* [PATCH] [trivial] video: Fix typo in drivers/video
@ 2012-07-21 15:23 Masanari Iida
0 siblings, 0 replies; only message in thread
From: Masanari Iida @ 2012-07-21 15:23 UTC (permalink / raw)
To: trivial, linux-kernel; +Cc: Masanari Iida
Correct spelling typo in debug messages and comments
within drivers/video.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
drivers/video/arcfb.c | 4 ++--
drivers/video/atmel_lcdfb.c | 2 +-
drivers/video/aty/atyfb_base.c | 2 +-
drivers/video/aty/radeon_base.c | 2 +-
drivers/video/auo_k190x.c | 2 +-
drivers/video/bfin_adv7393fb.c | 2 +-
drivers/video/cirrusfb.c | 2 +-
drivers/video/exynos/exynos_dp_reg.c | 2 +-
drivers/video/exynos/exynos_mipi_dsi.c | 4 ++--
drivers/video/i740fb.c | 6 +++---
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 2 +-
drivers/video/s3c-fb.c | 2 +-
drivers/video/savage/savagefb_driver.c | 6 +++---
drivers/video/smscufx.c | 4 ++--
drivers/video/sunxvr500.c | 2 +-
15 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index c22e8d3..a1d58e9 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -336,8 +336,8 @@ static void arcfb_lcd_update_horiz(struct arcfb_par *par, unsigned int left,
}
/*
- * here we start the process of spliting out the fb update into
- * individual blocks of pixels. we end up spliting into 64x64 blocks
+ * here we start the process of splitting out the fb update into
+ * individual blocks of pixels. we end up splitting into 64x64 blocks
* and finally down to 64x8 pages.
*/
static void arcfb_lcd_update(struct arcfb_par *par, unsigned int dx,
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index d99505b..1505539 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -939,7 +939,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
* up a splash image.
*/
} else {
- /* alocate memory buffer */
+ /* allocate memory buffer */
ret = atmel_lcdfb_alloc_video_memory(sinfo);
if (ret < 0) {
dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 622f12b..3f2e8c1 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -863,7 +863,7 @@ static int aty_var_to_crtc(const struct fb_info *info,
if ((xres > 1600) || (yres > 1200)) {
FAIL("MACH64 chips are designed for max 1600x1200\n"
- "select anoter resolution.");
+ "select another resolution.");
}
h_sync_strt = h_disp + var->right_margin;
h_sync_end = h_sync_strt + var->hsync_len;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index ce1506b..9e279ee 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2018,7 +2018,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
if ((rinfo->family == CHIP_FAMILY_RS100) ||
(rinfo->family == CHIP_FAMILY_RS200)) {
/* This is to workaround the asic bug for RMX, some versions
- of BIOS dosen't have this register initialized correctly.
+ of BIOS doesn't have this register initialized correctly.
*/
OUTREGP(CRTC_MORE_CNTL, CRTC_H_CUTOFF_ACTIVE_EN,
~CRTC_H_CUTOFF_ACTIVE_EN);
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 77da6a2..5c5b1ce 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -934,7 +934,7 @@ int __devinit auok190x_common_probe(struct platform_device *pdev,
goto err_defio;
}
- dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
+ dev_dbg(info->device, "targeting %d frames per second\n", board->fps);
info->fbdefio->delay = HZ / board->fps;
info->fbdefio->first_io = auok190xfb_dpy_first_io,
info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 9bdd4b0..d0f121b 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -58,7 +58,7 @@ static const unsigned short ppi_pins[] = {
*/
static struct bfin_adv7393_fb_par {
- /* structure holding blackfin / adv7393 paramters when
+ /* structure holding blackfin / adv7393 parameters when
screen is blanked */
struct {
u8 Mode; /* ntsc/pal/? */
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 738c8ce..bc67d05 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -1611,7 +1611,7 @@ static void init_vgachip(struct fb_info *info)
/* ext. display controls: ext.adr. wrap */
vga_wcrt(cinfo->regbase, CL_CRT1B, 0x02);
- /* Set/Reset registes: - */
+ /* Set/Reset registers: - */
vga_wgfx(cinfo->regbase, VGA_GFX_SR_VALUE, 0x00);
/* Set/Reset enable: - */
vga_wgfx(cinfo->regbase, VGA_GFX_SR_ENABLE, 0x00);
diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
index 6ce76d5..bcb0e3a 100644
--- a/drivers/video/exynos/exynos_dp_reg.c
+++ b/drivers/video/exynos/exynos_dp_reg.c
@@ -752,7 +752,7 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
/*
* If Rx sends defer, Tx sends only reads
- * request without sending addres
+ * request without sending address
*/
if (!defer)
retval = exynos_dp_select_i2c_device(dp,
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 6c1f5c3..22bbe1c 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -106,7 +106,7 @@ static void exynos_mipi_update_cfg(struct mipi_dsim_device *dsim)
/*
* data from Display controller(FIMD) is transferred in video mode
- * but in case of command mode, all settigs is updated to registers.
+ * but in case of command mode, all settings are updated to registers.
*/
exynos_mipi_dsi_stand_by(dsim, 1);
}
@@ -461,7 +461,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
done:
platform_set_drvdata(pdev, dsim);
- dev_dbg(&pdev->dev, "%s() completed sucessfuly (%s mode)\n", __func__,
+ dev_dbg(&pdev->dev, "%s() completed sucessfully (%s mode)\n", __func__,
dsim_config->e_interface == DSIM_COMMAND ? "CPU" : "RGB");
return 0;
diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
index fe574d8..ff3f880 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/i740fb.c
@@ -497,7 +497,7 @@ static int i740fb_decode_var(const struct fb_var_screeninfo *var,
mem = vxres * vyres * ((bpp + 1) / 8);
if (mem > info->screen_size) {
- dev_err(info->device, "not enough video memory (%d KB requested, %ld KB avaliable)\n",
+ dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
mem >> 10, info->screen_size >> 10);
return -ENOMEM;
}
@@ -728,7 +728,7 @@ static void vga_protect(struct i740fb_par *par)
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
i740inb(par, 0x3DA);
- i740outb(par, VGA_ATT_W, 0x00); /* enable pallete access */
+ i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */
}
static void vga_unprotect(struct i740fb_par *par)
@@ -737,7 +737,7 @@ static void vga_unprotect(struct i740fb_par *par)
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
i740inb(par, 0x3DA);
- i740outb(par, VGA_ATT_W, 0x20); /* disable pallete access */
+ i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */
}
static int i740fb_set_par(struct fb_info *info)
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 4dae1b2..52bd3a2 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1240,7 +1240,7 @@ int ti_hdmi_4xxx_audio_config(struct hdmi_ip_data *ip_data,
else
core.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
/*
- * The I2S input word length is twice the lenght given in the IEC-60958
+ * The I2S input word length is twice the length given in the IEC-60958
* status word. If the word size is greater than
* 20 bits, increment by one.
*/
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5f9d8e690..3305d95 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -189,7 +189,7 @@ struct s3c_fb_vsync {
/**
* struct s3c_fb - overall hardware state of the hardware
- * @slock: The spinlock protection for this data sturcture.
+ * @slock: The spinlock protection for this data sturucture.
* @dev: The device that we bound to, for printing, etc.
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
* @lcd_clk: The clk (sclk) feeding pixclk.
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index cee7803..b4c2e21 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -662,7 +662,7 @@ static void savage_get_default_par(struct savagefb_par *par, struct savage_reg *
vga_out8(0x3c4, 0x18, par);
reg->SR18 = vga_in8(0x3c5, par);
- /* Save flat panel expansion regsters. */
+ /* Save flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
@@ -815,7 +815,7 @@ static void savage_set_default_par(struct savagefb_par *par,
vga_out8(0x3c4, 0x18, par);
vga_out8(0x3c5, reg->SR18, par);
- /* Save flat panel expansion regsters. */
+ /* Save flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
@@ -1318,7 +1318,7 @@ static void savagefb_set_par_int(struct savagefb_par *par, struct savage_reg *r
vga_out8(0x3c4, 0x15, par);
vga_out8(0x3c5, reg->SR15, par);
- /* Restore flat panel expansion regsters. */
+ /* Restore flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
index af3ef27..062aacd 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/smscufx.c
@@ -1002,7 +1002,7 @@ static int ufx_ops_ioctl(struct fb_info *info, unsigned int cmd,
/* TODO: Help propose a standard fb.h ioctl to report mmap damage */
if (cmd == UFX_IOCTL_REPORT_DAMAGE) {
/* If we have a damage-aware client, turn fb_defio "off"
- * To avoid perf imact of unecessary page fault handling.
+ * To avoid perf imact of unnecessary page fault handling.
* Done by resetting the delay for this fb_info to a very
* long period. Pages will become writable and stay that way.
* Reset to normal value when all clients have closed this fb.
@@ -1466,7 +1466,7 @@ static int ufx_read_edid(struct ufx_data *dev, u8 *edid, int edid_len)
/* all FF's in the first 16 bytes indicates nothing is connected */
for (i = 0; i < 16; i++) {
if (edid[i] != 0xFF) {
- pr_debug("edid data read succesfully");
+ pr_debug("edid data read successfully");
return EDID_LENGTH;
}
}
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
index b9c2b94..eb931b8 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -12,7 +12,7 @@
#include <asm/io.h>
-/* XXX This device has a 'dev-comm' property which aparently is
+/* XXX This device has a 'dev-comm' property which apparently is
* XXX a pointer into the openfirmware's address space which is
* XXX a shared area the kernel driver can use to keep OBP
* XXX informed about the current resolution setting. The idea
--
1.7.11.2.249.g31c7954
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-07-21 15:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-21 15:23 [PATCH] [trivial] video: Fix typo in drivers/video Masanari Iida
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).