* [PATCH 2.6.0-test3]bugfix for initialization bug in adm1021 driver
@ 2003-08-12 23:38 Rusty Lynch
2003-08-14 21:32 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Rusty Lynch @ 2003-08-12 23:38 UTC (permalink / raw)
To: LM Sensors; +Cc: lkml
While initializing the adm1021 device, the driver is performing a conversion
from fixed point to Celcius on values that were declaired as Celcius. On
my Dell Precision 220 this results in a shutdown after a couple of minutes
running.
This is a very simple patch against the 2.6.0-test3 tree that just removes the
conversion.
--rustyl
diff -urN linux-2.6.0-test3/drivers/i2c/chips/adm1021.c linux-2.6.0-test3-patched/drivers/i2c/chips/adm1021.c
--- linux-2.6.0-test3/drivers/i2c/chips/adm1021.c 2003-08-08 21:31:16.000000000 -0700
+++ linux-2.6.0-test3-patched/drivers/i2c/chips/adm1021.c 2003-08-12 16:54:25.000000000 -0700
@@ -356,13 +356,13 @@
{
/* Initialize the adm1021 chip */
adm1021_write_value(client, ADM1021_REG_TOS_W,
- TEMP_TO_REG(adm1021_INIT_TOS));
+ adm1021_INIT_TOS);
adm1021_write_value(client, ADM1021_REG_THYST_W,
- TEMP_TO_REG(adm1021_INIT_THYST));
+ adm1021_INIT_THYST);
adm1021_write_value(client, ADM1021_REG_REMOTE_TOS_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_TOS));
+ adm1021_INIT_REMOTE_TOS);
adm1021_write_value(client, ADM1021_REG_REMOTE_THYST_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_THYST));
+ adm1021_INIT_REMOTE_THYST);
/* Enable ADC and disable suspend mode */
adm1021_write_value(client, ADM1021_REG_CONFIG_W, 0);
/* Set Conversion rate to 1/sec (this can be tinkered with) */
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 2.6.0-test3]bugfix for initialization bug in adm1021 driver
2003-08-12 23:38 [PATCH 2.6.0-test3]bugfix for initialization bug in adm1021 driver Rusty Lynch
@ 2003-08-14 21:32 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2003-08-14 21:32 UTC (permalink / raw)
To: Rusty Lynch; +Cc: LM Sensors, lkml
On Tue, Aug 12, 2003 at 04:38:13PM -0700, Rusty Lynch wrote:
> While initializing the adm1021 device, the driver is performing a conversion
> from fixed point to Celcius on values that were declaired as Celcius. On
> my Dell Precision 220 this results in a shutdown after a couple of minutes
> running.
>
> This is a very simple patch against the 2.6.0-test3 tree that just removes the
> conversion.
Applied, thanks.
Next time you might want to CC: me to make sure I catch this.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-08-14 21:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-12 23:38 [PATCH 2.6.0-test3]bugfix for initialization bug in adm1021 driver Rusty Lynch
2003-08-14 21:32 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).