[PATCH -v11 23/30] PCI: Strict checking of valid range for bridge

[Yinghai Lu <yinghai@kernel.org>]

Children bridges busn range should be allocated from parent bus range.

So we could avoid overlapping between sibling bridges on same bus.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/probe.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index bf577e8..5710411 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -730,6 +730,28 @@ static int __devinit pci_bridge_probe_busn_res(struct pci_bus *bus,
 	return ret;
 }
 
+static int __devinit pci_bridge_check_busn_broken(struct pci_bus *bus,
+				struct pci_dev *dev,
+				int secondary, int subordinate)
+{
+	int ret;
+	struct resource busn_res;
+
+	memset(&busn_res, 0, sizeof(struct resource));
+	dev_printk(KERN_DEBUG, &dev->dev,
+		 "check if busn %02x-%02x is in busn_res: %pR\n",
+		 secondary, subordinate, &bus->busn_res);
+	ret = allocate_resource(&bus->busn_res, &busn_res,
+			 (subordinate - secondary + 1),
+			 secondary, subordinate,
+			 1, NULL, NULL);
+	if (ret)
+		return 1;
+
+	release_resource(&busn_res);
+
+	return 0;
+}
 /*
  * If it's a bridge, configure it and scan the bus behind it.
  * For CardBus bridges, we don't scan behind as the devices will
@@ -768,6 +790,11 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 	    (primary != bus->number || secondary <= bus->number))
 		broken = 1;
 
+	/* more strict checking */
+	if (!pass && !broken && !dev->subordinate)
+		broken = pci_bridge_check_busn_broken(bus, dev,
+						   secondary, subordinate);
+
 	if (broken)
 		dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
 
-- 
1.7.7