[PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Matt Domsch]

Andi Kleen has a patch in his x86_64 tree which enables the use of
i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
memory spaces where the IPMI controllers may be found.

This patch adds equivalent changes for ia64 as to what is in the
x86_64 tree.

Tested on ia64 with 2.6.15, plus the 'dmi' patch from
ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt which Andi has queued for
submission for 2.6.16, plus a patch to ipmi_si_intf.c which will
follow separately.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 199eeaf..e4c7988 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -5,6 +5,10 @@
 
 mainmenu "IA-64 Linux Kernel Configuration"
 
+config DMI
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "Processor type and features"
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 307514f..6fc59ed 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y	:= head.o init_task.o vmlinux.ld
 obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o
+	 unwind.o mca.o mca_asm.o topology.o dmi_scan.o
 
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
@@ -25,6 +25,7 @@ obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_r
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
+dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5add0bc..03e0c60 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -43,6 +43,7 @@
 #include <linux/initrd.h>
 #include <linux/platform.h>
 #include <linux/pm.h>
+#include <linux/dmi.h>
 
 #include <asm/ia32.h>
 #include <asm/machvec.h>
@@ -870,3 +871,10 @@ check_bugs (void)
 	ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles,
 			       (unsigned long) __end___mckinley_e9_bundles);
 }
+
+static int __init run_dmi_scan(void)
+{
+	dmi_scan_machine();
+	return 0;
+}
+core_initcall(run_dmi_scan);
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
index cf772a6..54f7457 100644
--- a/include/asm-ia64/io.h
+++ b/include/asm-ia64/io.h
@@ -434,6 +434,11 @@ iounmap (volatile void __iomem *addr)
 
 #define ioremap_nocache(o,s)	ioremap(o,s)
 
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
 # ifdef __KERNEL__
 
 /*

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Alex Williamson]

On Wed, 2006-01-04 at 16:16 -0600, Matt Domsch wrote:
> Andi Kleen has a patch in his x86_64 tree which enables the use of
> i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
> drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
> memory spaces where the IPMI controllers may be found.

   Can't this be done via ACPI/EFI?  I'm really opposed to adding
anything to ia64 that blindly picks memory ranges and starts scanning
for magic legacy tables.  If nothing else, this can be found via
efi.smbios.  Thanks,

	Alex

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Alan Cox]

On Mer, 2006-01-04 at 16:16 -0600, Matt Domsch wrote:
> Andi Kleen has a patch in his x86_64 tree which enables the use of
> i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
> drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
> memory spaces where the IPMI controllers may be found.
> 
> This patch adds equivalent changes for ia64 as to what is in the
> x86_64 tree.

I was under the impression that the correct way to find the DMI tables
on IA64 was by the EFI[ng ;)] firmware interface

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Wed, Jan 04, 2006 at 03:36:03PM -0700, Alex Williamson wrote:
> On Wed, 2006-01-04 at 16:16 -0600, Matt Domsch wrote:
> > Andi Kleen has a patch in his x86_64 tree which enables the use of
> > i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
> > drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
> > memory spaces where the IPMI controllers may be found.
> 
>    Can't this be done via ACPI/EFI?  I'm really opposed to adding
> anything to ia64 that blindly picks memory ranges and starts scanning
> for magic legacy tables.  If nothing else, this can be found via
> efi.smbios.  Thanks,

I'll redo this to use efi.smbios.  Thanks for the tip.

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Wednesday 04 January 2006 16:29, Matt Domsch wrote:
> On Wed, Jan 04, 2006 at 03:36:03PM -0700, Alex Williamson wrote:
> > On Wed, 2006-01-04 at 16:16 -0600, Matt Domsch wrote:
> > > Andi Kleen has a patch in his x86_64 tree which enables the use
> > > of i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being
> > > used by the drivers/char/ipmi/ipmi_si_intf.c driver for
> > > autodetecting the ports or memory spaces where the IPMI
> > > controllers may be found.
> >
> >    Can't this be done via ACPI/EFI?  I'm really opposed to adding
> > anything to ia64 that blindly picks memory ranges and starts
> > scanning for magic legacy tables.  If nothing else, this can be
> > found via efi.smbios.  Thanks,
>
> I'll redo this to use efi.smbios.  Thanks for the tip.

The DMI scan looks like it's done in try_init_smbios().  But
try_init_acpi() is done first.  Since every ia64 machine has
ACPI, I would think try_init_acpi() should be sufficient.

Or do you have a machine that doesn't supply the SPMI
table used by try_init_acpi()?

Personally, I think try_init_acpi() should be re-done so it uses
the normal acpi_bus_register_driver() mechanism, which would
locate the IPMI device in the ACPI namespace.  I don't think
there's any need to rely on the SPMI, which is primarily there
to support OS's that want to do IPMI stuff early in boot, before
the ACPI machinery is ready.

Bjorn

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Thu, Jan 05, 2006 at 09:41:15AM -0700, Bjorn Helgaas wrote:
> The DMI scan looks like it's done in try_init_smbios().  But
> try_init_acpi() is done first.  Since every ia64 machine has
> ACPI, I would think try_init_acpi() should be sufficient.
> 
> Or do you have a machine that doesn't supply the SPMI
> table used by try_init_acpi()?

This system (Dell PowerEdge 7250, very very similar to an Intel 4-way
Itanium2 server) doesn't have an SPMI table, but it does have the IPMI
information in the SMBIOS table.

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Thursday 05 January 2006 10:37, Matt Domsch wrote:
> On Thu, Jan 05, 2006 at 09:41:15AM -0700, Bjorn Helgaas wrote:
> > The DMI scan looks like it's done in try_init_smbios().  But
> > try_init_acpi() is done first.  Since every ia64 machine has
> > ACPI, I would think try_init_acpi() should be sufficient.
> >
> > Or do you have a machine that doesn't supply the SPMI
> > table used by try_init_acpi()?
>
> This system (Dell PowerEdge 7250, very very similar to an Intel
> 4-way Itanium2 server) doesn't have an SPMI table, but it does have
> the IPMI information in the SMBIOS table.

But the IPMI device *should* be described in the ACPI namespace, so
using acpi_bus_register_driver() should be sufficient.

I think that would be a better approach than using the SMBIOS table.
But it is certainly a lot more work :-(

Bjorn

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Thursday 05 January 2006 10:54, Bjorn Helgaas wrote:
> On Thursday 05 January 2006 10:37, Matt Domsch wrote:
> > This system (Dell PowerEdge 7250, very very similar to an Intel
> > 4-way Itanium2 server) doesn't have an SPMI table, but it does have
> > the IPMI information in the SMBIOS table.
> 
> But the IPMI device *should* be described in the ACPI namespace, so
> using acpi_bus_register_driver() should be sufficient.

You mentioned on IRC that /sys/firmware/acpi/namespace didn't
contain anything that looked like an IPMI device.  Try dumping the
actual DSDT and looking there -- I'm not sure everything makes it
into /sys/firmware/acpi/...

Use the latest "pmtools" from here:
    http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils

and "iasl" to disassemble it.

I did this on an Intel Tiger, and didn't see any "IPI" devices in the
namespace either.  I think it's a firmware bug if the hardware
is there but not described in the namespace.

So maybe you'd have to grub through SMBIOS to workaround
the firmware defect.

Re: [PATCH 2.6.15 1/2] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Thu, Jan 05, 2006 at 05:02:00PM -0700, Bjorn Helgaas wrote:
> On Thursday 05 January 2006 10:54, Bjorn Helgaas wrote:
> > On Thursday 05 January 2006 10:37, Matt Domsch wrote:
> > > This system (Dell PowerEdge 7250, very very similar to an Intel
> > > 4-way Itanium2 server) doesn't have an SPMI table, but it does have
> > > the IPMI information in the SMBIOS table.
> > 
> > But the IPMI device *should* be described in the ACPI namespace, so
> > using acpi_bus_register_driver() should be sufficient.
> 
> You mentioned on IRC that /sys/firmware/acpi/namespace didn't
> contain anything that looked like an IPMI device.  Try dumping the
> actual DSDT and looking there -- I'm not sure everything makes it
> into /sys/firmware/acpi/...
> 
> Use the latest "pmtools" from here:
>     http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
> 
> and "iasl" to disassemble it.
> 
> I did this on an Intel Tiger, and didn't see any "IPI" devices in the
> namespace either.  I think it's a firmware bug if the hardware
> is there but not described in the namespace.
> 
> So maybe you'd have to grub through SMBIOS to workaround
> the firmware defect.

Indeed.  I updated the BIOS to the latest available, and it doesn't
list the IPMI controller in the ACPI namespace.  FWIW, this is
effectively an Intel S870BN4 "Tiger4" system.  FWIW2, the Dell
PowerEdge x8xx line (current shipping EM64T servers) doesn't have the
IPMI controller in the ACPI namespace either.

I reworked the patch, such that on EFI-capable systems, it uses
efi.smbios to find the _DMI_ table header, and on all non-EFI systems,
continues the brute force search from 0xF0000 as before.

Thanks,
Matt

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

[PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Matt Domsch]

Enable DMI table parsing on ia64.

Andi Kleen has a patch in his x86_64 tree which enables the use of
i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
memory spaces where the IPMI controllers may be found.
 
This patch adds equivalent changes for ia64 as to what is in the
x86_64 tree.  In addition, I reworked the DMI detection, such that on
EFI-capable systems, it uses the efi.smbios pointer to find the table,
rather than brute-force searching from 0xF0000.  On non-EFI systems,
it continues the brute-force search.

My test system, an Intel S870BN4 'Tiger4', aka Dell PowerEdge 7250,
with latest BIOS, does not list the IPMI controller in the ACPI
namespace, nor does it have an ACPI SPMI table.  Also note, currently
shipping Dell x8xx EM64T servers don't have these either, so DMI is
the only method for obtaining the address of the IPMI controller.

Tested on ia64 with 2.6.15, plus the 'dmi' patch from
ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt which Andi has queued for
submission for 2.6.16, plus a patch to ipmi_si_intf.c which will
follow separately.
 
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c
index 6a93d75..87fd0a1 100644
--- a/arch/i386/kernel/dmi_scan.c
+++ b/arch/i386/kernel/dmi_scan.c
@@ -5,6 +5,7 @@
 #include <linux/dmi.h>
 #include <linux/bootmem.h>
 #include <linux/slab.h>
+#include <linux/efi.h>
 
 static char * __init dmi_string(struct dmi_header *dm, u8 s)
 {
@@ -184,10 +185,36 @@ static void __init dmi_decode(struct dmi
 	}
 }
 
-void __init dmi_scan_machine(void)
+static int __init dmi_present(char __iomem *p)
 {
 	u8 buf[15];
+	memcpy_fromio(buf, p, 15);
+	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+		u16 num = (buf[13] << 8) | buf[12];
+		u16 len = (buf[7] << 8) | buf[6];
+		u32 base = (buf[11] << 24) | (buf[10] << 16) |
+			(buf[9] << 8) | buf[8];
+
+		/*
+		 * DMI version 0.0 means that the real version is taken from
+		 * the SMBIOS version, which we don't know at this point.
+		 */
+		if (buf[14] != 0)
+			printk(KERN_INFO "DMI %d.%d present.\n",
+			       buf[14] >> 4, buf[14] & 0xF);
+		else
+			printk(KERN_INFO "DMI present.\n");
+		if (dmi_table(base,len, num, dmi_decode) == 0)
+			return 0;
+	}
+	return 1;
+}
+
+#ifndef CONFIG_EFI
+void __init dmi_scan_machine(void)
+{
 	char __iomem *p, *q;
+	int rc;
 
 	/*
 	 * no iounmap() for that ioremap(); it would be a no-op, but it's
@@ -199,30 +226,39 @@ void __init dmi_scan_machine(void)
 		goto out;
 
 	for (q = p; q < p + 0x10000; q += 16) {
-		memcpy_fromio(buf, q, 15);
-		if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
-			u16 num = (buf[13] << 8) | buf[12];
-			u16 len = (buf[7] << 8) | buf[6];
-			u32 base = (buf[11] << 24) | (buf[10] << 16) |
-				   (buf[9] << 8) | buf[8];
-
-			/*
-			 * DMI version 0.0 means that the real version is taken from
-			 * the SMBIOS version, which we don't know at this point.
-			 */
-			if (buf[14] != 0)
-				printk(KERN_INFO "DMI %d.%d present.\n",
-					buf[14] >> 4, buf[14] & 0xF);
-			else
-				printk(KERN_INFO "DMI present.\n");
-
-			if (dmi_table(base,len, num, dmi_decode) == 0)
-				return;
-		}
+		rc = dmi_present(q);
+		if (!rc)
+			return;
 	}
+ out:	printk(KERN_INFO "DMI not present or invalid.\n");
+}
 
-out:	printk(KERN_INFO "DMI not present or invalid.\n");
+#else /* CONFIG_EFI */
+/* This is called as a core_initcall() because it isn't needed
+ * during early boot.  This also means we can iounmap the space
+ * when we're done with it.
+ */
+void __init dmi_scan_machine(void)
+{
+	char __iomem *p;
+	int rc;
+
+	if (!efi.smbios)
+		goto out;
+
+	p = ioremap((unsigned long)efi.smbios, 0x10000);
+	if (p == NULL)
+		goto out;
+
+	rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
+	iounmap(p);
+	if (!rc)
+		return;
+
+ out:	printk(KERN_INFO "DMI not present or invalid.\n");
 }
+
+#endif /* CONFIG_EFI */
 
 
 /**
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 199eeaf..51ac4e0 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -42,6 +42,10 @@ config TIME_INTERPOLATION
 	bool
 	default y
 
+config DMI
+	bool
+	default y
+
 config EFI
 	bool
 	default y
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 307514f..6fc59ed 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y	:= head.o init_task.o vmlinux.ld
 obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o
+	 unwind.o mca.o mca_asm.o topology.o dmi_scan.o
 
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
@@ -25,6 +25,7 @@ obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_r
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
+dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5add0bc..03e0c60 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -43,6 +43,7 @@
 #include <linux/initrd.h>
 #include <linux/platform.h>
 #include <linux/pm.h>
+#include <linux/dmi.h>
 
 #include <asm/ia32.h>
 #include <asm/machvec.h>
@@ -870,3 +871,10 @@ check_bugs (void)
 	ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles,
 			       (unsigned long) __end___mckinley_e9_bundles);
 }
+
+static int __init run_dmi_scan(void)
+{
+	dmi_scan_machine();
+	return 0;
+}
+core_initcall(run_dmi_scan);
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
index cf772a6..54f7457 100644
--- a/include/asm-ia64/io.h
+++ b/include/asm-ia64/io.h
@@ -434,6 +434,11 @@ iounmap (volatile void __iomem *addr)
 
 #define ioremap_nocache(o,s)	ioremap(o,s)
 
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
 # ifdef __KERNEL__
 
 /*

[PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Matt Domsch]

Enable DMI table parsing on ia64.

This consolidates the two dmi_scan_machine() functions of the previous
version of the patch into one function, and eliminates the #ifdef
CONFIG_EFI test, as suggested by Matt Tolentino.

Andi Kleen has a patch in his x86_64 tree which enables the use of
i386 dmi_scan.c on x86_64.  dmi_scan.c functions are being used by the
drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or
memory spaces where the IPMI controllers may be found.
 
This patch adds equivalent changes for ia64 as to what is in the
x86_64 tree.  In addition, I reworked the DMI detection, such that on
EFI-capable systems, it uses the efi.smbios pointer to find the table,
rather than brute-force searching from 0xF0000.  On non-EFI systems,
it continues the brute-force search.

My test system, an Intel S870BN4 'Tiger4', aka Dell PowerEdge 7250,
with latest BIOS, does not list the IPMI controller in the ACPI
namespace, nor does it have an ACPI SPMI table.  Also note, currently
shipping Dell x8xx EM64T servers don't have these either, so DMI is
the only method for obtaining the address of the IPMI controller.

Tested on ia64 with 2.6.15, plus the 'dmi' patch from
ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt which Andi has queued for
submission for 2.6.16, plus a patch to ipmi_si_intf.c which will
follow separately.

 
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c
index 6a93d75..2764eab 100644
--- a/arch/i386/kernel/dmi_scan.c
+++ b/arch/i386/kernel/dmi_scan.c
@@ -5,6 +5,7 @@
 #include <linux/dmi.h>
 #include <linux/bootmem.h>
 #include <linux/slab.h>
+#include <linux/efi.h>
 
 static char * __init dmi_string(struct dmi_header *dm, u8 s)
 {
@@ -184,46 +185,71 @@ static void __init dmi_decode(struct dmi
 	}
 }
 
-void __init dmi_scan_machine(void)
+static int __init dmi_present(char __iomem *p)
 {
 	u8 buf[15];
-	char __iomem *p, *q;
+	memcpy_fromio(buf, p, 15);
+	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+		u16 num = (buf[13] << 8) | buf[12];
+		u16 len = (buf[7] << 8) | buf[6];
+		u32 base = (buf[11] << 24) | (buf[10] << 16) |
+			(buf[9] << 8) | buf[8];
 
-	/*
-	 * no iounmap() for that ioremap(); it would be a no-op, but it's
-	 * so early in setup that sucker gets confused into doing what
-	 * it shouldn't if we actually call it.
-	 */
-	p = ioremap(0xF0000, 0x10000);
-	if (p == NULL)
-		goto out;
+		/*
+		 * DMI version 0.0 means that the real version is taken from
+		 * the SMBIOS version, which we don't know at this point.
+		 */
+		if (buf[14] != 0)
+			printk(KERN_INFO "DMI %d.%d present.\n",
+			       buf[14] >> 4, buf[14] & 0xF);
+		else
+			printk(KERN_INFO "DMI present.\n");
+		if (dmi_table(base,len, num, dmi_decode) == 0)
+			return 0;
+	}
+	return 1;
+}
 
-	for (q = p; q < p + 0x10000; q += 16) {
-		memcpy_fromio(buf, q, 15);
-		if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
-			u16 num = (buf[13] << 8) | buf[12];
-			u16 len = (buf[7] << 8) | buf[6];
-			u32 base = (buf[11] << 24) | (buf[10] << 16) |
-				   (buf[9] << 8) | buf[8];
-
-			/*
-			 * DMI version 0.0 means that the real version is taken from
-			 * the SMBIOS version, which we don't know at this point.
-			 */
-			if (buf[14] != 0)
-				printk(KERN_INFO "DMI %d.%d present.\n",
-					buf[14] >> 4, buf[14] & 0xF);
-			else
-				printk(KERN_INFO "DMI present.\n");
+void __init dmi_scan_machine(void)
+{
+	char __iomem *p, *q;
+	int rc;
 
-			if (dmi_table(base,len, num, dmi_decode) == 0)
+	if (efi_enabled) {
+		if (!efi.smbios)
+			goto out;
+
+               /* This is called as a core_initcall() because it isn't
+                * needed during early boot.  This also means we can
+                * iounmap the space when we're done with it.
+		*/
+		p = ioremap((unsigned long)efi.smbios, 0x10000);
+		if (p == NULL)
+			goto out;
+
+		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
+		iounmap(p);
+		if (!rc)
+			return;
+	}
+	else {
+		/*
+		 * no iounmap() for that ioremap(); it would be a no-op, but it's
+		 * so early in setup that sucker gets confused into doing what
+		 * it shouldn't if we actually call it.
+		 */
+		p = ioremap(0xF0000, 0x10000);
+		if (p == NULL)
+			goto out;
+
+		for (q = p; q < p + 0x10000; q += 16) {
+			rc = dmi_present(q);
+			if (!rc)
 				return;
 		}
 	}
-
-out:	printk(KERN_INFO "DMI not present or invalid.\n");
+ out:	printk(KERN_INFO "DMI not present or invalid.\n");
 }
-
 
 /**
  *	dmi_check_system - check system DMI data
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 199eeaf..51ac4e0 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -42,6 +42,10 @@ config TIME_INTERPOLATION
 	bool
 	default y
 
+config DMI
+	bool
+	default y
+
 config EFI
 	bool
 	default y
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 307514f..6fc59ed 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y	:= head.o init_task.o vmlinux.ld
 obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o
+	 unwind.o mca.o mca_asm.o topology.o dmi_scan.o
 
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
@@ -25,6 +25,7 @@ obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_r
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
+dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5add0bc..03e0c60 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -43,6 +43,7 @@
 #include <linux/initrd.h>
 #include <linux/platform.h>
 #include <linux/pm.h>
+#include <linux/dmi.h>
 
 #include <asm/ia32.h>
 #include <asm/machvec.h>
@@ -870,3 +871,10 @@ check_bugs (void)
 	ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles,
 			       (unsigned long) __end___mckinley_e9_bundles);
 }
+
+static int __init run_dmi_scan(void)
+{
+	dmi_scan_machine();
+	return 0;
+}
+core_initcall(run_dmi_scan);
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
index cf772a6..54f7457 100644
--- a/include/asm-ia64/io.h
+++ b/include/asm-ia64/io.h
@@ -434,6 +434,11 @@ iounmap (volatile void __iomem *addr)
 
 #define ioremap_nocache(o,s)	ioremap(o,s)
 
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
 # ifdef __KERNEL__
 
 /*

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Friday 06 January 2006 15:39, Matt Domsch wrote:
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> ...
> +config DMI
> +       bool
> +       default y

Should we have a way to turn this off?

> diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
> ...
> +dmi_scan-y                     += ../../i386/kernel/dmi_scan.o

Ugh.  I really hate this sort of sharing.  Could dmi_scan.c go in
drivers/firmware/ or something instead?

> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
> ...
> +static int __init run_dmi_scan(void)
> +{
> +       dmi_scan_machine();
> +       return 0;
> +}
> +core_initcall(run_dmi_scan);

Shouldn't this be wrapped in "#ifdef CONFIG_DMI"?

Sorry this feedback is so late.  I only looked at it because the
DMI stuff crashes HP sx2000 (and probably sx1000) boxes, probably
because of some memory attribute problem.  So I'll have more
feedback after I debug that ;-)

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Alan Cox]

> Ugh.  I really hate this sort of sharing.  Could dmi_scan.c go in
> drivers/firmware/ or something instead?

Not unreasonable. The DMI standard for the tables isn't specifically an
x86 thing but drawn mostly from the management group stuff. The arch
specific stuff is whether you scan for a table or ask the EFIng firmware

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Andi Kleen]

On Saturday 14 January 2006 01:24, Bjorn Helgaas wrote:
> On Friday 06 January 2006 15:39, Matt Domsch wrote:
> > diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> > ...
> > +config DMI
> > +       bool
> > +       default y
>
> Should we have a way to turn this off?

At least on i386/x86-64 it is largely used for hardware/firmware bug 
workaround and these have been traditionally always compiled in

Or do you want to spend a lot of time on a bug report from
a user only to discover they didn't enable the workarounds for
their particular platform?

You might not need that right now but I can predict that 
at some point you'll need board specific workarounds - and
then it will be very useful to have.

>
> > diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
> > ...
> > +dmi_scan-y                     += ../../i386/kernel/dmi_scan.o
>
> Ugh.  I really hate this sort of sharing.  Could dmi_scan.c go in
> drivers/firmware/ or something instead?

Well, i suppose it will be more common in the future. Perhaps
get over that particular hatered?

-Andi

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Friday 13 January 2006 18:19, Andi Kleen wrote:
> On Saturday 14 January 2006 01:24, Bjorn Helgaas wrote:
> > On Friday 06 January 2006 15:39, Matt Domsch wrote:
> > > diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> > > ...
> > > +config DMI
> > > +       bool
> > > +       default y
> >
> > Should we have a way to turn this off?
> 
> At least on i386/x86-64 it is largely used for hardware/firmware bug 
> workaround and these have been traditionally always compiled in
> 
> Or do you want to spend a lot of time on a bug report from
> a user only to discover they didn't enable the workarounds for
> their particular platform?

Yeah, that was a dumb idea.  I just need to fix whatever's
currently broken and then there'll be no harm in having it
all the time.

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Friday 13 January 2006 17:24, Bjorn Helgaas wrote:
> ... the
> DMI stuff crashes HP sx2000 (and probably sx1000) boxes, probably
> because of some memory attribute problem.  So I'll have more
> feedback after I debug that ;-)

It *is* a memory attribute problem.  The current code always calls
ioremap() on efi.smbios.  The first problem is that this is a
physical address on x86, but a virtual address on ia64.

The second problem is that we don't check the supported attributes
for the SMBIOS table.  On HP sx1000/sx2000, these tables are in system
memory, which doesn't support uncacheable access, so ioremap() does
the wrong thing.

The patch below addresses both problems (but I can't test the x86 EFI
change).  I don't really like it, because the memory attribute checking
is not complete (it only checks the first page, not the whole range),
and there's already very similar code in acpi_os_map_memory(),
acpi_os_read_memory(), acpi_os_write_memory(), and efi_range_is_wc().

But it's a start, and maybe the consolidation could be done later.

Index: work-mm3/arch/i386/kernel/dmi_scan.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/dmi_scan.c	2006-01-17 15:18:42.000000000 -0700
+++ work-mm3/arch/i386/kernel/dmi_scan.c	2006-01-17 16:58:11.000000000 -0700
@@ -39,9 +39,18 @@
 			    void (*decode)(struct dmi_header *))
 {
 	u8 *buf, *data;
-	int i = 0;
+	int iomem = 1, i = 0;
 		
-	buf = dmi_ioremap(base, len);
+	if (efi_enabled) {
+		if (efi_mem_attributes(base & EFI_MEMORY_WB)) {
+			iomem = 0;
+			buf = (u8 *) phys_to_virt(base);
+		} else if (efi_mem_attributes(base & EFI_MEMORY_UC))
+			buf = dmi_ioremap(base, len);
+		else
+			buf = NULL;
+	} else
+		buf = dmi_ioremap(base, len);
 	if (buf == NULL)
 		return -1;
 
@@ -66,7 +75,8 @@
 		data += 2;
 		i++;
 	}
-	dmi_iounmap(buf, len);
+	if (iomem)
+		dmi_iounmap(buf, len);
 	return 0;
 }
 
@@ -216,19 +226,30 @@
 	int rc;
 
 	if (efi_enabled) {
-		if (!efi.smbios)
+		unsigned long phys_addr = __pa(efi.smbios);
+		int iomem = 0;
+
+		if (!phys_addr)
 			goto out;
 
                /* This is called as a core_initcall() because it isn't
                 * needed during early boot.  This also means we can
                 * iounmap the space when we're done with it.
 		*/
-		p = ioremap((unsigned long)efi.smbios, 0x10000);
+		if (efi_mem_attributes(phys_addr & EFI_MEMORY_WB))
+			p = (char *) phys_to_virt(phys_addr);
+		else if (efi_mem_attributes(phys_addr & EFI_MEMORY_UC)) {
+			iomem = 1;
+			p = ioremap(phys_addr, 0x10000);
+		} else
+			p = NULL;
+
 		if (p == NULL)
 			goto out;
 
 		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
-		iounmap(p);
+		if (iomem)
+			iounmap(p);
 		if (!rc)
 			return;
 	}
Index: work-mm3/arch/i386/kernel/efi.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/efi.c	2005-10-27 18:02:08.000000000 -0600
+++ work-mm3/arch/i386/kernel/efi.c	2006-01-17 17:10:20.000000000 -0700
@@ -391,7 +391,7 @@
 			printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
-			efi.smbios = (void *) config_tables[i].table;
+			efi.smbios = __va(config_tables[i].table);
 			printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Andi Kleen]

On Wednesday 18 January 2006 01:17, Bjorn Helgaas wrote:
> On Friday 13 January 2006 17:24, Bjorn Helgaas wrote:
> > ... the
> > DMI stuff crashes HP sx2000 (and probably sx1000) boxes, probably
> > because of some memory attribute problem.  So I'll have more
> > feedback after I debug that ;-)
>
> It *is* a memory attribute problem.  The current code always calls
> ioremap() on efi.smbios.  The first problem is that this is a
> physical address on x86, but a virtual address on ia64.
>
> The second problem is that we don't check the supported attributes
> for the SMBIOS table.  On HP sx1000/sx2000, these tables are in system
> memory, which doesn't support uncacheable access, so iorem
> ap() does the wrong thing.

At least on x86-64/i386 the ioremap is actually cached unless a MTRR
changes it, but it normally doesn't here. If one wants to force uncached
access one has to use ioremap_uncached(). You're saying IA64 ioremap
forces uncached access? That seems weird.

> +	if (efi_enabled) {
> +		if (efi_mem_attributes(base & EFI_MEMORY_WB)) {
> +			iomem = 0;
> +			buf = (u8 *) phys_to_virt(base);
> +		} else if (efi_mem_attributes(base & EFI_MEMORY_UC))
> +			buf = dmi_ioremap(base, len);
> +		else
> +			buf = NULL;

I would expect your ioremap to already do such a lookup. That is at least
how MTRRs on i386/x86-64 work.  If it does not how about you fix
ioremap()? Or provide a suitable ia64 dmi_ioremap, but it's likely
better to do it generally.

Regarding physical vs virtual efi.smbios -- it sounds nasty to have such
a difference in the EFI support for different architectures. Matthew, do
you have a suggestion how this can be unified?

-Andi

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Tuesday 17 January 2006 19:32, Andi Kleen wrote:
> At least on x86-64/i386 the ioremap is actually cached unless a MTRR
> changes it, but it normally doesn't here. If one wants to force uncached
> access one has to use ioremap_uncached(). You're saying IA64 ioremap
> forces uncached access? That seems weird.

Right.  On ia64, ioremap() and ioremap_nocache() are the same.  You'd
have to ask David about the history behind this.

> > +	if (efi_enabled) {
> > +		if (efi_mem_attributes(base & EFI_MEMORY_WB)) {
> > +			iomem = 0;
> > +			buf = (u8 *) phys_to_virt(base);
> > +		} else if (efi_mem_attributes(base & EFI_MEMORY_UC))
> > +			buf = dmi_ioremap(base, len);
> > +		else
> > +			buf = NULL;
> 
> I would expect your ioremap to already do such a lookup. That is at least
> how MTRRs on i386/x86-64 work.  If it does not how about you fix
> ioremap()?

Yes, hiding this all inside ioremap() is probably a good idea.
It'll slow it down a lot, but I guess it's probably not used in
performance paths anyway.  Thanks for the advice.

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Bjorn Helgaas]

On Tuesday 17 January 2006 17:17, Bjorn Helgaas wrote:
>> But it's a start, and maybe the consolidation could be done later.
> 
> Index: work-mm3/arch/i386/kernel/dmi_scan.c
> ===================================================================
> --- work-mm3.orig/arch/i386/kernel/dmi_scan.c	2006-01-17 15:18:42.000000000 -0700
> +++ work-mm3/arch/i386/kernel/dmi_scan.c	2006-01-17 16:58:11.000000000 -0700
> @@ -39,9 +39,18 @@
>  			    void (*decode)(struct dmi_header *))
>  {
>  	u8 *buf, *data;
> -	int i = 0;
> +	int iomem = 1, i = 0;
>  		
> -	buf = dmi_ioremap(base, len);
> +	if (efi_enabled) {
> +		if (efi_mem_attributes(base & EFI_MEMORY_WB)) {

Ouch, ignore this patch if you haven't already.  The above is
parenthesized wrong.

Matt, what's your opinion on proceeding?  I know you want to get
the DMI stuff in distros.  I'm looking at reworking ioremap to
hide all this stuff, but that'll be a bigger change and may be
harder to get into distro releases.

For upstream, the ioremap rework sounds like the way to go, but
I don't know which the distros would prefer for updates.

Re: [Openipmi-developer] Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Wed, Jan 18, 2006 at 10:29:46AM -0700, Bjorn Helgaas wrote:
> Matt, what's your opinion on proceeding?  I know you want to get
> the DMI stuff in distros.  I'm looking at reworking ioremap to
> hide all this stuff, but that'll be a bigger change and may be
> harder to get into distro releases.
> 
> For upstream, the ioremap rework sounds like the way to go, but
> I don't know which the distros would prefer for updates.

Existing distros (RHEL3, RHEL4, SLES9, ..) don't have a huge problem
because my target user - the ipmi driver - does its own DMI scanning
on those distros still.  Ugly, but works.  So the only concern is
SLES10 and RHEL5, both of which are still rebasing to upstream best as
I can tell from their publicly posted kernels.  So if it can be done
"right" in 2.6.16-rc, let's do that.  If it will be intrusive, and
after 2.6.16 is out, than a minimally intrusive but working patch for
2.6.16-rc would be preferred.

Thanks!
Matt

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

[PATCH 0/5] ia64 ioremap, DMI, EFI system table

[Bjorn Helgaas]

OK, here's a set of patches to (hopefully) clean up this area
a bit:

1  Simplify efi_mem_attribute_range() so I can use it both for
   /dev/mem validation and ioremap() attribute checking.

2  Make ia64 ioremap() check memory attributes, so it works for
   plain memory that only supports write-back access, as well as
   for MMIO space that only supports uncacheable access.

3  DMI ioremaps too much space, which makes it fail on machines
   where the SMBIOS table is near the end of a memory region.

4  Keep EFI table addresses as physical, not virtual.  The SMBIOS
   address was physical on x86 but virtual on ia64, which broke
   dmi_scan_machine().

5  Use smarter ioremap() implementation to remove some cruft in
   acpi_os_{read,write,map}_memory().  This one's just an optional
   cleanup; I don't think it fixes any bugs.

[PATCH 1/5] EFI, /dev/mem: simplify efi_mem_attribute_range()

[Bjorn Helgaas]

Pass the size, not a pointer to the size, to efi_mem_attribute_range().

This function validates memory regions for the /dev/mem read/write/mmap
paths.  The pointer allows arches to reduce the size of the range, but
I think that's unnecessary complexity.  Simplifying it will let me use
efi_mem_attribute_range() to improve the ia64 ioremap() implementation.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work-mm3/arch/ia64/kernel/efi.c
===================================================================
--- work-mm3.orig/arch/ia64/kernel/efi.c	2006-01-18 13:25:29.000000000 -0700
+++ work-mm3/arch/ia64/kernel/efi.c	2006-01-18 13:27:18.000000000 -0700
@@ -685,27 +685,34 @@
 /*
  * Determines whether the memory at phys_addr supports the desired
  * attribute (WB, UC, etc).  If this returns 1, the caller can safely
- * access *size bytes at phys_addr with the specified attribute.
+ * access size bytes at phys_addr with the specified attribute.
  */
-static int
-efi_mem_attribute_range (unsigned long phys_addr, unsigned long *size, u64 attr)
+int
+efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, u64 attr)
 {
+	unsigned long end = phys_addr + size;
 	efi_memory_desc_t *md = efi_memory_descriptor(phys_addr);
-	unsigned long md_end;
 
-	if (!md || (md->attribute & attr) != attr)
+	/*
+	 * Some firmware doesn't report MMIO regions in the EFI memory
+	 * map.  The Intel BigSur (a.k.a. HP i2000) has this problem.
+	 * On those platforms, we have to assume UC is valid everywhere.
+	 */
+	if (!md || (md->attribute & attr) != attr) {
+		if (attr == EFI_MEMORY_UC && !efi_memmap_has_mmio())
+			return 1;
 		return 0;
+	}
 
 	do {
-		md_end = efi_md_end(md);
-		if (phys_addr + *size <= md_end)
+		unsigned long md_end = efi_md_end(md);
+
+		if (end <= md_end)
 			return 1;
 
 		md = efi_memory_descriptor(md_end);
-		if (!md || (md->attribute & attr) != attr) {
-			*size = md_end - phys_addr;
-			return 1;
-		}
+		if (!md || (md->attribute & attr) != attr)
+			return 0;
 	} while (md);
 	return 0;
 }
@@ -716,7 +723,7 @@
  * control access size.
  */
 int
-valid_phys_addr_range (unsigned long phys_addr, unsigned long *size)
+valid_phys_addr_range (unsigned long phys_addr, unsigned long size)
 {
 	return efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB);
 }
@@ -731,7 +738,7 @@
  * because that doesn't appear in the boot-time EFI memory map.
  */
 int
-valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size)
+valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size)
 {
 	if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB))
 		return 1;
@@ -739,14 +746,6 @@
 	if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_UC))
 		return 1;
 
-	/*
-	 * Some firmware doesn't report MMIO regions in the EFI memory map.
-	 * The Intel BigSur (a.k.a. HP i2000) has this problem.  In this
-	 * case, we can't use the EFI memory map to validate mmap requests.
-	 */
-	if (!efi_memmap_has_mmio())
-		return 1;
-
 	return 0;
 }
 
Index: work-mm3/drivers/char/mem.c
===================================================================
--- work-mm3.orig/drivers/char/mem.c	2006-01-18 13:25:27.000000000 -0700
+++ work-mm3/drivers/char/mem.c	2006-01-18 13:27:18.000000000 -0700
@@ -88,21 +88,15 @@
 }
 
 #ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
-static inline int valid_phys_addr_range(unsigned long addr, size_t *count)
+static inline int valid_phys_addr_range(unsigned long addr, size_t count)
 {
-	unsigned long end_mem;
-
-	end_mem = __pa(high_memory);
-	if (addr >= end_mem)
+	if (addr + count > __pa(high_memory))
 		return 0;
 
-	if (*count > end_mem - addr)
-		*count = end_mem - addr;
-
 	return 1;
 }
 
-static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t *size)
+static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t size)
 {
 	return 1;
 }
@@ -119,7 +113,7 @@
 	ssize_t read, sz;
 	char *ptr;
 
-	if (!valid_phys_addr_range(p, &count))
+	if (!valid_phys_addr_range(p, count))
 		return -EFAULT;
 	read = 0;
 #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
@@ -177,7 +171,7 @@
 	unsigned long copied;
 	void *ptr;
 
-	if (!valid_phys_addr_range(p, &count))
+	if (!valid_phys_addr_range(p, count))
 		return -EFAULT;
 
 	written = 0;
@@ -251,7 +245,7 @@
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, &size))
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
 		return -EINVAL;
 
 	vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
Index: work-mm3/include/asm-ia64/io.h
===================================================================
--- work-mm3.orig/include/asm-ia64/io.h	2006-01-18 13:25:27.000000000 -0700
+++ work-mm3/include/asm-ia64/io.h	2006-01-18 13:27:18.000000000 -0700
@@ -88,8 +88,8 @@
 }
 
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range (unsigned long addr, size_t *count); /* efi.c */
-extern int valid_mmap_phys_addr_range (unsigned long addr, size_t *count);
+extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_mmap_phys_addr_range (unsigned long addr, size_t count);
 
 /*
  * The following two macros are deprecated and scheduled for removal.
Index: work-mm3/include/linux/efi.h
===================================================================
--- work-mm3.orig/include/linux/efi.h	2006-01-18 13:25:27.000000000 -0700
+++ work-mm3/include/linux/efi.h	2006-01-18 13:27:18.000000000 -0700
@@ -292,6 +292,8 @@
 extern u64 efi_get_iobase (void);
 extern u32 efi_mem_type (unsigned long phys_addr);
 extern u64 efi_mem_attributes (unsigned long phys_addr);
+extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size,
+				    u64 attr);
 extern int __init efi_uart_console_only (void);
 extern void efi_initialize_iomem_resources(struct resource *code_resource,
 					struct resource *data_resource);

[PATCH 2/5] ia64: ioremap: check EFI for valid memory attributes

[Bjorn Helgaas]

Check the EFI memory map so we can use the correct memory attributes
for ioremap().  Previously, we always used uncacheable access, which
blows up on some machines for regular system memory.

Depends on the previous efi_mem_attribute_range() patch.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work-mm3/arch/ia64/mm/ioremap.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ work-mm3/arch/ia64/mm/ioremap.c	2006-01-18 17:04:42.000000000 -0700
@@ -0,0 +1,40 @@
+/*
+ * (c) Copyright 2006 Hewlett-Packard Development Company, L.P.
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/efi.h>
+#include <asm/io.h>
+
+static inline void __iomem *
+__ioremap (unsigned long offset, unsigned long size)
+{
+	return (void __iomem *) (__IA64_UNCACHED_OFFSET | offset);
+}
+
+void __iomem *
+ioremap (unsigned long offset, unsigned long size)
+{
+	if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC))
+		return __ioremap(offset, size);
+
+	if (efi_mem_attribute_range(offset, size, EFI_MEMORY_WB))
+		return phys_to_virt(offset);
+
+	/*
+	 * Someday this should check ACPI resources so we
+	 * can do the right thing for hot-plugged regions.
+	 */
+	return __ioremap(offset, size);
+}
+
+void __iomem *
+ioremap_nocache (unsigned long offset, unsigned long size)
+{
+	return __ioremap(offset, size);
+}
Index: work-mm3/include/asm-ia64/io.h
===================================================================
--- work-mm3.orig/include/asm-ia64/io.h	2006-01-18 13:33:06.000000000 -0700
+++ work-mm3/include/asm-ia64/io.h	2006-01-18 16:50:54.000000000 -0700
@@ -416,25 +416,14 @@
 # define outl_p		outl
 #endif
 
-/*
- * An "address" in IO memory space is not clearly either an integer or a pointer. We will
- * accept both, thus the casts.
- *
- * On ia-64, we access the physical I/O memory space through the uncached kernel region.
- */
-static inline void __iomem *
-ioremap (unsigned long offset, unsigned long size)
-{
-	return (void __iomem *) (__IA64_UNCACHED_OFFSET | (offset));
-}
+extern void __iomem * ioremap(unsigned long offset, unsigned long size);
+extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 
 static inline void
 iounmap (volatile void __iomem *addr)
 {
 }
 
-#define ioremap_nocache(o,s)	ioremap(o,s)
-
 /* Use normal IO mappings for DMI */
 #define dmi_ioremap ioremap
 #define dmi_iounmap(x,l) iounmap(x)
Index: work-mm3/arch/ia64/mm/Makefile
===================================================================
--- work-mm3.orig/arch/ia64/mm/Makefile	2006-01-18 13:33:06.000000000 -0700
+++ work-mm3/arch/ia64/mm/Makefile	2006-01-18 13:33:34.000000000 -0700
@@ -2,7 +2,7 @@
 # Makefile for the ia64-specific parts of the memory manager.
 #
 
-obj-y := init.o fault.o tlb.o extable.o
+obj-y := init.o fault.o tlb.o extable.o ioremap.o
 
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
 obj-$(CONFIG_NUMA)	   += numa.o

[PATCH 3/5] DMI: only ioremap stuff we actually need

[Bjorn Helgaas]

dmi_scan_machine() tries to ioremap 0x10000 (64K) bytes, even though
it only looks at the first 32 bytes or so.  If the SMBIOS table is
near the end of a memory region, the ioremap() may fail when it
shouldn't.

This is in the efi_enabled path, so it really only affects ia64 at
the moment.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work-mm3/arch/i386/kernel/dmi_scan.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/dmi_scan.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/i386/kernel/dmi_scan.c	2006-01-19 11:30:21.000000000 -0700
@@ -223,7 +223,7 @@
                 * needed during early boot.  This also means we can
                 * iounmap the space when we're done with it.
 		*/
-		p = ioremap((unsigned long)efi.smbios, 0x10000);
+		p = ioremap((unsigned long)efi.smbios, 32);
 		if (p == NULL)
 			goto out;
 

[PATCH 4/5] EFI: keep physical table addresses in efi structure

[Bjorn Helgaas]

Almost all users of the table addresses from the EFI system table
want physical addresses.  So rather than doing the pa->va->pa
conversion, just keep physical addresses in struct efi.

This fixes a DMI bug: the efi structure contained the physical SMBIOS
address on x86 but the virtual address on ia64, so dmi_scan_machine()
used ioremap() on a virtual address on ia64.

This is essentially the same as an earlier patch by Matt Tolentino:
    http://marc.theaimsgroup.com/?l=linux-kernel&m=112130292316281&w=2
except that this changes all table addresses, not just ACPI addresses.

Matt's original patch was backed out because it caused MCAs on HP sx1000
systems.  That problem is resolved by the ioremap() attribute checking
added for ia64.

Depends on the previous ia64 ioremap patch.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work-mm3/arch/i386/kernel/efi.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/efi.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/i386/kernel/efi.c	2006-01-19 11:37:23.000000000 -0700
@@ -377,29 +377,38 @@
 	if (config_tables == NULL)
 		printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n");
 
+	efi.mps        = EFI_INVALID_TABLE_ADDR;
+	efi.acpi       = EFI_INVALID_TABLE_ADDR;
+	efi.acpi20     = EFI_INVALID_TABLE_ADDR;
+	efi.smbios     = EFI_INVALID_TABLE_ADDR;
+	efi.sal_systab = EFI_INVALID_TABLE_ADDR;
+	efi.boot_info  = EFI_INVALID_TABLE_ADDR;
+	efi.hcdp       = EFI_INVALID_TABLE_ADDR;
+	efi.uga        = EFI_INVALID_TABLE_ADDR;
+
 	for (i = 0; i < num_config_tables; i++) {
 		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
-			efi.mps = (void *)config_tables[i].table;
+			efi.mps = config_tables[i].table;
 			printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) {
-			efi.acpi20 = __va(config_tables[i].table);
+			efi.acpi20 = config_tables[i].table;
 			printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) {
-			efi.acpi = __va(config_tables[i].table);
+			efi.acpi = config_tables[i].table;
 			printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
-			efi.smbios = (void *) config_tables[i].table;
+			efi.smbios = config_tables[i].table;
 			printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
-			efi.hcdp = (void *)config_tables[i].table;
+			efi.hcdp = config_tables[i].table;
 			printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table);
 		} else
 		    if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) {
-			efi.uga = (void *)config_tables[i].table;
+			efi.uga = config_tables[i].table;
 			printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table);
 		}
 	}
Index: work-mm3/arch/ia64/kernel/efi.c
===================================================================
--- work-mm3.orig/arch/ia64/kernel/efi.c	2006-01-19 11:36:52.000000000 -0700
+++ work-mm3/arch/ia64/kernel/efi.c	2006-01-19 11:37:23.000000000 -0700
@@ -466,24 +466,33 @@
 	printk(KERN_INFO "EFI v%u.%.02u by %s:",
 	       efi.systab->hdr.revision >> 16, efi.systab->hdr.revision & 0xffff, vendor);
 
+	efi.mps        = EFI_INVALID_TABLE_ADDR;
+	efi.acpi       = EFI_INVALID_TABLE_ADDR;
+	efi.acpi20     = EFI_INVALID_TABLE_ADDR;
+	efi.smbios     = EFI_INVALID_TABLE_ADDR;
+	efi.sal_systab = EFI_INVALID_TABLE_ADDR;
+	efi.boot_info  = EFI_INVALID_TABLE_ADDR;
+	efi.hcdp       = EFI_INVALID_TABLE_ADDR;
+	efi.uga        = EFI_INVALID_TABLE_ADDR;
+
 	for (i = 0; i < (int) efi.systab->nr_tables; i++) {
 		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
-			efi.mps = __va(config_tables[i].table);
+			efi.mps = config_tables[i].table;
 			printk(" MPS=0x%lx", config_tables[i].table);
 		} else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) {
-			efi.acpi20 = __va(config_tables[i].table);
+			efi.acpi20 = config_tables[i].table;
 			printk(" ACPI 2.0=0x%lx", config_tables[i].table);
 		} else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) {
-			efi.acpi = __va(config_tables[i].table);
+			efi.acpi = config_tables[i].table;
 			printk(" ACPI=0x%lx", config_tables[i].table);
 		} else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
-			efi.smbios = __va(config_tables[i].table);
+			efi.smbios = config_tables[i].table;
 			printk(" SMBIOS=0x%lx", config_tables[i].table);
 		} else if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) == 0) {
-			efi.sal_systab = __va(config_tables[i].table);
+			efi.sal_systab = config_tables[i].table;
 			printk(" SALsystab=0x%lx", config_tables[i].table);
 		} else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
-			efi.hcdp = __va(config_tables[i].table);
+			efi.hcdp = config_tables[i].table;
 			printk(" HCDP=0x%lx", config_tables[i].table);
 		}
 	}
Index: work-mm3/drivers/firmware/efivars.c
===================================================================
--- work-mm3.orig/drivers/firmware/efivars.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/drivers/firmware/efivars.c	2006-01-19 11:37:23.000000000 -0700
@@ -568,20 +568,20 @@
 	if (!entry || !buf)
 		return -EINVAL;
 
-	if (efi.mps)
-		str += sprintf(str, "MPS=0x%lx\n", __pa(efi.mps));
-	if (efi.acpi20)
-		str += sprintf(str, "ACPI20=0x%lx\n", __pa(efi.acpi20));
-	if (efi.acpi)
-		str += sprintf(str, "ACPI=0x%lx\n", __pa(efi.acpi));
-	if (efi.smbios)
-		str += sprintf(str, "SMBIOS=0x%lx\n", __pa(efi.smbios));
-	if (efi.hcdp)
-		str += sprintf(str, "HCDP=0x%lx\n", __pa(efi.hcdp));
-	if (efi.boot_info)
-		str += sprintf(str, "BOOTINFO=0x%lx\n", __pa(efi.boot_info));
-	if (efi.uga)
-		str += sprintf(str, "UGA=0x%lx\n", __pa(efi.uga));
+	if (efi.mps != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "MPS=0x%lx\n", efi.mps);
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI20=0x%lx\n", efi.acpi20);
+	if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
+	if (efi.smbios != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+	if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
+	if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "BOOTINFO=0x%lx\n", efi.boot_info);
+	if (efi.uga != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "UGA=0x%lx\n", efi.uga);
 
 	return str - buf;
 }
Index: work-mm3/include/linux/efi.h
===================================================================
--- work-mm3.orig/include/linux/efi.h	2006-01-19 11:28:43.000000000 -0700
+++ work-mm3/include/linux/efi.h	2006-01-19 11:37:23.000000000 -0700
@@ -240,19 +240,21 @@
 	unsigned long desc_size;
 };
 
+#define EFI_INVALID_TABLE_ADDR		(~0UL)
+
 /*
  * All runtime access to EFI goes through this structure:
  */
 extern struct efi {
 	efi_system_table_t *systab;	/* EFI system table */
-	void *mps;			/* MPS table */
-	void *acpi;			/* ACPI table  (IA64 ext 0.71) */
-	void *acpi20;			/* ACPI table  (ACPI 2.0) */
-	void *smbios;			/* SM BIOS table */
-	void *sal_systab;		/* SAL system table */
-	void *boot_info;		/* boot info table */
-	void *hcdp;			/* HCDP table */
-	void *uga;			/* UGA table */
+	unsigned long mps;		/* MPS table */
+	unsigned long acpi;		/* ACPI table  (IA64 ext 0.71) */
+	unsigned long acpi20;		/* ACPI table  (ACPI 2.0) */
+	unsigned long smbios;		/* SM BIOS table */
+	unsigned long sal_systab;	/* SAL system table */
+	unsigned long boot_info;	/* boot info table */
+	unsigned long hcdp;		/* HCDP table */
+	unsigned long uga;		/* UGA table */
 	efi_get_time_t *get_time;
 	efi_set_time_t *set_time;
 	efi_get_wakeup_time_t *get_wakeup_time;
Index: work-mm3/arch/i386/kernel/acpi/boot.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/acpi/boot.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/i386/kernel/acpi/boot.c	2006-01-19 11:37:23.000000000 -0700
@@ -659,10 +659,10 @@
 	unsigned long rsdp_phys = 0;
 
 	if (efi_enabled) {
-		if (efi.acpi20)
-			return __pa(efi.acpi20);
-		else if (efi.acpi)
-			return __pa(efi.acpi);
+		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+			return efi.acpi20;
+		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+			return efi.acpi;
 	}
 	/*
 	 * Scan memory looking for the RSDP signature. First search EBDA (low
Index: work-mm3/arch/ia64/kernel/acpi.c
===================================================================
--- work-mm3.orig/arch/ia64/kernel/acpi.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/ia64/kernel/acpi.c	2006-01-19 11:37:23.000000000 -0700
@@ -618,9 +618,9 @@
 {
 	unsigned long rsdp_phys = 0;
 
-	if (efi.acpi20)
-		rsdp_phys = __pa(efi.acpi20);
-	else if (efi.acpi)
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		rsdp_phys = efi.acpi20;
+	else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
 		printk(KERN_WARNING PREFIX
 		       "v1.0/r0.71 tables no longer supported\n");
 	return rsdp_phys;
Index: work-mm3/drivers/acpi/osl.c
===================================================================
--- work-mm3.orig/drivers/acpi/osl.c	2006-01-19 11:26:18.000000000 -0700
+++ work-mm3/drivers/acpi/osl.c	2006-01-19 11:37:23.000000000 -0700
@@ -156,12 +156,10 @@
 {
 	if (efi_enabled) {
 		addr->pointer_type = ACPI_PHYSICAL_POINTER;
-		if (efi.acpi20)
-			addr->pointer.physical =
-			    (acpi_physical_address) virt_to_phys(efi.acpi20);
-		else if (efi.acpi)
-			addr->pointer.physical =
-			    (acpi_physical_address) virt_to_phys(efi.acpi);
+		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+			addr->pointer.physical = efi.acpi20;
+		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+			addr->pointer.physical = efi.acpi;
 		else {
 			printk(KERN_ERR PREFIX
 			       "System description tables not found\n");
Index: work-mm3/arch/i386/kernel/dmi_scan.c
===================================================================
--- work-mm3.orig/arch/i386/kernel/dmi_scan.c	2006-01-19 11:37:04.000000000 -0700
+++ work-mm3/arch/i386/kernel/dmi_scan.c	2006-01-19 11:37:58.000000000 -0700
@@ -216,14 +216,14 @@
 	int rc;
 
 	if (efi_enabled) {
-		if (!efi.smbios)
+		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
 			goto out;
 
                /* This is called as a core_initcall() because it isn't
                 * needed during early boot.  This also means we can
                 * iounmap the space when we're done with it.
 		*/
-		p = ioremap((unsigned long)efi.smbios, 32);
+		p = ioremap(efi.smbios, 32);
 		if (p == NULL)
 			goto out;
 
Index: work-mm3/arch/ia64/kernel/setup.c
===================================================================
--- work-mm3.orig/arch/ia64/kernel/setup.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/ia64/kernel/setup.c	2006-01-19 11:37:23.000000000 -0700
@@ -444,7 +444,7 @@
 	find_memory();
 
 	/* process SAL system table: */
-	ia64_sal_init(efi.sal_systab);
+	ia64_sal_init(__va(efi.sal_systab));
 
 #ifdef CONFIG_SMP
 	cpu_physical_id(0) = hard_smp_processor_id();
Index: work-mm3/arch/ia64/sn/kernel/setup.c
===================================================================
--- work-mm3.orig/arch/ia64/sn/kernel/setup.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/arch/ia64/sn/kernel/setup.c	2006-01-19 11:37:23.000000000 -0700
@@ -339,10 +339,11 @@
 	struct pcdp_interface_pci if_pci;
 	extern struct efi efi;
 
-	pcdp = efi.hcdp;
-	if (! pcdp)
+	if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
 		return;		/* no hcdp/pcdp table */
 
+	pcdp = __va(efi.hcdp);
+
 	if (pcdp->rev < 3)
 		return;		/* only support PCDP (rev >= 3) */
 
Index: work-mm3/drivers/firmware/pcdp.c
===================================================================
--- work-mm3.orig/drivers/firmware/pcdp.c	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/drivers/firmware/pcdp.c	2006-01-19 11:37:23.000000000 -0700
@@ -89,19 +89,20 @@
 	struct pcdp_uart *uart;
 	struct pcdp_device *dev, *end;
 	int i, serial = 0;
+	int rc = -ENODEV;
 
-	pcdp = efi.hcdp;
-	if (!pcdp)
+	if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
 		return -ENODEV;
 
-	printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, __pa(pcdp));
+	pcdp = ioremap(efi.hcdp, 4096);
+	printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp);
 
 	if (strstr(cmdline, "console=hcdp")) {
 		if (pcdp->rev < 3)
 			serial = 1;
 	} else if (strstr(cmdline, "console=")) {
 		printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
-		return -ENODEV;
+		goto out;
 	}
 
 	if (pcdp->rev < 3 && efi_uart_console_only())
@@ -110,7 +111,8 @@
 	for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
 		if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
 			if (uart->type == PCDP_CONSOLE_UART) {
-				return setup_serial_console(uart);
+				rc = setup_serial_console(uart);
+				goto out;
 			}
 		}
 	}
@@ -121,10 +123,13 @@
 	     dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
 		if (dev->flags & PCDP_PRIMARY_CONSOLE) {
 			if (dev->type == PCDP_CONSOLE_VGA) {
-				return setup_vga_console(dev);
+				rc = setup_vga_console(dev);
+				goto out;
 			}
 		}
 	}
 
-	return -ENODEV;
+out:
+	iounmap(pcdp);
+	return rc;
 }
Index: work-mm3/include/asm-ia64/sn/sn_sal.h
===================================================================
--- work-mm3.orig/include/asm-ia64/sn/sn_sal.h	2006-01-19 11:26:17.000000000 -0700
+++ work-mm3/include/asm-ia64/sn/sn_sal.h	2006-01-19 11:37:23.000000000 -0700
@@ -158,7 +158,7 @@
 static inline u32
 sn_sal_rev(void)
 {
-	struct ia64_sal_systab *systab = efi.sal_systab;
+	struct ia64_sal_systab *systab = __va(efi.sal_systab);
 
 	return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
 }

[PATCH 5/5] ACPI: clean up memory attribute checking for map/read/write

[Bjorn Helgaas]

ia64 ioremap is now smart enough to use the correct memory attributes,
so remove the EFI checks from osl.c.

Depends on the previous ia64 ioremap patch.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Index: work-mm3/drivers/acpi/osl.c
===================================================================
--- work-mm3.orig/drivers/acpi/osl.c	2006-01-19 11:37:23.000000000 -0700
+++ work-mm3/drivers/acpi/osl.c	2006-01-19 11:38:05.000000000 -0700
@@ -180,22 +180,14 @@
 acpi_os_map_memory(acpi_physical_address phys, acpi_size size,
 		   void __iomem ** virt)
 {
-	if (efi_enabled) {
-		if (EFI_MEMORY_WB & efi_mem_attributes(phys)) {
-			*virt = (void __iomem *)phys_to_virt(phys);
-		} else {
-			*virt = ioremap(phys, size);
-		}
-	} else {
-		if (phys > ULONG_MAX) {
-			printk(KERN_ERR PREFIX "Cannot map memory that high\n");
-			return AE_BAD_PARAMETER;
-		}
-		/*
-		 * ioremap checks to ensure this is in reserved space
-		 */
-		*virt = ioremap((unsigned long)phys, size);
+	if (phys > ULONG_MAX) {
+		printk(KERN_ERR PREFIX "Cannot map memory that high\n");
+		return AE_BAD_PARAMETER;
 	}
+	/*
+	 * ioremap checks to ensure this is in reserved space
+	 */
+	*virt = ioremap((unsigned long)phys, size);
 
 	if (!*virt)
 		return AE_NO_MEMORY;
@@ -405,18 +397,8 @@
 {
 	u32 dummy;
 	void __iomem *virt_addr;
-	int iomem = 0;
 
-	if (efi_enabled) {
-		if (EFI_MEMORY_WB & efi_mem_attributes(phys_addr)) {
-			/* HACK ALERT! We can use readb/w/l on real memory too.. */
-			virt_addr = (void __iomem *)phys_to_virt(phys_addr);
-		} else {
-			iomem = 1;
-			virt_addr = ioremap(phys_addr, width);
-		}
-	} else
-		virt_addr = (void __iomem *)phys_to_virt(phys_addr);
+	virt_addr = ioremap(phys_addr, width);
 	if (!value)
 		value = &dummy;
 
@@ -434,10 +416,7 @@
 		BUG();
 	}
 
-	if (efi_enabled) {
-		if (iomem)
-			iounmap(virt_addr);
-	}
+	iounmap(virt_addr);
 
 	return AE_OK;
 }
@@ -446,18 +425,8 @@
 acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width)
 {
 	void __iomem *virt_addr;
-	int iomem = 0;
 
-	if (efi_enabled) {
-		if (EFI_MEMORY_WB & efi_mem_attributes(phys_addr)) {
-			/* HACK ALERT! We can use writeb/w/l on real memory too */
-			virt_addr = (void __iomem *)phys_to_virt(phys_addr);
-		} else {
-			iomem = 1;
-			virt_addr = ioremap(phys_addr, width);
-		}
-	} else
-		virt_addr = (void __iomem *)phys_to_virt(phys_addr);
+	virt_addr = ioremap(phys_addr, width);
 
 	switch (width) {
 	case 8:
@@ -473,8 +442,7 @@
 		BUG();
 	}
 
-	if (iomem)
-		iounmap(virt_addr);
+	iounmap(virt_addr);
 
 	return AE_OK;
 }

Re: [Openipmi-developer] [PATCH 0/5] ia64 ioremap, DMI, EFI system table

[Matt Domsch]

On Thu, Jan 19, 2006 at 01:10:57PM -0700, Bjorn Helgaas wrote:
> OK, here's a set of patches to (hopefully) clean up this area
> a bit:
> 
> 1  Simplify efi_mem_attribute_range() so I can use it both for
>    /dev/mem validation and ioremap() attribute checking.
> 
> 2  Make ia64 ioremap() check memory attributes, so it works for
>    plain memory that only supports write-back access, as well as
>    for MMIO space that only supports uncacheable access.
> 
> 3  DMI ioremaps too much space, which makes it fail on machines
>    where the SMBIOS table is near the end of a memory region.
> 
> 4  Keep EFI table addresses as physical, not virtual.  The SMBIOS
>    address was physical on x86 but virtual on ia64, which broke
>    dmi_scan_machine().
> 
> 5  Use smarter ioremap() implementation to remove some cruft in
>    acpi_os_{read,write,map}_memory().  This one's just an optional
>    cleanup; I don't think it fixes any bugs.


This set of patches works for me on my IA64 Tiger4 (Dell PowerEdge
7250) in kernel 2.6.16-rc1-mm4.  modprobe ipmi_si successfully
automatically finds the IPMI controller now.

Thanks Bjorn for doing a more complete cleanup in support of this!

Thanks,
Matt

-- 
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Andrew Morton]

Matt Domsch <Matt_Domsch@dell.com> wrote:
>
> +dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
>

There's a patch in Andi's queue
(ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt-current/patches/feature/dmi-early)
which adds

#include <asm/dmi.h>

into arch/i386/kernel/dmi_scan.c.

hence with both your patch and Andi's patch applied, ia64 won't compile due
to missing asm/dmi.h.

I've been reverting Andi's patch due to this, but it seems reasonable that
dmi_scan.c be able to include asm/dmi.h..

So to get these thing to play together properly we'll need an
include/asm-ia64/dmi.h which does the stuff which is in the two dmi.h's
which Andi's patch creates.

Is that something you could take a look at, please?

You'll need a kernel to patch, so I'll include this in next -mm:

--- /dev/null	Thu Apr 11 07:25:15 2002
+++ 25-akpm/include/asm-ia64/dmi.h	Fri Mar 17 15:49:50 2006
@@ -0,0 +1,6 @@
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H 1
+
+#include <asm/io.h>
+
+#endif
diff -puN arch/i386/kernel/dmi_scan.c~ia64-use-i386-dmi_scanc-fix arch/i386/kernel/dmi_scan.c
--- 25/arch/i386/kernel/dmi_scan.c~ia64-use-i386-dmi_scanc-fix	Fri Mar 17 15:49:37 2006
+++ 25-akpm/arch/i386/kernel/dmi_scan.c	Fri Mar 17 15:49:37 2006
@@ -224,7 +224,7 @@ void __init dmi_scan_machine(void)
                 * needed during early boot.  This also means we can
                 * iounmap the space when we're done with it.
 		*/
-		p = ioremap((unsigned long)efi.smbios, 0x10000);
+		p = dmi_ioremap((unsigned long)efi.smbios, 0x10000);
 		if (p == NULL)
 			goto out;
 
@@ -235,11 +235,11 @@ void __init dmi_scan_machine(void)
 	}
 	else {
 		/*
-		 * no iounmap() for that ioremap(); it would be a no-op, but it's
-		 * so early in setup that sucker gets confused into doing what
-		 * it shouldn't if we actually call it.
+		 * no iounmap() for that ioremap(); it would be a no-op, but
+		 * it's so early in setup that sucker gets confused into doing
+		 * what it shouldn't if we actually call it.
 		 */
-		p = ioremap(0xF0000, 0x10000);
+		p = dmi_ioremap(0xF0000, 0x10000);
 		if (p == NULL)
 			goto out;
 
_


I assume that those ioremap->dmi_ioremap conversions are appropriate.

It could be that Andi's changes break the ia64 dmi impementation - I don't
know.  I guess it's OK if ia64 is not doing a scan "early".

The above might not compile, but I'll make sure that it does so before
releasing next -mm.

So.  Bottom line: please test the ia64 dmi patches in next -mm, send any
needed fixups, thanks.


We should move this code into drivers/ or something - #including other
architecture's stuff like this is awful.

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Fri, Mar 17, 2006 at 03:54:45PM -0800, Andrew Morton wrote:
> It could be that Andi's changes break the ia64 dmi impementation - I don't
> know.  I guess it's OK if ia64 is not doing a scan "early".

It's not done "early", because at this point it's only needed for
drivers.  On i386 it's done "early" to catch some chipsets
(coincidentally, Dell).

> The above might not compile, but I'll make sure that it does so before
> releasing next -mm.
> 
> So.  Bottom line: please test the ia64 dmi patches in next -mm, send any
> needed fixups, thanks.


Built 2.6.16-rc6-mm2 on ia64 Itanium2 (Dell PowerEdge 7250, aka Intel
Tiger4).  Compiled clean, loaded clean, works as expected.  Thanks!

I haven't tried same on x86_64 yet, will get to that ASAP.

Thanks,
Matt

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Matt Domsch]

On Sat, Mar 18, 2006 at 08:56:21AM -0600, Matt Domsch wrote:
> On Fri, Mar 17, 2006 at 03:54:45PM -0800, Andrew Morton wrote:
> > It could be that Andi's changes break the ia64 dmi impementation - I don't
> > know.  I guess it's OK if ia64 is not doing a scan "early".
> 
> It's not done "early", because at this point it's only needed for
> drivers.  On i386 it's done "early" to catch some chipsets
> (coincidentally, Dell).
> 
> > The above might not compile, but I'll make sure that it does so before
> > releasing next -mm.
> > 
> > So.  Bottom line: please test the ia64 dmi patches in next -mm, send any
> > needed fixups, thanks.
> 
> 
> Built 2.6.16-rc6-mm2 on ia64 Itanium2 (Dell PowerEdge 7250, aka Intel
> Tiger4).  Compiled clean, loaded clean, works as expected.  Thanks!

Built 2.6.16-rc6-mm2 on x86_64 Dell PowerEdge 2800.  Compiled clean,
loaded clean, works as expected.  Thanks!

-Matt

--
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

Re: [PATCH 2.6.15] ia64: use i386 dmi_scan.c

[Andrew Morton]

Matt Domsch <Matt_Domsch@dell.com> wrote:
>
> > Built 2.6.16-rc6-mm2 on ia64 Itanium2 (Dell PowerEdge 7250, aka Intel
>  > Tiger4).  Compiled clean, loaded clean, works as expected.  Thanks!
> 
>  Built 2.6.16-rc6-mm2 on x86_64 Dell PowerEdge 2800.  Compiled clean,
>  loaded clean, works as expected.  Thanks!

Sweet, thanks.