* [PATCH 0/8] Rename at91_serial driver as atmel_serial
@ 2006-09-27 16:57 Haavard Skinnemoen
2006-09-27 16:57 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Haavard Skinnemoen
0 siblings, 1 reply; 27+ messages in thread
From: Haavard Skinnemoen @ 2006-09-27 16:57 UTC (permalink / raw)
To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen
Hi,
Here's the big at91_serial rename I've been talking about before. It
turned out to be quite big on its own, so I'm sending it as a separate
series. I have a few more patches for the atmel_serial driver (or
at91_serial driver, depending on whether you'll accept this series)
which I'll send you tomorrow. Please give me a hint about whether this
series is acceptable or not so that I can rework the other patches as
appropriate.
Patch #6 turned out to be too big to send inline, so I'm sending a link
to it instead. I can send it to you in private if you want.
Also, the patches have been made with git-format-patch -M, so they
won't work with patch, only with git. This reduced the size of the
first two patches a lot.
Shortlog, diffstat and summary of the full series follows.
Haavard
Haavard Skinnemoen:
at91_serial -> atmel_serial: at91rm9200_usart.h
at91_serial -> atmel_serial: at91_serial.c
at91_serial -> atmel_serial: Kconfig symbols
at91_serial -> atmel_serial: Platform device name
at91_serial -> atmel_serial: Public definitions
at91_serial -> atmel_serial: Internal names
serial: Rename PORT_AT91 -> PORT_ATMEL
atmel_serial: Kill at91_register_uart_fns
arch/arm/configs/at91rm9200dk_defconfig | 6
arch/arm/configs/at91rm9200ek_defconfig | 6
arch/arm/configs/ateb9200_defconfig | 6
arch/arm/configs/carmeva_defconfig | 4
arch/arm/configs/csb337_defconfig | 6
arch/arm/configs/csb637_defconfig | 6
arch/arm/configs/kafa_defconfig | 6
arch/arm/configs/kb9202_defconfig | 4
arch/arm/configs/onearm_defconfig | 6
arch/arm/mach-at91rm9200/devices.c | 34 -
arch/avr32/configs/atstk1002_defconfig | 6
arch/avr32/mach-at32ap/at32ap7000.c | 46 -
drivers/serial/Kconfig | 14
drivers/serial/Makefile | 2
drivers/serial/at91_serial.c | 980 --------------------
drivers/serial/atmel_serial.c | 940 +++++++++++++++++++
drivers/serial/atmel_serial.h | 123 +++
include/asm-arm/arch-at91rm9200/at91rm9200_usart.h | 123 ---
include/asm-arm/arch-at91rm9200/board.h | 4
include/asm-arm/arch-at91rm9200/hardware.h | 2
include/asm-arm/mach/serial_at91.h | 33 -
include/asm-avr32/arch-at32ap/at91rm9200_usart.h | 123 ---
include/asm-avr32/arch-at32ap/board.h | 4
include/asm-avr32/mach/serial_at91.h | 33 -
include/linux/serial_core.h | 4
25 files changed, 1146 insertions(+), 1375 deletions(-)
delete mode 100644 drivers/serial/at91_serial.c
create mode 100644 drivers/serial/atmel_serial.c
create mode 100644 drivers/serial/atmel_serial.h
delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
delete mode 100644 include/asm-arm/mach/serial_at91.h
delete mode 100644 include/asm-avr32/arch-at32ap/at91rm9200_usart.h
delete mode 100644 include/asm-avr32/mach/serial_at91.h
^ permalink raw reply [flat|nested] 27+ messages in thread* [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h 2006-09-27 16:57 [PATCH 0/8] Rename at91_serial driver as atmel_serial Haavard Skinnemoen @ 2006-09-27 16:57 ` Haavard Skinnemoen 2006-09-27 16:57 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Haavard Skinnemoen 2006-09-28 8:20 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Andrew Victor 0 siblings, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:57 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename it atmel_usart.h. Also delete AVR32's version of this file. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/at91_serial.c | 3 .../serial/atmel_serial.h | 2 include/asm-avr32/arch-at32ap/at91rm9200_usart.h | 123 -------------------- 3 files changed, 3 insertions(+), 125 deletions(-) diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 54c6b2a..49a3c7c 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -36,13 +36,14 @@ #include <linux/platform_device.h> #include <asm/io.h> -#include <asm/arch/at91rm9200_usart.h> #include <asm/arch/at91rm9200_pdc.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> #include <asm/arch/system.h> #include <asm/arch/gpio.h> +#include "atmel_serial.h" + #if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h b/drivers/serial/atmel_serial.h similarity index 99% rename from include/asm-arm/arch-at91rm9200/at91rm9200_usart.h rename to drivers/serial/atmel_serial.h index 79f851e..d38b24a 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h +++ b/drivers/serial/atmel_serial.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h + * drivers/serial/atmel_serial.h * * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) SAN People diff --git a/include/asm-avr32/arch-at32ap/at91rm9200_usart.h b/include/asm-avr32/arch-at32ap/at91rm9200_usart.h deleted file mode 100644 index 79f851e..0000000 --- a/include/asm-avr32/arch-at32ap/at91rm9200_usart.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_USART_H -#define AT91RM9200_USART_H - -#define AT91_US_CR 0x00 /* Control Register */ -#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */ -#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */ -#define AT91_US_RXEN (1 << 4) /* Receiver Enable */ -#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */ -#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */ -#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */ -#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */ -#define AT91_US_STTBRK (1 << 9) /* Start Break */ -#define AT91_US_STPBRK (1 << 10) /* Stop Break */ -#define AT91_US_STTTO (1 << 11) /* Start Time-out */ -#define AT91_US_SENDA (1 << 12) /* Send Address */ -#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */ -#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */ -#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ -#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */ -#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */ - -#define AT91_US_MR 0x04 /* Mode Register */ -#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */ -#define AT91_US_USMODE_NORMAL 0 -#define AT91_US_USMODE_RS485 1 -#define AT91_US_USMODE_HWHS 2 -#define AT91_US_USMODE_MODEM 3 -#define AT91_US_USMODE_ISO7816_T0 4 -#define AT91_US_USMODE_ISO7816_T1 6 -#define AT91_US_USMODE_IRDA 8 -#define AT91_US_USCLKS (3 << 4) /* Clock Selection */ -#define AT91_US_CHRL (3 << 6) /* Character Length */ -#define AT91_US_CHRL_5 (0 << 6) -#define AT91_US_CHRL_6 (1 << 6) -#define AT91_US_CHRL_7 (2 << 6) -#define AT91_US_CHRL_8 (3 << 6) -#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */ -#define AT91_US_PAR (7 << 9) /* Parity Type */ -#define AT91_US_PAR_EVEN (0 << 9) -#define AT91_US_PAR_ODD (1 << 9) -#define AT91_US_PAR_SPACE (2 << 9) -#define AT91_US_PAR_MARK (3 << 9) -#define AT91_US_PAR_NONE (4 << 9) -#define AT91_US_PAR_MULTI_DROP (6 << 9) -#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -#define AT91_US_NBSTOP_1 (0 << 12) -#define AT91_US_NBSTOP_1_5 (1 << 12) -#define AT91_US_NBSTOP_2 (2 << 12) -#define AT91_US_CHMODE (3 << 14) /* Channel Mode */ -#define AT91_US_CHMODE_NORMAL (0 << 14) -#define AT91_US_CHMODE_ECHO (1 << 14) -#define AT91_US_CHMODE_LOC_LOOP (2 << 14) -#define AT91_US_CHMODE_REM_LOOP (3 << 14) -#define AT91_US_MSBF (1 << 16) /* Bit Order */ -#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */ -#define AT91_US_CLKO (1 << 18) /* Clock Output Select */ -#define AT91_US_OVER (1 << 19) /* Oversampling Mode */ -#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */ -#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */ -#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ - -#define AT91_US_IER 0x08 /* Interrupt Enable Register */ -#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */ -#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */ -#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -#define AT91_US_OVRE (1 << 5) /* Overrun Error */ -#define AT91_US_FRAME (1 << 6) /* Framing Error */ -#define AT91_US_PARE (1 << 7) /* Parity Error */ -#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -#define AT91_US_NACK (1 << 13) /* Non Acknowledge */ -#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ -#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -#define AT91_US_RI (1 << 20) /* RI */ -#define AT91_US_DSR (1 << 21) /* DSR */ -#define AT91_US_DCD (1 << 22) /* DCD */ -#define AT91_US_CTS (1 << 23) /* CTS */ - -#define AT91_US_IDR 0x0c /* Interrupt Disable Register */ -#define AT91_US_IMR 0x10 /* Interrupt Mask Register */ -#define AT91_US_CSR 0x14 /* Channel Status Register */ -#define AT91_US_RHR 0x18 /* Receiver Holding Register */ -#define AT91_US_THR 0x1c /* Transmitter Holding Register */ - -#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define AT91_US_CD (0xffff << 0) /* Clock Divider */ - -#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */ -#define AT91_US_TO (0xffff << 0) /* Time-out Value */ - -#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define AT91_US_TG (0xff << 0) /* Timeguard Value */ - -#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */ -#define AT91_US_NER 0x44 /* Number of Errors Register */ -#define AT91_US_IF 0x4c /* IrDA Filter Register */ - -#endif -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c 2006-09-27 16:57 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Haavard Skinnemoen @ 2006-09-27 16:57 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Haavard Skinnemoen 2006-09-28 8:22 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Andrew Victor 2006-09-28 8:20 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Andrew Victor 1 sibling, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:57 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Rename at91_serial.c atmel_serial.c Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/Makefile | 2 +- drivers/serial/{at91_serial.c => atmel_serial.c} | 0 2 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 927faee..e49808a 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -54,5 +54,5 @@ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o -obj-$(CONFIG_SERIAL_AT91) += at91_serial.o +obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o diff --git a/drivers/serial/at91_serial.c b/drivers/serial/atmel_serial.c similarity index 100% rename from drivers/serial/at91_serial.c rename to drivers/serial/atmel_serial.c -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols 2006-09-27 16:57 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen 2006-09-28 8:34 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Andrew Victor 2006-09-28 8:22 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Andrew Victor 1 sibling, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- arch/arm/configs/at91rm9200dk_defconfig | 6 +++--- arch/arm/configs/at91rm9200ek_defconfig | 6 +++--- arch/arm/configs/ateb9200_defconfig | 6 +++--- arch/arm/configs/carmeva_defconfig | 4 ++-- arch/arm/configs/csb337_defconfig | 6 +++--- arch/arm/configs/csb637_defconfig | 6 +++--- arch/arm/configs/kafa_defconfig | 6 +++--- arch/arm/configs/kb9202_defconfig | 4 ++-- arch/arm/configs/onearm_defconfig | 6 +++--- arch/arm/mach-at91rm9200/devices.c | 2 +- arch/avr32/configs/atstk1002_defconfig | 6 +++--- drivers/serial/Kconfig | 14 +++++++------- drivers/serial/Makefile | 2 +- drivers/serial/atmel_serial.c | 6 +++--- include/asm-arm/mach/serial_at91.h | 2 +- include/asm-avr32/mach/serial_at91.h | 2 +- 16 files changed, 42 insertions(+), 42 deletions(-) diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 4f3d8d3..c82e466 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -553,9 +553,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 08b5dc3..b983fc5 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -534,9 +534,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index bee7813..15e6b0b 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -656,9 +656,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig index 8a075c8..d24ae87 100644 --- a/arch/arm/configs/carmeva_defconfig +++ b/arch/arm/configs/carmeva_defconfig @@ -455,8 +455,8 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index cf3fa5c..a2d6fd3 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 640d70c..2a1ac6c 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 1db633e..54fcd75 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -536,9 +536,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 45396e0..b4cd4b4 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -418,8 +418,8 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 6a93e3a..cb1d94f 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -583,9 +583,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 4352acb..467ef6d 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -544,7 +544,7 @@ #endif * UART * -------------------------------------------------------------------- */ -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { .start = AT91_VA_BASE_SYS + AT91_DBGU, diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 1d22255..6c2c5e0 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -385,9 +385,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5b48ac2..4f962de 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -299,17 +299,17 @@ config SERIAL_AMBA_PL011_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_AT91 - bool "AT91RM9200 / AT91SAM9261 serial port support" +config SERIAL_ATMEL + bool "AT91 / AT32 on-chip serial port support" depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) select SERIAL_CORE help This enables the driver for the on-chip UARTs of the Atmel AT91RM9200 and AT91SAM926 processor. -config SERIAL_AT91_CONSOLE - bool "Support for console on AT91RM9200 / AT91SAM9261 serial port" - depends on SERIAL_AT91=y +config SERIAL_ATMEL_CONSOLE + bool "Support for console on AT91 / AT32 serial port" + depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE help Say Y here if you wish to use a UART on the Atmel AT91RM9200 or @@ -317,9 +317,9 @@ config SERIAL_AT91_CONSOLE which receives all kernel messages and warnings and which allows logins in single user mode). -config SERIAL_AT91_TTYAT +config SERIAL_ATMEL_TTYAT bool "Install as device ttyAT0-4 instead of ttyS0-4" - depends on SERIAL_AT91=y + depends on SERIAL_ATMEL=y help Say Y here if you wish to have the five internal AT91RM9200 UARTs appear as /dev/ttyAT0-4 (major 204, minor 154-158) instead of the diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index e49808a..b4d8a7c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -54,5 +54,5 @@ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o -obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o +obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 49a3c7c..e33caa9 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -44,13 +44,13 @@ #include <asm/arch/gpio.h> #include "atmel_serial.h" -#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> -#ifdef CONFIG_SERIAL_AT91_TTYAT +#ifdef CONFIG_SERIAL_ATMEL_TTYAT /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we * should coexist with the 8250 driver, such as if we have an external 16C550 @@ -726,7 +726,7 @@ void __init at91_register_uart_fns(struc } -#ifdef CONFIG_SERIAL_AT91_CONSOLE +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void at91_console_putchar(struct uart_port *port, int ch) { while (!(UART_GET_CSR(port) & AT91_US_TXRDY)) diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h index 1290bb3..239e1f6 100644 --- a/include/asm-arm/mach/serial_at91.h +++ b/include/asm-arm/mach/serial_at91.h @@ -24,7 +24,7 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h index 1290bb3..239e1f6 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/include/asm-avr32/mach/serial_at91.h @@ -24,7 +24,7 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 4/8] at91_serial -> atmel_serial: Platform device name 2006-09-27 16:58 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen ` (2 more replies) 2006-09-28 8:34 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Andrew Victor 1 sibling, 3 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Rename the "at91_usart" platform driver "atmel_usart" and update platform devices accordingly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- arch/arm/mach-at91rm9200/devices.c | 10 ++++---- arch/avr32/mach-at32ap/at32ap7000.c | 42 ++++++++++++++++++----------------- drivers/serial/atmel_serial.c | 2 +- 3 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 467ef6d..78d6a1a 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -564,7 +564,7 @@ static struct at91_uart_data dbgu_data = }; static struct platform_device at91rm9200_dbgu_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 0, .dev = { .platform_data = &dbgu_data, @@ -599,7 +599,7 @@ static struct at91_uart_data uart0_data }; static struct platform_device at91rm9200_uart0_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 1, .dev = { .platform_data = &uart0_data, @@ -641,7 +641,7 @@ static struct at91_uart_data uart1_data }; static struct platform_device at91rm9200_uart1_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 2, .dev = { .platform_data = &uart1_data, @@ -682,7 +682,7 @@ static struct at91_uart_data uart2_data }; static struct platform_device at91rm9200_uart2_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 3, .dev = { .platform_data = &uart2_data, @@ -717,7 +717,7 @@ static struct at91_uart_data uart3_data }; static struct platform_device at91rm9200_uart3_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 4, .dev = { .platform_data = &uart3_data, diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 37982b6..aca7890 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -523,35 +523,35 @@ void __init at32_add_system_devices(void * USART * -------------------------------------------------------------------- */ -static struct resource usart0_resource[] = { +static struct resource atmel_usart0_resource[] = { PBMEM(0xffe00c00), IRQ(7), }; -DEFINE_DEV(usart, 0); -DEV_CLK(usart, usart0, pba, 4); +DEFINE_DEV(atmel_usart, 0); +DEV_CLK(usart, atmel_usart0, pba, 4); -static struct resource usart1_resource[] = { +static struct resource atmel_usart1_resource[] = { PBMEM(0xffe01000), IRQ(7), }; -DEFINE_DEV(usart, 1); -DEV_CLK(usart, usart1, pba, 4); +DEFINE_DEV(atmel_usart, 1); +DEV_CLK(usart, atmel_usart1, pba, 4); -static struct resource usart2_resource[] = { +static struct resource atmel_usart2_resource[] = { PBMEM(0xffe01400), IRQ(8), }; -DEFINE_DEV(usart, 2); -DEV_CLK(usart, usart2, pba, 5); +DEFINE_DEV(atmel_usart, 2); +DEV_CLK(usart, atmel_usart2, pba, 5); -static struct resource usart3_resource[] = { +static struct resource atmel_usart3_resource[] = { PBMEM(0xffe01800), IRQ(9), }; -DEFINE_DEV(usart, 3); -DEV_CLK(usart, usart3, pba, 6); +DEFINE_DEV(atmel_usart, 3); +DEV_CLK(usart, atmel_usart3, pba, 6); -static inline void configure_usart0_pins(void) +static inline void configure_atmel_usart0_pins(void) { portmux_set_func(PIOA, 8, FUNC_B); /* RXD */ portmux_set_func(PIOA, 9, FUNC_B); /* TXD */ @@ -581,19 +581,19 @@ static struct platform_device *setup_usa switch (id) { case 0: - pdev = &usart0_device; + pdev = &atmel_usart0_device; configure_usart0_pins(); break; case 1: - pdev = &usart1_device; + pdev = &atmel_usart1_device; configure_usart1_pins(); break; case 2: - pdev = &usart2_device; + pdev = &atmel_usart2_device; configure_usart2_pins(); break; case 3: - pdev = &usart3_device; + pdev = &atmel_usart3_device; configure_usart3_pins(); break; default: @@ -813,10 +813,10 @@ struct clk *at32_clock_list[] = { &pio1_mck, &pio2_mck, &pio3_mck, - &usart0_usart, - &usart1_usart, - &usart2_usart, - &usart3_usart, + &atmel_usart0_usart, + &atmel_usart1_usart, + &atmel_usart2_usart, + &atmel_usart3_usart, &macb0_hclk, &macb0_pclk, &spi0_mck, diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index e33caa9..b5f9e31 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -947,7 +947,7 @@ static struct platform_driver at91_seria .suspend = at91_serial_suspend, .resume = at91_serial_resume, .driver = { - .name = "at91_usart", + .name = "atmel_usart", .owner = THIS_MODULE, }, }; -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 5/8] at91_serial -> atmel_serial: Public definitions 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Haavard Skinnemoen 2006-09-28 8:54 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Andrew Victor 2006-09-28 8:35 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Andrew Victor 2006-09-28 12:55 ` Haavard Skinnemoen 2 siblings, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Rename the following public definitions: * AT91_NR_UART -> ATMEL_NR_UART * struct at91_uart_data -> struct atmel_uart_data * at91_default_console_device -> atmel_default_console_device Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- arch/arm/mach-at91rm9200/devices.c | 22 +++++++++++----------- arch/avr32/mach-at32ap/at32ap7000.c | 4 ++-- drivers/serial/atmel_serial.c | 14 +++++++------- include/asm-arm/arch-at91rm9200/board.h | 4 ++-- include/asm-arm/arch-at91rm9200/hardware.h | 2 +- include/asm-avr32/arch-at32ap/board.h | 4 ++-- 6 files changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 78d6a1a..ffc229f 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -558,7 +558,7 @@ static struct resource dbgu_resources[] }, }; -static struct at91_uart_data dbgu_data = { +static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ }; @@ -593,7 +593,7 @@ static struct resource uart0_resources[] }, }; -static struct at91_uart_data uart0_data = { +static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -635,7 +635,7 @@ static struct resource uart1_resources[] }, }; -static struct at91_uart_data uart1_data = { +static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -676,7 +676,7 @@ static struct resource uart2_resources[] }, }; -static struct at91_uart_data uart2_data = { +static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -711,7 +711,7 @@ static struct resource uart3_resources[] }, }; -static struct at91_uart_data uart3_data = { +static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -733,8 +733,8 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ } -struct platform_device *at91_uarts[AT91_NR_UART]; /* the UARTs to use */ -struct platform_device *at91_default_console_device; /* the serial console device */ +struct platform_device *at91_uarts[ATMEL_NR_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) { @@ -775,9 +775,9 @@ void __init at91_init_serial(struct at91 } /* Set serial console device */ - if (config->console_tty < AT91_NR_UART) - at91_default_console_device = at91_uarts[config->console_tty]; - if (!at91_default_console_device) + if (config->console_tty < ATMEL_NR_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) printk(KERN_INFO "AT91: No default serial console defined.\n"); } @@ -785,7 +785,7 @@ void __init at91_add_device_serial(void) { int i; - for (i = 0; i < AT91_NR_UART; i++) { + for (i = 0; i < ATMEL_NR_UART; i++) { if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index aca7890..536bc88 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -615,11 +615,11 @@ struct platform_device *__init at32_add_ return pdev; } -struct platform_device *at91_default_console_device; +struct platform_device *atmel_default_console_device; void __init at32_setup_serial_console(unsigned int usart_id) { - at91_default_console_device = setup_usart(usart_id); + atmel_default_console_device = setup_usart(usart_id); } /* -------------------------------------------------------------------- diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index b5f9e31..55ca5df 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -113,7 +113,7 @@ struct at91_uart_port { unsigned short suspended; /* is port suspended? */ }; -static struct at91_uart_port at91_ports[AT91_NR_UART]; +static struct at91_uart_port at91_ports[ATMEL_NR_UART]; #ifdef SUPPORT_SYSRQ static struct console at91_console; @@ -682,7 +682,7 @@ static struct uart_ops at91_pops = { static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev) { struct uart_port *port = &at91_port->uart; - struct at91_uart_data *data = pdev->dev.platform_data; + struct atmel_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; @@ -834,9 +834,9 @@ #define AT91_CONSOLE_DEVICE &at91_consol */ static int __init at91_console_init(void) { - if (at91_default_console_device) { - add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL); - at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device); + if (atmel_default_console_device) { + add_preferred_console(AT91_DEVICENAME, atmel_default_console_device->id, NULL); + at91_init_port(&(at91_ports[atmel_default_console_device->id]), atmel_default_console_device); register_console(&at91_console); } @@ -849,7 +849,7 @@ console_initcall(at91_console_init); */ static int __init at91_late_console_init(void) { - if (at91_default_console_device && !(at91_console.flags & CON_ENABLED)) + if (atmel_default_console_device && !(at91_console.flags & CON_ENABLED)) register_console(&at91_console); return 0; @@ -866,7 +866,7 @@ static struct uart_driver at91_uart = { .dev_name = AT91_DEVICENAME, .major = SERIAL_AT91_MAJOR, .minor = MINOR_START, - .nr = AT91_NR_UART, + .nr = ATMEL_NR_UART, .cons = AT91_CONSOLE_DEVICE, }; diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index c1ca9a4..d565270 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -97,10 +97,10 @@ struct at91_uart_config { unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; -extern struct platform_device *at91_default_console_device; +extern struct platform_device *atmel_default_console_device; extern void __init at91_init_serial(struct at91_uart_config *config); -struct at91_uart_data { +struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ }; diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 235d39d..16d6056 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -57,7 +57,7 @@ #define AT91_SRAM_SIZE 0x00004000 /* In #define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) /* Serial ports */ -#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ +#define ATMEL_NR_UART 5 /* 4 USART3's and one DBGU port */ /* FLASH */ #define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 39368e1..7e0790b 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -9,8 +9,8 @@ #include <linux/types.h> /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -#define AT91_NR_UART 4 -extern struct platform_device *at91_default_console_device; +#define ATMEL_NR_UART 4 +extern struct platform_device *atmel_default_console_device; struct platform_device *at32_add_device_usart(unsigned int id); -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 6/8] at91_serial -> atmel_serial: Internal names 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Haavard Skinnemoen 2006-09-28 9:02 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Andrew Victor 2006-09-28 8:54 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Andrew Victor 1 sibling, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen Prefix all internal functions and variables with atmel_ instead of at91_. The at91_register_uart_fns() stuff is left as is since I can't find any actual users of it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/atmel_serial.c | 496 +++++++++++++++++++++-------------------- drivers/serial/atmel_serial.h | 196 ++++++++-------- 2 files changed, 346 insertions(+), 346 deletions(-) The patch weighs in at 47K, so I put it at http://avr32linux.org/twiki/pub/Sandbox/AtmelSerialRenamePatch/at91_serial-to-atmel_serial-internal-names.patch instead of including it here. Haavard ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL 2006-09-27 16:58 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns Haavard Skinnemoen 2006-09-28 9:03 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Andrew Victor 2006-09-28 9:02 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Andrew Victor 1 sibling, 2 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen The at91_serial driver can be used with both AT32 and AT91 devices from Atmel and has therefore been renamed atmel_serial. The only thing left is to rename PORT_AT91 PORT_ATMEL. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/atmel_serial.c | 6 +++--- include/linux/serial_core.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 9cfa63d..420921d 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -581,7 +581,7 @@ static void atmel_set_termios(struct uar */ static const char *atmel_type(struct uart_port *port) { - return (port->type == PORT_AT91) ? "ATMEL_SERIAL" : NULL; + return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; } /* @@ -628,7 +628,7 @@ static int atmel_request_port(struct uar static void atmel_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AT91; + port->type = PORT_ATMEL; atmel_request_port(port); } } @@ -639,7 +639,7 @@ static void atmel_config_port(struct uar static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91) + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) ret = -EINVAL; if (port->irq != ser->irq) ret = -EINVAL; diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 86501a3..e5c44aa 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -67,8 +67,8 @@ #define PORT_DZ 47 /* Parisc type numbers. */ #define PORT_MUX 48 -/* Atmel AT91xxx SoC */ -#define PORT_AT91 49 +/* Atmel AT91 / AT32 SoC */ +#define PORT_ATMEL 49 /* Macintosh Zilog type numbers */ #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-27 16:58 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Haavard Skinnemoen @ 2006-09-27 16:58 ` Haavard Skinnemoen 2006-09-28 9:21 ` Andrew Victor 2006-09-28 9:03 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Andrew Victor 1 sibling, 1 reply; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-27 16:58 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel, hskinnemoen at91_register_uart_fns has no users as far as I can see. Let's get rid of it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/atmel_serial.c | 41 ---------------------------------- include/asm-arm/mach/serial_at91.h | 33 --------------------------- include/asm-avr32/mach/serial_at91.h | 33 --------------------------- 3 files changed, 0 insertions(+), 107 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 420921d..ae29b78 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -37,7 +37,6 @@ #include <linux/platform_device.h> #include <asm/io.h> #include <asm/arch/at91rm9200_pdc.h> -#include <asm/mach/serial_at91.h> #include <asm/arch/board.h> #include <asm/arch/system.h> #include <asm/arch/gpio.h> @@ -101,9 +100,6 @@ #define UART_PUT_TCR(port,v) writel(v, ( //#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNPR) //#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNCR) -static int (*at91_open)(struct uart_port *); -static void (*at91_close)(struct uart_port *); - /* * We wrap our port structure around the generic uart_port. */ @@ -396,18 +392,6 @@ static int atmel_startup(struct uart_por } /* - * If there is a specific "open" function (to register - * control line interrupts) - */ - if (at91_open) { - retval = at91_open(port); - if (retval) { - free_irq(port->irq, port); - return retval; - } - } - - /* * Finally, enable the serial port */ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); @@ -435,13 +419,6 @@ static void atmel_shutdown(struct uart_p * Free the interrupt */ free_irq(port->irq, port); - - /* - * If there is a specific "close" function (to unregister - * control line interrupts) - */ - if (at91_close) - at91_close(port); } /* @@ -708,24 +685,6 @@ static void __devinit atmel_init_port(st } } -/* - * Register board-specific modem-control line handlers. - */ -void __init at91_register_uart_fns(struct at91_port_fns *fns) -{ - if (fns->enable_ms) - atmel_pops.enable_ms = fns->enable_ms; - if (fns->get_mctrl) - atmel_pops.get_mctrl = fns->get_mctrl; - if (fns->set_mctrl) - atmel_pops.set_mctrl = fns->set_mctrl; - at91_open = fns->open; - at91_close = fns->close; - atmel_pops.pm = fns->pm; - atmel_pops.set_wake = fns->set_wake; -} - - #ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void atmel_console_putchar(struct uart_port *port, int ch) { diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h deleted file mode 100644 index 239e1f6..0000000 --- a/include/asm-arm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct at91_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void at91_register_uart_fns(struct at91_port_fns *fns); -#else -#define at91_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h deleted file mode 100644 index 239e1f6..0000000 --- a/include/asm-avr32/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct at91_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void at91_register_uart_fns(struct at91_port_fns *fns); -#else -#define at91_register_uart_fns(fns) do { } while (0) -#endif - - -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-27 16:58 ` [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns Haavard Skinnemoen @ 2006-09-28 9:21 ` Andrew Victor 2006-09-28 9:38 ` Haavard Skinnemoen 0 siblings, 1 reply; 27+ messages in thread From: Andrew Victor @ 2006-09-28 9:21 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel hi Haavard, > at91_register_uart_fns has no users as far as I can see. Let's get > rid of it. No. It is being used. This interface is used to register board-specific functions that can be use to control the serial port modem-control lines. For example, the AT91RM9200 only provides the full modem-control signals on USART1. If you need the modem-control signals for any of the other ports you need to drive some of the GPIO pins manually. So you need this hook back into your board-specific file to do that. Regards, Andrew Victor ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-28 9:21 ` Andrew Victor @ 2006-09-28 9:38 ` Haavard Skinnemoen 2006-09-28 11:14 ` Andrew Victor 0 siblings, 1 reply; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-28 9:38 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel On 28 Sep 2006 11:21:55 +0200 Andrew Victor <andrew@sanpeople.com> wrote: > hi Haavard, > > > at91_register_uart_fns has no users as far as I can see. Let's get > > rid of it. > > No. It is being used. > > This interface is used to register board-specific functions that can > be use to control the serial port modem-control lines. > > For example, the AT91RM9200 only provides the full modem-control > signals on USART1. If you need the modem-control signals for any of > the other ports you need to drive some of the GPIO pins manually. So > you need this hook back into your board-specific file to do that. Ok, I sort of suspected that. But I can't see any users in the kernel tree, so perhaps we should leave the name of the function alone too? (i.e. just drop the patch) Haavard ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-28 9:38 ` Haavard Skinnemoen @ 2006-09-28 11:14 ` Andrew Victor 2006-09-28 11:51 ` Haavard Skinnemoen 0 siblings, 1 reply; 27+ messages in thread From: Andrew Victor @ 2006-09-28 11:14 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel hi Haavard, > Ok, I sort of suspected that. But I can't see any users in the kernel > tree, so perhaps we should leave the name of the function alone too? > (i.e. just drop the patch) For consistency, the function name should be renamed (at91 -> atmel). I'm not up-to-date with the features of the AVR32-based boards, but this functionality might also be useful there. Out-of-mainline users will just have to update their patches. :) Regards, Andrew Victor ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-28 11:14 ` Andrew Victor @ 2006-09-28 11:51 ` Haavard Skinnemoen 2006-09-28 11:56 ` Andrew Victor 0 siblings, 1 reply; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-28 11:51 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel On 28 Sep 2006 13:14:09 +0200 Andrew Victor <andrew@sanpeople.com> wrote: > hi Haavard, > > > Ok, I sort of suspected that. But I can't see any users in the > > kernel tree, so perhaps we should leave the name of the function > > alone too? (i.e. just drop the patch) > > For consistency, the function name should be renamed (at91 -> atmel). > I'm not up-to-date with the features of the AVR32-based boards, but > this functionality might also be useful there. > > Out-of-mainline users will just have to update their patches. :) Ok, here's a patch that does that. I've renamed at91_open and at91_close to atmel_open_hook and atmel_close_hook as well to make it more clear what they really are. Haavard --- From: Haavard Skinnemoen <hskinnemoen@atmel.com> Subject: [PATCH] atmel_serial: Rename at91_register_uart_fns Rename at91_register_uart_fns and associated structs and variables to make it consistent with the atmel_ prefix used by the rest of the driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- drivers/serial/atmel_serial.c | 18 +++++++++--------- include/asm-arm/mach/serial_at91.h | 6 +++--- include/asm-avr32/mach/serial_at91.h | 6 +++--- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 43393de..4625541 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -101,8 +101,8 @@ #define UART_PUT_TCR(port,v) writel(v, ( //#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNPR) //#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNCR) -static int (*at91_open)(struct uart_port *); -static void (*at91_close)(struct uart_port *); +static int (*atmel_open_hook)(struct uart_port *); +static void (*atmel_close_hook)(struct uart_port *); /* * We wrap our port structure around the generic uart_port. @@ -399,8 +399,8 @@ static int atmel_startup(struct uart_por * If there is a specific "open" function (to register * control line interrupts) */ - if (at91_open) { - retval = at91_open(port); + if (atmel_open_hook) { + retval = atmel_open_hook(port); if (retval) { free_irq(port->irq, port); return retval; @@ -440,8 +440,8 @@ static void atmel_shutdown(struct uart_p * If there is a specific "close" function (to unregister * control line interrupts) */ - if (at91_close) - at91_close(port); + if (atmel_close_hook) + atmel_close_hook(port); } /* @@ -711,7 +711,7 @@ static void __devinit atmel_init_port(st /* * Register board-specific modem-control line handlers. */ -void __init at91_register_uart_fns(struct at91_port_fns *fns) +void __init atmel_register_uart_fns(struct atmel_port_fns *fns) { if (fns->enable_ms) atmel_pops.enable_ms = fns->enable_ms; @@ -719,8 +719,8 @@ void __init at91_register_uart_fns(struc atmel_pops.get_mctrl = fns->get_mctrl; if (fns->set_mctrl) atmel_pops.set_mctrl = fns->set_mctrl; - at91_open = fns->open; - at91_close = fns->close; + atmel_open_hook = fns->open; + atmel_close_hook = fns->close; atmel_pops.pm = fns->pm; atmel_pops.set_wake = fns->set_wake; } diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h index 239e1f6..55b317a 100644 --- a/include/asm-arm/mach/serial_at91.h +++ b/include/asm-arm/mach/serial_at91.h @@ -14,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91_port_fns { +struct atmel_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -25,9 +25,9 @@ struct at91_port_fns { }; #if defined(CONFIG_SERIAL_ATMEL) -void at91_register_uart_fns(struct at91_port_fns *fns); +void atmel_register_uart_fns(struct atmel_port_fns *fns); #else -#define at91_register_uart_fns(fns) do { } while (0) +#define atmel_register_uart_fns(fns) do { } while (0) #endif diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h index 239e1f6..55b317a 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/include/asm-avr32/mach/serial_at91.h @@ -14,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91_port_fns { +struct atmel_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -25,9 +25,9 @@ struct at91_port_fns { }; #if defined(CONFIG_SERIAL_ATMEL) -void at91_register_uart_fns(struct at91_port_fns *fns); +void atmel_register_uart_fns(struct atmel_port_fns *fns); #else -#define at91_register_uart_fns(fns) do { } while (0) +#define atmel_register_uart_fns(fns) do { } while (0) #endif -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-28 11:51 ` Haavard Skinnemoen @ 2006-09-28 11:56 ` Andrew Victor 2006-09-28 17:02 ` Sam Ravnborg 0 siblings, 1 reply; 27+ messages in thread From: Andrew Victor @ 2006-09-28 11:56 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Rename at91_register_uart_fns and associated structs and variables > to make it consistent with the atmel_ prefix used by the rest of > the driver. > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns 2006-09-28 11:56 ` Andrew Victor @ 2006-09-28 17:02 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2006-09-28 17:02 UTC (permalink / raw) To: Andrew Victor; +Cc: Haavard Skinnemoen, Russell King, linux-kernel On Thu, Sep 28, 2006 at 01:56:48PM +0200, Andrew Victor wrote: > > > Rename at91_register_uart_fns and associated structs and variables > > to make it consistent with the atmel_ prefix used by the rest of > > the driver. > > > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> > > Signed-off-by: Andrew Victor <andrew@sanpeople.com> You Sign-off a path when it passes through your hands. You acknowledge a path by Acked-by: xxx when you acknowledge a path. You are no the only one that get this wrong... Sam ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL 2006-09-27 16:58 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns Haavard Skinnemoen @ 2006-09-28 9:03 ` Andrew Victor 1 sibling, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 9:03 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > The at91_serial driver can be used with both AT32 and AT91 devices > from Atmel and has therefore been renamed atmel_serial. The only > thing left is to rename PORT_AT91 PORT_ATMEL. > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 6/8] at91_serial -> atmel_serial: Internal names 2006-09-27 16:58 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Haavard Skinnemoen @ 2006-09-28 9:02 ` Andrew Victor 1 sibling, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 9:02 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Prefix all internal functions and variables with atmel_ instead of > at91_. > > The at91_register_uart_fns() stuff is left as is since I can't find > any actual users of it. > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 5/8] at91_serial -> atmel_serial: Public definitions 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Haavard Skinnemoen @ 2006-09-28 8:54 ` Andrew Victor 2006-09-28 9:24 ` Haavard Skinnemoen 1 sibling, 1 reply; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:54 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel hi Haavard, > Rename the following public definitions: > * AT91_NR_UART -> ATMEL_NR_UART Can you possible rather rename it to ATMEL_MAX_UART ? Since most AT91 board don't use all the UART's I've had a few reports of people trying to limit the number of UART's "detected" by changing this value - which of course can break things. (They should be changing the number of UARTs in their board-support files). Regards, Andrew Victor ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 5/8] at91_serial -> atmel_serial: Public definitions 2006-09-28 8:54 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Andrew Victor @ 2006-09-28 9:24 ` Haavard Skinnemoen 2006-09-28 9:22 ` Andrew Victor 0 siblings, 1 reply; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-28 9:24 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel On 28 Sep 2006 10:54:04 +0200 Andrew Victor <andrew@sanpeople.com> wrote: > hi Haavard, > > > Rename the following public definitions: > > * AT91_NR_UART -> ATMEL_NR_UART > > Can you possible rather rename it to ATMEL_MAX_UART ? > > Since most AT91 board don't use all the UART's I've had a few reports > of people trying to limit the number of UART's "detected" by changing > this value - which of course can break things. (They should be > changing the number of UARTs in their board-support files). Sure. Here's an updated patch. This causes trivial rejects in a couple of the other patches. Haavard From: Haavard Skinnemoen <hskinnemoen@atmel.com> Subject: [PATCH] at91_serial -> atmel_serial: Public definitions Rename the following public definitions: * AT91_NR_UART -> ATMEL_MAX_UART * struct at91_uart_data -> struct atmel_uart_data * at91_default_console_device -> atmel_default_console_device Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- arch/arm/mach-at91rm9200/devices.c | 22 +++++++++++----------- arch/avr32/mach-at32ap/at32ap7000.c | 4 ++-- drivers/serial/atmel_serial.c | 14 +++++++------- include/asm-arm/arch-at91rm9200/board.h | 4 ++-- include/asm-arm/arch-at91rm9200/hardware.h | 2 +- include/asm-avr32/arch-at32ap/board.h | 4 ++-- 6 files changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 78d6a1a..b8c0344 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -558,7 +558,7 @@ static struct resource dbgu_resources[] }, }; -static struct at91_uart_data dbgu_data = { +static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ }; @@ -593,7 +593,7 @@ static struct resource uart0_resources[] }, }; -static struct at91_uart_data uart0_data = { +static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -635,7 +635,7 @@ static struct resource uart1_resources[] }, }; -static struct at91_uart_data uart1_data = { +static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -676,7 +676,7 @@ static struct resource uart2_resources[] }, }; -static struct at91_uart_data uart2_data = { +static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -711,7 +711,7 @@ static struct resource uart3_resources[] }, }; -static struct at91_uart_data uart3_data = { +static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -733,8 +733,8 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ } -struct platform_device *at91_uarts[AT91_NR_UART]; /* the UARTs to use */ -struct platform_device *at91_default_console_device; /* the serial console device */ +struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) { @@ -775,9 +775,9 @@ void __init at91_init_serial(struct at91 } /* Set serial console device */ - if (config->console_tty < AT91_NR_UART) - at91_default_console_device = at91_uarts[config->console_tty]; - if (!at91_default_console_device) + if (config->console_tty < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) printk(KERN_INFO "AT91: No default serial console defined.\n"); } @@ -785,7 +785,7 @@ void __init at91_add_device_serial(void) { int i; - for (i = 0; i < AT91_NR_UART; i++) { + for (i = 0; i < ATMEL_MAX_UART; i++) { if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index aca7890..536bc88 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -615,11 +615,11 @@ struct platform_device *__init at32_add_ return pdev; } -struct platform_device *at91_default_console_device; +struct platform_device *atmel_default_console_device; void __init at32_setup_serial_console(unsigned int usart_id) { - at91_default_console_device = setup_usart(usart_id); + atmel_default_console_device = setup_usart(usart_id); } /* -------------------------------------------------------------------- diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index b5f9e31..41cb844 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -113,7 +113,7 @@ struct at91_uart_port { unsigned short suspended; /* is port suspended? */ }; -static struct at91_uart_port at91_ports[AT91_NR_UART]; +static struct at91_uart_port at91_ports[ATMEL_MAX_UART]; #ifdef SUPPORT_SYSRQ static struct console at91_console; @@ -682,7 +682,7 @@ static struct uart_ops at91_pops = { static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev) { struct uart_port *port = &at91_port->uart; - struct at91_uart_data *data = pdev->dev.platform_data; + struct atmel_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; @@ -834,9 +834,9 @@ #define AT91_CONSOLE_DEVICE &at91_consol */ static int __init at91_console_init(void) { - if (at91_default_console_device) { - add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL); - at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device); + if (atmel_default_console_device) { + add_preferred_console(AT91_DEVICENAME, atmel_default_console_device->id, NULL); + at91_init_port(&(at91_ports[atmel_default_console_device->id]), atmel_default_console_device); register_console(&at91_console); } @@ -849,7 +849,7 @@ console_initcall(at91_console_init); */ static int __init at91_late_console_init(void) { - if (at91_default_console_device && !(at91_console.flags & CON_ENABLED)) + if (atmel_default_console_device && !(at91_console.flags & CON_ENABLED)) register_console(&at91_console); return 0; @@ -866,7 +866,7 @@ static struct uart_driver at91_uart = { .dev_name = AT91_DEVICENAME, .major = SERIAL_AT91_MAJOR, .minor = MINOR_START, - .nr = AT91_NR_UART, + .nr = ATMEL_MAX_UART, .cons = AT91_CONSOLE_DEVICE, }; diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index c1ca9a4..d565270 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -97,10 +97,10 @@ struct at91_uart_config { unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; -extern struct platform_device *at91_default_console_device; +extern struct platform_device *atmel_default_console_device; extern void __init at91_init_serial(struct at91_uart_config *config); -struct at91_uart_data { +struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ }; diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 235d39d..d1e607d 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -57,7 +57,7 @@ #define AT91_SRAM_SIZE 0x00004000 /* In #define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) /* Serial ports */ -#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ +#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */ /* FLASH */ #define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 39368e1..82e5404 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -9,8 +9,8 @@ #include <linux/types.h> /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -#define AT91_NR_UART 4 -extern struct platform_device *at91_default_console_device; +#define ATMEL_MAX_UART 4 +extern struct platform_device *atmel_default_console_device; struct platform_device *at32_add_device_usart(unsigned int id); -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 5/8] at91_serial -> atmel_serial: Public definitions 2006-09-28 9:24 ` Haavard Skinnemoen @ 2006-09-28 9:22 ` Andrew Victor 0 siblings, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 9:22 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Rename the following public definitions: > * AT91_NR_UART -> ATMEL_MAX_UART > * struct at91_uart_data -> struct atmel_uart_data > * at91_default_console_device -> atmel_default_console_device > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/8] at91_serial -> atmel_serial: Platform device name 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen @ 2006-09-28 8:35 ` Andrew Victor 2006-09-28 12:55 ` Haavard Skinnemoen 2 siblings, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:35 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Rename the "at91_usart" platform driver "atmel_usart" and update > platform devices accordingly. > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/8] at91_serial -> atmel_serial: Platform device name 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen 2006-09-28 8:35 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Andrew Victor @ 2006-09-28 12:55 ` Haavard Skinnemoen 2 siblings, 0 replies; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-28 12:55 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Andrew Victor, Russell King, linux-kernel On Wed, 27 Sep 2006 18:58:01 +0200 Haavard Skinnemoen <hskinnemoen@atmel.com> wrote: > Rename the "at91_usart" platform driver "atmel_usart" and update > platform devices accordingly. Hmm...seems like I've been too busy testing things on ARM, because this one breaks AVR32 ;-) Updated patch below. No ARM- or at91_serial-related stuff is changed. Haavard --- From: Haavard Skinnemoen <hskinnemoen@atmel.com> Subject: [PATCH] at91_serial -> atmel_serial: Platform device name Rename the "at91_usart" platform driver "atmel_usart" and update platform devices accordingly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> --- arch/arm/mach-at91rm9200/devices.c | 10 ++++----- arch/avr32/mach-at32ap/at32ap7000.c | 40 ++++++++++++++++++----------------- drivers/serial/atmel_serial.c | 2 +- 3 files changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 467ef6d..78d6a1a 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -564,7 +564,7 @@ static struct at91_uart_data dbgu_data = }; static struct platform_device at91rm9200_dbgu_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 0, .dev = { .platform_data = &dbgu_data, @@ -599,7 +599,7 @@ static struct at91_uart_data uart0_data }; static struct platform_device at91rm9200_uart0_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 1, .dev = { .platform_data = &uart0_data, @@ -641,7 +641,7 @@ static struct at91_uart_data uart1_data }; static struct platform_device at91rm9200_uart1_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 2, .dev = { .platform_data = &uart1_data, @@ -682,7 +682,7 @@ static struct at91_uart_data uart2_data }; static struct platform_device at91rm9200_uart2_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 3, .dev = { .platform_data = &uart2_data, @@ -717,7 +717,7 @@ static struct at91_uart_data uart3_data }; static struct platform_device at91rm9200_uart3_device = { - .name = "at91_usart", + .name = "atmel_usart", .id = 4, .dev = { .platform_data = &uart3_data, diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 37982b6..842e7be 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -523,33 +523,33 @@ void __init at32_add_system_devices(void * USART * -------------------------------------------------------------------- */ -static struct resource usart0_resource[] = { +static struct resource atmel_usart0_resource[] = { PBMEM(0xffe00c00), IRQ(7), }; -DEFINE_DEV(usart, 0); -DEV_CLK(usart, usart0, pba, 4); +DEFINE_DEV(atmel_usart, 0); +DEV_CLK(usart, atmel_usart0, pba, 4); -static struct resource usart1_resource[] = { +static struct resource atmel_usart1_resource[] = { PBMEM(0xffe01000), IRQ(7), }; -DEFINE_DEV(usart, 1); -DEV_CLK(usart, usart1, pba, 4); +DEFINE_DEV(atmel_usart, 1); +DEV_CLK(usart, atmel_usart1, pba, 4); -static struct resource usart2_resource[] = { +static struct resource atmel_usart2_resource[] = { PBMEM(0xffe01400), IRQ(8), }; -DEFINE_DEV(usart, 2); -DEV_CLK(usart, usart2, pba, 5); +DEFINE_DEV(atmel_usart, 2); +DEV_CLK(usart, atmel_usart2, pba, 5); -static struct resource usart3_resource[] = { +static struct resource atmel_usart3_resource[] = { PBMEM(0xffe01800), IRQ(9), }; -DEFINE_DEV(usart, 3); -DEV_CLK(usart, usart3, pba, 6); +DEFINE_DEV(atmel_usart, 3); +DEV_CLK(usart, atmel_usart3, pba, 6); static inline void configure_usart0_pins(void) { @@ -581,19 +581,19 @@ static struct platform_device *setup_usa switch (id) { case 0: - pdev = &usart0_device; + pdev = &atmel_usart0_device; configure_usart0_pins(); break; case 1: - pdev = &usart1_device; + pdev = &atmel_usart1_device; configure_usart1_pins(); break; case 2: - pdev = &usart2_device; + pdev = &atmel_usart2_device; configure_usart2_pins(); break; case 3: - pdev = &usart3_device; + pdev = &atmel_usart3_device; configure_usart3_pins(); break; default: @@ -813,10 +813,10 @@ struct clk *at32_clock_list[] = { &pio1_mck, &pio2_mck, &pio3_mck, - &usart0_usart, - &usart1_usart, - &usart2_usart, - &usart3_usart, + &atmel_usart0_usart, + &atmel_usart1_usart, + &atmel_usart2_usart, + &atmel_usart3_usart, &macb0_hclk, &macb0_pclk, &spi0_mck, diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index e33caa9..b5f9e31 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -947,7 +947,7 @@ static struct platform_driver at91_seria .suspend = at91_serial_suspend, .resume = at91_serial_resume, .driver = { - .name = "at91_usart", + .name = "atmel_usart", .owner = THIS_MODULE, }, }; -- 1.4.1.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols 2006-09-27 16:58 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen @ 2006-09-28 8:34 ` Andrew Victor 2006-09-28 8:54 ` Haavard Skinnemoen 1 sibling, 1 reply; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:34 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel hi Haavard, > Rename the following Kconfig symbols: > * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL > * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE > * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT > -config SERIAL_AT91 > - bool "AT91RM9200 / AT91SAM9261 serial port support" > +config SERIAL_ATMEL > + bool "AT91 / AT32 on-chip serial port support" > depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) > select SERIAL_CORE > help > This enables the driver for the on-chip UARTs of the Atmel > AT91RM9200 and AT91SAM926 processor. Shouldn't this dependency be: depends on (ARM && ARCH_AT91) || AVR32 (The "ARCH_AT91RM9200 || ARCH_AT91SAM9261" can be replaced with ARCH_AT91 since the driver should usable on the RM9200, SAM9261 and SAM9260) The help text should probably also be updated for these 3 options so that it mentions the AVR32. Regards, Andrew Victor ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols 2006-09-28 8:34 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Andrew Victor @ 2006-09-28 8:54 ` Haavard Skinnemoen 2006-09-28 8:50 ` Andrew Victor 0 siblings, 1 reply; 27+ messages in thread From: Haavard Skinnemoen @ 2006-09-28 8:54 UTC (permalink / raw) To: Andrew Victor; +Cc: Russell King, linux-kernel On 28 Sep 2006 10:34:49 +0200 Andrew Victor <andrew@sanpeople.com> wrote: > hi Haavard, > > > Rename the following Kconfig symbols: > > * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL > > * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE > > * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT > > > > -config SERIAL_AT91 > > - bool "AT91RM9200 / AT91SAM9261 serial port support" > > +config SERIAL_ATMEL > > + bool "AT91 / AT32 on-chip serial port support" > > depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) > > select SERIAL_CORE > > help > > This enables the driver for the on-chip UARTs of the > > Atmel AT91RM9200 and AT91SAM926 processor. > > Shouldn't this dependency be: > depends on (ARM && ARCH_AT91) || AVR32 > > (The "ARCH_AT91RM9200 || ARCH_AT91SAM9261" can be replaced with > ARCH_AT91 since the driver should usable on the RM9200, SAM9261 and > SAM9260) Oh, I didn't know that symbol existed. I just looked at the serial Kconfig, not arch/arm/Kconfig. You're right of course. > The help text should probably also be updated for these 3 options so > that it mentions the AVR32. Right. Probably shouldn't have changed the prompt -- I have a different patch that actually adds AVR32 support (I don't want to do that before it actually compiles on AVR32, in case some crazy person comes along and tries out allyesconfig ;) Is it OK if I keep the patch as it is and change the dependency and help text in a later patch? Haavard ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols 2006-09-28 8:54 ` Haavard Skinnemoen @ 2006-09-28 8:50 ` Andrew Victor 0 siblings, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:50 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel hi Haavard, > Right. Probably shouldn't have changed the prompt -- I have a different > patch that actually adds AVR32 support (I don't want to do that before > it actually compiles on AVR32, in case some crazy person comes along > and tries out allyesconfig ;) > > Is it OK if I keep the patch as it is and change the dependency and > help text in a later patch? That's would be fine - the current patch won't affect the AT91 support. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Regards, Andrew Victor ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c 2006-09-27 16:57 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Haavard Skinnemoen @ 2006-09-28 8:22 ` Andrew Victor 1 sibling, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:22 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Rename at91_serial.c atmel_serial.c > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h 2006-09-27 16:57 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Haavard Skinnemoen 2006-09-27 16:57 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Haavard Skinnemoen @ 2006-09-28 8:20 ` Andrew Victor 1 sibling, 0 replies; 27+ messages in thread From: Andrew Victor @ 2006-09-28 8:20 UTC (permalink / raw) To: Haavard Skinnemoen; +Cc: Russell King, linux-kernel > Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename > it atmel_usart.h. Also delete AVR32's version of this file. > > Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2006-09-28 17:02 UTC | newest] Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-09-27 16:57 [PATCH 0/8] Rename at91_serial driver as atmel_serial Haavard Skinnemoen 2006-09-27 16:57 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Haavard Skinnemoen 2006-09-27 16:57 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Haavard Skinnemoen 2006-09-27 16:58 ` [PATCH 8/8] atmel_serial: Kill at91_register_uart_fns Haavard Skinnemoen 2006-09-28 9:21 ` Andrew Victor 2006-09-28 9:38 ` Haavard Skinnemoen 2006-09-28 11:14 ` Andrew Victor 2006-09-28 11:51 ` Haavard Skinnemoen 2006-09-28 11:56 ` Andrew Victor 2006-09-28 17:02 ` Sam Ravnborg 2006-09-28 9:03 ` [PATCH 7/8] serial: Rename PORT_AT91 -> PORT_ATMEL Andrew Victor 2006-09-28 9:02 ` [PATCH 6/8] at91_serial -> atmel_serial: Internal names Andrew Victor 2006-09-28 8:54 ` [PATCH 5/8] at91_serial -> atmel_serial: Public definitions Andrew Victor 2006-09-28 9:24 ` Haavard Skinnemoen 2006-09-28 9:22 ` Andrew Victor 2006-09-28 8:35 ` [PATCH 4/8] at91_serial -> atmel_serial: Platform device name Andrew Victor 2006-09-28 12:55 ` Haavard Skinnemoen 2006-09-28 8:34 ` [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Andrew Victor 2006-09-28 8:54 ` Haavard Skinnemoen 2006-09-28 8:50 ` Andrew Victor 2006-09-28 8:22 ` [PATCH 2/8] at91_serial -> atmel_serial: at91_serial.c Andrew Victor 2006-09-28 8:20 ` [PATCH 1/8] at91_serial -> atmel_serial: at91rm9200_usart.h Andrew Victor
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).