* USB problem after upgrade from 2.6.12.6 to 2.6.15
@ 2006-01-09 2:44 David Ronis
2006-01-11 6:42 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: David Ronis @ 2006-01-09 2:44 UTC (permalink / raw)
To: linux-kernel
I use gtkam to download photos from a Cannon A75 digital camera
connected to my laptop via one of the USB ports. After upgrading from
2.6.12.6 to 2.6.15 this stopped working. The camera is recognized, but
that all--none of the download commands work. I see the following in
syslog:
Jan 8 20:51:25 montroll kernel: usb 5-1: usbfs: interface 0 claimed by
usbfs while 'gtkam' sets config #1
/proc/bus/usb/devices shows:
{montroll:42} cat /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:07.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
P: Vendor=04a9 ProdID=30b5 Rev= 0.01
S: Manufacturer=Canon Inc.
S: Product=Canon Digital Camera
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=96ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:07.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c501 Rev= 9.10
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:13.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:13.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: USB problem after upgrade from 2.6.12.6 to 2.6.15
2006-01-09 2:44 USB problem after upgrade from 2.6.12.6 to 2.6.15 David Ronis
@ 2006-01-11 6:42 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2006-01-11 6:42 UTC (permalink / raw)
To: David.Ronis; +Cc: linux-kernel
On Sun, Jan 08, 2006 at 09:44:01PM -0500, David Ronis wrote:
> I use gtkam to download photos from a Cannon A75 digital camera
> connected to my laptop via one of the USB ports. After upgrading from
> 2.6.12.6 to 2.6.15 this stopped working. The camera is recognized, but
> that all--none of the download commands work. I see the following in
> syslog:
>
> Jan 8 20:51:25 montroll kernel: usb 5-1: usbfs: interface 0 claimed by
> usbfs while 'gtkam' sets config #1
Please upgrade your version of libgphoto, it should be fixed there.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-01-11 6:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-01-09 2:44 USB problem after upgrade from 2.6.12.6 to 2.6.15 David Ronis
2006-01-11 6:42 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).