[git patch review 2/7] IB/mthca: correct log2 calculation

[git patch review 2/7] IB/mthca: correct log2 calculation

[Roland Dreier]

Fix thinko in rd_atomic calculation: ffs(x) - 1 does not find the next
power of 2 -- it should be fls(x - 1).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_qp.c |   17 ++++++-----------
 1 files changed, 6 insertions(+), 11 deletions(-)

6aa2e4e8063114bd7cea8616dd5848d3c64b4c36
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index c5c3d0e..84056a8 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -728,9 +728,9 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 	}
 
 	if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC) {
-		qp_context->params1 |= cpu_to_be32(min(attr->max_rd_atomic ?
-						       ffs(attr->max_rd_atomic) - 1 : 0,
-						       7) << 21);
+		if (attr->max_rd_atomic)
+			qp_context->params1 |=
+				cpu_to_be32(fls(attr->max_rd_atomic - 1) << 21);
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_SRA_MAX);
 	}
 
@@ -769,8 +769,6 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 	}
 
 	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
-		u8 rra_max;
-
 		if (qp->resp_depth && !attr->max_dest_rd_atomic) {
 			/*
 			 * Lowering our responder resources to zero.
@@ -798,13 +796,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 								MTHCA_QP_OPTPAR_RAE);
 		}
 
-		for (rra_max = 0;
-		     1 << rra_max < attr->max_dest_rd_atomic &&
-			     rra_max < dev->qp_table.rdb_shift;
-		     ++rra_max)
-			; /* nothing */
+		if (attr->max_dest_rd_atomic)
+			qp_context->params2 |=
+				cpu_to_be32(fls(attr->max_dest_rd_atomic - 1) << 21);
 
-		qp_context->params2      |= cpu_to_be32(rra_max << 21);
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRA_MAX);
 
 		qp->resp_depth = attr->max_dest_rd_atomic;
-- 
0.99.9n

[git patch review 3/7] IB/mthca: don't change driver's copy of attributes if modify QP fails

[Roland Dreier]

Only change the driver's copy of the QP attributes in modify QP after
checking the modify QP command completed successfully.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_qp.c |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)

44b5b0303327cfb23f135b95b2fe5436c81ed27c
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 84056a8..3543299 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -764,8 +764,6 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
 							MTHCA_QP_OPTPAR_RRE |
 							MTHCA_QP_OPTPAR_RAE);
-
-		qp->atomic_rd_en = attr->qp_access_flags;
 	}
 
 	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
@@ -801,8 +799,6 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 				cpu_to_be32(fls(attr->max_dest_rd_atomic - 1) << 21);
 
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRA_MAX);
-
-		qp->resp_depth = attr->max_dest_rd_atomic;
 	}
 
 	qp_context->params2 |= cpu_to_be32(MTHCA_QP_BIT_RSC);
@@ -844,8 +840,13 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 		err = -EINVAL;
 	}
 
-	if (!err)
+	if (!err) {
 		qp->state = new_state;
+		if (attr_mask & IB_QP_ACCESS_FLAGS)
+			qp->atomic_rd_en = attr->qp_access_flags;
+		if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+			qp->resp_depth = attr->max_dest_rd_atomic;
+	}
 
 	mthca_free_mailbox(dev, mailbox);
 
-- 
0.99.9n

[git patch review 5/7] IB/mthca: Fix SRQ cleanup during QP destroy

[Roland Dreier]

When cleaning up a CQ for a QP attached to SRQ, need to free an SRQ
WQE only if the CQE is a receive completion.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_cq.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

576d2e4e40315e8140c04be99cd057720d8a3817
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 4a8adce..fcef8dc 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -253,6 +253,15 @@ void mthca_cq_event(struct mthca_dev *de
 		wake_up(&cq->wait);
 }
 
+static inline int is_recv_cqe(struct mthca_cqe *cqe)
+{
+	if ((cqe->opcode & MTHCA_ERROR_CQE_OPCODE_MASK) ==
+	    MTHCA_ERROR_CQE_OPCODE_MASK)
+		return !(cqe->opcode & 0x01);
+	else
+		return !(cqe->is_send & 0x80);
+}
+
 void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
 		    struct mthca_srq *srq)
 {
@@ -296,7 +305,7 @@ void mthca_cq_clean(struct mthca_dev *de
 	while ((int) --prod_index - (int) cq->cons_index >= 0) {
 		cqe = get_cqe(cq, prod_index & cq->ibcq.cqe);
 		if (cqe->my_qpn == cpu_to_be32(qpn)) {
-			if (srq)
+			if (srq && is_recv_cqe(cqe))
 				mthca_free_srq_wqe(srq, be32_to_cpu(cqe->wqe));
 			++nfreed;
 		} else if (nfreed)
-- 
0.99.9n

[git patch review 1/7] IB/mthca: check RDMA limits

[Roland Dreier]

Add limit checking on rd_atomic and dest_rd_atomic attributes:
especially for max_dest_rd_atomic, a value that is larger than HCA
capability can cause RDB overflow and corruption of another QP.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_qp.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

94361cf74a6fca1973d2fed5338d5fb4bcd902fa
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 7450550..c5c3d0e 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -591,6 +591,20 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 		return -EINVAL;
 	}
 
+	if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC &&
+	    attr->max_rd_atomic > dev->limits.max_qp_init_rdma) {
+		mthca_dbg(dev, "Max rdma_atomic as initiator %u too large (max is %d)\n",
+			  attr->max_rd_atomic, dev->limits.max_qp_init_rdma);
+		return -EINVAL;
+	}
+
+	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC &&
+	    attr->max_dest_rd_atomic > 1 << dev->qp_table.rdb_shift) {
+		mthca_dbg(dev, "Max rdma_atomic as responder %u too large (max %d)\n",
+			  attr->max_dest_rd_atomic, 1 << dev->qp_table.rdb_shift);
+		return -EINVAL;
+	}
+
 	mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
 	if (IS_ERR(mailbox))
 		return PTR_ERR(mailbox);
-- 
0.99.9n

[git patch review 4/7] IB/mthca: Fix thinko in mthca_table_find()

[Roland Dreier]

break only escapes from the innermost loop, and we want to escape both
loops and return an answer.  Noticed by Ishai Rabinovitch.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_memfree.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

6c7d2a75b512c64c910b69adf32dbaddb461910b
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 5798ed0..9fb985a 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -233,7 +233,7 @@ void *mthca_table_find(struct mthca_icm_
 		for (i = 0; i < chunk->npages; ++i) {
 			if (chunk->mem[i].length >= offset) {
 				page = chunk->mem[i].page;
-				break;
+				goto out;
 			}
 			offset -= chunk->mem[i].length;
 		}
-- 
0.99.9n

[git patch review 6/7] IB/mthca: Fix IB_QP_ACCESS_FLAGS handling.

[Roland Dreier]

This patch corrects some corner cases in managing the RAE/RRE bits in
the mthca qp context.  These bits need to be zero if the user requests
max_dest_rd_atomic of zero.  The bits need to be restored to the value
implied by the qp access flags attribute in a previous (or the
current) modify-qp command if the dest_rd_atomic variable is changed
to non-zero.

In the current implementation, the following scenario will not work:
RESET-to-INIT 	set QP access flags to all disabled (zeroes)
INIT-to-RTR     set max_dest_rd_atomic=10, AND
		set qp_access_flags = IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_ATOMIC

The current code will incorrectly take the access-flags value set in
the RESET-to-INIT transition.

We can simplify, and correct, this IB_QP_ACCESS_FLAGS handling: it is
always safe to set qp access flags in the firmware command if either
of IB_QP_MAX_DEST_RD_ATOMIC or IB_QP_ACCESS_FLAGS is set, so let's
just set it to the correct value, always.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_qp.c |   87 ++++++++++++++------------------
 1 files changed, 37 insertions(+), 50 deletions(-)

d1646f86a2a05a956adbb163c81a81bd621f055e
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 3543299..e826c9f 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -522,6 +522,36 @@ static void init_port(struct mthca_dev *
 		mthca_warn(dev, "INIT_IB returned status %02x.\n", status);
 }
 
+static __be32 get_hw_access_flags(struct mthca_qp *qp, struct ib_qp_attr *attr,
+				  int attr_mask)
+{
+	u8 dest_rd_atomic;
+	u32 access_flags;
+	u32 hw_access_flags = 0;
+
+	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+		dest_rd_atomic = attr->max_dest_rd_atomic;
+	else
+		dest_rd_atomic = qp->resp_depth;
+
+	if (attr_mask & IB_QP_ACCESS_FLAGS)
+		access_flags = attr->qp_access_flags;
+	else
+		access_flags = qp->atomic_rd_en;
+
+	if (!dest_rd_atomic)
+		access_flags &= IB_ACCESS_REMOTE_WRITE;
+
+	if (access_flags & IB_ACCESS_REMOTE_READ)
+		hw_access_flags |= MTHCA_QP_BIT_RRE;
+	if (access_flags & IB_ACCESS_REMOTE_ATOMIC)
+		hw_access_flags |= MTHCA_QP_BIT_RAE;
+	if (access_flags & IB_ACCESS_REMOTE_WRITE)
+		hw_access_flags |= MTHCA_QP_BIT_RWE;
+
+	return cpu_to_be32(hw_access_flags);
+}
+
 int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 {
 	struct mthca_dev *dev = to_mdev(ibqp->device);
@@ -743,57 +773,7 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 		qp_context->snd_db_index   = cpu_to_be32(qp->sq.db_index);
 	}
 
-	if (attr_mask & IB_QP_ACCESS_FLAGS) {
-		qp_context->params2 |=
-			cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ?
-				    MTHCA_QP_BIT_RWE : 0);
-
-		/*
-		 * Only enable RDMA reads and atomics if we have
-		 * responder resources set to a non-zero value.
-		 */
-		if (qp->resp_depth) {
-			qp_context->params2 |=
-				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_READ ?
-					    MTHCA_QP_BIT_RRE : 0);
-			qp_context->params2 |=
-				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC ?
-					    MTHCA_QP_BIT_RAE : 0);
-		}
-
-		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
-							MTHCA_QP_OPTPAR_RRE |
-							MTHCA_QP_OPTPAR_RAE);
-	}
-
 	if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
-		if (qp->resp_depth && !attr->max_dest_rd_atomic) {
-			/*
-			 * Lowering our responder resources to zero.
-			 * Turn off reads RDMA and atomics as responder.
-			 * (RRE/RAE in params2 already zero)
-			 */
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
-								MTHCA_QP_OPTPAR_RAE);
-		}
-
-		if (!qp->resp_depth && attr->max_dest_rd_atomic) {
-			/*
-			 * Increasing our responder resources from
-			 * zero.  Turn on RDMA reads and atomics as
-			 * appropriate.
-			 */
-			qp_context->params2 |=
-				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_READ ?
-					    MTHCA_QP_BIT_RRE : 0);
-			qp_context->params2 |=
-				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_ATOMIC ?
-					    MTHCA_QP_BIT_RAE : 0);
-
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
-								MTHCA_QP_OPTPAR_RAE);
-		}
-
 		if (attr->max_dest_rd_atomic)
 			qp_context->params2 |=
 				cpu_to_be32(fls(attr->max_dest_rd_atomic - 1) << 21);
@@ -801,6 +781,13 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRA_MAX);
 	}
 
+	if (attr_mask & (IB_QP_ACCESS_FLAGS | IB_QP_MAX_DEST_RD_ATOMIC)) {
+		qp_context->params2      |= get_hw_access_flags(qp, attr, attr_mask);
+		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
+							MTHCA_QP_OPTPAR_RRE |
+							MTHCA_QP_OPTPAR_RAE);
+	}
+
 	qp_context->params2 |= cpu_to_be32(MTHCA_QP_BIT_RSC);
 
 	if (ibqp->srq)
-- 
0.99.9n

[git patch review 7/7] IB/mthca: Fix corner cases in max_rd_atomic value handling in modify QP

[Roland Dreier]

sae and sre bits should only be set when setting sra_max.  Further, in
the old code, if the caller specifies max_rd_atomic = 0, the sre and
sae bits are still set, with the result that the QP ends up with
max_rd_atomic = 1 in effect.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/infiniband/hw/mthca/mthca_qp.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

c4342d8a4d95e18b957b898dbf5bfce28fca2780
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index e826c9f..d786ef4 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -747,9 +747,7 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 	qp_context->wqe_lkey   = cpu_to_be32(qp->mr.ibmr.lkey);
 	qp_context->params1    = cpu_to_be32((MTHCA_ACK_REQ_FREQ << 28) |
 					     (MTHCA_FLIGHT_LIMIT << 24) |
-					     MTHCA_QP_BIT_SRE           |
-					     MTHCA_QP_BIT_SWE           |
-					     MTHCA_QP_BIT_SAE);
+					     MTHCA_QP_BIT_SWE);
 	if (qp->sq_policy == IB_SIGNAL_ALL_WR)
 		qp_context->params1 |= cpu_to_be32(MTHCA_QP_BIT_SSC);
 	if (attr_mask & IB_QP_RETRY_CNT) {
@@ -758,9 +756,13 @@ int mthca_modify_qp(struct ib_qp *ibqp, 
 	}
 
 	if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC) {
-		if (attr->max_rd_atomic)
+		if (attr->max_rd_atomic) {
+			qp_context->params1 |=
+				cpu_to_be32(MTHCA_QP_BIT_SRE |
+					    MTHCA_QP_BIT_SAE);
 			qp_context->params1 |=
 				cpu_to_be32(fls(attr->max_rd_atomic - 1) << 21);
+		}
 		qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_SRA_MAX);
 	}
 
-- 
0.99.9n

Re: [git patch review 2/7] IB/mthca: correct log2 calculation

[Andrew Morton]

Roland Dreier <rolandd@cisco.com> wrote:
>
> Fix thinko in rd_atomic calculation: ffs(x) - 1 does not find the next
> power of 2 -- it should be fls(x - 1).

Please use round_up_pow_of_two().

Re: [git patch review 2/7] IB/mthca: correct log2 calculation

[Michael S. Tsirkin]

Quoting r. Andrew Morton <akpm@osdl.org>:
> Subject: Re: [git patch review 2/7] IB/mthca: correct log2 calculation
> 
> Roland Dreier <rolandd@cisco.com> wrote:
> >
> > Fix thinko in rd_atomic calculation: ffs(x) - 1 does not find the next
> > power of 2 -- it should be fls(x - 1).
> 
> Please use round_up_pow_of_two().

Yes, but we want the bit number. roundup_pow_of_two does a shift.

-- 
MST