From: Liam Girdwood <lrg@kernel.org>
To: dahuang@nvidia.com
Cc: broonie@opensource.wolfsonmicro.com, lrg@ti.com,
mike@compulab.co.il, sameo@linux.intel.com, xxie@nvidia.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] regulator: tps6586x: add SMx slew rate setting
Date: Sun, 28 Aug 2011 17:49:41 +0100 [thread overview]
Message-ID: <1314550181.3666.7.camel@odin> (raw)
In-Reply-To: <1312886870-17451-1-git-send-email-dahuang@nvidia.com>
On Tue, 2011-08-09 at 18:47 +0800, dahuang@nvidia.com wrote:
> From: Xin Xie <xxie@nvidia.com>
>
> Add output vlotage slew rate setting for SM0/SM1
>
> Signed-off-by: Xin Xie <xxie@nvidia.com>
> Signed-off-by: Danny Huang <dahuang@nvidia.com>
> ---
> drivers/regulator/tps6586x-regulator.c | 32 +++++++++++++++++++++++++++++++-
> include/linux/mfd/tps6586x.h | 16 ++++++++++++++++
> 2 files changed, 47 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
> index bb04a75..dbcf09d 100644
> --- a/drivers/regulator/tps6586x-regulator.c
> +++ b/drivers/regulator/tps6586x-regulator.c
> @@ -332,6 +332,36 @@ static inline int tps6586x_regulator_preinit(struct device *parent,
> 1 << ri->enable_bit[1]);
> }
>
> +static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
> +{
> + struct device *parent = pdev->dev.parent;
> + struct regulator_init_data *p = pdev->dev.platform_data;
> + struct tps6586x_settings *setting = p->driver_data;
> + uint8_t reg;
> +
> + if (setting == NULL)
> + return 0;
> +
> + if (!(setting->slew_rate & TPS6586X_SLEW_RATE_SET))
> + return 0;
> +
> + /* only SM0 and SM1 can have the slew rate settings */
> + switch (pdev->id) {
> + case TPS6586X_ID_SM_0:
> + reg = TPS6586X_SM0SL;
> + break;
> + case TPS6586X_ID_SM_1:
> + reg = TPS6586X_SM1SL;
> + break;
> + default:
> + dev_warn(&pdev->dev, "Only SM0/SM1 can set slew rate\n");
> + return -EINVAL;
> + }
> +
> + return tps6586x_write(parent, reg,
> + setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
> +}
> +
> static inline struct tps6586x_regulator *find_regulator_info(int id)
> {
> struct tps6586x_regulator *ri;
> @@ -374,7 +404,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, rdev);
>
> - return 0;
> + return tps6586x_regulator_set_slew_rate(pdev);
> }
>
> static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
> diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
> index b6bab1b..b19176e 100644
> --- a/include/linux/mfd/tps6586x.h
> +++ b/include/linux/mfd/tps6586x.h
> @@ -1,6 +1,18 @@
> #ifndef __LINUX_MFD_TPS6586X_H
> #define __LINUX_MFD_TPS6586X_H
>
> +#define TPS6586X_SLEW_RATE_INSTANTLY 0x00
> +#define TPS6586X_SLEW_RATE_110UV 0x01
> +#define TPS6586X_SLEW_RATE_220UV 0x02
> +#define TPS6586X_SLEW_RATE_440UV 0x03
> +#define TPS6586X_SLEW_RATE_880UV 0x04
> +#define TPS6586X_SLEW_RATE_1760UV 0x05
> +#define TPS6586X_SLEW_RATE_3520UV 0x06
> +#define TPS6586X_SLEW_RATE_7040UV 0x07
> +
> +#define TPS6586X_SLEW_RATE_SET 0x08
> +#define TPS6586X_SLEW_RATE_MASK 0x07
> +
> enum {
> TPS6586X_ID_SM_0,
> TPS6586X_ID_SM_1,
> @@ -48,6 +60,10 @@ enum {
> TPS6586X_INT_RTC_ALM2,
> };
>
> +struct tps6586x_settings {
> + int slew_rate;
> +};
> +
> struct tps6586x_subdev_info {
> int id;
> const char *name;
Applied.
Thanks
Liam
next prev parent reply other threads:[~2011-08-28 16:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-09 10:47 [PATCH] regulator: tps6586x: add SMx slew rate setting dahuang
2011-08-09 16:06 ` Mark Brown
2011-08-22 9:35 ` Samuel Ortiz
2011-08-22 9:41 ` Liam Girdwood
2011-08-28 16:49 ` Liam Girdwood [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-08-04 11:34 dahuang
2011-08-04 12:12 ` Mark Brown
2011-08-05 11:51 ` Danny Huang
2011-08-08 9:37 ` Mark Brown
2011-08-08 12:28 ` Danny Huang
2011-08-08 13:32 ` Mark Brown
2011-08-04 12:42 ` Mark Brown
2011-08-05 11:53 ` Danny Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314550181.3666.7.camel@odin \
--to=lrg@kernel.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dahuang@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=mike@compulab.co.il \
--cc=sameo@linux.intel.com \
--cc=xxie@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).