2.6.0-test2: irq 18: nobody cared...Disabling irq #18 (i875P SATA)

2.6.0-test2: irq 18: nobody cared...Disabling irq #18 (i875P SATA)

[Jurgen Kramer]

Hi,

While booting 2.6.0-test2 on my i875P based PC I get the following:

<snip>
Adding 787176k swap on /dev/hda3.  Priority:-1 extents:1
irq 18: nobody cared!
Call Trace:
 [<c010cf76>] __report_bad_irq+0x2a/0x8b
 [<c010d060>] note_interrupt+0x6f/0x9f
 [<c010d38d>] do_IRQ+0x175/0x1a6
 [<c010884e>] default_idle+0x0/0x2d
 [<c010884e>] default_idle+0x0/0x2d
 [<c010b5c4>] common_interrupt+0x18/0x20
 [<c010884e>] default_idle+0x0/0x2d
 [<c010884e>] default_idle+0x0/0x2d
 [<c0108878>] default_idle+0x2a/0x2d
 [<c01088ee>] cpu_idle+0x39/0x42
 [<c0105000>] rest_init+0x0/0x65
 [<c035a83e>] start_kernel+0x191/0x1ca
 [<c035a403>] unknown_bootoption+0x0/0xff

handlers:
[<c01ef51c>] (ide_intr+0x0/0x1d4)
Disabling IRQ #18


IRQ 18 belongs to the SATA interface:

ide2 at 0xefe0-0xefe7,0xefae on irq 18

Funny thing is that the SATA drive is still usable while the irq
is disabled.

I also noticed that the interrupt count for IRQ 18 is still rather high
(as I mention in a previous mail):

           CPU0       CPU1
  0:     552358          0    IO-APIC-edge  timer
  2:          0          0          XT-PIC  cascade
  9:          0          0   IO-APIC-level  acpi
 14:      11122          0    IO-APIC-edge  ide0
 15:          1          0    IO-APIC-edge  ide1
 16:      42146          0   IO-APIC-level  uhci-hcd, nvidia
 17:          0          0   IO-APIC-level  Intel ICH5
 18:     100013      99992   IO-APIC-level  ide2
 19:      14627          0   IO-APIC-level  uhci-hcd
 20:          2          0   IO-APIC-level  ohci1394
 21:        530          0   IO-APIC-level  eth0
 23:          0          0   IO-APIC-level  ehci_hcd
NMI:          0          0
LOC:     552289     552628
ERR:          0
MIS:          4

Any solutions?

Cheers,

Jurgen