[PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

This series simplifies the architecture code for handling signals by
making use of set_current_blocked() introduced in e6fa16ab ("signal:
sigprocmask() should do retarget_shared_pending()") and
block_sigmask() introduced in commit 5e6292c0f28f ("signal: add
block_sigmask() for adding sigmask to current->blocked").

A number of architectures have bugs in this code. Using the helper
functions should avoid this problem in the future.

Note that I've only been able to compile test the following,

	- alpha
	- arm
	- m68k
	- mips
	- powerpc
	- s390
	- sh

and that I don't have the hardware to test any of these patches.

Unlike the previous versions of this series, these patches can be
taken through the arch maintainer's trees because the requisite patch
("signal: add block_sigmask() for adding sigmask to current->blocked")
went into v3.3-rc1.

Matt Fleming (39):
  alpha: Use set_current_blocked() and block_sigmask()
  arm: Use set_current_blocked() and block_sigmask()
  avr32: Don't mask signals in the error path
  avr32: Use block_sigmask()
  blackfin: Use set_current_blocked() and block_sigmask()
  C6X: Use set_current_blocked() and block_sigmask()
  cris: Use set_current_blocked() and block_sigmask()
  frv: Use set_current_blocked() and block_sigmask()
  h8300: Use set_current_blocked() and block_sigmask()
  Hexagon: Use set_current_blocked() and block_sigmask()
  ia64: Use set_current_blocked() and block_sigmask()
  m32r: Use set_current_blocked() and block_sigmask()
  m68k: Use set_current_blocked() and block_sigmask()
  microblaze: Don't reimplement force_sigsegv()
  microblaze: No need to reset handler if SA_ONESHOT
  microblaze: Fix signal masking
  microblaze: Use set_current_blocked() and block_sigmask()
  MIPS: Use set_current_blocked() and block_sigmask()
  mn10300: Use set_current_blocked() and block_sigmask()
  OpenRISC: Don't reimplement force_sigsegv()
  OpenRISC: No need to reset handler if SA_ONESHOT
  OpenRISC: Don't mask signals if we fail to setup signal stack
  OpenRISC: Use set_current_blocked() and block_sigmask()
  parisc: Use set_current_blocked() and block_sigmask()
  powerpc: Use set_current_blocked() and block_sigmask()
  [S390] Use block_sigmask()
  score: Don't mask signals if we fail to setup signal stack
  score: Use set_current_blocked() and block_sigmask()
  sh: No need to reset handler if SA_ONESHOT
  sh: Use set_current_blocked() and block_sigmask()
  sparc: Use block_sigmask()
  tile: Use set_current_blocked() and block_sigmask()
  um: Don't restore current->blocked on error
  um: Use set_current_blocked() and block_sigmask()
  unicore32: Use block_sigmask()
  xtensa: Don't reimplement force_sigsegv()
  xtensa: No need to reset handler if SA_ONESHOT
  xtensa: Don't mask signals if we fail to setup signal stack
  xtensa: Use set_current_blocked() and block_sigmask()

Oleg Nesterov (1):
  avr32: use set_current_blocked() in handle_signal/sys_rt_sigreturn

 arch/alpha/kernel/signal.c         |   31 ++++++++----------------
 arch/arm/kernel/signal.c           |   24 ++++++------------
 arch/avr32/kernel/signal.c         |   26 ++++++--------------
 arch/blackfin/kernel/signal.c      |   17 +++----------
 arch/c6x/kernel/signal.c           |   16 ++----------
 arch/cris/arch-v10/kernel/signal.c |   34 +++++++++-----------------
 arch/cris/arch-v32/kernel/signal.c |   37 ++++++++--------------------
 arch/frv/kernel/signal.c           |   32 ++++++++-----------------
 arch/h8300/kernel/signal.c         |   33 +++++++-------------------
 arch/hexagon/kernel/signal.c       |   12 +--------
 arch/ia64/kernel/signal.c          |   15 +----------
 arch/m32r/kernel/signal.c          |   12 +--------
 arch/m68k/kernel/signal_mm.c       |   22 +++++++----------
 arch/m68k/kernel/signal_no.c       |   28 +++++++---------------
 arch/microblaze/kernel/signal.c    |   42 +++++++++++++--------------------
 arch/mips/kernel/signal.c          |   27 ++++-----------------
 arch/mips/kernel/signal32.c        |   20 +++------------
 arch/mips/kernel/signal_n32.c      |   10 +------
 arch/mn10300/kernel/signal.c       |   32 ++++++++-----------------
 arch/openrisc/kernel/signal.c      |   45 +++++++++++++++--------------------
 arch/parisc/kernel/signal.c        |   12 +--------
 arch/powerpc/kernel/signal.c       |   13 +--------
 arch/powerpc/kernel/signal_32.c    |   11 ++++----
 arch/s390/kernel/compat_signal.c   |    6 +----
 arch/s390/kernel/signal.c          |    6 +----
 arch/score/kernel/signal.c         |   13 ++--------
 arch/sh/kernel/signal_32.c         |   35 ++++++++--------------------
 arch/sh/kernel/signal_64.c         |   40 ++++++++------------------------
 arch/sparc/kernel/signal32.c       |    7 +----
 arch/sparc/kernel/signal_32.c      |    7 +----
 arch/sparc/kernel/signal_64.c      |    6 +----
 arch/tile/kernel/compat_signal.c   |    5 +---
 arch/tile/kernel/signal.c          |   13 +--------
 arch/um/kernel/signal.c            |   26 +++++---------------
 arch/unicore32/kernel/signal.c     |    5 +---
 arch/xtensa/kernel/signal.c        |   35 ++++++++-------------------
 36 files changed, 216 insertions(+), 539 deletions(-)

-- 
1.7.4.4

[PATCH 01/40] alpha: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check for shared signals we're about to block.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/alpha/kernel/signal.c |   31 ++++++++++---------------------
 1 files changed, 10 insertions(+), 21 deletions(-)

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 6f7feb5..35f2ef4 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -120,12 +120,13 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
  */
 SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -238,10 +239,7 @@ do_sigreturn(struct sigcontext __user *sc, struct pt_regs *regs,
 		goto give_sigsegv;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(sc, regs, sw))
 		goto give_sigsegv;
@@ -276,10 +274,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame, struct pt_regs *regs,
 		goto give_sigsegv;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(&frame->uc.uc_mcontext, regs, sw))
 		goto give_sigsegv;
@@ -501,14 +496,8 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
 	else
 		ret = setup_frame(sig, ka, oldset, regs, sw);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER)) 
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 02/40] arm: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check for shared signals we're about to block.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/arm/kernel/signal.c |   24 ++++++++----------------
 1 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 9e617bd..7cb532f 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -66,12 +66,13 @@ const unsigned long syscall_restart_code[2] = {
  */
 asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -280,10 +281,7 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
 	if (err == 0) {
 		sigdelsetmask(&set, ~_BLOCKABLE);
-		spin_lock_irq(&current->sighand->siglock);
-		current->blocked = set;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+		set_current_blocked(&set);
 	}
 
 	__get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
@@ -636,13 +634,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	/*
 	 * Block the signal if we were successful.
 	 */
-	spin_lock_irq(&tsk->sighand->siglock);
-	sigorsets(&tsk->blocked, &tsk->blocked,
-		  &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&tsk->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&tsk->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
-- 
1.7.4.4

[PATCH 03/40] avr32: Don't mask signals in the error path

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

The current handle_signal() implementation is broken - it will mask
signals if we fail to setup the signal stack frame, which isn't the
desired behaviour, we should only be masking signals if we succeed in
setting up the stack frame. It looks like this code was copied from
the old (broken) arm implementation but wasn't updated when the arm
code was fixed in commit a6c61e9dfdd0 ("[ARM] 3168/1: Update ARM
signal delivery and masking").

Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/avr32/kernel/signal.c |   25 ++++++++++++-------------
 1 files changed, 12 insertions(+), 13 deletions(-)

diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 64f886f..9c075e1 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -238,22 +238,21 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	 */
 	ret |= !valid_user_regs(regs);
 
+	if (ret != 0) {
+		force_sigsegv(sig, current);
+		return;
+	}
+
 	/*
-	 * Block the signal if we were unsuccessful.
+	 * Block the signal if we were successful.
 	 */
-	if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked,
+		  &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
 		sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-
-	if (ret == 0)
-		return;
-
-	force_sigsegv(sig, current);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
 }
 
 /*
-- 
1.7.4.4

[PATCH 04/40] avr32: use set_current_blocked() in handle_signal/sys_rt_sigreturn

[Matt Fleming]

From: Oleg Nesterov <oleg@redhat.com>

It is wrong to change ->blocked directly, see e6fa16ab.
Change  handle_signal() and sys_rt_sigreturn() to use
the right helper, set_current_blocked().

Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
 arch/avr32/kernel/signal.c |   15 +++++----------
 1 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 9c075e1..06f4293 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -87,10 +87,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -226,6 +223,7 @@ static inline void
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs, int syscall)
 {
+	sigset_t blocked;
 	int ret;
 
 	/*
@@ -246,13 +244,10 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	/*
 	 * Block the signal if we were successful.
 	 */
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked,
-		  &ka->sa.sa_mask);
+	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+		sigaddset(&blocked, sig);
+	set_current_blocked(&blocked);
 }
 
 /*
-- 
1.7.4.4

[PATCH 05/40] avr32: Use block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures.

In the past some architectures got this code wrong, so using this
helper function should stop that from happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/avr32/kernel/signal.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 06f4293..feeb77b 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -223,7 +223,6 @@ static inline void
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs, int syscall)
 {
-	sigset_t blocked;
 	int ret;
 
 	/*
@@ -244,10 +243,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	/*
 	 * Block the signal if we were successful.
 	 */
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&blocked, sig);
-	set_current_blocked(&blocked);
+	block_sigmask(ka, sig);
 }
 
 /*
-- 
1.7.4.4

[PATCH 06/40] blackfin: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/blackfin/kernel/signal.c |   17 ++++-------------
 1 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index d536f35..05ece02 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -99,10 +99,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
 		goto badframe;
@@ -266,15 +263,9 @@ handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
 	/* set up the stack frame */
 	ret = setup_rt_frame(sig, ka, info, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
+
 	return ret;
 }
 
-- 
1.7.4.4

[PATCH 07/40] C6X: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/c6x/kernel/signal.c |   16 +++-------------
 1 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/c6x/kernel/signal.c b/arch/c6x/kernel/signal.c
index 304f675..3b5a050 100644
--- a/arch/c6x/kernel/signal.c
+++ b/arch/c6x/kernel/signal.c
@@ -85,10 +85,7 @@ asmlinkage int do_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -279,15 +276,8 @@ static int handle_signal(int sig,
 
 	/* Set up the stack frame */
 	ret = setup_rt_frame(sig, ka, info, oldset, regs);
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 08/40] cris: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/cris/arch-v10/kernel/signal.c |   34 +++++++++++---------------------
 arch/cris/arch-v32/kernel/signal.c |   37 ++++++++++-------------------------
 2 files changed, 23 insertions(+), 48 deletions(-)

diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
index e78fe49..a6e1ff0 100644
--- a/arch/cris/arch-v10/kernel/signal.c
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -50,12 +50,14 @@ void do_signal(int canrestart, struct pt_regs *regs);
 int sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
 	long srp, struct pt_regs *regs)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
+
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
@@ -184,10 +186,7 @@ asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc))
 		goto badframe;
@@ -223,10 +222,7 @@ asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -468,15 +464,9 @@ static inline int handle_signal(int canrestart, unsigned long sig,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
+
 	return ret;
 }
 
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index ce4ab1a..e7ea1ea 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -62,12 +62,14 @@ int
 sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
 	       long srp, struct pt_regs *regs)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
+
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
@@ -176,12 +178,7 @@ sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-
-	current->blocked = set;
-
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc))
 		goto badframe;
@@ -222,12 +219,7 @@ sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-
-	current->blocked = set;
-
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -515,15 +507,8 @@ handle_signal(int canrestart, unsigned long sig,
 	if (ka->sa.sa_flags & SA_ONESHOT)
 		ka->sa.sa_handler = SIG_DFL;
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 09/40] frv: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/frv/kernel/signal.c |   32 ++++++++++----------------------
 1 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index bab0129..dfa460e 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -40,12 +40,13 @@ struct fdpic_func_descriptor {
  */
 asmlinkage int sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -158,10 +159,7 @@ asmlinkage int sys_sigreturn(void)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(&frame->sc, &gr8))
 		goto badframe;
@@ -184,10 +182,7 @@ asmlinkage int sys_rt_sigreturn(void)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(&frame->uc.uc_mcontext, &gr8))
 		goto badframe;
@@ -474,15 +469,8 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	else
 		ret = setup_frame(sig, ka, oldset);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 
-- 
1.7.4.4

[PATCH 10/40] h8300: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/h8300/kernel/signal.c |   33 +++++++++------------------------
 1 files changed, 9 insertions(+), 24 deletions(-)

diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index af842c3..cd63f5a 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -57,14 +57,13 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
 asmlinkage int do_sigsuspend(struct pt_regs *regs)
 {
 	old_sigset_t mask = regs->er3;
-	sigset_t saveset;
+	sigset_t saveset, blocked;
 
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
 	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	regs->er0 = -EINTR;
 	while (1) {
@@ -90,11 +89,8 @@ do_rt_sigsuspend(struct pt_regs *regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	regs->er0 = -EINTR;
 	while (1) {
@@ -232,10 +228,7 @@ asmlinkage int do_sigreturn(unsigned long __unused,...)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 	
 	if (restore_sigcontext(regs, &frame->sc, &er0))
 		goto badframe;
@@ -260,10 +253,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused,...)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_unlock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_lock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 	
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &er0))
 		goto badframe;
@@ -489,12 +479,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	else
 		setup_frame(sig, ka, oldset, regs);
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 }
 
 /*
-- 
1.7.4.4

[PATCH 11/40] Hexagon: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/hexagon/kernel/signal.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/hexagon/kernel/signal.c b/arch/hexagon/kernel/signal.c
index b45be31..ecbab34 100644
--- a/arch/hexagon/kernel/signal.c
+++ b/arch/hexagon/kernel/signal.c
@@ -192,12 +192,7 @@ static int handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
 	if (rc)
 		return rc;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
@@ -305,10 +300,7 @@ asmlinkage int sys_rt_sigreturn(void)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
-- 
1.7.4.4

[PATCH 12/40] ia64: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/ia64/kernel/signal.c |   15 ++-------------
 1 files changed, 2 insertions(+), 13 deletions(-)

diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 7bdafc8..7523501 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -201,13 +201,7 @@ ia64_rt_sigreturn (struct sigscratch *scr)
 		goto give_sigsegv;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	{
-		current->blocked = set;
-		recalc_sigpending();
-	}
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(sc, scr))
 		goto give_sigsegv;
@@ -427,12 +421,7 @@ handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigse
 	if (!setup_frame(sig, ka, info, oldset, scr))
 		return 0;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	/*
 	 * Let tracing know that we've done the handler setup.
-- 
1.7.4.4

[PATCH 13/40] m32r: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: linux-m32r@ml.linux-m32r.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/m32r/kernel/signal.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index a08697f..f54d969 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -112,10 +112,7 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result))
 		goto badframe;
@@ -300,12 +297,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	if (setup_rt_frame(sig, ka, info, oldset, regs))
 		return -EFAULT;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 	return 0;
 }
 
-- 
1.7.4.4

[PATCH 14/40] m68k: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
CC: linux-m68k@lists.linux-m68k.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/m68k/kernel/signal_mm.c |   22 +++++++++-------------
 arch/m68k/kernel/signal_no.c |   28 +++++++++-------------------
 2 files changed, 18 insertions(+), 32 deletions(-)

diff --git a/arch/m68k/kernel/signal_mm.c b/arch/m68k/kernel/signal_mm.c
index cb856f9..93208b8 100644
--- a/arch/m68k/kernel/signal_mm.c
+++ b/arch/m68k/kernel/signal_mm.c
@@ -105,12 +105,13 @@ int handle_kernel_fault(struct pt_regs *regs)
 asmlinkage int
 sys_sigsuspend(int unused0, int unused1, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -528,8 +529,7 @@ asmlinkage int do_sigreturn(unsigned long __unused)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	current->blocked = set;
-	recalc_sigpending();
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc, frame + 1))
 		goto badframe;
@@ -554,8 +554,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	current->blocked = set;
-	recalc_sigpending();
+	set_current_blocked(&set);
 
 	if (rt_restore_ucontext(regs, sw, &frame->uc))
 		goto badframe;
@@ -1063,10 +1062,7 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		return;
 
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
+	block_sigmask(ka, sig);
 
 	if (test_thread_flag(TIF_DELAYED_TRACE)) {
 		regs->sr &= ~0x8000;
diff --git a/arch/m68k/kernel/signal_no.c b/arch/m68k/kernel/signal_no.c
index 36a81bb..33e8bf5 100644
--- a/arch/m68k/kernel/signal_no.c
+++ b/arch/m68k/kernel/signal_no.c
@@ -60,12 +60,13 @@ void ret_from_user_rt_signal(void);
 asmlinkage int
 sys_sigsuspend(int unused0, int unused1, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -343,10 +344,7 @@ asmlinkage int do_sigreturn(unsigned long __unused)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 	
 	if (restore_sigcontext(regs, &frame->sc, frame + 1, &d0))
 		goto badframe;
@@ -372,10 +370,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 	
 	if (rt_restore_ucontext(regs, sw, &frame->uc, &d0))
 		goto badframe;
@@ -708,12 +703,7 @@ handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		return;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	clear_thread_flag(TIF_RESTORE_SIGMASK);
 }
-- 
1.7.4.4

[PATCH 15/40] microblaze: Don't reimplement force_sigsegv()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Instead of open coding the sequence from force_sigsegv() just call
it. This also fixes a bug because we were modifying ka->sa.sa_handler
(which is a copy of sighand->action[]), whereas the intention of the
code was to modify sighand->action[] directly.

As the original code was working with a copy it had no effect on
signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/microblaze/kernel/signal.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 5996711..90de06d 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -270,9 +270,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return;
 
 give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 }
 
 /* Handle restarting system calls */
-- 
1.7.4.4

[PATCH 16/40] microblaze: No need to reset handler if SA_ONESHOT

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

get_signal_to_deliver() already resets the signal handler if
SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again
in handle_signal(). Furthermore, because we were modifying
ka->sa.sa_handler (which is a copy of sighand->action[]) instead of
sighand->action[] the original code actually had no effect on signal
delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/microblaze/kernel/signal.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 90de06d..9e749c0 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -320,9 +320,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	else
 		setup_rt_frame(sig, ka, NULL, oldset, regs);
 
-	if (ka->sa.sa_flags & SA_ONESHOT)
-		ka->sa.sa_handler = SIG_DFL;
-
 	if (!(ka->sa.sa_flags & SA_NODEFER)) {
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked,
-- 
1.7.4.4

[PATCH 17/40] microblaze: Fix signal masking

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

There are a couple of problems with the current signal code,

1. If we failed to setup the signal stack frame then we
should not be masking any signals.

2. ka->sa.sa_mask is only added to the current blocked signals list if
SA_NODEFER is set in ka->sa.sa_flags. If we successfully setup the
signal frame and are going to run the handler then we must honour
sa_mask.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/microblaze/kernel/signal.c |   31 ++++++++++++++++++-------------
 1 files changed, 18 insertions(+), 13 deletions(-)

diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 9e749c0..f2c13d5 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -169,7 +169,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	return (void __user *)((sp - frame_size) & -8UL);
 }
 
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
@@ -267,10 +267,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		current->comm, current->pid, frame, regs->pc);
 #endif
 
-	return;
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
 /* Handle restarting system calls */
@@ -314,21 +315,25 @@ static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
+	int ret;
+
 	/* Set up the stack frame */
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
+		ret = setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		setup_rt_frame(sig, ka, NULL, oldset, regs);
+		ret = setup_rt_frame(sig, ka, NULL, oldset, regs);
+
+	if (ret)
+		return ret;
 
-	if (!(ka->sa.sa_flags & SA_NODEFER)) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,
-				&current->blocked, &ka->sa.sa_mask);
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
 		sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-	return 1;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	return 0;
 }
 
 /*
@@ -369,7 +374,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 		/* Whee! Actually deliver the signal. */
 		if (in_syscall)
 			handle_restart(regs, &ka, 1);
-		if (handle_signal(signr, &ka, &info, oldset, regs)) {
+		if (!handle_signal(signr, &ka, &info, oldset, regs)) {
 			/*
 			 * A signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
-- 
1.7.4.4

[PATCH 18/40] microblaze: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/microblaze/kernel/signal.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index f2c13d5..99b9708 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -105,10 +105,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
 		goto badframe;
@@ -326,12 +323,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
-- 
1.7.4.4

[PATCH 19/40] MIPS: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/mips/kernel/signal.c     |   27 +++++----------------------
 arch/mips/kernel/signal32.c   |   20 ++++----------------
 arch/mips/kernel/signal_n32.c |   10 ++--------
 3 files changed, 11 insertions(+), 46 deletions(-)

diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index f852400..76084cc 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -256,11 +256,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -285,11 +282,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -361,10 +355,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -400,10 +391,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -579,12 +567,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return ret;
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index aae9866..902a889 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext32(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index ee24d81..30fc7ff 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -94,11 +94,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigset_from_compat(&newset, &uset);
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -122,10 +119,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
-- 
1.7.4.4

[PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-am33-list@redhat.com
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/mn10300/kernel/signal.c |   32 ++++++++++----------------------
 1 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 690f4e9..bd77c6d 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -38,12 +38,13 @@
  */
 asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -172,10 +173,7 @@ asmlinkage long sys_sigreturn(void)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(current_frame(), &frame->sc, &d0))
 		goto badframe;
@@ -203,10 +201,7 @@ asmlinkage long sys_rt_sigreturn(void)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(current_frame(), &frame->uc.uc_mcontext, &d0))
 		goto badframe;
@@ -476,15 +471,8 @@ static int handle_signal(int sig,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 21/40] OpenRISC: Don't reimplement force_sigsegv()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Instead of open coding the sequence from force_sigsegv() just call
it. This also fixes a bug because we were modifying ka->sa.sa_handler
(which is a copy of sighand->action[]), whereas the intention of the
code was to modify sighand->action[] directly.

As the original code was working with a copy it had no effect on
signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/openrisc/kernel/signal.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 95207ab..53741ba 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -250,9 +250,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return;
 
 give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 }
 
 static inline void
-- 
1.7.4.4

[PATCH 22/40] OpenRISC: No need to reset handler if SA_ONESHOT

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

get_signal_to_deliver() already resets the signal handler if
SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again
in handle_signal(). Furthermore, because we were modifying
ka->sa.sa_handler (which is a copy of sighand->action[]) instead of
sighand->action[] the original code actually had no effect on signal
delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/openrisc/kernel/signal.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 53741ba..92d2218 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -260,9 +260,6 @@ handle_signal(unsigned long sig,
 {
 	setup_rt_frame(sig, ka, info, oldset, regs);
 
-	if (ka->sa.sa_flags & SA_ONESHOT)
-		ka->sa.sa_handler = SIG_DFL;
-
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NODEFER))
-- 
1.7.4.4

[PATCH 23/40] OpenRISC: Don't mask signals if we fail to setup signal stack

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

setup_rt_frame() needs to return an indication of whether it succeeded
or failed in setting up the signal stack frame. If setup_rt_frame()
fails then we must not modify current->blocked.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/openrisc/kernel/signal.c |   29 ++++++++++++++++++-----------
 1 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 92d2218..14764e8 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -189,8 +189,8 @@ static inline void __user *get_sigframe(struct k_sigaction *ka,
  * trampoline which performs the syscall sigreturn, or a provided
  * user-mode trampoline.
  */
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs *regs)
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe *frame;
 	unsigned long return_ip;
@@ -247,18 +247,23 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* actually move the usp to reflect the stacked frame */
 	regs->sp = (unsigned long)frame;
 
-	return;
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
-static inline void
+static inline int
 handle_signal(unsigned long sig,
 	      siginfo_t *info, struct k_sigaction *ka,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
-	setup_rt_frame(sig, ka, info, oldset, regs);
+	int ret;
+
+	ret = setup_rt_frame(sig, ka, info, oldset, regs);
+	if (ret)
+		return ret;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
@@ -267,6 +272,8 @@ handle_signal(unsigned long sig,
 	recalc_sigpending();
 
 	spin_unlock_irq(&current->sighand->siglock);
+
+	return 0;
 }
 
 /*
@@ -355,13 +362,13 @@ void do_signal(struct pt_regs *regs)
 			oldset = &current->blocked;
 
 		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
-		/* a signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TIF_RESTORE_SIGMASK flag */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		if (!handle_signal(signr, &info, &ka, oldset, regs)) {
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag */
 			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 
 		tracehook_signal_handler(signr, &info, &ka, regs,
 					 test_thread_flag(TIF_SINGLESTEP));
-- 
1.7.4.4

[PATCH 24/40] OpenRISC: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/openrisc/kernel/signal.c |   13 ++-----------
 1 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 14764e8..cf35ea0 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -102,10 +102,7 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -265,13 +262,7 @@ handle_signal(unsigned long sig,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
-- 
1.7.4.4

[PATCH 25/40] parisc: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/parisc/kernel/signal.c |   12 ++----------
 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 12c1ed3..bd36152 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -131,10 +131,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	}
 		
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	/* Good thing we saved the old gr[30], eh? */
 #ifdef CONFIG_64BIT
@@ -454,12 +451,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	if (!setup_rt_frame(sig, ka, info, oldset, regs, in_syscall))
 		return 0;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	tracehook_signal_handler(sig, info, ka, regs, 
 		test_thread_flag(TIF_SINGLESTEP) ||
-- 
1.7.4.4

[PATCH 26/40] powerpc: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/powerpc/kernel/signal.c    |   13 ++-----------
 arch/powerpc/kernel/signal_32.c |   11 ++++++-----
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 2300426..3867f7b 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -56,10 +56,7 @@ void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 void restore_sigmask(sigset_t *set)
 {
 	sigdelsetmask(set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = *set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(set);
 }
 
 static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
@@ -167,13 +164,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 
 	regs->trap = 0;
 	if (ret) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka.sa.sa_mask);
-		if (!(ka.sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, signr);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+		block_sigmask(&ka, signr);
 
 		/*
 		 * A signal was successfully delivered; the saved sigmask is in
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 836a5a1..e061ef5 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -242,12 +242,13 @@ static inline int restore_general_regs(struct pt_regs *regs,
  */
 long sys_sigsuspend(old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
  	current->state = TASK_INTERRUPTIBLE;
  	schedule();
-- 
1.7.4.4

[PATCH 27/40] [S390] Use block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures.

In the past some architectures got this code wrong, so using this
helper function should stop that from happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/s390/kernel/compat_signal.c |    6 +-----
 arch/s390/kernel/signal.c        |    6 +-----
 2 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 6fe78c2..53a82c8 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -581,7 +581,6 @@ give_sigsegv:
 int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 		    siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
-	sigset_t blocked;
 	int ret;
 
 	/* Set up the stack frame */
@@ -591,10 +590,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 		ret = setup_frame32(sig, ka, oldset, regs);
 	if (ret)
 		return ret;
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&blocked, sig);
-	set_current_blocked(&blocked);
+	block_sigmask(ka, sig);
 	return 0;
 }
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index a8ba840..c4f5790 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -385,7 +385,6 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
 			 siginfo_t *info, sigset_t *oldset,
 			 struct pt_regs *regs)
 {
-	sigset_t blocked;
 	int ret;
 
 	/* Set up the stack frame */
@@ -395,10 +394,7 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
 		ret = setup_frame(sig, ka, oldset, regs);
 	if (ret)
 		return ret;
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&blocked, sig);
-	set_current_blocked(&blocked);
+	block_sigmask(ka, sig);
 	return 0;
 }
 
-- 
1.7.4.4

[PATCH 28/40] score: Don't mask signals if we fail to setup signal stack

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

If setup_rt_frame() returns -EFAULT then we must not block any signals
in the current process.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/score/kernel/signal.c |   14 ++++++++------
 1 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index aa57440..bf9e33e 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -272,12 +272,14 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	 */
 	ret = setup_rt_frame(ka, regs, sig, oldset, info);
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	if (ret == 0) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+		if (!(ka->sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked, sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 29/40] score: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/score/kernel/signal.c |   15 +++------------
 1 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index bf9e33e..5a5bd17 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -159,10 +159,7 @@ score_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -272,14 +269,8 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	 */
 	ret = setup_rt_frame(ka, regs, sig, oldset, info);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 30/40] sh: No need to reset handler if SA_ONESHOT

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

get_signal_to_deliver() already resets the signal handler if
SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again
in handle_signal(). Furthermore, because we were modifying
ka->sa.sa_handler (which is a copy of sighand->action[]) instead of
sighand->action[] the original code had no effect on signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/sh/kernel/signal_32.c |    3 ---
 arch/sh/kernel/signal_64.c |    3 ---
 2 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index a7a55ed..1055146 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -548,9 +548,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ka->sa.sa_flags & SA_ONESHOT)
-		ka->sa.sa_handler = SIG_DFL;
-
 	if (ret == 0) {
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 6b5603f..7b9278d 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -734,9 +734,6 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ka->sa.sa_flags & SA_ONESHOT)
-		ka->sa.sa_handler = SIG_DFL;
-
 	if (ret == 0) {
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-- 
1.7.4.4

[PATCH 31/40] sh: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/sh/kernel/signal_32.c |   32 ++++++++++----------------------
 arch/sh/kernel/signal_64.c |   37 ++++++++++---------------------------
 2 files changed, 20 insertions(+), 49 deletions(-)

diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 1055146..883d711 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -58,12 +58,13 @@ sys_sigsuspend(old_sigset_t mask,
 	       unsigned long r5, unsigned long r6, unsigned long r7,
 	       struct pt_regs __regs)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -240,11 +241,7 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc, &r0))
 		goto badframe;
@@ -274,10 +271,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
 		goto badframe;
@@ -548,14 +542,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 7b9278d..3c9a6f7 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -159,14 +159,13 @@ sys_sigsuspend(old_sigset_t mask,
 	       unsigned long r6, unsigned long r7,
 	       struct pt_regs * regs)
 {
-	sigset_t saveset;
+	sigset_t saveset, blocked;
 
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
 	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	REF_REG_RET = -EINTR;
 	while (1) {
@@ -198,11 +197,8 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
 	if (copy_from_user(&newset, unewset, sizeof(newset)))
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
 	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	REF_REG_RET = -EINTR;
 	while (1) {
@@ -408,11 +404,7 @@ asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc, &ret))
 		goto badframe;
@@ -445,10 +437,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret))
 		goto badframe;
@@ -734,14 +723,8 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret == 0)
+		block_sigmask(ka, sig);
 
 	return ret;
 }
-- 
1.7.4.4

[PATCH 32/40] sparc: Use block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/sparc/kernel/signal32.c  |    7 +------
 arch/sparc/kernel/signal_32.c |    7 +------
 arch/sparc/kernel/signal_64.c |    6 +-----
 3 files changed, 3 insertions(+), 17 deletions(-)

diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 023b886..c8f5b50 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -776,7 +776,6 @@ static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka,
 				  siginfo_t *info,
 				  sigset_t *oldset, struct pt_regs *regs)
 {
-	sigset_t blocked;
 	int err;
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
@@ -787,11 +786,7 @@ static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka,
 	if (err)
 		return err;
 
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NOMASK))
-		sigaddset(&blocked, signr);
-	set_current_blocked(&blocked);
-
+	block_sigmask(ka, signr);
 	tracehook_signal_handler(signr, info, ka, regs, 0);
 
 	return 0;
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index d54c6e5..7bb71b6 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -465,7 +465,6 @@ static inline int
 handle_signal(unsigned long signr, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
-	sigset_t blocked;
 	int err;
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
@@ -476,11 +475,7 @@ handle_signal(unsigned long signr, struct k_sigaction *ka,
 	if (err)
 		return err;
 
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NOMASK))
-		sigaddset(&blocked, signr);
-	set_current_blocked(&blocked);
-
+	block_sigmask(ka, signr);
 	tracehook_signal_handler(signr, info, ka, regs, 0);
 
 	return 0;
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index f0836cd..d8a67e6 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -479,18 +479,14 @@ static inline int handle_signal(unsigned long signr, struct k_sigaction *ka,
 				siginfo_t *info,
 				sigset_t *oldset, struct pt_regs *regs)
 {
-	sigset_t blocked;
 	int err;
 
 	err = setup_rt_frame(ka, regs, signr, oldset,
 			     (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
 	if (err)
 		return err;
-	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NOMASK))
-		sigaddset(&blocked, signr);
-	set_current_blocked(&blocked);
 
+	block_sigmask(ka, signr);
 	tracehook_signal_handler(signr, info, ka, regs, 0);
 
 	return 0;
-- 
1.7.4.4

[PATCH 33/40] tile: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/tile/kernel/compat_signal.c |    5 +----
 arch/tile/kernel/signal.c        |   13 ++-----------
 2 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index a7869ad..77763cc 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -303,10 +303,7 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index bedaf4e..f79d4b8 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -97,10 +97,7 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
@@ -286,13 +283,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 		 * the work_pending path in the return-to-user code, and
 		 * either way we can re-enable interrupts unconditionally.
 		 */
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,
-			  &current->blocked, &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+		block_sigmask(ka, sig);
 	}
 
 	return ret;
-- 
1.7.4.4

[PATCH 34/40] um: Don't restore current->blocked on error

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

If we fail to setup the signal stack frame then we don't need to
restore current->blocked because it is not modified by
setup_signal_stack_*.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/um/kernel/signal.c |    8 ++------
 1 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index e8b889d..8382e0b 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -65,13 +65,9 @@ static int handle_signal(struct pt_regs *regs, unsigned long signr,
 #endif
 		err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
 
-	if (err) {
-		spin_lock_irq(&current->sighand->siglock);
-		current->blocked = *oldset;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+	if (err)
 		force_sigsegv(signr, current);
-	} else {
+	else {
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked, &current->blocked,
 			  &ka->sa.sa_mask);
-- 
1.7.4.4

[PATCH 35/40] um: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/um/kernel/signal.c |   20 ++++++--------------
 1 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index 8382e0b..fb12f4c 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -67,15 +67,8 @@ static int handle_signal(struct pt_regs *regs, unsigned long signr,
 
 	if (err)
 		force_sigsegv(signr, current);
-	else {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, signr);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	else
+		block_sigmask(ka, signr);
 
 	return err;
 }
@@ -158,12 +151,11 @@ int do_signal(void)
  */
 long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 {
+	sigset_t blocked;
+
 	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
-- 
1.7.4.4

[PATCH 36/40] unicore32: Use block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/unicore32/kernel/signal.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
index 911b549..72d9531 100644
--- a/arch/unicore32/kernel/signal.c
+++ b/arch/unicore32/kernel/signal.c
@@ -370,10 +370,7 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka,
 	/*
 	 * Block the signal if we were successful.
 	 */
-	sigorsets(&blocked, &tsk->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&blocked, sig);
-	set_current_blocked(&blocked);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
-- 
1.7.4.4

[PATCH 37/40] xtensa: Don't reimplement force_sigsegv()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

Instead of open coding the sequence from force_sigsegv() just call
it. This also fixes a bug because we were modifying ka->sa.sa_handler
(which is a copy of sighand->action[]), whereas the intention of the
code was to modify sighand->action[] directly.

As the original code was working with a copy it had no effect on
signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/xtensa/kernel/signal.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index f2220b5..4f53770 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -425,9 +425,7 @@ static void setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return;
 
 give_sigsegv:
-	if (sig == SIGSEGV)
-		ka->sa.sa_handler = SIG_DFL;
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 }
 
 /*
-- 
1.7.4.4

[PATCH 38/40] xtensa: No need to reset handler if SA_ONESHOT

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

get_signal_to_deliver() already resets the signal handler if
SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again
in handle_signal(). Furthermore, because we were modifying
ka->sa.sa_handler (which is a copy of sighand->action[]) instead of
sighand->action[] the original code actually had no effect on signal
delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/xtensa/kernel/signal.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index 4f53770..24655e3 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -536,9 +536,6 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 		/* Set up the stack frame */
 		setup_frame(signr, &ka, &info, oldset, regs);
 
-		if (ka.sa.sa_flags & SA_ONESHOT)
-			ka.sa.sa_handler = SIG_DFL;
-
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked, &current->blocked, &ka.sa.sa_mask);
 		if (!(ka.sa.sa_flags & SA_NODEFER))
-- 
1.7.4.4

[PATCH 39/40] xtensa: Don't mask signals if we fail to setup signal stack

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

setup_frame() needs to return an indication of whether it succeeded or
failed in setting up the signal stack frame. If setup_frame() fails
then we must not modify current->blocked.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/xtensa/kernel/signal.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index 24655e3..17ceab8 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -336,8 +336,8 @@ gen_return_code(unsigned char *codemem)
 }
 
 
-static void setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			sigset_t *set, struct pt_regs *regs)
+static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+		       sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe *frame;
 	int err = 0;
@@ -422,10 +422,11 @@ static void setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		current->comm, current->pid, signal, frame, regs->pc);
 #endif
 
-	return;
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
 /*
@@ -534,7 +535,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 
 		/* Whee!  Actually deliver the signal.  */
 		/* Set up the stack frame */
-		setup_frame(signr, &ka, &info, oldset, regs);
+		ret = setup_frame(signr, &ka, &info, oldset, regs);
+		if (ret)
+			return ret;
 
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked, &current->blocked, &ka.sa.sa_mask);
-- 
1.7.4.4

[PATCH 40/40] xtensa: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

From: Matt Fleming <matt.fleming@intel.com>

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
---
 arch/xtensa/kernel/signal.c |   17 +++--------------
 1 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index 17ceab8..b69b000 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -260,10 +260,7 @@ asmlinkage long xtensa_rt_sigreturn(long a0, long a1, long a2, long a3,
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, frame))
 		goto badframe;
@@ -448,11 +445,8 @@ asmlinkage long xtensa_rt_sigsuspend(sigset_t __user *unewset,
 		return -EFAULT;
 
 	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
 	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	regs->areg[2] = -EINTR;
 	while (1) {
@@ -539,12 +533,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 		if (ret)
 			return ret;
 
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked, &ka.sa.sa_mask);
-		if (!(ka.sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, signr);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+		block_sigmask(&ka, signr);
 		if (current->ptrace & PT_SINGLESTEP)
 			task_pt_regs(current)->icountlevel = 1;
 
-- 
1.7.4.4

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Mark Salter]

On Tue, 2012-02-14 at 11:40 +0000, Matt Fleming wrote:
> From: Matt Fleming <matt.fleming@intel.com>
> 
> This series simplifies the architecture code for handling signals by
> making use of set_current_blocked() introduced in e6fa16ab ("signal:
> sigprocmask() should do retarget_shared_pending()") and
> block_sigmask() introduced in commit 5e6292c0f28f ("signal: add
> block_sigmask() for adding sigmask to current->blocked").
> 
...
> Matt Fleming (39):
...
>   C6X: Use set_current_blocked() and block_sigmask()
...
>  arch/c6x/kernel/signal.c           |   16 ++----------

The c6x patch seems to be missing from the series.

--Mark

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Matt Fleming]

On Tue, 2012-02-14 at 08:45 -0500, Mark Salter wrote:
> The c6x patch seems to be missing from the series.

I don't think it is. It reached lkml.org OK,

	https://lkml.org/lkml/2012/2/14/123

The post to the linux-c6x-dev mailing list is awaiting moderator
approval but seeing as you were Cc'd on the patch I would have expected
it to reach your inbox with problems.

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Mark Salter]

On Tue, 2012-02-14 at 13:52 +0000, Matt Fleming wrote:
> On Tue, 2012-02-14 at 08:45 -0500, Mark Salter wrote:
> > The c6x patch seems to be missing from the series.
> 
> I don't think it is. It reached lkml.org OK,
> 
> 	https://lkml.org/lkml/2012/2/14/123
> 
> The post to the linux-c6x-dev mailing list is awaiting moderator
> approval but seeing as you were Cc'd on the patch I would have expected
> it to reach your inbox with problems.
> 
Yup. I should have been more patient. I see it now.

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Matt Fleming]

On Tue, 2012-02-14 at 08:58 -0500, Mark Salter wrote:
> On Tue, 2012-02-14 at 13:52 +0000, Matt Fleming wrote:
> > On Tue, 2012-02-14 at 08:45 -0500, Mark Salter wrote:
> > > The c6x patch seems to be missing from the series.
> > 
> > I don't think it is. It reached lkml.org OK,
> > 
> > 	https://lkml.org/lkml/2012/2/14/123
> > 
> > The post to the linux-c6x-dev mailing list is awaiting moderator
> > approval but seeing as you were Cc'd on the patch I would have expected
> > it to reach your inbox with problems.
> > 
> Yup. I should have been more patient. I see it now.

Heh, I meant *without* problems ;-)

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[David Howells]

Matt Fleming <matt@console-pimps.org> wrote:

>  asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
>  {
> -	mask &= _BLOCKABLE;
> -	spin_lock_irq(&current->sighand->siglock);
> +	sigset_t blocked;
> +
>  	current->saved_sigmask = current->blocked;

Can this line create a race, now that it's not protected by a lock?  It is
possible for current->blocked to get altered by another thread.

David

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[Oleg Nesterov]

On 02/14, David Howells wrote:
>
> Matt Fleming <matt@console-pimps.org> wrote:
>
> >  asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
> >  {
> > -	mask &= _BLOCKABLE;
> > -	spin_lock_irq(&current->sighand->siglock);
> > +	sigset_t blocked;
> > +
> >  	current->saved_sigmask = current->blocked;
>
> Can this line create a race, now that it's not protected by a lock?  It is
> possible for current->blocked to get altered by another thread.

No, only current can change ->blocked. This is even documented in
sigprocmask(). And more, the only correct way to change ->blocked
is set_current_blocked(). OK, with a couple of "I know what I am
doing" exceptions in kernel/signal.c.

Oleg.

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Oleg Nesterov]

On 02/14, Matt Fleming wrote:
>
> This series simplifies the architecture code for handling signals by
> making use of set_current_blocked() introduced in e6fa16ab ("signal:
> sigprocmask() should do retarget_shared_pending()") and
> block_sigmask() introduced in commit 5e6292c0f28f ("signal: add
> block_sigmask() for adding sigmask to current->blocked").

Matt, I assume this series was not changed since we discussed it ?

If yes. I do not want to spam lkml, I'll reply to 0/40 only.

All patches look right to me, for the whole series:

Acked-by: Oleg Nesterov <oleg@redhat.com>

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

On Tue, 2012-02-14 at 15:56 +0000, David Howells wrote:
> Matt Fleming <matt@console-pimps.org> wrote:
> 
> >  asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
> >  {
> > -	mask &= _BLOCKABLE;
> > -	spin_lock_irq(&current->sighand->siglock);
> > +	sigset_t blocked;
> > +
> >  	current->saved_sigmask = current->blocked;
> 
> Can this line create a race, now that it's not protected by a lock?  It is
> possible for current->blocked to get altered by another thread.

->blocked can only ever be altered by current, not another thread. See
the following comment from sigprocmask() in kernel/signal.c,

       /* Lockless, only current can change ->blocked, never from irq */
        if (oldset)                                                                                      
                *oldset = tsk->blocked;                                                                  

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[David Howells]

Oleg Nesterov <oleg@redhat.com> wrote:

> No, only current can change ->blocked. This is even documented in
> sigprocmask(). And more, the only correct way to change ->blocked
> is set_current_blocked(). OK, with a couple of "I know what I am
> doing" exceptions in kernel/signal.c.

I was looking at force_sig_info() and derivatives.  Is that what you refer to?

If so, is it worth providing a force_sig_info_current(),
force_sigsegv_current() and force_sig_current() to make things clearer to grep
for, I wonder?

David

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[Oleg Nesterov]

On 02/14, David Howells wrote:
>
> Oleg Nesterov <oleg@redhat.com> wrote:
>
> > No, only current can change ->blocked. This is even documented in
> > sigprocmask(). And more, the only correct way to change ->blocked
> > is set_current_blocked(). OK, with a couple of "I know what I am
> > doing" exceptions in kernel/signal.c.
>
> I was looking at force_sig_info() and derivatives.  Is that what you refer to?

Ah, sorry, forgot to mention...

force_sig_info() (and its callers) need the cleanups and fixes. It
is almost always wrong if t != current.

For example, please look at

	[PATCH 1/4] signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE
	http://marc.info/?l=linux-kernel&m=132890442717122

Hopefully we can fix all ab-users soon.



Just in case... if we race with force_sig_info() the task will be
killed anyway. But I agree, this is not nice and should be fixed.
And in any case, there are other places which assume it is safe
to read current->blocked lockless.

> If so, is it worth providing a force_sig_info_current(),
> force_sigsegv_current() and force_sig_current() to make things clearer to grep
> for, I wonder?

Yes, I think the "task_struct *t" argument should die.

Oleg.

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[David Howells]

Matt Fleming <matt@console-pimps.org> wrote:

> > Can this line create a race, now that it's not protected by a lock?  It is
> > possible for current->blocked to get altered by another thread.
> 
> ->blocked can only ever be altered by current, not another thread. See
> the following comment from sigprocmask() in kernel/signal.c,

Okay, I've managed to convince myself.  Feel free to my Acked-by to the
MN10300 and FRV patches.

David

Re: [PATCH 32/40] sparc: Use block_sigmask()

[David Miller]

From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 14 Feb 2012 11:41:05 +0000

> From: Matt Fleming <matt.fleming@intel.com>
> 
> Use the new helper function introduced in commit 5e6292c0f28f
> ("signal: add block_sigmask() for adding sigmask to current->blocked")
> which centralises the code for updating current->blocked after
> successfully delivering a signal and reduces the amount of duplicate
> code across architectures. In the past some architectures got this
> code wrong, so using this helper function should stop that from
> happening again.
> 
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: sparclinux@vger.kernel.org
> Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH 08/40] cris: Use set_current_blocked() and block_sigmask()

[Jesper Nilsson]

On Tue, Feb 14, 2012 at 12:40:41PM +0100, Matt Fleming wrote:
> From: Matt Fleming <matt.fleming@intel.com>
> 
> As described in e6fa16ab ("signal: sigprocmask() should do
> retarget_shared_pending()") the modification of current->blocked is
> incorrect as we need to check whether the signal we're about to block
> is pending in the shared queue.
> 
> Also, use the new helper function introduced in commit 5e6292c0f28f
> ("signal: add block_sigmask() for adding sigmask to current->blocked")
> which centralises the code for updating current->blocked after
> successfully delivering a signal and reduces the amount of duplicate
> code across architectures. In the past some architectures got this
> code wrong, so using this helper function should stop that from
> happening again.
> 
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: Mikael Starvik <starvik@axis.com>
> Cc: Jesper Nilsson <jesper.nilsson@axis.com>

Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>

> Cc: linux-cris-kernel@axis.com
> Signed-off-by: Matt Fleming <matt.fleming@intel.com>

/^JN - Jesper Nilsson
-- 
               Jesper Nilsson -- jesper.nilsson@axis.com

Re: [PATCH 00/40] arch: set_current_blocked() and block_sigmask()

[Matt Fleming]

On Tue, 2012-02-14 at 18:32 +0100, Oleg Nesterov wrote:
> On 02/14, Matt Fleming wrote:
> >
> > This series simplifies the architecture code for handling signals by
> > making use of set_current_blocked() introduced in e6fa16ab ("signal:
> > sigprocmask() should do retarget_shared_pending()") and
> > block_sigmask() introduced in commit 5e6292c0f28f ("signal: add
> > block_sigmask() for adding sigmask to current->blocked").
> 
> Matt, I assume this series was not changed since we discussed it ?

Correct. The only new additions are the C6X and hexagon patches here,

	https://lkml.org/lkml/2012/2/14/123
	https://lkml.org/lkml/2012/2/14/155

But they're pretty much the same as all the others in the series.

> If yes. I do not want to spam lkml, I'll reply to 0/40 only.
> 
> All patches look right to me, for the whole series:
> 
> Acked-by: Oleg Nesterov <oleg@redhat.com>

Great, thanks!

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 20/40] mn10300: Use set_current_blocked() and block_sigmask()

[Matt Fleming]

On Tue, 2012-02-14 at 18:30 +0000, David Howells wrote:
> Matt Fleming <matt@console-pimps.org> wrote:
> 
> > > Can this line create a race, now that it's not protected by a lock?  It is
> > > possible for current->blocked to get altered by another thread.
> > 
> > ->blocked can only ever be altered by current, not another thread. See
> > the following comment from sigprocmask() in kernel/signal.c,
> 
> Okay, I've managed to convince myself.  Feel free to my Acked-by to the
> MN10300 and FRV patches.

Thanks! I think Andrew is picking these up, unless you want to take them
through the arch trees?

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 21/40] OpenRISC: Don't reimplement force_sigsegv()

[Jonas Bonn]

Acked-by: Jonas Bonn <jonas@southpole.se>

...for OpenRISC, all 4 patches (20-23 in this series).

Should I take these in the OpenRISC tree or how did you want to do?

/Jonas

On Tue, 2012-02-14 at 11:40 +0000, Matt Fleming wrote:
> From: Matt Fleming <matt.fleming@intel.com>
> 
> Instead of open coding the sequence from force_sigsegv() just call
> it. This also fixes a bug because we were modifying ka->sa.sa_handler
> (which is a copy of sighand->action[]), whereas the intention of the
> code was to modify sighand->action[] directly.
> 
> As the original code was working with a copy it had no effect on
> signal delivery.
> 
> Acked-by: Oleg Nesterov <oleg@redhat.com>
> Cc: Jonas Bonn <jonas@southpole.se>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: linux@lists.openrisc.net
> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
> ---
>  arch/openrisc/kernel/signal.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
> index 95207ab..53741ba 100644
> --- a/arch/openrisc/kernel/signal.c
> +++ b/arch/openrisc/kernel/signal.c
> @@ -250,9 +250,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
>  	return;
>  
>  give_sigsegv:
> -	if (sig == SIGSEGV)
> -		ka->sa.sa_handler = SIG_DFL;
> -	force_sig(SIGSEGV, current);
> +	force_sigsegv(sig, current);
>  }
>  
>  static inline void

-- 
Jonas Bonn                       South Pole AB
Phone : +46-8-56237100           Anderstorpsvägen 16
Mobile: +46-768-527755           SE-17154 Solna
jonas@southpole.se               www.southpoleconsulting.com

Re: [PATCH 21/40] OpenRISC: Don't reimplement force_sigsegv()

[Matt Fleming]

On Wed, 2012-02-15 at 16:40 +0100, Jonas Bonn wrote:
> Acked-by: Jonas Bonn <jonas@southpole.se>
> 
> ...for OpenRISC, all 4 patches (20-23 in this series).
> 
> Should I take these in the OpenRISC tree or how did you want to do?

Whatever you prefer. Feel free to take them through the OpenRISC tree.

-- 
Matt Fleming, Intel Open Source Technology Center

Re: [PATCH 21/40] OpenRISC: Don't reimplement force_sigsegv()

[Jonas Bonn]

On Wed, 2012-02-15 at 15:49 +0000, Matt Fleming wrote:
> On Wed, 2012-02-15 at 16:40 +0100, Jonas Bonn wrote:
> > Acked-by: Jonas Bonn <jonas@southpole.se>
> > 
> > ...for OpenRISC, all 4 patches (20-23 in this series).
> > 
> > Should I take these in the OpenRISC tree or how did you want to do?
> 
> Whatever you prefer. Feel free to take them through the OpenRISC tree.

OK, great, I'll pull them into the OpenRISC tree for 3.4.

Thanks,
Jonas

Re: [PATCH 06/40] blackfin: Use set_current_blocked() and block_sigmask()

[Bob Liu]

On Tue, Feb 14, 2012 at 7:40 PM, Matt Fleming <matt@console-pimps.org> wrote:
> From: Matt Fleming <matt.fleming@intel.com>
>
> As described in e6fa16ab ("signal: sigprocmask() should do
> retarget_shared_pending()") the modification of current->blocked is
> incorrect as we need to check whether the signal we're about to block
> is pending in the shared queue.
>
> Also, use the new helper function introduced in commit 5e6292c0f28f
> ("signal: add block_sigmask() for adding sigmask to current->blocked")
> which centralises the code for updating current->blocked after
> successfully delivering a signal and reduces the amount of duplicate
> code across architectures. In the past some architectures got this
> code wrong, so using this helper function should stop that from
> happening again.
>
> Cc: Oleg Nesterov <oleg@redhat.com>
> Acked-by: Mike Frysinger <vapier@gentoo.org>
> Cc: uclinux-dist-devel@blackfin.uclinux.org
> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
> ---
>  arch/blackfin/kernel/signal.c |   17 ++++-------------
>  1 files changed, 4 insertions(+), 13 deletions(-)
>
> diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
> index d536f35..05ece02 100644
> --- a/arch/blackfin/kernel/signal.c
> +++ b/arch/blackfin/kernel/signal.c
> @@ -99,10 +99,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused)
>                goto badframe;
>
>        sigdelsetmask(&set, ~_BLOCKABLE);
> -       spin_lock_irq(&current->sighand->siglock);
> -       current->blocked = set;
> -       recalc_sigpending();
> -       spin_unlock_irq(&current->sighand->siglock);
> +       set_current_blocked(&set);
>
>        if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
>                goto badframe;
> @@ -266,15 +263,9 @@ handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
>        /* set up the stack frame */
>        ret = setup_rt_frame(sig, ka, info, oldset, regs);
>
> -       if (ret == 0) {
> -               spin_lock_irq(&current->sighand->siglock);
> -               sigorsets(&current->blocked, &current->blocked,
> -                         &ka->sa.sa_mask);
> -               if (!(ka->sa.sa_flags & SA_NODEFER))
> -                       sigaddset(&current->blocked, sig);
> -               recalc_sigpending();
> -               spin_unlock_irq(&current->sighand->siglock);
> -       }
> +       if (ret == 0)
> +               block_sigmask(ka, sig);
> +
>        return ret;
>  }
>

Thanks. I'll apply it.

-- 
Regards,
--Bob

Re: [PATCH 25/40] parisc: Use set_current_blocked() and block_sigmask()

[Kyle McMartin]

On Tue, Feb 14, 2012 at 11:40:58AM +0000, Matt Fleming wrote:
> From: Matt Fleming <matt.fleming@intel.com>
> 
> As described in e6fa16ab ("signal: sigprocmask() should do
> retarget_shared_pending()") the modification of current->blocked is
> incorrect as we need to check whether the signal we're about to block
> is pending in the shared queue.
> 
> Also, use the new helper function introduced in commit 5e6292c0f28f
> ("signal: add block_sigmask() for adding sigmask to current->blocked")
> which centralises the code for updating current->blocked after
> successfully delivering a signal and reduces the amount of duplicate
> code across architectures. In the past some architectures got this
> code wrong, so using this helper function should stop that from
> happening again.
> 
> Cc: Oleg Nesterov <oleg@redhat.com>
> Cc: Kyle McMartin <kyle@mcmartin.ca>
> Cc: Helge Deller <deller@gmx.de>
> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
> Cc: linux-parisc@vger.kernel.org
> Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Nice cleanups Matt!

Acked-by: Kyle McMartin <kyle@mcmartin.ca>