2.6.0-test11: sbp2 trouble

2.6.0-test11: sbp2 trouble

[Jurgen Kramer]

I am experiencing sbp2 problems With the current test11. Somehow
it keeps telling me that it has problems logging in to one of my
external sbp2 devices.

ieee1394: sbp2: Error logging into SBP-2 device - login timed-out

This is even after I do a power cycle on the failing device.

I have two IEEE1394 interface in my system. One is a onboard VIA
controller the other one is on a Audigy2 card.

ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[feaff800-feafffff]  Max
Packet=[2048]
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[feaff000-feaff7ff]  Max
Packet=[2048]

The SBP2 module only seems to be able to log in to the device connected
to the Audigy2 firewire controller. The kernel is compiled with SMP
enabled.

Jurgen

Re: 2.6.0-test11: sbp2 trouble

[Ben Collins]

On Fri, Nov 28, 2003 at 05:23:06PM +0100, Jurgen Kramer wrote:
> I am experiencing sbp2 problems With the current test11. Somehow
> it keeps telling me that it has problems logging in to one of my
> external sbp2 devices.
> 
> ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
> 
> This is even after I do a power cycle on the failing device.
> 
> I have two IEEE1394 interface in my system. One is a onboard VIA
> controller the other one is on a Audigy2 card.
> 
> ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
> ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[feaff800-feafffff]  Max
> Packet=[2048]
> ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[feaff000-feaff7ff]  Max
> Packet=[2048]
> 
> The SBP2 module only seems to be able to log in to the device connected
> to the Audigy2 firewire controller. The kernel is compiled with SMP
> enabled.

Can you do a ps and show me what the two knodemgrd's look like?

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/

Re: 2.6.0-test11: sbp2 trouble

[Jurgen Kramer]

> Can you do a ps and show me what the two knodemgrd's look like?

Here it goes:

[root@paragon root]# ps -ef|grep knode
root      9891     1  0 20:33 ?        00:00:00 [knodemgrd_0]
root      9892     1  0 20:33 ?        00:00:00 [knodemgrd_1]

Hope that helps. Also included some more dmesg output

ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[feaff800-feafffff]  Max
Packet=[2048]
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[feaff000-feaff7ff]  Max
Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800001eea32]
ieee1394: Node added: ID:BUS[0-01:1023]  GUID[0030e00050000aa0]
ieee1394: The root node is not cycle master capable; selecting a new
root node and resetting...
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
sbp2: $Rev: 1034 $ Ben Collins <bcollins@debian.org>
scsi3 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
ieee1394: Node added: ID:BUS[1-00:1023]  GUID[0030e001700104bf]
ieee1394: Host added: ID:BUS[1-02:1023]  GUID[00023c00c100cb72]
scsi4 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
  Vendor: IomintSA  Model: MCE3130AP-MO1300  Rev: 0011
  Type:   Optical Device                     ANSI SCSI revision: 02
ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
ieee1394: sbp2: Error logging into SBP-2 device - login failed
ieee1394: sbp2: sbp2_reconnect_device failed!
ieee1394: sbp2: Error logging into SBP-2 device - login timed-out