* 2.6.14-rt15: cannot build with !PREEMPT_RT
@ 2005-11-26 6:52 Lee Revell
2005-11-26 12:23 ` Ingo Molnar
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-26 6:52 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel
I get tons of these errors:
CC arch/i386/kernel/i386_ksyms.o
In file included from include/linux/spinlock.h:97,
from include/linux/capability.h:45,
from include/linux/sched.h:7,
from include/linux/module.h:10,
from arch/i386/kernel/i386_ksyms.c:2:
include/linux/rt_lock.h:386: warning: 'struct semaphore' declared inside
parameter list
include/linux/rt_lock.h:386: warning: its scope is only this definition
or declaration, which is probably not what you want
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-26 6:52 2.6.14-rt15: cannot build with !PREEMPT_RT Lee Revell
@ 2005-11-26 12:23 ` Ingo Molnar
2005-11-26 19:05 ` Lee Revell
0 siblings, 1 reply; 33+ messages in thread
From: Ingo Molnar @ 2005-11-26 12:23 UTC (permalink / raw)
To: Lee Revell; +Cc: linux-kernel, david singleton
* Lee Revell <rlrevell@joe-job.com> wrote:
> I get tons of these errors:
>
> CC arch/i386/kernel/i386_ksyms.o
> In file included from include/linux/spinlock.h:97,
> from include/linux/capability.h:45,
> from include/linux/sched.h:7,
> from include/linux/module.h:10,
> from arch/i386/kernel/i386_ksyms.c:2:
> include/linux/rt_lock.h:386: warning: 'struct semaphore' declared inside
> parameter list
> include/linux/rt_lock.h:386: warning: its scope is only this definition
> or declaration, which is probably not what you want
could you try -rt16, does it work better?
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-26 12:23 ` Ingo Molnar
@ 2005-11-26 19:05 ` Lee Revell
2005-11-26 19:46 ` Thomas Gleixner
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-26 19:05 UTC (permalink / raw)
To: Ingo Molnar; +Cc: linux-kernel, david singleton
On Sat, 2005-11-26 at 13:23 +0100, Ingo Molnar wrote:
> * Lee Revell <rlrevell@joe-job.com> wrote:
>
> > I get tons of these errors:
> >
> > CC arch/i386/kernel/i386_ksyms.o
> > In file included from include/linux/spinlock.h:97,
> > from include/linux/capability.h:45,
> > from include/linux/sched.h:7,
> > from include/linux/module.h:10,
> > from arch/i386/kernel/i386_ksyms.c:2:
> > include/linux/rt_lock.h:386: warning: 'struct semaphore' declared inside
> > parameter list
> > include/linux/rt_lock.h:386: warning: its scope is only this definition
> > or declaration, which is probably not what you want
>
> could you try -rt16, does it work better?
>
-rt19 seems to work except that asm/io_apic.h fails to include
asm/apicdef.h so MAX_IO_APICS is undefined.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-26 19:05 ` Lee Revell
@ 2005-11-26 19:46 ` Thomas Gleixner
2005-11-27 12:30 ` Ingo Molnar
0 siblings, 1 reply; 33+ messages in thread
From: Thomas Gleixner @ 2005-11-26 19:46 UTC (permalink / raw)
To: Lee Revell; +Cc: Ingo Molnar, linux-kernel, david singleton
On Sat, 2005-11-26 at 14:05 -0500, Lee Revell wrote:
> -rt19 seems to work except that asm/io_apic.h fails to include
> asm/apicdef.h so MAX_IO_APICS is undefined.
The patch below fixes the Makefile x86_64 clutter and the io_apic
compile problem
tglx
Index: linux-2.6.14-rt/Makefile
===================================================================
--- linux-2.6.14-rt.orig/Makefile
+++ linux-2.6.14-rt/Makefile
@@ -189,8 +189,8 @@ SUBARCH := $(shell uname -m | sed -e s/i
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-ARCH = x86_64
-CROSS_COMPILE = x86_64-linux-
+ARCH ?= $(SUBARCH)
+CROSS_COMPILE ?=
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
Index: linux-2.6.14-rt/arch/i386/kernel/i8253.c
===================================================================
--- linux-2.6.14-rt.orig/arch/i386/kernel/i8253.c
+++ linux-2.6.14-rt/arch/i386/kernel/i8253.c
@@ -10,10 +10,10 @@
#include <linux/init.h>
#include <linux/mca.h>
+#include <asm/smp.h>
#include <asm/io_apic.h>
#include <asm/delay.h>
#include <asm/i8253.h>
-#include <asm/smp.h>
#include <asm/io.h>
#include "io_ports.h"
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-26 19:46 ` Thomas Gleixner
@ 2005-11-27 12:30 ` Ingo Molnar
2005-11-27 19:57 ` Lee Revell
2005-11-28 1:27 ` Lee Revell
0 siblings, 2 replies; 33+ messages in thread
From: Ingo Molnar @ 2005-11-27 12:30 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: Lee Revell, linux-kernel, david singleton
* Thomas Gleixner <tglx@linutronix.de> wrote:
> On Sat, 2005-11-26 at 14:05 -0500, Lee Revell wrote:
>
> > -rt19 seems to work except that asm/io_apic.h fails to include
> > asm/apicdef.h so MAX_IO_APICS is undefined.
>
> The patch below fixes the Makefile x86_64 clutter and the io_apic
> compile problem
thanks, applied.
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-27 12:30 ` Ingo Molnar
@ 2005-11-27 19:57 ` Lee Revell
2005-11-28 11:44 ` Ingo Molnar
2005-11-28 1:27 ` Lee Revell
1 sibling, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-27 19:57 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Sun, 2005-11-27 at 13:30 +0100, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > On Sat, 2005-11-26 at 14:05 -0500, Lee Revell wrote:
> >
> > > -rt19 seems to work except that asm/io_apic.h fails to include
> > > asm/apicdef.h so MAX_IO_APICS is undefined.
> >
> > The patch below fixes the Makefile x86_64 clutter and the io_apic
> > compile problem
>
> thanks, applied.
-rt19 still does not boot for me with PREEMPT_DESKTOP and the latency
debugging options enabled (same .config I sent previously). I get
endless screenfuls of "=============" on boot. grep shows that these
most likely come from kernel/rt.c.
rlrevell@mindpipe:~$ grep -rI "=====================" linux-2.6.14-rt19/kernel/
linux-2.6.14-rt19/kernel/rt.c: printk("=============================================\n\n");
linux-2.6.14-rt19/kernel/rt.c: printk("\n==========================================\n");
linux-2.6.14-rt19/kernel/rt.c: printk("\n===========================================\n");
linux-2.6.14-rt19/kernel/rt.c: printk("\n============================================\n");
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-27 12:30 ` Ingo Molnar
2005-11-27 19:57 ` Lee Revell
@ 2005-11-28 1:27 ` Lee Revell
2005-11-28 11:48 ` Ingo Molnar
1 sibling, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-28 1:27 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Sun, 2005-11-27 at 13:30 +0100, Ingo Molnar wrote:
> * Thomas Gleixner <tglx@linutronix.de> wrote:
>
> > On Sat, 2005-11-26 at 14:05 -0500, Lee Revell wrote:
> >
> > > -rt19 seems to work except that asm/io_apic.h fails to include
> > > asm/apicdef.h so MAX_IO_APICS is undefined.
> >
> > The patch below fixes the Makefile x86_64 clutter and the io_apic
> > compile problem
>
> thanks, applied.
>
-rt20 BUGs and dies on boot with an assertion at line 1931 of
fs/jbd/transaction.c:
1924 void __journal_file_buffer(struct journal_head *jh,
1925 transaction_t *transaction, int jlist)
1926 {
1927 struct journal_head **list = NULL;
1928 int was_dirty = 0;
1929 struct buffer_head *bh = jh2bh(jh);
1930
1931 J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh));
1932 assert_spin_locked(&transaction->t_journal->j_list_lock);
1933
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-27 19:57 ` Lee Revell
@ 2005-11-28 11:44 ` Ingo Molnar
0 siblings, 0 replies; 33+ messages in thread
From: Ingo Molnar @ 2005-11-28 11:44 UTC (permalink / raw)
To: Lee Revell; +Cc: Thomas Gleixner, linux-kernel, david singleton
* Lee Revell <rlrevell@joe-job.com> wrote:
> -rt19 still does not boot for me with PREEMPT_DESKTOP and the latency
> debugging options enabled (same .config I sent previously). I get
> endless screenfuls of "=============" on boot. grep shows that these
> most likely come from kernel/rt.c.
yeah - i can reproduce it with your .config. It goes away if i go from
PREEMPT_DESKTOP to PREEMPT_RT. Investigating.
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 1:27 ` Lee Revell
@ 2005-11-28 11:48 ` Ingo Molnar
2005-11-28 14:56 ` Lee Revell
0 siblings, 1 reply; 33+ messages in thread
From: Ingo Molnar @ 2005-11-28 11:48 UTC (permalink / raw)
To: Lee Revell; +Cc: Thomas Gleixner, linux-kernel, david singleton
which was the last -rt kernel that worked fine for you in
PREEMPT_DESKTOP mode?
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 11:48 ` Ingo Molnar
@ 2005-11-28 14:56 ` Lee Revell
2005-11-28 16:00 ` Ingo Molnar
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-28 14:56 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Mon, 2005-11-28 at 12:48 +0100, Ingo Molnar wrote:
> which was the last -rt kernel that worked fine for you in
> PREEMPT_DESKTOP mode?
It has been a long time, possibly months - I've mostly been using
PREEMPT_RT. But now I am working on a soft RT project that for various
reasons would like to use the mainline kernel, and I've found it still
has some scheduling bumps up to 5-7ms and am trying to identify the
problem.
Would you like me to do a binary search?
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 14:56 ` Lee Revell
@ 2005-11-28 16:00 ` Ingo Molnar
2005-11-28 17:50 ` Lee Revell
` (2 more replies)
0 siblings, 3 replies; 33+ messages in thread
From: Ingo Molnar @ 2005-11-28 16:00 UTC (permalink / raw)
To: Lee Revell; +Cc: Thomas Gleixner, linux-kernel, david singleton
* Lee Revell <rlrevell@joe-job.com> wrote:
> On Mon, 2005-11-28 at 12:48 +0100, Ingo Molnar wrote:
> > which was the last -rt kernel that worked fine for you in
> > PREEMPT_DESKTOP mode?
>
> It has been a long time, possibly months - I've mostly been using
> PREEMPT_RT. But now I am working on a soft RT project that for
> various reasons would like to use the mainline kernel, and I've found
> it still has some scheduling bumps up to 5-7ms and am trying to
> identify the problem.
ok.
> Would you like me to do a binary search?
that would certainly be very helpful!
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 16:00 ` Ingo Molnar
@ 2005-11-28 17:50 ` Lee Revell
2005-11-28 20:34 ` Lee Revell
2005-11-28 22:40 ` Lee Revell
2 siblings, 0 replies; 33+ messages in thread
From: Lee Revell @ 2005-11-28 17:50 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Mon, 2005-11-28 at 17:00 +0100, Ingo Molnar wrote:
> * Lee Revell <rlrevell@joe-job.com> wrote:
>
> > On Mon, 2005-11-28 at 12:48 +0100, Ingo Molnar wrote:
> > > which was the last -rt kernel that worked fine for you in
> > > PREEMPT_DESKTOP mode?
> >
> > It has been a long time, possibly months - I've mostly been using
> > PREEMPT_RT. But now I am working on a soft RT project that for
> > various reasons would like to use the mainline kernel, and I've found
> > it still has some scheduling bumps up to 5-7ms and am trying to
> > identify the problem.
>
> ok.
>
> > Would you like me to do a binary search?
>
> that would certainly be very helpful!
>
OK, 2.6.13-rt12 has the same problem. I'm trying
2.6.13-rc4-RT-V0.7.52-02 now which is the oldest thing I still have
around.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 16:00 ` Ingo Molnar
2005-11-28 17:50 ` Lee Revell
@ 2005-11-28 20:34 ` Lee Revell
2005-11-28 22:40 ` Lee Revell
2 siblings, 0 replies; 33+ messages in thread
From: Lee Revell @ 2005-11-28 20:34 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Mon, 2005-11-28 at 17:00 +0100, Ingo Molnar wrote:
> * Lee Revell <rlrevell@joe-job.com> wrote:
>
> > On Mon, 2005-11-28 at 12:48 +0100, Ingo Molnar wrote:
> > > which was the last -rt kernel that worked fine for you in
> > > PREEMPT_DESKTOP mode?
> >
> > It has been a long time, possibly months - I've mostly been using
> > PREEMPT_RT. But now I am working on a soft RT project that for
> > various reasons would like to use the mainline kernel, and I've found
> > it still has some scheduling bumps up to 5-7ms and am trying to
> > identify the problem.
>
> ok.
>
> > Would you like me to do a binary search?
>
> that would certainly be very helpful!
>
With 2.6.13-rc4-RT-V0.7.52-02 (the oldest version I still have around) I
still can't build that config, but it fails with:
LD .tmp_vmlinux1
net/built-in.o: In function `rt_check_expire':
route.c:(.text+0x1a66a): undefined reference to `__bad_spinlock_type'
route.c:(.text+0x1a68d): undefined reference to `__bad_spinlock_type'
net/built-in.o: In function `rt_run_flush':
route.c:(.text+0x1a7c1): undefined reference to `__bad_spinlock_type'
route.c:(.text+0x1a7d9): undefined reference to `__bad_spinlock_type'
net/built-in.o: In function `rt_garbage_collect':
route.c:(.text+0x1aa2a): undefined reference to `__bad_spinlock_type'
net/built-in.o:route.c:(.text+0x1aa55): more undefined references to
`__bad_spinlock_type' follow
make: *** [.tmp_vmlinux1] Error 1
AFAICT all the realtime-preempt patches have references to
__bad_spinlock_type but none of them ever define it - I can't figure out
what's going on.
I'll try to build something older.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 16:00 ` Ingo Molnar
2005-11-28 17:50 ` Lee Revell
2005-11-28 20:34 ` Lee Revell
@ 2005-11-28 22:40 ` Lee Revell
2005-11-29 2:08 ` Lee Revell
2 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-28 22:40 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Mon, 2005-11-28 at 17:00 +0100, Ingo Molnar wrote:
> > On Mon, 2005-11-28 at 12:48 +0100, Ingo Molnar wrote:
> > > which was the last -rt kernel that worked fine for you in
> > > PREEMPT_DESKTOP mode?
> >
> > Would you like me to do a binary search?
>
> that would certainly be very helpful!
>
Well, 2.6.11-RT-V0.7.40-04 works...
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-28 22:40 ` Lee Revell
@ 2005-11-29 2:08 ` Lee Revell
2005-11-29 7:29 ` Ingo Molnar
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-11-29 2:08 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Mon, 2005-11-28 at 17:40 -0500, Lee Revell wrote:
> 2.6.11-RT-V0.7.40-04 works
and 2.6.12-RT-V0.7.51-28 does not.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-29 2:08 ` Lee Revell
@ 2005-11-29 7:29 ` Ingo Molnar
2005-11-29 9:32 ` Ingo Molnar
0 siblings, 1 reply; 33+ messages in thread
From: Ingo Molnar @ 2005-11-29 7:29 UTC (permalink / raw)
To: Lee Revell; +Cc: Thomas Gleixner, linux-kernel, david singleton
* Lee Revell <rlrevell@joe-job.com> wrote:
> On Mon, 2005-11-28 at 17:40 -0500, Lee Revell wrote:
> > 2.6.11-RT-V0.7.40-04 works
>
> and 2.6.12-RT-V0.7.51-28 does not.
thanks. I have further narrowed it down from this point: your .config
breaks from the 51-01 to the 51-02 kernel (on my testbox).
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-29 7:29 ` Ingo Molnar
@ 2005-11-29 9:32 ` Ingo Molnar
2005-11-29 23:19 ` Lee Revell
2005-12-09 1:05 ` Lee Revell
0 siblings, 2 replies; 33+ messages in thread
From: Ingo Molnar @ 2005-11-29 9:32 UTC (permalink / raw)
To: Lee Revell; +Cc: Thomas Gleixner, linux-kernel, david singleton
* Ingo Molnar <mingo@elte.hu> wrote:
> * Lee Revell <rlrevell@joe-job.com> wrote:
>
> > On Mon, 2005-11-28 at 17:40 -0500, Lee Revell wrote:
> > > 2.6.11-RT-V0.7.40-04 works
> >
> > and 2.6.12-RT-V0.7.51-28 does not.
>
> thanks. I have further narrowed it down from this point: your .config
> breaks from the 51-01 to the 51-02 kernel (on my testbox).
ok, fixed this one, it was the CURRENT_PTR optimization on UP that broke
if 4K stacks were enabled. (i disabled the optimization for now)
But interestingly, your .config unearthed 2 other serious bugs (!) as
well: the spin_unlock_irq() upon printk was incorrect for !PREEMPT_RT,
and there was an assert introduced by the get-rid-of-bitlocks ext3
patches which was invalid on UP && !PREEMPT_RT. We had these bugs for
quite some time.
I've released -rt21 with these fixes, does it work better for you?
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-29 9:32 ` Ingo Molnar
@ 2005-11-29 23:19 ` Lee Revell
2005-12-09 1:05 ` Lee Revell
1 sibling, 0 replies; 33+ messages in thread
From: Lee Revell @ 2005-11-29 23:19 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Tue, 2005-11-29 at 10:32 +0100, Ingo Molnar wrote:
> I've released -rt21 with these fixes, does it work better for you?
Thanks, this works perfectly.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-11-29 9:32 ` Ingo Molnar
2005-11-29 23:19 ` Lee Revell
@ 2005-12-09 1:05 ` Lee Revell
2005-12-10 0:25 ` Lee Revell
1 sibling, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-12-09 1:05 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Tue, 2005-11-29 at 10:32 +0100, Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > * Lee Revell <rlrevell@joe-job.com> wrote:
> >
> > > On Mon, 2005-11-28 at 17:40 -0500, Lee Revell wrote:
> > > > 2.6.11-RT-V0.7.40-04 works
> > >
> > > and 2.6.12-RT-V0.7.51-28 does not.
> >
> > thanks. I have further narrowed it down from this point: your .config
> > breaks from the 51-01 to the 51-02 kernel (on my testbox).
>
> ok, fixed this one, it was the CURRENT_PTR optimization on UP that broke
> if 4K stacks were enabled. (i disabled the optimization for now)
>
> But interestingly, your .config unearthed 2 other serious bugs (!) as
> well: the spin_unlock_irq() upon printk was incorrect for !PREEMPT_RT,
> and there was an assert introduced by the get-rid-of-bitlocks ext3
> patches which was invalid on UP && !PREEMPT_RT. We had these bugs for
> quite some time.
>
> I've released -rt21 with these fixes, does it work better for you?
Ingo,
We are unable to build a similar .config (PREEMPT_DESKTOP with soft and
hardirq preemption disabled) on x86-64:
In file included from include/linux/mm.h:15,
from kernel/printk.c:20:
include/linux/fs.h: In function `lock_super':
include/linux/fs.h:849: warning: implicit declaration of function `down'
include/linux/fs.h: In function `unlock_super':
include/linux/fs.h:855: warning: implicit declaration of function `up'
Let me know if you need the exact .config
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.14-rt15: cannot build with !PREEMPT_RT
2005-12-09 1:05 ` Lee Revell
@ 2005-12-10 0:25 ` Lee Revell
2005-12-12 17:44 ` 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT) Lee Revell
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-12-10 0:25 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
[-- Attachment #1: Type: text/plain, Size: 2644 bytes --]
On Thu, 2005-12-08 at 20:05 -0500, Lee Revell wrote:
> On Tue, 2005-11-29 at 10:32 +0100, Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> >
> > > * Lee Revell <rlrevell@joe-job.com> wrote:
> > >
> > > > On Mon, 2005-11-28 at 17:40 -0500, Lee Revell wrote:
> > > > > 2.6.11-RT-V0.7.40-04 works
> > > >
> > > > and 2.6.12-RT-V0.7.51-28 does not.
> > >
> > > thanks. I have further narrowed it down from this point: your .config
> > > breaks from the 51-01 to the 51-02 kernel (on my testbox).
> >
> > ok, fixed this one, it was the CURRENT_PTR optimization on UP that broke
> > if 4K stacks were enabled. (i disabled the optimization for now)
> >
> > But interestingly, your .config unearthed 2 other serious bugs (!) as
> > well: the spin_unlock_irq() upon printk was incorrect for !PREEMPT_RT,
> > and there was an assert introduced by the get-rid-of-bitlocks ext3
> > patches which was invalid on UP && !PREEMPT_RT. We had these bugs for
> > quite some time.
> >
> > I've released -rt21 with these fixes, does it work better for you?
> We are unable to build a similar .config (PREEMPT_DESKTOP with soft and
> hardirq preemption disabled) on x86-64:
Here is the build output, .config attached.
Lee
$ make ARCH=x86_64
CHK include/linux/version.h
scripts/kconfig/conf -s arch/x86_64/Kconfig
#
# using defaults found in .config
#
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/x86_64/kernel/asm-offsets.s
GEN include/asm-x86_64/asm-offsets.h
HOSTCC scripts/testlpp
CC init/main.o
In file included from include/linux/proc_fs.h:6,
from init/main.c:17:
include/linux/fs.h: In function 'lock_super':
include/linux/fs.h:849: warning: implicit declaration of function 'down'
include/linux/fs.h: In function 'unlock_super':
include/linux/fs.h:855: warning: implicit declaration of function 'up'
CHK include/linux/compile.h
CC init/version.o
CC init/do_mounts.o
In file included from include/linux/tty.h:20,
from init/do_mounts.c:5:
include/linux/fs.h: In function 'lock_super':
include/linux/fs.h:849: warning: implicit declaration of function 'down'
include/linux/fs.h: In function 'unlock_super':
include/linux/fs.h:855: warning: implicit declaration of function 'up'
CC init/do_mounts_rd.o
In file included from init/do_mounts_rd.c:3:
include/linux/fs.h: In function 'lock_super':
include/linux/fs.h:849: warning: implicit declaration of function 'down'
include/linux/fs.h: In function 'unlock_super':
include/linux/fs.h:855: warning: implicit declaration of function 'up'
CC init/do_mounts_initrd.o
etc
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 35145 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rt22
# Wed Dec 7 14:45:10 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
# CONFIG_PARANOID_GENERIC_TIME is not set
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
# CONFIG_KOBJECT_UEVENT is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT_DESKTOP=y
# CONFIG_PREEMPT_RT is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
# CONFIG_SPINLOCK_BKL is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_K8_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_NUMA=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_X86_PM_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_NUMA is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_UNORDERED_IO is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
# CONFIG_IP_NF_MATCH_CONNBYTES is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_NET_CLS_IND=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_AHCI=m
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
CONFIG_SCSI_SATA_MV=m
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
CONFIG_RTC_HISTOGRAM=y
CONFIG_BLOCKER=y
CONFIG_LPPTEST=m
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
# CONFIG_USB_ATM is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
#
# SN Devices
#
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_IGNORE_LOGLEVEL is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_WAKEUP_TIMING is not set
# CONFIG_CRITICAL_PREEMPT_TIMING is not set
# CONFIG_CRITICAL_IRQSOFF_TIMING is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SECLVL is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
^ permalink raw reply [flat|nested] 33+ messages in thread
* 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-10 0:25 ` Lee Revell
@ 2005-12-12 17:44 ` Lee Revell
2005-12-12 21:49 ` Steven Rostedt
0 siblings, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-12-12 17:44 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton
On Fri, 2005-12-09 at 19:25 -0500, Lee Revell wrote:
> > We are unable to build a similar .config (PREEMPT_DESKTOP with soft and
> > hardirq preemption disabled) on x86-64:
>
> Here is the build output, .config attached.
Similar problem with 2.6.15-rc5-rt1:
$ make
CHK include/linux/version.h
UPD include/linux/version.h
SYMLINK include/asm -> include/asm-x86_64
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/x86_64/kernel/asm-offsets.s
In file included from include/asm/semaphore.h:48,
from include/linux/sched.h:20,
from arch/x86_64/kernel/asm-offsets.c:7:
include/linux/rwsem.h:43:66: error: asm/rwsem.h: No such file or
directory
In file included from include/asm/semaphore.h:48,
from include/linux/sched.h:20,
from arch/x86_64/kernel/asm-offsets.c:7:
include/linux/rwsem.h: In function 'compat_down_read':
include/linux/rwsem.h:61: warning: implicit declaration of function
'__down_read'
include/linux/rwsem.h: In function 'compat_down_read_trylock':
include/linux/rwsem.h:72: warning: implicit declaration of function
'__down_read_trylock'
include/linux/rwsem.h: In function 'compat_down_write':
include/linux/rwsem.h:84: warning: implicit declaration of function
'__down_write'
include/linux/rwsem.h: In function 'compat_down_write_trylock':
include/linux/rwsem.h:95: warning: implicit declaration of function
'__down_write_trylock'
include/linux/rwsem.h: In function 'compat_up_read':
include/linux/rwsem.h:106: warning: implicit declaration of function
'__up_read'
include/linux/rwsem.h: In function 'compat_up_write':
include/linux/rwsem.h:116: warning: implicit declaration of function
'__up_write'
include/linux/rwsem.h: In function 'compat_downgrade_write':
include/linux/rwsem.h:126: warning: implicit declaration of function
'__downgrade_write'
include/linux/rwsem.h: In function 'init_rwsem':
include/linux/rwsem.h:136: warning: implicit declaration of function
'compat_init_rwsem'
In file included from arch/x86_64/kernel/asm-offsets.c:7:
include/linux/sched.h: At top level:
include/linux/sched.h:485: error: field 'mmap_sem' has incomplete type
make[1]: *** [arch/x86_64/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 17:44 ` 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT) Lee Revell
@ 2005-12-12 21:49 ` Steven Rostedt
2005-12-12 22:14 ` Lee Revell
2005-12-13 8:15 ` Ingo Molnar
0 siblings, 2 replies; 33+ messages in thread
From: Steven Rostedt @ 2005-12-12 21:49 UTC (permalink / raw)
To: Lee Revell; +Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 12:44 -0500, Lee Revell wrote:
> On Fri, 2005-12-09 at 19:25 -0500, Lee Revell wrote:
> > > We are unable to build a similar .config (PREEMPT_DESKTOP with soft and
> > > hardirq preemption disabled) on x86-64:
> >
> > Here is the build output, .config attached.
>
> Similar problem with 2.6.15-rc5-rt1:
>
> $ make
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-x86_64
> SPLIT include/linux/autoconf.h -> include/config/*
> CC arch/x86_64/kernel/asm-offsets.s
> In file included from include/asm/semaphore.h:48,
> from include/linux/sched.h:20,
> from arch/x86_64/kernel/asm-offsets.c:7:
> include/linux/rwsem.h:43:66: error: asm/rwsem.h: No such file or
> directory
> In file included from include/asm/semaphore.h:48,
> from include/linux/sched.h:20,
> from arch/x86_64/kernel/asm-offsets.c:7:
Looks like Ingo has a generic rwsem to work with, but if your arch turns
on CONFIG_RWSEM_XCHGADD_ALGORITHM, it will compile lib/rwsem.c which
won't compile as you've seen.
Try out this patch: I changed the Makefile, instead of going to each
and every arch and change its Kconfig to do it properly.
-- Steve
Index: linux-2.6.15-rc5-rt1/lib/Makefile
===================================================================
--- linux-2.6.15-rc5-rt1.orig/lib/Makefile 2005-12-12 10:56:37.000000000 -0500
+++ linux-2.6.15-rc5-rt1/lib/Makefile 2005-12-12 16:23:47.000000000 -0500
@@ -19,7 +19,9 @@
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
obj-$(CONFIG_PREEMPT_RT) += plist.o
obj-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
+ifneq ($(CONFIG_RWSEM_GENERIC_SPINLOCK),y)
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
+endif
lib-$(CONFIG_SEMAPHORE_SLEEPERS) += semaphore-sleepers.o
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
Index: linux-2.6.15-rc5-rt1/arch/x86_64/kernel/x8664_ksyms.c
===================================================================
--- linux-2.6.15-rc5-rt1.orig/arch/x86_64/kernel/x8664_ksyms.c 2005-12-12 10:56:37.000000000 -0500
+++ linux-2.6.15-rc5-rt1/arch/x86_64/kernel/x8664_ksyms.c 2005-12-12 16:27:40.000000000 -0500
@@ -165,7 +165,7 @@
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__memcpy);
-#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM
+#if defined(CONFIG_RWSEM_XCHGADD_ALGORITHM) && !defined(CONFIG_RWSEM_GENERIC_SPINLOCK)
/* prototypes are wrong, these are assembly with custom calling functions */
extern void rwsem_down_read_failed_thunk(void);
extern void rwsem_wake_thunk(void);
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 21:49 ` Steven Rostedt
@ 2005-12-12 22:14 ` Lee Revell
2005-12-12 22:22 ` Steven Rostedt
2005-12-13 8:15 ` Ingo Molnar
1 sibling, 1 reply; 33+ messages in thread
From: Lee Revell @ 2005-12-12 22:14 UTC (permalink / raw)
To: Steven Rostedt
Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 16:49 -0500, Steven Rostedt wrote:
> On Mon, 2005-12-12 at 12:44 -0500, Lee Revell wrote:
> > On Fri, 2005-12-09 at 19:25 -0500, Lee Revell wrote:
> > > > We are unable to build a similar .config (PREEMPT_DESKTOP with soft and
> > > > hardirq preemption disabled) on x86-64:
> > >
> > > Here is the build output, .config attached.
> >
> > Similar problem with 2.6.15-rc5-rt1:
> >
> > $ make
> > CHK include/linux/version.h
> > UPD include/linux/version.h
> > SYMLINK include/asm -> include/asm-x86_64
> > SPLIT include/linux/autoconf.h -> include/config/*
> > CC arch/x86_64/kernel/asm-offsets.s
> > In file included from include/asm/semaphore.h:48,
> > from include/linux/sched.h:20,
> > from arch/x86_64/kernel/asm-offsets.c:7:
> > include/linux/rwsem.h:43:66: error: asm/rwsem.h: No such file or
> > directory
> > In file included from include/asm/semaphore.h:48,
> > from include/linux/sched.h:20,
> > from arch/x86_64/kernel/asm-offsets.c:7:
>
> Looks like Ingo has a generic rwsem to work with, but if your arch turns
> on CONFIG_RWSEM_XCHGADD_ALGORITHM, it will compile lib/rwsem.c which
> won't compile as you've seen.
>
> Try out this patch: I changed the Makefile, instead of going to each
> and every arch and change its Kconfig to do it properly.
The patch had no effect.
In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
in include/linux/rwsem.h causes asm/rwsem.h to be included which does
not exist on x86-64:
36 #ifdef CONFIG_RWSEM_GENERIC_SPINLOCK
37 # include <linux/rwsem-spinlock.h> /* use a generic implementation */
38 # ifndef CONFIG_PREEMPT_RT
39 # define __RWSEM_INITIALIZER __COMPAT_RWSEM_INITIALIZER
40 # define DECLARE_RWSEM COMPAT_DECLARE_RWSEM
41 # endif
42 #else
43 # include <asm/rwsem.h> /* use an arch-specific implementation */
44 #endif
If I change that code to always include <linux/rwsem-spinlock.h>, I get
the exact same failures I did with 2.6.14-rt22:
$ make
CHK include/linux/version.h
CC arch/x86_64/kernel/asm-offsets.s
GEN include/asm-x86_64/asm-offsets.h
CC init/main.o
In file included from include/linux/proc_fs.h:6,
from init/main.c:17:
include/linux/fs.h: In function 'lock_super':
include/linux/fs.h:867: warning: implicit declaration of function 'down'
include/linux/fs.h: In function 'unlock_super':
include/linux/fs.h:873: warning: implicit declaration of function 'up'
CHK include/linux/compile.h
CC init/version.o
CC init/do_mounts.o
In file included from include/linux/tty.h:20,
from init/do_mounts.c:5:
include/linux/fs.h: In function 'lock_super':
include/linux/fs.h:867: warning: implicit declaration of function 'down'
include/linux/fs.h: In function 'unlock_super':
include/linux/fs.h:873: warning: implicit declaration of function 'up'
etc.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 22:14 ` Lee Revell
@ 2005-12-12 22:22 ` Steven Rostedt
2005-12-12 22:31 ` Lee Revell
2005-12-12 22:39 ` K.R. Foley
0 siblings, 2 replies; 33+ messages in thread
From: Steven Rostedt @ 2005-12-12 22:22 UTC (permalink / raw)
To: Lee Revell; +Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 17:14 -0500, Lee Revell wrote:
>
> The patch had no effect.
The patch should work for krfoley though. His errors where the same
that I had for i386. I also have it working under x86_64.
>
> In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
> in include/linux/rwsem.h causes asm/rwsem.h to be included which does
> not exist on x86-64:
Yeah OK, you have a different problem. Did you post your .config? You
can send it privately to me if you haven't already posted it.
-- Steve
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 22:22 ` Steven Rostedt
@ 2005-12-12 22:31 ` Lee Revell
2005-12-12 22:34 ` Steven Rostedt
2005-12-13 3:28 ` Steven Rostedt
2005-12-12 22:39 ` K.R. Foley
1 sibling, 2 replies; 33+ messages in thread
From: Lee Revell @ 2005-12-12 22:31 UTC (permalink / raw)
To: Steven Rostedt
Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 17:22 -0500, Steven Rostedt wrote:
> On Mon, 2005-12-12 at 17:14 -0500, Lee Revell wrote:
>
> >
> > The patch had no effect.
>
> The patch should work for krfoley though. His errors where the same
> that I had for i386. I also have it working under x86_64.
> >
> > In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
> > in include/linux/rwsem.h causes asm/rwsem.h to be included which does
> > not exist on x86-64:
>
> Yeah OK, you have a different problem. Did you post your .config? You
> can send it privately to me if you haven't already posted it.
Yes I posted the .config earlier in the thread. Let me know if you want
me to resend it to you.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 22:31 ` Lee Revell
@ 2005-12-12 22:34 ` Steven Rostedt
2005-12-13 3:28 ` Steven Rostedt
1 sibling, 0 replies; 33+ messages in thread
From: Steven Rostedt @ 2005-12-12 22:34 UTC (permalink / raw)
To: Lee Revell; +Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 12 Dec 2005, Lee Revell wrote:
>
> Yes I posted the .config earlier in the thread. Let me know if you want
> me to resend it to you.
>
Yeah, could you send it to me privately. I see a .config, but that was
for the 2.6.14-rt15 thread.
Send it to me and I'll try to compile it later tonight.
-- Steve
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 22:22 ` Steven Rostedt
2005-12-12 22:31 ` Lee Revell
@ 2005-12-12 22:39 ` K.R. Foley
1 sibling, 0 replies; 33+ messages in thread
From: K.R. Foley @ 2005-12-12 22:39 UTC (permalink / raw)
To: Steven Rostedt
Cc: Lee Revell, david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
Steven Rostedt wrote:
> On Mon, 2005-12-12 at 17:14 -0500, Lee Revell wrote:
>
>> The patch had no effect.
>
> The patch should work for krfoley though. His errors where the same
> that I had for i386. I also have it working under x86_64.
Yes it does. Sorry I hadn't responded yet. Thanks. Now just wish I could
get it booted. :)
>> In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
>> in include/linux/rwsem.h causes asm/rwsem.h to be included which does
>> not exist on x86-64:
>
> Yeah OK, you have a different problem. Did you post your .config? You
> can send it privately to me if you haven't already posted it.
>
> -- Steve
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
kr
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 22:31 ` Lee Revell
2005-12-12 22:34 ` Steven Rostedt
@ 2005-12-13 3:28 ` Steven Rostedt
2005-12-13 8:08 ` Ingo Molnar
2005-12-16 20:53 ` Lee Revell
1 sibling, 2 replies; 33+ messages in thread
From: Steven Rostedt @ 2005-12-13 3:28 UTC (permalink / raw)
To: Lee Revell; +Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 17:31 -0500, Lee Revell wrote:
> On Mon, 2005-12-12 at 17:22 -0500, Steven Rostedt wrote:
> > On Mon, 2005-12-12 at 17:14 -0500, Lee Revell wrote:
> >
> > >
> > > The patch had no effect.
> >
> > The patch should work for krfoley though. His errors where the same
> > that I had for i386. I also have it working under x86_64.
> > >
> > > In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
> > > in include/linux/rwsem.h causes asm/rwsem.h to be included which does
> > > not exist on x86-64:
> >
> > Yeah OK, you have a different problem. Did you post your .config? You
> > can send it privately to me if you haven't already posted it.
>
> Yes I posted the .config earlier in the thread. Let me know if you want
> me to resend it to you.
Here Lee,
I got it to compile, but I haven't yet tried to boot it. As a matter of
fact, I haven't booted any 2.6.15-rc5-rt1 on any of my machines. I must
trust Ingo too much, since I started porting my kernel to his before
testing it to see if it works without my changes. Oh well, I know what
to do tomorrow.
Well, this compiles, you can see if it boots ;-)
-- Steve
Index: linux-2.6.15-rc5-rt1/arch/x86_64/Kconfig
===================================================================
--- linux-2.6.15-rc5-rt1.orig/arch/x86_64/Kconfig 2005-12-12 10:56:37.000000000 -0500
+++ linux-2.6.15-rc5-rt1/arch/x86_64/Kconfig 2005-12-12 21:33:56.000000000 -0500
@@ -240,7 +240,6 @@
config RWSEM_GENERIC_SPINLOCK
bool
- depends on PREEMPT_RT
default y
config RWSEM_XCHGADD_ALGORITHM
Index: linux-2.6.15-rc5-rt1/include/asm-x86_64/semaphore.h
===================================================================
--- linux-2.6.15-rc5-rt1.orig/include/asm-x86_64/semaphore.h 2005-12-12 10:56:37.000000000 -0500
+++ linux-2.6.15-rc5-rt1/include/asm-x86_64/semaphore.h 2005-12-12 22:13:08.000000000 -0500
@@ -104,6 +104,7 @@
asmlinkage int __compat_down_interruptible(struct compat_semaphore * sem);
asmlinkage int __compat_down_trylock(struct compat_semaphore * sem);
asmlinkage void __compat_up(struct compat_semaphore * sem);
+asmlinkage int compat_sem_is_locked(struct compat_semaphore *sem);
/*
* This is ugly, but we want the default case to fall through.
@@ -199,5 +200,10 @@
:"D" (sem)
:"memory");
}
+
+#ifndef CONFIG_PREEMPT_RT
+# include <linux/semaphore.h>
+#endif
+
#endif /* __KERNEL__ */
#endif
Index: linux-2.6.15-rc5-rt1/include/linux/rwsem.h
===================================================================
--- linux-2.6.15-rc5-rt1.orig/include/linux/rwsem.h 2005-12-12 10:56:37.000000000 -0500
+++ linux-2.6.15-rc5-rt1/include/linux/rwsem.h 2005-12-12 22:13:00.000000000 -0500
@@ -163,6 +163,10 @@
{
compat_downgrade_write(rwsem);
}
+static inline int rwsem_is_locked(struct compat_rw_semaphore *sem)
+{
+ return compat_rwsem_is_locked(sem);
+}
#endif /* CONFIG_PREEMPT_RT */
#endif /* __KERNEL__ */
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-13 3:28 ` Steven Rostedt
@ 2005-12-13 8:08 ` Ingo Molnar
2005-12-16 20:53 ` Lee Revell
1 sibling, 0 replies; 33+ messages in thread
From: Ingo Molnar @ 2005-12-13 8:08 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Lee Revell, david singleton, linux-kernel, Thomas Gleixner
* Steven Rostedt <rostedt@goodmis.org> wrote:
> Here Lee,
>
> I got it to compile, but I haven't yet tried to boot it. As a matter
> of fact, I haven't booted any 2.6.15-rc5-rt1 on any of my machines. I
> must trust Ingo too much, since I started porting my kernel to his
> before testing it to see if it works without my changes. Oh well, I
> know what to do tomorrow.
thanks, i have applied most of this patch.
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-12 21:49 ` Steven Rostedt
2005-12-12 22:14 ` Lee Revell
@ 2005-12-13 8:15 ` Ingo Molnar
2005-12-13 14:32 ` [PATCH -RT] fix i386 RWSEM_GENERIC_SPINLOCK (was: Re: 2.6.15-rc5-rt1 will not compile) Steven Rostedt
1 sibling, 1 reply; 33+ messages in thread
From: Ingo Molnar @ 2005-12-13 8:15 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Lee Revell, david singleton, linux-kernel, Thomas Gleixner
* Steven Rostedt <rostedt@goodmis.org> wrote:
> Looks like Ingo has a generic rwsem to work with, but if your arch
> turns on CONFIG_RWSEM_XCHGADD_ALGORITHM, it will compile lib/rwsem.c
> which won't compile as you've seen.
>
> Try out this patch: I changed the Makefile, instead of going to each
> and every arch and change its Kconfig to do it properly.
i rather went for fixing up the Kconfig, that makes things easier to
follow. If it turns out to be lots of duplicate stuff we could create a
lib/Kconfig.rwsem that architectures can include.
Ingo
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH -RT] fix i386 RWSEM_GENERIC_SPINLOCK (was: Re: 2.6.15-rc5-rt1 will not compile)
2005-12-13 8:15 ` Ingo Molnar
@ 2005-12-13 14:32 ` Steven Rostedt
2005-12-13 15:03 ` Steven Rostedt
0 siblings, 1 reply; 33+ messages in thread
From: Steven Rostedt @ 2005-12-13 14:32 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Lee Revell, david singleton, linux-kernel, Thomas Gleixner
On Tue, 2005-12-13 at 09:15 +0100, Ingo Molnar wrote:
> * Steven Rostedt <rostedt@goodmis.org> wrote:
>
> > Looks like Ingo has a generic rwsem to work with, but if your arch
> > turns on CONFIG_RWSEM_XCHGADD_ALGORITHM, it will compile lib/rwsem.c
> > which won't compile as you've seen.
> >
> > Try out this patch: I changed the Makefile, instead of going to each
> > and every arch and change its Kconfig to do it properly.
>
> i rather went for fixing up the Kconfig, that makes things easier to
> follow. If it turns out to be lots of duplicate stuff we could create a
> lib/Kconfig.rwsem that architectures can include.
>
OK, scratch my last patch. I'll submit this arch per arch. Starting
with i386. Each arch does it differently, so a generic lib/Konfig.rwsem
wouldn't work, since each arch has a different dependency.
-- Steve
Quick note:
I originally had: default y if !(RWSEM_GENERIC_SPINLOCK || PREEMPT_RT || M386)
But then I realized that RWSEM_GENERIC_SPINLOCK was dependent on
(PREEMPT_RT || M386) so I thought it was redundant to keep the three,
since RWSEM_GENERIC_SPINLOCK itself satisfies the dependencies.
Index: linux-2.6.15-rc5-rt1/arch/i386/Kconfig
===================================================================
--- linux-2.6.15-rc5-rt1.orig/arch/i386/Kconfig 2005-12-12 16:31:25.000000000 -0500
+++ linux-2.6.15-rc5-rt1/arch/i386/Kconfig 2005-12-13 09:14:33.000000000 -0500
@@ -245,8 +245,7 @@
config RWSEM_XCHGADD_ALGORITHM
bool
- depends on !RWSEM_GENERIC_SPINLOCK && !PREEMPT_RT
- default y
+ default y if !RWSEM_GENERIC_SPINLOCK
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
Index: linux-2.6.15-rc5-rt1/arch/i386/Kconfig.cpu
===================================================================
--- linux-2.6.15-rc5-rt1.orig/arch/i386/Kconfig.cpu 2005-12-12 16:31:20.000000000 -0500
+++ linux-2.6.15-rc5-rt1/arch/i386/Kconfig.cpu 2005-12-13 09:10:54.000000000 -0500
@@ -229,11 +229,6 @@
depends on M386
default y
-config RWSEM_XCHGADD_ALGORITHM
- bool
- depends on !M386
- default y
-
config GENERIC_CALIBRATE_DELAY
bool
default y
Index: linux-2.6.15-rc5-rt1/arch/i386/defconfig
===================================================================
--- linux-2.6.15-rc5-rt1.orig/arch/i386/defconfig 2005-10-27 20:02:08.000000000 -0400
+++ linux-2.6.15-rc5-rt1/arch/i386/defconfig 2005-12-13 09:05:21.000000000 -0500
@@ -81,7 +81,7 @@
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH -RT] fix i386 RWSEM_GENERIC_SPINLOCK (was: Re: 2.6.15-rc5-rt1 will not compile)
2005-12-13 14:32 ` [PATCH -RT] fix i386 RWSEM_GENERIC_SPINLOCK (was: Re: 2.6.15-rc5-rt1 will not compile) Steven Rostedt
@ 2005-12-13 15:03 ` Steven Rostedt
0 siblings, 0 replies; 33+ messages in thread
From: Steven Rostedt @ 2005-12-13 15:03 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Thomas Gleixner, linux-kernel, david singleton, Lee Revell
On Tue, 2005-12-13 at 09:32 -0500, Steven Rostedt wrote:
> >
>
> OK, scratch my last patch. I'll submit this arch per arch. Starting
> with i386. Each arch does it differently, so a generic lib/Konfig.rwsem
> wouldn't work, since each arch has a different dependency.
I guess this may be the only patch needed so far. x86_64 doesn't use a
RWSEM_XCHGADD_ALGORITHM, and as for the other archs:
alpha and ia64 - doesn't have PREEPMT_RT yet.
arm, cris, frv, h8300, m32r, parsic don't seem to implement the XCHGADD.
But I see that powerpc will need a fix, but I'll let others who actually
have the boards to fix them. ;-)
As for what I own: x86_64 and i386, the patches I sent are sufficient.
If anyone would like to give me a special board (to keep), I'll gladly
make sure that Ingo's -RT kernel runs on it.
-- Steve
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT)
2005-12-13 3:28 ` Steven Rostedt
2005-12-13 8:08 ` Ingo Molnar
@ 2005-12-16 20:53 ` Lee Revell
1 sibling, 0 replies; 33+ messages in thread
From: Lee Revell @ 2005-12-16 20:53 UTC (permalink / raw)
To: Steven Rostedt
Cc: david singleton, linux-kernel, Thomas Gleixner, Ingo Molnar
On Mon, 2005-12-12 at 22:28 -0500, Steven Rostedt wrote:
> On Mon, 2005-12-12 at 17:31 -0500, Lee Revell wrote:
> > On Mon, 2005-12-12 at 17:22 -0500, Steven Rostedt wrote:
> > > On Mon, 2005-12-12 at 17:14 -0500, Lee Revell wrote:
> > >
> > > >
> > > > The patch had no effect.
> > >
> > > The patch should work for krfoley though. His errors where the same
> > > that I had for i386. I also have it working under x86_64.
> > > >
> > > > In fact x86-64 does not set CONFIG_RWSEM_XCHGADD_ALGORITHM so this test
> > > > in include/linux/rwsem.h causes asm/rwsem.h to be included which does
> > > > not exist on x86-64:
> > >
> > > Yeah OK, you have a different problem. Did you post your .config? You
> > > can send it privately to me if you haven't already posted it.
> >
> > Yes I posted the .config earlier in the thread. Let me know if you want
> > me to resend it to you.
>
> Here Lee,
>
> I got it to compile, but I haven't yet tried to boot it. As a matter of
> fact, I haven't booted any 2.6.15-rc5-rt1 on any of my machines. I must
> trust Ingo too much, since I started porting my kernel to his before
> testing it to see if it works without my changes. Oh well, I know what
> to do tomorrow.
>
> Well, this compiles, you can see if it boots ;-)
The first chunk of this patch (removing dependency of
RWSEM_GENERIC_SPINLOCK on PREEMPT_RT) is still needed to build
2.6.15-rc5-rt2 on x86-64. Not sure whether this boots yet.
2.6.15-rc5-rt1 compiles with the patch but does not boot.
Lee
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2005-12-16 20:51 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-26 6:52 2.6.14-rt15: cannot build with !PREEMPT_RT Lee Revell
2005-11-26 12:23 ` Ingo Molnar
2005-11-26 19:05 ` Lee Revell
2005-11-26 19:46 ` Thomas Gleixner
2005-11-27 12:30 ` Ingo Molnar
2005-11-27 19:57 ` Lee Revell
2005-11-28 11:44 ` Ingo Molnar
2005-11-28 1:27 ` Lee Revell
2005-11-28 11:48 ` Ingo Molnar
2005-11-28 14:56 ` Lee Revell
2005-11-28 16:00 ` Ingo Molnar
2005-11-28 17:50 ` Lee Revell
2005-11-28 20:34 ` Lee Revell
2005-11-28 22:40 ` Lee Revell
2005-11-29 2:08 ` Lee Revell
2005-11-29 7:29 ` Ingo Molnar
2005-11-29 9:32 ` Ingo Molnar
2005-11-29 23:19 ` Lee Revell
2005-12-09 1:05 ` Lee Revell
2005-12-10 0:25 ` Lee Revell
2005-12-12 17:44 ` 2.6.15-rc5-rt1 will not compile (was Re: 2.6.14-rt15: cannot build with !PREEMPT_RT) Lee Revell
2005-12-12 21:49 ` Steven Rostedt
2005-12-12 22:14 ` Lee Revell
2005-12-12 22:22 ` Steven Rostedt
2005-12-12 22:31 ` Lee Revell
2005-12-12 22:34 ` Steven Rostedt
2005-12-13 3:28 ` Steven Rostedt
2005-12-13 8:08 ` Ingo Molnar
2005-12-16 20:53 ` Lee Revell
2005-12-12 22:39 ` K.R. Foley
2005-12-13 8:15 ` Ingo Molnar
2005-12-13 14:32 ` [PATCH -RT] fix i386 RWSEM_GENERIC_SPINLOCK (was: Re: 2.6.15-rc5-rt1 will not compile) Steven Rostedt
2005-12-13 15:03 ` Steven Rostedt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).