From: Alexey Charkov <alchark@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: vt8500-wm8505-linux-kernel@googlegroups.com,
Alexey Charkov <alchark@gmail.com>,
Greg Kroah-Hartman <gregkh@suse.de>,
David Brownell <dbrownell@users.sourceforge.net>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/6 v2] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
Date: Sun, 7 Nov 2010 19:28:55 +0300 [thread overview]
Message-ID: <1289147348-31969-4-git-send-email-alchark@gmail.com> (raw)
In-Reply-To: <1289147348-31969-1-git-send-email-alchark@gmail.com>
VIA and WonderMedia Systems-on-Chip feature a standard EHCI host
controller. This adds necessary glue to use the standard driver
with these systems.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
Please review and (if appropriate) commit to a relevant git tree for
further integration in 2.6.38.
Compared to the previous submission, this code just contains a rebase
against the latest changes introduced in 2.6.37 merge window.
Relevant platform definitions are introduced by PATCH 1/6 in this series,
so one would need that to make use of this code.
Due credits go to the community for providing feedback, advice and
testing.
drivers/usb/Kconfig | 1 +
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-vt8500.c | 172 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 178 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/ehci-vt8500.c
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 67eb377..7d13506 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_AT91SAM9G45
default y if ARCH_MXC
default y if ARCH_OMAP3
+ default y if ARCH_VT8500
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6..10f985d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1216,6 +1216,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
+#ifdef CONFIG_ARCH_VT8500
+#include "ehci-vt8500.c"
+#define PLATFORM_DRIVER vt8500_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
new file mode 100644
index 0000000..2016806
--- /dev/null
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -0,0 +1,172 @@
+/*
+ * drivers/usb/host/ehci-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on ehci-au1xxx.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int rc = 0;
+
+ if (!udev->parent) /* udev is root hub itself, impossible */
+ rc = -1;
+ /* we only support lpm device connected to root hub yet */
+ if (ehci->has_lpm && !udev->parent->parent) {
+ rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+ if (!rc)
+ rc = ehci_lpm_check(ehci, udev->portnum);
+ }
+ return rc;
+}
+
+static const struct hc_driver vt8500_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "VT8500 EHCI",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = ehci_update_device,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int vt8500_ehci_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource *res;
+ int ret;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug("resource[1] is not IORESOURCE_IRQ");
+ return -ENOMEM;
+ }
+ hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
+ if (!hcd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed");
+ ret = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ ehci_port_power(ehci, 1);
+
+ ret = usb_add_hcd(hcd, pdev->resource[1].start,
+ IRQF_DISABLED | IRQF_SHARED);
+ if (ret == 0) {
+ platform_set_drvdata(pdev, hcd);
+ return ret;
+ }
+
+ iounmap(hcd->regs);
+err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int vt8500_ehci_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver vt8500_ehci_driver = {
+ .probe = vt8500_ehci_drv_probe,
+ .remove = vt8500_ehci_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "vt8500-ehci",
+ .owner = THIS_MODULE,
+ }
+};
+
+MODULE_ALIAS("platform:vt8500-ehci");
--
1.7.3.2
next prev parent reply other threads:[~2010-11-07 16:31 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-07 16:28 [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's Alexey Charkov
2010-11-07 16:28 ` [PATCH 2/6 v2] serial: Add support for UART on VIA VT8500 and compatibles Alexey Charkov
2010-11-07 23:08 ` Alan Cox
2010-11-08 0:58 ` [PATCH 2/6 v3] " Alexey Charkov
2010-11-08 10:46 ` Alan Cox
2010-11-08 17:33 ` [PATCH 2/6 v4] " Alexey Charkov
2010-11-07 16:28 ` [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042 Alexey Charkov
2010-11-12 22:54 ` Alexey Charkov
2010-11-12 23:30 ` Dmitry Torokhov
2010-11-13 0:00 ` Alexey Charkov
2010-12-22 21:41 ` [PATCH 3/6 v3] " Alexey Charkov
2010-11-07 16:28 ` Alexey Charkov [this message]
2010-11-07 16:28 ` [PATCH 5/6 v2] rtc: Add support for the RTC in VIA VT8500 and compatibles Alexey Charkov
2010-11-12 22:53 ` Alexey Charkov
2010-11-13 12:14 ` Lars-Peter Clausen
2010-11-13 23:56 ` [PATCH 5/6 v3] " Alexey Charkov
2010-11-14 15:50 ` Lars-Peter Clausen
2010-11-14 17:00 ` [PATCH 5/6 v4] " Alexey Charkov
2010-11-23 19:17 ` Alexey Charkov
2010-11-24 19:23 ` Lars-Peter Clausen
2010-11-24 22:47 ` [PATCH 5/6 v5] " Alexey Charkov
2010-11-07 16:28 ` [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505 Alexey Charkov
2010-11-08 4:17 ` Paul Mundt
2010-11-08 12:56 ` Alexey Charkov
2010-11-08 14:14 ` [PATCH 6/6 v3] " Alexey Charkov
2010-11-08 20:43 ` Paul Mundt
2010-11-08 21:15 ` Alexey Charkov
2010-11-08 21:30 ` Paul Mundt
2010-11-08 23:42 ` [PATCH 6/6 v4] " Alexey Charkov
2010-11-08 23:54 ` Paul Mundt
2010-11-09 0:03 ` Alexey Charkov
2010-11-09 7:36 ` Guennadi Liakhovetski
2010-11-09 9:39 ` Paul Mundt
2010-11-09 9:49 ` Alexey Charkov
2010-11-09 10:33 ` [PATCH 6/6 v3] " Russell King - ARM Linux
2010-11-09 10:51 ` Paul Mundt
2010-11-09 11:04 ` Russell King - ARM Linux
2010-11-09 13:02 ` Geert Uytterhoeven
2010-11-09 13:33 ` Arnd Bergmann
2010-11-09 16:20 ` Paul Mundt
2010-11-08 8:47 ` [PATCH 6/6 v2] " Arnd Bergmann
2010-11-09 10:23 ` Alexey Charkov
2010-11-09 15:03 ` Arnd Bergmann
2010-11-07 16:57 ` [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's Russell King - ARM Linux
2010-11-07 17:08 ` Alexey Charkov
2010-11-07 17:17 ` Russell King - ARM Linux
2010-11-07 18:25 ` [PATCH 1/6 v3] " Alexey Charkov
2010-11-08 17:19 ` [PATCH 1/6 v4] " Alexey Charkov
2010-11-10 15:16 ` saeed bishara
2010-11-10 15:18 ` Russell King - ARM Linux
2010-11-10 15:20 ` saeed bishara
2010-11-11 21:23 ` [PATCH 1/6 v5] " Alexey Charkov
2010-11-11 23:49 ` Russell King - ARM Linux
2010-11-12 16:54 ` [PATCH 1/6 v6] " Alexey Charkov
2010-11-12 20:14 ` Alexey Charkov
2010-11-23 19:50 ` [PATCH 1/6 v7] " Alexey Charkov
2010-12-19 17:40 ` [PATCH 1/6 v8] " Alexey Charkov
2010-12-20 18:15 ` Arnd Bergmann
2010-12-20 19:15 ` Russell King - ARM Linux
2010-12-20 19:26 ` Alexey Charkov
2010-12-20 19:54 ` [PATCH 1/6 v9] " Alexey Charkov
2010-12-20 20:50 ` Ryan Mallon
2010-12-20 21:48 ` Alexey Charkov
2010-12-20 22:23 ` Ryan Mallon
2010-12-20 23:00 ` Alexey Charkov
2010-12-20 23:22 ` Ryan Mallon
2010-12-20 23:49 ` Alexey Charkov
2010-12-21 0:09 ` Alexey Charkov
2010-12-21 2:32 ` Ryan Mallon
2010-12-21 10:00 ` Alexey Charkov
2010-12-21 12:05 ` Arnd Bergmann
2010-12-21 19:39 ` Ryan Mallon
2010-12-22 21:18 ` [PATCH 1/6 v10] " Alexey Charkov
2010-12-22 21:52 ` Ryan Mallon
2010-12-22 22:02 ` Alexey Charkov
2010-12-22 22:32 ` Ryan Mallon
2010-12-22 22:25 ` [PATCH 1/6 v11] " Alexey Charkov
2010-12-22 22:59 ` Ryan Mallon
2010-12-22 23:38 ` [PATCH 1/6 v12] " Alexey Charkov
2010-12-28 14:52 ` Alexey Charkov
2011-01-15 0:53 ` Alexey Charkov
2011-01-15 0:58 ` Russell King - ARM Linux
2011-01-15 1:13 ` Alexey Charkov
2011-01-21 10:43 ` Russell King - ARM Linux
2011-07-06 12:34 ` [PATCH 1/6 v8] " Russell King - ARM Linux
2011-07-07 7:13 ` Alexey Charkov
2011-07-07 7:54 ` Arnd Bergmann
2011-07-07 7:59 ` Russell King - ARM Linux
2011-07-07 8:05 ` Arnd Bergmann
2010-11-07 17:00 ` [PATCH 1/6 v2] " Russell King - ARM Linux
2010-11-07 17:16 ` Alexey Charkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289147348-31969-4-git-send-email-alchark@gmail.com \
--to=alchark@gmail.com \
--cc=dbrownell@users.sourceforge.net \
--cc=gregkh@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=vt8500-wm8505-linux-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).