* [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
@ 2004-12-06 11:48 florian
2004-12-06 13:28 ` Alan Cox
2004-12-06 13:29 ` Florian Krammel
0 siblings, 2 replies; 7+ messages in thread
From: florian @ 2004-12-06 11:48 UTC (permalink / raw)
To: Kernel-list
[-- Attachment #1: Type: text/plain, Size: 45284 bytes --]
Distribution: Fedora Core 3
Kernel: upgraded to 2.6.9-1.681_FC3
Hardware:
Mainboard - Unknown (I think it's from Medion)
Graphikcard - Ati Radeon 9100 PRO IGP
Sound: ATI AC'97
Harddisk - 120 GB IDE
DVD: Medion DVD-RW+/-
USB 2.0
USB devices:
Mouse - optical wheel mouse USB - vendor: Elta
Printer - HP deskjet
Scanner - Mustek 600 CU
USB 4 Port Hub (only the mous is connectet with the hub)
Subject: [<02282da7>] (usb_hcd_irq+0x0/0x4b)
Disabling IRQ #5 - USB Devices do not work
Description:
My first problem ist the "USB Legacy Support" (to enable/disable in the
BIOS). If this is enabled the system is going to hang. And there is only
this message "Disabling IRQ #3". I can't start the "Fedora core 3" and
"Fedora Core 1" installation if "Legacy Support" is enabeld. If I
disable this, I can install "Fedora Core 1/3". After the installation I
tryed to enable "Legacy Support" but the same problem takes affect.
In "Fedora Core 2" this problem don't exist but no USB device works. And
after I updated the system ("yum update") the same problem like in FC3
is the result.
Now I'm using FC3, "Legacy Support" is disabeld. But there still exist
some problems. My printer and my scanner won't work. Both devices worked
correctly on my old PC with FC1.
CUPS hangs if I try to start the daemon and XSANE don't find any device.
At boottime some messages like "irq 5: nobody cared! ... please report a
bug...." was displayed.
I have already tryed "acpi=off"
I have build my own kernel 2.6.9 with ACPI on/off and device management
for BIOS and the kernel
My Questions:
How can I enable "USB Legacy Support" without errors?
How can I resolve the problem with the USB devices?
I've found via google some BIOS Bugs for "USB Legacy Support", but this
bug occurs only on Windows XP (I don't found this for Linux). I tried
allready to update my BIOS and now USB is disabled for all devices
(Mouse, Printer, Scanner, USB-FlashMemory)
[florian@orange-bud ~]$ cat /proc/interrupts
CPU0
0: 1405240 XT-PIC timer
1: 1422 XT-PIC i8042
2: 0 XT-PIC cascade
5: 100012 XT-PIC ehci_hcd, ohci_hcd, ohci_hcd
8: 1 XT-PIC rtc
9: 0 XT-PIC acpi
11: 2174 XT-PIC ATI IXP, eth0
12: 83685 XT-PIC i8042
14: 62240 XT-PIC ide0
15: 22 XT-PIC ide1
NMI: 0
ERR: 6
[florian@orange-bud ~]$
this is the output from dmesg:
this is like the message at boottime there stands IRQ 3 in the past and
now (after BIOS update) IRQ 5.
irq 5: nobody cared! (screaming interrupt?)
irq 5: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<02282da7>] (usb_hcd_irq+0x0/0x4b)
Disabling IRQ #5
dmesg before the BIOS was updated:
the current dmesg is at the bottom
Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST
2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 114416
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110320 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 FIC ) @ 0x000f6a00
ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3000
ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3040
ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet
ide_setup: hdc=ide-scsi
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023db000 soft=023da000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2793.878 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 449444k/457664k available (2084k kernel code, 7684k reserved,
651k data, 148k init, 0k highmem)
Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 383k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *12
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:14.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 11 (level, low) -> IRQ 11
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1101309616.763:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 5E743E255A7478EF
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (-127 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Unsupported Ati chipset (device id: 7833)
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<0223aede>] (i8042_interrupt+0x0/0x251)
Disabling IRQ #12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
Probing IDE interface ide1...
hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<0223aede>] (i8042_interrupt+0x0/0x251)
Disabling IRQ #12
input: AT Translated Set 2 keyboard on isa0060/serio0
irq 12: nobody cared! (screaming interrupt?)
irq 12: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<0223aede>] (i8042_interrupt+0x0/0x251)
Disabling IRQ #12
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4bios S5)
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC
Freeing unused kernel memory: 148k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Losing some ticks... checking if CPU frequency changed.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
spurious 8259A interrupt: IRQ7.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
inserting floppy driver for 2.6.9-1.681_FC3
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: irq 3, pci mem 1e81c000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: irq 3, pci mem 1e830000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: irq 3, pci mem 1e864000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ohci_hcd 0000:00:13.0: wakeup
ohci_hcd 0000:00:13.1: wakeup
usb 2-1: new full speed USB device using address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 3-1: new full speed USB device using address 2
usb 3-2: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0
alt 0 proto 2 vid 0x03F0 pid 0x7304
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 2-1.1: new low speed USB device using address 3
input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on
usb-0000:00:13.0-1.1
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0236dc20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on hda5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Losing some ticks... checking if CPU frequency changed.
Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1
SCSI subsystem initialized
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing too many ticks!
TSC cannot be used as a timesource.
Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
eth0: no IPv6 routers present
i2c /dev entries driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
application sox uses obsolete OSS audio interface
---------------------------------------------------------------------------------
dmesg before BIOS update: in modprobe.conf ohci_hcd is disabled - IRQ 12
(PS/2 Mouse) won't be disabled
Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST
2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 114416
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110320 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 FIC ) @ 0x000f6870
ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3000
ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3040
ACPI: MADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef6380
ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet
ide_setup: hdc=ide-scsi
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023db000 soft=023da000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2794.523 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 449444k/457664k available (2084k kernel code, 7684k reserved,
651k data, 148k init, 0k highmem)
Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 383k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1101687518.695:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 5E743E255A7478EF
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (-127 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Unsupported Ati chipset (device id: 7833)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
Probing IDE interface ide1...
hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4bios S5)
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC UAR1 UAR2 PS2M PS2K
Freeing unused kernel memory: 148k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Losing some ticks... checking if CPU frequency changed.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Losing some ticks... checking if CPU frequency changed.
spurious 8259A interrupt: IRQ7.
inserting floppy driver for 2.6.9-1.681_FC3
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001)
ehci_hcd 0000:00:13.2: continuing after BIOS bug...
irq 5: nobody cared! (screaming interrupt?)
irq 5: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<02282da7>] (usb_hcd_irq+0x0/0x4b)
Disabling IRQ #5
ehci_hcd 0000:00:13.2: irq 5, pci mem 1e81c000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: irq 5, pci mem 1e830000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: irq 5, pci mem 1e864000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Losing some ticks... checking if CPU frequency changed.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0236dc20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on hda5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Losing some ticks... checking if CPU frequency changed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1
SCSI subsystem initialized
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
Losing some ticks... checking if CPU frequency changed.
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing too many ticks!
TSC cannot be used as a timesource.
Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
i2c /dev entries driver
eth0: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
application sox uses obsolete OSS audio interface
application xine uses obsolete OSS audio interface
[root@orange-bud ~]#
------------------------------------------------------------------------------------
current dmesg:
[florian@orange-bud ~]$ dmesg
Linux version 2.6.9-1.681_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Nov 18 15:10:10 EST
2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 114416
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110320 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 FIC ) @ 0x000f6870
ACPI: RSDT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3000
ACPI: FADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef3040
ACPI: MADT (v001 FIC P4MRS350 0x42302e31 AWRD 0x00000000) @
0x1bef6380
ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb quiet
ide_setup: hdc=ide-scsi
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023db000 soft=023da000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2794.154 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 449444k/457664k available (2084k kernel code, 7684k reserved,
651k data, 148k init, 0k highmem)
Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 383k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1102076498.583:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 5E743E255A7478EF
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Thermal Zone [THRM] (-127 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Unsupported Ati chipset (device id: 7833)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
Probing IDE interface ide1...
hdc: MEDION DVD RW DVR-MCC, ATAPI CD/DVD-ROM drive
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4bios S5)
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AUDO MODM P2P MAC UAR1 UAR2 PS2M PS2K
Freeing unused kernel memory: 148k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing too many ticks!
TSC cannot be used as a timesource.
Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1482218
ext3_orphan_cleanup: deleting unreferenced inode 1368622
ext3_orphan_cleanup: deleting unreferenced inode 1636111
ext3_orphan_cleanup: deleting unreferenced inode 16939
ext3_orphan_cleanup: deleting unreferenced inode 1370088
ext3_orphan_cleanup: deleting unreferenced inode 1744627
ext3_orphan_cleanup: deleting unreferenced inode 1636096
ext3_orphan_cleanup: deleting unreferenced inode 1370076
ext3_orphan_cleanup: deleting unreferenced inode 1641024
ext3_orphan_cleanup: deleting unreferenced inode 1370025
ext3_orphan_cleanup: deleting unreferenced inode 1370022
ext3_orphan_cleanup: deleting unreferenced inode 1368810
EXT3-fs: hda5: 12 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.9-1.681_FC3
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xd000, 00:40:ca:85:f7:15, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001)
ehci_hcd 0000:00:13.2: continuing after BIOS bug...
irq 5: nobody cared! (screaming interrupt?)
irq 5: Please try booting with acpi=off and report a bug
Stack pointer is garbage, not printing trace
handlers:
[<02282da7>] (usb_hcd_irq+0x0/0x4b)
Disabling IRQ #5
ehci_hcd 0000:00:13.2: irq 5, pci mem 1e81c000
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: irq 5, pci mem 1e830000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: irq 5, pci mem 1e864000
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0236dc20(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
EXT3 FS on hda5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020088k swap on /dev/hda9. Priority:-1 extents:1
SCSI subsystem initialized
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MEDION Model: DVD RW DVR-MCC Rev: 1.08
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x7 to 0xb, date = 05122004
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
eth0: no IPv6 routers present
spurious 8259A interrupt: IRQ7.
i2c /dev entries driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
application sox uses obsolete OSS audio interface
[florian@orange-bud ~]$
--
florian <florian_kr@gmx.de>
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
2004-12-06 11:48 [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work florian
@ 2004-12-06 13:28 ` Alan Cox
[not found] ` <1102450409.7531.10.camel@orange-bud>
2004-12-06 13:29 ` Florian Krammel
1 sibling, 1 reply; 7+ messages in thread
From: Alan Cox @ 2004-12-06 13:28 UTC (permalink / raw)
To: florian; +Cc: Linux Kernel Mailing List
On Llu, 2004-12-06 at 11:48, florian wrote:
> How can I enable "USB Legacy Support" without errors?
> How can I resolve the problem with the USB devices?
What chipset is the motherboard ?
> I've found via google some BIOS Bugs for "USB Legacy Support", but this
> bug occurs only on Windows XP (I don't found this for Linux). I tried
> allready to update my BIOS and now USB is disabled for all devices
> (Mouse, Printer, Scanner, USB-FlashMemory)
Windows XP and Linux may well hit the same problems with USB.
> irq 5: nobody cared! (screaming interrupt?)
> irq 5: Please try booting with acpi=off and report a bug
> Stack pointer is garbage, not printing trace
> handlers:
> [<02282da7>] (usb_hcd_irq+0x0/0x4b)
> Disabling IRQ #5
The latest FC3 kernel should have new enough -ac patches to run on boxes
with
totally broken BIOS IRQ routing. Try the boot option "irqpoll"
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001)
> ehci_hcd 0000:00:13.2: continuing after BIOS bug...
> irq 5: nobody cared! (screaming interrupt?)
> irq 5: Please try booting with acpi=off and report a bug
> Stack pointer is garbage, not printing trace
This is all interesting seen as one. It implies the BIOS handover failed
and
then we get an IRQ mess.
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> ehci_hcd 0000:00:13.2: BIOS handoff failed (160, 1010001)
> ehci_hcd 0000:00:13.2: continuing after BIOS bug...
> irq 5: nobody cared! (screaming interrupt?)
> irq 5: Please try booting with acpi=off and report a bug
> Stack pointer is garbage, not printing trace
Ditto, and this is quite possibly the root cause. That suggests the BIOS
handover code for EHCI is insufficient for some cases (and it appears to
be looking at the code quickly - it should register IRQ 5 before doing a
handover which it does but it probably needs to just ack and mask IRQ 5
during the handover. It could be another device breaking IRQ5 however)
What occurs if you build a kernel with EHCI disabled, ditto what occurs
if you boot with init=/bin/sh and then load ohci before ehci ?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
2004-12-06 11:48 [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work florian
2004-12-06 13:28 ` Alan Cox
@ 2004-12-06 13:29 ` Florian Krammel
1 sibling, 0 replies; 7+ messages in thread
From: Florian Krammel @ 2004-12-06 13:29 UTC (permalink / raw)
To: Kernel-list
[-- Attachment #1: Type: text/plain, Size: 65 bytes --]
booting with knoppix (kernel 2.4.27) works without any problems
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
[not found] ` <1102450409.7531.10.camel@orange-bud>
@ 2004-12-07 20:52 ` Florian Krammel
2004-12-08 9:15 ` Florian Krammel
2004-12-08 11:03 ` Alan Cox
0 siblings, 2 replies; 7+ messages in thread
From: Florian Krammel @ 2004-12-07 20:52 UTC (permalink / raw)
To: Kernel-list
[-- Attachment #1: Type: text/plain, Size: 1204 bytes --]
> > What chipset is the motherboard ?
I don't know, I don't have the motherboard manuals.
How can I get this information via software?
> > Windows XP and Linux may well hit the same problems with USB.
really? ;)
> > The latest FC3 kernel should have new enough -ac patches to run on boxes
> > with
> > totally broken BIOS IRQ routing. Try the boot option "irqpoll"
this is great, thank you! I get the error message but everything works
> > Ditto, and this is quite possibly the root cause. That suggests the BIOS
> > handover code for EHCI is insufficient for some cases (and it appears to
> > be looking at the code quickly - it should register IRQ 5 before doing a
> > handover which it does but it probably needs to just ack and mask IRQ 5
> > during the handover. It could be another device breaking IRQ5 however)
> >
> >
> > What occurs if you build a kernel with EHCI disabled, ditto what occurs
> > if you boot with init=/bin/sh and then load ohci before ehci ?
I don't tested this because "irqpoll" solve my problem. Are you
interested in the result? I can try it.
thank you for help...
mfg
florian
--
Florian Krammel <florian_kr@gmx.de>
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
2004-12-07 20:52 ` Florian Krammel
@ 2004-12-08 9:15 ` Florian Krammel
2004-12-08 11:03 ` Alan Cox
1 sibling, 0 replies; 7+ messages in thread
From: Florian Krammel @ 2004-12-08 9:15 UTC (permalink / raw)
To: Kernel-list
[-- Attachment #1: Type: text/plain, Size: 1152 bytes --]
ok I think "lspci" tell me the Chipset?
everything is from ATI
[root@orange-bud dev]# lspci
00:00.0 Host bridge: ATI Technologies Inc: Unknown device 7833
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 7838
00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4367 (rev
01)
00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4368 (rev
01)
00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4365 (rev
01)
00:14.0 SMBus: ATI Technologies Inc: Unknown device 4363 (rev 03)
00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4369 (rev
01)
00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 436c (rev 01)
00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4362 (rev 01)
00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown
device 4361(rev 03)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100 PRO
IGP
02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:07.0 Communication controller: Agere Systems (former Lucent
Microelectronics) V.92 56K WinModem (rev 03)
[root@orange-bud dev]#
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
2004-12-07 20:52 ` Florian Krammel
2004-12-08 9:15 ` Florian Krammel
@ 2004-12-08 11:03 ` Alan Cox
2004-12-12 13:38 ` Florian Krammel
1 sibling, 1 reply; 7+ messages in thread
From: Alan Cox @ 2004-12-08 11:03 UTC (permalink / raw)
To: Florian Krammel; +Cc: Linux Kernel Mailing List
On Maw, 2004-12-07 at 20:52, Florian Krammel wrote:
> > > Ditto, and this is quite possibly the root cause. That suggests the BIOS
> > > handover code for EHCI is insufficient for some cases (and it appears to
> > > be looking at the code quickly - it should register IRQ 5 before doing a
> > > handover which it does but it probably needs to just ack and mask IRQ 5
> > > during the handover. It could be another device breaking IRQ5 however)
> > >
> > >
> > > What occurs if you build a kernel with EHCI disabled, ditto what occurs
> > > if you boot with init=/bin/sh and then load ohci before ehci ?
>
> I don't tested this because "irqpoll" solve my problem. Are you
> interested in the result? I can try it.
I would be very interested to know if this makes a difference yes
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work
2004-12-08 11:03 ` Alan Cox
@ 2004-12-12 13:38 ` Florian Krammel
0 siblings, 0 replies; 7+ messages in thread
From: Florian Krammel @ 2004-12-12 13:38 UTC (permalink / raw)
To: Alan Cox, Kernel-list
[-- Attachment #1: Type: text/plain, Size: 990 bytes --]
Am Mittwoch, den 08.12.2004, 11:03 +0000 schrieb Alan Cox:
> On Maw, 2004-12-07 at 20:52, Florian Krammel wrote:
> > > > Ditto, and this is quite possibly the root cause. That suggests the BIOS
> > > > handover code for EHCI is insufficient for some cases (and it appears to
> > > > be looking at the code quickly - it should register IRQ 5 before doing a
> > > > handover which it does but it probably needs to just ack and mask IRQ 5
> > > > during the handover. It could be another device breaking IRQ5 however)
> > > >
> > > >
> > > > What occurs if you build a kernel with EHCI disabled, ditto what occurs
> > > > if you boot with init=/bin/sh and then load ohci before ehci ?
> >
> > I don't tested this because "irqpoll" solve my problem. Are you
> > interested in the result? I can try it.
>
> I would be very interested to know if this makes a difference yes
today I've tested this and there is no difference...
maybe it is the unsopported ATI chip?
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-12-12 13:39 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-06 11:48 [<02282da7>] (usb_hcd_irq+0x0/0x4b) Disabling IRQ #5 - USB Devices do not work florian
2004-12-06 13:28 ` Alan Cox
[not found] ` <1102450409.7531.10.camel@orange-bud>
2004-12-07 20:52 ` Florian Krammel
2004-12-08 9:15 ` Florian Krammel
2004-12-08 11:03 ` Alan Cox
2004-12-12 13:38 ` Florian Krammel
2004-12-06 13:29 ` Florian Krammel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).