* [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3
@ 2012-01-18 7:24 Olof Johansson
2012-01-18 7:24 ` [GIT PULL 1/2] arm-soc: late driver changes Olof Johansson
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Olof Johansson @ 2012-01-18 7:24 UTC (permalink / raw)
To: torvalds; +Cc: linux-arm-kernel, linux-kernel, arnd, arm
Hi Linus,
As mentioned with the first pull requests by Arnd, we had two sets of
changes in arm-soc that were held until later in the merge window. One
depended on external driver trees, and the other is a large code move
that is best merged towards the end of the window. Here they are.
Thanks!
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL 1/2] arm-soc: late driver changes
2012-01-18 7:24 [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
@ 2012-01-18 7:24 ` Olof Johansson
2012-01-18 7:24 ` [GIT PULL 2/2] arm-soc: i.MX platform consolidation Olof Johansson
2012-01-23 7:27 ` [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
2 siblings, 0 replies; 4+ messages in thread
From: Olof Johansson @ 2012-01-18 7:24 UTC (permalink / raw)
To: torvalds; +Cc: linux-arm-kernel, linux-kernel, arnd, arm
Hi Linus,
Below is the last new code pull request for arm-soc for this merge
window. It has been pending on the v4l and dma-engine trees going in,
which is why it's this late in the window.
Some of this was really messy to deal with this development window,
and Arnd did the work on sorting it out. It's done in the merges of
the per-vendor branches into this shared branch, see those if you want
the details.
There is one remaining trivial merge conflict on the pl330 driver,
the contents from HEAD is the right one to keep.
Thanks,
-Olof
The following changes since commit 142f2101a86ade2d6c9dfbedf82e1b5b31c8fce6:
Merge branch 'samsung/cleanup' into samsung/driver (2012-01-09 16:14:07 +0000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git arm-soc-drivers-late
for you to fetch changes up to 4bd7c44a7c4fad5ccc74ab9cafa327ba13b7080e:
ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board (2012-01-17 21:32:08 -0800)
----------------------------------------------------------------
Late-merge batch of driver changes for arm-soc. Branches that had
dependencies on other trees that have now landed upstream, so these can
go in:
* A driver branch for Samsung which includes a move of the pl330 driver
from arch/arm to drivers/dma
* RTC updates for Samsung
* AT91 updates that depended on the dma-slave tree
* I also cherry-picked in two of the changes that depended on v4l that
we were considering dropping for this merge window, but they apply
cleanly now and build so I brought them in.
The merges of Samsung branches were quite conflict ridden due to changes
colliding with the moves, the chnages are further documented in the merge
changesets by Arnd.
----------------------------------------------------------------
Arnd Bergmann (8):
Merge branch 'next-samsung-devel-dma' of git://git.kernel.org/.../kgene/linux-samsung into samsung/dma
Merge branches 'samsung/dt' and 'depends/dma-slave/next' into next/drivers2
Merge branch 'samsung/dma' into next/drivers2
Merge branch 'next-samsung-devel-rtc' of git://git.kernel.org/.../kgene/linux-samsung into samsung/rtc
Merge branch 'samsung/rtc' into next/drivers2
Merge branch 'samsung/driver' into next/drivers3
Merge branch 'for-arnd-3.3-device_boardV3' of git://github.com/at91linux/linux-at91 into at91/board
Merge branch 'at91/board' into next/drivers3
Boojin Kim (5):
DMA: PL330: Merge PL330 driver into drivers/dma/
DMA: PL330: Removes useless function
DMA: PL330: Support MEMTOMEM transmit w/o RMB, WMB
ARM: EXYNOS: Enable MDMA driver
ARM: EXYNOS: Support DMA for EXYNOS4X12 SoCs
Heiko Stuebner (4):
ARM: SAMSUNG: cleanup of rtc register definitions
rtc-s3c: make room for more variants in devicetree block
rtc-s3c: add variants for S3C2443 and S3C2416
ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices
Hong Xu (1):
ARM: at91: Update struct atmel_nand_data to support PMECC
Josh Wu (2):
ARM: at91: add clock selection parameter for at91_add_device_isi()
ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board
Kukjin Kim (1):
Merge branch 'next-samsung-devel-dt1' into for-vkoul-samsung-dma
Nicolas Ferre (2):
ARM: at91/dma: remove platform data from DMA controller
ARM: at91/dma: DMA controller registering with DT support
Tushar Behera (1):
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
arch/arm/common/Kconfig | 3 -
arch/arm/common/Makefile | 1 -
arch/arm/common/pl330.c | 1959 ------------------------
arch/arm/include/asm/hardware/pl330.h | 338 +++--
arch/arm/mach-at91/at91sam9263_devices.c | 13 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 113 ++-
arch/arm/mach-at91/at91sam9rl_devices.c | 8 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 80 +-
arch/arm/mach-at91/include/mach/board.h | 6 +-
arch/arm/mach-exynos/clock.c | 9 +
arch/arm/mach-exynos/dma.c | 130 ++-
arch/arm/mach-exynos/include/mach/irqs.h | 2 +
arch/arm/mach-exynos/include/mach/map.h | 3 +-
arch/arm/mach-s3c2416/s3c2416.c | 2 +
arch/arm/mach-s3c2443/s3c2443.c | 2 +
arch/arm/plat-samsung/include/plat/dma-pl330.h | 16 +
arch/arm/plat-samsung/include/plat/regs-rtc.h | 81 +-
arch/arm/plat-samsung/include/plat/rtc-core.h | 27 +
drivers/dma/Kconfig | 1 -
drivers/dma/pl330.c | 1850 ++++++++++++++++++++++
drivers/rtc/rtc-s3c.c | 71 +-
21 files changed, 2517 insertions(+), 2198 deletions(-)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL 2/2] arm-soc: i.MX platform consolidation
2012-01-18 7:24 [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
2012-01-18 7:24 ` [GIT PULL 1/2] arm-soc: late driver changes Olof Johansson
@ 2012-01-18 7:24 ` Olof Johansson
2012-01-23 7:27 ` [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
2 siblings, 0 replies; 4+ messages in thread
From: Olof Johansson @ 2012-01-18 7:24 UTC (permalink / raw)
To: torvalds; +Cc: linux-arm-kernel, linux-kernel, arnd, arm
Hi Linus,
This is the last merge request for arm-soc for the 3.3 merge window,
and it's a move to consolidate one of the Freescale platforms into a
larger combined one.
There are some context merge conflicts due to concurrent cleanups in the
code that was already merged, should be easy to resolve:
* In the first Kconfig conflict, the MACH_MX3* options are not to be added
* In the Makefile conflict, keep the IMX6 statements that are in HEAD
* Last Kconfig change is just context difference due to the added
MIGHT_HAVE_CACHE_L2X0 option
Thanks!
-Olof
The following changes since commit 1ea6b8f48918282bdca0b32a34095504ee65bab5:
Linux 3.2-rc1 (2011-11-07 16:16:02 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git arm-soc-imx-move
for you to fetch changes up to 3f07f355704bc2ae26399f17c6d5d46c9a3d78d1:
ARM i.MX: Update defconfig (2011-11-16 08:37:53 +0100)
----------------------------------------------------------------
Consolidate i.MX 5 platforms to be under the new shared i.MX 3/5/6 tree.
----------------------------------------------------------------
Sascha Hauer (3):
ARM i.MX5: remove unnecessary includes from board files
ARM i.MX: Merge i.MX5 support into mach-imx
ARM i.MX: Update defconfig
arch/arm/Makefile | 1 -
.../configs/{mx5_defconfig => imx_v6_v7_defconfig} | 61 +++--
arch/arm/configs/mx3_defconfig | 144 ------------
arch/arm/mach-imx/Kconfig | 239 +++++++++++++++++++
arch/arm/mach-imx/Makefile | 21 ++
arch/arm/mach-imx/Makefile.boot | 12 +
arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c | 2 +-
arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h | 0
.../crm_regs.h => mach-imx/crm-regs-imx5.h} | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h | 0
arch/arm/{mach-mx5 => mach-imx}/efika.h | 0
arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} | 0
.../eukrea_mbimx51-baseboard.c | 0
.../eukrea_mbimxsd-baseboard.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c | 0
.../board-cpuimx51.c => mach-imx/mach-cpuimx51.c} | 0
.../mach-cpuimx51sd.c} | 0
.../board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} | 0
.../board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} | 0
.../mach-mx51_babbage.c} | 0
.../mach-mx51_efikamx.c} | 0
.../mach-mx51_efikasb.c} | 0
.../board-mx53_ard.c => mach-imx/mach-mx53_ard.c} | 1 -
.../board-mx53_evk.c => mach-imx/mach-mx53_evk.c} | 1 -
.../mach-mx53_loco.c} | 1 -
.../board-mx53_smd.c => mach-imx/mach-mx53_smd.c} | 1 -
arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c | 0
arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} | 89 +++++++-
arch/arm/mach-mx5/Kconfig | 244 --------------------
arch/arm/mach-mx5/Makefile | 26 --
arch/arm/mach-mx5/Makefile.boot | 9 -
arch/arm/mach-mx5/pm-imx5.c | 83 -------
arch/arm/plat-mxc/Kconfig | 15 +-
39 files changed, 391 insertions(+), 559 deletions(-)
rename arch/arm/configs/{mx5_defconfig => imx_v6_v7_defconfig} (80%)
delete mode 100644 arch/arm/configs/mx3_defconfig
rename arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c (99%)
rename arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h (100%)
rename arch/arm/{mach-mx5/crm_regs.h => mach-imx/crm-regs-imx5.h} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/efika.h (100%)
rename arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimx51-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimxsd-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c (100%)
rename arch/arm/{mach-mx5/board-cpuimx51.c => mach-imx/mach-cpuimx51.c} (100%)
rename arch/arm/{mach-mx5/board-cpuimx51sd.c => mach-imx/mach-cpuimx51sd.c} (100%)
rename arch/arm/{mach-mx5/board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_babbage.c => mach-imx/mach-mx51_babbage.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikamx.c => mach-imx/mach-mx51_efikamx.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikasb.c => mach-imx/mach-mx51_efikasb.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_ard.c => mach-imx/mach-mx53_ard.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_evk.c => mach-imx/mach-mx53_evk.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_loco.c => mach-imx/mach-mx53_loco.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_smd.c => mach-imx/mach-mx53_smd.c} (99%)
rename arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c (100%)
rename arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} (58%)
delete mode 100644 arch/arm/mach-mx5/Kconfig
delete mode 100644 arch/arm/mach-mx5/Makefile
delete mode 100644 arch/arm/mach-mx5/Makefile.boot
delete mode 100644 arch/arm/mach-mx5/pm-imx5.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3
2012-01-18 7:24 [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
2012-01-18 7:24 ` [GIT PULL 1/2] arm-soc: late driver changes Olof Johansson
2012-01-18 7:24 ` [GIT PULL 2/2] arm-soc: i.MX platform consolidation Olof Johansson
@ 2012-01-23 7:27 ` Olof Johansson
2 siblings, 0 replies; 4+ messages in thread
From: Olof Johansson @ 2012-01-23 7:27 UTC (permalink / raw)
To: torvalds; +Cc: linux-arm-kernel, linux-kernel, arnd, arm
Hi Linus,
On Tue, Jan 17, 2012 at 11:24:56PM -0800, Olof Johansson wrote:
> As mentioned with the first pull requests by Arnd, we had two sets of
> changes in arm-soc that were held until later in the merge window. One
> depended on external driver trees, and the other is a large code move
> that is best merged towards the end of the window. Here they are.
So, these two pull requests were two that did not get pulled before
the merge window closed. I'm hoping they were just on the missed list
instead of the too-much-work-to-check-them list.
In addition to this request to please still pull them, I have also
pushed a combined tag to the same repo with both branches merged on top
of v3.3-rc1, see below. Feel free to take that instead, or reference it
for conflict resolution.
For reference, the original individual pull requests were:
http://marc.info/?l=linux-kernel&m=132687170815781
http://marc.info/?l=linux-kernel&m=132687170915782
Thanks!
-Olof
The following changes since commit dcd6c92267155e70a94b3927bce681ce74b80d1f:
Linux 3.3-rc1 (2012-01-19 15:04:48 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git for-linus-late
for you to fetch changes up to 07425284b47742e18890a0df4348dd8eeb2f1316:
Merge tag 'arm-soc-imx-move' into for-linus-late (2012-01-22 23:06:06 -0800)
----------------------------------------------------------------
arm-soc: late merge combined tag
This is a tag that combines the two late arm-soc pulls for the 3.3 merge window:
* One branch with driver that had late-fulfilled dependencies on driver
trees that landed right at the end of the window
* One branch with a consolidation of the previously separate i.MX5
platform code to the new shared i.MX tree.
----------------------------------------------------------------
Arnd Bergmann (8):
Merge branch 'next-samsung-devel-dma' of git://git.kernel.org/.../kgene/linux-samsung into samsung/dma
Merge branches 'samsung/dt' and 'depends/dma-slave/next' into next/drivers2
Merge branch 'samsung/dma' into next/drivers2
Merge branch 'next-samsung-devel-rtc' of git://git.kernel.org/.../kgene/linux-samsung into samsung/rtc
Merge branch 'samsung/rtc' into next/drivers2
Merge branch 'samsung/driver' into next/drivers3
Merge branch 'for-arnd-3.3-device_boardV3' of git://github.com/at91linux/linux-at91 into at91/board
Merge branch 'at91/board' into next/drivers3
Boojin Kim (5):
DMA: PL330: Merge PL330 driver into drivers/dma/
DMA: PL330: Removes useless function
DMA: PL330: Support MEMTOMEM transmit w/o RMB, WMB
ARM: EXYNOS: Enable MDMA driver
ARM: EXYNOS: Support DMA for EXYNOS4X12 SoCs
Heiko Stuebner (4):
ARM: SAMSUNG: cleanup of rtc register definitions
rtc-s3c: make room for more variants in devicetree block
rtc-s3c: add variants for S3C2443 and S3C2416
ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices
Hong Xu (1):
ARM: at91: Update struct atmel_nand_data to support PMECC
Josh Wu (2):
ARM: at91: add clock selection parameter for at91_add_device_isi()
ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board
Kukjin Kim (1):
Merge branch 'next-samsung-devel-dt1' into for-vkoul-samsung-dma
Nicolas Ferre (2):
ARM: at91/dma: remove platform data from DMA controller
ARM: at91/dma: DMA controller registering with DT support
Olof Johansson (2):
Merge tag 'arm-soc-drivers-late' into for-linus-late
Merge tag 'arm-soc-imx-move' into for-linus-late
Sascha Hauer (3):
ARM i.MX5: remove unnecessary includes from board files
ARM i.MX: Merge i.MX5 support into mach-imx
ARM i.MX: Update defconfig
Tushar Behera (1):
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
arch/arm/Makefile | 1 -
arch/arm/common/Kconfig | 3 -
arch/arm/common/Makefile | 1 -
arch/arm/common/pl330.c | 1959 --------------------
.../configs/{mx5_defconfig => imx_v6_v7_defconfig} | 61 +-
arch/arm/configs/mx3_defconfig | 144 --
arch/arm/include/asm/hardware/pl330.h | 338 ++--
arch/arm/mach-at91/at91sam9263_devices.c | 13 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 113 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 8 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 80 +-
arch/arm/mach-at91/include/mach/board.h | 6 +-
arch/arm/mach-exynos/clock.c | 9 +
arch/arm/mach-exynos/dma.c | 130 ++-
arch/arm/mach-exynos/include/mach/irqs.h | 2 +
arch/arm/mach-exynos/include/mach/map.h | 3 +-
arch/arm/mach-imx/Kconfig | 239 +++
arch/arm/mach-imx/Makefile | 22 +
arch/arm/mach-imx/Makefile.boot | 12 +
arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c | 2 +-
arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h | 0
.../crm_regs.h => mach-imx/crm-regs-imx5.h} | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h | 0
arch/arm/{mach-mx5 => mach-imx}/efika.h | 0
arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} | 0
.../eukrea_mbimx51-baseboard.c | 0
.../eukrea_mbimxsd-baseboard.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c | 0
.../board-cpuimx51.c => mach-imx/mach-cpuimx51.c} | 0
.../mach-cpuimx51sd.c} | 0
.../board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} | 0
.../board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} | 0
.../mach-mx51_babbage.c} | 0
.../mach-mx51_efikamx.c} | 0
.../mach-mx51_efikasb.c} | 0
.../board-mx53_ard.c => mach-imx/mach-mx53_ard.c} | 1 -
.../board-mx53_evk.c => mach-imx/mach-mx53_evk.c} | 1 -
.../mach-mx53_loco.c} | 1 -
.../board-mx53_smd.c => mach-imx/mach-mx53_smd.c} | 1 -
arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c | 0
arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} | 89 +-
arch/arm/mach-mx5/Kconfig | 244 ---
arch/arm/mach-mx5/Makefile | 26 -
arch/arm/mach-mx5/Makefile.boot | 9 -
arch/arm/mach-mx5/pm-imx5.c | 83 -
arch/arm/mach-s3c2416/s3c2416.c | 2 +
arch/arm/mach-s3c2443/s3c2443.c | 2 +
arch/arm/plat-mxc/Kconfig | 15 +-
arch/arm/plat-samsung/include/plat/dma-pl330.h | 16 +
arch/arm/plat-samsung/include/plat/regs-rtc.h | 81 +-
arch/arm/plat-samsung/include/plat/rtc-core.h | 27 +
drivers/dma/Kconfig | 1 -
drivers/dma/pl330.c | 1850 ++++++++++++++++++
drivers/rtc/rtc-s3c.c | 71 +-
60 files changed, 2909 insertions(+), 2757 deletions(-)
delete mode 100644 arch/arm/common/pl330.c
rename arch/arm/configs/{mx5_defconfig => imx_v6_v7_defconfig} (80%)
delete mode 100644 arch/arm/configs/mx3_defconfig
rename arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c (99%)
rename arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h (100%)
rename arch/arm/{mach-mx5/crm_regs.h => mach-imx/crm-regs-imx5.h} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/efika.h (100%)
rename arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimx51-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimxsd-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c (100%)
rename arch/arm/{mach-mx5/board-cpuimx51.c => mach-imx/mach-cpuimx51.c} (100%)
rename arch/arm/{mach-mx5/board-cpuimx51sd.c => mach-imx/mach-cpuimx51sd.c} (100%)
rename arch/arm/{mach-mx5/board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_babbage.c => mach-imx/mach-mx51_babbage.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikamx.c => mach-imx/mach-mx51_efikamx.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikasb.c => mach-imx/mach-mx51_efikasb.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_ard.c => mach-imx/mach-mx53_ard.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_evk.c => mach-imx/mach-mx53_evk.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_loco.c => mach-imx/mach-mx53_loco.c} (99%)
rename arch/arm/{mach-mx5/board-mx53_smd.c => mach-imx/mach-mx53_smd.c} (99%)
rename arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c (100%)
rename arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} (58%)
delete mode 100644 arch/arm/mach-mx5/Kconfig
delete mode 100644 arch/arm/mach-mx5/Makefile
delete mode 100644 arch/arm/mach-mx5/Makefile.boot
delete mode 100644 arch/arm/mach-mx5/pm-imx5.c
create mode 100644 arch/arm/plat-samsung/include/plat/rtc-core.h
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-01-23 7:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-18 7:24 [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
2012-01-18 7:24 ` [GIT PULL 1/2] arm-soc: late driver changes Olof Johansson
2012-01-18 7:24 ` [GIT PULL 2/2] arm-soc: i.MX platform consolidation Olof Johansson
2012-01-23 7:27 ` [GIT PULL 0/2] Last batch of arm-soc merge window contents for 3.3 Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).