* UHCI-HCD && mosedev on 2.6.0-test11
@ 2003-12-16 0:55 Carlos Jiménez
2003-12-16 17:46 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Carlos Jiménez @ 2003-12-16 0:55 UTC (permalink / raw)
To: linux-kernel
Hello,
I have an usbmouse that works on 2.4.x kernel series.
now on 2.6.0 usb module hangs, and does not work with it.
Tests are made on centrino laptop (00:1d.0 USB Controller: Intel Corp.
82801DB USB) on 2.6.0-test[9-11] series on gentoo linux.
Error:
Dec 16 01:41:42 kardon kernel: usb 2-2: USB disconnect, address 2
Dec 16 01:41:42 kardon kernel: printing eip:
Dec 16 01:41:42 kardon kernel: c0159683
Dec 16 01:41:42 kardon kernel: Oops: 0000 [#1]
Dec 16 01:41:42 kardon kernel: CPU: 0
Dec 16 01:41:42 kardon kernel: EIP: 0060:[<c0159683>] Not tainted
Dec 16 01:41:42 kardon kernel: EFLAGS: 00010296
Dec 16 01:41:42 kardon kernel: EIP is at __lookup_hash+0x1b/0xd0
Dec 16 01:41:42 kardon kernel: eax: cf411e98 ebx: 12fd28db ecx:
ffffffff edx: 01b9ec71
Dec 16 01:41:42 kardon kernel: esi: c03a7218 edi: 00000000 ebp:
00000000 esp: cf411e5c
Dec 16 01:41:42 kardon kernel: ds: 007b es: 007b ss: 0068
Dec 16 01:41:42 kardon kernel: Process khubd (pid: 2642,
threadinfo=cf410000 task=cf830cc0)
Dec 16 01:41:42 kardon kernel: Stack: c036f8c0 cf411e8c 00000000
12fd28db c03a7218 c034053c ce5ae528 c0159757
Dec 16 01:41:42 kardon kernel: cf411e98 00000000 00000000
c017a998 cf411e98 00000000 00000282 c0340537
Dec 16 01:41:42 kardon kernel: 00000005 12fd28db 00000282
cdf5a894 ce5ae400 c017be33 00000000 c0340537
Dec 16 01:41:42 kardon kernel: Call Trace:
Dec 16 01:41:42 kardon kernel: [<c0159757>] lookup_hash+0x1f/0x23
Dec 16 01:41:42 kardon kernel: [<c017a998>] sysfs_get_dentry+0x6a/0x70
Dec 16 01:41:42 kardon kernel: [<c017be33>]
sysfs_remove_group+0x65/0x6a
Dec 16 01:41:42 kardon kernel: [<c023e662>] dpm_sysfs_remove+0x1a/0x20
Dec 16 01:41:42 kardon kernel: [<c023e12b>] device_pm_remove+0x26/0x71
Dec 16 01:41:42 kardon kernel: [<c023bcff>] device_del+0x65/0x9b
Dec 16 01:41:42 kardon kernel: [<d1adfbd4>]
usb_disable_device+0xdb/0x116 [usbcore]
Dec 16 01:41:42 kardon kernel: [<d1ad9c85>] usb_disconnect+0x9f/0x12f
[usbcore]
Dec 16 01:41:42 kardon kernel: [<d1adc790>]
hub_port_connect_change+0x399/0x39e [usbcore]
Dec 16 01:41:42 kardon kernel: [<d1adcb9c>] hub_events+0x407/0x470
[usbcore]
Dec 16 01:41:42 kardon kernel: [<d1adcc32>] hub_thread+0x2d/0xf7
[usbcore]
Dec 16 01:41:42 kardon kernel: [<c011a1f4>]
default_wake_function+0x0/0x12
Dec 16 01:41:42 kardon kernel: [<d1adcc05>] hub_thread+0x0/0xf7
[usbcore]
Dec 16 01:41:42 kardon kernel: [<c0107289>]
kernel_thread_helper+0x5/0xb
Dec 16 01:41:42 kardon kernel:
Dec 16 01:41:42 kardon kernel: Code: 8b 77 08 89 6c 24 08 c7 44 24 04 01
00 00 00 89 34 24 e8 30
Dec 16 01:41:42 kardon kernel: <7>drivers/usb/host/uhci-hcd.c: efe0:
suspend_hc
Any ideas tos solve it? tnx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: UHCI-HCD && mosedev on 2.6.0-test11
2003-12-16 0:55 UHCI-HCD && mosedev on 2.6.0-test11 Carlos Jiménez
@ 2003-12-16 17:46 ` Greg KH
2003-12-17 0:33 ` Carlos Jiménez
0 siblings, 1 reply; 6+ messages in thread
From: Greg KH @ 2003-12-16 17:46 UTC (permalink / raw)
To: Carlos Jiménez; +Cc: linux-kernel
On Tue, Dec 16, 2003 at 01:55:34AM +0100, Carlos Jiménez wrote:
> Hello,
>
> I have an usbmouse that works on 2.4.x kernel series.
> now on 2.6.0 usb module hangs, and does not work with it.
Did this happen when you removed the device? Can you try the latest -bk
tree? There have been a number of fixes that will hopefully fix this
problem for you.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: UHCI-HCD && mosedev on 2.6.0-test11
2003-12-16 17:46 ` Greg KH
@ 2003-12-17 0:33 ` Carlos Jiménez
2003-12-17 0:55 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Carlos Jiménez @ 2003-12-17 0:33 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel
ok thanx I'll try it, and i'll notify you
Excuse my english (I am from spain, and I not practice english too much
:)
On 2.6.0-alltest (not yet probed with bk) all usb devices works good
(usb-storage with an aiptek cam, and usbfloppy).
When I plug in that mouse, usbview shows it as an unrecognized device.
The device does not work at all, cat /dev/input/mice , cat
/dev/input/mouse0 and cat /dev/usbmouse shows anything when I move the
usbmouse, (on 2.4.2x kernel device works good, and I was wathcing ascii
characters, when I was moving it).
Then, when I removed the device, or when i try to unload uhci-hcd (while
device is plugged) kernel show that info, and all about usb goes down. I
cant unload, load, anything about modules, and I have to use sync before
poweroff to power off the system whithout breakin filesystems.
thank you for all. I'll try bk tree to see if this error is yet fixed on
it.
El mar, 16-12-2003 a las 18:46, Greg KH escribió:
> On Tue, Dec 16, 2003 at 01:55:34AM +0100, Carlos Jiménez wrote:
> > Hello,
> >
> > I have an usbmouse that works on 2.4.x kernel series.
> > now on 2.6.0 usb module hangs, and does not work with it.
>
> Did this happen when you removed the device? Can you try the latest -bk
> tree? There have been a number of fixes that will hopefully fix this
> problem for you.
>
> thanks,
>
> greg k-h
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: UHCI-HCD && mosedev on 2.6.0-test11
2003-12-17 0:33 ` Carlos Jiménez
@ 2003-12-17 0:55 ` Greg KH
2003-12-17 10:18 ` Carlos Jiménez
2003-12-19 12:13 ` Carlos Jiménez
0 siblings, 2 replies; 6+ messages in thread
From: Greg KH @ 2003-12-17 0:55 UTC (permalink / raw)
To: Carlos Jiménez; +Cc: linux-kernel
On Wed, Dec 17, 2003 at 01:33:48AM +0100, Carlos Jiménez wrote:
> ok thanx I'll try it, and i'll notify you
>
> Excuse my english (I am from spain, and I not practice english too much
> :)
>
> On 2.6.0-alltest (not yet probed with bk) all usb devices works good
> (usb-storage with an aiptek cam, and usbfloppy).
>
> When I plug in that mouse, usbview shows it as an unrecognized device.
What does /proc/bus/usb/devices show with the mouse plugged in? Do you
have the usb hid driver loaded?
> The device does not work at all, cat /dev/input/mice , cat
> /dev/input/mouse0 and cat /dev/usbmouse shows anything when I move the
> usbmouse, (on 2.4.2x kernel device works good, and I was wathcing ascii
> characters, when I was moving it).
>
> Then, when I removed the device, or when i try to unload uhci-hcd (while
> device is plugged) kernel show that info, and all about usb goes down. I
> cant unload, load, anything about modules, and I have to use sync before
> poweroff to power off the system whithout breakin filesystems.
Yeah, there are still some races there. Hopefully the latest -bk tree
(or test11) will fix a lot of these.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: UHCI-HCD && mosedev on 2.6.0-test11
2003-12-17 0:55 ` Greg KH
@ 2003-12-17 10:18 ` Carlos Jiménez
2003-12-19 12:13 ` Carlos Jiménez
1 sibling, 0 replies; 6+ messages in thread
From: Carlos Jiménez @ 2003-12-17 10:18 UTC (permalink / raw)
To: linux-kernel
The device does not use hid, it was supported on 2.4 with mousedev.
(Mousedev is compiled into my kernel, I can not select it as module, No
tristate at all in menuconfig).
26.0-test11-bk12 fails and print out to messages more info.
When I start computer, and mouse is plugged in.
ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2
ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64
bit addr
ehci_hcd 0000:00:1d.7: capability 0001 at 68
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem d18adc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1
period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
ehci_hcd 0000:00:1d.7: root hub device address 1
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID
0x409
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.0-test11-bk12 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
drivers/usb/core/usb.c: usb_hotplug
usb usb1: registering 1-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: Port indicators are not supported
hub 1-0:1.0: power on to power good time: 0ms
hub 1-0:1.0: hub controller current requirement: 0mA
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
driver v2.1
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000efe0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:1d.0: root hub device address 1
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID
0x409
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.0-test11-bk12 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
drivers/usb/core/usb.c: usb_hotplug
usb usb2: registering 2-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: ganged power switching
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: Port indicators are not supported
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: hub controller current requirement: 0mA
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: enabling power on all ports
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC
CONNECT
hub 1-0:1.0: port 1, status 501, change 1, 480 Mb/s
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0000ef80
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:1d.1: root hub device address 1
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID
0x409
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.0-test11-bk12 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
drivers/usb/core/usb.c: usb_hotplug
usb usb3: registering 3-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: ganged power switching
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: Port indicators are not supported
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: hub controller current requirement: 0mA
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: enabling power on all ports
uhci_hcd 0000:00:1d.2: UHCI Host Controller
hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER
sig=se0 CSC
hub 2-0:1.0: port 1, status 301, change 1, 1.5 Mb/s
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0000ef60
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:1d.2: root hub device address 1
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID
0x409
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.0-test11-bk12 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
drivers/usb/core/usb.c: usb_hotplug
usb usb4: registering 4-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: ganged power switching
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: Port indicators are not supported
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: hub controller current requirement: 0mA
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 4-0:1.0: enabling power on all ports
hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:1.0: new USB device on port 1, assigned address 2
usb 2-1: new device strings: Mfr=0, Product=1, SerialNumber=0
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8240] link (0e4b81b2) element (0e512080)
Element != First TD
0: [ce512040] link (0e512080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=0e52a900)
1: [ce512080] link (0e5120c0) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0e45d380)
2: [ce5120c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: config 0 descriptor??
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03a2d20(lo)
IPv6 over IPv4 tunneling driver
drivers/usb/host/uhci-hcd.c: ef80: suspend_hc
drivers/usb/host/uhci-hcd.c: ef60: suspend_hc
eth0: no IPv6 routers present
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8240] link (0e4b81b2) element (0e512080)
Element != First TD
0: [ce512040] link (0e512080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306ce0)
1: [ce512080] link (0e5120c0) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce5120c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8240] link (0e4b81b2) element (0e512080)
Element != First TD
0: [ce512040] link (0e512080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306ce0)
1: [ce512080] link (0e5120c0) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce5120c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8240] link (0e4b81b2) element (0e512080)
Element != First TD
0: [ce512040] link (0e512080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306f20)
1: [ce512080] link (0e5120c0) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce5120c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8270] link (0e4b81b2) element (0e512140)
Element != First TD
0: [ce512100] link (0e512140) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306f20)
1: [ce512140] link (0e512180) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce512180] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8240] link (0e4b81b2) element (0e512080)
Element != First TD
0: [ce512040] link (0e512080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306ce0)
1: [ce512080] link (0e5120c0) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce5120c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status
500000
[ce4b8270] link (0e4b81b2) element (0e512140)
Element != First TD
0: [ce512100] link (0e512140) e3 LS Length=7 MaxLen=7 DT0 EndPt=0
Dev=2, PID=2d(SETUP) (buf=01306ce0)
1: [ce512140] link (0e512180) e3 SPD LS Stalled Babble Length=3
MaxLen=3 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0df77680)
2: [ce512180] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)
drivers/usb/core/message.c: error getting string descriptor 0
(error=-75)
#############################EOF######################
Then I listed modules so u can see my enviroment.
Module Size Used by
hid 32704 0
usbmouse 5760 0
md5 4096 1
ipv6 244576 8
uhci_hcd 31112 0
ohci_hcd 29824 0
ehci_hcd 35072 0
ds 14976 4
rtc 12072 0
usbcore 114900 7 hid,usbmouse,uhci_hcd,ohci_hcd,ehci_hcd
ntfs 100884 1
cpufreq_userspace 5924 0
button 6292 0
battery 9736 0
ac 5000 0
thermal 13576 0
processor 14360 1 thermal
toshiba_acpi 5524 0
speedstep_centrino 4740 0
freq_table 4484 1 speedstep_centrino
yenta_socket 17152 1
pcmcia_core 70656 2 ds,yenta_socket
snd_intel8x0 31172 0
snd_ac97_codec 53636 1 snd_intel8x0
snd_mpu401_uart 7424 1 snd_intel8x0
snd_rawmidi 24064 1 snd_mpu401_uart
e100 61188 0
############## EOF ###################
The state of /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test11-bk12 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test11-bk12 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test11-bk12 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=062a ProdID=0000 Rev= 2.04
C:* #Ifs= 1 Cfg#= 0 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test11-bk12 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
##########################EOF################################
I not undersand that info so this is output of usbview:
Unknown Device
Speed: 1.5Mb/s (low)
USB Version: 1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 062a
Product Id: 0000
Revision Number: 2.04
Config Number: 0
Number of Interfaces: 1
Attributes: a0
MaxPower Needed: 100mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: 03(HID )
Sub Class: 1
Protocol: 2
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 4
Interval: 10ms
##################EOF#########################
Then, when I unplug the device on dmesg I get this:
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: config 0 descriptor??
hub 2-0:1.0: port 1, status 100, change 3, 12 Mb/s
usb 2-1: USB disconnect, address 2
usb 2-1: usb_disable_device nuking all URBs
usb 2-1: unregistering interface
Unable to handle kernel NULL pointer dereference at virtual address
00000008
printing eip:
c015966f
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c015966f>] Not tainted
EFLAGS: 00010296
EIP is at __lookup_hash+0x1b/0xd0
eax: cf55be98 ebx: 12fd28db ecx: ffffffff edx: 01b9ec71
esi: c03a1c18 edi: 00000000 ebp: 00000000 esp: cf55be5c
ds: 007b es: 007b ss: 0068
Process khubd (pid: 2554, threadinfo=cf55a000 task=cf9726a0)
Stack: c036a2c0 cf55be8c 00000000 12fd28db c03a1c18 c033b5bc ceb29728
c0159743
cf55be98 00000000 00000000 c017a96c cf55be98 00000000 00000282
c033b5b7
00000005 12fd28db 00000282 ce003694 ceb29600 c017be07 00000000
c033b5b7
Call Trace:
[<c0159743>] lookup_hash+0x1f/0x23
[<c017a96c>] sysfs_get_dentry+0x6a/0x70
[<c017be07>] sysfs_remove_group+0x65/0x6a
[<c023e536>] dpm_sysfs_remove+0x1a/0x20
[<c023dfff>] device_pm_remove+0x26/0x71
[<c023bbd3>] device_del+0x65/0x9b
[<d1952bf0>] usb_disable_device+0xdb/0x116 [usbcore]
[<d194cc85>] usb_disconnect+0x9f/0x12f [usbcore]
[<d194f7a0>] hub_port_connect_change+0x394/0x399 [usbcore]
[<d194fbac>] hub_events+0x407/0x470 [usbcore]
[<d194fc42>] hub_thread+0x2d/0xf7 [usbcore]
[<c0108ffe>] ret_from_fork+0x6/0x14
[<c011a208>] default_wake_function+0x0/0x12
[<d194fc15>] hub_thread+0x0/0xf7 [usbcore]
[<c0107289>] kernel_thread_helper+0x5/0xb
Code: 8b 77 08 89 6c 24 08 c7 44 24 04 01 00 00 00 89 34 24 e8 30
<7>drivers/usb/host/uhci-hcd.c: efe0: suspend_hc
drivers/usb/host/uhci-hcd.c: efe0: wakeup_hc
drivers/usb/host/uhci-hcd.c: efe0: suspend_hc
drivers/usb/host/uhci-hcd.c: efe0: wakeup_hc <------------
drivers/usb/host/uhci-hcd.c: efe0: suspend_hc <------------ this 2
lines are printed forever.
##############################EOF############################
I hope this info will be usefull for u.
El mié, 17-12-2003 a las 01:55, Greg KH escribió:
> On Wed, Dec 17, 2003 at 01:33:48AM +0100, Carlos Jiménez wrote:
> > ok thanx I'll try it, and i'll notify you
> >
> > Excuse my english (I am from spain, and I not practice english too much
> > :)
> >
> > On 2.6.0-alltest (not yet probed with bk) all usb devices works good
> > (usb-storage with an aiptek cam, and usbfloppy).
> >
> > When I plug in that mouse, usbview shows it as an unrecognized device.
>
> What does /proc/bus/usb/devices show with the mouse plugged in? Do you
> have the usb hid driver loaded?
>
> > The device does not work at all, cat /dev/input/mice , cat
> > /dev/input/mouse0 and cat /dev/usbmouse shows anything when I move the
> > usbmouse, (on 2.4.2x kernel device works good, and I was wathcing ascii
> > characters, when I was moving it).
> >
> > Then, when I removed the device, or when i try to unload uhci-hcd (while
> > device is plugged) kernel show that info, and all about usb goes down. I
> > cant unload, load, anything about modules, and I have to use sync before
> > poweroff to power off the system whithout breakin filesystems.
>
> Yeah, there are still some races there. Hopefully the latest -bk tree
> (or test11) will fix a lot of these.
>
> thanks,
>
> greg k-h
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: UHCI-HCD && mosedev on 2.6.0-test11
2003-12-17 0:55 ` Greg KH
2003-12-17 10:18 ` Carlos Jiménez
@ 2003-12-19 12:13 ` Carlos Jiménez
1 sibling, 0 replies; 6+ messages in thread
From: Carlos Jiménez @ 2003-12-19 12:13 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel
More about UHCI && mousedev.
I have compiled 2.6.0 final release, and This compilation was using
EMBEDDED(to get tristate on mousedev) and mousedev as a module.
Without inserting module mousedev uhci-hcd hangs when I remove the
device.
So mousedev module probably is ok.
If u have any code to solve it, and u need probe it email me and I'll
compile it and probe for u.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-12-19 12:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-16 0:55 UHCI-HCD && mosedev on 2.6.0-test11 Carlos Jiménez
2003-12-16 17:46 ` Greg KH
2003-12-17 0:33 ` Carlos Jiménez
2003-12-17 0:55 ` Greg KH
2003-12-17 10:18 ` Carlos Jiménez
2003-12-19 12:13 ` Carlos Jiménez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).