* Re: [PATCH 05/17] Add OF-tree support to RapidIO controller driver.
2008-03-04 16:29 ` [PATCH 05/17] Add OF-tree support to RapidIO controller driver Zhang Wei
@ 2008-03-04 10:12 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing Zhang Wei
1 sibling, 0 replies; 24+ messages in thread
From: Stephen Rothwell @ 2008-03-04 10:12 UTC (permalink / raw)
To: Zhang Wei; +Cc: mporter, galak, linuxppc-dev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 265 bytes --]
On Wed, 5 Mar 2008 00:29:50 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> +static struct of_device_id fsl_of_rio_rpn_ids[] = {
const, please.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing.
2008-03-04 16:29 ` [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing Zhang Wei
@ 2008-03-04 10:20 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 07/17] Add RapidIO node into MPC8641HPCN dts file Zhang Wei
1 sibling, 0 replies; 24+ messages in thread
From: Stephen Rothwell @ 2008-03-04 10:20 UTC (permalink / raw)
To: Zhang Wei; +Cc: mporter, galak, linuxppc-dev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 526 bytes --]
On Wed, 5 Mar 2008 00:29:51 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> + if (!(rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
> + mport->sys_size ? __ilog2(sizeof(void *)) + 4
> + : 0))) {
Please separate the assignment from the test.
> + if (!(rswitch->route_table = kzalloc(sizeof(u8)*
> + RIO_MAX_ROUTE_ENTRIES(port->sys_size),
> + GFP_KERNEL))) {
Again.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 11/17] Add memory mapping driver to RapidIO.
2008-03-04 16:29 ` [PATCH 11/17] Add memory mapping driver to RapidIO Zhang Wei
@ 2008-03-04 10:37 ` Stephen Rothwell
2008-03-05 1:59 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 12/17] Add RapidIO space allocation bitmap arithmetic Zhang Wei
1 sibling, 1 reply; 24+ messages in thread
From: Stephen Rothwell @ 2008-03-04 10:37 UTC (permalink / raw)
To: Zhang Wei; +Cc: mporter, galak, linuxppc-dev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
On Wed, 5 Mar 2008 00:29:56 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> + if (!(rmem->virt = dma_alloc_coherent(NULL, rmem->size,
> + &rmem->iores.start, GFP_KERNEL))) {
Please separate assignments from tests.
> + if ((ret = rio_space_claim(rmem))) {
Again.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 01/17] Change RIO function mpc85xx_ to fsl_ .
@ 2008-03-04 16:29 Zhang Wei
2008-03-04 16:29 ` [PATCH 02/17] Add RapidIO option to kernel configuration Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The driver is also fit for Freescale MPC8641 processor.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 80 ++++++++++++++++++++--------------------
1 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index af2425e..36c4be4 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,5 +1,5 @@
/*
- * MPC85xx RapidIO support
+ * Freescale MPC85xx/MPC86xx RapidIO support
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
@@ -145,7 +145,7 @@ static struct rio_msg_rx_ring {
} msg_rx_ring;
/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
@@ -153,9 +153,9 @@ static struct rio_msg_rx_ring {
* Sends a MPC85xx doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+static int fsl_rio_doorbell_send(int index, u16 destid, u16 data)
{
- pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
out_be16((void *)(dbell_win), data);
@@ -164,7 +164,7 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
}
/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * fsl_local_config_read - Generate a MPC85xx local config space read
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -173,9 +173,9 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
* Generates a MPC85xx local configuration space read. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+static int fsl_local_config_read(int index, u32 offset, int len, u32 * data)
{
- pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+ pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
offset);
*data = in_be32((void *)(regs_win + offset));
@@ -183,7 +183,7 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
}
/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * fsl_local_config_write - Generate a MPC85xx local config space write
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -192,10 +192,10 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
* Generates a MPC85xx local configuration space write. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+static int fsl_local_config_write(int index, u32 offset, int len, u32 data)
{
pr_debug
- ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
index, offset, data);
out_be32((void *)(regs_win + offset), data);
@@ -203,7 +203,7 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
}
/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -215,13 +215,13 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+fsl_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
u32 * val)
{
u8 *data;
pr_debug
- ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
out_be32((void *)&maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
@@ -243,7 +243,7 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
}
/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -255,12 +255,12 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+fsl_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
int len, u32 val)
{
u8 *data;
pr_debug
- ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
out_be32((void *)&maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
@@ -344,7 +344,7 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -352,7 +352,7 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+fsl_rio_tx_handler(int irq, void *dev_instance)
{
int osr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -452,7 +452,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
/* Hook up outbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_TX, fsl_rio_tx_handler, 0,
"msg_tx", (void *)mport)) < 0)
goto out_irq;
@@ -511,7 +511,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
}
/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -519,7 +519,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+fsl_rio_rx_handler(int irq, void *dev_instance)
{
int isr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -597,7 +597,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
/* Hook up inbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_RX, fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport)) < 0) {
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
msg_tx_ring.virt_buffer[i],
@@ -729,7 +729,7 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -737,7 +737,7 @@ EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
* doorbell event handlers and executes a matching event handler.
*/
static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -794,14 +794,14 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
}
/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
* @mport: Master port implementing the inbound doorbell unit
*
* Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
* or %-ENOMEM on failure.
*/
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+static int fsl_rio_doorbell_init(struct rio_mport *mport)
{
int rc = 0;
@@ -835,7 +835,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
/* Hook up doorbell handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_BELL, fsl_rio_dbell_handler, 0,
"dbell_rx", (void *)mport) < 0)) {
iounmap((void *)dbell_win);
dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
@@ -854,7 +854,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
static char *cmdline = NULL;
-static int mpc85xx_rio_get_hdid(int index)
+static int fsl_rio_get_hdid(int index)
{
/* XXX Need to parse multiple entries in some format */
if (!cmdline)
@@ -863,7 +863,7 @@ static int mpc85xx_rio_get_hdid(int index)
return simple_strtol(cmdline, NULL, 0);
}
-static int mpc85xx_rio_get_cmdline(char *s)
+static int fsl_rio_get_cmdline(char *s)
{
if (!s)
return 0;
@@ -872,10 +872,10 @@ static int mpc85xx_rio_get_cmdline(char *s)
return 1;
}
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
+__setup("riohdid=", fsl_rio_get_cmdline);
/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * fsl_rio_setup - Setup MPC85xx RapidIO interface
* @law_start: Starting physical address of RapidIO LAW
* @law_size: Size of RapidIO LAW
*
@@ -883,17 +883,17 @@ __setup("riohdid=", mpc85xx_rio_get_cmdline);
* master port with system-specific info, and registers the
* master port with the RapidIO subsystem.
*/
-void mpc85xx_rio_setup(int law_start, int law_size)
+void fsl_rio_setup(int law_start, int law_size)
{
struct rio_ops *ops;
struct rio_mport *port;
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
- ops->lcread = mpc85xx_local_config_read;
- ops->lcwrite = mpc85xx_local_config_write;
- ops->cread = mpc85xx_rio_config_read;
- ops->cwrite = mpc85xx_rio_config_write;
- ops->dsend = mpc85xx_rio_doorbell_send;
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
@@ -909,7 +909,7 @@ void mpc85xx_rio_setup(int law_start, int law_size)
strcpy(port->name, "RIO0 mport");
port->ops = ops;
- port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+ port->host_deviceid = fsl_rio_get_hdid(port->id);
rio_register_mport(port);
@@ -928,5 +928,5 @@ void mpc85xx_rio_setup(int law_start, int law_size)
/* Configure outbound doorbell window */
out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
- mpc85xx_rio_doorbell_init(port);
+ fsl_rio_doorbell_init(port);
}
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 02/17] Add RapidIO option to kernel configuration.
2008-03-04 16:29 [PATCH 01/17] Change RIO function mpc85xx_ to fsl_ Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 03/17] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/Kconfig | 13 +++++++++++++
arch/powerpc/platforms/86xx/Kconfig | 1 +
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 485513c..70789e8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -563,6 +563,19 @@ source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
+config HAS_RAPIDIO
+ bool
+ default n
+
+config RAPIDIO
+ bool "RapidIO support"
+ depends on HAS_RAPIDIO
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
endmenu
menu "Advanced setup"
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 21d1135..8c7c5ff 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -8,6 +8,7 @@ config MPC8641_HPCN
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575
+ select HAS_RAPIDIO
help
This option enables support for the MPC8641 HPCN board.
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 03/17] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h
2008-03-04 16:29 ` [PATCH 02/17] Add RapidIO option to kernel configuration Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 04/17] Add RapidIO multi mport support Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
include/asm-powerpc/rio.h | 18 ++++++++++++++++++
include/asm-ppc/rio.h | 18 ------------------
2 files changed, 18 insertions(+), 18 deletions(-)
create mode 100644 include/asm-powerpc/rio.h
delete mode 100644 include/asm-ppc/rio.h
diff --git a/include/asm-powerpc/rio.h b/include/asm-powerpc/rio.h
new file mode 100644
index 0000000..0018bf8
--- /dev/null
+++ b/include/asm-powerpc/rio.h
@@ -0,0 +1,18 @@
+/*
+ * RapidIO architecture support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ASM_PPC_RIO_H
+#define ASM_PPC_RIO_H
+
+extern void platform_rio_init(void);
+
+#endif /* ASM_PPC_RIO_H */
diff --git a/include/asm-ppc/rio.h b/include/asm-ppc/rio.h
deleted file mode 100644
index 0018bf8..0000000
--- a/include/asm-ppc/rio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * RapidIO architecture support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef ASM_PPC_RIO_H
-#define ASM_PPC_RIO_H
-
-extern void platform_rio_init(void);
-
-#endif /* ASM_PPC_RIO_H */
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 04/17] Add RapidIO multi mport support.
2008-03-04 16:29 ` [PATCH 03/17] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 05/17] Add OF-tree support to RapidIO controller driver Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The original RapidIO driver suppose there is only one mpc85xx RIO
controller in system. So, some data structures are defined as
mpc85xx_rio global, such as 'regs_win', 'dbell_ring', 'msg_tx_ring'.
Now, I changed them to mport's private members. And you can define
multi RIO OF-nodes in dts file for multi RapidIO controller
in one processor, such as PCI/PCI-Ex host controllers
in Freescale's silicon. And the mport operation function declaration
should be changed to know which RapidIO controller is target.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 355 +++++++++++++++++++++++------------------
drivers/rapidio/rio-access.c | 10 +-
include/linux/rio.h | 18 ++-
3 files changed, 219 insertions(+), 164 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 36c4be4..7eb6263 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,6 +1,9 @@
/*
* Freescale MPC85xx/MPC86xx RapidIO support
*
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ *
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
@@ -20,6 +23,11 @@
#include <asm/io.h>
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
+#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
+#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+
#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_MSG_REGS_OFFSET 0x11000
@@ -112,20 +120,12 @@ struct rio_tx_desc {
u32 res4;
};
-static u32 regs_win;
-static struct rio_atmu_regs *atmu_regs;
-static struct rio_atmu_regs *maint_atmu_regs;
-static struct rio_atmu_regs *dbell_atmu_regs;
-static u32 dbell_win;
-static u32 maint_win;
-static struct rio_msg_regs *msg_regs;
-
-static struct rio_dbell_ring {
+struct rio_dbell_ring {
void *virt;
dma_addr_t phys;
-} dbell_ring;
+};
-static struct rio_msg_tx_ring {
+struct rio_msg_tx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_TX_RING_SIZE];
@@ -133,16 +133,32 @@ static struct rio_msg_tx_ring {
int tx_slot;
int size;
void *dev_id;
-} msg_tx_ring;
+};
-static struct rio_msg_rx_ring {
+struct rio_msg_rx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_RX_RING_SIZE];
int rx_slot;
int size;
void *dev_id;
-} msg_rx_ring;
+};
+
+struct rio_priv {
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ void __iomem *maint_win;
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
/**
* fsl_rio_doorbell_send - Send a MPC85xx doorbell message
@@ -153,12 +169,14 @@ static struct rio_msg_rx_ring {
* Sends a MPC85xx doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int fsl_rio_doorbell_send(int index, u16 destid, u16 data)
+static int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
{
+ struct rio_priv *priv = mport->priv;
pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
- out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
- out_be16((void *)(dbell_win), data);
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
return 0;
}
@@ -173,11 +191,13 @@ static int fsl_rio_doorbell_send(int index, u16 destid, u16 data)
* Generates a MPC85xx local configuration space read. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int fsl_local_config_read(int index, u32 offset, int len, u32 * data)
+static int fsl_local_config_read(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 * data)
{
+ struct rio_priv *priv = mport->priv;
pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
offset);
- *data = in_be32((void *)(regs_win + offset));
+ *data = in_be32(priv->regs_win + offset);
return 0;
}
@@ -192,12 +212,14 @@ static int fsl_local_config_read(int index, u32 offset, int len, u32 * data)
* Generates a MPC85xx local configuration space write. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int fsl_local_config_write(int index, u32 offset, int len, u32 data)
+static int fsl_local_config_write(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 data)
{
+ struct rio_priv *priv = mport->priv;
pr_debug
("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
index, offset, data);
- out_be32((void *)(regs_win + offset), data);
+ out_be32(priv->regs_win + offset, data);
return 0;
}
@@ -215,18 +237,19 @@ static int fsl_local_config_write(int index, u32 offset, int len, u32 data)
* success or %-EINVAL on failure.
*/
static int
-fsl_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 * val)
+fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 * val)
{
+ struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
- out_be32((void *)&maint_atmu_regs->rowtar,
+ out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) maint_win + offset;
+ data = (u8 *) priv->maint_win + offset;
switch (len) {
case 1:
*val = in_8((u8 *) data);
@@ -255,17 +278,18 @@ fsl_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
* success or %-EINVAL on failure.
*/
static int
-fsl_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
- int len, u32 val)
+fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 val)
{
+ struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
- out_be32((void *)&maint_atmu_regs->rowtar,
+ out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) maint_win + offset;
+ data = (u8 *) priv->maint_win + offset;
switch (len) {
case 1:
out_8((u8 *) data, val);
@@ -296,9 +320,10 @@ int
rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
void *buffer, size_t len)
{
+ struct rio_priv *priv = mport->priv;
u32 omr;
- struct rio_tx_desc *desc =
- (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
+ + priv->msg_tx_ring.tx_slot;
int ret = 0;
pr_debug
@@ -311,11 +336,11 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
}
/* Copy and clear rest of buffer */
- memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+ memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
+ len);
if (len < (RIO_MAX_MSG_SIZE - 4))
- memset((void *)((u32) msg_tx_ring.
- virt_buffer[msg_tx_ring.tx_slot] + len), 0,
- RIO_MAX_MSG_SIZE - len);
+ memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
/* Set mbox field for message */
desc->dport = mbox & 0x3;
@@ -327,15 +352,16 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
/* Set snooping and source buffer address */
- desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+ desc->saddr = 0x00000004
+ | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
/* Increment enqueue pointer */
- omr = in_be32((void *)&msg_regs->omr);
- out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+ omr = in_be32(&priv->msg_regs->omr);
+ out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
/* Go to next descriptor */
- if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
- msg_tx_ring.tx_slot = 0;
+ if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
+ priv->msg_tx_ring.tx_slot = 0;
out:
return ret;
@@ -356,28 +382,30 @@ fsl_rio_tx_handler(int irq, void *dev_instance)
{
int osr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- osr = in_be32((void *)&msg_regs->osr);
+ osr = in_be32(&priv->msg_regs->osr);
if (osr & RIO_MSG_OSR_TE) {
pr_info("RIO: outbound message transmission error\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
goto out;
}
if (osr & RIO_MSG_OSR_QOI) {
pr_info("RIO: outbound message queue overflow\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
goto out;
}
if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32((void *)&msg_regs->odqdpar);
- int slot = (dqp - msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+ u32 dqp = in_be32(&priv->msg_regs->odqdpar);
+ int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
+ slot);
/* Ack the end-of-message interrupt */
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
}
out:
@@ -398,6 +426,7 @@ fsl_rio_tx_handler(int irq, void *dev_instance)
int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_TX_RING_SIZE) ||
(entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -406,53 +435,54 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
}
/* Initialize shadow copy ring */
- msg_tx_ring.dev_id = dev_id;
- msg_tx_ring.size = entries;
+ priv->msg_tx_ring.dev_id = dev_id;
+ priv->msg_tx_ring.size = entries;
- for (i = 0; i < msg_tx_ring.size; i++) {
+ for (i = 0; i < priv->msg_tx_ring.size; i++) {
if (!
- (msg_tx_ring.virt_buffer[i] =
+ (priv->msg_tx_ring.virt_buffer[i] =
dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- &msg_tx_ring.phys_buffer[i],
+ &priv->msg_tx_ring.phys_buffer[i],
GFP_KERNEL))) {
rc = -ENOMEM;
- for (j = 0; j < msg_tx_ring.size; j++)
- if (msg_tx_ring.virt_buffer[j])
+ for (j = 0; j < priv->msg_tx_ring.size; j++)
+ if (priv->msg_tx_ring.virt_buffer[j])
dma_free_coherent(NULL,
RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.
+ priv->msg_tx_ring.
virt_buffer[j],
- msg_tx_ring.
+ priv->msg_tx_ring.
phys_buffer[j]);
goto out;
}
}
/* Initialize outbound message descriptor ring */
- if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
- msg_tx_ring.size *
+ if (!(priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.size *
RIO_MSG_DESC_SIZE,
- &msg_tx_ring.phys,
+ &priv->msg_tx_ring.phys,
GFP_KERNEL))) {
rc = -ENOMEM;
goto out_dma;
}
- memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- msg_tx_ring.tx_slot = 0;
+ memset(priv->msg_tx_ring.virt, 0,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ priv->msg_tx_ring.tx_slot = 0;
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
- out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
/* Configure for snooping */
- out_be32((void *)&msg_regs->osar, 0x00000004);
+ out_be32(&priv->msg_regs->osar, 0x00000004);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->osr, 0x000000b3);
+ out_be32(&priv->msg_regs->osr, 0x000000b3);
/* Hook up outbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, fsl_rio_tx_handler, 0,
+ request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
"msg_tx", (void *)mport)) < 0)
goto out_irq;
@@ -463,28 +493,28 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
* Chaining mode
* Disable
*/
- out_be32((void *)&msg_regs->omr, 0x00100220);
+ out_be32(&priv->msg_regs->omr, 0x00100220);
/* Set number of entries */
- out_be32((void *)&msg_regs->omr,
- in_be32((void *)&msg_regs->omr) |
+ out_be32(&priv->msg_regs->omr,
+ in_be32(&priv->msg_regs->omr) |
((get_bitmask_order(entries) - 2) << 12));
/* Now enable the unit */
- out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+ out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
out:
return rc;
out_irq:
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
- for (i = 0; i < msg_tx_ring.size; i++)
+ for (i = 0; i < priv->msg_tx_ring.size; i++)
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
return rc;
}
@@ -499,15 +529,16 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
*/
void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->omr, 0);
+ out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
}
/**
@@ -523,12 +554,13 @@ fsl_rio_rx_handler(int irq, void *dev_instance)
{
int isr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- isr = in_be32((void *)&msg_regs->isr);
+ isr = in_be32(&priv->msg_regs->isr);
if (isr & RIO_MSG_ISR_TE) {
pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+ out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
goto out;
}
@@ -540,10 +572,10 @@ fsl_rio_rx_handler(int irq, void *dev_instance)
* make the callback with an unknown/invalid mailbox number
* argument.
*/
- port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+ port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
/* Ack the queueing interrupt */
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
}
out:
@@ -564,6 +596,7 @@ fsl_rio_rx_handler(int irq, void *dev_instance)
int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_RX_RING_SIZE) ||
(entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -572,36 +605,36 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
}
/* Initialize client buffer ring */
- msg_rx_ring.dev_id = dev_id;
- msg_rx_ring.size = entries;
- msg_rx_ring.rx_slot = 0;
- for (i = 0; i < msg_rx_ring.size; i++)
- msg_rx_ring.virt_buffer[i] = NULL;
+ priv->msg_rx_ring.dev_id = dev_id;
+ priv->msg_rx_ring.size = entries;
+ priv->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < priv->msg_rx_ring.size; i++)
+ priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
- msg_rx_ring.size *
+ if (!(priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.size *
RIO_MAX_MSG_SIZE,
- &msg_rx_ring.phys,
+ &priv->msg_rx_ring.phys,
GFP_KERNEL))) {
rc = -ENOMEM;
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
- out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->isr, 0x00000091);
+ out_be32(&priv->msg_regs->isr, 0x00000091);
/* Hook up inbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, fsl_rio_rx_handler, 0,
+ request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport)) < 0) {
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
goto out;
}
@@ -612,15 +645,13 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
* Unmask all interrupt sources
* Disable
*/
- out_be32((void *)&msg_regs->imr, 0x001b0060);
+ out_be32(&priv->msg_regs->imr, 0x001b0060);
/* Set number of queue entries */
- out_be32((void *)&msg_regs->imr,
- in_be32((void *)&msg_regs->imr) |
- ((get_bitmask_order(entries) - 2) << 12));
+ setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
/* Now enable the unit */
- out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+ setbits32(&priv->msg_regs->imr, 0x1);
out:
return rc;
@@ -636,15 +667,16 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
*/
void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->imr, 0);
+ out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- msg_rx_ring.virt, msg_rx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
}
/**
@@ -659,21 +691,22 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
{
int rc = 0;
+ struct rio_priv *priv = mport->priv;
pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- msg_rx_ring.rx_slot);
+ priv->msg_rx_ring.rx_slot);
- if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+ if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
printk(KERN_ERR
"RIO: error adding inbound buffer %d, buffer exists\n",
- msg_rx_ring.rx_slot);
+ priv->msg_rx_ring.rx_slot);
rc = -EINVAL;
goto out;
}
- msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
- if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
- msg_rx_ring.rx_slot = 0;
+ priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
+ if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
+ priv->msg_rx_ring.rx_slot = 0;
out:
return rc;
@@ -691,20 +724,20 @@ EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
*/
void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
{
- u32 imr;
+ struct rio_priv *priv = mport->priv;
u32 phys_buf, virt_buf;
void *buf = NULL;
int buf_idx;
- phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+ phys_buf = in_be32(&priv->msg_regs->ifqdpar);
/* If no more messages, then bail out */
- if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+ if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
goto out2;
- virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
- buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = msg_rx_ring.virt_buffer[buf_idx];
+ virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf - priv->msg_rx_ring.phys);
+ buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = priv->msg_rx_ring.virt_buffer[buf_idx];
if (!buf) {
printk(KERN_ERR
@@ -716,11 +749,10 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
/* Clear the available buffer */
- msg_rx_ring.virt_buffer[buf_idx] = NULL;
+ priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
out1:
- imr = in_be32((void *)&msg_regs->imr);
- out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+ setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
out2:
return buf;
@@ -741,27 +773,27 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- dsr = in_be32((void *)&msg_regs->dsr);
+ dsr = in_be32(&priv->msg_regs->dsr);
if (dsr & DOORBELL_DSR_TE) {
pr_info("RIO: doorbell reception error\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
goto out;
}
if (dsr & DOORBELL_DSR_QFI) {
pr_info("RIO: doorbell queue full\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
goto out;
}
/* XXX Need to check/dispatch until queue empty */
if (dsr & DOORBELL_DSR_DIQI) {
u32 dmsg =
- (u32) dbell_ring.virt +
- (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
- u32 dmr;
+ (u32) priv->dbell_ring.virt +
+ (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
struct rio_dbell *dbell;
int found = 0;
@@ -784,9 +816,8 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
}
- dmr = in_be32((void *)&msg_regs->dmr);
- out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+ setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
}
out:
@@ -803,10 +834,11 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
*/
static int fsl_rio_doorbell_init(struct rio_mport *mport)
{
+ struct rio_priv *priv = mport->priv;
int rc = 0;
/* Map outbound doorbell window immediately after maintenance window */
- if (!(dbell_win =
+ if (!(priv->dbell_win =
(u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
RIO_DBELL_WIN_SIZE))) {
printk(KERN_ERR
@@ -816,37 +848,37 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
}
/* Initialize inbound doorbells */
- if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+ if (!(priv->dbell_ring.virt = dma_alloc_coherent(NULL,
512 * DOORBELL_MESSAGE_SIZE,
- &dbell_ring.phys,
+ &priv->dbell_ring.phys,
GFP_KERNEL))) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
rc = -ENOMEM;
- iounmap((void *)dbell_win);
+ iounmap(priv->dbell_win);
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
- out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->dsr, 0x00000091);
+ out_be32(&priv->msg_regs->dsr, 0x00000091);
/* Hook up doorbell handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, fsl_rio_dbell_handler, 0,
+ request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
"dbell_rx", (void *)mport) < 0)) {
- iounmap((void *)dbell_win);
+ iounmap(priv->dbell_win);
dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
- dbell_ring.virt, dbell_ring.phys);
+ priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
goto out;
}
/* Configure doorbells for snooping, 512 entries, and enable */
- out_be32((void *)&msg_regs->dmr, 0x00108161);
+ out_be32(&priv->msg_regs->dmr, 0x00108161);
out:
return rc;
@@ -887,6 +919,8 @@ void fsl_rio_setup(int law_start, int law_size)
{
struct rio_ops *ops;
struct rio_mport *port;
+ struct rio_priv *priv = NULL;
+ int rc;
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
ops->lcread = fsl_local_config_read;
@@ -895,9 +929,17 @@ void fsl_rio_setup(int law_start, int law_size)
ops->cwrite = fsl_rio_config_write;
ops->dsend = fsl_rio_doorbell_send;
- port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
port->index = 0;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+
INIT_LIST_HEAD(&port->dbells);
port->iores.start = law_start;
port->iores.end = law_start + law_size;
@@ -911,22 +953,31 @@ void fsl_rio_setup(int law_start, int law_size)
port->ops = ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
+ port->priv = priv;
rio_register_mport(port);
- regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
- atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
- maint_atmu_regs = atmu_regs + 1;
- dbell_atmu_regs = atmu_regs + 2;
- msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+ priv->regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + RIO_ATMU_REGS_OFFSET);
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+ priv->dbell_atmu_regs = priv->atmu_regs + 2;
+ priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win + RIO_MSG_REGS_OFFSET);
/* Configure maintenance transaction window */
- out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
- out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+ out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
- maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+ priv->maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
/* Configure outbound doorbell window */
- out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+ out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
fsl_rio_doorbell_init(port);
+
+ return;
+err:
+ if (priv)
+ iounmap(priv->regs_win);
+ kfree(priv);
+ kfree(port);
}
diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c
index 8b56bbd..a3824ba 100644
--- a/drivers/rapidio/rio-access.c
+++ b/drivers/rapidio/rio-access.c
@@ -48,7 +48,7 @@ int __rio_local_read_config_##size \
u32 data = 0; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->lcread(mport->id, offset, len, &data); \
+ res = mport->ops->lcread(mport, mport->id, offset, len, &data); \
*value = (type)data; \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
@@ -71,7 +71,7 @@ int __rio_local_write_config_##size \
unsigned long flags; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->lcwrite(mport->id, offset, len, value); \
+ res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
}
@@ -108,7 +108,7 @@ int rio_mport_read_config_##size \
u32 data = 0; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \
+ res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
*value = (type)data; \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
@@ -131,7 +131,7 @@ int rio_mport_write_config_##size \
unsigned long flags; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \
+ res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
}
@@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
unsigned long flags;
spin_lock_irqsave(&rio_doorbell_lock, flags);
- res = mport->ops->dsend(mport->id, destid, data);
+ res = mport->ops->dsend(mport, mport->id, destid, data);
spin_unlock_irqrestore(&rio_doorbell_lock, flags);
return res;
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 68e3f68..9ed78dc 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -163,6 +163,7 @@ struct rio_dbell {
* @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type
* @name: Port name string
+ * @priv: Master port private data
*/
struct rio_mport {
struct list_head dbells; /* list of doorbell events */
@@ -178,6 +179,7 @@ struct rio_mport {
unsigned char index; /* port index, unique among all port
interfaces of the same type */
unsigned char name[40];
+ void *priv; /* Master port private data */
};
/**
@@ -229,13 +231,15 @@ struct rio_switch {
* @dsend: Callback to send a doorbell message.
*/
struct rio_ops {
- int (*lcread) (int index, u32 offset, int len, u32 * data);
- int (*lcwrite) (int index, u32 offset, int len, u32 data);
- int (*cread) (int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 * data);
- int (*cwrite) (int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 data);
- int (*dsend) (int index, u16 destid, u16 data);
+ int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
+ u32 * data);
+ int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len,
+ u32 data);
+ int (*cread) (struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 * data);
+ int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data);
+ int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
};
#define RIO_RESOURCE_MEM 0x00000100
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 05/17] Add OF-tree support to RapidIO controller driver.
2008-03-04 16:29 ` [PATCH 04/17] Add RapidIO multi mport support Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 10:12 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing Zhang Wei
0 siblings, 2 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/kernel/Makefile | 1 -
arch/powerpc/kernel/rio.c | 52 -------------------
arch/powerpc/sysdev/fsl_rio.c | 110 ++++++++++++++++++++++++++++++++++++++---
arch/powerpc/sysdev/fsl_rio.h | 20 -------
4 files changed, 102 insertions(+), 81 deletions(-)
delete mode 100644 arch/powerpc/kernel/rio.c
delete mode 100644 arch/powerpc/sysdev/fsl_rio.h
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0662ae4..52d5f35 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -72,7 +72,6 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o
obj-$(CONFIG_PCI_MSI) += msi.o
-obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c
deleted file mode 100644
index 29487fe..0000000
--- a/arch/powerpc/kernel/rio.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * RapidIO PPC32 support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/rio.h>
-
-#include <asm/rio.h>
-
-/**
- * platform_rio_init - Do platform specific RIO init
- *
- * Any platform specific initialization of RapdIO
- * hardware is done here as well as registration
- * of any active master ports in the system.
- */
-void __attribute__ ((weak))
- platform_rio_init(void)
-{
- printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
-}
-
-/**
- * ppc_rio_init - Do PPC32 RIO init
- *
- * Calls platform-specific RIO init code and then calls
- * rio_init_mports() to initialize any master ports that
- * have been registered with the RIO subsystem.
- */
-static int __init ppc_rio_init(void)
-{
- printk(KERN_INFO "RIO: RapidIO init\n");
-
- /* Platform specific initialization */
- platform_rio_init();
-
- /* Enumerate all registered ports */
- rio_init_mports();
-
- return 0;
-}
-
-subsys_initcall(ppc_rio_init);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 7eb6263..5c9af4f 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
+#include <linux/of_platform.h>
#include <asm/io.h>
@@ -28,7 +29,6 @@
#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
-#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_MSG_REGS_OFFSET 0x11000
#define RIO_MAINT_WIN_SIZE 0x400000
@@ -908,19 +908,66 @@ __setup("riohdid=", fsl_rio_get_cmdline);
/**
* fsl_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
+ * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
*
* Initializes MPC85xx RapidIO hardware interface, configures
* master port with system-specific info, and registers the
* master port with the RapidIO subsystem.
*/
-void fsl_rio_setup(int law_start, int law_size)
+int fsl_rio_setup(struct of_device *dev)
{
struct rio_ops *ops;
struct rio_mport *port;
- struct rio_priv *priv = NULL;
- int rc;
+ struct rio_priv *priv;
+ int rc = 0;
+ const u32 *dt_range, *cell;
+ struct resource regs;
+ int rlen;
+ u64 law_start, law_size;
+ int paw, aw, sw;
+
+ if (!dev->node) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -EFAULT;
+ }
+
+ rc = of_address_to_resource(dev->node, 0, ®s);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ dev->node->full_name);
+ return -EFAULT;
+ }
+ dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
+ dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start,
+ regs.end - regs.start + 1);
+
+ dt_range = of_get_property(dev->node, "ranges", &rlen);
+ if (!dt_range) {
+ dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+ dev->node->full_name);
+ return -EFAULT;
+ }
+
+ /* Get node address wide */
+ cell = of_get_property(dev->node, "#address-cells", NULL);
+ if (cell)
+ aw = *cell;
+ else
+ aw = of_n_addr_cells(dev->node);
+ /* Get node size wide */
+ cell = of_get_property(dev->node, "#size-cells", NULL);
+ if (cell)
+ sw = *cell;
+ else
+ sw = of_n_size_cells(dev->node);
+ /* Get parent address wide wide */
+ paw = of_n_addr_cells(dev->node);
+
+ law_start = of_read_number(dt_range + aw, paw);
+ law_size = of_read_number(dt_range + aw + paw, sw);
+
+ dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
+ law_start, law_size);
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
ops->lcread = fsl_local_config_read;
@@ -945,6 +992,12 @@ void fsl_rio_setup(int law_start, int law_size)
port->iores.end = law_start + law_size;
port->iores.flags = IORESOURCE_MEM;
+ priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+ priv->txirq = irq_of_parse_and_map(dev->node, 3);
+ priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+ dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+ priv->txirq, priv->rxirq);
+
rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
@@ -956,7 +1009,7 @@ void fsl_rio_setup(int law_start, int law_size)
port->priv = priv;
rio_register_mport(port);
- priv->regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+ priv->regs_win = (u32) ioremap(regs.start, regs.end - regs.start + 1);
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
@@ -974,10 +1027,51 @@ void fsl_rio_setup(int law_start, int law_size)
out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
fsl_rio_doorbell_init(port);
- return;
+ return 0;
err:
if (priv)
iounmap(priv->regs_win);
+ kfree(ops);
kfree(priv);
kfree(port);
+ return rc;
}
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ int rc;
+ printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+ dev->node->full_name);
+
+ rc = fsl_rio_setup(dev);
+ if (rc)
+ goto out;
+
+ /* Enumerate all registered ports */
+ rc = rio_init_mports();
+out:
+ return rc;
+};
+
+static struct of_device_id fsl_of_rio_rpn_ids[] = {
+ {
+ .compatible = "fsl,rapidio-delta",
+ },
+ {},
+};
+
+static struct of_platform_driver fsl_of_rio_rpn_driver = {
+ .name = "fsl-of-rio",
+ .match_table = fsl_of_rio_rpn_ids,
+ .probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+ return of_register_platform_driver(&fsl_of_rio_rpn_driver);
+}
+
+subsys_initcall(fsl_of_rio_rpn_init);
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
deleted file mode 100644
index 6d3ff30..0000000
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * MPC85xx RapidIO definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
-#define __PPC_SYSLIB_PPC85XX_RIO_H
-
-#include <linux/init.h>
-
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-
-#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing.
2008-03-04 16:29 ` [PATCH 05/17] Add OF-tree support to RapidIO controller driver Zhang Wei
2008-03-04 10:12 ` Stephen Rothwell
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 10:20 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 07/17] Add RapidIO node into MPC8641HPCN dts file Zhang Wei
1 sibling, 2 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The RapidIO system size will auto probe in RIO setup. The route
table and rionet_active in rionet.c are changed to be allocated
dynamically according the system size.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 6 +++++
drivers/net/rionet.c | 16 +++++++++++-
drivers/rapidio/Kconfig | 8 ------
drivers/rapidio/rio-scan.c | 51 +++++++++++++++++++++++++++++------------
drivers/rapidio/rio-sysfs.c | 3 +-
drivers/rapidio/rio.c | 2 +-
drivers/rapidio/rio.h | 9 +-----
include/linux/rio.h | 14 +++++-----
8 files changed, 68 insertions(+), 41 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 5c9af4f..9dae418 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1010,6 +1010,12 @@ int fsl_rio_setup(struct of_device *dev)
rio_register_mport(port);
priv->regs_win = (u32) ioremap(regs.start, regs.end - regs.start + 1);
+
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index e7fd08a..6aa9731 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -77,7 +77,7 @@ static int rionet_capable = 1;
* could be made into a hash table to save memory depending
* on system trade-offs.
*/
-static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+static struct rio_dev **rionet_active;
#define is_rionet_capable(pef, src_ops, dst_ops) \
((pef & RIO_PEF_INB_MBOX) && \
@@ -195,7 +195,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
}
if (eth->h_dest[0] & 0x01) {
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
+ i++)
if (rionet_active[i])
rionet_queue_tx_msg(skb, ndev,
rionet_active[i]);
@@ -385,6 +386,8 @@ static void rionet_remove(struct rio_dev *rdev)
struct net_device *ndev = NULL;
struct rionet_peer *peer, *tmp;
+ free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
+ __ilog2(sizeof(void *)) + 4 : 0);
unregister_netdev(ndev);
kfree(ndev);
@@ -443,6 +446,15 @@ static int rionet_setup_netdev(struct rio_mport *mport)
goto out;
}
+ if (!(rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
+ mport->sys_size ? __ilog2(sizeof(void *)) + 4
+ : 0))) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memset((void *)rionet_active, 0, sizeof(void *) *
+ RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
+
/* Set up private area */
rnet = (struct rionet_private *)ndev->priv;
rnet->mport = mport;
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 4142115..c32822a 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,14 +1,6 @@
#
# RapidIO configuration
#
-config RAPIDIO_8_BIT_TRANSPORT
- bool "8-bit transport addressing"
- depends on RAPIDIO
- ---help---
- By default, the kernel assumes a 16-bit addressed RapidIO
- network. By selecting this option, the kernel will support
- an 8-bit addressed network.
-
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4442072..ca895d1 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
- return RIO_GET_DID(result);
+ return RIO_GET_DID(port->sys_size, result);
}
/**
@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
- RIO_SET_DID(did));
+ RIO_SET_DID(port->sys_size, did));
}
/**
@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u
*/
static void rio_local_set_device_id(struct rio_mport *port, u16 did)
{
- rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+ rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+ did));
}
/**
@@ -350,8 +351,17 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ if (!(rswitch->route_table = kzalloc(sizeof(u8)*
+ RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+ GFP_KERNEL))) {
+ kfree(rdev);
+ rdev = NULL;
+ kfree(rswitch);
+ goto out;
+ }
/* Initialize switch route table */
- for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+ for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+ rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
rdev->rswitch = rswitch;
sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
@@ -480,7 +490,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
{
u32 result;
- rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
RIO_HOST_DID_LOCK_CSR, &result);
return (u16) (result & 0xffff);
@@ -571,14 +581,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Attempt to acquire device lock */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
< port->host_deviceid) {
/* Delay a bit */
mdelay(1);
/* Attempt to acquire device lock again */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
}
@@ -590,7 +602,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Setup new RIO device */
- if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+ if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+ hopcount, 1))) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
} else
@@ -598,7 +611,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
if (rio_is_switch(rdev)) {
next_switchid++;
- sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
+ sw_inport = rio_get_swpinfo_inport(port,
+ RIO_ANY_DESTID(port->sys_size), hopcount);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -612,7 +626,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
num_ports =
- rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+ rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
@@ -624,13 +639,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
cur_destid = next_destid;
if (rio_sport_is_active
- (port, RIO_ANY_DESTID, hopcount, port_num)) {
+ (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+ port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
- RIO_ANY_DESTID, port_num);
+ RIO_ANY_DESTID(port->sys_size),
+ port_num);
if (rio_enum_peer(net, port, hopcount + 1) < 0)
return -1;
@@ -735,7 +752,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
- for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+ for (ndestid = 0;
+ ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
@@ -917,7 +935,9 @@ static void rio_build_route_tables(void)
list_for_each_entry(rdev, &rio_devices, global_list)
if (rio_is_switch(rdev))
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0;
+ i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rio_route_get_entry
(rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
i, &sport) < 0)
@@ -981,7 +1001,8 @@ int rio_disc_mport(struct rio_mport *mport)
del_timer_sync(&rio_enum_timer);
pr_debug("done\n");
- if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+ if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+ 0) < 0) {
printk(KERN_INFO
"RIO: master port %d device has failed discovery\n",
mport->id);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 659e311..97a147f 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
if (!rdev->rswitch)
goto out;
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
continue;
str +=
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 80c5f1b..680661a 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -43,7 +43,7 @@ u16 rio_local_get_device_id(struct rio_mport *port)
rio_local_read_config_32(port, RIO_DID_CSR, &result);
- return (RIO_GET_DID(result));
+ return (RIO_GET_DID(port->sys_size, result));
}
/**
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 80e3f03..7786d02 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
vid, did, add_hook, get_hook)
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x) ((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x) (x & 0xffff)
-#define RIO_SET_DID(x) (x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 9ed78dc..4b0156d 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/rio_regs.h>
-#define RIO_ANY_DESTID 0xff
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
@@ -39,11 +38,8 @@
entry is invalid (no route
exists for the device ID) */
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_MAX_ROUTE_ENTRIES (1 << 8)
-#else
-#define RIO_MAX_ROUTE_ENTRIES (1 << 16)
-#endif
+#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff)
#define RIO_MAX_MBOX 4
#define RIO_MAX_MSG_SIZE 0x1000
@@ -178,6 +174,10 @@ struct rio_mport {
unsigned char id; /* port ID, unique among all ports */
unsigned char index; /* port index, unique among all port
interfaces of the same type */
+ unsigned int sys_size; /* RapidIO common transport system size.
+ * 0 - Small size. 256 devices.
+ * 1 - Large size, 65536 devices.
+ */
unsigned char name[40];
void *priv; /* Master port private data */
};
@@ -213,7 +213,7 @@ struct rio_switch {
u16 switchid;
u16 hopcount;
u16 destid;
- u8 route_table[RIO_MAX_ROUTE_ENTRIES];
+ u8 *route_table;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 07/17] Add RapidIO node into MPC8641HPCN dts file
2008-03-04 16:29 ` [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing Zhang Wei
2008-03-04 10:20 ` Stephen Rothwell
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 08/17] Add RapidIO node probing into MPC86xx_HPCN board id table Zhang Wei
1 sibling, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 79385bc..4b296af 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,6 +26,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ rapidio0 = &rapidio0;
};
cpus {
@@ -500,4 +501,15 @@
0x0 0x00100000>;
};
};
+ rapidio0: rapidio@f80c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <0xf80c0000 0x20000>;
+ ranges = <0 0 0xc0000000 0 0x20000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ };
};
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 08/17] Add RapidIO node probing into MPC86xx_HPCN board id table.
2008-03-04 16:29 ` [PATCH 07/17] Add RapidIO node into MPC8641HPCN dts file Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 09/17] Add serial RapidIO controller support, which includes MPC8548, MPC8641 Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c5..4a3e421 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -215,6 +215,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 09/17] Add serial RapidIO controller support, which includes MPC8548, MPC8641.
2008-03-04 16:29 ` [PATCH 08/17] Add RapidIO node probing into MPC86xx_HPCN board id table Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 10/17] Add RapidIO connection info print out and re-training for break connection Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 74 +++++++++++++++++++++++++++++++++++-----
include/linux/rio.h | 6 +++
2 files changed, 70 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 9dae418..1535d12 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -21,6 +21,7 @@
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
+#include <linux/delay.h>
#include <asm/io.h>
@@ -30,7 +31,12 @@
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_MSG_REGS_OFFSET 0x11000
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+#define RIO_ESCSR 0x158
+#define RIO_CCSR 0x15c
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
@@ -69,7 +75,7 @@
struct rio_atmu_regs {
u32 rowtar;
- u32 pad1;
+ u32 rowtear;
u32 rowbar;
u32 pad2;
u32 rowar;
@@ -95,7 +101,15 @@ struct rio_msg_regs {
u32 ifqdpar;
u32 pad6;
u32 ifqepar;
- u32 pad7[250];
+ u32 pad7[226];
+ u32 odmr;
+ u32 odsr;
+ u32 res0[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 res1[3];
+ u32 odretcr;
+ u32 res2[12];
u32 dmr;
u32 dsr;
u32 pad8;
@@ -175,8 +189,22 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
struct rio_priv *priv = mport->priv;
pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
+ break;
+ case RIO_PHY_SERIAL:
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&priv->msg_regs->odmr, 0x00000000);
+ out_be32(&priv->msg_regs->odretcr, 0x00000004);
+ out_be32(&priv->msg_regs->oddpr, destid << 16);
+ out_be32(&priv->msg_regs->oddatr,data );
+ out_be32(&priv->msg_regs->odmr, 0x00000001);
+ break;
+ }
return 0;
}
@@ -342,11 +370,22 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ len, 0, RIO_MAX_MSG_SIZE - len);
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
+ switch(mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | ( mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+ break;
+ }
/* Set transfer size aligned to next power of 2 (in double words) */
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
@@ -923,6 +962,7 @@ int fsl_rio_setup(struct of_device *dev)
const u32 *dt_range, *cell;
struct resource regs;
int rlen;
+ u32 ccsr;
u64 law_start, law_size;
int paw, aw, sw;
@@ -1011,6 +1051,14 @@ int fsl_rio_setup(struct of_device *dev)
priv->regs_win = (u32) ioremap(regs.start, regs.end - regs.start + 1);
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ dev_info(&dev->dev, "RapidIO PHY type: %s\n",
+ (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
+ ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
+ "unknown"));
+
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
@@ -1020,7 +1068,13 @@ int fsl_rio_setup(struct of_device *dev)
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win + RIO_MSG_REGS_OFFSET);
+ priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
+ ((port->phy_type == RIO_PHY_SERIAL) ?
+ RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4b0156d..b96cdf4 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -145,6 +145,11 @@ struct rio_dbell {
void *dev_id;
};
+enum rio_phy_type {
+ RIO_PHY_PARALLEL,
+ RIO_PHY_SERIAL,
+};
+
/**
* struct rio_mport - RIO master port info
* @dbells: List of doorbell events
@@ -178,6 +183,7 @@ struct rio_mport {
* 0 - Small size. 256 devices.
* 1 - Large size, 65536 devices.
*/
+ enum rio_phy_type phy_type; /* RapidIO phy type */
unsigned char name[40];
void *priv; /* Master port private data */
};
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 10/17] Add RapidIO connection info print out and re-training for break connection.
2008-03-04 16:29 ` [PATCH 09/17] Add serial RapidIO controller support, which includes MPC8548, MPC8641 Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 11/17] Add memory mapping driver to RapidIO Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 71 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 71 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 1535d12..585f7d2 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -945,6 +945,48 @@ static int fsl_rio_get_cmdline(char *s)
__setup("riohdid=", fsl_rio_get_cmdline);
+static inline void fsl_rio_info(struct device *dev, u32 ccsr)
+{
+ const char *str;
+ if (ccsr & 1) {
+ /* Serial phy */
+ switch (ccsr >> 30) {
+ case 0:
+ str = "1";
+ break;
+ case 1:
+ str = "4";
+ break;
+ default:
+ str = "Unknown";
+ break;;
+ }
+ dev_info(dev, "Hardware port width: %s\n", str);
+
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ str = "Single-lane 0";
+ break;
+ case 1:
+ str = "Single-lane 2";
+ break;
+ case 2:
+ str = "Four-lane";
+ break;
+ default:
+ str = "Unknown";
+ break;
+ }
+ dev_info(dev, "Training connection status: %s\n", str);
+ } else {
+ /* Parallel phy */
+ if (!(ccsr & 0x80000000))
+ dev_info(dev, "Output port operating in 8-bit mode\n");
+ if (!(ccsr & 0x08000000))
+ dev_info(dev, "Input port operating in 8-bit mode\n");
+ }
+}
+
/**
* fsl_rio_setup - Setup MPC85xx RapidIO interface
* @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
@@ -1058,6 +1100,35 @@ int fsl_rio_setup(struct of_device *dev)
(port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
"unknown"));
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port is not ready. "
+ "Try to restart connection...\n");
+ switch (port->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
+ /* Enable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
+ break;
+ }
+ msleep(100);
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port restart failed.\n");
+ rc = -ENOLINK;
+ goto err;
+ }
+ dev_info(&dev->dev, "Port restart success!\n");
+ }
+ fsl_rio_info(&dev->dev, ccsr);
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 11/17] Add memory mapping driver to RapidIO.
2008-03-04 16:29 ` [PATCH 10/17] Add RapidIO connection info print out and re-training for break connection Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 10:37 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 12/17] Add RapidIO space allocation bitmap arithmetic Zhang Wei
0 siblings, 2 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The memory mapping driver is used for mapping IO address
and system memory address space to RapidIO address space.
The driver support IO space allocation, RapidIO space
inbound window and outbound window creation.
The system can access other RapidIO device by outbound
window and can be accessed by other RapidIO device
through inbound window.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 4 +-
drivers/rapidio/rio.c | 357 +++++++++++++++++++++++++++++++++++++++++
include/linux/rio.h | 39 +++++
include/linux/rio_drv.h | 41 ++++-
4 files changed, 435 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 585f7d2..068d822 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1061,6 +1061,7 @@ int fsl_rio_setup(struct of_device *dev)
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
port->index = 0;
+ port->dev = &dev->dev;
priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
if (!priv) {
@@ -1071,8 +1072,9 @@ int fsl_rio_setup(struct of_device *dev)
INIT_LIST_HEAD(&port->dbells);
port->iores.start = law_start;
- port->iores.end = law_start + law_size;
+ port->iores.end = law_start + law_size - 1;
port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
priv->bellirq = irq_of_parse_and_map(dev->node, 2);
priv->txirq = irq_of_parse_and_map(dev->node, 3);
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 680661a..0dc365d 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -2,9 +2,16 @@
* RapidIO interconnect services
* (RapidIO Interconnect Specification, http://www.rapidio.org)
*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Zhang Wei, wei.zhang@freescale.com, Jun 2007
+ *
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Changelog:
+ * Jun 2007 Zhang Wei <wei.zhang@freescale.com>
+ * - Add memory mapping support.
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -24,10 +31,16 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
#include "rio.h"
static LIST_HEAD(rio_mports);
+static LIST_HEAD(rio_inb_mems);
+static LIST_HEAD(rio_outb_mems);
+
+static DEFINE_SPINLOCK(rio_config_lock);
/**
* rio_local_get_device_id - Get the base/extended device id for a port
@@ -333,6 +346,350 @@ int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
}
/**
+ * rio_request_io_region - request resource in RapidIO IO region
+ * @mport: Master port
+ * @res: Resource need be requested.
+ *
+ * Return: 0 - Successed.
+ */
+int rio_request_io_region(struct rio_mport *mport, struct resource *res)
+{
+ if (!res)
+ return -EINVAL;
+
+ return request_resource(&mport->iores, res);
+}
+EXPORT_SYMBOL_GPL(rio_request_io_region);
+
+/**
+ * rio_alloc_io - Allocat IO resource for RapidIO master port.
+ * @mport: Master port
+ * @size: IO resource size
+ * @name: Resource name
+ * @flag: Flag for resource
+ * @res: Return resource which has been allocated.
+ */
+int rio_alloc_io(struct rio_mport *mport, resource_size_t size,
+ const char *name, unsigned long flags, struct resource *res)
+{
+ if (!res)
+ return -EINVAL;
+
+ size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ if (allocate_resource(&mport->iores, res, size, mport->iores.start,
+ mport->iores.end, size, NULL, NULL) < 0) {
+ dev_err(mport->dev, "allocte IO error, no enough space!\n");
+ return -ENOSPC;
+ }
+ res->name = name;
+ res->flags = flags;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_alloc_io);
+
+/**
+ * rio_map_inb_region -- Mapping inbound memory region.
+ * @mport: Master port.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->riores to mem->iores.
+ */
+int rio_map_inb_region(struct rio_mport *mport, struct rio_mem *mem, u32 rflags)
+{
+ int rc = 0;
+ unsigned long flags;
+
+ if (!mport->mops)
+ return -1;
+ spin_lock_irqsave(&rio_config_lock, flags);
+ rc = mport->mops->map_inb(mport, mem->iores.start, mem->riores.start, mem->size, rflags);
+ spin_unlock_irqrestore(&rio_config_lock, flags);
+ return rc;
+}
+
+/**
+ * rio_map_outb_region -- Mapping outbound memory region.
+ * @mport: Master port.
+ * @tid: Target RapidIO device id.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->iores to mem->riores.
+ */
+int rio_map_outb_region(struct rio_mport *mport, u16 tid,
+ struct rio_mem *mem, u32 rflags)
+{
+ int rc = 0;
+ unsigned long flags;
+
+ if (!mport->mops)
+ return -1;
+ spin_lock_irqsave(&rio_config_lock, flags);
+ rc = mport->mops->map_outb(mport, mem->iores.start, mem->riores.start, mem->size, tid, rflags);
+ spin_unlock_irqrestore(&rio_config_lock, flags);
+ return rc;
+}
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+ unsigned long flags;
+ if (!mport->mops)
+ return;
+ spin_lock_irqsave(&rio_config_lock, flags);
+ mport->mops->unmap_inb(mport, mem->iores.start);
+ spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_unmap_outb_region -- Unmap the outbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+ unsigned long flags;
+ if (!mport->mops)
+ return;
+ spin_lock_irqsave(&rio_config_lock, flags);
+ mport->mops->unmap_outb(mport, mem->iores.start);
+ spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_release_inb_region -- Release the inbound region resource.
+ * @mport: Master port
+ * @mem: Inbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+ int rc = 0;
+ if (!mem)
+ return rc;
+ rio_unmap_inb_region(mport, mem);
+ if (mem->virt)
+ dma_free_coherent(NULL, mem->size, mem->virt, mem->iores.start);
+
+ if (mem->iores.parent)
+ rc = release_resource(&mem->iores);
+ if (mem->riores.parent && !rc)
+ rc = release_resource(&mem->riores);
+
+ if (mem->node.prev)
+ list_del(&mem->node);
+
+ kfree(mem);
+
+ return rc;
+}
+
+/**
+ * rio_request_inb_region -- Request inbound memory region
+ * @mport: Master port
+ * @dev_id: Device specific pointer to pass
+ * @size: The request memory windows size
+ * @name: The region name
+ * @owner: The region owner driver id
+ *
+ * Retrun: The rio_mem struction for inbound memory descriptor.
+ *
+ * This function is used for request RapidIO space inbound region. If the size
+ * less than 4096 or not aligned to 2^N, it will be adjusted. The function will
+ * alloc a block of local DMA memory of the size for inbound region target and
+ * request a RapidIO region for inbound region source. Then the inbound region
+ * will be claimed in RapidIO space and the local DMA memory will be added to
+ * local inbound memory list. The rio_mem with the inbound relationship will
+ * be returned.
+ */
+struct rio_mem *rio_request_inb_region(struct rio_mport *mport, void *dev_id,
+ resource_size_t size, const char *name, u32 owner)
+{
+ struct rio_mem *rmem = NULL;
+ struct rio_dev *dev = dev_id;
+ int ret;
+
+ rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+ if (!rmem)
+ goto err;
+
+ /* Align the size to 2^N */
+ size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Alloc the RapidIO space */
+ ret = rio_space_request(mport, size, &rmem->riores);
+ if (ret) {
+ dev_err(mport->dev, "RIO space request error! ret = %d\n", ret);
+ goto err;
+ }
+
+ rmem->dev = dev;
+ rmem->riores.name = name;
+ rmem->size = rmem->riores.end - rmem->riores.start + 1;
+
+ /* Initialize inbound memory */
+ if (!(rmem->virt = dma_alloc_coherent(NULL, rmem->size,
+ &rmem->iores.start, GFP_KERNEL))) {
+ dev_err(mport->dev, "Inbound memory alloc error\n");
+ goto err;
+ }
+ rmem->iores.end = rmem->iores.start + rmem->size - 1;
+ rmem->owner = owner;
+
+ /* Map RIO space to local DMA memory */
+ if ((ret = rio_map_inb_region(mport, rmem, 0))) {
+ dev_err(mport->dev, "RIO map inbound mem error, ret = %d\n",
+ ret);
+ goto err;
+ }
+
+ /* Claim the region */
+ if ((ret = rio_space_claim(rmem))) {
+ dev_err(mport->dev, "RIO inbound mem claim error, ret = %d\n",
+ ret);
+ goto err;
+ }
+ list_add(&rmem->node, &rio_inb_mems);
+
+ return rmem;
+
+err:
+ rio_release_inb_region(mport, rmem);
+ return NULL;
+}
+
+/**
+ * rio_release_outb_region -- Release the outbound region resource.
+ * @mport: Master port
+ * @mem: Outbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+ int rc = 0;
+ if (!mem)
+ return rc;
+ rio_unmap_outb_region(mport, mem);
+ rio_space_release(mem);
+ if (mem->virt)
+ iounmap(mem->virt);
+
+ if (mem->iores.parent)
+ rc = release_resource(&mem->iores);
+ if (mem->riores.parent && !rc)
+ rc = release_resource(&mem->riores);
+
+ if (mem->node.prev)
+ list_del(&mem->node);
+
+ kfree(mem);
+
+ return rc;
+}
+
+/** rio_prepare_io_mem -- Prepare IO region for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. The function do not map the outbound region
+ * because ioremap can not located at the interrupt action function.
+ * The function can be called in the initialization for just prepared.
+ */
+struct rio_mem *rio_prepare_io_mem(struct rio_mport *mport,
+ struct rio_dev *dev, resource_size_t size, const char *name)
+{
+ struct rio_mem *rmem = NULL;
+ int rc;
+
+ rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+ if (!rmem)
+ goto err;
+
+ /* Align the size to 2^N */
+ size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Request RapidIO IO region */
+ rc = rio_alloc_io(mport, size, name, RIO_RESOURCE_MEM, &rmem->iores);
+ if (rc) {
+ dev_err(mport->dev,
+ "RIO io region request error with rc = %d!\n", rc);
+ goto err;
+ }
+
+ rmem->virt = ioremap((phys_addr_t)(rmem->iores.start), size);
+ rmem->size = size;
+ rmem->dev = dev;
+
+ list_add(&rmem->node, &rio_outb_mems);
+ return rmem;
+err:
+ rio_release_outb_region(mport, rmem);
+ return NULL;
+}
+
+/** rio_request_outb_region -- Request IO region and get outbound region
+ * for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev_id: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ * @owner: The outbound region owned driver
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. And it will find the RapidIO region owned by
+ * the driver id. Then map it. Be careful about that the ioremap can not
+ * be called in the interrupt event action function.
+ */
+struct rio_mem *rio_request_outb_region(struct rio_mport *mport, void *dev_id,
+ resource_size_t size, const char *name, u32 owner)
+{
+ struct rio_mem *rmem = NULL;
+ struct rio_dev *dev = dev_id;
+
+ if (!dev)
+ goto err;
+
+ rmem = rio_prepare_io_mem(mport, dev, size, name);
+ if (!rmem)
+ goto err;
+
+ if (rio_space_find_mem(mport, dev->destid, owner, &rmem->riores)) {
+ dev_err(mport->dev,
+ "Can not find RIO region meet the ownerid %x\n", owner);
+ goto err;
+ }
+
+ /* Map the rio space to local */
+ if (rio_map_outb_region(mport, dev->destid, rmem, 0)) {
+ dev_err(mport->dev, "RIO map outb error!\n");
+ goto err;
+ }
+ return rmem;
+err:
+ rio_release_outb_region(mport, rmem);
+ return NULL;
+}
+
+/**
* rio_mport_get_feature - query for devices' extended features
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
diff --git a/include/linux/rio.h b/include/linux/rio.h
index b96cdf4..b306e53 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -176,6 +176,7 @@ struct rio_mport {
struct rio_msg outb_msg[RIO_MAX_MBOX];
int host_deviceid; /* Host device ID */
struct rio_ops *ops; /* maintenance transaction functions */
+ struct rio_mem_ops *mops; /* Memory functions */
unsigned char id; /* port ID, unique among all ports */
unsigned char index; /* port index, unique among all port
interfaces of the same type */
@@ -185,6 +186,7 @@ struct rio_mport {
*/
enum rio_phy_type phy_type; /* RapidIO phy type */
unsigned char name[40];
+ struct device *dev;
void *priv; /* Master port private data */
};
@@ -319,6 +321,43 @@ struct rio_route_ops {
u16 table, u16 route_destid, u8 * route_port);
};
+/**
+ * Struct for RIO memory definition.
+ * @node: Node in list of memories
+ * @virt: The virtual address for mapped memory accessing.
+ * @owner: The owner id of this memory.
+ * @size: The size of memory space, it should same to iores and riores.
+ * @iores: The resource of local IO region for mapping.
+ * @riores: The resource of mapped RapidIO space region.
+ */
+struct rio_mem {
+ struct list_head node;
+ void *virt;
+ u32 owner;
+ struct rio_dev *dev;
+ resource_size_t size;
+ struct resource iores;
+ struct resource riores;
+};
+
+/**
+ * Struct for RIO memory definition.
+ * @map_inb: The function for mapping inbound memory window.
+ * @map_outb: The function for mapping outbound memory window.
+ * @unmap_inb: The function for unmapping inbound memory window.
+ * @unmap_outb: The function for unmapping outbound memory window.
+ */
+struct rio_mem_ops {
+ int (*map_inb) (struct rio_mport *, resource_size_t lstart,
+ resource_size_t rstart,
+ resource_size_t size, u32 flags);
+ int (*map_outb) (struct rio_mport *, resource_size_t lstart,
+ resource_size_t rstart,
+ resource_size_t size, u16 tid, u32 flags);
+ void (*unmap_inb) (struct rio_mport *, resource_size_t lstart);
+ void (*unmap_outb) (struct rio_mport *, resource_size_t lstart);
+};
+
/* Architecture and hardware-specific functions */
extern int rio_init_mports(void);
extern void rio_register_mport(struct rio_mport *);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index 7adb2a1..719b9da 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -334,6 +334,16 @@ static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
res->flags = RIO_RESOURCE_DOORBELL;
}
+static inline void rio_init_io_res(struct resource *res, resource_size_t start,
+ resource_size_t size, const char *name, unsigned long flag)
+{
+ memset(res, 0, sizeof(struct resource));
+ res->start = start;
+ res->end = start + size - 1;
+ res->name = name;
+ res->flags = flag;
+}
+
/**
* RIO_DEVICE - macro used to describe a specific RIO device
* @dev: the 16 bit RIO device ID
@@ -408,13 +418,33 @@ extern int rio_request_inb_dbell(struct rio_mport *, void *, u16, u16,
extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
+extern int rio_request_io_region(struct rio_mport *, struct resource *);
+extern int rio_alloc_io(struct rio_mport *mport, resource_size_t size,
+ const char *name, unsigned long flags, struct resource *res);
+extern struct rio_mem *rio_prepare_io_mem(struct rio_mport *, struct rio_dev *,
+ resource_size_t, const char *);
/* Memory region management */
-int rio_claim_resource(struct rio_dev *, int);
-int rio_request_regions(struct rio_dev *, char *);
-void rio_release_regions(struct rio_dev *);
-int rio_request_region(struct rio_dev *, int, char *);
-void rio_release_region(struct rio_dev *, int);
+extern struct rio_mem *rio_request_inb_region(struct rio_mport *, void *,
+ resource_size_t, const char *, u32);
+extern struct rio_mem *rio_request_outb_region(struct rio_mport *,
+ void *, resource_size_t, const char *, u32);
+extern int rio_release_inb_region(struct rio_mport *, struct rio_mem *);
+extern int rio_release_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory low-level mapping functions */
+extern int rio_map_inb_region(struct rio_mport *, struct rio_mem *, u32);
+extern int rio_map_outb_region(struct rio_mport *, u16, struct rio_mem *, u32);
+extern void rio_unmap_inb_region(struct rio_mport *, struct rio_mem *);
+extern void rio_unmap_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory Allocator */
+extern int rio_space_request(struct rio_mport *, resource_size_t,
+ struct resource *);
+extern int rio_space_find_mem(struct rio_mport *, u16, u32, struct resource *);
+extern int rio_space_init(struct rio_mport *);
+extern int rio_space_claim(struct rio_mem *);
+extern void rio_space_release(struct rio_mem *);
/* LDM support */
int rio_register_driver(struct rio_driver *);
@@ -464,6 +494,7 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
struct rio_dev *from);
+extern u32 rio_get_mport_id(struct rio_mport *);
#endif /* __KERNEL__ */
#endif /* LINUX_RIO_DRV_H */
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 12/17] Add RapidIO space allocation bitmap arithmetic.
2008-03-04 16:29 ` [PATCH 11/17] Add memory mapping driver to RapidIO Zhang Wei
2008-03-04 10:37 ` Stephen Rothwell
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 13/17] Add FSL RapidIO controller memory ops functions Zhang Wei
1 sibling, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The bitmap is the simplest RapidIO space allocation arithmetic.
It uses the fixed size space for each RapidIO device in the
inter-connection network.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 11 +
drivers/rapidio/Kconfig | 2 +
drivers/rapidio/Makefile | 1 +
drivers/rapidio/rio.c | 1 +
drivers/rapidio/sallocator/Kconfig | 9 +
drivers/rapidio/sallocator/Makefile | 12 +
drivers/rapidio/sallocator/bitmap.c | 384 +++++++++++++++++++++++++++++++++++
include/linux/rio.h | 6 +-
8 files changed, 425 insertions(+), 1 deletions(-)
create mode 100644 drivers/rapidio/sallocator/Kconfig
create mode 100644 drivers/rapidio/sallocator/Makefile
create mode 100644 drivers/rapidio/sallocator/bitmap.c
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 068d822..d793084 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -923,6 +923,17 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
return rc;
}
+u32 rio_get_mport_id(struct rio_mport *mport)
+{
+ u32 mport_id;
+
+ rio_local_read_config_32(mport, 0x60, &mport_id);
+ mport_id = mport->sys_size ? (mport_id & 0xffff) :
+ ((mport_id >> 16) & 0xff);
+ return mport_id;
+
+}
+
static char *cmdline = NULL;
static int fsl_rio_get_hdid(int index)
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index c32822a..fde2bb3 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -8,3 +8,5 @@ config RAPIDIO_DISC_TIMEOUT
---help---
Amount of time a discovery node waits for a host to complete
enumeration before giving up.
+
+source "drivers/rapidio/sallocator/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 7c0e181..e5b2f11 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,3 +4,4 @@
obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
obj-$(CONFIG_RAPIDIO) += switches/
+obj-$(CONFIG_RAPIDIO) += sallocator/
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 0dc365d..afd4da6 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -844,6 +844,7 @@ int rio_init_mports(void)
rio_enum_mport(port);
else
rio_disc_mport(port);
+ rio_space_init(port);
}
out:
diff --git a/drivers/rapidio/sallocator/Kconfig b/drivers/rapidio/sallocator/Kconfig
new file mode 100644
index 0000000..a33a1b8
--- /dev/null
+++ b/drivers/rapidio/sallocator/Kconfig
@@ -0,0 +1,9 @@
+choice
+ prompt "Default RapidIO Space Allocator"
+ depends on RAPIDIO
+ default RIO_SA_DEFAULT_BITMAP
+
+ config RIO_SA_DEFAULT_BITMAP
+ bool "Bitmap"
+
+endchoice
diff --git a/drivers/rapidio/sallocator/Makefile b/drivers/rapidio/sallocator/Makefile
new file mode 100644
index 0000000..437201c
--- /dev/null
+++ b/drivers/rapidio/sallocator/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+#
+# Author: Zhang Wei, wei.zhang@freescale.com, Jun 2007
+#
+# This is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+
+obj-$(CONFIG_RIO_SA_DEFAULT_BITMAP) += bitmap.o
diff --git a/drivers/rapidio/sallocator/bitmap.c b/drivers/rapidio/sallocator/bitmap.c
new file mode 100644
index 0000000..39a5250
--- /dev/null
+++ b/drivers/rapidio/sallocator/bitmap.c
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Author: Zhang Wei, wei.zhang@freescale.com, Jun 2007
+ *
+ * Description:
+ * RapidIO space allocator bitmap arithmetic.
+ *
+ * The Bitmap allocator make the whole RapidIO device have the same fixed
+ * inbound memory window. And on the top of each device inbound window,
+ * there is a sect0 area, which will use for recording the individual
+ * driver owned memory space in device.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+
+#include "../rio.h"
+
+#undef DEBUG
+
+#define RIO_SBLOCK_SIZE 4096
+
+#define ERR(fmt, arg...) \
+ printk(KERN_ERR "ERROR %s - %s: " fmt, __FILE__, __FUNCTION__, ## arg)
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...) do {} while (0)
+#endif
+
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+#define SA_BITMAP_DRV_ID 0x4249544d
+#define SA_RIO_RESERVE_SPACE 0x4000000
+
+/* Definition for struct rio_res:ctrl */
+#define SA_RIO_RES_CTRL_EN 0x80000000
+struct rio_res {
+ u32 ctrl; /* Control words
+ * Bit 31: Enable bit.
+ */
+ u32 addr; /* The start addr bits [0-31] of RapidIO window */
+ u32 extaddr; /* The start addr bits [32-63] of RapidIO window */
+ u32 size; /* The size bits [0-31] of RapidIO window */
+ u32 extsize; /* The size bits [32-63] of RapidIO window */
+ u32 owner; /* The owner driver id */
+ u32 rev[2]; /* For align 32 bytes */
+};
+
+#define SA_BITMAP_MAX_INB_RES 32
+struct rio_sect0 {
+ u32 id; /* ID for Bitmap space allocater driver */
+ u32 rioid; /* RapidIO device id */
+ u32 width; /* The resource width for RIO space, 32 or 64 */
+ u8 rev1[56]; /* Align to 64 bytes */
+ struct rio_res inb_res[SA_BITMAP_MAX_INB_RES];
+ u8 rev2[4096 - 64 - SA_BITMAP_MAX_INB_RES * 32];
+ /* Fill for 4096 bytes */
+};
+
+/* if select 64bit resource, we can use 34-bit rio address, otherwise 32-bit */
+static int rio_addr_size;
+static struct resource *root;
+static struct rio_mem sect0mem; /* Sect 0 memory data */
+static struct rio_sect0 *sect0;
+static struct rio_mem *sblock_buf;
+
+/**
+ * get_rio_addr_size -- get the RapidIO space address size.
+ *
+ * If it's a 64-bit system, the RapidIO space address size could be 34bit,
+ * otherwise, it should be 32 bit.
+ */
+static inline int get_rio_addr_size(void)
+{
+ return (sizeof(resource_size_t) == 8) ? 34 : 32;
+}
+
+/**
+ * rio_space_request -- request RapidIO space.
+ * @mport: RIO master port.
+ * @size: The request space size, must >= 4096.
+ * @new: The resource which required.
+ *
+ * Return:
+ * 0 -- Success
+ * others -- return from allocate_resource()
+ *
+ * This function request a memory from RapidIO space.
+ */
+int rio_space_request(struct rio_mport *mport, resource_size_t size,
+ struct resource *new)
+{
+ int ret = 0;
+
+ /* Align the size to 2^N */
+ size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ memset(new, 0, sizeof(struct resource));
+
+ ret = allocate_resource(root, new, size, root->start, root->end,
+ size, NULL, 0);
+ return ret;
+}
+
+#ifdef DEBUG
+/**
+ * rio_sa_dump_sect0 -- Dump the sect0 content.
+ * @psect0: The point of sect0
+ */
+static void rio_sa_dump_sect0(struct rio_sect0 *psect0)
+{
+ int i;
+
+ if (!psect0)
+ return;
+
+ printk(KERN_DEBUG "Rio Sect0 %p dump:\n", psect0);
+ printk(KERN_DEBUG "...id = 0x%08x, width = %d, rioid = %d\n",
+ psect0->id, psect0->width, psect0->rioid);
+ for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+ if (psect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)
+ printk(KERN_DEBUG
+ "...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+ "\t\textaddr 0x%08x, addr 0x%08x\n"
+ "\t\textsize 0x%08x, size 0x%08x\n", i,
+ psect0->inb_res[i].ctrl,
+ psect0->inb_res[i].owner,
+ psect0->inb_res[i].extaddr,
+ psect0->inb_res[i].addr,
+ psect0->inb_res[i].extsize,
+ psect0->inb_res[i].size);
+}
+#endif
+
+/**
+ * rio_space_claim -- Claim the memory in RapidIO space
+ * @mem: The memory should be claimed.
+ *
+ * When you get a memory space and get ready of it, you should claim it in
+ * RapidIO space. Then, the other device could get the memory by calling
+ * rio_space_find_mem().
+ */
+int rio_space_claim(struct rio_mem *mem)
+{
+ int i;
+
+ if (!sect0) {
+ ERR("Sect0 is NULL!\n");
+ return -EFAULT;
+ }
+#ifdef DEBUG
+ rio_sa_dump_sect0(sect0);
+#endif
+
+ for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+ if (!(sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)) {
+ sect0->inb_res[i].ctrl |= SA_RIO_RES_CTRL_EN;
+ sect0->inb_res[i].addr = (u32)(mem->riores.start);
+ sect0->inb_res[i].size = (u32)(mem->riores.end
+ - mem->riores.start + 1);
+ if (IS_64BIT_RES) {
+ sect0->inb_res[i].extaddr =
+ (u64)mem->riores.start >> 32;
+ sect0->inb_res[i].extsize =
+ (u64)(mem->riores.end
+ - mem->riores.start + 1) >> 32;
+ }
+ sect0->inb_res[i].owner = mem->owner;
+ DBG("The new inbound rio mem added:\n");
+ DBG("...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+ "\t\textaddr 0x%08x, addr 0x%08x\n"
+ "\t\textsize 0x%08x, size 0x%08x\n", i,
+ sect0->inb_res[i].ctrl,
+ sect0->inb_res[i].owner,
+ sect0->inb_res[i].extaddr,
+ sect0->inb_res[i].addr,
+ sect0->inb_res[i].extsize,
+ sect0->inb_res[i].size);
+ return 0;
+ }
+
+ ERR("No free inbound window!\n");
+ return -EBUSY;
+}
+
+/**
+ * rio_space_release -- remove the memory record from RapidIO space.
+ * It's the pair function of rio_space_claim().
+ *
+ * @inbmem: The memory should be release.
+ */
+void rio_space_release(struct rio_mem *inbmem)
+{
+ int i;
+
+ /* Remove it from sect0 inb_res array */
+ for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+ if ((sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN) &&
+ (((u64)sect0->inb_res[i].extaddr << 32 |
+ sect0->inb_res[i].addr)
+ == (u64)inbmem->riores.start)) {
+ sect0->inb_res[i].ctrl = 0;
+ sect0->inb_res[i].addr = 0;
+ sect0->inb_res[i].extaddr = 0;
+ sect0->inb_res[i].size = 0;
+ sect0->inb_res[i].extsize = 0;
+ }
+}
+
+/**
+ * rio_space_get_dev_mem -- get the whole owned inbound space of
+ * RapidIO device with did.
+ */
+static int rio_space_get_dev_mem(struct rio_mport *mport,
+ u16 did, struct resource *res)
+{
+ if (!res)
+ return -EINVAL;
+
+ res->start = SA_RIO_RESERVE_SPACE + (did
+ << (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+ + 1)));
+ res->end = res->start +
+ (1 << (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+ + 1))) - 1;
+ res->flags = RIO_RESOURCE_MEM;
+
+ return 0;
+}
+
+/**
+ * rio_space_find_mem -- Find the memory space (RIO) of the rio driver owned.
+ * @mport: RIO master port.
+ * @tid: The target RapidIO device id which will be searched.
+ * @owner: The driver id as the search keyword.
+ * @res: The result of finding.
+ *
+ * return:
+ * 0 -- Success
+ * -EFAULT -- Remote sect0 is a bad address
+ * -EPROTONOSUPPORT -- The remote space allocator protocol is not support
+ *
+ * This function will find the memory located in RapidIO space, which is owned
+ * by the driver. If the remote RapidIO device use the diffrent space allocator,
+ * it will return -EPROTONOSUPPORT.
+ */
+int rio_space_find_mem(struct rio_mport *mport, u16 tid,
+ u32 owner, struct resource *res)
+{
+ struct rio_sect0 __iomem *rsect0;
+ int i;
+ int ret = 0;
+ u32 width;
+
+ ret = rio_space_get_dev_mem(mport, tid, &sblock_buf->riores);
+ if (ret) {
+ ERR("Rio space get dev memory err!\n");
+ goto out;
+ }
+ sblock_buf->size = RIO_SBLOCK_SIZE;
+ rio_map_outb_region(mport, tid, sblock_buf, 0);
+
+ if (!sblock_buf->virt) {
+ ERR("Sect0 block buffer is NULL!\n");
+ ret = -EFAULT;
+ goto out;
+ }
+ rsect0 = sblock_buf->virt;
+
+ if (in_be32(&rsect0->id) != SA_BITMAP_DRV_ID) {
+ DBG("The target RapidIO space allocator is not rio_sa_bitmap! "
+ "id = 0x%x\n", rsect0->id);
+ ret = -EPROTONOSUPPORT;
+ goto out;
+ }
+
+#ifdef DEBUG
+ /* Dump remote sect0 for debug */
+ DBG("Dump the remote RIO dev %d sect0\n", tid);
+ rio_sa_dump_sect0(rsect0);
+#endif
+
+ width = in_be32(&rsect0->width);
+ if (sizeof(resource_size_t) * 8 < width)
+ printk(KERN_WARNING "WARNING: The system width %d is smaller "
+ "than the remote RapidIO space address width %d!",
+ sizeof(resource_size_t) * 8, width);
+
+ /* Find the rio space block */
+ for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+ if ((in_be32(&rsect0->inb_res[i].ctrl) & SA_RIO_RES_CTRL_EN)
+ && (in_be32(&rsect0->inb_res[i].owner) == owner )) {
+ if (!res) {
+ ERR("Resource NULL error!\n");
+ ret = -EFAULT;
+ goto out;
+ }
+ memset(res, 0, sizeof(struct resource));
+ res->start = (IS_64BIT_RES && (width > 32)) ?
+ in_be32(&rsect0->inb_res[i].extaddr) << 32 : 0
+ | rsect0->inb_res[i].addr;
+ res->end = res->start - 1 +
+ ((in_be32(&rsect0->inb_res[i].size)) |
+ ((IS_64BIT_RES && (width > 32)) ?
+ ((u64)(in_be32(&rsect0->inb_res[i].extsize))
+ << 32) : 0));
+ goto out;
+ }
+
+out:
+ rio_unmap_outb_region(mport, sblock_buf);
+ return ret;
+}
+
+/**
+ * rio_space_init -- RapidIO space allocator initialization function.
+ * @mport: The master port.
+ */
+int rio_space_init(struct rio_mport *mport)
+{
+ int rc;
+
+ root = &mport->riores[RIO_INB_MEM_RESOURCE];
+ memset(root, 0, sizeof(struct resource));
+
+ rio_addr_size = get_rio_addr_size();
+
+ rc = rio_space_get_dev_mem(mport, rio_get_mport_id(mport), root);
+ if (rc) {
+ ERR("bitmap: get rio dev memory err, rc = %d\n", rc);
+ return rc;
+ }
+ root->name = "rio_space_inb";
+
+ /* Alloc the sect 0 for space managerment */
+ memset(§0mem, 0, sizeof(struct rio_mem));
+ sect0mem.virt = dma_alloc_coherent(NULL, RIO_SBLOCK_SIZE,
+ §0mem.iores.start, GFP_KERNEL);
+ if (!sect0mem.virt)
+ return -ENOMEM;
+
+ sect0mem.iores.end = sect0mem.iores.start + RIO_SBLOCK_SIZE - 1;
+ sect0mem.size = RIO_SBLOCK_SIZE;
+
+ if (rio_space_request(mport, RIO_SBLOCK_SIZE, §0mem.riores))
+ return -ENOMEM;
+
+ sect0mem.riores.name = "sect 0";
+ sect0 = sect0mem.virt;
+ sect0->id = SA_BITMAP_DRV_ID;
+ sect0->rioid = rio_get_mport_id(mport);
+ sect0->width = rio_addr_size;
+
+ /* map outbond window to access rio inb */
+ rio_map_inb_region(mport, §0mem, 0);
+
+ /* Init sblock buffer for block seeking */
+ sblock_buf = rio_prepare_io_mem(mport, NULL, RIO_SBLOCK_SIZE,
+ "sblock_buf");
+ if (!sblock_buf)
+ return -ENOMEM;
+
+ return 0;
+}
diff --git a/include/linux/rio.h b/include/linux/rio.h
index b306e53..d8ff4b8 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -60,11 +60,15 @@
*
* 0 RapidIO inbound doorbells
* 1 RapidIO inbound mailboxes
- * 1 RapidIO outbound mailboxes
+ * 2 RapidIO outbound mailboxes
+ * 3 RapidIO inbound memory
+ * 4 RapidIO outbound memory
*/
#define RIO_DOORBELL_RESOURCE 0
#define RIO_INB_MBOX_RESOURCE 1
#define RIO_OUTB_MBOX_RESOURCE 2
+#define RIO_INB_MEM_RESOURCE 3
+#define RIO_OUTB_MEM_RESOURCE 4
extern struct bus_type rio_bus_type;
extern struct list_head rio_devices; /* list of all devices */
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 13/17] Add FSL RapidIO controller memory ops functions.
2008-03-04 16:29 ` [PATCH 12/17] Add RapidIO space allocation bitmap arithmetic Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 14/17] Add the RapidIO master port maintance and doorbell window to space resources Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Add FSL RapidIO controller (MPC85xx, MPC86xx) memory operation
functions, which include map inbound/outbound window and
unmap incound/outbound window.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 202 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 202 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index d793084..c260ae5 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -30,6 +30,8 @@
#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_P_MSG_REGS_OFFSET 0x11000
#define RIO_S_MSG_REGS_OFFSET 0x13000
@@ -39,6 +41,15 @@
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
+#define RIO_MAX_INB_ATMU 4
+#define RIO_MAX_OUTB_ATMU 8
+#define RIO_INB_ATMU_REGS_OFFSET 0x10de0
+#define RIO_ATMU_EN_MASK 0x80000000
+
+#define RIO_NREAD 0x4
+#define RIO_NWRITE 0x4
+#define RIO_NWRITE_R 0x5
+#define RIO_NREAD_R 0x5
#define RIO_MSG_OMR_MUI 0x00000002
#define RIO_MSG_OSR_TE 0x00000080
@@ -82,6 +93,15 @@ struct rio_atmu_regs {
u32 pad3[3];
};
+struct rio_inb_atmu_regs {
+ u32 riwtar;
+ u32 pad1;
+ u32 riwbar;
+ u32 pad2;
+ u32 riwar;
+ u32 pad3[3];
+};
+
struct rio_msg_regs {
u32 omr;
u32 osr;
@@ -334,6 +354,180 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
}
/**
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, resource_size_t lstart,
+ resource_size_t rstart, resource_size_t size, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD_R << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ dev_err(mport->dev, "The local address 0x%x can not be aligned "
+ "to the same size 0x%x with the RapidIO space "
+ "address 0x%x!\n", lstart, size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free inbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+ i++, inbatmu--)
+ ;
+
+ if (i > RIO_MAX_INB_ATMU) {
+ dev_err(mport->dev, "No free inbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&inbatmu->riwtar, ((IS_64BIT_RES ? (lstart >> 32)
+ & 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwbar, ((IS_64BIT_RES ? (rstart >> 32)
+ & 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, resource_size_t lstart,
+ resource_size_t rstart, resource_size_t size,
+ u16 tid, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ dev_err(mport->dev, "The local address 0x%x can not be aligned "
+ "to the same size 0x%x with the RapidIO space address "
+ "0x%x!\n", lstart, size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free outbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+ i++, outbatmu++)
+ ;
+
+ if (i > RIO_MAX_OUTB_ATMU) {
+ dev_err(mport->dev, "No free outbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+ | ((IS_64BIT_RES ? (rstart >> 32) & 0x3 : 0) << 20)
+ | ((rstart >> 12) & 0xfffff));
+ if (mport->phy_type == RIO_PHY_SERIAL)
+ out_be32(&outbatmu->rowtear, tid >> 10);
+ out_be32(&outbatmu->rowbar, ((IS_64BIT_RES ?
+ (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff));
+ out_be32(&outbatmu->rowar, 0x80000000
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+ /* Search for inbound ATMU */
+ for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+ u32 tar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (inbatmu->riwtar == tar) {
+ out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping outbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport, resource_size_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+ /* Search for outbound ATMU */
+ for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+ u32 bar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (outbatmu->rowbar == bar) {
+ out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
* rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
* @mport: Master port with outbound message queue
* @rdev: Target of outbound message
@@ -956,6 +1150,13 @@ static int fsl_rio_get_cmdline(char *s)
__setup("riohdid=", fsl_rio_get_cmdline);
+static struct rio_mem_ops fsl_mem_ops = {
+ .map_inb = fsl_rio_map_inb_mem,
+ .map_outb = fsl_rio_map_outb_mem,
+ .unmap_inb = fsl_rio_unmap_inb_mem,
+ .unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
@@ -1099,6 +1300,7 @@ int fsl_rio_setup(struct of_device *dev)
strcpy(port->name, "RIO0 mport");
port->ops = ops;
+ port->mops = &fsl_mem_ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
port->priv = priv;
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 14/17] Add the RapidIO master port maintance and doorbell window to space resources.
2008-03-04 16:29 ` [PATCH 13/17] Add FSL RapidIO controller memory ops functions Zhang Wei
@ 2008-03-04 16:29 ` Zhang Wei
2008-03-04 16:30 ` [PATCH 15/17] Add RapidIO proc fs for memory mapping debugging Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:29 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Add the RapidIO master port maintance and doorbell IO windows to
RIO space resources.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 26 +++++++++++++++++++++-----
include/linux/rio.h | 1 +
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index c260ae5..350db4e 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -192,6 +192,8 @@ struct rio_priv {
int bellirq;
int txirq;
int rxirq;
+ struct resource maint_res;
+ struct resource dbell_res;
};
/**
@@ -1363,15 +1365,29 @@ int fsl_rio_setup(struct of_device *dev)
out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
- out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
- out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
+ rio_init_io_res(&priv->maint_res, law_start, RIO_MAINT_WIN_SIZE,
+ "maint_win", RIO_RESOURCE_MAINT);
+ rc = rio_request_io_region(port, &priv->maint_res);
+ if (rc) {
+ dev_err(&dev->dev, "request maint window error!\n");
+ goto err;
+ }
+ out_be32(&priv->maint_atmu_regs->rowbar, (law_start >> 12) & 0xffffff);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077000
+ | (__ilog2(RIO_MAINT_WIN_SIZE) - 1));
priv->maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
/* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
- fsl_rio_doorbell_init(port);
+ rio_init_io_res(&priv->dbell_res, law_start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE, "dbell_win", RIO_RESOURCE_DOORBELL);
+ out_be32(&priv->dbell_atmu_regs->rowbar, (priv->dbell_res.start >> 12)
+ & 0xffffff);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x80042000
+ | (__ilog2(RIO_DBELL_WIN_SIZE) - 1));
+ rc = fsl_rio_doorbell_init(port);
+ if (rc)
+ goto err;
return 0;
err:
diff --git a/include/linux/rio.h b/include/linux/rio.h
index d8ff4b8..c4acb52 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -257,6 +257,7 @@ struct rio_ops {
#define RIO_RESOURCE_MEM 0x00000100
#define RIO_RESOURCE_DOORBELL 0x00000200
#define RIO_RESOURCE_MAILBOX 0x00000400
+#define RIO_RESOURCE_MAINT 0x00000800
#define RIO_RESOURCE_CACHEABLE 0x00010000
#define RIO_RESOURCE_PCI 0x00020000
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 15/17] Add RapidIO proc fs for memory mapping debugging.
2008-03-04 16:29 ` [PATCH 14/17] Add the RapidIO master port maintance and doorbell window to space resources Zhang Wei
@ 2008-03-04 16:30 ` Zhang Wei
2008-03-04 16:30 ` [PATCH 16/17] Change RapidIO doorbell source and target ID field to 16-bit Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:30 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Get RapidIO space resource by catting /proc/riores.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
drivers/rapidio/Kconfig | 8 +++
drivers/rapidio/rio.c | 119 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 127 insertions(+), 0 deletions(-)
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index fde2bb3..f669108 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -9,4 +9,12 @@ config RAPIDIO_DISC_TIMEOUT
Amount of time a discovery node waits for a host to complete
enumeration before giving up.
+config RAPIDIO_PROC_FS
+ bool "I/O and Memory resource debug"
+ depends on RAPIDIO && PROC_FS
+ default y
+ ---help---
+ Enable this option, it will create a /proc/riores node for
+ monitoring the RapidIO I/O and Memory resource.
+
source "drivers/rapidio/sallocator/Kconfig"
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index afd4da6..bbab7ac 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,6 +31,9 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
#include <linux/hardirq.h>
@@ -867,3 +870,119 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+
+#ifdef CONFIG_RAPIDIO_PROC_FS
+enum { MAX_IORES_LEVEL = 5 };
+
+struct riors {
+ struct rio_mport *mp;
+ int res;
+ struct resource *p;
+} riomres;
+
+static void *r_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct resource *p = v;
+ struct riors *rs = m->private;
+
+ (*pos)++;
+ if (p->child)
+ return p->child;
+ while (!p->sibling && p->parent)
+ p = p->parent;
+ if (p->sibling)
+ return p->sibling;
+ else {
+ rs->res++;
+ if(rs->res >= RIO_MAX_MPORT_RESOURCES) {
+ rs->mp = list_entry(rs->mp->node.next, struct rio_mport, node);
+ rs->res = 0;
+ if (&rs->mp->node == &rio_mports)
+ return NULL;
+ }
+ seq_printf(m, "%2d: ", rs->res);
+ rs->p = &rs->mp->riores[rs->res];
+ p = rs->p;
+
+ return p;
+ }
+}
+
+static void *r_start(struct seq_file *m, loff_t *pos)
+{
+ struct riors *rs = m->private;
+ struct resource *p;
+
+ if (*pos) {
+ *pos = 0;
+ return NULL;
+ }
+
+ rs->mp = list_entry(rio_mports.next, struct rio_mport, node);
+ rs->res = -1;
+ rs->p = &rs->mp->iores;
+ p = rs->p;
+
+ seq_printf(m, "IO: ");
+
+ return p;
+}
+
+static void r_stop(struct seq_file *m, void *v)
+{
+}
+
+static int r_show(struct seq_file *m, void *v)
+{
+ struct riors *rs = m->private;
+ struct resource *root = rs->p;
+ struct resource *r = v, *p;
+ int width = root->end < 0x10000 ? 4 : 8;
+ int depth;
+
+ for (depth = 0, p = r; p->parent && depth < MAX_IORES_LEVEL; depth++, p = p->parent)
+ if (p == root)
+ break;
+ seq_printf(m, "%*s%0*llx-%0*llx : %s\n",
+ depth * 2, "",
+ width, (unsigned long long) r->start,
+ width, (unsigned long long) r->end,
+ r->name ? r->name : "<BAD>");
+ return 0;
+}
+
+static const struct seq_operations resource_op = {
+ .start = r_start,
+ .next = r_next,
+ .stop = r_stop,
+ .show = r_show,
+};
+
+static int riores_open(struct inode *inode, struct file *file)
+{
+ int res = seq_open(file, &resource_op);
+ if (!res) {
+ struct seq_file *m = file->private_data;
+ m->private = &riomres;
+ }
+ return res;
+}
+
+static const struct file_operations proc_riores_operations = {
+ .open = riores_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init rioresources_init(void)
+{
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_entry("riores", 0, NULL);
+ if (entry)
+ entry->proc_fops = &proc_riores_operations;
+ return 0;
+}
+__initcall(rioresources_init);
+#endif
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 16/17] Change RapidIO doorbell source and target ID field to 16-bit.
2008-03-04 16:30 ` [PATCH 15/17] Add RapidIO proc fs for memory mapping debugging Zhang Wei
@ 2008-03-04 16:30 ` Zhang Wei
2008-03-04 16:30 ` [PATCH 17/17] Add the memory mapping support in rionet driver Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:30 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
Change RapidIO doorbell source and target ID field to 16-bit for
support large system size, which max rio devid is 65535.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 350db4e..e2c7952 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -75,13 +75,13 @@
#define DOORBELL_DSR_TE 0x00000080
#define DOORBELL_DSR_QFI 0x00000010
#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x03
-#define DOORBELL_SID_OFFSET 0x05
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
#define DOORBELL_INFO_OFFSET 0x06
#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
struct rio_atmu_regs {
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH 17/17] Add the memory mapping support in rionet driver.
2008-03-04 16:30 ` [PATCH 16/17] Change RapidIO doorbell source and target ID field to 16-bit Zhang Wei
@ 2008-03-04 16:30 ` Zhang Wei
0 siblings, 0 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-04 16:30 UTC (permalink / raw)
To: mporter, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The user can select memory mapping mode or message mode in CONFIG.
It is also an example to how-to use memory mapping driver for RapidIO.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
drivers/net/Kconfig | 10 ++
drivers/net/rionet.c | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 331 insertions(+), 0 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 50c2b60..1e47a86 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2695,6 +2695,16 @@ config RIONET_RX_SIZE
depends on RIONET
default "128"
+config RIONET_MEMMAP
+ bool "Use memory map instead of message"
+ depends on RIONET
+ default n
+
+config RIONET_DMA
+ bool "Use DMA for memory mapping data transfer"
+ depends on RIONET_MEMMAP && FSL_DMA
+ default y
+
config FDDI
bool "FDDI driver support"
depends on (PCI || EISA || TC)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 6aa9731..53b53a8 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -1,6 +1,13 @@
/*
* rionet - Ethernet driver over RapidIO messaging services
*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Author: Zhang Wei, wei.zhang@freescale.com, Jun 2007
+ *
+ * Changelog:
+ * Jun 2007 Zhang Wei <wei.zhang@freescale.com>
+ * - Added the support to RapidIO memory driver. 2007.
+ *
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
@@ -8,6 +15,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
#include <linux/module.h>
@@ -23,6 +31,7 @@
#include <linux/skbuff.h>
#include <linux/crc32.h>
#include <linux/ethtool.h>
+#include <linux/dmaengine.h>
#define DRV_NAME "rionet"
#define DRV_VERSION "0.2"
@@ -40,13 +49,47 @@ MODULE_LICENSE("GPL");
NETIF_MSG_TX_ERR)
#define RIONET_DOORBELL_JOIN 0x1000
+#ifdef CONFIG_RIONET_MEMMAP
+#define RIONET_DOORBELL_SEND 0x1001
+#define RIONET_DOORBELL_LEAVE 0x1002
+#else
#define RIONET_DOORBELL_LEAVE 0x1001
+#endif
#define RIONET_MAILBOX 0
#define RIONET_TX_RING_SIZE CONFIG_RIONET_TX_SIZE
#define RIONET_RX_RING_SIZE CONFIG_RIONET_RX_SIZE
+#define ERR(fmt, arg...) \
+ printk(KERN_ERR "ERROR %s - %s: " fmt, __FILE__, __FUNCTION__, ## arg)
+
+#ifdef CONFIG_RIONET_MEMMAP
+/* Definitions for rionet memory map driver */
+#define RIONET_DRVID 0x101
+#define RIONET_MAX_SK_DATA_SIZE 0x1000
+#define RIONET_TX_RX_BUFF_SIZE (0x1000 * (128 + 128))
+#define RIONET_QUEUE_NEXT(x) (((x) < 127) ? ((x) + 1) : 0)
+#define RIONET_QUEUE_INC(x) (x = RIONET_QUEUE_NEXT(x))
+
+struct sk_data {
+ u8 data[0x1000];
+};
+
+#define RIONET_SKDATA_EN 0x80000000
+struct rionet_tx_rx_buff {
+ volatile int enqueue; /* enqueue point */
+ volatile int dequeue; /* dequeue point */
+ u32 size[128]; /* size[i] is skdata[i] size
+ * the most high bit [31] is
+ * enable bit. The
+ * max size is 4096.
+ */
+ u8 rev1[3576];
+ struct sk_data skdata[128]; /* all size are 0x1000 * 128 */
+};
+#endif /* CONFIG_RIONET_MEMMAP */
+
static LIST_HEAD(rionet_peers);
struct rionet_private {
@@ -60,6 +103,18 @@ struct rionet_private {
spinlock_t lock;
spinlock_t tx_lock;
u32 msg_enable;
+#ifdef CONFIG_RIONET_MEMMAP
+ struct rionet_tx_rx_buff *rxbuff;
+ struct rionet_tx_rx_buff __iomem *txbuff;
+ struct rio_mem *rxmem;
+ struct rio_mem *txmem;
+#ifdef CONFIG_RIONET_DMA
+ struct dma_chan *txdmachan;
+ struct dma_chan *rxdmachan;
+ struct dma_client rio_dma_client;
+ spinlock_t rio_dma_event_lock;
+#endif
+#endif
};
struct rionet_peer {
@@ -108,9 +163,11 @@ static int rionet_rx_clean(struct net_device *ndev)
rnet->rx_skb[i]->data = data;
skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE);
+ rnet->rx_skb[i]->dev = ndev;
rnet->rx_skb[i]->protocol =
eth_type_trans(rnet->rx_skb[i], ndev);
error = netif_rx(rnet->rx_skb[i]);
+ rnet->rx_skb[i] = NULL;
if (error == NET_RX_DROP) {
ndev->stats.rx_dropped++;
@@ -141,19 +198,96 @@ static void rionet_rx_fill(struct net_device *ndev, int end)
if (!rnet->rx_skb[i])
break;
+#ifndef CONFIG_RIONET_MEMMAP
rio_add_inb_buffer(rnet->mport, RIONET_MAILBOX,
rnet->rx_skb[i]->data);
+#endif
} while ((i = (i + 1) % RIONET_RX_RING_SIZE) != end);
rnet->rx_slot = i;
}
+#ifdef CONFIG_RIONET_MEMMAP
+static int rio_send_mem(struct sk_buff *skb,
+ struct net_device *ndev, struct rio_dev *rdev)
+{
+ struct rionet_private *rnet = ndev->priv;
+ int enqueue, dequeue;
+ int err;
+
+ if (!rdev)
+ return -EFAULT;
+
+ if (skb->len > RIONET_MAX_SK_DATA_SIZE) {
+ printk("Net frame len more than RIONET max sk_data size!\n");
+ return -EINVAL;
+ }
+
+ err = rio_space_find_mem(rnet->mport, rdev->destid, RIONET_DRVID,
+ &rnet->txmem->riores);
+ if (err) {
+ ndev->stats.tx_dropped++;
+ printk("err %d\n", err);
+ return -EBUSY;
+ }
+ rio_map_outb_region(rnet->mport, rdev->destid, rnet->txmem, 0);
+
+ enqueue = in_be32(&rnet->txbuff->enqueue);
+ dequeue = in_be32(&rnet->txbuff->dequeue);
+
+ if (!(in_be32(&rnet->txbuff->size[enqueue]) & RIONET_SKDATA_EN)
+ && (RIONET_QUEUE_NEXT(enqueue) != dequeue)) {
+#ifdef CONFIG_RIONET_DMA
+ struct dma_device *dmadev;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t tx_cookie = 0;
+
+ dmadev = rnet->txdmachan->device;
+ tx = dmadev->device_prep_dma_memcpy(rnet->txdmachan, skb->len,
+ 0);
+ if (!tx)
+ return;
+ tx->ack = 1;
+ tx->tx_set_dest((void *)rnet->txbuff->skdata[enqueue].data
+ - (void *)rnet->txbuff
+ + rnet->txmem->iores.start, tx, 0);
+ tx->tx_set_src(dma_map_single(&ndev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE), tx, 0);
+ tx_cookie = tx->tx_submit(tx);
+
+ dma_async_memcpy_issue_pending(rnet->txdmachan);
+ while (dma_async_memcpy_complete(rnet->txdmachan,
+ tx_cookie, NULL, NULL) == DMA_IN_PROGRESS) ;
+#else
+ memcpy(rnet->txbuff->skdata[enqueue].data, skb->data, skb->len);
+#endif /* CONFIG_RIONET_DMA */
+ out_be32(&rnet->txbuff->size[enqueue],
+ RIONET_SKDATA_EN | skb->len);
+ out_be32(&rnet->txbuff->enqueue,
+ RIONET_QUEUE_NEXT(enqueue));
+ in_be32(&rnet->txbuff->enqueue); /* verify read */
+ } else if (netif_msg_tx_err(rnet))
+ printk("txbuff is busy!\n");
+
+ rio_unmap_outb_region(rnet->mport, rnet->txmem);
+ rio_send_doorbell(rdev, RIONET_DOORBELL_SEND);
+ return 0;
+}
+#endif
+
static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev,
struct rio_dev *rdev)
{
struct rionet_private *rnet = ndev->priv;
+#ifdef CONFIG_RIONET_MEMMAP
+ int ret = 0;
+ ret = rio_send_mem(skb, ndev, rdev);
+ if (ret)
+ return ret;
+#else
rio_add_outb_message(rnet->mport, rdev, 0, skb->data, skb->len);
+#endif
rnet->tx_skb[rnet->tx_slot] = skb;
ndev->stats.tx_packets++;
@@ -165,6 +299,19 @@ static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev,
++rnet->tx_slot;
rnet->tx_slot &= (RIONET_TX_RING_SIZE - 1);
+#ifdef CONFIG_RIONET_MEMMAP
+ while (rnet->tx_cnt && (rnet->ack_slot != rnet->tx_slot)) {
+ /* dma unmap single */
+ dev_kfree_skb_any(rnet->tx_skb[rnet->ack_slot]);
+ rnet->tx_skb[rnet->ack_slot] = NULL;
+ ++rnet->ack_slot;
+ rnet->ack_slot &= (RIONET_TX_RING_SIZE - 1);
+ rnet->tx_cnt--;
+ }
+
+ if (rnet->tx_cnt < RIONET_TX_RING_SIZE)
+ netif_wake_queue(ndev);
+#endif
if (netif_msg_tx_queued(rnet))
printk(KERN_INFO "%s: queued skb %8.8x len %8.8x\n", DRV_NAME,
(u32) skb, skb->len);
@@ -211,6 +358,92 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
return 0;
}
+#ifdef CONFIG_RIONET_MEMMAP
+static void rio_recv_mem(struct net_device *ndev)
+{
+ struct rionet_private *rnet = (struct rionet_private *)ndev->priv;
+ struct sk_buff *skb;
+ u32 enqueue, dequeue, size;
+ int error = 0;
+ dma_cookie_t rx_cookie = 0;
+#ifdef CONFIG_RIONET_DMA
+ struct dma_device *dmadev;
+ struct dma_async_tx_descriptor *tx;
+#endif
+
+ dequeue = rnet->rxbuff->dequeue;
+ enqueue = rnet->rxbuff->enqueue;
+
+ while (enqueue != dequeue) {
+ size = rnet->rxbuff->size[dequeue];
+ if (!(size & RIONET_SKDATA_EN))
+ return;
+ size &= ~RIONET_SKDATA_EN;
+
+ if (!(skb = dev_alloc_skb(size + 2)))
+ return;
+
+#ifdef CONFIG_RIONET_DMA
+ dmadev = rnet->rxdmachan->device;
+ tx = dmadev->device_prep_dma_memcpy(rnet->rxdmachan, size, 0);
+ if (!tx)
+ return;
+ tx->ack = 1;
+ tx->tx_set_dest(dma_map_single(&ndev->dev, skb_put(skb, size),
+ size, DMA_FROM_DEVICE), tx, 0);
+ tx->tx_set_src((void *)rnet->rxbuff->skdata[dequeue].data
+ - (void *)rnet->rxbuff
+ + rnet->rxmem->iores.start, tx, 0);
+ rx_cookie = tx->tx_submit(tx);
+ dma_async_memcpy_issue_pending(rnet->rxdmachan);
+ while (dma_async_memcpy_complete(rnet->rxdmachan,
+ rx_cookie, NULL, NULL) == DMA_IN_PROGRESS) ;
+#else
+ memcpy(skb_put(skb, size),
+ rnet->rxbuff->skdata[dequeue].data,
+ size);
+#endif /* CONFIG_RIONET_DMA */
+ skb->dev = ndev;
+ skb->protocol = eth_type_trans(skb, ndev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ error = netif_rx(skb);
+
+ rnet->rxbuff->size[dequeue] &= ~RIONET_SKDATA_EN;
+ rnet->rxbuff->dequeue = RIONET_QUEUE_NEXT(dequeue);
+ dequeue = RIONET_QUEUE_NEXT(dequeue);
+
+ if (error == NET_RX_DROP) {
+ ndev->stats.rx_dropped++;
+ } else if (error == NET_RX_BAD) {
+ if (netif_msg_rx_err(rnet))
+ printk(KERN_WARNING "%s: bad rx packet\n",
+ DRV_NAME);
+ ndev->stats.rx_errors++;
+ } else {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += RIO_MAX_MSG_SIZE;
+ }
+ }
+}
+
+static void rionet_inb_recv_event(struct rio_mport *mport, void *dev_id)
+{
+ struct net_device *ndev = dev_id;
+ struct rionet_private *rnet = (struct rionet_private *)ndev->priv;
+ unsigned long flags;
+
+ if (netif_msg_intr(rnet))
+ printk(KERN_INFO "%s: inbound memory data receive event\n",
+ DRV_NAME);
+
+ spin_lock_irqsave(&rnet->lock, flags);
+ rio_recv_mem(ndev);
+ spin_unlock_irqrestore(&rnet->lock, flags);
+}
+#endif
+
+
static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid,
u16 info)
{
@@ -232,6 +465,10 @@ static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u
}
} else if (info == RIONET_DOORBELL_LEAVE) {
rionet_active[sid] = NULL;
+#ifdef CONFIG_RIONET_MEMMAP
+ } else if (info == RIONET_DOORBELL_SEND) {
+ rionet_inb_recv_event(mport, ndev);
+#endif
} else {
if (netif_msg_intr(rnet))
printk(KERN_WARNING "%s: unhandled doorbell\n",
@@ -239,6 +476,7 @@ static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u
}
}
+#ifndef CONFIG_RIONET_MEMMAP
static void rionet_inb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot)
{
int n;
@@ -281,6 +519,58 @@ static void rionet_outb_msg_event(struct rio_mport *mport, void *dev_id, int mbo
spin_unlock(&rnet->lock);
}
+#endif
+
+#ifdef CONFIG_RIONET_DMA
+static enum dma_state_client rionet_dma_event(struct dma_client *client,
+ struct dma_chan *chan, enum dma_state state)
+{
+ struct rionet_private *rnet = container_of(client,
+ struct rionet_private, rio_dma_client);
+ enum dma_state_client ack = DMA_DUP;
+
+ spin_lock(&rnet->lock);
+ switch (state) {
+ case DMA_RESOURCE_AVAILABLE:
+ if (!rnet->txdmachan) {
+ ack = DMA_ACK;
+ rnet->txdmachan = chan;
+ } else if (!rnet->rxdmachan) {
+ ack = DMA_ACK;
+ rnet->rxdmachan = chan;
+ }
+ break;
+ case DMA_RESOURCE_REMOVED:
+ if (rnet->txdmachan == chan) {
+ ack = DMA_ACK;
+ rnet->txdmachan = NULL;
+ } else if (rnet->rxdmachan == chan) {
+ ack = DMA_ACK;
+ rnet->rxdmachan = NULL;
+ }
+ break;
+ default:
+ break;
+ }
+ spin_unlock(&rnet->lock);
+ return ack;
+}
+
+static int rionet_dma_register(struct rionet_private *rnet)
+{
+ int rc = 0;
+ spin_lock_init(&rnet->rio_dma_event_lock);
+ rnet->rio_dma_client.event_callback = rionet_dma_event;
+ dma_cap_set(DMA_MEMCPY, rnet->rio_dma_client.cap_mask);
+ dma_async_client_register(&rnet->rio_dma_client);
+ dma_async_client_chan_request(&rnet->rio_dma_client);
+
+ if (!rnet->txdmachan || !rnet->rxdmachan)
+ rc = -ENODEV;
+
+ return rc;
+}
+#endif
static int rionet_open(struct net_device *ndev)
{
@@ -299,6 +589,26 @@ static int rionet_open(struct net_device *ndev)
rionet_dbell_event)) < 0)
goto out;
+#ifdef CONFIG_RIONET_MEMMAP
+ if (!(rnet->rxmem = rio_request_inb_region(rnet->mport, NULL,
+ RIONET_TX_RX_BUFF_SIZE, "rionet_rx_buff", RIONET_DRVID))) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ rnet->rxbuff = rnet->rxmem->virt;
+
+ if (!(rnet->txmem = rio_prepare_io_mem(rnet->mport, NULL,
+ RIONET_TX_RX_BUFF_SIZE, "rionet_tx_buff"))) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ rnet->txbuff = rnet->txmem->virt;
+#ifdef CONFIG_RIONET_DMA
+ rc = rionet_dma_register(rnet);
+ if (rc)
+ goto out;
+#endif /* CONFIG_RIONET_DMA */
+#else
if ((rc = rio_request_inb_mbox(rnet->mport,
(void *)ndev,
RIONET_MAILBOX,
@@ -312,6 +622,7 @@ static int rionet_open(struct net_device *ndev)
RIONET_TX_RING_SIZE,
rionet_outb_msg_event)) < 0)
goto out;
+#endif
/* Initialize inbound message ring */
for (i = 0; i < RIONET_RX_RING_SIZE; i++)
@@ -375,8 +686,18 @@ static int rionet_close(struct net_device *ndev)
rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN,
RIONET_DOORBELL_LEAVE);
+#ifdef CONFIG_RIONET_MEMMAP
+ rio_release_inb_region(rnet->mport, rnet->rxmem);
+ rio_release_outb_region(rnet->mport, rnet->txmem);
+ rnet->rxbuff = NULL;
+ rnet->txbuff = NULL;
+#ifdef CONFIG_RIONET_DMA
+ dma_async_client_unregister(&rnet->rio_dma_client);
+#endif
+#else
rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX);
rio_release_outb_mbox(rnet->mport, RIONET_MAILBOX);
+#endif
return 0;
}
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
* RE: [PATCH 11/17] Add memory mapping driver to RapidIO.
2008-03-04 10:37 ` Stephen Rothwell
@ 2008-03-05 1:59 ` Zhang Wei
2008-03-05 2:51 ` Stephen Rothwell
0 siblings, 1 reply; 24+ messages in thread
From: Zhang Wei @ 2008-03-05 1:59 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: mporter, galak, linuxppc-dev, linux-kernel
Hi, Stephen,
Thanks! I'm considering to commit a updated patch or new code cleaning
patch.
How about your idea?
Cheers!
Wei
> -----Original Message-----
> From: Stephen Rothwell [mailto:sfr@canb.auug.org.au]
> Sent: Tuesday, March 04, 2008 6:38 PM
> To: Zhang Wei
> Cc: mporter@kernel.crashing.org; galak@kernel.crashing.org;
> linuxppc-dev@ozlabs.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 11/17] Add memory mapping driver to RapidIO.
>
> On Wed, 5 Mar 2008 00:29:56 +0800 Zhang Wei
> <wei.zhang@freescale.com> wrote:
> >
> > + if (!(rmem->virt = dma_alloc_coherent(NULL, rmem->size,
> > + &rmem->iores.start, GFP_KERNEL))) {
>
> Please separate assignments from tests.
>
> > + if ((ret = rio_space_claim(rmem))) {
>
> Again.
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH 11/17] Add memory mapping driver to RapidIO.
2008-03-05 1:59 ` Zhang Wei
@ 2008-03-05 2:51 ` Stephen Rothwell
2008-03-11 8:53 ` Zhang Wei
0 siblings, 1 reply; 24+ messages in thread
From: Stephen Rothwell @ 2008-03-05 2:51 UTC (permalink / raw)
To: Zhang Wei; +Cc: linuxppc-dev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 462 bytes --]
Hi Weu,
On Wed, 5 Mar 2008 09:59:38 +0800 "Zhang Wei" <Wei.Zhang@freescale.com> wrote:
>
> Thanks! I'm considering to commit a updated patch or new code cleaning
> patch.
> How about your idea?
Preferably, fix up the patches. If that is a pain, then a followup patch
that cleans up is ok as these do not affect the correctness of the code.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* RE: [PATCH 11/17] Add memory mapping driver to RapidIO.
2008-03-05 2:51 ` Stephen Rothwell
@ 2008-03-11 8:53 ` Zhang Wei
0 siblings, 0 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-11 8:53 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linuxppc-dev, linux-kernel
Hi, Stephen,
I've updated those patches with fixing up.
Thanks!
Wei.
> -----Original Message-----
> From: Stephen Rothwell [mailto:sfr@canb.auug.org.au]
> Sent: Wednesday, March 05, 2008 10:52 AM
> To: Zhang Wei
> Cc: linuxppc-dev@ozlabs.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 11/17] Add memory mapping driver to RapidIO.
>
> Hi Weu,
>
> On Wed, 5 Mar 2008 09:59:38 +0800 "Zhang Wei"
> <Wei.Zhang@freescale.com> wrote:
> >
> > Thanks! I'm considering to commit a updated patch or new
> code cleaning
> > patch.
> > How about your idea?
>
> Preferably, fix up the patches. If that is a pain, then a
> followup patch
> that cleans up is ok as these do not affect the correctness
> of the code.
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH 01/17] Change RIO function mpc85xx_ to fsl_ .
@ 2008-03-11 9:07 Zhang Wei
0 siblings, 0 replies; 24+ messages in thread
From: Zhang Wei @ 2008-03-11 9:07 UTC (permalink / raw)
To: mporter, akpm, galak; +Cc: linux-kernel, linuxppc-dev, Zhang Wei
The driver is also fit for Freescale MPC8641 processor.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 80 ++++++++++++++++++++--------------------
1 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index af2425e..659a560 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,5 +1,5 @@
/*
- * MPC85xx RapidIO support
+ * Freescale MPC85xx/MPC86xx RapidIO support
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
@@ -145,7 +145,7 @@ static struct rio_msg_rx_ring {
} msg_rx_ring;
/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
@@ -153,9 +153,9 @@ static struct rio_msg_rx_ring {
* Sends a MPC85xx doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+static int fsl_rio_doorbell_send(int index, u16 destid, u16 data)
{
- pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
out_be16((void *)(dbell_win), data);
@@ -164,7 +164,7 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
}
/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * fsl_local_config_read - Generate a MPC85xx local config space read
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -173,9 +173,9 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
* Generates a MPC85xx local configuration space read. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+static int fsl_local_config_read(int index, u32 offset, int len, u32 *data)
{
- pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+ pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
offset);
*data = in_be32((void *)(regs_win + offset));
@@ -183,7 +183,7 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
}
/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * fsl_local_config_write - Generate a MPC85xx local config space write
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -192,10 +192,10 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
* Generates a MPC85xx local configuration space write. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+static int fsl_local_config_write(int index, u32 offset, int len, u32 data)
{
pr_debug
- ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
index, offset, data);
out_be32((void *)(regs_win + offset), data);
@@ -203,7 +203,7 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
}
/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -215,13 +215,13 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+fsl_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
u32 * val)
{
u8 *data;
pr_debug
- ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
out_be32((void *)&maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
@@ -243,7 +243,7 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
}
/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -255,12 +255,12 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+fsl_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
int len, u32 val)
{
u8 *data;
pr_debug
- ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
out_be32((void *)&maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
@@ -344,7 +344,7 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -352,7 +352,7 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+fsl_rio_tx_handler(int irq, void *dev_instance)
{
int osr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -452,7 +452,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
/* Hook up outbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_TX, fsl_rio_tx_handler, 0,
"msg_tx", (void *)mport)) < 0)
goto out_irq;
@@ -511,7 +511,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
}
/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -519,7 +519,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+fsl_rio_rx_handler(int irq, void *dev_instance)
{
int isr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -597,7 +597,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
/* Hook up inbound message handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_RX, fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport)) < 0) {
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
msg_tx_ring.virt_buffer[i],
@@ -729,7 +729,7 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -737,7 +737,7 @@ EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
* doorbell event handlers and executes a matching event handler.
*/
static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
@@ -794,14 +794,14 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
}
/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
* @mport: Master port implementing the inbound doorbell unit
*
* Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
* or %-ENOMEM on failure.
*/
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+static int fsl_rio_doorbell_init(struct rio_mport *mport)
{
int rc = 0;
@@ -835,7 +835,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
/* Hook up doorbell handler */
if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+ request_irq(MPC85xx_IRQ_RIO_BELL, fsl_rio_dbell_handler, 0,
"dbell_rx", (void *)mport) < 0)) {
iounmap((void *)dbell_win);
dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
@@ -854,7 +854,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
static char *cmdline = NULL;
-static int mpc85xx_rio_get_hdid(int index)
+static int fsl_rio_get_hdid(int index)
{
/* XXX Need to parse multiple entries in some format */
if (!cmdline)
@@ -863,7 +863,7 @@ static int mpc85xx_rio_get_hdid(int index)
return simple_strtol(cmdline, NULL, 0);
}
-static int mpc85xx_rio_get_cmdline(char *s)
+static int fsl_rio_get_cmdline(char *s)
{
if (!s)
return 0;
@@ -872,10 +872,10 @@ static int mpc85xx_rio_get_cmdline(char *s)
return 1;
}
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
+__setup("riohdid=", fsl_rio_get_cmdline);
/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * fsl_rio_setup - Setup MPC85xx RapidIO interface
* @law_start: Starting physical address of RapidIO LAW
* @law_size: Size of RapidIO LAW
*
@@ -883,17 +883,17 @@ __setup("riohdid=", mpc85xx_rio_get_cmdline);
* master port with system-specific info, and registers the
* master port with the RapidIO subsystem.
*/
-void mpc85xx_rio_setup(int law_start, int law_size)
+void fsl_rio_setup(int law_start, int law_size)
{
struct rio_ops *ops;
struct rio_mport *port;
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
- ops->lcread = mpc85xx_local_config_read;
- ops->lcwrite = mpc85xx_local_config_write;
- ops->cread = mpc85xx_rio_config_read;
- ops->cwrite = mpc85xx_rio_config_write;
- ops->dsend = mpc85xx_rio_doorbell_send;
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
@@ -909,7 +909,7 @@ void mpc85xx_rio_setup(int law_start, int law_size)
strcpy(port->name, "RIO0 mport");
port->ops = ops;
- port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+ port->host_deviceid = fsl_rio_get_hdid(port->id);
rio_register_mport(port);
@@ -928,5 +928,5 @@ void mpc85xx_rio_setup(int law_start, int law_size)
/* Configure outbound doorbell window */
out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
- mpc85xx_rio_doorbell_init(port);
+ fsl_rio_doorbell_init(port);
}
--
1.5.4
^ permalink raw reply related [flat|nested] 24+ messages in thread
end of thread, other threads:[~2008-03-11 9:11 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-04 16:29 [PATCH 01/17] Change RIO function mpc85xx_ to fsl_ Zhang Wei
2008-03-04 16:29 ` [PATCH 02/17] Add RapidIO option to kernel configuration Zhang Wei
2008-03-04 16:29 ` [PATCH 03/17] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h Zhang Wei
2008-03-04 16:29 ` [PATCH 04/17] Add RapidIO multi mport support Zhang Wei
2008-03-04 16:29 ` [PATCH 05/17] Add OF-tree support to RapidIO controller driver Zhang Wei
2008-03-04 10:12 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 06/17] Change the kernel configurated RapidIO system size to auto-probing Zhang Wei
2008-03-04 10:20 ` Stephen Rothwell
2008-03-04 16:29 ` [PATCH 07/17] Add RapidIO node into MPC8641HPCN dts file Zhang Wei
2008-03-04 16:29 ` [PATCH 08/17] Add RapidIO node probing into MPC86xx_HPCN board id table Zhang Wei
2008-03-04 16:29 ` [PATCH 09/17] Add serial RapidIO controller support, which includes MPC8548, MPC8641 Zhang Wei
2008-03-04 16:29 ` [PATCH 10/17] Add RapidIO connection info print out and re-training for break connection Zhang Wei
2008-03-04 16:29 ` [PATCH 11/17] Add memory mapping driver to RapidIO Zhang Wei
2008-03-04 10:37 ` Stephen Rothwell
2008-03-05 1:59 ` Zhang Wei
2008-03-05 2:51 ` Stephen Rothwell
2008-03-11 8:53 ` Zhang Wei
2008-03-04 16:29 ` [PATCH 12/17] Add RapidIO space allocation bitmap arithmetic Zhang Wei
2008-03-04 16:29 ` [PATCH 13/17] Add FSL RapidIO controller memory ops functions Zhang Wei
2008-03-04 16:29 ` [PATCH 14/17] Add the RapidIO master port maintance and doorbell window to space resources Zhang Wei
2008-03-04 16:30 ` [PATCH 15/17] Add RapidIO proc fs for memory mapping debugging Zhang Wei
2008-03-04 16:30 ` [PATCH 16/17] Change RapidIO doorbell source and target ID field to 16-bit Zhang Wei
2008-03-04 16:30 ` [PATCH 17/17] Add the memory mapping support in rionet driver Zhang Wei
2008-03-11 9:07 [PATCH 01/17] Change RIO function mpc85xx_ to fsl_ Zhang Wei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).