* [PATCH 1/7] [media] move ati_remote driver from input/misc to media/rc
2011-08-06 22:18 ` [PATCH 0/7] ati_remote: move to rc-core and other updates Anssi Hannula
@ 2011-08-06 22:18 ` Anssi Hannula
2011-08-06 22:18 ` [PATCH 2/7] [media] ati_remote: migrate to the rc subsystem Anssi Hannula
` (5 subsequent siblings)
6 siblings, 0 replies; 18+ messages in thread
From: Anssi Hannula @ 2011-08-06 22:18 UTC (permalink / raw)
To: dmitry.torokhov; +Cc: linux-media, linux-input, linux-kernel
The driver will be migrated to the RC driver API in a following
commit.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
---
drivers/input/misc/Kconfig | 16 -
drivers/input/misc/Makefile | 1 -
drivers/input/misc/ati_remote.c | 867 ---------------------------------------
drivers/media/rc/Kconfig | 20 +-
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ati_remote.c | 867 +++++++++++++++++++++++++++++++++++++++
6 files changed, 886 insertions(+), 886 deletions(-)
delete mode 100644 drivers/input/misc/ati_remote.c
create mode 100644 drivers/media/rc/ati_remote.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f9cf088..2a33413 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -162,22 +162,6 @@ config INPUT_ATLAS_BTNS
To compile this driver as a module, choose M here: the module will
be called atlas_btns.
-config INPUT_ATI_REMOTE
- tristate "ATI / X10 USB RF remote control"
- depends on USB_ARCH_HAS_HCD
- select USB
- help
- Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
- These are RF remotes with USB receivers.
- The ATI remote comes with many of ATI's All-In-Wonder video cards.
- The X10 "Lola" remote is available at:
- <http://www.x10.com/products/lola_sg1.htm>
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
-
- To compile this driver as a module, choose M here: the module will be
- called ati_remote.
-
config INPUT_ATI_REMOTE2
tristate "ATI / Philips USB RF remote control"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index e3f7984..b11c25a 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o
obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o
obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
-obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
deleted file mode 100644
index bce5712..0000000
--- a/drivers/input/misc/ati_remote.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * USB ATI Remote support
- *
- * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
- * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
- *
- * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
- * porting to the 2.6 kernel interfaces, along with other modification
- * to better match the style of the existing usb/input drivers. However, the
- * protocol and hardware handling is essentially unchanged from 2.1.1.
- *
- * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
- * Vojtech Pavlik.
- *
- * Changes:
- *
- * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
- * Version 2.2.0
- * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
- * Version 2.2.1
- * Added key repeat support contributed by:
- * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
- * Added support for the "Lola" remote contributed by:
- * Seth Cohn <sethcohn@yahoo.com>
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
- *
- * Hardware & software notes
- *
- * These remote controls are distributed by ATI as part of their
- * "All-In-Wonder" video card packages. The receiver self-identifies as a
- * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
- *
- * The "Lola" remote is available from X10. See:
- * http://www.x10.com/products/lola_sg1.htm
- * The Lola is similar to the ATI remote but has no mouse support, and slightly
- * different keys.
- *
- * It is possible to use multiple receivers and remotes on multiple computers
- * simultaneously by configuring them to use specific channels.
- *
- * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
- * Actually, it may even support more, at least in some revisions of the
- * hardware.
- *
- * Each remote can be configured to transmit on one channel as follows:
- * - Press and hold the "hand icon" button.
- * - When the red LED starts to blink, let go of the "hand icon" button.
- * - When it stops blinking, input the channel code as two digits, from 01
- * to 16, and press the hand icon again.
- *
- * The timing can be a little tricky. Try loading the module with debug=1
- * to have the kernel print out messages about the remote control number
- * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
- *
- * The driver has a "channel_mask" parameter. This bitmask specifies which
- * channels will be ignored by the module. To mask out channels, just add
- * all the 2^channel_number values together.
- *
- * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
- * ignore signals coming from remote controls transmitting on channel 4, but
- * accept all other channels.
- *
- * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
- * ignored.
- *
- * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
- * parameter are unused.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb/input.h>
-#include <linux/wait.h>
-#include <linux/jiffies.h>
-
-/*
- * Module and Version Information, Module Parameters
- */
-
-#define ATI_REMOTE_VENDOR_ID 0x0bc7
-#define LOLA_REMOTE_PRODUCT_ID 0x0002
-#define LOLA2_REMOTE_PRODUCT_ID 0x0003
-#define ATI_REMOTE_PRODUCT_ID 0x0004
-#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
-#define MEDION_REMOTE_PRODUCT_ID 0x0006
-
-#define DRIVER_VERSION "2.2.1"
-#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
-#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
-
-#define NAME_BUFSIZE 80 /* size of product name, path buffers */
-#define DATA_BUFSIZE 63 /* size of URB data buffers */
-
-/*
- * Duplicate event filtering time.
- * Sequential, identical KIND_FILTERED inputs with less than
- * FILTER_TIME milliseconds between them are considered as repeat
- * events. The hardware generates 5 events for the first keypress
- * and we have to take this into account for an accurate repeat
- * behaviour.
- */
-#define FILTER_TIME 60 /* msec */
-#define REPEAT_DELAY 500 /* msec */
-
-static unsigned long channel_mask;
-module_param(channel_mask, ulong, 0644);
-MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
-
-static int repeat_filter = FILTER_TIME;
-module_param(repeat_filter, int, 0644);
-MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
-
-static int repeat_delay = REPEAT_DELAY;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
-
-#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
-#undef err
-#define err(format, arg...) printk(KERN_ERR format , ## arg)
-
-static struct usb_device_id ati_remote_table[] = {
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ati_remote_table);
-
-/* Get hi and low bytes of a 16-bits int */
-#define HI(a) ((unsigned char)((a) >> 8))
-#define LO(a) ((unsigned char)((a) & 0xff))
-
-#define SEND_FLAG_IN_PROGRESS 1
-#define SEND_FLAG_COMPLETE 2
-
-/* Device initialization strings */
-static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
-static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
-
-struct ati_remote {
- struct input_dev *idev;
- struct usb_device *udev;
- struct usb_interface *interface;
-
- struct urb *irq_urb;
- struct urb *out_urb;
- struct usb_endpoint_descriptor *endpoint_in;
- struct usb_endpoint_descriptor *endpoint_out;
- unsigned char *inbuf;
- unsigned char *outbuf;
- dma_addr_t inbuf_dma;
- dma_addr_t outbuf_dma;
-
- unsigned char old_data[2]; /* Detect duplicate events */
- unsigned long old_jiffies;
- unsigned long acc_jiffies; /* handle acceleration */
- unsigned long first_jiffies;
-
- unsigned int repeat_count;
-
- char name[NAME_BUFSIZE];
- char phys[NAME_BUFSIZE];
-
- wait_queue_head_t wait;
- int send_flags;
-};
-
-/* "Kinds" of messages sent from the hardware to the driver. */
-#define KIND_END 0
-#define KIND_LITERAL 1 /* Simply pass to input system */
-#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
-#define KIND_LU 3 /* Directional keypad diagonals - left up, */
-#define KIND_RU 4 /* right up, */
-#define KIND_LD 5 /* left down, */
-#define KIND_RD 6 /* right down */
-#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
-
-/* Translation table from hardware messages to input events. */
-static const struct {
- short kind;
- unsigned char data1, data2;
- int type;
- unsigned int code;
- int value;
-} ati_remote_tbl[] = {
- /* Directional control pad axes */
- {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
- {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
- {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
- {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
- /* Directional control pad diagonals */
- {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
- {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
- {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
- {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
-
- /* "Mouse button" buttons */
- {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
- {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
- {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
- {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
-
- /* Artificial "doubleclick" events are generated by the hardware.
- * They are mapped to the "side" and "extra" mouse buttons here. */
- {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
- {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
-
- /* keyboard. */
- {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
- {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
- {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
- {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
- {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
- {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
- {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
- {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
- {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
- {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
- {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
- {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
- {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
- {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
- {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
- {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
-
- /* "special" keys */
- {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
- {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
- {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
- {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
- {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
- {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
- {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
- {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
- {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
- {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
- {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
- {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
- {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
- {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
- {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
- {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
- {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
- {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
- {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
- {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
- {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
- {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
- {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
- {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
- {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
- {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
- {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
- {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
- {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
- {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
- {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
- {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
-
- {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
-};
-
-/* Local function prototypes */
-static int ati_remote_open (struct input_dev *inputdev);
-static void ati_remote_close (struct input_dev *inputdev);
-static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
-static void ati_remote_irq_out (struct urb *urb);
-static void ati_remote_irq_in (struct urb *urb);
-static void ati_remote_input_report (struct urb *urb);
-static int ati_remote_initialize (struct ati_remote *ati_remote);
-static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
-static void ati_remote_disconnect (struct usb_interface *interface);
-
-/* usb specific object to register with the usb subsystem */
-static struct usb_driver ati_remote_driver = {
- .name = "ati_remote",
- .probe = ati_remote_probe,
- .disconnect = ati_remote_disconnect,
- .id_table = ati_remote_table,
-};
-
-/*
- * ati_remote_dump_input
- */
-static void ati_remote_dump(struct device *dev, unsigned char *data,
- unsigned int len)
-{
- if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
- dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
- else if (len == 4)
- dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
- data[0], data[1], data[2], data[3]);
- else
- dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
- len, data[0], data[1], data[2], data[3], data[4], data[5]);
-}
-
-/*
- * ati_remote_open
- */
-static int ati_remote_open(struct input_dev *inputdev)
-{
- struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
- /* On first open, submit the read urb which was set up previously. */
- ati_remote->irq_urb->dev = ati_remote->udev;
- if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
- dev_err(&ati_remote->interface->dev,
- "%s: usb_submit_urb failed!\n", __func__);
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * ati_remote_close
- */
-static void ati_remote_close(struct input_dev *inputdev)
-{
- struct ati_remote *ati_remote = input_get_drvdata(inputdev);
-
- usb_kill_urb(ati_remote->irq_urb);
-}
-
-/*
- * ati_remote_irq_out
- */
-static void ati_remote_irq_out(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
-
- if (urb->status) {
- dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
- __func__, urb->status);
- return;
- }
-
- ati_remote->send_flags |= SEND_FLAG_COMPLETE;
- wmb();
- wake_up(&ati_remote->wait);
-}
-
-/*
- * ati_remote_sendpacket
- *
- * Used to send device initialization strings
- */
-static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
-{
- int retval = 0;
-
- /* Set up out_urb */
- memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
- ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
-
- ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
- ati_remote->out_urb->dev = ati_remote->udev;
- ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
-
- retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
- if (retval) {
- dev_dbg(&ati_remote->interface->dev,
- "sendpacket: usb_submit_urb failed: %d\n", retval);
- return retval;
- }
-
- wait_event_timeout(ati_remote->wait,
- ((ati_remote->out_urb->status != -EINPROGRESS) ||
- (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
- HZ);
- usb_kill_urb(ati_remote->out_urb);
-
- return retval;
-}
-
-/*
- * ati_remote_event_lookup
- */
-static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
-{
- int i;
-
- for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
- /*
- * Decide if the table entry matches the remote input.
- */
- if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
- ((((ati_remote_tbl[i].data1 >> 4) -
- (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
- (ati_remote_tbl[i].data2 == d2))
- return i;
-
- }
- return -1;
-}
-
-/*
- * ati_remote_compute_accel
- *
- * Implements acceleration curve for directional control pad
- * If elapsed time since last event is > 1/4 second, user "stopped",
- * so reset acceleration. Otherwise, user is probably holding the control
- * pad down, so we increase acceleration, ramping up over two seconds to
- * a maximum speed.
- */
-static int ati_remote_compute_accel(struct ati_remote *ati_remote)
-{
- static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
- unsigned long now = jiffies;
- int acc;
-
- if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
- acc = 1;
- ati_remote->acc_jiffies = now;
- }
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
- acc = accel[0];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
- acc = accel[1];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
- acc = accel[2];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
- acc = accel[3];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
- acc = accel[4];
- else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
- acc = accel[5];
- else
- acc = accel[6];
-
- return acc;
-}
-
-/*
- * ati_remote_report_input
- */
-static void ati_remote_input_report(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
- unsigned char *data= ati_remote->inbuf;
- struct input_dev *dev = ati_remote->idev;
- int index, acc;
- int remote_num;
-
- /* Deal with strange looking inputs */
- if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
- ((data[3] & 0x0f) != 0x00) ) {
- ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
- return;
- }
-
- /* Mask unwanted remote channels. */
- /* note: remote_num is 0-based, channel 1 on remote == 0 here */
- remote_num = (data[3] >> 4) & 0x0f;
- if (channel_mask & (1 << (remote_num + 1))) {
- dbginfo(&ati_remote->interface->dev,
- "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
- remote_num, data[1], data[2], channel_mask);
- return;
- }
-
- /* Look up event code index in translation table */
- index = ati_remote_event_lookup(remote_num, data[1], data[2]);
- if (index < 0) {
- dev_warn(&ati_remote->interface->dev,
- "Unknown input from channel 0x%02x: data %02x,%02x\n",
- remote_num, data[1], data[2]);
- return;
- }
- dbginfo(&ati_remote->interface->dev,
- "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
- remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
-
- if (ati_remote_tbl[index].kind == KIND_LITERAL) {
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code,
- ati_remote_tbl[index].value);
- input_sync(dev);
-
- ati_remote->old_jiffies = jiffies;
- return;
- }
-
- if (ati_remote_tbl[index].kind == KIND_FILTERED) {
- unsigned long now = jiffies;
-
- /* Filter duplicate events which happen "too close" together. */
- if (ati_remote->old_data[0] == data[1] &&
- ati_remote->old_data[1] == data[2] &&
- time_before(now, ati_remote->old_jiffies +
- msecs_to_jiffies(repeat_filter))) {
- ati_remote->repeat_count++;
- } else {
- ati_remote->repeat_count = 0;
- ati_remote->first_jiffies = now;
- }
-
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
- ati_remote->old_jiffies = now;
-
- /* Ensure we skip at least the 4 first duplicate events (generated
- * by a single keypress), and continue skipping until repeat_delay
- * msecs have passed
- */
- if (ati_remote->repeat_count > 0 &&
- (ati_remote->repeat_count < 5 ||
- time_before(now, ati_remote->first_jiffies +
- msecs_to_jiffies(repeat_delay))))
- return;
-
-
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code, 1);
- input_sync(dev);
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code, 0);
- input_sync(dev);
-
- } else {
-
- /*
- * Other event kinds are from the directional control pad, and have an
- * acceleration factor applied to them. Without this acceleration, the
- * control pad is mostly unusable.
- */
- acc = ati_remote_compute_accel(ati_remote);
-
- switch (ati_remote_tbl[index].kind) {
- case KIND_ACCEL:
- input_event(dev, ati_remote_tbl[index].type,
- ati_remote_tbl[index].code,
- ati_remote_tbl[index].value * acc);
- break;
- case KIND_LU:
- input_report_rel(dev, REL_X, -acc);
- input_report_rel(dev, REL_Y, -acc);
- break;
- case KIND_RU:
- input_report_rel(dev, REL_X, acc);
- input_report_rel(dev, REL_Y, -acc);
- break;
- case KIND_LD:
- input_report_rel(dev, REL_X, -acc);
- input_report_rel(dev, REL_Y, acc);
- break;
- case KIND_RD:
- input_report_rel(dev, REL_X, acc);
- input_report_rel(dev, REL_Y, acc);
- break;
- default:
- dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
- ati_remote_tbl[index].kind);
- }
- input_sync(dev);
-
- ati_remote->old_jiffies = jiffies;
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
- }
-}
-
-/*
- * ati_remote_irq_in
- */
-static void ati_remote_irq_in(struct urb *urb)
-{
- struct ati_remote *ati_remote = urb->context;
- int retval;
-
- switch (urb->status) {
- case 0: /* success */
- ati_remote_input_report(urb);
- break;
- case -ECONNRESET: /* unlink */
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
- __func__);
- return;
- default: /* error */
- dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
- __func__, urb->status);
- }
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
- __func__, retval);
-}
-
-/*
- * ati_remote_alloc_buffers
- */
-static int ati_remote_alloc_buffers(struct usb_device *udev,
- struct ati_remote *ati_remote)
-{
- ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
- &ati_remote->inbuf_dma);
- if (!ati_remote->inbuf)
- return -1;
-
- ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
- &ati_remote->outbuf_dma);
- if (!ati_remote->outbuf)
- return -1;
-
- ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->irq_urb)
- return -1;
-
- ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->out_urb)
- return -1;
-
- return 0;
-}
-
-/*
- * ati_remote_free_buffers
- */
-static void ati_remote_free_buffers(struct ati_remote *ati_remote)
-{
- usb_free_urb(ati_remote->irq_urb);
- usb_free_urb(ati_remote->out_urb);
-
- usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->inbuf, ati_remote->inbuf_dma);
-
- usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->outbuf, ati_remote->outbuf_dma);
-}
-
-static void ati_remote_input_init(struct ati_remote *ati_remote)
-{
- struct input_dev *idev = ati_remote->idev;
- int i;
-
- idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
- idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
- if (ati_remote_tbl[i].type == EV_KEY)
- set_bit(ati_remote_tbl[i].code, idev->keybit);
-
- input_set_drvdata(idev, ati_remote);
-
- idev->open = ati_remote_open;
- idev->close = ati_remote_close;
-
- idev->name = ati_remote->name;
- idev->phys = ati_remote->phys;
-
- usb_to_input_id(ati_remote->udev, &idev->id);
- idev->dev.parent = &ati_remote->udev->dev;
-}
-
-static int ati_remote_initialize(struct ati_remote *ati_remote)
-{
- struct usb_device *udev = ati_remote->udev;
- int pipe, maxp;
-
- init_waitqueue_head(&ati_remote->wait);
-
- /* Set up irq_urb */
- pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
- usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
- maxp, ati_remote_irq_in, ati_remote,
- ati_remote->endpoint_in->bInterval);
- ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
- ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /* Set up out_urb */
- pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-
- usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
- maxp, ati_remote_irq_out, ati_remote,
- ati_remote->endpoint_out->bInterval);
- ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
- ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /* send initialization strings */
- if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
- (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
- dev_err(&ati_remote->interface->dev,
- "Initializing ati_remote hardware failed.\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/*
- * ati_remote_probe
- */
-static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_host = interface->cur_altsetting;
- struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
- struct ati_remote *ati_remote;
- struct input_dev *input_dev;
- int err = -ENOMEM;
-
- if (iface_host->desc.bNumEndpoints != 2) {
- err("%s: Unexpected desc.bNumEndpoints\n", __func__);
- return -ENODEV;
- }
-
- endpoint_in = &iface_host->endpoint[0].desc;
- endpoint_out = &iface_host->endpoint[1].desc;
-
- if (!usb_endpoint_is_int_in(endpoint_in)) {
- err("%s: Unexpected endpoint_in\n", __func__);
- return -ENODEV;
- }
- if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
- err("%s: endpoint_in message size==0? \n", __func__);
- return -ENODEV;
- }
-
- ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ati_remote || !input_dev)
- goto fail1;
-
- /* Allocate URB buffers, URBs */
- if (ati_remote_alloc_buffers(udev, ati_remote))
- goto fail2;
-
- ati_remote->endpoint_in = endpoint_in;
- ati_remote->endpoint_out = endpoint_out;
- ati_remote->udev = udev;
- ati_remote->idev = input_dev;
- ati_remote->interface = interface;
-
- usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
- strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
-
- if (udev->manufacturer)
- strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
-
- if (udev->product)
- snprintf(ati_remote->name, sizeof(ati_remote->name),
- "%s %s", ati_remote->name, udev->product);
-
- if (!strlen(ati_remote->name))
- snprintf(ati_remote->name, sizeof(ati_remote->name),
- DRIVER_DESC "(%04x,%04x)",
- le16_to_cpu(ati_remote->udev->descriptor.idVendor),
- le16_to_cpu(ati_remote->udev->descriptor.idProduct));
-
- ati_remote_input_init(ati_remote);
-
- /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
- err = ati_remote_initialize(ati_remote);
- if (err)
- goto fail3;
-
- /* Set up and register input device */
- err = input_register_device(ati_remote->idev);
- if (err)
- goto fail3;
-
- usb_set_intfdata(interface, ati_remote);
- return 0;
-
- fail3: usb_kill_urb(ati_remote->irq_urb);
- usb_kill_urb(ati_remote->out_urb);
- fail2: ati_remote_free_buffers(ati_remote);
- fail1: input_free_device(input_dev);
- kfree(ati_remote);
- return err;
-}
-
-/*
- * ati_remote_disconnect
- */
-static void ati_remote_disconnect(struct usb_interface *interface)
-{
- struct ati_remote *ati_remote;
-
- ati_remote = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
- if (!ati_remote) {
- dev_warn(&interface->dev, "%s - null device?\n", __func__);
- return;
- }
-
- usb_kill_urb(ati_remote->irq_urb);
- usb_kill_urb(ati_remote->out_urb);
- input_unregister_device(ati_remote->idev);
- ati_remote_free_buffers(ati_remote);
- kfree(ati_remote);
-}
-
-/*
- * ati_remote_init
- */
-static int __init ati_remote_init(void)
-{
- int result;
-
- result = usb_register(&ati_remote_driver);
- if (result)
- printk(KERN_ERR KBUILD_MODNAME
- ": usb_register error #%d\n", result);
- else
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
-
- return result;
-}
-
-/*
- * ati_remote_exit
- */
-static void __exit ati_remote_exit(void)
-{
- usb_deregister(&ati_remote_driver);
-}
-
-/*
- * module specification
- */
-
-module_init(ati_remote_init);
-module_exit(ati_remote_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 7f03142..4a5b4a6 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -4,8 +4,8 @@ menuconfig RC_CORE
default INPUT
---help---
Enable support for Remote Controllers on Linux. This is
- needed in order to support several video capture adapters.
- Currently, all supported devices use InfraRed.
+ needed in order to support several video capture adapters,
+ standalone IR receivers/transmitters, and RF receivers.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
@@ -97,6 +97,22 @@ config IR_LIRC_CODEC
Enable this option to pass raw IR to and from userspace via
the LIRC interface.
+config RC_ATI_REMOTE
+ tristate "ATI / X10 USB RF remote control"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+ These are RF remotes with USB receivers.
+ The ATI remote comes with many of ATI's All-In-Wonder video cards.
+ The X10 "Lola" remote is available at:
+ <http://www.x10.com/products/lola_sg1.htm>
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
+
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index c6cfe70..d8727e3 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters
+obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
new file mode 100644
index 0000000..bce5712
--- /dev/null
+++ b/drivers/media/rc/ati_remote.c
@@ -0,0 +1,867 @@
+/*
+ * USB ATI Remote support
+ *
+ * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
+ *
+ * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
+ * porting to the 2.6 kernel interfaces, along with other modification
+ * to better match the style of the existing usb/input drivers. However, the
+ * protocol and hardware handling is essentially unchanged from 2.1.1.
+ *
+ * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
+ * Vojtech Pavlik.
+ *
+ * Changes:
+ *
+ * Feb 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.0
+ * Jun 2004: Torrey Hoffman <thoffman@arnor.net>
+ * Version 2.2.1
+ * Added key repeat support contributed by:
+ * Vincent Vanackere <vanackere@lif.univ-mrs.fr>
+ * Added support for the "Lola" remote contributed by:
+ * Seth Cohn <sethcohn@yahoo.com>
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
+ * Hardware & software notes
+ *
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages. The receiver self-identifies as a
+ * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
+ *
+ * The "Lola" remote is available from X10. See:
+ * http://www.x10.com/products/lola_sg1.htm
+ * The Lola is similar to the ATI remote but has no mouse support, and slightly
+ * different keys.
+ *
+ * It is possible to use multiple receivers and remotes on multiple computers
+ * simultaneously by configuring them to use specific channels.
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
+ * hardware.
+ *
+ * Each remote can be configured to transmit on one channel as follows:
+ * - Press and hold the "hand icon" button.
+ * - When the red LED starts to blink, let go of the "hand icon" button.
+ * - When it stops blinking, input the channel code as two digits, from 01
+ * to 16, and press the hand icon again.
+ *
+ * The timing can be a little tricky. Try loading the module with debug=1
+ * to have the kernel print out messages about the remote control number
+ * and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
+ *
+ * The driver has a "channel_mask" parameter. This bitmask specifies which
+ * channels will be ignored by the module. To mask out channels, just add
+ * all the 2^channel_number values together.
+ *
+ * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
+ * ignore signals coming from remote controls transmitting on channel 4, but
+ * accept all other channels.
+ *
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
+ * ignored.
+ *
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
+ * parameter are unused.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+
+/*
+ * Module and Version Information, Module Parameters
+ */
+
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID 0x0002
+#define LOLA2_REMOTE_PRODUCT_ID 0x0003
+#define ATI_REMOTE_PRODUCT_ID 0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
+#define MEDION_REMOTE_PRODUCT_ID 0x0006
+
+#define DRIVER_VERSION "2.2.1"
+#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
+#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
+
+#define NAME_BUFSIZE 80 /* size of product name, path buffers */
+#define DATA_BUFSIZE 63 /* size of URB data buffers */
+
+/*
+ * Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME milliseconds between them are considered as repeat
+ * events. The hardware generates 5 events for the first keypress
+ * and we have to take this into account for an accurate repeat
+ * behaviour.
+ */
+#define FILTER_TIME 60 /* msec */
+#define REPEAT_DELAY 500 /* msec */
+
+static unsigned long channel_mask;
+module_param(channel_mask, ulong, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+static int repeat_filter = FILTER_TIME;
+module_param(repeat_filter, int, 0644);
+MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+
+static int repeat_delay = REPEAT_DELAY;
+module_param(repeat_delay, int, 0644);
+MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+#undef err
+#define err(format, arg...) printk(KERN_ERR format , ## arg)
+
+static struct usb_device_id ati_remote_table[] = {
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ati_remote_table);
+
+/* Get hi and low bytes of a 16-bits int */
+#define HI(a) ((unsigned char)((a) >> 8))
+#define LO(a) ((unsigned char)((a) & 0xff))
+
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+
+/* Device initialization strings */
+static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
+static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
+
+struct ati_remote {
+ struct input_dev *idev;
+ struct usb_device *udev;
+ struct usb_interface *interface;
+
+ struct urb *irq_urb;
+ struct urb *out_urb;
+ struct usb_endpoint_descriptor *endpoint_in;
+ struct usb_endpoint_descriptor *endpoint_out;
+ unsigned char *inbuf;
+ unsigned char *outbuf;
+ dma_addr_t inbuf_dma;
+ dma_addr_t outbuf_dma;
+
+ unsigned char old_data[2]; /* Detect duplicate events */
+ unsigned long old_jiffies;
+ unsigned long acc_jiffies; /* handle acceleration */
+ unsigned long first_jiffies;
+
+ unsigned int repeat_count;
+
+ char name[NAME_BUFSIZE];
+ char phys[NAME_BUFSIZE];
+
+ wait_queue_head_t wait;
+ int send_flags;
+};
+
+/* "Kinds" of messages sent from the hardware to the driver. */
+#define KIND_END 0
+#define KIND_LITERAL 1 /* Simply pass to input system */
+#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
+#define KIND_LU 3 /* Directional keypad diagonals - left up, */
+#define KIND_RU 4 /* right up, */
+#define KIND_LD 5 /* left down, */
+#define KIND_RD 6 /* right down */
+#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
+
+/* Translation table from hardware messages to input events. */
+static const struct {
+ short kind;
+ unsigned char data1, data2;
+ int type;
+ unsigned int code;
+ int value;
+} ati_remote_tbl[] = {
+ /* Directional control pad axes */
+ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
+ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
+ {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
+ {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
+ /* Directional control pad diagonals */
+ {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
+ {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
+ {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
+ {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
+
+ /* "Mouse button" buttons */
+ {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+ {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+ {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+ {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+
+ /* Artificial "doubleclick" events are generated by the hardware.
+ * They are mapped to the "side" and "extra" mouse buttons here. */
+ {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+ {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+
+ /* keyboard. */
+ {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
+ {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
+ {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
+ {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
+ {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
+ {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
+ {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
+ {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
+ {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
+ {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
+ {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
+ {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
+ {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
+ {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
+ {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
+ {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
+
+ /* "special" keys */
+ {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
+ {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
+ {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
+ {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
+ {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
+ {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
+ {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
+ {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
+ {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
+ {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
+ {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
+ {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
+ {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
+ {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
+ {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
+ {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
+ {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
+ {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
+ {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
+ {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
+ {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
+ {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
+ {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
+ {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
+ {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
+ {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
+ {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
+ {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
+ {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
+ {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
+ {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
+ {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
+
+ {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+};
+
+/* Local function prototypes */
+static int ati_remote_open (struct input_dev *inputdev);
+static void ati_remote_close (struct input_dev *inputdev);
+static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
+static void ati_remote_irq_out (struct urb *urb);
+static void ati_remote_irq_in (struct urb *urb);
+static void ati_remote_input_report (struct urb *urb);
+static int ati_remote_initialize (struct ati_remote *ati_remote);
+static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
+static void ati_remote_disconnect (struct usb_interface *interface);
+
+/* usb specific object to register with the usb subsystem */
+static struct usb_driver ati_remote_driver = {
+ .name = "ati_remote",
+ .probe = ati_remote_probe,
+ .disconnect = ati_remote_disconnect,
+ .id_table = ati_remote_table,
+};
+
+/*
+ * ati_remote_dump_input
+ */
+static void ati_remote_dump(struct device *dev, unsigned char *data,
+ unsigned int len)
+{
+ if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
+ dev_warn(dev, "Weird byte 0x%02x\n", data[0]);
+ else if (len == 4)
+ dev_warn(dev, "Weird key %02x %02x %02x %02x\n",
+ data[0], data[1], data[2], data[3]);
+ else
+ dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n",
+ len, data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+/*
+ * ati_remote_open
+ */
+static int ati_remote_open(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+ /* On first open, submit the read urb which was set up previously. */
+ ati_remote->irq_urb->dev = ati_remote->udev;
+ if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
+ dev_err(&ati_remote->interface->dev,
+ "%s: usb_submit_urb failed!\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * ati_remote_close
+ */
+static void ati_remote_close(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+
+ usb_kill_urb(ati_remote->irq_urb);
+}
+
+/*
+ * ati_remote_irq_out
+ */
+static void ati_remote_irq_out(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+
+ if (urb->status) {
+ dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
+ __func__, urb->status);
+ return;
+ }
+
+ ati_remote->send_flags |= SEND_FLAG_COMPLETE;
+ wmb();
+ wake_up(&ati_remote->wait);
+}
+
+/*
+ * ati_remote_sendpacket
+ *
+ * Used to send device initialization strings
+ */
+static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
+{
+ int retval = 0;
+
+ /* Set up out_urb */
+ memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
+ ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
+
+ ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
+ ati_remote->out_urb->dev = ati_remote->udev;
+ ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
+
+ retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
+ if (retval) {
+ dev_dbg(&ati_remote->interface->dev,
+ "sendpacket: usb_submit_urb failed: %d\n", retval);
+ return retval;
+ }
+
+ wait_event_timeout(ati_remote->wait,
+ ((ati_remote->out_urb->status != -EINPROGRESS) ||
+ (ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+ HZ);
+ usb_kill_urb(ati_remote->out_urb);
+
+ return retval;
+}
+
+/*
+ * ati_remote_event_lookup
+ */
+static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
+{
+ int i;
+
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+ /*
+ * Decide if the table entry matches the remote input.
+ */
+ if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
+ ((((ati_remote_tbl[i].data1 >> 4) -
+ (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
+ (ati_remote_tbl[i].data2 == d2))
+ return i;
+
+ }
+ return -1;
+}
+
+/*
+ * ati_remote_compute_accel
+ *
+ * Implements acceleration curve for directional control pad
+ * If elapsed time since last event is > 1/4 second, user "stopped",
+ * so reset acceleration. Otherwise, user is probably holding the control
+ * pad down, so we increase acceleration, ramping up over two seconds to
+ * a maximum speed.
+ */
+static int ati_remote_compute_accel(struct ati_remote *ati_remote)
+{
+ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+ unsigned long now = jiffies;
+ int acc;
+
+ if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
+ acc = 1;
+ ati_remote->acc_jiffies = now;
+ }
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
+ acc = accel[0];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
+ acc = accel[1];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
+ acc = accel[2];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
+ acc = accel[3];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
+ acc = accel[4];
+ else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
+ acc = accel[5];
+ else
+ acc = accel[6];
+
+ return acc;
+}
+
+/*
+ * ati_remote_report_input
+ */
+static void ati_remote_input_report(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ unsigned char *data= ati_remote->inbuf;
+ struct input_dev *dev = ati_remote->idev;
+ int index, acc;
+ int remote_num;
+
+ /* Deal with strange looking inputs */
+ if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
+ ((data[3] & 0x0f) != 0x00) ) {
+ ati_remote_dump(&urb->dev->dev, data, urb->actual_length);
+ return;
+ }
+
+ /* Mask unwanted remote channels. */
+ /* note: remote_num is 0-based, channel 1 on remote == 0 here */
+ remote_num = (data[3] >> 4) & 0x0f;
+ if (channel_mask & (1 << (remote_num + 1))) {
+ dbginfo(&ati_remote->interface->dev,
+ "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
+ remote_num, data[1], data[2], channel_mask);
+ return;
+ }
+
+ /* Look up event code index in translation table */
+ index = ati_remote_event_lookup(remote_num, data[1], data[2]);
+ if (index < 0) {
+ dev_warn(&ati_remote->interface->dev,
+ "Unknown input from channel 0x%02x: data %02x,%02x\n",
+ remote_num, data[1], data[2]);
+ return;
+ }
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
+ remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+
+ if (ati_remote_tbl[index].kind == KIND_LITERAL) {
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value);
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ return;
+ }
+
+ if (ati_remote_tbl[index].kind == KIND_FILTERED) {
+ unsigned long now = jiffies;
+
+ /* Filter duplicate events which happen "too close" together. */
+ if (ati_remote->old_data[0] == data[1] &&
+ ati_remote->old_data[1] == data[2] &&
+ time_before(now, ati_remote->old_jiffies +
+ msecs_to_jiffies(repeat_filter))) {
+ ati_remote->repeat_count++;
+ } else {
+ ati_remote->repeat_count = 0;
+ ati_remote->first_jiffies = now;
+ }
+
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ ati_remote->old_jiffies = now;
+
+ /* Ensure we skip at least the 4 first duplicate events (generated
+ * by a single keypress), and continue skipping until repeat_delay
+ * msecs have passed
+ */
+ if (ati_remote->repeat_count > 0 &&
+ (ati_remote->repeat_count < 5 ||
+ time_before(now, ati_remote->first_jiffies +
+ msecs_to_jiffies(repeat_delay))))
+ return;
+
+
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 1);
+ input_sync(dev);
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code, 0);
+ input_sync(dev);
+
+ } else {
+
+ /*
+ * Other event kinds are from the directional control pad, and have an
+ * acceleration factor applied to them. Without this acceleration, the
+ * control pad is mostly unusable.
+ */
+ acc = ati_remote_compute_accel(ati_remote);
+
+ switch (ati_remote_tbl[index].kind) {
+ case KIND_ACCEL:
+ input_event(dev, ati_remote_tbl[index].type,
+ ati_remote_tbl[index].code,
+ ati_remote_tbl[index].value * acc);
+ break;
+ case KIND_LU:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_RU:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, -acc);
+ break;
+ case KIND_LD:
+ input_report_rel(dev, REL_X, -acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ case KIND_RD:
+ input_report_rel(dev, REL_X, acc);
+ input_report_rel(dev, REL_Y, acc);
+ break;
+ default:
+ dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+ ati_remote_tbl[index].kind);
+ }
+ input_sync(dev);
+
+ ati_remote->old_jiffies = jiffies;
+ ati_remote->old_data[0] = data[1];
+ ati_remote->old_data[1] = data[2];
+ }
+}
+
+/*
+ * ati_remote_irq_in
+ */
+static void ati_remote_irq_in(struct urb *urb)
+{
+ struct ati_remote *ati_remote = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0: /* success */
+ ati_remote_input_report(urb);
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
+ __func__);
+ return;
+ default: /* error */
+ dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
+ __func__, urb->status);
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
+ __func__, retval);
+}
+
+/*
+ * ati_remote_alloc_buffers
+ */
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+ struct ati_remote *ati_remote)
+{
+ ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->inbuf_dma);
+ if (!ati_remote->inbuf)
+ return -1;
+
+ ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+ &ati_remote->outbuf_dma);
+ if (!ati_remote->outbuf)
+ return -1;
+
+ ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->irq_urb)
+ return -1;
+
+ ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->out_urb)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
+{
+ usb_free_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->out_urb);
+
+ usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->inbuf, ati_remote->inbuf_dma);
+
+ usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
+ ati_remote->outbuf, ati_remote->outbuf_dma);
+}
+
+static void ati_remote_input_init(struct ati_remote *ati_remote)
+{
+ struct input_dev *idev = ati_remote->idev;
+ int i;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
+ idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
+ if (ati_remote_tbl[i].type == EV_KEY)
+ set_bit(ati_remote_tbl[i].code, idev->keybit);
+
+ input_set_drvdata(idev, ati_remote);
+
+ idev->open = ati_remote_open;
+ idev->close = ati_remote_close;
+
+ idev->name = ati_remote->name;
+ idev->phys = ati_remote->phys;
+
+ usb_to_input_id(ati_remote->udev, &idev->id);
+ idev->dev.parent = &ati_remote->udev->dev;
+}
+
+static int ati_remote_initialize(struct ati_remote *ati_remote)
+{
+ struct usb_device *udev = ati_remote->udev;
+ int pipe, maxp;
+
+ init_waitqueue_head(&ati_remote->wait);
+
+ /* Set up irq_urb */
+ pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
+ maxp, ati_remote_irq_in, ati_remote,
+ ati_remote->endpoint_in->bInterval);
+ ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
+ ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Set up out_urb */
+ pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
+
+ usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
+ maxp, ati_remote_irq_out, ati_remote,
+ ati_remote->endpoint_out->bInterval);
+ ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
+ ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* send initialization strings */
+ if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
+ (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
+ dev_err(&ati_remote->interface->dev,
+ "Initializing ati_remote hardware failed.\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * ati_remote_probe
+ */
+static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *iface_host = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+ struct ati_remote *ati_remote;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ if (iface_host->desc.bNumEndpoints != 2) {
+ err("%s: Unexpected desc.bNumEndpoints\n", __func__);
+ return -ENODEV;
+ }
+
+ endpoint_in = &iface_host->endpoint[0].desc;
+ endpoint_out = &iface_host->endpoint[1].desc;
+
+ if (!usb_endpoint_is_int_in(endpoint_in)) {
+ err("%s: Unexpected endpoint_in\n", __func__);
+ return -ENODEV;
+ }
+ if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
+ err("%s: endpoint_in message size==0? \n", __func__);
+ return -ENODEV;
+ }
+
+ ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ati_remote || !input_dev)
+ goto fail1;
+
+ /* Allocate URB buffers, URBs */
+ if (ati_remote_alloc_buffers(udev, ati_remote))
+ goto fail2;
+
+ ati_remote->endpoint_in = endpoint_in;
+ ati_remote->endpoint_out = endpoint_out;
+ ati_remote->udev = udev;
+ ati_remote->idev = input_dev;
+ ati_remote->interface = interface;
+
+ usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
+ strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+
+ if (udev->manufacturer)
+ strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
+
+ if (udev->product)
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ "%s %s", ati_remote->name, udev->product);
+
+ if (!strlen(ati_remote->name))
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ DRIVER_DESC "(%04x,%04x)",
+ le16_to_cpu(ati_remote->udev->descriptor.idVendor),
+ le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+
+ ati_remote_input_init(ati_remote);
+
+ /* Device Hardware Initialization - fills in ati_remote->idev from udev. */
+ err = ati_remote_initialize(ati_remote);
+ if (err)
+ goto fail3;
+
+ /* Set up and register input device */
+ err = input_register_device(ati_remote->idev);
+ if (err)
+ goto fail3;
+
+ usb_set_intfdata(interface, ati_remote);
+ return 0;
+
+ fail3: usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ fail2: ati_remote_free_buffers(ati_remote);
+ fail1: input_free_device(input_dev);
+ kfree(ati_remote);
+ return err;
+}
+
+/*
+ * ati_remote_disconnect
+ */
+static void ati_remote_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote *ati_remote;
+
+ ati_remote = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+ if (!ati_remote) {
+ dev_warn(&interface->dev, "%s - null device?\n", __func__);
+ return;
+ }
+
+ usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ input_unregister_device(ati_remote->idev);
+ ati_remote_free_buffers(ati_remote);
+ kfree(ati_remote);
+}
+
+/*
+ * ati_remote_init
+ */
+static int __init ati_remote_init(void)
+{
+ int result;
+
+ result = usb_register(&ati_remote_driver);
+ if (result)
+ printk(KERN_ERR KBUILD_MODNAME
+ ": usb_register error #%d\n", result);
+ else
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+
+ return result;
+}
+
+/*
+ * ati_remote_exit
+ */
+static void __exit ati_remote_exit(void)
+{
+ usb_deregister(&ati_remote_driver);
+}
+
+/*
+ * module specification
+ */
+
+module_init(ati_remote_init);
+module_exit(ati_remote_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
--
1.7.4.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/7] [media] ati_remote: migrate to the rc subsystem
2011-08-06 22:18 ` [PATCH 0/7] ati_remote: move to rc-core and other updates Anssi Hannula
2011-08-06 22:18 ` [PATCH 1/7] [media] move ati_remote driver from input/misc to media/rc Anssi Hannula
@ 2011-08-06 22:18 ` Anssi Hannula
2011-08-06 22:18 ` [PATCH 3/7] [media] ati_remote: parent input devices to usb interface Anssi Hannula
` (4 subsequent siblings)
6 siblings, 0 replies; 18+ messages in thread
From: Anssi Hannula @ 2011-08-06 22:18 UTC (permalink / raw)
To: dmitry.torokhov; +Cc: linux-media, linux-input, linux-kernel
Migrate the ATI/X10 RF remote driver to the rc subsystem, allowing the
use of its keymap handling capabilities.
The mouse handling is kept in-driver and now appears as a separate input
device which can be disabled with a new module option (autodetection
would be possible based on receiver, but it wouldn't account for cases
where a remote with mouse is used with a receiver that came with a
remote without mouse).
The remotes have 4-bit programmable IDs, so it would be possible to
support simultaneous use of multiple remotes with different keymaps with
each remote appearing as a separate input device; however,
implementation of that is left for a later date.
The driver previously transmitted all events as keydown/keyup
combinations. That behavior is kept (at least for now) to avoid the
current issue with rc-core where repeat events continue after a button
is released, since that would be a clear regression for this driver.
The keycode mangling algorithm is kept the same, so the new external
keymap has the same values as the old static table.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
---
drivers/media/rc/Kconfig | 1 +
drivers/media/rc/ati_remote.c | 262 ++++++++++++++++++++-------------
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-ati-x10.c | 103 +++++++++++++
include/media/rc-map.h | 1 +
5 files changed, 269 insertions(+), 99 deletions(-)
create mode 100644 drivers/media/rc/keymaps/rc-ati-x10.c
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 4a5b4a6..26937b2 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -100,6 +100,7 @@ config IR_LIRC_CODEC
config RC_ATI_REMOTE
tristate "ATI / X10 USB RF remote control"
depends on USB_ARCH_HAS_HCD
+ depends on RC_CORE
select USB
help
Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index bce5712..a1df21f 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -1,6 +1,7 @@
/*
* USB ATI Remote support
*
+ * Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi>
* Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
* Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
*
@@ -90,9 +91,11 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/usb/input.h>
#include <linux/wait.h>
#include <linux/jiffies.h>
+#include <media/rc-core.h>
/*
* Module and Version Information, Module Parameters
@@ -139,6 +142,10 @@ static int repeat_delay = REPEAT_DELAY;
module_param(repeat_delay, int, 0644);
MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+static bool mouse = true;
+module_param(mouse, bool, 0444);
+MODULE_PARM_DESC(mouse, "Enable mouse device, default = yes");
+
#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
#undef err
#define err(format, arg...) printk(KERN_ERR format , ## arg)
@@ -167,6 +174,7 @@ static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
struct ati_remote {
struct input_dev *idev;
+ struct rc_dev *rdev;
struct usb_device *udev;
struct usb_interface *interface;
@@ -186,11 +194,16 @@ struct ati_remote {
unsigned int repeat_count;
- char name[NAME_BUFSIZE];
- char phys[NAME_BUFSIZE];
+ char rc_name[NAME_BUFSIZE];
+ char rc_phys[NAME_BUFSIZE];
+ char mouse_name[NAME_BUFSIZE];
+ char mouse_phys[NAME_BUFSIZE];
wait_queue_head_t wait;
int send_flags;
+
+ int users; /* 0-2, users are rc and input */
+ struct mutex open_mutex;
};
/* "Kinds" of messages sent from the hardware to the driver. */
@@ -233,64 +246,11 @@ static const struct {
{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
- /* keyboard. */
- {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
- {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
- {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
- {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
- {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
- {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
- {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
- {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
- {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
- {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
- {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
- {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
- {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
- {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
- {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
- {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
-
- /* "special" keys */
- {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
- {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
- {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
- {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
- {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
- {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
- {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
- {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
- {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
- {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
- {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
- {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
- {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
- {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
- {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
- {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
- {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
- {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
- {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
- {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
- {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
- {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
- {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
- {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
- {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
- {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
- {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
- {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
- {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
- {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
- {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
- {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
-
+ /* Non-mouse events are handled by rc-core */
{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
};
/* Local function prototypes */
-static int ati_remote_open (struct input_dev *inputdev);
-static void ati_remote_close (struct input_dev *inputdev);
static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
static void ati_remote_irq_out (struct urb *urb);
static void ati_remote_irq_in (struct urb *urb);
@@ -326,29 +286,60 @@ static void ati_remote_dump(struct device *dev, unsigned char *data,
/*
* ati_remote_open
*/
-static int ati_remote_open(struct input_dev *inputdev)
+static int ati_remote_open(struct ati_remote *ati_remote)
{
- struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+ int err = 0;
+
+ mutex_lock(&ati_remote->open_mutex);
+
+ if (ati_remote->users++ != 0)
+ goto out; /* one was already active */
/* On first open, submit the read urb which was set up previously. */
ati_remote->irq_urb->dev = ati_remote->udev;
if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
dev_err(&ati_remote->interface->dev,
"%s: usb_submit_urb failed!\n", __func__);
- return -EIO;
+ err = -EIO;
}
- return 0;
+out: mutex_unlock(&ati_remote->open_mutex);
+ return err;
}
/*
* ati_remote_close
*/
-static void ati_remote_close(struct input_dev *inputdev)
+static void ati_remote_close(struct ati_remote *ati_remote)
+{
+ mutex_lock(&ati_remote->open_mutex);
+ if (--ati_remote->users == 0)
+ usb_kill_urb(ati_remote->irq_urb);
+ mutex_unlock(&ati_remote->open_mutex);
+}
+
+static int ati_remote_input_open(struct input_dev *inputdev)
{
struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+ return ati_remote_open(ati_remote);
+}
- usb_kill_urb(ati_remote->irq_urb);
+static void ati_remote_input_close(struct input_dev *inputdev)
+{
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
+ ati_remote_close(ati_remote);
+}
+
+static int ati_remote_rc_open(struct rc_dev *rdev)
+{
+ struct ati_remote *ati_remote = rdev->priv;
+ return ati_remote_open(ati_remote);
+}
+
+static void ati_remote_rc_close(struct rc_dev *rdev)
+{
+ struct ati_remote *ati_remote = rdev->priv;
+ ati_remote_close(ati_remote);
}
/*
@@ -413,10 +404,8 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
/*
* Decide if the table entry matches the remote input.
*/
- if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
- ((((ati_remote_tbl[i].data1 >> 4) -
- (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
- (ati_remote_tbl[i].data2 == d2))
+ if (ati_remote_tbl[i].data1 == d1 &&
+ ati_remote_tbl[i].data2 == d2)
return i;
}
@@ -468,8 +457,10 @@ static void ati_remote_input_report(struct urb *urb)
struct ati_remote *ati_remote = urb->context;
unsigned char *data= ati_remote->inbuf;
struct input_dev *dev = ati_remote->idev;
- int index, acc;
+ int index = -1;
+ int acc;
int remote_num;
+ unsigned char scancode[2];
/* Deal with strange looking inputs */
if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
@@ -488,19 +479,26 @@ static void ati_remote_input_report(struct urb *urb)
return;
}
- /* Look up event code index in translation table */
- index = ati_remote_event_lookup(remote_num, data[1], data[2]);
- if (index < 0) {
- dev_warn(&ati_remote->interface->dev,
- "Unknown input from channel 0x%02x: data %02x,%02x\n",
- remote_num, data[1], data[2]);
- return;
- }
- dbginfo(&ati_remote->interface->dev,
- "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
- remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+ scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f));
- if (ati_remote_tbl[index].kind == KIND_LITERAL) {
+ scancode[1] = data[2];
+
+ /* Look up event code index in mouse translation table. */
+ index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]);
+
+ if (index >= 0) {
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n",
+ remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+ if (!dev)
+ return; /* no mouse device */
+ } else
+ dbginfo(&ati_remote->interface->dev,
+ "channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n",
+ remote_num, data[1], data[2], scancode[0], scancode[1]);
+
+
+ if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) {
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code,
ati_remote_tbl[index].value);
@@ -510,7 +508,7 @@ static void ati_remote_input_report(struct urb *urb)
return;
}
- if (ati_remote_tbl[index].kind == KIND_FILTERED) {
+ if (index < 0 || ati_remote_tbl[index].kind == KIND_FILTERED) {
unsigned long now = jiffies;
/* Filter duplicate events which happen "too close" together. */
@@ -538,6 +536,19 @@ static void ati_remote_input_report(struct urb *urb)
msecs_to_jiffies(repeat_delay))))
return;
+ if (index < 0) {
+ /* Not a mouse event, hand it to rc-core. */
+ u32 rc_code = (scancode[0] << 8) | scancode[1];
+
+ /*
+ * We don't use the rc-core repeat handling yet as
+ * it would cause ghost repeats which would be a
+ * regression for this driver.
+ */
+ rc_keydown_notimeout(ati_remote->rdev, rc_code, 0);
+ rc_keyup(ati_remote->rdev);
+ return;
+ }
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code, 1);
@@ -675,16 +686,37 @@ static void ati_remote_input_init(struct ati_remote *ati_remote)
input_set_drvdata(idev, ati_remote);
- idev->open = ati_remote_open;
- idev->close = ati_remote_close;
+ idev->open = ati_remote_input_open;
+ idev->close = ati_remote_input_close;
- idev->name = ati_remote->name;
- idev->phys = ati_remote->phys;
+ idev->name = ati_remote->mouse_name;
+ idev->phys = ati_remote->mouse_phys;
usb_to_input_id(ati_remote->udev, &idev->id);
idev->dev.parent = &ati_remote->udev->dev;
}
+static void ati_remote_rc_init(struct ati_remote *ati_remote)
+{
+ struct rc_dev *rdev = ati_remote->rdev;
+
+ rdev->priv = ati_remote;
+ rdev->driver_type = RC_DRIVER_SCANCODE;
+ rdev->allowed_protos = RC_TYPE_OTHER;
+ rdev->driver_name = "ati_remote";
+
+ rdev->open = ati_remote_rc_open;
+ rdev->close = ati_remote_rc_close;
+
+ rdev->input_name = ati_remote->rc_name;
+ rdev->input_phys = ati_remote->rc_phys;
+
+ usb_to_input_id(ati_remote->udev, &rdev->input_id);
+ rdev->dev.parent = &ati_remote->udev->dev;
+
+ rdev->map_name = RC_MAP_ATI_X10;
+}
+
static int ati_remote_initialize(struct ati_remote *ati_remote)
{
struct usb_device *udev = ati_remote->udev;
@@ -735,6 +767,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
struct ati_remote *ati_remote;
struct input_dev *input_dev;
+ struct rc_dev *rc_dev;
int err = -ENOMEM;
if (iface_host->desc.bNumEndpoints != 2) {
@@ -755,8 +788,8 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
}
ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ati_remote || !input_dev)
+ rc_dev = rc_allocate_device();
+ if (!ati_remote || !rc_dev)
goto fail1;
/* Allocate URB buffers, URBs */
@@ -766,44 +799,73 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
ati_remote->endpoint_in = endpoint_in;
ati_remote->endpoint_out = endpoint_out;
ati_remote->udev = udev;
- ati_remote->idev = input_dev;
+ ati_remote->rdev = rc_dev;
ati_remote->interface = interface;
- usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
- strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+ usb_make_path(udev, ati_remote->rc_phys, sizeof(ati_remote->rc_phys));
+ strlcpy(ati_remote->mouse_phys, ati_remote->rc_phys,
+ sizeof(ati_remote->mouse_phys));
+
+ strlcat(ati_remote->rc_phys, "/input0", sizeof(ati_remote->rc_phys));
+ strlcat(ati_remote->mouse_phys, "/input1", sizeof(ati_remote->mouse_phys));
if (udev->manufacturer)
- strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
+ strlcpy(ati_remote->rc_name, udev->manufacturer,
+ sizeof(ati_remote->rc_name));
if (udev->product)
- snprintf(ati_remote->name, sizeof(ati_remote->name),
- "%s %s", ati_remote->name, udev->product);
+ snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name),
+ "%s %s", ati_remote->rc_name, udev->product);
- if (!strlen(ati_remote->name))
- snprintf(ati_remote->name, sizeof(ati_remote->name),
+ if (!strlen(ati_remote->rc_name))
+ snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name),
DRIVER_DESC "(%04x,%04x)",
le16_to_cpu(ati_remote->udev->descriptor.idVendor),
le16_to_cpu(ati_remote->udev->descriptor.idProduct));
- ati_remote_input_init(ati_remote);
+ snprintf(ati_remote->mouse_name, sizeof(ati_remote->mouse_name),
+ "%s mouse", ati_remote->rc_name);
+ ati_remote_rc_init(ati_remote);
+ mutex_init(&ati_remote->open_mutex);
+
/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
err = ati_remote_initialize(ati_remote);
if (err)
goto fail3;
- /* Set up and register input device */
- err = input_register_device(ati_remote->idev);
+ /* Set up and register rc device */
+ err = rc_register_device(ati_remote->rdev);
if (err)
goto fail3;
+ /* use our delay for rc_dev */
+ ati_remote->rdev->input_dev->rep[REP_DELAY] = repeat_delay;
+
+ /* Set up and register mouse input device */
+ if (mouse) {
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ goto fail4;
+
+ ati_remote->idev = input_dev;
+ ati_remote_input_init(ati_remote);
+ err = input_register_device(input_dev);
+
+ if (err)
+ goto fail5;
+ }
+
usb_set_intfdata(interface, ati_remote);
return 0;
+ fail5: input_free_device(input_dev);
+ fail4: rc_unregister_device(rc_dev);
+ rc_dev = NULL;
fail3: usb_kill_urb(ati_remote->irq_urb);
usb_kill_urb(ati_remote->out_urb);
fail2: ati_remote_free_buffers(ati_remote);
- fail1: input_free_device(input_dev);
+ fail1: rc_free_device(rc_dev);
kfree(ati_remote);
return err;
}
@@ -824,7 +886,9 @@ static void ati_remote_disconnect(struct usb_interface *interface)
usb_kill_urb(ati_remote->irq_urb);
usb_kill_urb(ati_remote->out_urb);
- input_unregister_device(ati_remote->idev);
+ if (ati_remote->idev)
+ input_unregister_device(ati_remote->idev);
+ rc_unregister_device(ati_remote->rdev);
ati_remote_free_buffers(ati_remote);
kfree(ati_remote);
}
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index 85cac7d..3ca9265b7 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
rc-apac-viewcomp.o \
rc-asus-pc39.o \
rc-ati-tv-wonder-hd-600.o \
+ rc-ati-x10.o \
rc-avermedia-a16d.o \
rc-avermedia.o \
rc-avermedia-cardbus.o \
diff --git a/drivers/media/rc/keymaps/rc-ati-x10.c b/drivers/media/rc/keymaps/rc-ati-x10.c
new file mode 100644
index 0000000..c1a055e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-ati-x10.c
@@ -0,0 +1,103 @@
+/*
+ * ATI X10 RF remote keytable
+ *
+ * Copyright (C) 2011 Anssi Hannula <anssi.hannula@ıki.fi>
+ *
+ * This file is based on the static generic keytable previously found in
+ * ati_remote.c, which is
+ * Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
+ * Copyright (c) 2002 Vladimir Dergachev
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table ati_x10[] = {
+ { 0xd20d, KEY_1 },
+ { 0xd30e, KEY_2 },
+ { 0xd40f, KEY_3 },
+ { 0xd510, KEY_4 },
+ { 0xd611, KEY_5 },
+ { 0xd712, KEY_6 },
+ { 0xd813, KEY_7 },
+ { 0xd914, KEY_8 },
+ { 0xda15, KEY_9 },
+ { 0xdc17, KEY_0 },
+ { 0xc500, KEY_A },
+ { 0xc601, KEY_B },
+ { 0xde19, KEY_C },
+ { 0xe01b, KEY_D },
+ { 0xe621, KEY_E },
+ { 0xe823, KEY_F },
+
+ { 0xdd18, KEY_KPENTER }, /* "check" */
+ { 0xdb16, KEY_MENU }, /* "menu" */
+ { 0xc702, KEY_POWER }, /* Power */
+ { 0xc803, KEY_TV }, /* TV */
+ { 0xc904, KEY_DVD }, /* DVD */
+ { 0xca05, KEY_WWW }, /* WEB */
+ { 0xcb06, KEY_BOOKMARKS }, /* "book" */
+ { 0xcc07, KEY_EDIT }, /* "hand" */
+ { 0xe11c, KEY_COFFEE }, /* "timer" */
+ { 0xe520, KEY_FRONT }, /* "max" */
+ { 0xe21d, KEY_LEFT }, /* left */
+ { 0xe41f, KEY_RIGHT }, /* right */
+ { 0xe722, KEY_DOWN }, /* down */
+ { 0xdf1a, KEY_UP }, /* up */
+ { 0xe31e, KEY_OK }, /* "OK" */
+ { 0xce09, KEY_VOLUMEDOWN }, /* VOL + */
+ { 0xcd08, KEY_VOLUMEUP }, /* VOL - */
+ { 0xcf0a, KEY_MUTE }, /* MUTE */
+ { 0xd00b, KEY_CHANNELUP }, /* CH + */
+ { 0xd10c, KEY_CHANNELDOWN },/* CH - */
+ { 0xec27, KEY_RECORD }, /* ( o) red */
+ { 0xea25, KEY_PLAY }, /* ( >) */
+ { 0xe924, KEY_REWIND }, /* (<<) */
+ { 0xeb26, KEY_FORWARD }, /* (>>) */
+ { 0xed28, KEY_STOP }, /* ([]) */
+ { 0xee29, KEY_PAUSE }, /* ('') */
+ { 0xf02b, KEY_PREVIOUS }, /* (<-) */
+ { 0xef2a, KEY_NEXT }, /* (>+) */
+ { 0xf22d, KEY_INFO }, /* PLAYING */
+ { 0xf32e, KEY_HOME }, /* TOP */
+ { 0xf42f, KEY_END }, /* END */
+ { 0xf530, KEY_SELECT }, /* SELECT */
+};
+
+static struct rc_map_list ati_x10_map = {
+ .map = {
+ .scan = ati_x10,
+ .size = ARRAY_SIZE(ati_x10),
+ .rc_type = RC_TYPE_OTHER,
+ .name = RC_MAP_ATI_X10,
+ }
+};
+
+static int __init init_rc_map_ati_x10(void)
+{
+ return rc_map_register(&ati_x10_map);
+}
+
+static void __exit exit_rc_map_ati_x10(void)
+{
+ rc_map_unregister(&ati_x10_map);
+}
+
+module_init(init_rc_map_ati_x10)
+module_exit(exit_rc_map_ati_x10)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 9184751..09e4451 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -60,6 +60,7 @@ void rc_map_init(void);
#define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp"
#define RC_MAP_ASUS_PC39 "rc-asus-pc39"
#define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600"
+#define RC_MAP_ATI_X10 "rc-ati-x10"
#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d"
#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus"
#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt"
--
1.7.4.4
^ permalink raw reply related [flat|nested] 18+ messages in thread