* [BK PATCH 2/3] Teach kbuild to pull files from BK repository
@ 2003-12-05 3:32 David Dillow
0 siblings, 0 replies; only message in thread
From: David Dillow @ 2003-12-05 3:32 UTC (permalink / raw)
To: linux-kernel; +Cc: kbuild-devel
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1505 -> 1.1506
# scripts/kconfig/lkc.h 1.5 -> 1.6
# Makefile 1.440 -> 1.441
# scripts/kconfig/zconf.l 1.7 -> 1.8
# scripts/kconfig/lex.zconf.c_shipped 1.7 -> 1.8
# scripts/kconfig/Makefile 1.11 -> 1.12
# (new) -> 1.1 scripts/depkconfig
# (new) -> 1.1 scripts/kconfig/listkconfigs.c
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/12/04 dave@thedillows.org 1.1506
# Teach the kbuild system how to retrieve the Kconfig files from
# the repository. This involves modifying the kconfig lexer/parser
# to give us a list of sourced Kconfig files so that we can tell
# make about the dependencies. Then is just a matter of makeing sure
# that make will extract those files before they are needed in the
# build process.
# --------------------------------------------
#
diff -Nru a/Makefile b/Makefile
--- a/Makefile Thu Dec 4 00:24:45 2003
+++ b/Makefile Thu Dec 4 00:24:45 2003
@@ -308,7 +308,7 @@
scripts/docproc scripts/split-include : scripts ;
.PHONY: scripts scripts/fixdep
-scripts:
+scripts: kbuild_files
$(Q)$(MAKE) $(build)=scripts
scripts/fixdep:
@@ -329,6 +329,7 @@
config-targets := 0
mixed-targets := 0
dot-config := 1
+config-type :=
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
@@ -338,6 +339,7 @@
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
config-targets := 1
+ config-type := $(filter config %config,$(MAKECMDGOALS))
ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
mixed-targets := 1
endif
@@ -357,9 +359,7 @@
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
-%config: scripts/fixdep FORCE
- $(Q)$(MAKE) $(build)=scripts/kconfig $@
-config : scripts/fixdep FORCE
+$(config-type) : scripts/fixdep FORCE
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
@@ -941,6 +941,10 @@
# Rules to automatically check files out of the repository during build
# ===========================================================================
+# Don't need these if doing an out-of-tree build
+#
+ifeq ($(KBUILD_SRC),)
+
# Command to use to perform actual pull of a file from the repository
GET = get
export GET
@@ -958,11 +962,35 @@
kbuild_base_files += scripts/Makefile.repo scripts/mkversion
kbuild_base_files += scripts/getfiles scripts/mkcompile_h
-# This rule will ensure these files exist, or are pulled from the repository
-.get_kbuild_files.d: $(kbuild_base_files)
+# These rules will ensure these files exist, or are pulled from the repository
+.PHONY: kbuild_files
+kbuild_files: $(kbuild_base_files) ;
+
+.get_kbuild_files.d: kbuild_files
$(Q)touch .get_kbuild_files.d
-include .get_kbuild_files.d
+
+# These targets do not require the Kconfig files. Everything else does.
+nokconfig_targets := help clean mrproper distclean
+
+scripts/kconfig/listkconfigs: scripts FORCE
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+ifeq ($(filter $(nokconfig_targets),$(MAKECMDGOALS)),)
+
+quiet_cmd_kconfig_checkout_dep = GENDEP $<
+cmd_kconfig_checkout_dep = $(srctree)/scripts/depkconfig $< $@
+
+.checkout_Kconfig.d: scripts/depkconfig
+.checkout_Kconfig.d: scripts/kconfig/listkconfigs
+.checkout_Kconfig.d: arch/$(ARCH)/Kconfig
+ $(call cmd,kconfig_checkout_dep)
+
+-include .checkout_Kconfig.d
+
+endif # filter on nokconfig_targtes
+endif # ifeq ($(KBUILD_SRC),)
include $(srctree)/scripts/Makefile.repo
diff -Nru a/scripts/depkconfig b/scripts/depkconfig
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/scripts/depkconfig Thu Dec 4 00:24:45 2003
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Script to convert the output of listkconfig to a form make will understand.
+# The output from this script is in the form of a Makefile fragment, and
+# makes the output file depend on every Kconfig file seen.
+#
+# Copyright (C) 2003 David Dillow <dave@thedillows.org>
+#
+# Released under the GNU GPL, see COPYING for details
+#
+
+usage() {
+ echo "usage: depkconfig <starting Kconfig> <output file>\n" 1>&2
+ echo -e "\tconvert sourced Kconfig files from starting file into" 1>&2
+ echo -e "\tmake dependency rules in output file" 1>&2
+ exit 2
+}
+
+mark_precious() {
+ precious="$precious $1"
+}
+
+add_kconfig() {
+ kconfigs="$kconfigs $1"
+}
+
+[[ $# -eq 2 ]] || usage
+
+in=$1
+out=$2
+
+if [[ ! -e $in ]]; then
+ echo "depkconfig: $in does not exist!" 1>&2
+ exit 1
+fi
+
+kconfigs=""
+precious=""
+
+mark_precious $in
+add_kconfig $in
+
+for file in `scripts/kconfig/listkconfigs $in | grep ^KDEP | cut -f2- -d' '`;
+do
+ mark_precious $file
+ add_kconfig $file
+done
+
+cat /dev/null > $out
+for file in $kconfigs; do
+ echo "$out: $file" >> $out
+done
+
+[[ $precious ]] && echo -n ".PRECIOUS:" >> $out
+for file in $precious; do
+ echo -n " $file" >> $out
+done
+echo >> $out
diff -Nru a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
--- a/scripts/kconfig/Makefile Thu Dec 4 00:24:45 2003
+++ b/scripts/kconfig/Makefile Thu Dec 4 00:24:45 2003
@@ -56,20 +56,24 @@
# ===========================================================================
# Shared Makefile for the various kconfig executables:
-# conf: Used for defconfig, oldconfig and related targets
-# mconf: Used for the mconfig target.
-# Utilizes the lxdialog package
-# qconf: Used for the xconfig target
-# Based on QT which needs to be installed to compile it
-# gconf: Used for the gconfig target
-# Based on GTK which needs to be installed to compile it
+# conf: Used for defconfig, oldconfig and related targets
+# mconf: Used for the mconfig target.
+# Utilizes the lxdialog package
+# qconf: Used for the xconfig target
+# Based on QT which needs to be installed to compile it
+# gconf: Used for the gconfig target
+# Based on GTK which needs to be installed to compile it
+# listkconfigs: Used to generate a list of Kconfigs so that make will
+# pull them from the repository for us
+#
# object files used by all kconfig flavours
libkconfig-objs := zconf.tab.o
-host-progs := conf mconf qconf gconf
-conf-objs := conf.o libkconfig.so
-mconf-objs := mconf.o libkconfig.so
+host-progs := conf mconf qconf gconf listkconfigs
+conf-objs := conf.o libkconfig.so
+mconf-objs := mconf.o libkconfig.so
+listkconfigs-objs := listkconfigs.o libkconfig.so
ifeq ($(MAKECMDGOALS),xconfig)
qconf-target := 1
@@ -102,6 +106,7 @@
HOSTCFLAGS_gconf.o = `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --cflags`
$(obj)/conf.o $(obj)/mconf.o $(obj)/qconf.o $(obj)/gconf.o: $(obj)/zconf.tab.h
+$(obj)/listkconfigs.o: $(obj)/zconf.tab.h
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
diff -Nru a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped
--- a/scripts/kconfig/lex.zconf.c_shipped Thu Dec 4 00:24:45 2003
+++ b/scripts/kconfig/lex.zconf.c_shipped Thu Dec 4 00:24:45 2003
@@ -1,5 +1,6 @@
+#line 2 "scripts/kconfig/lex.zconf.c"
-#line 3 "lex.zconf.c"
+#line 4 "scripts/kconfig/lex.zconf.c"
#define YY_INT_ALIGNED short int
@@ -1997,7 +1998,9 @@
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *zconftext;
+#line 1 "scripts/kconfig/zconf.l"
+#line 5 "scripts/kconfig/zconf.l"
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
* Released under the terms of the GNU GPL v2.0.
@@ -2030,6 +2033,8 @@
static void zconf_endhelp(void);
static struct buffer *zconf_endfile(void);
+int zconf_print_sources;
+
void new_string(void)
{
text = malloc(START_STRSIZE);
@@ -2059,6 +2064,7 @@
memcpy(text, str, size);
text[size] = 0;
}
+#line 2068 "scripts/kconfig/lex.zconf.c"
#define INITIAL 0
#define COMMAND 1
@@ -2195,9 +2201,13 @@
register char *yy_cp, *yy_bp;
register int yy_act;
+#line 73 "scripts/kconfig/zconf.l"
+
int str = 0;
int ts, i;
+#line 2210 "scripts/kconfig/lex.zconf.c"
+
if ( (yy_init) )
{
(yy_init) = 0;
@@ -2255,25 +2265,30 @@
case 1:
/* rule 1 can match eol */
YY_RULE_SETUP
+#line 77 "scripts/kconfig/zconf.l"
current_file->lineno++;
YY_BREAK
case 2:
YY_RULE_SETUP
+#line 78 "scripts/kconfig/zconf.l"
YY_BREAK
case 3:
/* rule 3 can match eol */
YY_RULE_SETUP
+#line 80 "scripts/kconfig/zconf.l"
current_file->lineno++; return T_EOL;
YY_BREAK
case 4:
YY_RULE_SETUP
+#line 82 "scripts/kconfig/zconf.l"
{
BEGIN(COMMAND);
}
YY_BREAK
case 5:
YY_RULE_SETUP
+#line 86 "scripts/kconfig/zconf.l"
{
unput(zconftext[0]);
BEGIN(COMMAND);
@@ -2282,122 +2297,152 @@
case 6:
YY_RULE_SETUP
+#line 93 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_MAINMENU;
YY_BREAK
case 7:
YY_RULE_SETUP
+#line 94 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_MENU;
YY_BREAK
case 8:
YY_RULE_SETUP
+#line 95 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_ENDMENU;
YY_BREAK
case 9:
YY_RULE_SETUP
+#line 96 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_SOURCE;
YY_BREAK
case 10:
YY_RULE_SETUP
+#line 97 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_CHOICE;
YY_BREAK
case 11:
YY_RULE_SETUP
+#line 98 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_ENDCHOICE;
YY_BREAK
case 12:
YY_RULE_SETUP
+#line 99 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_COMMENT;
YY_BREAK
case 13:
YY_RULE_SETUP
+#line 100 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_CONFIG;
YY_BREAK
case 14:
YY_RULE_SETUP
+#line 101 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_MENUCONFIG;
YY_BREAK
case 15:
YY_RULE_SETUP
+#line 102 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_HELP;
YY_BREAK
case 16:
YY_RULE_SETUP
+#line 103 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_IF;
YY_BREAK
case 17:
YY_RULE_SETUP
+#line 104 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_ENDIF;
YY_BREAK
case 18:
YY_RULE_SETUP
+#line 105 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_DEPENDS;
YY_BREAK
case 19:
YY_RULE_SETUP
+#line 106 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_REQUIRES;
YY_BREAK
case 20:
YY_RULE_SETUP
+#line 107 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_OPTIONAL;
YY_BREAK
case 21:
YY_RULE_SETUP
+#line 108 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_DEFAULT;
YY_BREAK
case 22:
YY_RULE_SETUP
+#line 109 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_PROMPT;
YY_BREAK
case 23:
YY_RULE_SETUP
+#line 110 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_TRISTATE;
YY_BREAK
case 24:
YY_RULE_SETUP
+#line 111 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_DEF_TRISTATE;
YY_BREAK
case 25:
YY_RULE_SETUP
+#line 112 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_BOOLEAN;
YY_BREAK
case 26:
YY_RULE_SETUP
+#line 113 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_BOOLEAN;
YY_BREAK
case 27:
YY_RULE_SETUP
+#line 114 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_DEF_BOOLEAN;
YY_BREAK
case 28:
YY_RULE_SETUP
+#line 115 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_DEF_BOOLEAN;
YY_BREAK
case 29:
YY_RULE_SETUP
+#line 116 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_INT;
YY_BREAK
case 30:
YY_RULE_SETUP
+#line 117 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_HEX;
YY_BREAK
case 31:
YY_RULE_SETUP
+#line 118 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_STRING;
YY_BREAK
case 32:
YY_RULE_SETUP
+#line 119 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_SELECT;
YY_BREAK
case 33:
YY_RULE_SETUP
+#line 120 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_SELECT;
YY_BREAK
case 34:
YY_RULE_SETUP
+#line 121 "scripts/kconfig/zconf.l"
BEGIN(PARAM); return T_RANGE;
YY_BREAK
case 35:
YY_RULE_SETUP
+#line 122 "scripts/kconfig/zconf.l"
{
alloc_string(zconftext, zconfleng);
zconflval.string = text;
@@ -2406,52 +2451,65 @@
YY_BREAK
case 36:
YY_RULE_SETUP
+#line 127 "scripts/kconfig/zconf.l"
YY_BREAK
case 37:
/* rule 37 can match eol */
YY_RULE_SETUP
+#line 128 "scripts/kconfig/zconf.l"
current_file->lineno++; BEGIN(INITIAL);
YY_BREAK
+
case 38:
YY_RULE_SETUP
+#line 132 "scripts/kconfig/zconf.l"
return T_AND;
YY_BREAK
case 39:
YY_RULE_SETUP
+#line 133 "scripts/kconfig/zconf.l"
return T_OR;
YY_BREAK
case 40:
YY_RULE_SETUP
+#line 134 "scripts/kconfig/zconf.l"
return T_OPEN_PAREN;
YY_BREAK
case 41:
YY_RULE_SETUP
+#line 135 "scripts/kconfig/zconf.l"
return T_CLOSE_PAREN;
YY_BREAK
case 42:
YY_RULE_SETUP
+#line 136 "scripts/kconfig/zconf.l"
return T_NOT;
YY_BREAK
case 43:
YY_RULE_SETUP
+#line 137 "scripts/kconfig/zconf.l"
return T_EQUAL;
YY_BREAK
case 44:
YY_RULE_SETUP
+#line 138 "scripts/kconfig/zconf.l"
return T_UNEQUAL;
YY_BREAK
case 45:
YY_RULE_SETUP
+#line 139 "scripts/kconfig/zconf.l"
return T_IF;
YY_BREAK
case 46:
YY_RULE_SETUP
+#line 140 "scripts/kconfig/zconf.l"
return T_ON;
YY_BREAK
case 47:
YY_RULE_SETUP
+#line 141 "scripts/kconfig/zconf.l"
{
str = zconftext[0];
new_string();
@@ -2461,14 +2519,17 @@
case 48:
/* rule 48 can match eol */
YY_RULE_SETUP
+#line 146 "scripts/kconfig/zconf.l"
BEGIN(INITIAL); current_file->lineno++; return T_EOL;
YY_BREAK
case 49:
YY_RULE_SETUP
+#line 147 "scripts/kconfig/zconf.l"
/* ignore */
YY_BREAK
case 50:
YY_RULE_SETUP
+#line 148 "scripts/kconfig/zconf.l"
{
alloc_string(zconftext, zconfleng);
zconflval.string = text;
@@ -2477,29 +2538,35 @@
YY_BREAK
case 51:
YY_RULE_SETUP
+#line 153 "scripts/kconfig/zconf.l"
/* comment */
YY_BREAK
case 52:
/* rule 52 can match eol */
YY_RULE_SETUP
+#line 154 "scripts/kconfig/zconf.l"
current_file->lineno++;
YY_BREAK
case 53:
YY_RULE_SETUP
+#line 155 "scripts/kconfig/zconf.l"
YY_BREAK
case YY_STATE_EOF(PARAM):
+#line 156 "scripts/kconfig/zconf.l"
{
BEGIN(INITIAL);
}
YY_BREAK
+
case 54:
/* rule 54 can match eol */
*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
+#line 162 "scripts/kconfig/zconf.l"
{
append_string(zconftext, zconfleng);
zconflval.string = text;
@@ -2508,6 +2575,7 @@
YY_BREAK
case 55:
YY_RULE_SETUP
+#line 167 "scripts/kconfig/zconf.l"
{
append_string(zconftext, zconfleng);
}
@@ -2518,6 +2586,7 @@
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
+#line 170 "scripts/kconfig/zconf.l"
{
append_string(zconftext + 1, zconfleng - 1);
zconflval.string = text;
@@ -2526,12 +2595,14 @@
YY_BREAK
case 57:
YY_RULE_SETUP
+#line 175 "scripts/kconfig/zconf.l"
{
append_string(zconftext + 1, zconfleng - 1);
}
YY_BREAK
case 58:
YY_RULE_SETUP
+#line 178 "scripts/kconfig/zconf.l"
{
if (str == zconftext[0]) {
BEGIN(PARAM);
@@ -2544,6 +2615,7 @@
case 59:
/* rule 59 can match eol */
YY_RULE_SETUP
+#line 186 "scripts/kconfig/zconf.l"
{
printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
current_file->lineno++;
@@ -2552,13 +2624,16 @@
}
YY_BREAK
case YY_STATE_EOF(STRING):
+#line 192 "scripts/kconfig/zconf.l"
{
BEGIN(INITIAL);
}
YY_BREAK
+
case 60:
YY_RULE_SETUP
+#line 198 "scripts/kconfig/zconf.l"
{
ts = 0;
for (i = 0; i < zconfleng; i++) {
@@ -2588,6 +2663,7 @@
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
+#line 220 "scripts/kconfig/zconf.l"
{
current_file->lineno++;
zconf_endhelp();
@@ -2597,6 +2673,7 @@
case 62:
/* rule 62 can match eol */
YY_RULE_SETUP
+#line 225 "scripts/kconfig/zconf.l"
{
current_file->lineno++;
append_string("\n", 1);
@@ -2604,6 +2681,7 @@
YY_BREAK
case 63:
YY_RULE_SETUP
+#line 229 "scripts/kconfig/zconf.l"
{
append_string(zconftext, zconfleng);
if (!first_ts)
@@ -2611,6 +2689,7 @@
}
YY_BREAK
case YY_STATE_EOF(HELP):
+#line 234 "scripts/kconfig/zconf.l"
{
zconf_endhelp();
return T_HELPTEXT;
@@ -2619,6 +2698,7 @@
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(COMMAND):
+#line 240 "scripts/kconfig/zconf.l"
{
if (current_buf) {
zconf_endfile();
@@ -2630,8 +2710,10 @@
YY_BREAK
case 64:
YY_RULE_SETUP
+#line 249 "scripts/kconfig/zconf.l"
YY_FATAL_ERROR( "flex scanner jammed" );
YY_BREAK
+#line 2717 "scripts/kconfig/lex.zconf.c"
case YY_END_OF_BUFFER:
{
@@ -3566,6 +3648,8 @@
#undef YY_DECL_IS_OURS
#undef YY_DECL
#endif
+#line 249 "scripts/kconfig/zconf.l"
+
void zconf_starthelp(void)
{
@@ -3580,6 +3664,7 @@
BEGIN(INITIAL);
}
+
/*
* Try to open specified file with following names:
* ./name
@@ -3622,16 +3707,31 @@
void zconf_nextfile(const char *name)
{
- struct file *file = file_lookup(name);
- struct buffer *buf = malloc(sizeof(*buf));
- memset(buf, 0, sizeof(*buf));
+ FILE *nextfile;
+ struct file *file;
+ struct buffer *buf;
+
+ if(zconf_print_sources)
+ printf("KDEP %s\n", name);
+
+ nextfile = zconf_fopen(name);
+ if (!nextfile) {
+ /* If we're just here to find filenames, it's not fatal
+ * for a file to be missing...
+ */
+ if(zconf_print_sources)
+ return;
- current_buf->state = YY_CURRENT_BUFFER;
- zconfin = zconf_fopen(name);
- if (!zconfin) {
printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name);
exit(1);
}
+
+ file = file_lookup(name);
+ buf = malloc(sizeof(*buf));
+ memset(buf, 0, sizeof(*buf));
+
+ current_buf->state = YY_CURRENT_BUFFER;
+ zconfin = nextfile;
zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE));
buf->parent = current_buf;
current_buf = buf;
diff -Nru a/scripts/kconfig/listkconfigs.c b/scripts/kconfig/listkconfigs.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/scripts/kconfig/listkconfigs.c Thu Dec 4 00:24:45 2003
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2003 David Dillow <dave@thedillows.org>
+ * Released under the terms of the GNU GPL, see COPYING for details
+ */
+#include <stdio.h>
+#include <stdlib.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+int main(int argc, char **argv)
+{
+ if(argc != 2) {
+ fprintf(stderr, "usage: %s inputfile\n", argv[0]);
+ exit(2);
+ }
+
+ /* tell the zconf parser to just print the files we source */
+ zconf_print_sources = 1;
+ conf_parse(argv[1]);
+ exit(0);
+}
diff -Nru a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
--- a/scripts/kconfig/lkc.h Thu Dec 4 00:24:45 2003
+++ b/scripts/kconfig/lkc.h Thu Dec 4 00:24:45 2003
@@ -34,6 +34,8 @@
int zconf_lineno(void);
char *zconf_curname(void);
+extern int zconf_print_sources;
+
/* confdata.c */
extern const char conf_def_filename[];
extern char conf_filename[];
diff -Nru a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
--- a/scripts/kconfig/zconf.l Thu Dec 4 00:24:45 2003
+++ b/scripts/kconfig/zconf.l Thu Dec 4 00:24:45 2003
@@ -34,6 +34,8 @@
static void zconf_endhelp(void);
static struct buffer *zconf_endfile(void);
+int zconf_print_sources;
+
void new_string(void)
{
text = malloc(START_STRSIZE);
@@ -301,16 +303,31 @@
void zconf_nextfile(const char *name)
{
- struct file *file = file_lookup(name);
- struct buffer *buf = malloc(sizeof(*buf));
- memset(buf, 0, sizeof(*buf));
+ FILE *nextfile;
+ struct file *file;
+ struct buffer *buf;
+
+ if(zconf_print_sources)
+ printf("KDEP %s\n", name);
+
+ nextfile = zconf_fopen(name);
+ if (!nextfile) {
+ /* If we're just here to find filenames, it's not fatal
+ * for a file to be missing...
+ */
+ if(zconf_print_sources)
+ return;
- current_buf->state = YY_CURRENT_BUFFER;
- yyin = zconf_fopen(name);
- if (!yyin) {
printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name);
exit(1);
}
+
+ file = file_lookup(name);
+ buf = malloc(sizeof(*buf));
+ memset(buf, 0, sizeof(*buf));
+
+ current_buf->state = YY_CURRENT_BUFFER;
+ yyin = nextfile;
yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
buf->parent = current_buf;
current_buf = buf;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-12-05 3:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-05 3:32 [BK PATCH 2/3] Teach kbuild to pull files from BK repository David Dillow
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).