linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: Keyboard Stuttering
@ 2006-10-06 10:18 David Gerber
  2006-10-06 20:24 ` Frank Sorenson
  2006-10-10 17:09 ` Dmitry Torokhov
  0 siblings, 2 replies; 9+ messages in thread
From: David Gerber @ 2006-10-06 10:18 UTC (permalink / raw)
  To: Frank Sorenson; +Cc: linux-kernel

> I'm experiencing some severe keyboard stuttering on my laptop.  The 
> problem is particularly bad in X, and I believe it also occurs at the 
> console, though I'm having a difficult time verifying that.  The problem 
> shows up as repeated characters (not regular key-repeat-related), and 
> sometimes dropped key presses.

(I'm not subscribed to the list, CC: to me if needed)

Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on 
2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU 
core of course.

I cannot reproduce the problem within the console nor gdm. Only on the X 
desktop.

dmesg and dmidecode outputs are available at:
http://zapek.com/misc/9400_dmesg
http://zapek.com/misc/9400_dmidecode
This is a Dell Inspiron 9400.

-- 
Dave - http://zapek.com/

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-06 10:18 Keyboard Stuttering David Gerber
@ 2006-10-06 20:24 ` Frank Sorenson
  2006-10-10 17:09 ` Dmitry Torokhov
  1 sibling, 0 replies; 9+ messages in thread
From: Frank Sorenson @ 2006-10-06 20:24 UTC (permalink / raw)
  To: David Gerber; +Cc: linux-kernel

David Gerber wrote:
>> I'm experiencing some severe keyboard stuttering on my laptop.  The 
>> problem is particularly bad in X, and I believe it also occurs at the 
>> console, though I'm having a difficult time verifying that.  The problem 
>> shows up as repeated characters (not regular key-repeat-related), and 
>> sometimes dropped key presses.
> 
> (I'm not subscribed to the list, CC: to me if needed)
> 
> Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on 
> 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU 
> core of course.
> 
> I cannot reproduce the problem within the console nor gdm. Only on the X 
> desktop.
> 
> dmesg and dmidecode outputs are available at:
> http://zapek.com/misc/9400_dmesg
> http://zapek.com/misc/9400_dmidecode
> This is a Dell Inspiron 9400.
> 

The Dell Inspiron 9400 and Inspiron E1705 are pretty much the same 
laptop.  I'm glad to hear it's not just my keyboard or anything like that.

It sounds like there are several others who are experiencing the same or 
related issues.

Is there a way to change the interrupt trigger for the keyboard (the 
other devices seem to work just fine)?  Is there a way to force i8042 to 
XT-PIC on interrupt 1, to see whether it's related to the interrupt 
trigger, or something else that just looks similar?  Any other ideas for 
debugging or fixing?

I'd really love not to have to do the noapic or nolapic workaround...

Frank


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-06 10:18 Keyboard Stuttering David Gerber
  2006-10-06 20:24 ` Frank Sorenson
@ 2006-10-10 17:09 ` Dmitry Torokhov
  2006-10-10 18:25   ` john stultz
  1 sibling, 1 reply; 9+ messages in thread
From: Dmitry Torokhov @ 2006-10-10 17:09 UTC (permalink / raw)
  To: John Stultz; +Cc: Frank Sorenson, linux-kernel, David Gerber

On 10/6/06, David Gerber <dg-lkml@zapek.com> wrote:
> > I'm experiencing some severe keyboard stuttering on my laptop.  The
> > problem is particularly bad in X, and I believe it also occurs at the
> > console, though I'm having a difficult time verifying that.  The problem
> > shows up as repeated characters (not regular key-repeat-related), and
> > sometimes dropped key presses.
>
> (I'm not subscribed to the list, CC: to me if needed)
>
> Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on
> 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU
> core of course.
>
> I cannot reproduce the problem within the console nor gdm. Only on the X
> desktop.
>

John,

It looks like the only clocksource available on David's box is
"jiffies" although the processor shows that it supporst tsc and PM
timer is enabled and I think that this is what causes keyboard
stuttering in X. See http://bugzilla.kernel.org/show_bug.cgi?id=7291.
I believe clocksources is your turf, could you please take a look at
this.

Thanks!

-- 
Dmitry

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-10 17:09 ` Dmitry Torokhov
@ 2006-10-10 18:25   ` john stultz
  2006-10-12 16:12     ` Lee Revell
  0 siblings, 1 reply; 9+ messages in thread
From: john stultz @ 2006-10-10 18:25 UTC (permalink / raw)
  To: Dmitry Torokhov; +Cc: Frank Sorenson, linux-kernel, David Gerber

On Tue, 2006-10-10 at 13:09 -0400, Dmitry Torokhov wrote:
> On 10/6/06, David Gerber <dg-lkml@zapek.com> wrote:
> > > I'm experiencing some severe keyboard stuttering on my laptop.  The
> > > problem is particularly bad in X, and I believe it also occurs at the
> > > console, though I'm having a difficult time verifying that.  The problem
> > > shows up as repeated characters (not regular key-repeat-related), and
> > > sometimes dropped key presses.
> >
> > (I'm not subscribed to the list, CC: to me if needed)
> >
> > Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on
> > 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU
> > core of course.
> >
> > I cannot reproduce the problem within the console nor gdm. Only on the X
> > desktop.
> >
> 
> John,
> 
> It looks like the only clocksource available on David's box is
> "jiffies" although the processor shows that it supporst tsc and PM
> timer is enabled and I think that this is what causes keyboard
> stuttering in X. See http://bugzilla.kernel.org/show_bug.cgi?id=7291.
> I believe clocksources is your turf, could you please take a look at
> this.

Sure thing. I followed up in the bug, but I don't think the clocksource
code is involved. x86_64 hasn't converted to GENERIC_TIME, so jiffies is
what we use to increment xtime, but the TSC, ACPI PM, or HPET is used
for gettimeofday, etc. 

I suspect C3 idling is the culprit, since noapic works around the issue.

thanks
-john


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-10 18:25   ` john stultz
@ 2006-10-12 16:12     ` Lee Revell
  2006-10-13 20:45       ` john stultz
  0 siblings, 1 reply; 9+ messages in thread
From: Lee Revell @ 2006-10-12 16:12 UTC (permalink / raw)
  To: john stultz; +Cc: Dmitry Torokhov, Frank Sorenson, linux-kernel, David Gerber

On Tue, 2006-10-10 at 11:25 -0700, john stultz wrote:
> On Tue, 2006-10-10 at 13:09 -0400, Dmitry Torokhov wrote:
> > > Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on
> > > 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU
> > > core of course.
> > >
> > > I cannot reproduce the problem within the console nor gdm. Only on the X
> > > desktop.
> > >
> > 
> > John,
> > 
> > It looks like the only clocksource available on David's box is
> > "jiffies" although the processor shows that it supporst tsc and PM
> > timer is enabled and I think that this is what causes keyboard
> > stuttering in X. See http://bugzilla.kernel.org/show_bug.cgi?id=7291.
> > I believe clocksources is your turf, could you please take a look at
> > this.
> 
> Sure thing. I followed up in the bug, but I don't think the clocksource
> code is involved. x86_64 hasn't converted to GENERIC_TIME, so jiffies is
> what we use to increment xtime, but the TSC, ACPI PM, or HPET is used
> for gettimeofday, etc. 
> 
> I suspect C3 idling is the culprit, since noapic works around the issue.

Wait, does this mean that Intel's x86-64 implementation has the same
buggy TSC as AMD's?

Lee


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-12 16:12     ` Lee Revell
@ 2006-10-13 20:45       ` john stultz
  2006-10-16 10:59         ` Andi Kleen
  0 siblings, 1 reply; 9+ messages in thread
From: john stultz @ 2006-10-13 20:45 UTC (permalink / raw)
  To: Lee Revell
  Cc: Dmitry Torokhov, Frank Sorenson, linux-kernel, David Gerber, Andi Kleen

On Thu, 2006-10-12 at 12:12 -0400, Lee Revell wrote:
> On Tue, 2006-10-10 at 11:25 -0700, john stultz wrote:
> > On Tue, 2006-10-10 at 13:09 -0400, Dmitry Torokhov wrote:
> > > > Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on
> > > > 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU
> > > > core of course.
> > > >
> > > > I cannot reproduce the problem within the console nor gdm. Only on the X
> > > > desktop.
> > > >
> > > 
> > > It looks like the only clocksource available on David's box is
> > > "jiffies" although the processor shows that it supporst tsc and PM
> > > timer is enabled and I think that this is what causes keyboard
> > > stuttering in X. See http://bugzilla.kernel.org/show_bug.cgi?id=7291.
> > > I believe clocksources is your turf, could you please take a look at
> > > this.
> > 
> > Sure thing. I followed up in the bug, but I don't think the clocksource
> > code is involved. x86_64 hasn't converted to GENERIC_TIME, so jiffies is
> > what we use to increment xtime, but the TSC, ACPI PM, or HPET is used
> > for gettimeofday, etc. 
> > 
> > I suspect C3 idling is the culprit, since noapic works around the issue.
> 
> Wait, does this mean that Intel's x86-64 implementation has the same
> buggy TSC as AMD's?

Not the same issue, no.. but the TSCs do halt in lower powersaving
modes, which can cause similar results. The new TSC clocksource code on
i386 will disqualify itself if those lower powerstates are entered, so
it should auto detect and fall back. On x86_64, this logic apparently is
sill needed.

thanks
-john



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-13 20:45       ` john stultz
@ 2006-10-16 10:59         ` Andi Kleen
  0 siblings, 0 replies; 9+ messages in thread
From: Andi Kleen @ 2006-10-16 10:59 UTC (permalink / raw)
  To: john stultz
  Cc: Lee Revell, Dmitry Torokhov, Frank Sorenson, linux-kernel, David Gerber

On Friday 13 October 2006 22:45, john stultz wrote:
> On Thu, 2006-10-12 at 12:12 -0400, Lee Revell wrote:
> > On Tue, 2006-10-10 at 11:25 -0700, john stultz wrote:
> > > On Tue, 2006-10-10 at 13:09 -0400, Dmitry Torokhov wrote:
> > > > > Same problem here. Intel Core 2 Duo with 2.6.19-rc1 x86_64 SMP. Happens on
> > > > > 2.6.17 too. I use 'noapic' as a workaround but that disables one of the CPU
> > > > > core of course.
> > > > >
> > > > > I cannot reproduce the problem within the console nor gdm. Only on the X
> > > > > desktop.
> > > > >
> > > > 
> > > > It looks like the only clocksource available on David's box is
> > > > "jiffies" although the processor shows that it supporst tsc and PM
> > > > timer is enabled and I think that this is what causes keyboard
> > > > stuttering in X. See http://bugzilla.kernel.org/show_bug.cgi?id=7291.
> > > > I believe clocksources is your turf, could you please take a look at
> > > > this.
> > > 
> > > Sure thing. I followed up in the bug, but I don't think the clocksource
> > > code is involved. x86_64 hasn't converted to GENERIC_TIME, so jiffies is
> > > what we use to increment xtime, but the TSC, ACPI PM, or HPET is used
> > > for gettimeofday, etc. 
> > > 
> > > I suspect C3 idling is the culprit, since noapic works around the issue.
> > 
> > Wait, does this mean that Intel's x86-64 implementation has the same
> > buggy TSC as AMD's?
> 
> Not the same issue, no.. but the TSCs do halt in lower powersaving
> modes, which can cause similar results. The new TSC clocksource code on
> i386 will disqualify itself if those lower powerstates are entered, so
> it should auto detect and fall back. On x86_64, this logic apparently is
> sill needed.

x86-64 has code to not use TSC when there is C3. And special case
code for some big boxes which don't sync the TSC fully.

AFAIK the logic is correct.

There were a few failures, but they were either totally broken BIOS or 
overclocking (some ways of overclocking seem to break the TSC synchronization
on dual die Intel dual core CPUs)

Overclocking is not supported (and those people who want it can use notsc) 
and the broken BIOS cases were all fixed with a BIOS update

-Andi



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Keyboard Stuttering
  2006-10-04 18:15 Frank Sorenson
@ 2006-10-04 20:47 ` Rok Markovic
  0 siblings, 0 replies; 9+ messages in thread
From: Rok Markovic @ 2006-10-04 20:47 UTC (permalink / raw)
  To: LKML

Frank Sorenson wrote:
> I'm experiencing some severe keyboard stuttering on my laptop.  The
> problem is particularly bad in X, and I believe it also occurs at the
> console, though I'm having a difficult time verifying that.  The
> problem  shows up as repeated characters (not regular
> key-repeat-related), and sometimes dropped key presses.
>
> I'm running the 2.6.18 x86_64 kernel on a Core 2 Duo.
>
I have the same problem with keyboard, if i am using smp kernel (P4
3.0-HT). Now i am using uniprocessor kernel 2.6.18 and the problem is
solved. The problem was already in kernel 2.6.16,2.6.17,... more than 5
different versions. Few months ago i was trying to trace the source of
problem but without any success.

Rok



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Keyboard Stuttering
@ 2006-10-04 18:15 Frank Sorenson
  2006-10-04 20:47 ` Rok Markovic
  0 siblings, 1 reply; 9+ messages in thread
From: Frank Sorenson @ 2006-10-04 18:15 UTC (permalink / raw)
  To: LKML

[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]

I'm experiencing some severe keyboard stuttering on my laptop.  The 
problem is particularly bad in X, and I believe it also occurs at the 
console, though I'm having a difficult time verifying that.  The problem 
  shows up as repeated characters (not regular key-repeat-related), and 
sometimes dropped key presses.

I'm running the 2.6.18 x86_64 kernel on a Core 2 Duo.

When I get the extra characters, each one shows under interrupt 1 for 
i8042 in /proc/interrupts, even when only one should show:
            CPU0       CPU1
   0:    4228511    4430136    IO-APIC-edge  timer
   1:       3666       3713    IO-APIC-edge  i8042
   8:          0          0    IO-APIC-edge  rtc
   9:          2          0   IO-APIC-level  acpi
  12:      89035      77993    IO-APIC-edge  i8042
  14:      19246       6894    IO-APIC-edge  libata
  15:      34998      22732    IO-APIC-edge  ide1
  17:       8456          0   IO-APIC-level  eth0
  18:          2          0   IO-APIC-level  ohci1394
  19:       4558       3872   IO-APIC-level  HDA Intel, uhci_hcd:usb3
  20:         23          0   IO-APIC-level  ehci_hcd:usb1, uhci_hcd:usb2
  21:          0          0   IO-APIC-level  uhci_hcd:usb4
  22:          0          0   IO-APIC-level  uhci_hcd:usb5
NMI:       1121        815
LOC:    8658522    8658062
ERR:          0

I have found that "nolapic" will make the keyboard work correctly (using 
XT-PIC), but obviously that has other negative side-effects (such as 
only one processor, etc.).  I've attached a dmesg of boot with a broken 
keyboard (without nolapic).

Has anyone experienced this problem before?  Is there a fix for this
keyboard stuttering?

TThhhaannkss,

Frrannk

[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 31424 bytes --]

Linux version 2.6.18 (root@george.sorensonfamily.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #3 SMP PREEMPT Wed Sep 27 13:50:31 CDT 2006
Command line: ro root=/dev/VolGroup00/RootVol vga=794 apic=verbose
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
 BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
 BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x00000000000fc1b0
ACPI: RSDT (v001 DELL    M07     0x27d6071d ASL  0x00000061) @ 0x000000007fed39cd
ACPI: FADT (v001 DELL    M07     0x27d6071d ASL  0x00000061) @ 0x000000007fed4800
ACPI: MADT (v001 DELL    M07     0x27d6071d ASL  0x00000047) @ 0x000000007fed5000
ACPI: MCFG (v016 DELL    M07     0x27d6071d ASL  0x00000061) @ 0x000000007fed4fc0
ACPI: BOOT (v001 DELL    M07     0x27d6071d ASL  0x00000061) @ 0x000000007fed4bc0
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x000000007fed3a05
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fed3000
Bootmem setup node 0 0000000000000000-000000007fed3000
No mptable found.
On node 0 totalpages: 515695
  DMA zone: 3927 pages, LIFO batch:0
  DMA32 zone: 511768 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fd000 (        fee00000)
mapped IOAPIC to ffffffffff5fc000 (00000000fec00000)
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 32384 bytes of per cpu data
Built 1 zonelists.  Total pages: 515695
Kernel command line: ro root=/dev/VolGroup00/RootVol vga=794 apic=verbose
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 2052396k/2095948k available (3179k kernel code, 43164k reserved, 1443k data, 248k init)
Calibrating delay using timer specific routine.. 4330.61 BogoMIPS (lpj=2165305)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
enabled ExtINT on CPU#0
ESR value after enabling vector: 00000000, after 00000040
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
result 10403067
Detected 10.403 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4326.95 BogoMIPS (lpj=2163475)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2163.840 MHz processor.
migration_cost=26
checking if image is initramfs... it is
Freeing initrd memory: 1608k freed
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:acpi
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PM: Adding info for No Bus:pci0000:00
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:1b.0
PM: Adding info for pci:0000:00:1c.0
PM: Adding info for pci:0000:00:1c.1
PM: Adding info for pci:0000:00:1c.3
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.2
PM: Adding info for pci:0000:00:1d.3
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.2
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:0c:00.0
PM: Adding info for pci:0000:03:00.0
PM: Adding info for pci:0000:03:01.0
PM: Adding info for pci:0000:03:01.1
PM: Adding info for pci:0000:03:01.2
PM: Adding info for pci:0000:03:01.3
PM: Adding info for pci:0000:03:01.4
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
IOAPIC[0]: Set PCI routing entry (2-12 -> 0x89 -> IRQ 12 Mode:0 Active:0)
PM: Adding info for pnp:00:04
IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0)
PM: Adding info for pnp:00:05
IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0)
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0)
PM: Adding info for pnp:00:0a
pnp: PnP ACPI: found 11 devices
Intel 82802 RNG detected
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 00000000
.......    : physical APIC id: 00
.... register #01: 00170020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0020
.... register #02: 00170020
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 000 00  1    0    0   0   0    0    0    39
 02 000 00  0    0    0   0   0    0    0    31
 03 000 00  0    0    0   0   0    0    0    41
 04 000 00  0    0    0   0   0    0    0    49
 05 000 00  0    0    0   0   0    0    0    51
 06 000 00  0    0    0   0   0    0    0    59
 07 000 00  0    0    0   0   0    0    0    61
 08 000 00  1    0    0   0   0    0    0    69
 09 000 00  0    1    0   0   0    0    0    71
 0a 000 00  0    0    0   0   0    0    0    79
 0b 000 00  0    0    0   0   0    0    0    81
 0c 000 00  1    0    0   0   0    0    0    89
 0d 000 00  1    0    0   0   0    0    0    91
 0e 000 00  0    0    0   0   0    0    0    99
 0f 000 00  0    0    0   0   0    0    0    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Bluetooth: Core ver 2.10
PM: Adding info for platform:bluetooth
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI-GART: No AMD northbridge found.
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:03: ioport range 0x1060-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
pnp: 00:08: ioport range 0x910-0x91f has been reserved
pnp: 00:08: ioport range 0x920-0x92f has been reserved
pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
pnp: 00:08: ioport range 0x930-0x97f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: dd000000-dfefffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: dcf00000-dcffffff
  PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:1c.3
  IO window: d000-dfff
  MEM window: dcc00000-dcefffff
  PREFETCH window: d0100000-d03fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: dcb00000-dcbfffff
  PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
GSI 18 sharing vector 0xB9 and IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x79 set to 0x1
audit: initializing netlink socket (disabled)
audit(1159984368.501:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.7)
SELinux:  Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PM: Adding info for pci_express:0000:00:01.0:pcie00
Allocate Port Service[0000:00:01.0:pcie03]
PM: Adding info for pci_express:0000:00:01.0:pcie03
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PM: Adding info for pci_express:0000:00:1c.0:pcie00
Allocate Port Service[0000:00:1c.0:pcie02]
PM: Adding info for pci_express:0000:00:1c.0:pcie02
Allocate Port Service[0000:00:1c.0:pcie03]
PM: Adding info for pci_express:0000:00:1c.0:pcie03
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
PM: Adding info for pci_express:0000:00:1c.1:pcie00
Allocate Port Service[0000:00:1c.1:pcie02]
PM: Adding info for pci_express:0000:00:1c.1:pcie02
Allocate Port Service[0000:00:1c.1:pcie03]
PM: Adding info for pci_express:0000:00:1c.1:pcie03
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PM: Adding info for pci_express:0000:00:1c.3:pcie00
Allocate Port Service[0000:00:1c.3:pcie02]
PM: Adding info for pci_express:0000:00:1c.3:pcie02
Allocate Port Service[0000:00:1c.3:pcie03]
PM: Adding info for pci_express:0000:00:1c.3:pcie03
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
PM: Adding info for platform:vesafb.0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 5120k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (51 C)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:4b:5e:8f
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdc: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac6
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
ata: 0x170 IDE port busy
ata: conflict with ide1
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
ata2: DUMMY
scsi0 : ata_piix
PM: Adding info for No Bus:host0
ata1.00: ATA-7, max UDMA/100, 192426570 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 8
ata1.00: configured for UDMA/100
scsi1 : ata_piix
PM: Adding info for No Bus:host1
PM: Adding info for No Bus:target0:0:0
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72101 MCZO PQ: 0 ANSI: 5
PM: Adding info for scsi:0:0:0:0
SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Losing some ticks... checking if CPU frequency changed.
PM: Adding info for platform:i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.4 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
usbcore: registered new driver bcm203x
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
input: AT Translated Set 2 keyboard as /class/input/input0
GSI 19 sharing vector 0xC1 and IRQ 19
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
  #0: HDA Intel at 0xdfffc000 irq 19
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 248k freed
Write protecting the kernel read-only data: 657k
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
security:  58 classes, 43474 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1159984372.091:2): policy loaded auid=4294967295
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
GSI 20 sharing vector 0xC9 and IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ 20 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
PM: Adding info for No Bus:usbdev1.1_ep81
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
PM: Adding info for No Bus:i2c-0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
bcm43xx driver
PM: Adding info for No Bus:usbdev2.1_ep81
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
GSI 21 sharing vector 0xD1 and IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ieee1394: Initialized config rom entry `ip1394'
PM: Adding info for No Bus:usbdev4.1_ep81
GSI 22 sharing vector 0xD9 and IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
PM: Adding info for usb:usb5
PM: Adding info for No Bus:usbdev5.1_ep00
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for usb:1-1
PM: Adding info for No Bus:usbdev1.2_ep00
usb 1-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-1:1.0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
PM: Adding info for No Bus:usbdev1.2_ep81
PM: Adding info for No Bus:usbdev5.1_ep81
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
bcm43xx: Chip ID 0x4321, rev 0x1
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x12, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0xb, vendor 0x4243, disabled
bcm43xx: Unsupported 80211 core revision 11
bcm43xx: Core 2: ID 0x820, rev 0x2, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x804, rev 0xd, vendor 0x4243, enabled
bcm43xx: Multiple PCI cores found.
bcm43xx: Core 4: ID 0x817, rev 0x4, vendor 0x4243, disabled
bcm43xx: WARNING: Invalid SPROM checksum (0x01, expected: 0xFF)
bcm43xx: Detected PHY: Version: 5, Type 4, Revision 1
bcm43xx: Error: Unknown PHY Type 4
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
PM: Adding info for ieee1394:fw-host0
kobject_add failed for usbdev1.2_ep81 with -EEXIST, don't try to register things with the same name in the same directory.

Call Trace:
BUG: using smp_processor_id() in preemptible [00000001] code: khubd/163
caller is dump_trace+0x22/0x297

Call Trace:
 [<ffffffff8113ab30>] debug_smp_processor_id+0xb4/0xc4
 [<ffffffff8100afe2>] dump_trace+0x22/0x297
 [<ffffffff8100b293>] show_trace+0x3c/0x52
 [<ffffffff8100b2be>] dump_stack+0x15/0x17
 [<ffffffff81135138>] kobject_put+0x19/0x1b
 [<ffffffff811355cf>] kobject_add+0x180/0x1ae
 [<ffffffff811ad25e>] device_add+0xad/0x4db
 [<ffffffff81045ecb>] init_waitqueue_head+0x1f/0x30
 [<ffffffff811ad6a5>] device_register+0x19/0x1e
 [<ffffffff8120f94e>] usb_create_ep_files+0x13a/0x1a0
 [<ffffffff8120f3b1>] usb_create_sysfs_intf_files+0x86/0xa3
 [<ffffffff8120cb1c>] usb_set_configuration+0x3c5/0x40e
 [<ffffffff81208077>] usb_new_device+0x277/0x2da
 [<ffffffff81209263>] hub_thread+0x76c/0xb75
 [<ffffffff8131547a>] _spin_unlock_irq+0x14/0x2e
 [<ffffffff81045c43>] autoremove_wake_function+0x0/0x38
 [<ffffffff8131544a>] _spin_unlock_irqrestore+0x1d/0x39
 [<ffffffff81208af7>] hub_thread+0x0/0xb75
 [<ffffffff81045b1e>] kthread+0xd8/0x10e
 [<ffffffff8102e2a7>] schedule_tail+0x46/0xaf
 [<ffffffff8100aaf8>] child_rip+0xa/0x12
 [<ffffffff81045a46>] kthread+0x0/0x10e
 [<ffffffff8100aaee>] child_rip+0x0/0x12

 [<ffffffff81135138>] kobject_put+0x19/0x1b
 [<ffffffff811355cf>] kobject_add+0x180/0x1ae
 [<ffffffff811ad25e>] device_add+0xad/0x4db
 [<ffffffff81045ecb>] init_waitqueue_head+0x1f/0x30
 [<ffffffff811ad6a5>] device_register+0x19/0x1e
 [<ffffffff8120f94e>] usb_create_ep_files+0x13a/0x1a0
 [<ffffffff8120f3b1>] usb_create_sysfs_intf_files+0x86/0xa3
 [<ffffffff8120cb1c>] usb_set_configuration+0x3c5/0x40e
 [<ffffffff81208077>] usb_new_device+0x277/0x2da
 [<ffffffff81209263>] hub_thread+0x76c/0xb75
 [<ffffffff8131547a>] _spin_unlock_irq+0x14/0x2e
 [<ffffffff81045c43>] autoremove_wake_function+0x0/0x38
 [<ffffffff8131544a>] _spin_unlock_irqrestore+0x1d/0x39
 [<ffffffff81208af7>] hub_thread+0x0/0xb75
 [<ffffffff81045b1e>] kthread+0xd8/0x10e
 [<ffffffff8102e2a7>] schedule_tail+0x46/0xaf
 [<ffffffff8100aaf8>] child_rip+0xa/0x12
 [<ffffffff81045a46>] kthread+0x0/0x10e
 [<ffffffff8100aaee>] child_rip+0x0/0x12

ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[dcbfd800-dcbfdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
PM: Adding info for ieee1394:354fc0003d716541
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[354fc0003d716541]
PM: Adding info for ieee1394:354fc0003d716541-0
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
lp: driver loaded but no devices found
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-1, type ext3), uses xattr
Adding 4194296k swap on /dev/VolGroup00/SwapVol.  Priority:-1 extents:1 across:4194296k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
floppy0: no floppy controllers found
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2006-10-16 10:59 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-10-06 10:18 Keyboard Stuttering David Gerber
2006-10-06 20:24 ` Frank Sorenson
2006-10-10 17:09 ` Dmitry Torokhov
2006-10-10 18:25   ` john stultz
2006-10-12 16:12     ` Lee Revell
2006-10-13 20:45       ` john stultz
2006-10-16 10:59         ` Andi Kleen
  -- strict thread matches above, loose matches on Subject: below --
2006-10-04 18:15 Frank Sorenson
2006-10-04 20:47 ` Rok Markovic

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).