* [PATCH] ppc32: Fix PowerMac mediabay driver
@ 2003-08-03 14:07 Benjamin Herrenschmidt
0 siblings, 0 replies; only message in thread
From: Benjamin Herrenschmidt @ 2003-08-03 14:07 UTC (permalink / raw)
To: Marcelo Tosatti, Alan Cox; +Cc: linux-kernel mailing list
Hi Marcelo !
The mediabay driver for PowerMac (hotswap IDE bay) got broken in 2.4.21
by the switch of ide pmac to mmio, this fixes it along with a longstanding
bug where the timeout waiting for the drive to be ready
was actually infinite.
Please apply. Note that proper operations for this driver requires
the other patch I just sent that fixes proper keeping of the "hold"
flag in hwif during ide_unregister() call.
Ben.
diff -urN linux-2.4/drivers/macintosh/mediabay.c linuxppc_benh_devel/drivers/macintosh/mediabay.c
--- linux-2.4/drivers/macintosh/mediabay.c 2003-07-08 10:50:26.000000000 +0200
+++ linuxppc_benh_devel/drivers/macintosh/mediabay.c 2003-08-03 15:12:31.000000000 +0200
@@ -109,7 +109,7 @@
#ifdef CONFIG_BLK_DEV_IDE
/* check the busy bit in the media-bay ide interface
(assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i) ((inb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
+#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
#endif
/* Note: All delays are not in milliseconds and converted to HZ relative
@@ -577,7 +577,8 @@
MBDBG("mediabay %d IDE ready\n", i);
}
break;
- }
+ } else if (bay->timer > 0)
+ bay->timer--;
if (bay->timer == 0) {
printk("\nIDE Timeout in bay %d !\n", i);
MBDBG("mediabay%d: nIDE Timeout !\n", i);
@@ -756,7 +757,7 @@
struct media_bay_info* bay = &media_bays[n];
if (!np->parent || np->n_addrs == 0 || !request_OF_resource(np, 0, NULL)) {
np = np->next;
- printk(KERN_ERR "media-bay: Can't request IO resource !\n");
+ printk(KERN_ERR "mediabay: Can't request IO resource !\n");
continue;
}
bay->mb_type = mb_ohare;
@@ -771,7 +772,7 @@
bay->mb_type = mb_ohare;
bay->ops = &ohare_mb_ops;
} else {
- printk(KERN_ERR "mediabay: Unknown bay type !\n");
+ printk(KERN_ERR "media-bay: Unknown bay type !\n");
np = np->next;
continue;
}
@@ -782,7 +783,7 @@
MB_BIS(bay, KEYLARGO_MBCR, KL_MBCR_MB0_ENABLE);
#ifdef MB_USE_INTERRUPTS
if (np->n_intrs == 0) {
- printk(KERN_ERR "media bay %d has no irq\n",n);
+ printk(KERN_ERR "media-bay %d has no irq\n",n);
np = np->next;
continue;
}
@@ -823,8 +824,9 @@
pmu_register_sleep_notifier(&mb_sleep_notifier);
#endif /* CONFIG_PMAC_PBOOK */
- kernel_thread(media_bay_task, NULL,
- CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
+ if (kernel_thread(media_bay_task, NULL,
+ CLONE_FS | CLONE_FILES | CLONE_SIGHAND) < 0)
+ printk(KERN_ERR "media-bay: Cannot create polling thread !\n");
}
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-08-03 14:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-03 14:07 [PATCH] ppc32: Fix PowerMac mediabay driver Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).