* Re: 2.6.0-test5-mm1
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
@ 2003-09-09 7:02 ` Joshua Kwan
2003-09-09 21:57 ` 2.6.0-test5-mm1 Cliff White
2003-09-09 7:53 ` 2.6.0-test5-mm1 Jeremy Fitzhardinge
` (4 subsequent siblings)
5 siblings, 1 reply; 11+ messages in thread
From: Joshua Kwan @ 2003-09-09 7:02 UTC (permalink / raw)
To: linux-kernel, linux-mm, akpm
[-- Attachment #1: Type: text/plain, Size: 732 bytes --]
On Mon, Sep 08, 2003 at 11:50:28PM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm1/
Needs the following patch to compile:
--- mm/slab.c~ 2003-09-08 23:58:31.000000000 -0700
+++ mm/slab.c 2003-09-08 23:58:33.000000000 -0700
@@ -2794,11 +2794,13 @@
} else {
kernel_map_pages(virt_to_page(objp), c->objsize/PAGE_SIZE, 1);
+#if DEBUG
if (c->flags & SLAB_RED_ZONE)
printk("redzone: 0x%lx/0x%lx.\n", *dbg_redzone1(c, objp), *dbg_redzone2(c, objp));
if (c->flags & SLAB_STORE_USER)
printk("Last user: %p.\n", *dbg_userword(c, objp));
+#endif
}
spin_unlock_irqrestore(&c->spinlock, flags);
--
Joshua Kwan
[-- Attachment #2: Type: application/pgp-signature, Size: 827 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-09 7:02 ` 2.6.0-test5-mm1 Joshua Kwan
@ 2003-09-09 21:57 ` Cliff White
0 siblings, 0 replies; 11+ messages in thread
From: Cliff White @ 2003-09-09 21:57 UTC (permalink / raw)
To: joshk, linux-kernel, linux-mm, akpm
OSDL's STP saw this problem, no tests ran on 2.6.0-test5-mm1
We've added this patch (PLM #2112) and are running tests now.
cliffw
> On Mon, Sep 08, 2003 at 11:50:28PM -0700, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm1/
>
> Needs the following patch to compile:
>
> --- mm/slab.c~ 2003-09-08 23:58:31.000000000 -0700
> +++ mm/slab.c 2003-09-08 23:58:33.000000000 -0700
> @@ -2794,11 +2794,13 @@
> } else {
> kernel_map_pages(virt_to_page(objp), c->objsize/PAGE_SIZE, 1);
>
> +#if DEBUG
> if (c->flags & SLAB_RED_ZONE)
> printk("redzone: 0x%lx/0x%lx.\n", *dbg_redzone1(c, objp), *dbg_redzone2(c, objp));
>
> if (c->flags & SLAB_STORE_USER)
> printk("Last user: %p.\n", *dbg_userword(c, objp));
> +#endif
> }
> spin_unlock_irqrestore(&c->spinlock, flags);
>
> --
> Joshua Kwan
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: 2.6.0-test5-mm1
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
2003-09-09 7:02 ` 2.6.0-test5-mm1 Joshua Kwan
@ 2003-09-09 7:53 ` Jeremy Fitzhardinge
2003-09-10 19:59 ` 2.6.0-test5-mm1 usb keyboard prob Jonathan Brown
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Jeremy Fitzhardinge @ 2003-09-09 7:53 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Kernel List, linux-mm
On Mon, 2003-09-08 at 23:50, Andrew Morton wrote:
> +group_leader-rework.patch
>
> Use the thread group leader's pgrp rather than the current thread's pgrp
> everywhere.
Missed one:
fs/autofs/inode.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -puN fs/autofs/inode.c~fix-pgrp fs/autofs/inode.c
--- local-2.6/fs/autofs/inode.c~fix-pgrp 2003-09-09 00:29:35.000000000 -0700
+++ local-2.6-jeremy/fs/autofs/inode.c 2003-09-09 00:30:05.000000000 -0700
@@ -129,7 +129,7 @@ int autofs_fill_super(struct super_block
sbi->magic = AUTOFS_SBI_MAGIC;
sbi->catatonic = 0;
sbi->exp_timeout = 0;
- sbi->oz_pgrp = current->pgrp;
+ sbi->oz_pgrp = process_group(current);
autofs_initialize_hash(&sbi->dirhash);
sbi->queues = NULL;
memset(sbi->symlink_bitmap, 0, sizeof(long)*AUTOFS_SYMLINK_BITMAP_LEN);
_
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1 usb keyboard prob
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
2003-09-09 7:02 ` 2.6.0-test5-mm1 Joshua Kwan
2003-09-09 7:53 ` 2.6.0-test5-mm1 Jeremy Fitzhardinge
@ 2003-09-10 19:59 ` Jonathan Brown
2003-09-10 21:17 ` 2.6.0-test5-mm1 Wiktor Wodecki
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Jonathan Brown @ 2003-09-10 19:59 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-mm
[-- Attachment #1: Type: text/plain, Size: 27339 bytes --]
My Apple usb keyboard / hub and attached logitech keyboard does not work
with this kernel. An identical setup on test5 and test4-mm3 works fine.
Whenever the hotplug script from linux-hotplug.sourceforge.net runs at
startup I get the message "Disabled interrupt #5" and the light on my
mouse goes out and the keyboard is dead.
UHCI Host Controller
Manufacturer: Linux 2.6.0-test5 uhci-hcd
Serial Number: 0000:00:07.2
Speed: 12Mb/s (full)
Number of Ports: 2
Bandwidth allocated: 140 / 900 (16%)
Total number of interrupt requests: 4
Total number of isochronous requests: 0
USB Version: 1.10
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Config Number: 1
Number of Interfaces: 1
Attributes: 40
MaxPower Needed: 0mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 2
Interval: 255ms
Hub in Apple Extended USB Keyboard
Manufacturer: Mitsumi Electric
Speed: 12Mb/s (full)
Number of Ports: 3
USB Version: 1.10
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 05ac
Product Id: 1002
Revision Number: 1.22
Config Number: 1
Number of Interfaces: 1
Attributes: a0
MaxPower Needed: 50mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 1
Interval: 255ms
Apple Extended USB Keyboard
Manufacturer: Mitsumi Electric
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 05ac
Product Id: 0205
Revision Number: 1.22
Config Number: 1
Number of Interfaces: 2
Attributes: a0
MaxPower Needed: 50mA
Interface Number: 0
Name: hid
Alternate Number: 0
Class: 03(HID )
Sub Class: 1
Protocol: 1
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms
Interface Number: 1
Name: hid
Alternate Number: 0
Class: 03(HID )
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 82
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 4
Interval: 255ms
USB-PS/2 Optical Mouse
Manufacturer: B16_b_02
Speed: 1.5Mb/s (low)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 046d
Product Id: c024
Revision Number: 98.02
Config Number: 1
Number of Interfaces: 1
Attributes: a0
MaxPower Needed: 98mA
Interface Number: 0
Name: hid
Alternate Number: 0
Class: 03(HID )
Sub Class: 1
Protocol: 2
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 5
Interval: 10ms
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI_HT is not set
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_FERAL_ISP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=y
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=y
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_MGA=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_AX8817X_STANDALONE is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_BIOS_REBOOT=y
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
` (2 preceding siblings ...)
2003-09-10 19:59 ` 2.6.0-test5-mm1 usb keyboard prob Jonathan Brown
@ 2003-09-10 21:17 ` Wiktor Wodecki
2003-09-11 6:53 ` 2.6.0-test5-mm1 William Lee Irwin III
2003-09-13 9:13 ` 2.6.0-test5-mm1 Alex Riesen
5 siblings, 0 replies; 11+ messages in thread
From: Wiktor Wodecki @ 2003-09-10 21:17 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-mm
[-- Attachment #1.1: Type: text/plain, Size: 17011 bytes --]
Hi,
still errors with uncared irq with test5-mm1:
Sep 10 21:36:13 kakerlak kernel: irq 7: nobody cared!
Sep 10 21:36:13 kakerlak kernel: Call Trace:
Sep 10 21:36:13 kakerlak kernel: [__report_bad_irq+42/144] __report_bad_irq+0x2a/0x90
Sep 10 21:36:13 kakerlak kernel: [note_interrupt+108/176] note_interrupt+0x6c/0xb0
Sep 10 21:36:13 kakerlak kernel: [do_IRQ+288/304] do_IRQ+0x120/0x130
Sep 10 21:36:13 kakerlak kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Sep 10 21:36:13 kakerlak kernel: [do_softirq+64/160] do_softirq+0x40/0xa0
Sep 10 21:36:13 kakerlak kernel: [do_IRQ+252/304] do_IRQ+0xfc/0x130
Sep 10 21:36:13 kakerlak kernel: [_stext+0/96] rest_init+0x0/0x60
Sep 10 21:36:13 kakerlak kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
Sep 10 21:36:13 kakerlak kernel: [_stext+0/96] rest_init+0x0/0x60
Sep 10 21:36:13 kakerlak kernel: [acpi_processor_idle+213/455] acpi_processor_idle+0xd5/0x1c7
Sep 10 21:36:13 kakerlak kernel: [_stext+0/96] rest_init+0x0/0x60
Sep 10 21:36:13 kakerlak kernel: [cpu_idle+44/64] cpu_idle+0x2c/0x40
Sep 10 21:36:13 kakerlak kernel: [start_kernel+332/352] start_kernel+0x14c/0x160
Sep 10 21:36:13 kakerlak kernel: [unknown_bootoption+0/256] unknown_bootoption+0x0/0x100
Sep 10 21:36:13 kakerlak kernel:
Sep 10 21:36:13 kakerlak kernel: handlers:
Sep 10 21:36:13 kakerlak kernel: [acpi_irq+0/22] (acpi_irq+0x0/0x16)
Sep 10 21:36:13 kakerlak kernel: Disabling IRQ #7
kernel booted with pci=noacpi, lspci attached
On Mon, Sep 08, 2003 at 11:50:28PM -0700, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm1/
>
>
> Small fixes, mainly.
>
>
>
>
> Changes since 2.6.0-test4-mm6:
>
>
> -sysfs-memleak-fix.patch
> -large-dev_t-2nd-01.patch
> -large-dev_t-2nd-02.patch
> -large-dev_t-2nd-03.patch
> -large-dev_t-2nd-04.patch
> -large-dev_t-2nd-05.patch
> -large-dev_t-2nd-06.patch
> -large-dev_t-2nd-07.patch
> -large-dev_t-2nd-08.patch
> -large-dev_t-2nd-09.patch
> -large-dev_t-2nd-10.patch
> -large-dev_t-2nd-11.patch
> -large-dev_t-2nd-12.patch
> -large-dev_t-2nd-13.patch
> -large-dev_t-2nd-14.patch
> -large-dev_t-2nd-15.patch
> -kobject-unlimited-name-lengths.patch
> -kobject-unlimited-name-lengths-use-after-free-fix.patch
> -remove-version_h.patch
> -remove-__SMP__.patch
> -make-init_mister-static.patch
> -skfddi-copy_user-checks.patch
> -ll_rw_blk-comment-corrections.patch
> -sc520_wdt-ioremap-checking.patch
> -paride-error-return-handling.patch
> -init-exit-cleanups.patch
> -qla1280-pci-alloc-free-checking.patch
> -saa7134-core-ioremap-checking.patch
> -acpi-pci-routing-fixes.patch
>
> Merged
>
> +tg3-poll_controller.patch
> +kgdb-eth-reattach.patch
> +kgdb-skb_reserve-fix.patch
>
> kgdb-over-ethernet fixes
>
> -fix-io-hangs.patch
> -as-insert-here-fix.patch
>
> Obsoleted
>
> +acpi-irq-fixes.patch
>
> Andrew de Quincey's ACPI changes
>
> -cfq-3.patch
> -cfq-3-fixes.patch
> +cfq-4.patch
>
> Reworked CFQ IO scheduler
>
> -thread-pgrp-fix-2.patch
>
> Obsoleted by group_leader-rework.patch
>
> +group_leader-rework.patch
>
> Use the thread group leader's pgrp rather than the current thread's pgrp
> everywhere.
>
> +timer_tsc-cyc2ns_scale-fix.patch
>
> ia32 timer fixlet
>
> +ppp-oops-fix.patch
>
> Fix an oops in the PPP driver (with devfs)
>
> +d_delete-d_lookup-race-fix.patch
>
> dentry race fix
>
> +idle-using-monitor-mwait.patch
> +idle-using-monitor-mwait-tweaks.patch
>
> Support for using the new ia32 monitor/mwait instructions in the idle loop.
>
> +remap_file_pages-MAP_NONBLOCK-fix.patch
> +install_page-use-after-unmap-fix.patch
>
> remap_file_pages() fixes
>
> +agp-build-fix.patch
>
> Compile fix
>
> +inflate-error-cleanup.patch
>
> Error message consistencies.
>
> +slab-debug-additions.patch
>
> Slab debug enhancements, including: make sure that objects are aligned at
> the highest possible address within their page, so overruns are more likely
> to trigger the page unmapping debug feature.
>
> +mwave-locking-fixes.patch
>
> mwave driver fixes
>
> +summit-includes-fix.patch
>
> Build fix
>
> +random-lock-contention.patch
>
> Fix lock contention in the new random driver locking on monster SMP.
>
> +agp-warning-fix.patch
>
> Fix some warning
>
> +ifdown-lockup-fix.patch
>
> Fix network device close hang
>
> +fadvise-needs-asmlinkage.patch
>
> Missing asmlinkage
>
> +ufs-build-fix.patch
>
> Purge C++isms
>
> -put_task_struct-debug.patch
>
> This broke, but the bug was fixed anyway.
>
> -sparc64-lockmeter-fix.patch
> -sparc64-lockmeter-fix-2.patch
>
> Folded into lockmeter.patch
>
> +4g4g-copy_mount_options-fix.patch
> +4g4g-pagetable-accounting-fix.patch
>
> 4G/4G fixes
>
>
>
>
>
> All 173 patches:
>
>
> mm.patch
> add -mmN to EXTRAVERSION
>
> kgdb-ga.patch
> kgdb stub for ia32 (George Anzinger's one)
> kgdbL warning fix
>
> kgdb-warning-fix.patch
> kgdbL warning fix
>
> kgdb-build-fix.patch
>
> kgdb-spinlock-fix.patch
>
> kgdb-fix-debug-info.patch
> kgdb: CONFIG_DEBUG_INFO fix
>
> kgdb-cpumask_t.patch
>
> kgdb-x86_64-fixes.patch
> x86_64 fixes
>
> kgdb-over-ethernet.patch
> kgdb-over-ethernet patch
>
> kgdb-over-ethernet-fixes.patch
> kgdb-over-ethernet fixlets
>
> kgdb-CONFIG_NET_POLL_CONTROLLER.patch
> kgdb: replace CONFIG_KGDB with CONFIG_NET_RX_POLL in net drivers
>
> kgdb-handle-stopped-NICs.patch
> kgdb: handle netif_stopped NICs
>
> eepro100-poll-controller.patch
>
> tlan-poll_controller.patch
>
> tulip-poll_controller.patch
>
> tg3-poll_controller.patch
> kgdb: tg3 poll_controller
>
> kgdb-eth-smp-fix.patch
> kgdb-over-ethernet: fix SMP
>
> kgdb-eth-reattach.patch
>
> kgdb-skb_reserve-fix.patch
> kgdb-over-ethernet: skb_reserve() fix
>
> acpi-irq-fixes.patch
> Next round of ACPI IRQ fixes (VIA ACPI fixed)
>
> cfq-4.patch
> CFQ io scheduler
> CFQ fixes
>
> no-unit-at-a-time.patch
> Use -fno-unit-at-a-time if gcc supports it
>
> calibrate_tsc-consolidation.patch
> calibrate_tsc() fix and consolidation
>
> config_spinline.patch
> uninline spinlocks for profiling accuracy.
>
> ppc64-build-fixes.patch
> Fix ppc64 breakage
>
> ppc64-bar-0-fix.patch
> Allow PCI BARs that start at 0
>
> ppc64-reloc_hide.patch
>
> ppc64-semaphore-reimplementation.patch
> ppc64: use the ia32 semaphore implementation
>
> ppc64-local.patch
> ppc64: local.h implementation
>
> sym-do-160.patch
> make the SYM driver do 160 MB/sec
>
> rt-tasks-special-vm-treatment.patch
> real-time enhanced page allocator and throttling
>
> rt-tasks-special-vm-treatment-2.patch
>
> input-use-after-free-checks.patch
> input layer debug checks
>
> fbdev.patch
> framebbuffer driver update
>
> cursor-flashing-fix.patch
> fbdev: fix cursor letovers
>
> slab-hexdump.patch
> slab: hexdump structures when things go wrong
>
> aic7xxx-parallel-build-fix.patch
> fix parallel builds for aic7xxx
>
> group_leader-rework.patch
> Fix setpgid and threads
> use group_leader->pgrp (was Re: setpgid and threads)
>
> ramdisk-cleanup.patch
>
> delay-ksoftirqd-fallback.patch
> Try harded in IRQ context before falling back to ksoftirqd
>
> intel8x0-cleanup.patch
> intel8x0 cleanups
>
> claim-serio-early.patch
> Serio: claim serio early
>
> mark-devfs-obsolete.patch
> mark devfs obsolete
>
> VT8231-router-detection.patch
> VT8231 IRQ router detection
>
> block-devfs-conversions.patch
> Initialise devfs_name in various block drivers
>
> timer_tsc-cyc2ns_scale-fix.patch
> monolitic_clock, timer_{tsc,hpet} and CPUFREQ
>
> test4-pm1.patch
> power management update
>
> ide-pm-oops-fix.patch
> IDE power management oops fix
>
> swsusp-fpu-fix.patch
> swsusp fpu management fix
>
> ricoh-mask-fix.patch
> pcmcia: ricoh.h mask fix
> EDEC
> From: KOMURO <komujun@nifty.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>
>
> RL5C4XX_16BIT_MEM_0 was wrong.
>
> dac960-devfs_name-fix.patch
> dac960 devfs_name initialisation fix
>
> dac960-warning-fixes.patch
> compiler warning fixes for DAC960 on alpha
>
> ikconfig-gzipped-2.patch
> Move ikconfig to /proc/config.gz
> ikconfig cleanup
>
> flush-invalidate-fixes.patch
> memory writeback/invalidation fixes
>
> flush-invalidate-fixes-warning-fix.patch
>
> ide_floppy-maybe-fix.patch
> might fix ide_floppy
>
> reiserfs-direct-io.patch
> resierfs direct-IO support
>
> pdflush-diag.patch
>
> joydev-exclusions.patch
> joydev is too eager claiming input devices
>
> might_sleep-diags.patch
>
> imm-fix-fix.patch
> Fix imm.c again
>
> selinux-option-config-option.patch
> make selinux enable param config option, enabled by default
>
> sound-remove-duplicate-includes.patch
> sound: remove duplicate includes
>
> kernel-remove-duplicate-includes.patch
> remove duplicate includes in kernel/
>
> utime-on-immutable-file-fix.patch
> disallow utime{s}() on immutable or append-only files
>
> add-daniele-to-credits.patch
> add Daniele to CREDITS
>
> NR_CPUS-overflow-fix.patch
> Handle NR_CPUS overflow
>
> ppp-oops-fix.patch
> ppp oops fix
>
> d_delete-d_lookup-race-fix.patch
> d_delete-d_lookup race fix
>
> idle-using-monitor-mwait.patch
> idle using PNI monitor/mwait
>
> idle-using-monitor-mwait-tweaks.patch
>
> remap_file_pages-MAP_NONBLOCK-fix.patch
> remap file pages MAP_NONBLOCK fix
>
> install_page-use-after-unmap-fix.patch
> install_page pte use-after-unmap fix
>
> agp-build-fix.patch
> AGPGART_MINOR needs <linux/agpgart.h>
>
> really-use-english-date-in-version-string.patch
> really use english date in version string
>
> inflate-error-cleanup.patch
> tidy up lib/inflate.c error messages
>
> slab-debug-additions.patch
> Move slab objects to the end of the real allocation
>
> mwave-locking-fixes.patch
> mwave locking fixes
>
> summit-includes-fix.patch
> fix Summit srat.h includes
>
> random-lock-contention.patch
> Redue random driver lock contention
>
> agp-warning-fix.patch
> AGP warning fix
>
> ifdown-lockup-fix.patch
>
> fadvise-needs-asmlinkage.patch
>
> ufs-build-fix.patch
> fs/ufs/namei.c build fix
>
> p00001_synaptics-restore-on-close.patch
>
> p00002_psmouse-reset-timeout.patch
>
> p00003_synaptics-multi-button.patch
>
> p00004_synaptics-optional.patch
>
> p00005_synaptics-pass-through.patch
>
> p00006_psmouse-suspend-resume.patch
>
> p00007_synaptics-old-proto.patch
>
> synaptics-mode-set.patch
> Synaptics mode setting
>
> syn-multi-btn-fix.patch
> synaptics multibutton fix
>
> keyboard-resend-fix.patch
> keyboard resend fix
>
> psmouse_ipms2-option.patch
> Force mouse detection as imps/2 (and fix my KVM switch)
>
> i8042-history.patch
> debug: i8042 history dumping
>
> linux-isp-2.patch
>
> linux-isp-2-fix-again.patch
> lost feral fix
>
> feral-bounce-fix.patch
> Feral driver - highmem issues
>
> feral-bounce-fix-2.patch
> Feral driver bouncing fix
>
> list_del-debug.patch
> list_del debug check
>
> print-build-options-on-oops.patch
> print a few config options on oops
>
> show_task-free-stack-fix.patch
> show_task() fix and cleanup
>
> oops-dump-preceding-code.patch
> i386 oops output: dump preceding code
>
> lockmeter.patch
>
> printk-oops-mangle-fix.patch
> disentangle printk's whilst oopsing on SMP
>
> 20-odirect_enable.patch
>
> 21-odirect_cruft.patch
>
> 22-read_proc.patch
>
> 23-write_proc.patch
>
> 24-commit_proc.patch
>
> 25-odirect.patch
>
> nfs-O_DIRECT-always-enabled.patch
> Force CONFIG_NFS_DIRECTIO
>
> sched-CAN_MIGRATE_TASK-fix.patch
> CAN_MIGRATE fix
>
> sched-balance-fix-2.6.0-test3-mm3-A0.patch
> sched-balance-fix-2.6.0-test3-mm3-A0
>
> sched-2.6.0-test2-mm2-A3.patch
> sched-2.6.0-test2-mm2-A3
>
> ppc-sched_clock.patch
>
> ppc64-sched_clock.patch
> ppc64: sched_clock()
>
> sparc64_sched_clock.patch
>
> x86_64-sched_clock.patch
> Add sched_clock for x86-64
>
> sched-warning-fix.patch
>
> sched-balance-tuning.patch
> CPU scheduler balancing fix
>
> sched-no-tsc-on-numa.patch
> Subject: Re: Fw: Re: 2.6.0-test2-mm3
>
> o12.2int.patch
> O12.2int for interactivity
>
> o12.3.patch
> O12.3 for interactivity
>
> o13int.patch
> O13int for interactivity
>
> o13.1int.patch
> O13.1int
>
> o14int.patch
> O14int
>
> o14int-div-fix.patch
> o14int 64-bit-divide fix
>
> o14.1int.patch
> O14.1int
>
> o15int.patch
> O15int for interactivity
>
> o16int.patch
> From: Con Kolivas <kernel@kolivas.org>
> Subject: [PATCH] O16int for interactivity
>
> o16.1int.patch
> O16.1int for interactivity
>
> o16.2int.patch
> O16.2int
>
> o16.3int.patch
> O16.3int
>
> o18int.patch
> O18int
>
> o18.1int.patch
> O18.1int
>
> sched-cpu-migration-fix.patch
> sched: task migration fix
>
> o19int.patch
> O19int
>
> o20int.patch
> O20int
>
> 4g-2.6.0-test2-mm2-A5.patch
> 4G/4G split patch
> 4G/4G: remove debug code
> 4g4g: pmd fix
> 4g/4g: fixes from Bill
> 4g4g: fpu emulation fix
> 4g/4g usercopy atomicity fix
> 4G/4G: remove debug code
> 4g4g: pmd fix
> 4g/4g: fixes from Bill
> 4g4g: fpu emulation fix
> 4g/4g usercopy atomicity fix
> 4G/4G preempt on vstack
> 4G/4G: even number of kmap types
> 4g4g: fix __get_user in slab
> 4g4g: Remove extra .data.idt section definition
> 4g/4g linker error (overlapping sections)
> 4G/4G: remove debug code
> 4g4g: pmd fix
> 4g/4g: fixes from Bill
> 4g4g: fpu emulation fix
> 4g4g: show_registers() fix
> 4g/4g usercopy atomicity fix
> 4g4g: debug flags fix
> 4g4g: Fix wrong asm-offsets entry
> cyclone time fixmap fix
> 4G/4G preempt on vstack
> 4G/4G: even number of kmap types
> 4g4g: fix __get_user in slab
> 4g4g: Remove extra .data.idt section definition
> 4g/4g linker error (overlapping sections)
> 4G/4G: remove debug code
> 4g4g: pmd fix
> 4g/4g: fixes from Bill
> 4g4g: fpu emulation fix
> 4g4g: show_registers() fix
> 4g/4g usercopy atomicity fix
> 4g4g: debug flags fix
> 4g4g: Fix wrong asm-offsets entry
> cyclone time fixmap fix
>
> 4g4g-cyclone-timer-fix.patch
>
> 4g4g-copy_mount_options-fix.patch
> use direct_copy_{to,from}_user for kernel access in mm/usercopy.c
>
> 4g4g-pagetable-accounting-fix.patch
> 4g/4g pagetable accounting fix
>
> ppc-fixes.patch
> make mm4 compile on ppc
>
> aic7xxx_old-oops-fix.patch
>
> aio-01-retry.patch
> AIO: Core retry infrastructure
>
> io_submit_one-EINVAL-fix.patch
> Fix aio process hang on EINVAL
>
> aio-02-lockpage_wq.patch
> AIO: Async page wait
>
> aio-03-fs_read.patch
> AIO: Filesystem aio read
>
> aio-04-buffer_wq.patch
> AIO: Async buffer wait
>
> aio-05-fs_write.patch
> AIO: Filesystem aio write
>
> aio-05-fs_write-fix.patch
>
> aio-06-bread_wq.patch
> AIO: Async block read
>
> aio-06-bread_wq-fix.patch
>
> aio-07-ext2getblk_wq.patch
> AIO: Async get block for ext2
>
> O_SYNC-speedup-2.patch
> speed up O_SYNC writes
>
> aio-09-o_sync.patch
> aio O_SYNC
>
> aio-10-BUG-fix.patch
> AIO: fix a BUG
>
> aio-11-workqueue-flush.patch
> AIO: flush workqueues before destroying ioctx'es
>
> aio-12-readahead.patch
> AIO: readahead fixes
>
> aio-dio-no-readahead.patch
> aio O_DIRECT no readahead
>
> lock_buffer_wq-fix.patch
> lock_buffer_wq fix
>
> unuse_mm-locked.patch
> AIO: hold the context lock across unuse_mm
>
> aio-take-task_lock.patch
> task task_lock in use_mm()
>
> aio-O_SYNC-fix.patch
> Unify o_sync changes for aio and regular writes
>
> aio-O_SYNC-fix-missing-bit.patch
> aio-O_SYNC-fix bits got lost
>
> O_SYNC-speedup-nolock-fix.patch
>
> aio-writev-nsegs-fix.patch
> aio: writev nr_segs fix
>
> aio-remove-lseek-triggerable-BUG_ONs.patch
>
> aio-readahead-rework.patch
> Unified page range readahead for aio and regular reads
>
> aio-readahead-speedup.patch
> Readahead issues and AIO read speedup
>
> aio-osync-fix-2.patch
> More AIO O_SYNC related fixes
>
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Regards,
Wiktor Wodecki
[-- Attachment #1.2: lspci --]
[-- Type: text/plain, Size: 7640 bytes --]
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d9000000-dbffffff
Prefetchable memory behind bridge: dc000000-dcffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 9000 [size=16]
Capabilities: <available only to root>
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at 9400 [size=32]
Capabilities: <available only to root>
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at 9800 [size=32]
Capabilities: <available only to root>
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 7
Capabilities: <available only to root>
00:09.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 04)
Subsystem: Triones Technologies, Inc. HPT370A
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at a400 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at ac00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00:0a.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b000 [disabled] [size=256]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:0b.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at b400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at b800 [size=128]
Region 1: Memory at dd001000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00:0d.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 02)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at bc00 [size=256]
Region 1: Memory at dd002000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at c000 [size=256]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0100
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
` (3 preceding siblings ...)
2003-09-10 21:17 ` 2.6.0-test5-mm1 Wiktor Wodecki
@ 2003-09-11 6:53 ` William Lee Irwin III
2003-09-13 9:13 ` 2.6.0-test5-mm1 Alex Riesen
5 siblings, 0 replies; 11+ messages in thread
From: William Lee Irwin III @ 2003-09-11 6:53 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-mm
On Mon, Sep 08, 2003 at 11:50:28PM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test5/2.6.0-test5-mm1/
> Small fixes, mainly.
Here's another one.
any_online_cpu() is required to and with cpu_online_map before
attempting to find an online cpu somewhere in the map; this patch adds
that logic to the implementation(s) of any_online_cpu().
Untested, but apparently necessary e.g. for set_cpus_allowed() not to oops.
-- wli
===== include/asm-generic/cpumask_arith.h 1.1 vs edited =====
--- 1.1/include/asm-generic/cpumask_arith.h Mon Aug 18 19:46:23 2003
+++ edited/include/asm-generic/cpumask_arith.h Wed Sep 10 23:46:36 2003
@@ -27,7 +27,12 @@
#define cpus_shift_right(dst, src, n) do { dst = (src) >> (n); } while (0)
#define cpus_shift_left(dst, src, n) do { dst = (src) << (n); } while (0)
-#define any_online_cpu(map) ({ (map) ? first_cpu(map) : NR_CPUS; })
+#define any_online_cpu(map) \
+({ \
+ cpumask_t __tmp__; \
+ cpus_and(__tmp__, map, cpu_online_map); \
+ __tmp__ ? first_cpu(__tmp__) : NR_CPUS; \
+})
#define CPU_MASK_ALL (~((cpumask_t)0) >> (8*sizeof(cpumask_t) - NR_CPUS))
#define CPU_MASK_NONE ((cpumask_t)0)
===== include/asm-generic/cpumask_array.h 1.1 vs edited =====
--- 1.1/include/asm-generic/cpumask_array.h Mon Aug 18 19:46:23 2003
+++ edited/include/asm-generic/cpumask_array.h Wed Sep 10 23:46:05 2003
@@ -36,7 +36,13 @@
cpu_set(cpu, __cpu_mask); \
__cpu_mask; \
})
-#define any_online_cpu(map) find_first_bit((map).mask, NR_CPUS)
+#define any_online_cpu(map) \
+({ \
+ cpumask_t __tmp__; \
+ cpus_and(__tmp__, map, cpu_online_map); \
+ find_first_bit(__tmp__.mask, NR_CPUS); \
+})
+
/*
* um, these need to be usable as static initializers
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-09 6:50 2.6.0-test5-mm1 Andrew Morton
` (4 preceding siblings ...)
2003-09-11 6:53 ` 2.6.0-test5-mm1 William Lee Irwin III
@ 2003-09-13 9:13 ` Alex Riesen
2003-09-14 8:46 ` 2.6.0-test5-mm1 Andrey Borzenkov
5 siblings, 1 reply; 11+ messages in thread
From: Alex Riesen @ 2003-09-13 9:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Andrey Borzenkov
> really-use-english-date-in-version-string.patch
> really use english date in version string
- echo \#define LINUX_COMPILE_TIME \"`LANG=C date +%T`\"
+ echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
LC_ALL overrides everything, so LANG is not needed anymore. Should be:
+ echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C date +%T`\"
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-13 9:13 ` 2.6.0-test5-mm1 Alex Riesen
@ 2003-09-14 8:46 ` Andrey Borzenkov
2003-09-14 13:52 ` 2.6.0-test5-mm1 Alex Riesen
0 siblings, 1 reply; 11+ messages in thread
From: Andrey Borzenkov @ 2003-09-14 8:46 UTC (permalink / raw)
To: Alex Riesen, linux-kernel; +Cc: Andrew Morton
On Saturday 13 September 2003 13:13, Alex Riesen wrote:
> > really-use-english-date-in-version-string.patch
> > really use english date in version string
>
> - echo \#define LINUX_COMPILE_TIME \"`LANG=C date +%T`\"
> + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
>
> LC_ALL overrides everything, so LANG is not needed anymore. Should be:
>
> + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C date +%T`\"
I need to set three! variables to make man display manpage in english not in
russian. I have no idea which variables all versions of date out there
respect and which one wins. If you are sure LC_ALL is enough for everyone -
so be it.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: 2.6.0-test5-mm1
2003-09-14 8:46 ` 2.6.0-test5-mm1 Andrey Borzenkov
@ 2003-09-14 13:52 ` Alex Riesen
2003-09-14 14:01 ` 2.6.0-test5-mm1 Andrey Borzenkov
0 siblings, 1 reply; 11+ messages in thread
From: Alex Riesen @ 2003-09-14 13:52 UTC (permalink / raw)
To: Andrey Borzenkov; +Cc: linux-kernel, Andrew Morton
Andrey Borzenkov, Sun, Sep 14, 2003 10:46:01 +0200:
> On Saturday 13 September 2003 13:13, Alex Riesen wrote:
> > > really-use-english-date-in-version-string.patch
> > > really use english date in version string
> >
> > - echo \#define LINUX_COMPILE_TIME \"`LANG=C date +%T`\"
> > + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
> >
> > LC_ALL overrides everything, so LANG is not needed anymore. Should be:
> >
> > + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C date +%T`\"
>
> I need to set three! variables to make man display manpage in english not in
> russian. I have no idea which variables all versions of date out there
> respect and which one wins. If you are sure LC_ALL is enough for everyone -
> so be it.
>
$ info libc
...
Categories of Activities that Locales Affect
...
`LC_ALL'
This is not an environment variable; it is only a macro that you
can use with `setlocale' to set a single locale for all purposes.
Setting this environment variable overwrites all selections by the
other `LC_*' variables or `LANG'.
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: 2.6.0-test5-mm1
2003-09-14 13:52 ` 2.6.0-test5-mm1 Alex Riesen
@ 2003-09-14 14:01 ` Andrey Borzenkov
0 siblings, 0 replies; 11+ messages in thread
From: Andrey Borzenkov @ 2003-09-14 14:01 UTC (permalink / raw)
To: Alex Riesen; +Cc: linux-kernel, Andrew Morton
On Sunday 14 September 2003 17:52, Alex Riesen wrote:
> Andrey Borzenkov, Sun, Sep 14, 2003 10:46:01 +0200:
> > On Saturday 13 September 2003 13:13, Alex Riesen wrote:
> > > > really-use-english-date-in-version-string.patch
> > > > really use english date in version string
> > >
> > > - echo \#define LINUX_COMPILE_TIME \"`LANG=C date +%T`\"
> > > + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
> > >
> > > LC_ALL overrides everything, so LANG is not needed anymore. Should be:
> > >
> > > + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C date +%T`\"
> >
> > I need to set three! variables to make man display manpage in english not
> > in russian. I have no idea which variables all versions of date out there
> > respect and which one wins. If you are sure LC_ALL is enough for everyone
> > - so be it.
>
> $ info libc
> ...
> Categories of Activities that Locales Affect
> ...
> `LC_ALL'
> This is not an environment variable;
please quote the correct part of documentation. LC_ALL is environment
variable; usually it should win over separate LC_* variables that in turn win
over LANG. But I repeat - I have no way to verify it for all combinations of
date/libc/glibc out there; autoconf sets all variables it needs to be on safe
side so actually instead of removing LANG I'd rather add LC_TIME.
-andrey
it is only a macro that you
> can use with `setlocale' to set a single locale for all purposes.
> Setting this environment variable overwrites all selections by the
> other `LC_*' variables or `LANG'.
^ permalink raw reply [flat|nested] 11+ messages in thread