emu10k1 under kernel 2.6?

emu10k1 under kernel 2.6?

[Heinz Ulrich Stille]

Hi!

I feel I must be missing something obvious, but I just can't get the SB
Live to work with a 2.6 kernel. The module snd-emu10k1 depends on
snd-ac97-codec, which doesn't load and says:

ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6

It's working just fine with kernel 2.4. What's wrong now?

MfG, Ulrich

-- 
Heinz Ulrich Stille / Tel.: +49-541-9400463 / Fax: +49-541-9400450
design_d gmbh / Lortzingstr. 2 / 49074 Osnabrück / www.design-d.de

Re: emu10k1 under kernel 2.6?

[Eric Sandall]

Quoting Heinz Ulrich Stille <hus@design-d.de>:
> Hi!
> 
> I feel I must be missing something obvious, but I just can't get the SB
> Live to work with a 2.6 kernel. The module snd-emu10k1 depends on
> snd-ac97-codec, which doesn't load and says:
> 
> ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
> EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6
> 
> It's working just fine with kernel 2.4. What's wrong now?
> 
> MfG, Ulrich

You have to setup your sound drivers in the kernel now (either OSS or ALSA, the
latter is preferred). I have my SB Live! working on all of the 2.6 kernels
(including the -mm patchsets).

Also, a quick Google search[0] returns at least one page (it shows 10 pages) of
usefull information.

-sandalle

[0] Searching for: AC'97 0:0 does not respond

-- 
PGP Key Fingerprint:  FCFF 26A1 BE21 08F4 BB91  FAED 1D7B 7D74 A8EF DD61
http://search.keyserver.net:11371/pks/lookup?op=get&search=0xA8EFDD61

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/E/IT$ d-- s++:+>: a-- C++(+++) BL++++VIS>$ P+(++) L+++ E-(---) W++ N+@ o?
K? w++++>-- O M-@ V-- PS+(+++) PE(-) Y++(+) PGP++(+) t+() 5++ X(+) R+(++)
tv(--)b++(+++) DI+@ D++(+++) G>+++ e>+++ h---(++) r++ y+
------END GEEK CODE BLOCK------

Eric Sandall                     |  Source Mage GNU/Linux Developer
eric@sandall.us                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Inst. Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

Re: emu10k1 under kernel 2.6?

[Heinz Ulrich Stille]

On Tuesday 02 December 2003 18:43, Eric Sandall wrote:
> Quoting Heinz Ulrich Stille <hus@design-d.de>:
> > ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
> > EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6
[...]
> You have to setup your sound drivers in the kernel now (either OSS or ALSA,
> the latter is preferred). I have my SB Live! working on all of the 2.6
> kernels (including the -mm patchsets).

I'm using ALSA in 2.4 as well as in 2.6, but where can I find a setup?

> Also, a quick Google search[0] returns at least one page (it shows 10
> pages) of usefull information.

Hm, looks like I tried the wrong set of words. Even now I did not find
anything definitive, but I got the impression that IRQ sharing does not
work anymore (I never checked that - I've got exactly two cards on my
board, graphics and sound and guess what - I seem to have picked the one
PCI slot that shares it's IRQ with AGP...).
Could that really be the problem? It does work with 2.4.

Btw, the system is SMP, a Tyan Tiger MPX with two Athlon XPs.

MfG, Ulrich

-- 
Heinz Ulrich Stille / Tel.: +49-541-9400463 / Fax: +49-541-9400450
design_d gmbh / Lortzingstr. 2 / 49074 Osnabrück / www.design-d.de

Re: emu10k1 under kernel 2.6?

[Daniel Gryniewicz]

On Wed, 2003-12-03 at 06:25, Heinz Ulrich Stille wrote:
> On Tuesday 02 December 2003 18:43, Eric Sandall wrote:
> > Quoting Heinz Ulrich Stille <hus@design-d.de>:
> > > ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
> > > EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6
> [...]
> > You have to setup your sound drivers in the kernel now (either OSS or ALSA,
> > the latter is preferred). I have my SB Live! working on all of the 2.6
> > kernels (including the -mm patchsets).
> 
> I'm using ALSA in 2.4 as well as in 2.6, but where can I find a setup?
> 
> > Also, a quick Google search[0] returns at least one page (it shows 10
> > pages) of usefull information.
> 
> Hm, looks like I tried the wrong set of words. Even now I did not find
> anything definitive, but I got the impression that IRQ sharing does not
> work anymore (I never checked that - I've got exactly two cards on my
> board, graphics and sound and guess what - I seem to have picked the one
> PCI slot that shares it's IRQ with AGP...).
> Could that really be the problem? It does work with 2.4.
> 
> Btw, the system is SMP, a Tyan Tiger MPX with two Athlon XPs.

I have a tyan tiger MP with two Athlon MPs, and my emu10k1 does not work
with ALSA on 2.4.  I haven't looked into it closely, as I don't really
use sound on this box, but maybe it's a SMP thing?  Probably not the
right list for this, but it's a datapoint.
-- 
Daniel Gryniewicz <dang@fprintf.net>