* PANIC: sata_sil on 2.6.16-rc4-ide1
@ 2006-02-22 23:53 Chris Boot
2006-02-23 0:24 ` Alan Cox
0 siblings, 1 reply; 3+ messages in thread
From: Chris Boot @ 2006-02-22 23:53 UTC (permalink / raw)
To: linux-kernel
Hi all,
I upgraded from 2.6.16-rc2-ide2 to 2.6.16-rc4-ide1 and suffered the
panic pasted below. Needless to say this all worked fine with the
previous kernel (and some). I have two Seagate 250GB drives connected
to the controller (a PCI Adaptec 1205SA). I'm testing -ide so I don't
have the whole IDE layer just for my rarely used DVD-RW on my VIA PATA.
*** dmesg ***
[4294667.296000] Linux version 2.6.16-rc4-ide1 (bootc@arcadia.lan)
(gcc version 4.0.2 (Gentoo 4.0.2-r3, pie-8.7.8)) #1 PREEMPT Wed Feb
22 22:06:39 GMT 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009d800
(usable)
[4294667.296000] BIOS-e820: 000000000009d800 - 00000000000a0000
(reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000004fff0000
(usable)
[4294667.296000] BIOS-e820: 000000004fff0000 - 000000004fff3000
(ACPI NVS)
[4294667.296000] BIOS-e820: 000000004fff3000 - 0000000050000000
(ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
[4294667.296000] 383MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f5c80
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:10 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000,
GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl
dfl)
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 60000000 (gap:
50000000:aec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/md0 vga=0x31B
nmi_watchdog=1 libata.atapi_enabled=1 console=ttyS0,115200n1
console=tty0
[4294667.296000] Enabling fast FPU save and restore... done.
[4294667.296000] Enabling unmasked SIMD FPU exception support... done.
[4294667.296000] Initializing CPU#0
[4294667.296000] CPU 0 irqstacks, hard=c037c000 soft=c037d000
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1826.883 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294668.177000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[4294668.185000] Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
[4294668.239000] Memory: 1295668k/1310656k available (1771k kernel
code, 13860k reserved, 596k data, 152k init, 393152k highmem)
[4294668.250000] Checking if this processor honours the WP bit even
in supervisor mode... Ok.
[4294668.319000] Calibrating delay using timer specific routine..
3655.59 BogoMIPS (lpj=1827795)
[4294668.327000] Mount-cache hash table entries: 512
[4294668.332000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
[4294668.339000] CPU: L2 Cache: 512K (64 bytes/line)
[4294668.344000] Intel machine check architecture supported.
[4294668.349000] Intel machine check reporting enabled on CPU#0.
[4294668.355000] CPU: AMD Athlon(tm) XP 2500+ stepping 00
[4294668.360000] Checking 'hlt' instruction... OK.
[4294668.475000] ENABLING IO-APIC IRQs
[4294668.480000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.597000] NET: Registered protocol family 16
[4294668.603000] ACPI: bus type pci registered
[4294668.627000] PCI: PCI BIOS revision 2.10 entry at 0xfb350, last
bus=1
[4294668.633000] PCI: Using configuration type 1
[4294668.638000] ACPI: Subsystem revision 20060127
[4294668.654000] ACPI: Interpreter enabled
[4294668.658000] ACPI: Using IOAPIC for interrupt routing
[4294668.663000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.668000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.677000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[4294668.727000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11
12) *5
[4294668.734000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11
12)
[4294668.741000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11
12)
[4294668.748000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11
*12)
[4294668.755000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11
12) *0, disabled.
[4294668.763000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11
12) *0, disabled.
[4294668.771000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11
12) *0, disabled.
[4294668.779000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11
12) *0, disabled.
[4294668.788000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11
[4294668.794000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[4294668.800000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[4294668.805000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[4294668.814000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.820000] pnp: PnP ACPI init
[4294668.828000] pnp: PnP ACPI: found 11 devices
[4294668.832000] SCSI subsystem initialized
[4294668.836000] PCI: Using ACPI for IRQ routing
[4294668.841000] PCI: If a device doesn't work, try "pci=routeirq".
If it helps, post a report
[4294668.877000] PCI: Bridge: 0000:00:01.0
[4294668.881000] IO window: disabled.
[4294668.885000] MEM window: e0000000-e2ffffff
[4294668.889000] PREFETCH window: d0000000-dfffffff
[4294668.894000] Machine check exception polling timer started.
[4294668.899000] highmem bounce pool size: 64 pages
[4294668.905000] VFS: Disk quotas dquot_6.5.1
[4294668.909000] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[4294668.916000] SGI XFS with ACLs, security attributes, no debug
enabled
[4294668.922000] SGI XFS Quota Management subsystem
[4294668.927000] Initializing Cryptographic API
[4294668.931000] io scheduler noop registered
[4294668.936000] io scheduler anticipatory registered (default)
[4294668.941000] io scheduler deadline registered
[4294668.945000] io scheduler cfq registered
[4294668.950000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[4294668.956000] vesafb: framebuffer at 0xd0000000, mapped to
0xf8880000, using 10240k, total 262144k
[4294668.965000] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[4294668.971000] vesafb: protected mode interface info at c000:d5c0
[4294668.977000] vesafb: scrolling: redraw
[4294668.981000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[4294669.235000] Console: switching to colour frame buffer device 160x64
[4294669.242000] fb0: VESA VGA frame buffer device
[4294669.249000] Real Time Clock Driver v1.12ac
[4294669.254000] Software Watchdog Timer: 0.07 initialized.
soft_noboot=0 soft_margin=60 sec (nowayout= 0)
[4294669.265000] Hangcheck: starting hangcheck timer 0.9.0 (tick is
180 seconds, margin is 60 seconds).
[4294669.275000] Hangcheck: Using monotonic_clock().
[4294669.281000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[4294669.288000] PNP: PS/2 controller doesn't have AUX irq; using
default 12
[4294669.296000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.302000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.308000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing disabled
[4294669.317000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.324000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.332000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.338000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.345000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18
(level, low) -> IRQ 169
[4294669.354000] ata1: SATA max UDMA/100 cmd 0xF8802080 ctl
0xF880208A bmdma 0xF8802000 irq 169
[4294669.364000] ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl
0xF88020CA bmdma 0xF8802008 irq 169
[4294669.574000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[4294669.731000] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
[4294669.740000] printing eip:
[4294669.743000] 00000000
[4294669.746000] *pde = 00000000
[4294669.749000] Oops: 0000 [#1]
[4294669.749000] PREEMPT
[4294669.749000] Modules linked in:
[4294669.749000] CPU: 0
[4294669.749000] EIP: 0060:[<00000000>] Not tainted VLI
[4294669.749000] EFLAGS: 00010282 (2.6.16-rc4-ide1 #1)
[4294669.749000] EIP is at _stext+0x3feffde0/0x29
[4294669.749000] eax: f7e33280 ebx: f7e33280 ecx: c02c6500 edx:
f7e332fc
[4294669.749000] esi: f8802008 edi: f7e332fc ebp: f7e33310 esp:
c1b01ea8
[4294669.749000] ds: 007b es: 007b ss: 0068
[4294669.749000] Process swapper (pid: 1, threadinfo=c1b01000
task=c1b00a30)
[4294669.749000] Stack: <0>c024421f f7e332fc f7d3e000 f88020ca
f88020c0 00000002 f7cfc048 f7e3f2a8
[4294669.749000] f7e33280 00000000 00001000 c013a6fc 00000000
00000046 c0322304 c1b01000
[4294669.749000] f7de1ce0 f7de1ce8 f7de1ce0 0000000d 00000001
c1b01f10 c1b01f10 00000000
[4294669.749000] Call Trace:
[4294669.749000] [<c024421f>] ata_device_add+0x366/0xa59
[4294669.749000] [<c013a6fc>] __get_vm_area_node+0x7d/0x175
[4294669.749000] [<c026f445>] pcibios_set_master+0x19/0x77
[4294669.749000] [<c024712d>] sil_init_one+0x2da/0x30b
[4294669.749000] [<c0235dee>] __driver_attach+0x0/0x59
[4294669.749000] [<c01ea646>] pci_device_probe+0x36/0x55
[4294669.749000] [<c0235d4b>] driver_probe_device+0x3f/0x8e
[4294669.749000] [<c0235e24>] __driver_attach+0x36/0x59
[4294669.749000] [<c0235569>] bus_for_each_dev+0x37/0x59
[4294669.749000] [<c0235c4d>] driver_attach+0x11/0x13
[4294669.749000] [<c0235dee>] __driver_attach+0x0/0x59
[4294669.749000] [<c02357d7>] bus_add_driver+0x5a/0xd3
[4294669.749000] [<c01ea298>] __pci_register_driver+0x59/0x75
[4294669.749000] [<c01002f4>] init+0x7c/0x1b0
[4294669.749000] [<c0100278>] init+0x0/0x1b0
[4294669.749000] [<c0100a85>] kernel_thread_helper+0x5/0xb
[4294669.749000] Code: Bad EIP value.
[4294669.749000] <0>Kernel panic - not syncing: Attempted to kill init!
[4294670.660000]
*** relevant part of lspci ***
00:0a.0 Mass storage controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 02) (prog-if 01)
Subsystem: Adaptec SATAConnect 1205SA Host Controller
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 169
I/O ports at a400 [size=8]
I/O ports at a800 [size=4]
I/O ports at ac00 [size=8]
I/O ports at b000 [size=4]
I/O ports at b400 [size=16]
Memory at e6001000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 60000000 [disabled] [size=512K]
Capabilities: <access denied>
00: 95 10 12 31 07 00 b0 02 02 01 80 01 08 20 00 00
10: 01 a4 00 00 01 a8 00 00 01 ac 00 00 01 b0 00 00
20: 01 b4 00 00 00 10 00 e6 00 00 00 00 05 90 50 02
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
HTH,
Chris
--
Chris Boot
bootc@bootc.net
http://www.bootc.net/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PANIC: sata_sil on 2.6.16-rc4-ide1
2006-02-22 23:53 PANIC: sata_sil on 2.6.16-rc4-ide1 Chris Boot
@ 2006-02-23 0:24 ` Alan Cox
2006-02-23 10:24 ` Chris Boot
0 siblings, 1 reply; 3+ messages in thread
From: Alan Cox @ 2006-02-23 0:24 UTC (permalink / raw)
To: Chris Boot; +Cc: linux-kernel
On Mer, 2006-02-22 at 23:53 +0000, Chris Boot wrote:
> Hi all,
>
> I upgraded from 2.6.16-rc2-ide2 to 2.6.16-rc4-ide1 and suffered the
> panic pasted below. Needless to say this all worked fine with the
> previous kernel (and some). I have two Seagate 250GB drives connected
> to the controller (a PCI Adaptec 1205SA). I'm testing -ide so I don't
> have the whole IDE layer just for my rarely used DVD-RW on my VIA PATA.
Do you see the same crash on 2.6.16-rc4 without the IDE diff ?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PANIC: sata_sil on 2.6.16-rc4-ide1
2006-02-23 0:24 ` Alan Cox
@ 2006-02-23 10:24 ` Chris Boot
0 siblings, 0 replies; 3+ messages in thread
From: Chris Boot @ 2006-02-23 10:24 UTC (permalink / raw)
To: Alan Cox; +Cc: linux-kernel
On 23 Feb 2006, at 00:24, Alan Cox wrote:
> On Mer, 2006-02-22 at 23:53 +0000, Chris Boot wrote:
>> Hi all,
>>
>> I upgraded from 2.6.16-rc2-ide2 to 2.6.16-rc4-ide1 and suffered the
>> panic pasted below. Needless to say this all worked fine with the
>> previous kernel (and some). I have two Seagate 250GB drives connected
>> to the controller (a PCI Adaptec 1205SA). I'm testing -ide so I don't
>> have the whole IDE layer just for my rarely used DVD-RW on my VIA
>> PATA.
>
> Do you see the same crash on 2.6.16-rc4 without the IDE diff ?
Nope, works fine there, except obviously the PATA doesn't! :-)
[4294672.259000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.265000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.271000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing disabled
[4294672.280000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.288000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.295000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.302000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.308000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18
(level, low) -> IRQ 169
[4294672.317000] ata1: SATA max UDMA/100 cmd 0xF8802080 ctl
0xF880208A bmdma 0xF8802000 irq 169
[4294672.327000] ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl
0xF88020CA bmdma 0xF8802008 irq 169
[4294672.538000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[4294672.698000] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294672.705000] ata1: dev 0 configured for UDMA/100
[4294672.711000] scsi0 : sata_sil
[4294672.915000] ata2: SATA link up 1.5 Gbps (SStatus 113)
[4294673.075000] ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294673.082000] ata2: dev 0 configured for UDMA/100
[4294673.088000] scsi1 : sata_sil
[4294673.091000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294673.100000] Type: Direct-Access ANSI
SCSI revision: 05
[4294673.109000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294673.118000] Type: Direct-Access ANSI
SCSI revision: 05
[4294673.127000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ
11, using IRQ 20
[4294673.135000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294673.142000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -
> GSI 20 (level, low) -> IRQ 177
[4294673.153000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 1
[4294673.159000] sata_via 0000:00:0f.0: routed to hard irq line 1
[4294673.201000] ata3: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma
0xC800 irq 177
[4294673.244000] ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma
0xC808 irq 177
[4294673.488000] ata3: SATA link up 1.5 Gbps (SStatus 113)
[4294673.682000] ata3: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294673.724000] ata3: dev 0 configured for UDMA/133
[4294673.765000] scsi2 : sata_via
[4294674.004000] ata4: SATA link up 1.5 Gbps (SStatus 113)
[4294674.198000] ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors:
LBA48
[4294674.240000] ata4: dev 0 configured for UDMA/133
[4294674.281000] scsi3 : sata_via
[4294674.319000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294674.362000] Type: Direct-Access ANSI
SCSI revision: 05
[4294674.406000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[4294674.450000] Type: Direct-Access ANSI
SCSI revision: 05
HTH,
Chris
--
Chris Boot
bootc@bootc.net
http://www.bootc.net/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-02-23 10:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-02-22 23:53 PANIC: sata_sil on 2.6.16-rc4-ide1 Chris Boot
2006-02-23 0:24 ` Alan Cox
2006-02-23 10:24 ` Chris Boot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).