* [2.6.0-test-ac3] ACPI + sensors => health chip flatlines
@ 2003-07-29 19:58 Mika Liljeberg
2003-07-30 20:07 ` Pavel Machek
0 siblings, 1 reply; 3+ messages in thread
From: Mika Liljeberg @ 2003-07-29 19:58 UTC (permalink / raw)
To: andrew.grover; +Cc: linux-kernel
Hi,
This has happened twice now. I have the following in my kernel log:
acpi_power-0377 [25] acpi_power_transition : Error transitioning device [FAN] to D0
acpi_bus-0256 [24] acpi_bus_set_power : Error transitioning device [FAN] to D0
acpi_thermal-0611 [23] acpi_thermal_active : Unable to turn cooling device [c1be7d34] 'on'
Everything under /sys/devices/legacy/i2c-1/1-0290 is frozen to the same
values, none of the sensors are being updated.
Not quite sure what is going on but it looks like an ACPI thermal trip
routine might be messing up the W83627HF sensor driver.
MikaL
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [2.6.0-test-ac3] ACPI + sensors => health chip flatlines
2003-07-29 19:58 [2.6.0-test-ac3] ACPI + sensors => health chip flatlines Mika Liljeberg
@ 2003-07-30 20:07 ` Pavel Machek
0 siblings, 0 replies; 3+ messages in thread
From: Pavel Machek @ 2003-07-30 20:07 UTC (permalink / raw)
To: Mika Liljeberg; +Cc: andrew.grover, linux-kernel
Hi!
> acpi_power-0377 [25] acpi_power_transition : Error transitioning device [FAN] to D0
> acpi_bus-0256 [24] acpi_bus_set_power : Error transitioning device [FAN] to D0
> acpi_thermal-0611 [23] acpi_thermal_active : Unable to turn cooling device [c1be7d34] 'on'
>
> Everything under /sys/devices/legacy/i2c-1/1-0290 is frozen to the same
> values, none of the sensors are being updated.
>
> Not quite sure what is going on but it looks like an ACPI thermal trip
> routine might be messing up the W83627HF sensor driver.
It probably is :-(. Either use acpi or w8xxxxHF, but not both.
--
Pavel
Written on sharp zaurus, because my Velo1 broke. If you have Velo you don't need...
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [2.6.0-test-ac3] ACPI + sensors => health chip flatlines
@ 2003-07-29 22:18 Grover, Andrew
0 siblings, 0 replies; 3+ messages in thread
From: Grover, Andrew @ 2003-07-29 22:18 UTC (permalink / raw)
To: Mika Liljeberg; +Cc: linux-kernel
> From: Mika Liljeberg [mailto:mika.liljeberg@welho.com]
> This has happened twice now. I have the following in my kernel log:
>
> acpi_power-0377 [25] acpi_power_transition : Error
> transitioning device [FAN] to D0
> acpi_bus-0256 [24] acpi_bus_set_power : Error
> transitioning device [FAN] to D0
> acpi_thermal-0611 [23] acpi_thermal_active : Unable to turn
> cooling device [c1be7d34] 'on'
>
> Everything under /sys/devices/legacy/i2c-1/1-0290 is frozen
> to the same
> values, none of the sensors are being updated.
>
> Not quite sure what is going on but it looks like an ACPI thermal trip
> routine might be messing up the W83627HF sensor driver.
Greg KH and I have talked about this a little and I think it's going to
be 2.7 before this gets resolved.
-- Andy
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-07-30 20:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-29 19:58 [2.6.0-test-ac3] ACPI + sensors => health chip flatlines Mika Liljeberg
2003-07-30 20:07 ` Pavel Machek
2003-07-29 22:18 Grover, Andrew
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).