@
return 0;
}
-void SLL_detectSramSize(struct adapter *adapter)
+static void SLL_detectSramSize(struct adapter *adapter)
{
SramDetectForFlex2(adapter);
}
-
-/////////////////////////////////////////////////////////////////////
-// EEPROM (Skystar2 has one "24LC08B" chip on board)
-////////////////////////////////////////////////////////////////////
-
-int EEPROM_write(struct adapter *adapter, u16 addr, u8 * buf, u16 len)
+/* EEPROM (Skystar2 has one "24LC08B" chip on board) */
+/*
+static int EEPROM_write(struct adapter *adapter, u16 addr, u8 * buf, u16 len)
{
return FLEXI2C_write(adapter, 0x20000000, 0x50, addr, buf, len);
}
+*/
-int EEPROM_read(struct adapter *adapter, u16 addr, u8 * buf, u16 len)
+static int EEPROM_read(struct adapter *adapter, u16 addr, u8 * buf, u16 len)
{
return FLEXI2C_read(adapter, 0x20000000, 0x50, addr, buf, len);
}
@@ -822,7 +777,7 @@
return sum;
}
-int EEPROM_LRC_read(struct adapter *adapter, u32 addr, u32 len, u8 * buf, u32 retries)
+static int EEPROM_LRC_read(struct adapter *adapter, u32 addr, u32 len, u8 * buf, u32 retries)
{
int i;
@@ -836,7 +791,8 @@
return 0;
}
-int EEPROM_LRC_write(struct adapter *adapter, u32 addr, u32 len, u8 * wbuf, u8 * rbuf, u32 retries)
+/*
+static int EEPROM_LRC_write(struct adapter *adapter, u32 addr, u32 len, u8 * wbuf, u8 * rbuf, u32 retries)
{
int i;
@@ -849,35 +805,35 @@
return 0;
}
+*/
+
+/* These functions could be called from the initialization routine
+ to unlock SkyStar2 cards, locked by "Europe On Line".
+
+ in cards from "Europe On Line" the key is:
-/////////////////////////////////////////////////////////////////////
-// These functions could be called from the initialization routine
-// to unlock SkyStar2 cards, locked by "Europe On Line".
-//
-// in cards from "Europe On Line" the key is:
-//
-// u8 key[20] = {
-// 0xB2, 0x01, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// };
-//
-// LRC = 0xB3;
-//
-// in unlocked cards the key is:
-//
-// u8 key[20] = {
-// 0xB2, 0x00, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// 0x00, 0x00, 0x00, 0x00,
-// };
-//
-// LRC = 0xB2;
-/////////////////////////////////////////////////////////////////////
+ u8 key[20] = {
+ 0xB2, 0x01, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ };
+
+ LRC = 0xB3;
-int EEPROM_writeKey(struct adapter *adapter, u8 * key, u32 len)
+ in unlocked cards the key is:
+
+ u8 key[20] = {
+ 0xB2, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ };
+
+ LRC = 0xB2;
+*/
+/*
+static int EEPROM_writeKey(struct adapter *adapter, u8 * key, u32 len)
{
u8 rbuf[20];
u8 wbuf[20];
@@ -894,8 +850,8 @@
return EEPROM_LRC_write(adapter, 0x3E4, 20, wbuf, rbuf, 4);
}
-
-int EEPROM_readKey(struct adapter *adapter, u8 * key, u32 len)
+*/
+static int EEPROM_readKey(struct adapter *adapter, u8 * key, u32 len)
{
u8 buf[20];
@@ -910,7 +866,7 @@
return 1;
}
-int EEPROM_getMacAddr(struct adapter *adapter, char type, u8 * mac)
+static int EEPROM_getMacAddr(struct adapter *adapter, char type, u8 * mac)
{
u8 tmp[8];
@@ -951,7 +907,8 @@
}
}
-char EEPROM_setMacAddr(struct adapter *adapter, char type, u8 * mac)
+/*
+static char EEPROM_setMacAddr(struct adapter *adapter, char type, u8 * mac)
{
u8 tmp[8];
@@ -981,12 +938,10 @@
return 0;
}
+*/
-/////////////////////////////////////////////////////////////////////
-// PID filter
-/////////////////////////////////////////////////////////////////////
-
-void FilterEnableStream1Filter(struct adapter *adapter, u32 op)
+/* PID filter */
+static void FilterEnableStream1Filter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -999,7 +954,7 @@
}
}
-void FilterEnableStream2Filter(struct adapter *adapter, u32 op)
+static void FilterEnableStream2Filter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1012,7 +967,7 @@
}
}
-void FilterEnablePcrFilter(struct adapter *adapter, u32 op)
+static void FilterEnablePcrFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1025,7 +980,7 @@
}
}
-void FilterEnablePmtFilter(struct adapter *adapter, u32 op)
+static void FilterEnablePmtFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1038,7 +993,7 @@
}
}
-void FilterEnableEmmFilter(struct adapter *adapter, u32 op)
+static void FilterEnableEmmFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1051,7 +1006,7 @@
}
}
-void FilterEnableEcmFilter(struct adapter *adapter, u32 op)
+static void FilterEnableEcmFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1064,7 +1019,8 @@
}
}
-void FilterEnableNullFilter(struct adapter *adapter, u32 op)
+/*
+static void FilterEnableNullFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1076,8 +1032,9 @@
WriteRegOp(adapter, 0x208, 1, 0, 0x00000040);
}
}
+*/
-void FilterEnableMaskFilter(struct adapter *adapter, u32 op)
+static void FilterEnableMaskFilter(struct adapter *adapter, u32 op)
{
dprintk("%s: op=%x\n", __FUNCTION__, op);
@@ -1091,7 +1048,7 @@
}
-void CtrlEnableMAC(struct adapter *adapter, u32 op)
+static void CtrlEnableMAC(struct adapter *adapter, u32 op)
{
if (op == 0) {
WriteRegOp(adapter, 0x208, 2, ~0x00004000, 0);
@@ -1102,7 +1059,7 @@
}
}
-int CASetMacDstAddrFilter(struct adapter *adapter, u8 * mac)
+static int CASetMacDstAddrFilter(struct adapter *adapter, u8 * mac)
{
u32 tmp1, tmp2;
@@ -1115,7 +1072,8 @@
return 0;
}
-void SetIgnoreMACFilter(struct adapter *adapter, u8 op)
+/*
+static void SetIgnoreMACFilter(struct adapter *adapter, u8 op)
{
if (op != 0) {
WriteRegOp(adapter, 0x208, 2, ~0x00004000, 0);
@@ -1131,14 +1089,17 @@
}
}
}
+*/
-void CheckNullFilterEnable(struct adapter *adapter)
+/*
+static void CheckNullFilterEnable(struct adapter *adapter)
{
FilterEnableNullFilter(adapter, 1);
FilterEnableMaskFilter(adapter, 1);
}
+*/
-void InitPIDsInfo(struct adapter *adapter)
+static void InitPIDsInfo(struct adapter *adapter)
{
int i;
@@ -1146,7 +1107,7 @@
adapter->pids[i] = 0x1FFF;
}
-u32 CheckPID(struct adapter *adapter, u16 pid)
+static int CheckPID(struct adapter *adapter, u16 pid)
{
u32 i;
@@ -1161,7 +1122,7 @@
return 0;
}
-u32 PidSetGroupPID(struct adapter * adapter, u32 pid)
+static void PidSetGroupPID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1171,10 +1132,11 @@
WriteRegDW(adapter, 0x30C, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetGroupMASK(struct adapter * adapter, u32 pid)
+static void PidSetGroupMASK(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1184,10 +1146,11 @@
WriteRegDW(adapter, 0x30C, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetStream1PID(struct adapter * adapter, u32 pid)
+static void PidSetStream1PID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1197,10 +1160,11 @@
WriteRegDW(adapter, 0x300, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetStream2PID(struct adapter * adapter, u32 pid)
+static void PidSetStream2PID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1210,10 +1174,11 @@
WriteRegDW(adapter, 0x300, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetPcrPID(struct adapter * adapter, u32 pid)
+static void PidSetPcrPID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1223,10 +1188,11 @@
WriteRegDW(adapter, 0x304, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetPmtPID(struct adapter * adapter, u32 pid)
+static void PidSetPmtPID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1236,10 +1202,11 @@
WriteRegDW(adapter, 0x304, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetEmmPID(struct adapter * adapter, u32 pid)
+static void PidSetEmmPID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1249,10 +1216,11 @@
WriteRegDW(adapter, 0x308, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidSetEcmPID(struct adapter * adapter, u32 pid)
+static void PidSetEcmPID(struct adapter * adapter, u32 pid)
{
u32 value;
@@ -1262,50 +1230,52 @@
WriteRegDW(adapter, 0x308, value);
- return value;
+ /* return value is never used? */
+/* return value; */
}
-u32 PidGetStream1PID(struct adapter * adapter)
+static int PidGetStream1PID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x300) & 0x0000FFFF;
+ return ReadRegDW(adapter, 0x300) & 0x00001FFF;
}
-u32 PidGetStream2PID(struct adapter * adapter)
+static int PidGetStream2PID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x300) >> 0x10;
+ return (ReadRegDW(adapter, 0x300) >> 0x10)& 0x00001FFF;
}
-u32 PidGetPcrPID(struct adapter * adapter)
+static int PidGetPcrPID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x304) & 0x0000FFFF;
+ return ReadRegDW(adapter, 0x304) & 0x00001FFF;
}
-u32 PidGetPmtPID(struct adapter * adapter)
+static int PidGetPmtPID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x304) >> 0x10;
+ return (ReadRegDW(adapter, 0x304) >> 0x10)& 0x00001FFF;
}
-u32 PidGetEmmPID(struct adapter * adapter)
+static int PidGetEmmPID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x308) & 0x0000FFFF;
+ return ReadRegDW(adapter, 0x308) & 0x00001FFF;
}
-u32 PidGetEcmPID(struct adapter * adapter)
+static int PidGetEcmPID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x308) >> 0x10;
+ return (ReadRegDW(adapter, 0x308) >> 0x10)& 0x00001FFF;
}
-u32 PidGetGroupPID(struct adapter * adapter)
+static int PidGetGroupPID(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x30C) & 0x0000FFFF;
+ return ReadRegDW(adapter, 0x30C) & 0x00001FFF;
}
-u32 PidGetGroupMASK(struct adapter * adapter)
+static int PidGetGroupMASK(struct adapter * adapter)
{
- return ReadRegDW(adapter, 0x30C) >> 0x10;
+ return (ReadRegDW(adapter, 0x30C) >> 0x10)& 0x00001FFF;
}
-void ResetHardwarePIDFilter(struct adapter *adapter)
+/*
+static void ResetHardwarePIDFilter(struct adapter *adapter)
{
PidSetStream1PID(adapter, 0x1FFF);
@@ -1324,8 +1294,9 @@
PidSetEmmPID(adapter, 0x1FFF);
FilterEnableEmmFilter(adapter, 0);
}
+*/
-void OpenWholeBandwidth(struct adapter *adapter)
+static void OpenWholeBandwidth(struct adapter *adapter)
{
PidSetGroupPID(adapter, 0);
@@ -1334,7 +1305,7 @@
FilterEnableMaskFilter(adapter, 1);
}
-int AddHwPID(struct adapter *adapter, u32 pid)
+static int AddHwPID(struct adapter *adapter, u32 pid)
{
dprintk("%s: pid=%d\n", __FUNCTION__, pid);
@@ -1344,7 +1315,7 @@
if ((PidGetGroupMASK(adapter) == 0) && (PidGetGroupPID(adapter) == 0))
return 0;
- if ((PidGetStream1PID(adapter) & 0x1FFF) == 0x1FFF) {
+ if (PidGetStream1PID(adapter) == 0x1FFF) {
PidSetStream1PID(adapter, pid & 0xFFFF);
FilterEnableStream1Filter(adapter, 1);
@@ -1352,7 +1323,7 @@
return 1;
}
- if ((PidGetStream2PID(adapter) & 0x1FFF) == 0x1FFF) {
+ if (PidGetStream2PID(adapter) == 0x1FFF) {
PidSetStream2PID(adapter, (pid & 0xFFFF));
FilterEnableStream2Filter(adapter, 1);
@@ -1360,7 +1331,7 @@
return 1;
}
- if ((PidGetPcrPID(adapter) & 0x1FFF) == 0x1FFF) {
+ if (PidGetPcrPID(adapter) == 0x1FFF) {
PidSetPcrPID(adapter, (pid & 0xFFFF));
FilterEnablePcrFilter(adapter, 1);
@@ -1395,20 +1366,20 @@
return -1;
}
-int RemoveHwPID(struct adapter *adapter, u32 pid)
+static int RemoveHwPID(struct adapter *adapter, u32 pid)
{
dprintk("%s: pid=%d\n", __FUNCTION__, pid);
if (pid <= 0x1F)
return 1;
- if ((PidGetStream1PID(adapter) & 0x1FFF) == pid) {
+ if (PidGetStream1PID(adapter) == pid) {
PidSetStream1PID(adapter, 0x1FFF);
return 1;
}
- if ((PidGetStream2PID(adapter) & 0x1FFF) == pid) {
+ if (PidGetStream2PID(adapter) == pid) {
PidSetStream2PID(adapter, 0x1FFF);
FilterEnableStream2Filter(adapter, 0);
@@ -1416,7 +1387,7 @@
return 1;
}
- if ((PidGetPcrPID(adapter) & 0x1FFF) == pid) {
+ if (PidGetPcrPID(adapter) == pid) {
PidSetPcrPID(adapter, 0x1FFF);
FilterEnablePcrFilter(adapter, 0);
@@ -1424,7 +1395,7 @@
return 1;
}
- if ((PidGetPmtPID(adapter) & 0x1FFF) == pid) {
+ if (PidGetPmtPID(adapter) == pid) {
PidSetPmtPID(adapter, 0x1FFF);
FilterEnablePmtFilter(adapter, 0);
@@ -1432,7 +1403,7 @@
return 1;
}
- if ((PidGetEmmPID(adapter) & 0x1FFF) == pid) {
+ if (PidGetEmmPID(adapter) == pid) {
PidSetEmmPID(adapter, 0x1FFF);
FilterEnableEmmFilter(adapter, 0);
@@ -1440,7 +1411,7 @@
return 1;
}
- if ((PidGetEcmPID(adapter) & 0x1FFF) == pid) {
+ if (PidGetEcmPID(adapter) == pid) {
PidSetEcmPID(adapter, 0x1FFF);
FilterEnableEcmFilter(adapter, 0);
@@ -1451,7 +1422,7 @@
return -1;
}
-int AddPID(struct adapter *adapter, u32 pid)
+static int AddPID(struct adapter *adapter, u32 pid)
{
int i;
@@ -1478,7 +1449,7 @@
return -1;
}
-int RemovePID(struct adapter *adapter, u32 pid)
+static int RemovePID(struct adapter *adapter, u32 pid)
{
u32 i;
@@ -1500,11 +1471,8 @@
return -1;
}
-/////////////////////////////////////////////////////////////////////
-// DMA & IRQ
-/////////////////////////////////////////////////////////////////////
-
-void CtrlEnableSmc(struct adapter *adapter, u32 op)
+/* dma & irq */
+static void CtrlEnableSmc(struct adapter *adapter, u32 op)
{
if (op == 0) {
WriteRegOp(adapter, 0x208, 2, ~0x00000800, 0);
@@ -1515,7 +1483,7 @@
}
}
-u32 DmaEnableDisableIrq(struct adapter *adapter, u32 flag1, u32 flag2, u32 flag3)
+static void DmaEnableDisableIrq(struct adapter *adapter, u32 flag1, u32 flag2, u32 flag3)
{
adapter->dma_ctrl = adapter->dma_ctrl & 0x000F0000;
@@ -1542,11 +1510,9 @@
else
adapter->dma_ctrl = adapter->dma_ctrl | 0x00080000;
}
-
- return adapter->dma_ctrl;
}
-u32 IrqDmaEnableDisableIrq(struct adapter * adapter, u32 op)
+static void IrqDmaEnableDisableIrq(struct adapter * adapter, u32 op)
{
u32 value;
@@ -1556,52 +1522,46 @@
value = value | (adapter->dma_ctrl & 0x000F0000);
WriteRegDW(adapter, 0x208, value);
-
- return value;
}
-///////////////////////////////////////////////////////////////////////
-//
-// FlexCopII has 2 dma channels. DMA1 is used to transfer TS data to
-// system memory.
-//
-// The DMA1 buffer is divided in 2 subbuffers of equal size.
-// FlexCopII will transfer TS data to one subbuffer, signal an interrupt
-// when the subbuffer is full and continue fillig the second subbuffer.
-//
-// For DMA1:
-// subbuffer size in 32-bit words is stored in the first 24 bits of
-// register 0x004. The last 8 bits of register 0x004 contain the number
-// of subbuffers.
-//
-// the first 30 bits of register 0x000 contain the address of the first
-// subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
-// when dma1 is enabled.
-//
-// the first 30 bits of register 0x00C contain the address of the second
-// subbuffer. the last 2 bits contain 1.
-//
-// register 0x008 will contain the address of the subbuffer that was filled
-// with TS data, when FlexCopII will generate an interrupt.
-//
-// For DMA2:
-// subbuffer size in 32-bit words is stored in the first 24 bits of
-// register 0x014. The last 8 bits of register 0x014 contain the number
-// of subbuffers.
-//
-// the first 30 bits of register 0x010 contain the address of the first
-// subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
-// when dma1 is enabled.
-//
-// the first 30 bits of register 0x01C contain the address of the second
-// subbuffer. the last 2 bits contain 1.
-//
-// register 0x018 contains the address of the subbuffer that was filled
-// with TS data, when FlexCopII generates an interrupt.
-//
-///////////////////////////////////////////////////////////////////////
+/* FlexCopII has 2 dma channels. DMA1 is used to transfer TS data to
+ system memory.
-int DmaInitDMA(struct adapter *adapter, u32 dma_channel)
+ The DMA1 buffer is divided in 2 subbuffers of equal size.
+ FlexCopII will transfer TS data to one subbuffer, signal an interrupt
+ when the subbuffer is full and continue fillig the second subbuffer.
+
+ For DMA1:
+ subbuffer size in 32-bit words is stored in the first 24 bits of
+ register 0x004. The last 8 bits of register 0x004 contain the number
+ of subbuffers.
+
+ the first 30 bits of register 0x000 contain the address of the first
+ subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
+ when dma1 is enabled.
+
+ the first 30 bits of register 0x00C contain the address of the second
+ subbuffer. the last 2 bits contain 1.
+
+ register 0x008 will contain the address of the subbuffer that was filled
+ with TS data, when FlexCopII will generate an interrupt.
+
+ For DMA2:
+ subbuffer size in 32-bit words is stored in the first 24 bits of
+ register 0x014. The last 8 bits of register 0x014 contain the number
+ of subbuffers.
+
+ the first 30 bits of register 0x010 contain the address of the first
+ subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1,
+ when dma1 is enabled.
+
+ the first 30 bits of register 0x01C contain the address of the second
+ subbuffer. the last 2 bits contain 1.
+
+ register 0x018 contains the address of the subbuffer that was filled
+ with TS data, when FlexCopII generates an interrupt.
+*/
+static int DmaInitDMA(struct adapter *adapter, u32 dma_channel)
{
u32 subbuffers, subbufsize, subbuf0, subbuf1;
@@ -1610,11 +1570,11 @@
subbuffers = 2;
- subbufsize = (((adapter->DmaQ1.buffer_size / 2) / 4) << 8) | subbuffers;
+ subbufsize = (((adapter->dmaq1.buffer_size / 2) / 4) << 8) | subbuffers;
- subbuf0 = adapter->DmaQ1.bus_addr & 0xFFFFFFFC;
+ subbuf0 = adapter->dmaq1.bus_addr & 0xFFFFFFFC;
- subbuf1 = ((adapter->DmaQ1.bus_addr + adapter->DmaQ1.buffer_size / 2) & 0xFFFFFFFC) | 1;
+ subbuf1 = ((adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) & 0xFFFFFFFC) | 1;
dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0);
udelay(1000);
@@ -1628,8 +1588,8 @@
udelay(1000);
WriteRegDW(adapter, 0x00C, subbuf1);
- dprintk("%s: counter = 0x%x\n", __FUNCTION__, adapter->DmaQ1.bus_addr & 0xFFFFFFFC);
- WriteRegDW(adapter, 0x008, adapter->DmaQ1.bus_addr & 0xFFFFFFFC);
+ dprintk("%s: counter = 0x%x\n", __FUNCTION__, adapter->dmaq1.bus_addr & 0xFFFFFFFC);
+ WriteRegDW(adapter, 0x008, adapter->dmaq1.bus_addr & 0xFFFFFFFC);
udelay(1000);
if (subbuffers == 0)
@@ -1650,11 +1610,11 @@
subbuffers = 2;
- subbufsize = (((adapter->DmaQ2.buffer_size / 2) / 4) << 8) | subbuffers;
+ subbufsize = (((adapter->dmaq2.buffer_size / 2) / 4) << 8) | subbuffers;
- subbuf0 = adapter->DmaQ2.bus_addr & 0xFFFFFFFC;
+ subbuf0 = adapter->dmaq2.bus_addr & 0xFFFFFFFC;
- subbuf1 = ((adapter->DmaQ2.bus_addr + adapter->DmaQ2.buffer_size / 2) & 0xFFFFFFFC) | 1;
+ subbuf1 = ((adapter->dmaq2.bus_addr + adapter->dmaq2.buffer_size / 2) & 0xFFFFFFFC) | 1;
dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0);
udelay(1000);
@@ -1674,7 +1634,7 @@
return 0;
}
-void CtrlEnableReceiveData(struct adapter *adapter, u32 op)
+static void CtrlEnableReceiveData(struct adapter *adapter, u32 op)
{
if (op == 0) {
WriteRegOp(adapter, 0x208, 2, ~0x00008000, 0);
@@ -1689,11 +1649,10 @@
}
}
-///////////////////////////////////////////////////////////////////////////////
-// bit 0 of dma_mask is set to 1 if dma1 channel has to be enabled/disabled
-// bit 1 of dma_mask is set to 1 if dma2 channel has to be enabled/disabled
-
-void DmaStartStop0x2102(struct adapter *adapter, u32 dma_mask, u32 start_stop)
+/* bit 0 of dma_mask is set to 1 if dma1 channel has to be enabled/disabled
+ bit 1 of dma_mask is set to 1 if dma2 channel has to be enabled/disabled
+*/
+static void DmaStartStop0x2102(struct adapter *adapter, u32 dma_mask, u32 start_stop)
{
u32 dma_enable, dma1_enable, dma2_enable;
@@ -1705,20 +1664,20 @@
dma1_enable = 0;
dma2_enable = 0;
- if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) == 0) && (adapter->DmaQ1.bus_addr != 0)) {
+ if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) == 0) && (adapter->dmaq1.bus_addr != 0)) {
adapter->dma_status = adapter->dma_status | 1;
dma1_enable = 1;
}
- if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) == 0) && (adapter->DmaQ2.bus_addr != 0)) {
+ if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) == 0) && (adapter->dmaq2.bus_addr != 0)) {
adapter->dma_status = adapter->dma_status | 2;
dma2_enable = 1;
}
// enable dma1 and dma2
if ((dma1_enable == 1) && (dma2_enable == 1)) {
- WriteRegDW(adapter, 0x000, adapter->DmaQ1.bus_addr | 1);
- WriteRegDW(adapter, 0x00C, (adapter->DmaQ1.bus_addr + adapter->DmaQ1.buffer_size / 2) | 1);
- WriteRegDW(adapter, 0x010, adapter->DmaQ2.bus_addr | 1);
+ WriteRegDW(adapter, 0x000, adapter->dmaq1.bus_addr | 1);
+ WriteRegDW(adapter, 0x00C, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
+ WriteRegDW(adapter, 0x010, adapter->dmaq2.bus_addr | 1);
CtrlEnableReceiveData(adapter, 1);
@@ -1726,8 +1685,8 @@
}
// enable dma1
if ((dma1_enable == 1) && (dma2_enable == 0)) {
- WriteRegDW(adapter, 0x000, adapter->DmaQ1.bus_addr | 1);
- WriteRegDW(adapter, 0x00C, (adapter->DmaQ1.bus_addr + adapter->DmaQ1.buffer_size / 2) | 1);
+ WriteRegDW(adapter, 0x000, adapter->dmaq1.bus_addr | 1);
+ WriteRegDW(adapter, 0x00C, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
CtrlEnableReceiveData(adapter, 1);
@@ -1735,7 +1694,7 @@
}
// enable dma2
if ((dma1_enable == 0) && (dma2_enable == 1)) {
- WriteRegDW(adapter, 0x010, adapter->DmaQ2.bus_addr | 1);
+ WriteRegDW(adapter, 0x010, adapter->dmaq2.bus_addr | 1);
CtrlEnableReceiveData(adapter, 1);
@@ -1768,22 +1727,22 @@
udelay(3000);
}
//disable dma1
- if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0) && (adapter->DmaQ1.bus_addr != 0)) {
- WriteRegDW(adapter, 0x000, adapter->DmaQ1.bus_addr);
- WriteRegDW(adapter, 0x00C, (adapter->DmaQ1.bus_addr + adapter->DmaQ1.buffer_size / 2) | 1);
+ if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0) && (adapter->dmaq1.bus_addr != 0)) {
+ WriteRegDW(adapter, 0x000, adapter->dmaq1.bus_addr);
+ WriteRegDW(adapter, 0x00C, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1);
adapter->dma_status = adapter->dma_status & ~0x00000001;
}
//disable dma2
- if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0) && (adapter->DmaQ2.bus_addr != 0)) {
- WriteRegDW(adapter, 0x010, adapter->DmaQ2.bus_addr);
+ if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0) && (adapter->dmaq2.bus_addr != 0)) {
+ WriteRegDW(adapter, 0x010, adapter->dmaq2.bus_addr);
adapter->dma_status = adapter->dma_status & ~0x00000002;
}
}
}
-void OpenStream(struct adapter *adapter, u32 pid)
+static void OpenStream(struct adapter *adapter, u32 pid)
{
u32 dma_mask;
@@ -1802,17 +1761,17 @@
if (((adapter->dma_status & 0x10000000) != 0) && ((adapter->dma_status & 1) == 0)) {
dma_mask = dma_mask | 1;
- adapter->DmaQ1.head = 0;
- adapter->DmaQ1.tail = 0;
+ adapter->dmaq1.head = 0;
+ adapter->dmaq1.tail = 0;
- memset(adapter->DmaQ1.buffer, 0, adapter->DmaQ1.buffer_size);
+ memset(adapter->dmaq1.buffer, 0, adapter->dmaq1.buffer_size);
}
if (((adapter->dma_status & 0x20000000) != 0) && ((adapter->dma_status & 2) == 0)) {
dma_mask = dma_mask | 2;
- adapter->DmaQ2.head = 0;
- adapter->DmaQ2.tail = 0;
+ adapter->dmaq2.head = 0;
+ adapter->dmaq2.tail = 0;
}
if (dma_mask != 0) {
@@ -1823,7 +1782,7 @@
}
}
-void CloseStream(struct adapter *adapter, u32 pid)
+static void CloseStream(struct adapter *adapter, u32 pid)
{
u32 dma_mask;
@@ -1846,10 +1805,10 @@
RemovePID(adapter, pid);
}
-u32 InterruptServiceDMA1(struct adapter *adapter)
+static void InterruptServiceDMA1(struct adapter *adapter)
{
struct dvb_demux *dvbdmx = &adapter->demux;
- struct packet_header_t packet_header;
+ struct packet_header packet_header;
int nCurDmaCounter;
u32 nNumBytesParsed;
@@ -1858,40 +1817,39 @@
u8 gbTmpBuffer[188];
u8 *pbDMABufCurPos;
- nCurDmaCounter = readl(adapter->io_mem + 0x008) - adapter->DmaQ1.bus_addr;
+ nCurDmaCounter = readl(adapter->io_mem + 0x008) - adapter->dmaq1.bus_addr;
nCurDmaCounter = (nCurDmaCounter / dwDefaultPacketSize) * dwDefaultPacketSize;
- if ((nCurDmaCounter < 0) || (nCurDmaCounter > adapter->DmaQ1.buffer_size)) {
+ if ((nCurDmaCounter < 0) || (nCurDmaCounter > adapter->dmaq1.buffer_size)) {
dprintk("%s: dma counter outside dma buffer\n", __FUNCTION__);
-
- return 1;
+ return;
}
- adapter->DmaQ1.head = nCurDmaCounter;
+ adapter->dmaq1.head = nCurDmaCounter;
- if (adapter->DmaQ1.tail <= nCurDmaCounter) {
- nNumNewBytesTransferred = nCurDmaCounter - adapter->DmaQ1.tail;
+ if (adapter->dmaq1.tail <= nCurDmaCounter) {
+ nNumNewBytesTransferred = nCurDmaCounter - adapter->dmaq1.tail;
} else {
- nNumNewBytesTransferred = (adapter->DmaQ1.buffer_size - adapter->DmaQ1.tail) + nCurDmaCounter;
+ nNumNewBytesTransferred = (adapter->dmaq1.buffer_size - adapter->dmaq1.tail) + nCurDmaCounter;
}
// dprintk("%s: nCurDmaCounter = %d\n" , __FUNCTION__, nCurDmaCounter);
-// dprintk("%s: DmaQ1.tail = %d\n" , __FUNCTION__, adapter->DmaQ1.tail):
+// dprintk("%s: dmaq1.tail = %d\n" , __FUNCTION__, adapter->dmaq1.tail):
// dprintk("%s: BytesTransferred = %d\n" , __FUNCTION__, nNumNewBytesTransferred);
if (nNumNewBytesTransferred < dwDefaultPacketSize)
- return 0;
+ return;
nNumBytesParsed = 0;
while (nNumBytesParsed < nNumNewBytesTransferred) {
- pbDMABufCurPos = adapter->DmaQ1.buffer + adapter->DmaQ1.tail;
+ pbDMABufCurPos = adapter->dmaq1.buffer + adapter->dmaq1.tail;
- if (adapter->DmaQ1.buffer + adapter->DmaQ1.buffer_size < adapter->DmaQ1.buffer + adapter->DmaQ1.tail + 188) {
- memcpy(gbTmpBuffer, adapter->DmaQ1.buffer + adapter->DmaQ1.tail, adapter->DmaQ1.buffer_size - adapter->DmaQ1.tail);
- memcpy(gbTmpBuffer + (adapter->DmaQ1.buffer_size - adapter->DmaQ1.tail), adapter->DmaQ1.buffer, (188 - (adapter->DmaQ1.buffer_size - adapter->DmaQ1.tail)));
+ if (adapter->dmaq1.buffer + adapter->dmaq1.buffer_size < adapter->dmaq1.buffer + adapter->dmaq1.tail + 188) {
+ memcpy(gbTmpBuffer, adapter->dmaq1.buffer + adapter->dmaq1.tail, adapter->dmaq1.buffer_size - adapter->dmaq1.tail);
+ memcpy(gbTmpBuffer + (adapter->dmaq1.buffer_size - adapter->dmaq1.tail), adapter->dmaq1.buffer, (188 - (adapter->dmaq1.buffer_size - adapter->dmaq1.tail)));
pbDMABufCurPos = gbTmpBuffer;
}
@@ -1921,21 +1879,19 @@
nNumBytesParsed = nNumBytesParsed + dwDefaultPacketSize;
- adapter->DmaQ1.tail = adapter->DmaQ1.tail + dwDefaultPacketSize;
+ adapter->dmaq1.tail = adapter->dmaq1.tail + dwDefaultPacketSize;
- if (adapter->DmaQ1.tail >= adapter->DmaQ1.buffer_size)
- adapter->DmaQ1.tail = adapter->DmaQ1.tail - adapter->DmaQ1.buffer_size;
+ if (adapter->dmaq1.tail >= adapter->dmaq1.buffer_size)
+ adapter->dmaq1.tail = adapter->dmaq1.tail - adapter->dmaq1.buffer_size;
};
-
- return 1;
}
-void InterruptServiceDMA2(struct adapter *adapter)
+static void InterruptServiceDMA2(struct adapter *adapter)
{
printk("%s:\n", __FUNCTION__);
}
-void isr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t isr(int irq, void *dev_id, struct pt_regs *regs)
{
struct adapter *tmp = dev_id;
@@ -1945,67 +1901,73 @@
spin_lock_irq(&tmp->lock);
- while (((value = ReadRegDW(tmp, 0x20C)) & 0x0F) != 0) {
+ if (0 == ((value = ReadRegDW(tmp, 0x20C)) & 0x0F)) {
+ spin_unlock_irq(&tmp->lock);
+ return IRQ_NONE;
+ }
+
+ while (value != 0) {
if ((value & 0x03) != 0)
InterruptServiceDMA1(tmp);
if ((value & 0x0C) != 0)
InterruptServiceDMA2(tmp);
+ value = ReadRegDW(tmp, 0x20C) & 0x0F;
}
spin_unlock_irq(&tmp->lock);
+ return IRQ_HANDLED;
}
-
-void InitDmaQueue(struct adapter *adapter)
+static void Initdmaqueue(struct adapter *adapter)
{
dma_addr_t dma_addr;
- if (adapter->DmaQ1.buffer != 0)
+ if (adapter->dmaq1.buffer != 0)
return;
- adapter->DmaQ1.head = 0;
- adapter->DmaQ1.tail = 0;
- adapter->DmaQ1.buffer = 0;
+ adapter->dmaq1.head = 0;
+ adapter->dmaq1.tail = 0;
+ adapter->dmaq1.buffer = 0;
- adapter->DmaQ1.buffer = pci_alloc_consistent(adapter->pdev, SizeOfBufDMA1 + 0x80, &dma_addr);
+ adapter->dmaq1.buffer = pci_alloc_consistent(adapter->pdev, SizeOfBufDMA1 + 0x80, &dma_addr);
- if (adapter->DmaQ1.buffer != 0) {
- memset(adapter->DmaQ1.buffer, 0, SizeOfBufDMA1);
+ if (adapter->dmaq1.buffer != 0) {
+ memset(adapter->dmaq1.buffer, 0, SizeOfBufDMA1);
- adapter->DmaQ1.bus_addr = dma_addr;
- adapter->DmaQ1.buffer_size = SizeOfBufDMA1;
+ adapter->dmaq1.bus_addr = dma_addr;
+ adapter->dmaq1.buffer_size = SizeOfBufDMA1;
DmaInitDMA(adapter, 0);
adapter->dma_status = adapter->dma_status | 0x10000000;
- dprintk("%s: allocated dma buffer at 0x%x, length=%d\n", __FUNCTION__, (int) adapter->DmaQ1.buffer, SizeOfBufDMA1);
+ dprintk("%s: allocated dma buffer at 0x%x, length=%d\n", __FUNCTION__, (int) adapter->dmaq1.buffer, SizeOfBufDMA1);
} else {
adapter->dma_status = adapter->dma_status & ~0x10000000;
}
- if (adapter->DmaQ2.buffer != 0)
+ if (adapter->dmaq2.buffer != 0)
return;
- adapter->DmaQ2.head = 0;
- adapter->DmaQ2.tail = 0;
- adapter->DmaQ2.buffer = 0;
+ adapter->dmaq2.head = 0;
+ adapter->dmaq2.tail = 0;
+ adapter->dmaq2.buffer = 0;
- adapter->DmaQ2.buffer = pci_alloc_consistent(adapter->pdev, SizeOfBufDMA2 + 0x80, &dma_addr);
+ adapter->dmaq2.buffer = pci_alloc_consistent(adapter->pdev, SizeOfBufDMA2 + 0x80, &dma_addr);
- if (adapter->DmaQ2.buffer != 0) {
- memset(adapter->DmaQ2.buffer, 0, SizeOfBufDMA2);
+ if (adapter->dmaq2.buffer != 0) {
+ memset(adapter->dmaq2.buffer, 0, SizeOfBufDMA2);
- adapter->DmaQ2.bus_addr = dma_addr;
- adapter->DmaQ2.buffer_size = SizeOfBufDMA2;
+ adapter->dmaq2.bus_addr = dma_addr;
+ adapter->dmaq2.buffer_size = SizeOfBufDMA2;
DmaInitDMA(adapter, 1);
adapter->dma_status = adapter->dma_status | 0x20000000;
- dprintk("%s: allocated dma buffer at 0x%x, length=%d\n", __FUNCTION__, (int) adapter->DmaQ2.buffer, (int) SizeOfBufDMA2);
+ dprintk("%s: allocated dma buffer at 0x%x, length=%d\n", __FUNCTION__, (int) adapter->dmaq2.buffer, (int) SizeOfBufDMA2);
} else {
@@ -2013,30 +1975,30 @@
}
}
-void FreeDmaQueue(struct adapter *adapter)
+static void Freedmaqueue(struct adapter *adapter)
{
- if (adapter->DmaQ1.buffer != 0) {
- pci_free_consistent(adapter->pdev, SizeOfBufDMA1 + 0x80, adapter->DmaQ1.buffer, adapter->DmaQ1.bus_addr);
+ if (adapter->dmaq1.buffer != 0) {
+ pci_free_consistent(adapter->pdev, SizeOfBufDMA1 + 0x80, adapter->dmaq1.buffer, adapter->dmaq1.bus_addr);
- adapter->DmaQ1.bus_addr = 0;
- adapter->DmaQ1.head = 0;
- adapter->DmaQ1.tail = 0;
- adapter->DmaQ1.buffer_size = 0;
- adapter->DmaQ1.buffer = 0;
+ adapter->dmaq1.bus_addr = 0;
+ adapter->dmaq1.head = 0;
+ adapter->dmaq1.tail = 0;
+ adapter->dmaq1.buffer_size = 0;
+ adapter->dmaq1.buffer = 0;
}
- if (adapter->DmaQ2.buffer != 0) {
- pci_free_consistent(adapter->pdev, SizeOfBufDMA2 + 0x80, adapter->DmaQ2.buffer, adapter->DmaQ2.bus_addr);
+ if (adapter->dmaq2.buffer != 0) {
+ pci_free_consistent(adapter->pdev, SizeOfBufDMA2 + 0x80, adapter->dmaq2.buffer, adapter->dmaq2.bus_addr);
- adapter->DmaQ2.bus_addr = 0;
- adapter->DmaQ2.head = 0;
- adapter->DmaQ2.tail = 0;
- adapter->DmaQ2.buffer_size = 0;
- adapter->DmaQ2.buffer = 0;
+ adapter->dmaq2.bus_addr = 0;
+ adapter->dmaq2.head = 0;
+ adapter->dmaq2.tail = 0;
+ adapter->dmaq2.buffer_size = 0;
+ adapter->dmaq2.buffer = 0;
}
}
-void FreeAdapterObject(struct adapter *adapter)
+static void FreeAdapterObject(struct adapter *adapter)
{
dprintk("%s:\n", __FUNCTION__);
@@ -2045,7 +2007,7 @@
if (adapter->irq != 0)
free_irq(adapter->irq, adapter);
- FreeDmaQueue(adapter);
+ Freedmaqueue(adapter);
if (adapter->io_mem != 0)
iounmap((void *) adapter->io_mem);
@@ -2054,16 +2016,18 @@
kfree(adapter);
}
-int ClaimAdapter(struct adapter *adapter)
+static struct pci_driver skystar2_pci_driver;
+
+static int ClaimAdapter(struct adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
u16 var;
- if (!request_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1), pdev->name))
+ if (!request_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1), skystar2_pci_driver.name))
return -EBUSY;
- if (!request_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0), pdev->name))
+ if (!request_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0), skystar2_pci_driver.name))
return -EBUSY;
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &adapter->card_revision);
@@ -2093,15 +2057,17 @@
return 1;
}
-int SLL_reset_FlexCOP(struct adapter *adapter)
+/*
+static int SLL_reset_FlexCOP(struct adapter *adapter)
{
WriteRegDW(adapter, 0x208, 0);
WriteRegDW(adapter, 0x210, 0xB2FF);
return 0;
}
+*/
-u32 DriverInitialize(struct pci_dev * pdev)
+static int DriverInitialize(struct pci_dev * pdev)
{
struct adapter *adapter;
u32 tmp;
@@ -2115,7 +2081,7 @@
memset(adapter, 0, sizeof(struct adapter));
- pdev->driver_data = adapter;
+ pci_set_drvdata(pdev,adapter);
adapter->pdev = pdev;
adapter->irq = pdev->irq;
@@ -2123,7 +2089,7 @@
if ((ClaimAdapter(adapter)) != 1) {
FreeAdapterObject(adapter);
- return 2;
+ return -ENODEV;
}
IrqDmaEnableDisableIrq(adapter, 0);
@@ -2133,7 +2099,7 @@
FreeAdapterObject(adapter);
- return 2;
+ return -ENODEV;
}
ReadRegDW(adapter, 0x208);
@@ -2152,33 +2118,33 @@
PidSetEcmPID(adapter, 0x1FFF);
PidSetEmmPID(adapter, 0x1FFF);
- InitDmaQueue(adapter);
+ Initdmaqueue(adapter);
if ((adapter->dma_status & 0x30000000) == 0) {
FreeAdapterObject(adapter);
- return 2;
+ return -ENODEV;
}
- adapter->B2C2_revision = (ReadRegDW(adapter, 0x204) >> 0x18);
+ adapter->b2c2_revision = (ReadRegDW(adapter, 0x204) >> 0x18);
- if ((adapter->B2C2_revision != 0x82) && (adapter->B2C2_revision != 0xC3))
- if (adapter->B2C2_revision != 0x82) {
- dprintk("%s: The revision of the FlexCopII chip on your card is - %d\n", __FUNCTION__, adapter->B2C2_revision);
+ if ((adapter->b2c2_revision != 0x82) && (adapter->b2c2_revision != 0xC3))
+ if (adapter->b2c2_revision != 0x82) {
+ dprintk("%s: The revision of the FlexCopII chip on your card is - %d\n", __FUNCTION__, adapter->b2c2_revision);
dprintk("%s: This driver works now only with FlexCopII(rev.130) and FlexCopIIB(rev.195).\n", __FUNCTION__);
FreeAdapterObject(adapter);
- return 2;
+ return -ENODEV;
}
tmp = ReadRegDW(adapter, 0x204);
WriteRegDW(adapter, 0x204, 0);
- linuxdelayms(20);
+ mdelay(20);
WriteRegDW(adapter, 0x204, tmp);
- linuxdelayms(10);
+ mdelay(10);
tmp = ReadRegDW(adapter, 0x308);
WriteRegDW(adapter, 0x308, 0x4000 | tmp);
@@ -2209,15 +2175,14 @@
EEPROM_readKey(adapter, key, 16);
- printk("%s key = \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n", __FUNCTION__, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7], key[8], key[9], key[10], key[11], key[12], key[13], key[14], key[15]
- );
+ printk("%s key = \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n %02x %02x %02x %02x \n", __FUNCTION__, key[0], key[1], key[2], key[3], key[4], key[5], key[6], key[7], key[8], key[9], key[10], key[11], key[12], key[13], key[14], key[15]);
adapter->lock = SPIN_LOCK_UNLOCKED;
- return 1;
+ return 0;
}
-void DriverHalt(struct pci_dev *pdev)
+static void DriverHalt(struct pci_dev *pdev)
{
struct adapter *adapter;
@@ -2260,11 +2225,8 @@
return 0;
}
-/////////////////////////////////////////////////////////////////////
-// LNB control
-/////////////////////////////////////////////////////////////////////
-
-void set_tuner_tone(struct adapter *adapter, u8 tone)
+/* lnb control */
+static void set_tuner_tone(struct adapter *adapter, u8 tone)
{
u16 wzHalfPeriodFor45MHz[] = { 0x01FF, 0x0154, 0x00FF, 0x00CC };
u16 ax;
@@ -2298,7 +2260,7 @@
}
}
-void set_tuner_polarity(struct adapter *adapter, u8 polarity)
+static void set_tuner_polarity(struct adapter *adapter, u8 polarity)
{
u32 var;
@@ -2416,10 +2378,10 @@
if (pdev == NULL)
return -ENODEV;
- if (DriverInitialize(pdev) != 1)
+ if (DriverInitialize(pdev) != 0)
return -ENODEV;
- dvb_register_adapter(&dvb_adapter, pdev->name);
+ dvb_register_adapter(&dvb_adapter, skystar2_pci_driver.name);
if (dvb_adapter == NULL) {
printk("%s: Error registering DVB adapter\n", __FUNCTION__);
@@ -2429,7 +2391,7 @@
return -ENODEV;
}
- adapter = (struct adapter *) pdev->driver_data;
+ adapter = (struct adapter *) pci_get_drvdata(pdev);
adapter->dvb_adapter = dvb_adapter;
@@ -2528,15 +2489,11 @@
static int skystar2_init(void)
{
- printk("\nTechnisat SkyStar2 driver loading\n");
-
return pci_module_init(&skystar2_pci_driver);
}
static void skystar2_cleanup(void)
{
- printk("\nTechnisat SkyStar2 driver unloading\n");
-
pci_unregister_driver(&skystar2_pci_driver);
}
@@ -2545,4 +2502,3 @@
MODULE_DESCRIPTION("Technisat SkyStar2 DVB PCI Driver");
MODULE_LICENSE("GPL");
-EXPORT_NO_SYMBOLS;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-07-16 11:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-16 11:34 [PATCH 1/1] Update Technisat Skystar2 DVB driver Michael Hunold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).