From: Kristen Accardi <kristen.c.accardi@intel.com>
To: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
pcihpd-discuss@lists.sourceforge.net
Cc: greg@kroah.com, len.brown@intel.com,
muneda.takahiro@jp.fujitsu.com, pavel@ucw.cz,
Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Subject: [patch 3/3] acpi: remove dock event handling from ibm_acpi
Date: Thu, 23 Feb 2006 11:56:20 -0800 [thread overview]
Message-ID: <1140724580.11750.18.camel@whizzy> (raw)
In-Reply-To: 20060223195022.747891000@intel.com
Remove dock station support from ibm_acpi by default. This support has been
put into acpiphp instead. Allow ibm_acpi to continue to provide docking
station support via config option for laptops/docking stations that are
not supported by acpiphp.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
---
drivers/acpi/Kconfig | 12 ++++++++++++
drivers/acpi/ibm_acpi.c | 13 ++++++++++---
2 files changed, 22 insertions(+), 3 deletions(-)
--- linux-dock-mm.orig/drivers/acpi/Kconfig
+++ linux-dock-mm/drivers/acpi/Kconfig
@@ -205,6 +205,18 @@ config ACPI_IBM
If you have an IBM ThinkPad laptop, say Y or M here.
+config ACPI_IBM_DOCK
+ bool "Legacy Docking Station Support"
+ depends on ACPI_IBM
+ default n
+ ---help---
+ Allows the ibm_acpi driver to handle docking station events.
+ This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will
+ allow locking and removing the laptop from the docking station,
+ but will not properly connect PCI devices.
+
+ If you are not sure, say N here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
--- linux-dock-mm.orig/drivers/acpi/ibm_acpi.c
+++ linux-dock-mm/drivers/acpi/ibm_acpi.c
@@ -160,13 +160,13 @@ IBM_HANDLE(cmos, root, "\\UCMS", /* R50,
"\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */
"\\CMS", /* R40, R40e */
); /* all others */
-
+#ifdef CONFIG_ACPI_IBM_DOCK
IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
"\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
"\\_SB.PCI0.PCI1.DOCK", /* all others */
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
+#endif
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
"\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
@@ -844,7 +844,7 @@ static int _sta(acpi_handle handle)
return status;
}
-
+#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
static int dock_read(char *p)
@@ -907,6 +907,7 @@ static void dock_notify(struct ibm_struc
acpi_bus_generate_event(ibm->device, event, 0); /* unknown */
}
}
+#endif
static int bay_status_supported;
static int bay_status2_supported;
@@ -1574,6 +1575,7 @@ static struct ibm_struct ibms[] = {
.read = light_read,
.write = light_write,
},
+#ifdef CONFIG_ACPI_IBM_DOCK
{
.name = "dock",
.read = dock_read,
@@ -1589,6 +1591,7 @@ static struct ibm_struct ibms[] = {
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
+#endif
{
.name = "bay",
.init = bay_init,
@@ -1880,7 +1883,9 @@ IBM_PARAM(hotkey);
IBM_PARAM(bluetooth);
IBM_PARAM(video);
IBM_PARAM(light);
+#ifdef CONFIG_ACPI_IBM_DOCK
IBM_PARAM(dock);
+#endif
IBM_PARAM(bay);
IBM_PARAM(cmos);
IBM_PARAM(led);
@@ -1927,7 +1932,9 @@ static int __init acpi_ibm_init(void)
IBM_HANDLE_INIT(hkey);
IBM_HANDLE_INIT(lght);
IBM_HANDLE_INIT(cmos);
+#ifdef CONFIG_ACPI_IBM_DOCK
IBM_HANDLE_INIT(dock);
+#endif
IBM_HANDLE_INIT(pci);
IBM_HANDLE_INIT(bay);
if (bay_handle)
--
next prev parent reply other threads:[~2006-02-23 19:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060223195022.747891000@intel.com>
2006-02-23 19:56 ` [patch 1/3] acpi: export acpi_bus_trim Kristen Accardi
2006-02-23 19:56 ` [patch 2/3] acpiphp: add dock event handling Kristen Accardi
2006-02-24 6:12 ` MUNEDA Takahiro
2006-02-24 17:29 ` [Pcihpd-discuss] " Kristen Accardi
2006-03-02 11:50 ` MUNEDA Takahiro
2006-02-23 19:56 ` Kristen Accardi [this message]
[not found] <20060222190839.268403000@intel.com>
2006-02-22 19:21 ` [patch 3/3] acpi: remove dock event handling from ibm_acpi Kristen Accardi
2006-02-22 22:57 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1140724580.11750.18.camel@whizzy \
--to=kristen.c.accardi@intel.com \
--cc=greg@kroah.com \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=muneda.takahiro@jp.fujitsu.com \
--cc=pavel@ucw.cz \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).