* [PATCH 00/21] TTY buffer in tty_port and other stuff
@ 2012-10-18 20:26 Jiri Slaby
2012-10-18 20:26 ` [PATCH 01/21] TTY: devpts, don't care about TTY in devpts_get_tty Jiri Slaby
` (23 more replies)
0 siblings, 24 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
Hi,
this is the fifth series of patches which finally move tty buffers
from tty_struct (present from open to close/hangup) to tty_port
(present as long as the device). This allows us to get rid of the tty
refcounting in the interrupt service routines and other hot paths
after we are done. This is because we do not need to handle races
among ISRs, timers, hangups and others, because tty_port lives as long
as an interrupt/timer tick may occur. Unlike tty_struct.
This set also cleans up devpts handling a bit. Devpts used to play
with tty->driver_data which was a bit ugly. Now devpts returns a node
which we store to driver_data and pass it back when we need devpts to
kill that. As a result, we can do that in the pty code instead of an
ugly hook in tty_release.
Finally, the set moves all the n_tty private stuff from tty_struct to
its own (internal) structure. This was an intention last time ago (at
least here), but the races and undefined ldisc->open/close behavior
did not allow us to do that. Now that we have ldisc kills and waits
and bells and whistles we could finally go ahead.
As usual, standard x86 stuff was runtime-tested. The rest is only
checked to be compilation-errors free.
Jiri Slaby (21):
TTY: devpts, don't care about TTY in devpts_get_tty
TTY: devpts, return created inode from devpts_pty_new
TTY: devpts, do not set driver_data
TTY: devpts, document devpts inode operations
TTY: move devpts kill to pty
TTY: vt, fix paste_selection ldisc handling
TTY: ldisc, wait for idle ldisc in release
TTY: hci_ldisc, remove invalid check in open
TTY: n_tty, simplify read_buf+echo_buf allocation
TTY: n_tty, remove bogus checks
TTY: audit, stop accessing tty->icount
TTY: n_tty, add ldisc data to n_tty
TTY: move ldisc data from tty_struct: simple members
TTY: move ldisc data from tty_struct: bitmaps
TTY: move ldisc data from tty_struct: read_* and echo_* and canon_*
stuff
TTY: move ldisc data from tty_struct: locks
TTY: n_tty, propagate n_tty_data
TTY: move TTY_FLUSH* flags to tty_port
TTY: tty_buffer, cache pointer to tty->buf
TTY: add port -> tty link
TTY: move tty buffers to tty_port
drivers/bluetooth/hci_ldisc.c | 7 +-
drivers/tty/n_tty.c | 752 ++++++++++++++++++++++--------------------
drivers/tty/pty.c | 30 +-
drivers/tty/tty_audit.c | 15 +-
drivers/tty/tty_buffer.c | 224 +++++++------
drivers/tty/tty_io.c | 15 +-
drivers/tty/tty_ldisc.c | 15 +-
drivers/tty/tty_port.c | 2 +
drivers/tty/vt/selection.c | 9 +-
fs/devpts/inode.c | 61 ++--
include/linux/devpts_fs.h | 20 +-
include/linux/tty.h | 44 +--
include/linux/tty_flip.h | 2 +-
13 files changed, 633 insertions(+), 563 deletions(-)
--
1.7.12.3
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 01/21] TTY: devpts, don't care about TTY in devpts_get_tty
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 02/21] TTY: devpts, return created inode from devpts_pty_new Jiri Slaby
` (22 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.
First, here we remove TTY from devpts_get_tty and rename it to
devpts_get_priv. Note we do not remove type safety, we just shift the
[implicit] (void *) cast one layer up.
index was unused in devpts_get_tty, so remove that from the prototype
too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 2 +-
fs/devpts/inode.c | 9 ++++-----
include/linux/devpts_fs.h | 7 +++----
3 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a82b399..65f7671 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -547,7 +547,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_tty(pts_inode, idx);
+ tty = devpts_get_priv(pts_inode);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 14afbab..4796580 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -593,10 +593,10 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
return ret;
}
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
+void *devpts_get_priv(struct inode *pts_inode)
{
struct dentry *dentry;
- struct tty_struct *tty;
+ void *priv = NULL;
BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
@@ -605,13 +605,12 @@ struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
if (!dentry)
return NULL;
- tty = NULL;
if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- tty = (struct tty_struct *)pts_inode->i_private;
+ priv = pts_inode->i_private;
dput(dentry);
- return tty;
+ return priv;
}
void devpts_pty_kill(struct tty_struct *tty)
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 5ce0e5f..de635a5 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -21,8 +21,8 @@ int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
-/* get tty structure */
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+/* get private structure */
+void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
void devpts_pty_kill(struct tty_struct *tty);
@@ -36,8 +36,7 @@ static inline int devpts_pty_new(struct inode *ptmx_inode,
{
return -EINVAL;
}
-static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
- int number)
+static inline void *devpts_get_priv(struct inode *pts_inode)
{
return NULL;
}
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 02/21] TTY: devpts, return created inode from devpts_pty_new
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
2012-10-18 20:26 ` [PATCH 01/21] TTY: devpts, don't care about TTY in devpts_get_tty Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 03/21] TTY: devpts, do not set driver_data Jiri Slaby
` (21 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.
For the cleanup of layering, we will need the inode created in
devpts_pty_new to be stored into slave's driver_data. So we convert
devpts_pty_new to return the inode or an ERR_PTR-encoded error in case
of failure.
The move of 'inode = new_inode(sb);' from declarators to the code is
only cosmetical, but it makes the code easier to read.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 7 +++++--
fs/devpts/inode.c | 12 ++++++------
include/linux/devpts_fs.h | 8 ++++----
3 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 65f7671..9985b45 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -614,6 +614,7 @@ static const struct tty_operations pty_unix98_ops = {
static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
+ struct inode *slave_inode;
int retval;
int index;
@@ -650,9 +651,11 @@ static int ptmx_open(struct inode *inode, struct file *filp)
tty_add_file(tty, filp);
- retval = devpts_pty_new(inode, tty->link);
- if (retval)
+ slave_inode = devpts_pty_new(inode, tty->link);
+ if (IS_ERR(slave_inode)) {
+ retval = PTR_ERR(slave_inode);
goto err_release;
+ }
retval = ptm_driver->ops->open(tty, filp);
if (retval)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 4796580..ec3bab7 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -545,7 +545,7 @@ void devpts_kill_index(struct inode *ptmx_inode, int idx)
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
+struct inode *devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
{
/* tty layer puts index from devpts_new_index() in here */
int number = tty->index;
@@ -553,19 +553,19 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct super_block *sb = pts_sb_from_inode(ptmx_inode);
- struct inode *inode = new_inode(sb);
+ struct inode *inode;
struct dentry *root = sb->s_root;
struct pts_fs_info *fsi = DEVPTS_SB(sb);
struct pts_mount_opts *opts = &fsi->mount_opts;
- int ret = 0;
char s[12];
/* We're supposed to be given the slave end of a pty */
BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
BUG_ON(driver->subtype != PTY_TYPE_SLAVE);
+ inode = new_inode(sb);
if (!inode)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
inode->i_ino = number + 3;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
@@ -585,12 +585,12 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
fsnotify_create(root->d_inode, dentry);
} else {
iput(inode);
- ret = -ENOMEM;
+ inode = ERR_PTR(-ENOMEM);
}
mutex_unlock(&root->d_inode->i_mutex);
- return ret;
+ return inode;
}
void *devpts_get_priv(struct inode *pts_inode)
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index de635a5..4ca846f 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -20,7 +20,7 @@
int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
+struct inode *devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
/* get private structure */
void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
@@ -31,10 +31,10 @@ void devpts_pty_kill(struct tty_struct *tty);
/* Dummy stubs in the no-pty case */
static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
-static inline int devpts_pty_new(struct inode *ptmx_inode,
- struct tty_struct *tty)
+static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
+ struct tty_struct *tty)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
static inline void *devpts_get_priv(struct inode *pts_inode)
{
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 03/21] TTY: devpts, do not set driver_data
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
2012-10-18 20:26 ` [PATCH 01/21] TTY: devpts, don't care about TTY in devpts_get_tty Jiri Slaby
2012-10-18 20:26 ` [PATCH 02/21] TTY: devpts, return created inode from devpts_pty_new Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 04/21] TTY: devpts, document devpts inode operations Jiri Slaby
` (20 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
The goal is to stop setting and using tty->driver_data in devpts code.
It should be used solely by the driver's code, pty in this case.
Now driver_data are managed only in the pty driver. devpts_pty_new is
switched to accept what we used to dig out of tty_struct, i.e. device
node number and index.
This also removes a note about driver_data being set outside of the
driver.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 10 +++++-----
fs/devpts/inode.c | 21 ++++++---------------
include/linux/devpts_fs.h | 9 +++++----
3 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 9985b45..559e5b2 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -4,9 +4,6 @@
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
- * When reading this code see also fs/devpts. In particular note that the
- * driver_data field is used by the devpts side as a binding to the devpts
- * inode.
*/
#include <linux/module.h>
@@ -59,7 +56,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
- devpts_pty_kill(tty->link);
+ devpts_pty_kill(tty->link->driver_data);
mutex_unlock(&devpts_mutex);
}
#endif
@@ -651,7 +648,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
tty_add_file(tty, filp);
- slave_inode = devpts_pty_new(inode, tty->link);
+ slave_inode = devpts_pty_new(inode,
+ MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+ tty->link);
if (IS_ERR(slave_inode)) {
retval = PTR_ERR(slave_inode);
goto err_release;
@@ -662,6 +661,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
goto err_release;
tty_unlock(tty);
+ tty->link->driver_data = slave_inode;
return 0;
err_release:
tty_unlock(tty);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index ec3bab7..7a20d67 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -545,12 +545,9 @@ void devpts_kill_index(struct inode *ptmx_inode, int idx)
mutex_unlock(&allocated_ptys_lock);
}
-struct inode *devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv)
{
- /* tty layer puts index from devpts_new_index() in here */
- int number = tty->index;
- struct tty_driver *driver = tty->driver;
- dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct super_block *sb = pts_sb_from_inode(ptmx_inode);
struct inode *inode;
@@ -559,23 +556,18 @@ struct inode *devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
struct pts_mount_opts *opts = &fsi->mount_opts;
char s[12];
- /* We're supposed to be given the slave end of a pty */
- BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
- BUG_ON(driver->subtype != PTY_TYPE_SLAVE);
-
inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
- inode->i_ino = number + 3;
+ inode->i_ino = index + 3;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
inode->i_gid = opts->setgid ? opts->gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|opts->mode, device);
- inode->i_private = tty;
- tty->driver_data = inode;
+ inode->i_private = priv;
- sprintf(s, "%d", number);
+ sprintf(s, "%d", index);
mutex_lock(&root->d_inode->i_mutex);
@@ -613,9 +605,8 @@ void *devpts_get_priv(struct inode *pts_inode)
return priv;
}
-void devpts_pty_kill(struct tty_struct *tty)
+void devpts_pty_kill(struct inode *inode)
{
- struct inode *inode = tty->driver_data;
struct super_block *sb = pts_sb_from_inode(inode);
struct dentry *root = sb->s_root;
struct dentry *dentry;
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 4ca846f..251a209 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -20,11 +20,12 @@
int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
-struct inode *devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv);
/* get private structure */
void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
-void devpts_pty_kill(struct tty_struct *tty);
+void devpts_pty_kill(struct inode *inode);
#else
@@ -32,7 +33,7 @@ void devpts_pty_kill(struct tty_struct *tty);
static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
- struct tty_struct *tty)
+ dev_t device, int index, void *priv)
{
return ERR_PTR(-EINVAL);
}
@@ -40,7 +41,7 @@ static inline void *devpts_get_priv(struct inode *pts_inode)
{
return NULL;
}
-static inline void devpts_pty_kill(struct tty_struct *tty) { }
+static inline void devpts_pty_kill(struct inode *inode) { }
#endif
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 04/21] TTY: devpts, document devpts inode operations
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (2 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 03/21] TTY: devpts, do not set driver_data Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 05/21] TTY: move devpts kill to pty Jiri Slaby
` (19 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
Add kernel-doc texts for some devpts functions, i.e. document them.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
fs/devpts/inode.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 7a20d67..472e6be 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -545,6 +545,15 @@ void devpts_kill_index(struct inode *ptmx_inode, int idx)
mutex_unlock(&allocated_ptys_lock);
}
+/**
+ * devpts_pty_new -- create a new inode in /dev/pts/
+ * @ptmx_inode: inode of the master
+ * @device: major+minor of the node to be created
+ * @index: used as a name of the node
+ * @priv: what's given back by devpts_get_priv
+ *
+ * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill.
+ */
struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
void *priv)
{
@@ -585,6 +594,12 @@ struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
return inode;
}
+/**
+ * devpts_get_priv -- get private data for a slave
+ * @pts_inode: inode of the slave
+ *
+ * Returns whatever was passed as priv in devpts_pty_new for a given inode.
+ */
void *devpts_get_priv(struct inode *pts_inode)
{
struct dentry *dentry;
@@ -605,6 +620,12 @@ void *devpts_get_priv(struct inode *pts_inode)
return priv;
}
+/**
+ * devpts_pty_kill -- remove inode form /dev/pts/
+ * @inode: inode of the slave to be removed
+ *
+ * This is an inverse operation of devpts_pty_new.
+ */
void devpts_pty_kill(struct inode *inode)
{
struct super_block *sb = pts_sb_from_inode(inode);
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 05/21] TTY: move devpts kill to pty
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (3 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 04/21] TTY: devpts, document devpts inode operations Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 06/21] TTY: vt, fix paste_selection ldisc handling Jiri Slaby
` (18 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
Now that we have control over tty->driver_data in pty, we can just
kill the /dev/pts/ in pty code too. Namely, in ->shutdown hook of
tty. For pty, this is called only once, for whichever end is closed
last. But we don't care, both driver_data are the inode as it used to
be till now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 9 +++++++++
drivers/tty/tty_io.c | 5 -----
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 559e5b2..2728afe 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -363,6 +363,12 @@ err:
return retval;
}
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+ devpts_kill_index(tty->driver_data, tty->index);
+}
+
static void pty_cleanup(struct tty_struct *tty)
{
kfree(tty->port);
@@ -578,6 +584,7 @@ static const struct tty_operations ptm_unix98_ops = {
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
.resize = pty_resize,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup
};
@@ -593,6 +600,7 @@ static const struct tty_operations pty_unix98_ops = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup,
};
@@ -661,6 +669,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
goto err_release;
tty_unlock(tty);
+ tty->driver_data = inode;
tty->link->driver_data = slave_inode;
return 0;
err_release:
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2ea176b..e835a5b8 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1625,7 +1625,6 @@ int tty_release(struct inode *inode, struct file *filp)
struct tty_struct *tty = file_tty(filp);
struct tty_struct *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
- int devpts;
int idx;
char buf[64];
@@ -1640,7 +1639,6 @@ int tty_release(struct inode *inode, struct file *filp)
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
- devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
/* Review: parallel close */
o_tty = tty->link;
@@ -1799,9 +1797,6 @@ int tty_release(struct inode *inode, struct file *filp)
release_tty(tty, idx);
mutex_unlock(&tty_mutex);
- /* Make this pty number available for reallocation */
- if (devpts)
- devpts_kill_index(inode, idx);
return 0;
}
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 06/21] TTY: vt, fix paste_selection ldisc handling
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (4 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 05/21] TTY: move devpts kill to pty Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 07/21] TTY: ldisc, wait for idle ldisc in release Jiri Slaby
` (17 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
There used to be a single tty_ldisc_ref_wait. But then, when a
big-tty-mutex (BTM) was introduced, it has to be tty_ldisc_ref +
tty_unlock + tty_ldisc_ref_wait + tty_lock. Later, BTM was removed
from that path and tty_ldisc_ref + tty_ldisc_ref_wait remained there.
But it makes no sense now. So leave there only tty_ldisc_ref_wait.
And when we have a reference to an ldisc, actually use it in the loop.
Otherwise it may be racy.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/vt/selection.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8e9b4be..60b7b69 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -341,15 +341,11 @@ int paste_selection(struct tty_struct *tty)
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
-
console_lock();
poke_blanked_console();
console_unlock();
- /* FIXME: wtf is this supposed to achieve ? */
- ld = tty_ldisc_ref(tty);
- if (!ld)
- ld = tty_ldisc_ref_wait(tty);
+ ld = tty_ldisc_ref_wait(tty);
/* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
@@ -361,8 +357,7 @@ int paste_selection(struct tty_struct *tty)
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
- NULL, count);
+ ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 07/21] TTY: ldisc, wait for idle ldisc in release
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (5 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 06/21] TTY: vt, fix paste_selection ldisc handling Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open Jiri Slaby
` (16 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
We reintroduced tty_ldisc_wait_idle in 100eeae2c5c (TTY: restore
tty_ldisc_wait_idle) and used in set_ldisc. Then we added it also to
the hangup path in 92f6fa09bd453 (TTY: ldisc, do not close until there
are readers). And we noted that there is one more path:
~ Before 65b770468e98 tty_ldisc_wait_idle was called also from
~ tty_ldisc_release. It is called from tty_release, so I don't think
~ we need to restore that one.
Well, I was wrong. There might still be holders of an ldisc
reference. Not from userspace, but drivers. If they take a reference
and a user closes the device immediately after that, we have a
problem. ldisc is halted and closed by TTY, but the driver still may
call some ldisc's operation and cause a crash.
So restore the tty_ldisc_wait_idle call also to the third location
where it was before 65b770468e98 (tty-ldisc: turn ldisc user count
into a proper refcount). Now we should be safe with respect to the
ldisc reference counting as all* tty_ldisc_close paths are safely
called with reference count of one.
* Not the one in tty_ldisc_setup's fail path. But that is called
before the first open finishes. So userspace does not see it yet.
Even thought the driver is given the TTY already via ->install, it
should not take a reference to the ldisc yet. If some driver is to
do this, we should put one tty_ldisc_wait_idle also in the setup.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/tty_ldisc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 0f2a2c5..47e3968 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -897,6 +897,11 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
static void tty_ldisc_kill(struct tty_struct *tty)
{
+ /* There cannot be users from userspace now. But there still might be
+ * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+ * ldisc until they are done. */
+ tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (6 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 07/21] TTY: ldisc, wait for idle ldisc in release Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:47 ` Marcel Holtmann
2012-10-18 20:26 ` [PATCH 09/21] TTY: n_tty, simplify read_buf+echo_buf allocation Jiri Slaby
` (15 subsequent siblings)
23 siblings, 1 reply; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh
Cc: alan, linux-kernel, jirislaby, Marcel Holtmann, Gustavo Padovan,
Johan Hedberg, linux-bluetooth
hci_ldisc's open checks if tty_struct->disc_data is set. And if so it
returns with an error. But nothing ensures disc_data to be NULL. And
since ld->ops->open shall be called only once, we do not need the
check at all. So remove it.
Note that this is not an issue now, but n_tty will start using the
disc_data pointer and this invalid 'if' would trigger then rendering
TTYs over BT unusable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
---
drivers/bluetooth/hci_ldisc.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c8abce3..ed0fade 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -270,15 +270,10 @@ static int hci_uart_send_frame(struct sk_buff *skb)
*/
static int hci_uart_tty_open(struct tty_struct *tty)
{
- struct hci_uart *hu = (void *) tty->disc_data;
+ struct hci_uart *hu;
BT_DBG("tty %p", tty);
- /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
- the pointer */
- if (hu)
- return -EEXIST;
-
/* Error if the tty has no write op instead of leaving an exploitable
hole */
if (tty->ops->write == NULL)
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 09/21] TTY: n_tty, simplify read_buf+echo_buf allocation
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (7 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 10/21] TTY: n_tty, remove bogus checks Jiri Slaby
` (14 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
ldisc->open and close are called only once and cannot cross. So the
tests in open and close are superfluous. Remove them. (But leave sets
to NULL to ensure there is not a bug somewhere.)
And when the tests are gone, handle properly failures in open. We
leaked read_buf if allocation of echo_buf failed before. Now this is
not the case anymore.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 31 +++++++++++++------------------
1 file changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8c0b7b4..f27289d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1561,14 +1561,10 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
static void n_tty_close(struct tty_struct *tty)
{
n_tty_flush_buffer(tty);
- if (tty->read_buf) {
- kfree(tty->read_buf);
- tty->read_buf = NULL;
- }
- if (tty->echo_buf) {
- kfree(tty->echo_buf);
- tty->echo_buf = NULL;
- }
+ kfree(tty->read_buf);
+ kfree(tty->echo_buf);
+ tty->read_buf = NULL;
+ tty->echo_buf = NULL;
}
/**
@@ -1587,17 +1583,11 @@ static int n_tty_open(struct tty_struct *tty)
return -EINVAL;
/* These are ugly. Currently a malloc failure here can panic */
- if (!tty->read_buf) {
- tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!tty->read_buf)
- return -ENOMEM;
- }
- if (!tty->echo_buf) {
- tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ if (!tty->read_buf || !tty->echo_buf)
+ goto err_free_bufs;
- if (!tty->echo_buf)
- return -ENOMEM;
- }
reset_buffer_flags(tty);
tty_unthrottle(tty);
tty->column = 0;
@@ -1605,6 +1595,11 @@ static int n_tty_open(struct tty_struct *tty)
tty->minimum_to_wake = 1;
tty->closing = 0;
return 0;
+err_free_bufs:
+ kfree(tty->read_buf);
+ kfree(tty->echo_buf);
+
+ return -ENOMEM;
}
static inline int input_available_p(struct tty_struct *tty, int amt)
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 10/21] TTY: n_tty, remove bogus checks
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (8 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 09/21] TTY: n_tty, simplify read_buf+echo_buf allocation Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 11/21] TTY: audit, stop accessing tty->icount Jiri Slaby
` (13 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
* BUG_ON(!tty) in n_tty_set_termios -- it cannot be called with tty ==
NULL. It is called from two call sites. First, from n_tty_open where
we have a valid tty. Second, as ld->ops->set_termios from
tty_set_termios. But there we have a valid tty too.
* if (!tty) in n_tty_open -- why would the TTY layer call ldisc's
open with an invalid TTY? No it indeed does not. All call sites have
a tty and dereference that.
* BUG_ON(!tty->read_buf) in n_tty_read -- this used to be a valid
check. The ldisc handling was broken some time ago when I added the
check to ensure everything is OK. It still can catch the case, but
no later than we move the buffer to ldisc data. Then there will be
no read_buf in tty_struct, i.e. nothing to check for.
* if (!tty->read_buf) in n_tty_receive_buf -- this should never
happen. All callers of ldisc->ops->receive_ops should hold a
reference to an ldisc and close (which frees read_buf) cannot be
called until the reference is dropped.
* if (WARN_ON(!tty->read_buf)) in n_tty_read -- the same as in the
previous case.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f27289d..ceae074 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1375,9 +1375,6 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char buf[64];
unsigned long cpuflags;
- if (!tty->read_buf)
- return;
-
if (tty->real_raw) {
spin_lock_irqsave(&tty->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - tty->read_cnt,
@@ -1471,7 +1468,6 @@ int is_ignored(int sig)
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
int canon_change = 1;
- BUG_ON(!tty);
if (old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
@@ -1579,9 +1575,6 @@ static void n_tty_close(struct tty_struct *tty)
static int n_tty_open(struct tty_struct *tty)
{
- if (!tty)
- return -EINVAL;
-
/* These are ugly. Currently a malloc failure here can panic */
tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1736,10 +1729,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
int packet;
do_it_again:
-
- if (WARN_ON(!tty->read_buf))
- return -EAGAIN;
-
c = job_control(tty, file);
if (c < 0)
return c;
@@ -1825,7 +1814,6 @@ do_it_again:
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
- BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 11/21] TTY: audit, stop accessing tty->icount
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (9 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 10/21] TTY: n_tty, remove bogus checks Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 12/21] TTY: n_tty, add ldisc data to n_tty Jiri Slaby
` (12 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
This is a private member of n_tty. Stop accessing it. Instead, take is
as an argument.
This is needed to allow clean switch of the private members to a
separate private structure of n_tty.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 5 +++--
drivers/tty/tty_audit.c | 15 ++++++++-------
include/linux/tty.h | 4 ++--
3 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ceae074..3ebab0c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -76,7 +76,7 @@
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
- tty_audit_add_data(tty, &x, 1);
+ tty_audit_add_data(tty, &x, 1, tty->icanon);
return put_user(x, ptr);
}
@@ -1644,7 +1644,8 @@ static int copy_from_read_buf(struct tty_struct *tty,
n -= retval;
is_eof = n == 1 &&
tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
+ tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
+ tty->icanon);
spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
tty->read_cnt -= n;
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index b0b39b8..6953dc8 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -23,7 +23,7 @@ struct tty_audit_buf {
};
static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
- int icanon)
+ unsigned icanon)
{
struct tty_audit_buf *buf;
@@ -239,7 +239,8 @@ int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid)
* if TTY auditing is disabled or out of memory. Otherwise, return a new
* reference to the buffer.
*/
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+ unsigned icanon)
{
struct tty_audit_buf *buf, *buf2;
@@ -257,7 +258,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
buf2 = tty_audit_buf_alloc(tty->driver->major,
tty->driver->minor_start + tty->index,
- tty->icanon);
+ icanon);
if (buf2 == NULL) {
audit_log_lost("out of memory in TTY auditing");
return NULL;
@@ -287,7 +288,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
* Audit @data of @size from @tty, if necessary.
*/
void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size)
+ size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
int major, minor;
@@ -299,7 +300,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
&& tty->driver->subtype == PTY_TYPE_MASTER)
return;
- buf = tty_audit_buf_get(tty);
+ buf = tty_audit_buf_get(tty, icanon);
if (!buf)
return;
@@ -307,11 +308,11 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
major = tty->driver->major;
minor = tty->driver->minor_start + tty->index;
if (buf->major != major || buf->minor != minor
- || buf->icanon != tty->icanon) {
+ || buf->icanon != icanon) {
tty_audit_buf_push_current(buf);
buf->major = major;
buf->minor = minor;
- buf->icanon = tty->icanon;
+ buf->icanon = icanon;
}
do {
size_t run;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f0b4eb4..f02712d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -535,7 +535,7 @@ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size);
+ size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
@@ -544,7 +544,7 @@ extern int tty_audit_push_task(struct task_struct *tsk,
kuid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size)
+ unsigned char *data, size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 12/21] TTY: n_tty, add ldisc data to n_tty
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (10 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 11/21] TTY: audit, stop accessing tty->icount Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 13/21] TTY: move ldisc data from tty_struct: simple members Jiri Slaby
` (11 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
All n_tty related members from tty_struct will be moved here.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3ebab0c..3d1594e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -73,6 +73,10 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+struct n_tty_data {
+ char dummy;
+};
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
@@ -1556,11 +1560,15 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
static void n_tty_close(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
n_tty_flush_buffer(tty);
kfree(tty->read_buf);
kfree(tty->echo_buf);
+ kfree(ldata);
tty->read_buf = NULL;
tty->echo_buf = NULL;
+ tty->disc_data = NULL;
}
/**
@@ -1575,23 +1583,32 @@ static void n_tty_close(struct tty_struct *tty)
static int n_tty_open(struct tty_struct *tty)
{
+ struct n_tty_data *ldata;
+
+ ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ if (!ldata)
+ goto err;
+
/* These are ugly. Currently a malloc failure here can panic */
tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
if (!tty->read_buf || !tty->echo_buf)
goto err_free_bufs;
+ tty->disc_data = ldata;
reset_buffer_flags(tty);
tty_unthrottle(tty);
tty->column = 0;
n_tty_set_termios(tty, NULL);
tty->minimum_to_wake = 1;
tty->closing = 0;
+
return 0;
err_free_bufs:
kfree(tty->read_buf);
kfree(tty->echo_buf);
-
+ kfree(ldata);
+err:
return -ENOMEM;
}
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 13/21] TTY: move ldisc data from tty_struct: simple members
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (11 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 12/21] TTY: n_tty, add ldisc data to n_tty Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 14/21] TTY: move ldisc data from tty_struct: bitmaps Jiri Slaby
` (10 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
Here we start moving all the n_tty related bits from tty_struct to
the newly defined n_tty_data struct in n_tty proper.
In this patch primitive members and bits are moved. The rest will be
done per-partes in the next patches.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 160 ++++++++++++++++++++++++++++++---------------------
drivers/tty/tty_io.c | 1 -
include/linux/tty.h | 5 --
3 files changed, 93 insertions(+), 73 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3d1594e..bd775a7 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -74,13 +74,20 @@
#define ECHO_OP_ERASE_TAB 0x82
struct n_tty_data {
- char dummy;
+ unsigned int column;
+ unsigned long overrun_time;
+ int num_overrun;
+
+ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+ unsigned char echo_overrun:1;
};
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
- tty_audit_add_data(tty, &x, 1, tty->icanon);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ tty_audit_add_data(tty, &x, 1, ldata->icanon);
return put_user(x, ptr);
}
@@ -96,6 +103,7 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int left;
int old_left;
@@ -115,7 +123,7 @@ static void n_tty_set_room(struct tty_struct *tty)
* characters will be beeped.
*/
if (left <= 0)
- left = tty->icanon && !tty->canon_data;
+ left = ldata->icanon && !tty->canon_data;
old_left = tty->receive_room;
tty->receive_room = left;
@@ -183,6 +191,7 @@ static void check_unthrottle(struct tty_struct *tty)
static void reset_buffer_flags(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
spin_lock_irqsave(&tty->read_lock, flags);
@@ -190,10 +199,10 @@ static void reset_buffer_flags(struct tty_struct *tty)
spin_unlock_irqrestore(&tty->read_lock, flags);
mutex_lock(&tty->echo_lock);
- tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
+ tty->echo_pos = tty->echo_cnt = ldata->echo_overrun = 0;
mutex_unlock(&tty->echo_lock);
- tty->canon_head = tty->canon_data = tty->erasing = 0;
+ tty->canon_head = tty->canon_data = ldata->erasing = 0;
memset(&tty->read_flags, 0, sizeof tty->read_flags);
n_tty_set_room(tty);
}
@@ -239,11 +248,12 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
ssize_t n = 0;
spin_lock_irqsave(&tty->read_lock, flags);
- if (!tty->icanon) {
+ if (!ldata->icanon) {
n = tty->read_cnt;
} else if (tty->canon_data) {
n = (tty->canon_head > tty->read_tail) ?
@@ -305,6 +315,7 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
{
+ struct n_tty_data *ldata = tty->disc_data;
int spaces;
if (!space)
@@ -313,48 +324,48 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->canon_column = tty->column = 0;
+ tty->canon_column = ldata->column = 0;
tty->ops->write(tty, "\r\n", 2);
return 2;
}
- tty->canon_column = tty->column;
+ tty->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
return 0;
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
- tty->canon_column = tty->column = 0;
+ tty->canon_column = ldata->column = 0;
break;
}
- tty->canon_column = tty->column = 0;
+ tty->canon_column = ldata->column = 0;
break;
case '\t':
- spaces = 8 - (tty->column & 7);
+ spaces = 8 - (ldata->column & 7);
if (O_TABDLY(tty) == XTABS) {
if (space < spaces)
return -1;
- tty->column += spaces;
+ ldata->column += spaces;
tty->ops->write(tty, " ", spaces);
return spaces;
}
- tty->column += spaces;
+ ldata->column += spaces;
break;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
c = toupper(c);
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -415,6 +426,7 @@ static int process_output(unsigned char c, struct tty_struct *tty)
static ssize_t process_output_block(struct tty_struct *tty,
const unsigned char *buf, unsigned int nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space;
int i;
const unsigned char *cp;
@@ -435,30 +447,30 @@ static ssize_t process_output_block(struct tty_struct *tty,
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty))
goto break_out;
- tty->canon_column = tty->column;
+ tty->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
goto break_out;
if (O_OCRNL(tty))
goto break_out;
- tty->canon_column = tty->column = 0;
+ tty->canon_column = ldata->column = 0;
break;
case '\t':
goto break_out;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
goto break_out;
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -498,6 +510,7 @@ break_out:
static void process_echoes(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, nr;
unsigned char c;
unsigned char *cp, *buf_end;
@@ -559,22 +572,22 @@ static void process_echoes(struct tty_struct *tty)
space -= num_bs;
while (num_bs--) {
tty_put_char(tty, '\b');
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
}
cp += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
- tty->canon_column = tty->column;
+ tty->canon_column = ldata->column;
cp += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
cp += 2;
nr -= 2;
break;
@@ -586,7 +599,7 @@ static void process_echoes(struct tty_struct *tty)
break;
}
tty_put_char(tty, ECHO_OP_START);
- tty->column++;
+ ldata->column++;
space--;
cp += 2;
nr -= 2;
@@ -608,7 +621,7 @@ static void process_echoes(struct tty_struct *tty)
}
tty_put_char(tty, '^');
tty_put_char(tty, op ^ 0100);
- tty->column += 2;
+ ldata->column += 2;
space -= 2;
cp += 2;
nr -= 2;
@@ -641,14 +654,14 @@ static void process_echoes(struct tty_struct *tty)
if (nr == 0) {
tty->echo_pos = 0;
tty->echo_cnt = 0;
- tty->echo_overrun = 0;
+ ldata->echo_overrun = 0;
} else {
int num_processed = tty->echo_cnt - nr;
tty->echo_pos += num_processed;
tty->echo_pos &= N_TTY_BUF_SIZE - 1;
tty->echo_cnt = nr;
if (num_processed > 0)
- tty->echo_overrun = 0;
+ ldata->echo_overrun = 0;
}
mutex_unlock(&tty->echo_lock);
@@ -670,6 +683,7 @@ static void process_echoes(struct tty_struct *tty)
static void add_echo_byte(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int new_byte_pos;
if (tty->echo_cnt == N_TTY_BUF_SIZE) {
@@ -695,7 +709,7 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
}
tty->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_overrun = 1;
+ ldata->echo_overrun = 1;
} else {
new_byte_pos = tty->echo_pos + tty->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
@@ -845,9 +859,10 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
static inline void finish_erasing(struct tty_struct *tty)
{
- if (tty->erasing) {
+ struct n_tty_data *ldata = tty->disc_data;
+ if (ldata->erasing) {
echo_char_raw('/', tty);
- tty->erasing = 0;
+ ldata->erasing = 0;
}
}
@@ -865,6 +880,7 @@ static inline void finish_erasing(struct tty_struct *tty)
static void eraser(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
int head, seen_alnums, cnt;
unsigned long flags;
@@ -932,9 +948,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
spin_unlock_irqrestore(&tty->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
- if (!tty->erasing) {
+ if (!ldata->erasing) {
echo_char_raw('\\', tty);
- tty->erasing = 1;
+ ldata->erasing = 1;
}
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
@@ -1056,16 +1072,17 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
static inline void n_tty_receive_overrun(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
char buf[64];
- tty->num_overrun++;
- if (time_before(tty->overrun_time, jiffies - HZ) ||
- time_after(tty->overrun_time, jiffies)) {
+ ldata->num_overrun++;
+ if (time_after(jiffies, ldata->overrun_time + HZ) ||
+ time_after(ldata->overrun_time, jiffies)) {
printk(KERN_WARNING "%s: %d input overrun(s)\n",
tty_name(tty, buf),
- tty->num_overrun);
- tty->overrun_time = jiffies;
- tty->num_overrun = 0;
+ ldata->num_overrun);
+ ldata->overrun_time = jiffies;
+ ldata->num_overrun = 0;
}
}
@@ -1105,10 +1122,11 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
int parmrk;
- if (tty->raw) {
+ if (ldata->raw) {
put_tty_queue(c, tty);
return;
}
@@ -1147,8 +1165,8 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, tty->process_char_map) || tty->lnext) {
- tty->lnext = 0;
+ if (!test_bit(c, tty->process_char_map) || ldata->lnext) {
+ ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
@@ -1222,7 +1240,7 @@ send_signal:
} else if (c == '\n' && I_INLCR(tty))
c = '\r';
- if (tty->icanon) {
+ if (ldata->icanon) {
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
@@ -1230,7 +1248,7 @@ send_signal:
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
- tty->lnext = 1;
+ ldata->lnext = 1;
if (L_ECHO(tty)) {
finish_erasing(tty);
if (L_ECHOCTL(tty)) {
@@ -1373,13 +1391,14 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
unsigned long cpuflags;
- if (tty->real_raw) {
+ if (ldata->real_raw) {
spin_lock_irqsave(&tty->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - tty->read_cnt,
N_TTY_BUF_SIZE - tty->read_head);
@@ -1427,7 +1446,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
n_tty_set_room(tty);
- if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ if ((!ldata->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1471,6 +1490,7 @@ int is_ignored(int sig)
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
+ struct n_tty_data *ldata = tty->disc_data;
int canon_change = 1;
if (old)
@@ -1479,16 +1499,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
memset(&tty->read_flags, 0, sizeof tty->read_flags);
tty->canon_head = tty->read_tail;
tty->canon_data = 0;
- tty->erasing = 0;
+ ldata->erasing = 0;
}
if (canon_change && !L_ICANON(tty) && tty->read_cnt)
wake_up_interruptible(&tty->read_wait);
- tty->icanon = (L_ICANON(tty) != 0);
+ ldata->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
- tty->raw = 1;
- tty->real_raw = 1;
+ ldata->raw = 1;
+ ldata->real_raw = 1;
n_tty_set_room(tty);
return;
}
@@ -1531,16 +1551,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
set_bit(SUSP_CHAR(tty), tty->process_char_map);
}
clear_bit(__DISABLED_CHAR, tty->process_char_map);
- tty->raw = 0;
- tty->real_raw = 0;
+ ldata->raw = 0;
+ ldata->real_raw = 0;
} else {
- tty->raw = 1;
+ ldata->raw = 1;
if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
(I_IGNPAR(tty) || !I_INPCK(tty)) &&
(tty->driver->flags & TTY_DRIVER_REAL_RAW))
- tty->real_raw = 1;
+ ldata->real_raw = 1;
else
- tty->real_raw = 0;
+ ldata->real_raw = 0;
}
n_tty_set_room(tty);
/* The termios change make the tty ready for I/O */
@@ -1589,6 +1609,8 @@ static int n_tty_open(struct tty_struct *tty)
if (!ldata)
goto err;
+ ldata->overrun_time = jiffies;
+
/* These are ugly. Currently a malloc failure here can panic */
tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1598,7 +1620,7 @@ static int n_tty_open(struct tty_struct *tty)
tty->disc_data = ldata;
reset_buffer_flags(tty);
tty_unthrottle(tty);
- tty->column = 0;
+ ldata->column = 0;
n_tty_set_termios(tty, NULL);
tty->minimum_to_wake = 1;
tty->closing = 0;
@@ -1614,8 +1636,10 @@ err:
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
tty_flush_to_ldisc(tty);
- if (tty->icanon && !L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty)) {
if (tty->canon_data)
return 1;
} else if (tty->read_cnt >= (amt ? amt : 1))
@@ -1646,6 +1670,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
size_t *nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
unsigned long flags;
@@ -1662,12 +1687,12 @@ static int copy_from_read_buf(struct tty_struct *tty,
is_eof = n == 1 &&
tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
- tty->icanon);
+ ldata->icanon);
spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
tty->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !tty->read_cnt)
n = 0;
spin_unlock_irqrestore(&tty->read_lock, flags);
*b += n;
@@ -1736,6 +1761,7 @@ static int job_control(struct tty_struct *tty, struct file *file)
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DECLARE_WAITQUEUE(wait, current);
int c;
@@ -1753,7 +1779,7 @@ do_it_again:
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
- if (!tty->icanon) {
+ if (!ldata->icanon) {
time = (HZ / 10) * TIME_CHAR(tty);
minimum = MIN_CHAR(tty);
if (minimum) {
@@ -1846,7 +1872,7 @@ do_it_again:
nr--;
}
- if (tty->icanon && !L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
spin_lock_irqsave(&tty->read_lock, flags);
while (nr && tty->read_cnt) {
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index e835a5b8..67b024c 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2932,7 +2932,6 @@ void initialize_tty_struct(struct tty_struct *tty,
tty_ldisc_init(tty);
tty->session = NULL;
tty->pgrp = NULL;
- tty->overrun_time = jiffies;
tty_buffer_init(tty);
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f02712d..de590ce 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -270,13 +270,8 @@ struct tty_struct {
* historical reasons, this is included in the tty structure.
* Mostly locked by the BKL.
*/
- unsigned int column;
- unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char closing:1;
- unsigned char echo_overrun:1;
unsigned short minimum_to_wake;
- unsigned long overrun_time;
- int num_overrun;
unsigned long process_char_map[256/(8*sizeof(unsigned long))];
char *read_buf;
int read_head;
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 14/21] TTY: move ldisc data from tty_struct: bitmaps
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (12 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 13/21] TTY: move ldisc data from tty_struct: simple members Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 15/21] TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff Jiri Slaby
` (9 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
Here we move bitmaps and use DECLARE_BITMAP to declare them in the new
structure. And instead of memset, we use bitmap_zero as it is more
appropriate.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 52 ++++++++++++++++++++++++++++------------------------
include/linux/tty.h | 2 --
2 files changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index bd775a7..702dd4a 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -80,6 +80,9 @@ struct n_tty_data {
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char echo_overrun:1;
+
+ DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
};
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -203,7 +206,7 @@ static void reset_buffer_flags(struct tty_struct *tty)
mutex_unlock(&tty->echo_lock);
tty->canon_head = tty->canon_data = ldata->erasing = 0;
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
n_tty_set_room(tty);
}
@@ -1165,7 +1168,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, tty->process_char_map) || ldata->lnext) {
+ if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
@@ -1321,7 +1324,7 @@ send_signal:
handle_newline:
spin_lock_irqsave(&tty->read_lock, flags);
- set_bit(tty->read_head, tty->read_flags);
+ set_bit(tty->read_head, ldata->read_flags);
put_tty_queue_nolock(c, tty);
tty->canon_head = tty->read_head;
tty->canon_data++;
@@ -1496,7 +1499,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
if (old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
tty->canon_head = tty->read_tail;
tty->canon_data = 0;
ldata->erasing = 0;
@@ -1516,41 +1519,41 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- memset(tty->process_char_map, 0, 256/8);
+ bitmap_zero(ldata->process_char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', tty->process_char_map);
+ set_bit('\r', ldata->process_char_map);
if (I_INLCR(tty))
- set_bit('\n', tty->process_char_map);
+ set_bit('\n', ldata->process_char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), tty->process_char_map);
- set_bit(KILL_CHAR(tty), tty->process_char_map);
- set_bit(EOF_CHAR(tty), tty->process_char_map);
- set_bit('\n', tty->process_char_map);
- set_bit(EOL_CHAR(tty), tty->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+ set_bit(KILL_CHAR(tty), ldata->process_char_map);
+ set_bit(EOF_CHAR(tty), ldata->process_char_map);
+ set_bit('\n', ldata->process_char_map);
+ set_bit(EOL_CHAR(tty), ldata->process_char_map);
if (L_IEXTEN(tty)) {
set_bit(WERASE_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(LNEXT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(EOL2_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), tty->process_char_map);
- set_bit(STOP_CHAR(tty), tty->process_char_map);
+ set_bit(START_CHAR(tty), ldata->process_char_map);
+ set_bit(STOP_CHAR(tty), ldata->process_char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), tty->process_char_map);
- set_bit(QUIT_CHAR(tty), tty->process_char_map);
- set_bit(SUSP_CHAR(tty), tty->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->process_char_map);
+ set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+ set_bit(SUSP_CHAR(tty), ldata->process_char_map);
}
- clear_bit(__DISABLED_CHAR, tty->process_char_map);
+ clear_bit(__DISABLED_CHAR, ldata->process_char_map);
ldata->raw = 0;
ldata->real_raw = 0;
} else {
@@ -1879,7 +1882,7 @@ do_it_again:
int eol;
eol = test_and_clear_bit(tty->read_tail,
- tty->read_flags);
+ ldata->read_flags);
c = tty->read_buf[tty->read_tail];
tty->read_tail = ((tty->read_tail+1) &
(N_TTY_BUF_SIZE-1));
@@ -2105,6 +2108,7 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
static unsigned long inq_canon(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int nr, head, tail;
if (!tty->canon_data)
@@ -2114,7 +2118,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
+ if (test_bit(tail, ldata->read_flags) &&
tty->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index de590ce..2161e6b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -272,12 +272,10 @@ struct tty_struct {
*/
unsigned char closing:1;
unsigned short minimum_to_wake;
- unsigned long process_char_map[256/(8*sizeof(unsigned long))];
char *read_buf;
int read_head;
int read_tail;
int read_cnt;
- unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
unsigned char *echo_buf;
unsigned int echo_pos;
unsigned int echo_cnt;
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 15/21] TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (13 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 14/21] TTY: move ldisc data from tty_struct: bitmaps Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 16/21] TTY: move ldisc data from tty_struct: locks Jiri Slaby
` (8 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
All the ring-buffers...
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 260 +++++++++++++++++++++++++++-------------------------
include/linux/tty.h | 10 --
2 files changed, 137 insertions(+), 133 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 702dd4a..4794537 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -83,6 +83,19 @@ struct n_tty_data {
DECLARE_BITMAP(process_char_map, 256);
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+ char *read_buf;
+ int read_head;
+ int read_tail;
+ int read_cnt;
+
+ unsigned char *echo_buf;
+ unsigned int echo_pos;
+ unsigned int echo_cnt;
+
+ int canon_data;
+ unsigned long canon_head;
+ unsigned int canon_column;
};
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -110,14 +123,14 @@ static void n_tty_set_room(struct tty_struct *tty)
int left;
int old_left;
- /* tty->read_cnt is not read locked ? */
+ /* ldata->read_cnt is not read locked ? */
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
/*
* If we are doing input canonicalization, and there are no
@@ -126,7 +139,7 @@ static void n_tty_set_room(struct tty_struct *tty)
* characters will be beeped.
*/
if (left <= 0)
- left = ldata->icanon && !tty->canon_data;
+ left = ldata->icanon && !ldata->canon_data;
old_left = tty->receive_room;
tty->receive_room = left;
@@ -137,10 +150,12 @@ static void n_tty_set_room(struct tty_struct *tty)
static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
{
- if (tty->read_cnt < N_TTY_BUF_SIZE) {
- tty->read_buf[tty->read_head] = c;
- tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt++;
+ struct n_tty_data *ldata = tty->disc_data;
+
+ if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ ldata->read_buf[ldata->read_head] = c;
+ ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt++;
}
}
@@ -198,14 +213,14 @@ static void reset_buffer_flags(struct tty_struct *tty)
unsigned long flags;
spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = tty->read_tail = tty->read_cnt = 0;
+ ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
spin_unlock_irqrestore(&tty->read_lock, flags);
mutex_lock(&tty->echo_lock);
- tty->echo_pos = tty->echo_cnt = ldata->echo_overrun = 0;
+ ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
mutex_unlock(&tty->echo_lock);
- tty->canon_head = tty->canon_data = ldata->erasing = 0;
+ ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
n_tty_set_room(tty);
}
@@ -257,11 +272,11 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
spin_lock_irqsave(&tty->read_lock, flags);
if (!ldata->icanon) {
- n = tty->read_cnt;
- } else if (tty->canon_data) {
- n = (tty->canon_head > tty->read_tail) ?
- tty->canon_head - tty->read_tail :
- tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+ n = ldata->read_cnt;
+ } else if (ldata->canon_data) {
+ n = (ldata->canon_head > ldata->read_tail) ?
+ ldata->canon_head - ldata->read_tail :
+ ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
}
spin_unlock_irqrestore(&tty->read_lock, flags);
return n;
@@ -331,11 +346,11 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->canon_column = ldata->column = 0;
+ ldata->canon_column = ldata->column = 0;
tty->ops->write(tty, "\r\n", 2);
return 2;
}
- tty->canon_column = ldata->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
if (O_ONOCR(tty) && ldata->column == 0)
@@ -343,10 +358,10 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
- tty->canon_column = ldata->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
}
- tty->canon_column = ldata->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
spaces = 8 - (ldata->column & 7);
@@ -453,14 +468,14 @@ static ssize_t process_output_block(struct tty_struct *tty,
ldata->column = 0;
if (O_ONLCR(tty))
goto break_out;
- tty->canon_column = ldata->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
if (O_ONOCR(tty) && ldata->column == 0)
goto break_out;
if (O_OCRNL(tty))
goto break_out;
- tty->canon_column = ldata->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
goto break_out;
@@ -518,7 +533,7 @@ static void process_echoes(struct tty_struct *tty)
unsigned char c;
unsigned char *cp, *buf_end;
- if (!tty->echo_cnt)
+ if (!ldata->echo_cnt)
return;
mutex_lock(&tty->output_lock);
@@ -526,9 +541,9 @@ static void process_echoes(struct tty_struct *tty)
space = tty_write_room(tty);
- buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
- cp = tty->echo_buf + tty->echo_pos;
- nr = tty->echo_cnt;
+ buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+ cp = ldata->echo_buf + ldata->echo_pos;
+ nr = ldata->echo_cnt;
while (nr > 0) {
c = *cp;
if (c == ECHO_OP_START) {
@@ -565,7 +580,7 @@ static void process_echoes(struct tty_struct *tty)
* Otherwise, tab spacing is normal.
*/
if (!(num_chars & 0x80))
- num_chars += tty->canon_column;
+ num_chars += ldata->canon_column;
num_bs = 8 - (num_chars & 7);
if (num_bs > space) {
@@ -583,7 +598,7 @@ static void process_echoes(struct tty_struct *tty)
break;
case ECHO_OP_SET_CANON_COL:
- tty->canon_column = ldata->column;
+ ldata->canon_column = ldata->column;
cp += 2;
nr -= 2;
break;
@@ -655,14 +670,14 @@ static void process_echoes(struct tty_struct *tty)
}
if (nr == 0) {
- tty->echo_pos = 0;
- tty->echo_cnt = 0;
+ ldata->echo_pos = 0;
+ ldata->echo_cnt = 0;
ldata->echo_overrun = 0;
} else {
- int num_processed = tty->echo_cnt - nr;
- tty->echo_pos += num_processed;
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt = nr;
+ int num_processed = ldata->echo_cnt - nr;
+ ldata->echo_pos += num_processed;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_cnt = nr;
if (num_processed > 0)
ldata->echo_overrun = 0;
}
@@ -689,37 +704,37 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
struct n_tty_data *ldata = tty->disc_data;
int new_byte_pos;
- if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
/* Circular buffer is already at capacity */
- new_byte_pos = tty->echo_pos;
+ new_byte_pos = ldata->echo_pos;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
- if (tty->echo_buf[(tty->echo_pos + 1) &
+ if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+ if (ldata->echo_buf[(ldata->echo_pos + 1) &
(N_TTY_BUF_SIZE - 1)] ==
ECHO_OP_ERASE_TAB) {
- tty->echo_pos += 3;
- tty->echo_cnt -= 2;
+ ldata->echo_pos += 3;
+ ldata->echo_cnt -= 2;
} else {
- tty->echo_pos += 2;
- tty->echo_cnt -= 1;
+ ldata->echo_pos += 2;
+ ldata->echo_cnt -= 1;
}
} else {
- tty->echo_pos++;
+ ldata->echo_pos++;
}
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
ldata->echo_overrun = 1;
} else {
- new_byte_pos = tty->echo_pos + tty->echo_cnt;
+ new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt++;
+ ldata->echo_cnt++;
}
- tty->echo_buf[new_byte_pos] = c;
+ ldata->echo_buf[new_byte_pos] = c;
}
/**
@@ -889,7 +904,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
unsigned long flags;
/* FIXME: locking needed ? */
- if (tty->read_head == tty->canon_head) {
+ if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
}
@@ -900,17 +915,17 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else {
if (!L_ECHO(tty)) {
spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
+ ldata->read_head = ldata->canon_head;
spin_unlock_irqrestore(&tty->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
+ ldata->read_head = ldata->canon_head;
spin_unlock_irqrestore(&tty->read_lock, flags);
finish_erasing(tty);
echo_char(KILL_CHAR(tty), tty);
@@ -924,14 +939,14 @@ static void eraser(unsigned char c, struct tty_struct *tty)
seen_alnums = 0;
/* FIXME: Locking ?? */
- while (tty->read_head != tty->canon_head) {
- head = tty->read_head;
+ while (ldata->read_head != ldata->canon_head) {
+ head = ldata->read_head;
/* erase a single possibly multibyte character */
do {
head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[head];
- } while (is_continuation(c, tty) && head != tty->canon_head);
+ c = ldata->read_buf[head];
+ } while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
if (is_continuation(c, tty))
@@ -944,10 +959,10 @@ static void eraser(unsigned char c, struct tty_struct *tty)
else if (seen_alnums)
break;
}
- cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
+ cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = head;
- tty->read_cnt -= cnt;
+ ldata->read_head = head;
+ ldata->read_cnt -= cnt;
spin_unlock_irqrestore(&tty->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
@@ -959,7 +974,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(tty->read_buf[head], tty);
+ echo_char_raw(ldata->read_buf[head], tty);
echo_move_back_col(tty);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
@@ -967,7 +982,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = tty->read_head;
+ unsigned long tail = ldata->read_head;
/*
* Count the columns used for characters
@@ -976,9 +991,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* This info is used to go back the correct
* number of columns.
*/
- while (tail != tty->canon_head) {
+ while (tail != ldata->canon_head) {
tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[tail];
+ c = ldata->read_buf[tail];
if (c == '\t') {
after_tab = 1;
break;
@@ -1006,7 +1021,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
if (kill_type == ERASE)
break;
}
- if (tty->read_head == tty->canon_head && L_ECHO(tty))
+ if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
finish_erasing(tty);
}
@@ -1171,7 +1186,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1180,7 +1195,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
if (L_ECHO(tty)) {
finish_erasing(tty);
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
+ if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(tty);
echo_char(c, tty);
process_echoes(tty);
@@ -1264,20 +1279,20 @@ send_signal:
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = tty->canon_head;
+ unsigned long tail = ldata->canon_head;
finish_erasing(tty);
echo_char(c, tty);
echo_char_raw('\n', tty);
- while (tail != tty->read_head) {
- echo_char(tty->read_buf[tail], tty);
+ while (tail != ldata->read_head) {
+ echo_char(ldata->read_buf[tail], tty);
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
process_echoes(tty);
return;
}
if (c == '\n') {
- if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1289,9 +1304,9 @@ send_signal:
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (tty->read_cnt >= N_TTY_BUF_SIZE)
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE)
return;
- if (tty->canon_head != tty->read_head)
+ if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
@@ -1300,7 +1315,7 @@ send_signal:
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1310,7 +1325,7 @@ send_signal:
*/
if (L_ECHO(tty)) {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
+ if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(tty);
echo_char(c, tty);
process_echoes(tty);
@@ -1324,10 +1339,10 @@ send_signal:
handle_newline:
spin_lock_irqsave(&tty->read_lock, flags);
- set_bit(tty->read_head, ldata->read_flags);
+ set_bit(ldata->read_head, ldata->read_flags);
put_tty_queue_nolock(c, tty);
- tty->canon_head = tty->read_head;
- tty->canon_data++;
+ ldata->canon_head = ldata->read_head;
+ ldata->canon_data++;
spin_unlock_irqrestore(&tty->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1337,7 +1352,7 @@ handle_newline:
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
@@ -1349,7 +1364,7 @@ handle_newline:
echo_char_raw('\n', tty);
else {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
+ if (ldata->canon_head == ldata->read_head)
echo_set_canon_col(tty);
echo_char(c, tty);
}
@@ -1403,21 +1418,21 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (ldata->real_raw) {
spin_lock_irqsave(&tty->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
spin_unlock_irqrestore(&tty->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
@@ -1449,7 +1464,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
n_tty_set_room(tty);
- if ((!ldata->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1500,12 +1515,12 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
+ ldata->canon_head = ldata->read_tail;
+ ldata->canon_data = 0;
ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
wake_up_interruptible(&tty->read_wait);
ldata->icanon = (L_ICANON(tty) != 0);
@@ -1586,11 +1601,9 @@ static void n_tty_close(struct tty_struct *tty)
struct n_tty_data *ldata = tty->disc_data;
n_tty_flush_buffer(tty);
- kfree(tty->read_buf);
- kfree(tty->echo_buf);
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
kfree(ldata);
- tty->read_buf = NULL;
- tty->echo_buf = NULL;
tty->disc_data = NULL;
}
@@ -1615,9 +1628,9 @@ static int n_tty_open(struct tty_struct *tty)
ldata->overrun_time = jiffies;
/* These are ugly. Currently a malloc failure here can panic */
- tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!tty->read_buf || !tty->echo_buf)
+ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ if (!ldata->read_buf || !ldata->echo_buf)
goto err_free_bufs;
tty->disc_data = ldata;
@@ -1630,8 +1643,8 @@ static int n_tty_open(struct tty_struct *tty)
return 0;
err_free_bufs:
- kfree(tty->read_buf);
- kfree(tty->echo_buf);
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
kfree(ldata);
err:
return -ENOMEM;
@@ -1643,9 +1656,9 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
tty_flush_to_ldisc(tty);
if (ldata->icanon && !L_EXTPROC(tty)) {
- if (tty->canon_data)
+ if (ldata->canon_data)
return 1;
- } else if (tty->read_cnt >= (amt ? amt : 1))
+ } else if (ldata->read_cnt >= (amt ? amt : 1))
return 1;
return 0;
@@ -1681,21 +1694,21 @@ static int copy_from_read_buf(struct tty_struct *tty,
retval = 0;
spin_lock_irqsave(&tty->read_lock, flags);
- n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+ n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
spin_unlock_irqrestore(&tty->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+ retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
n -= retval;
is_eof = n == 1 &&
- tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n,
+ ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+ tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
ldata->icanon);
spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt -= n;
+ ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && ldata->icanon && is_eof && !tty->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
n = 0;
spin_unlock_irqrestore(&tty->read_lock, flags);
*b += n;
@@ -1878,22 +1891,22 @@ do_it_again:
if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
spin_lock_irqsave(&tty->read_lock, flags);
- while (nr && tty->read_cnt) {
+ while (nr && ldata->read_cnt) {
int eol;
- eol = test_and_clear_bit(tty->read_tail,
+ eol = test_and_clear_bit(ldata->read_tail,
ldata->read_flags);
- c = tty->read_buf[tty->read_tail];
- tty->read_tail = ((tty->read_tail+1) &
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = ((ldata->read_tail+1) &
(N_TTY_BUF_SIZE-1));
- tty->read_cnt--;
+ ldata->read_cnt--;
if (eol) {
/* this test should be redundant:
* we shouldn't be reading data if
* canon_data is 0
*/
- if (--tty->canon_data < 0)
- tty->canon_data = 0;
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
spin_unlock_irqrestore(&tty->read_lock, flags);
@@ -2111,15 +2124,15 @@ static unsigned long inq_canon(struct tty_struct *tty)
struct n_tty_data *ldata = tty->disc_data;
int nr, head, tail;
- if (!tty->canon_data)
+ if (!ldata->canon_data)
return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
+ head = ldata->canon_head;
+ tail = ldata->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
if (test_bit(tail, ldata->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
+ ldata->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
@@ -2129,6 +2142,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
switch (cmd) {
@@ -2136,7 +2150,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = tty->read_cnt;
+ retval = ldata->read_cnt;
if (L_ICANON(tty))
retval = inq_canon(tty);
return put_user(retval, (unsigned int __user *) arg);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2161e6b..226cf20 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -272,16 +272,6 @@ struct tty_struct {
*/
unsigned char closing:1;
unsigned short minimum_to_wake;
- char *read_buf;
- int read_head;
- int read_tail;
- int read_cnt;
- unsigned char *echo_buf;
- unsigned int echo_pos;
- unsigned int echo_cnt;
- int canon_data;
- unsigned long canon_head;
- unsigned int canon_column;
struct mutex atomic_read_lock;
struct mutex atomic_write_lock;
struct mutex output_lock;
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 16/21] TTY: move ldisc data from tty_struct: locks
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (14 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 15/21] TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 17/21] TTY: n_tty, propagate n_tty_data Jiri Slaby
` (7 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
atomic_write_lock is not n_tty specific, so move it up in the
tty_struct.
And since these are the last ones to move, remove also the comment
saying there are some ldisc' members. There are none now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 123 ++++++++++++++++++++++++++++++---------------------
drivers/tty/tty_io.c | 4 --
include/linux/tty.h | 11 +----
3 files changed, 73 insertions(+), 65 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 4794537..0a6fcda 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -96,6 +96,11 @@ struct n_tty_data {
int canon_data;
unsigned long canon_head;
unsigned int canon_column;
+
+ struct mutex atomic_read_lock;
+ struct mutex output_lock;
+ struct mutex echo_lock;
+ spinlock_t read_lock;
};
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
@@ -171,14 +176,15 @@ static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
static void put_tty_queue(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
/*
* The problem of stomping on the buffers ends here.
* Why didn't anyone see this one coming? --AJK
*/
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
put_tty_queue_nolock(c, tty);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
}
/**
@@ -212,13 +218,13 @@ static void reset_buffer_flags(struct tty_struct *tty)
struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
@@ -270,7 +276,7 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
ssize_t n = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
if (!ldata->icanon) {
n = ldata->read_cnt;
} else if (ldata->canon_data) {
@@ -278,7 +284,7 @@ static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
ldata->canon_head - ldata->read_tail :
ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
@@ -408,14 +414,15 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
static int process_output(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, retval;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
retval = do_output_char(c, tty, space);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
if (retval < 0)
return -1;
else
@@ -449,11 +456,11 @@ static ssize_t process_output_block(struct tty_struct *tty,
int i;
const unsigned char *cp;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
if (!space) {
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return 0;
}
if (nr > space)
@@ -496,7 +503,7 @@ static ssize_t process_output_block(struct tty_struct *tty,
break_out:
i = tty->ops->write(tty, buf, i);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return i;
}
@@ -536,8 +543,8 @@ static void process_echoes(struct tty_struct *tty)
if (!ldata->echo_cnt)
return;
- mutex_lock(&tty->output_lock);
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->output_lock);
+ mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
@@ -682,8 +689,8 @@ static void process_echoes(struct tty_struct *tty)
ldata->echo_overrun = 0;
}
- mutex_unlock(&tty->echo_lock);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->echo_lock);
+ mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
@@ -748,12 +755,14 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
static void echo_move_back_col(struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, tty);
add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -768,12 +777,14 @@ static void echo_move_back_col(struct tty_struct *tty)
static void echo_set_canon_col(struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, tty);
add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -796,7 +807,9 @@ static void echo_set_canon_col(struct tty_struct *tty)
static void echo_erase_tab(unsigned int num_chars, int after_tab,
struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
add_echo_byte(ECHO_OP_START, tty);
add_echo_byte(ECHO_OP_ERASE_TAB, tty);
@@ -810,7 +823,7 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
add_echo_byte(num_chars, tty);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -828,7 +841,9 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
static void echo_char_raw(unsigned char c, struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, tty);
@@ -837,7 +852,7 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
add_echo_byte(c, tty);
}
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -856,7 +871,9 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
static void echo_char(unsigned char c, struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
add_echo_byte(ECHO_OP_START, tty);
@@ -867,7 +884,7 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
add_echo_byte(c, tty);
}
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -914,19 +931,19 @@ static void eraser(unsigned char c, struct tty_struct *tty)
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
finish_erasing(tty);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
@@ -960,10 +977,10 @@ static void eraser(unsigned char c, struct tty_struct *tty)
break;
}
cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_head = head;
ldata->read_cnt -= cnt;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!ldata->erasing) {
@@ -1338,12 +1355,12 @@ send_signal:
put_tty_queue(c, tty);
handle_newline:
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
set_bit(ldata->read_head, ldata->read_flags);
put_tty_queue_nolock(c, tty);
ldata->canon_head = ldata->read_head;
ldata->canon_data++;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1417,7 +1434,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
unsigned long cpuflags;
if (ldata->real_raw) {
- spin_lock_irqsave(&tty->read_lock, cpuflags);
+ spin_lock_irqsave(&ldata->read_lock, cpuflags);
i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
@@ -1433,7 +1450,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
memcpy(ldata->read_buf + ldata->read_head, cp, i);
ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt += i;
- spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+ spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
@@ -1626,6 +1643,10 @@ static int n_tty_open(struct tty_struct *tty)
goto err;
ldata->overrun_time = jiffies;
+ mutex_init(&ldata->atomic_read_lock);
+ mutex_init(&ldata->output_lock);
+ mutex_init(&ldata->echo_lock);
+ spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
@@ -1677,7 +1698,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
* buffer, and once to drain the space from the (physical) beginning of
* the buffer to head pointer.
*
- * Called under the tty->atomic_read_lock sem
+ * Called under the ldata->atomic_read_lock sem
*
*/
@@ -1693,10 +1714,10 @@ static int copy_from_read_buf(struct tty_struct *tty,
bool is_eof;
retval = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
n -= retval;
@@ -1704,13 +1725,13 @@ static int copy_from_read_buf(struct tty_struct *tty,
ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
ldata->icanon);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
n = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
@@ -1818,10 +1839,10 @@ do_it_again:
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&tty->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock))
return -EAGAIN;
} else {
- if (mutex_lock_interruptible(&tty->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock))
return -ERESTARTSYS;
}
packet = tty->packet;
@@ -1890,7 +1911,7 @@ do_it_again:
if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
while (nr && ldata->read_cnt) {
int eol;
@@ -1908,25 +1929,25 @@ do_it_again:
if (--ldata->canon_data < 0)
ldata->canon_data = 0;
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (!eol || (c != __DISABLED_CHAR)) {
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (retval)
break;
} else {
@@ -1958,7 +1979,7 @@ do_it_again:
if (time)
timeout = time;
}
- mutex_unlock(&tty->atomic_read_lock);
+ mutex_unlock(&ldata->atomic_read_lock);
remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 67b024c..f90b621 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2939,11 +2939,7 @@ void initialize_tty_struct(struct tty_struct *tty,
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
- mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
- mutex_init(&tty->output_lock);
- mutex_init(&tty->echo_lock);
- spin_lock_init(&tty->read_lock);
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 226cf20..08787ec 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -235,6 +235,7 @@ struct tty_struct {
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
@@ -265,20 +266,10 @@ struct tty_struct {
#define N_TTY_BUF_SIZE 4096
- /*
- * The following is data for the N_TTY line discipline. For
- * historical reasons, this is included in the tty structure.
- * Mostly locked by the BKL.
- */
unsigned char closing:1;
unsigned short minimum_to_wake;
- struct mutex atomic_read_lock;
- struct mutex atomic_write_lock;
- struct mutex output_lock;
- struct mutex echo_lock;
unsigned char *write_buf;
int write_cnt;
- spinlock_t read_lock;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 17/21] TTY: n_tty, propagate n_tty_data
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (15 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 16/21] TTY: move ldisc data from tty_struct: locks Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 18/21] TTY: move TTY_FLUSH* flags to tty_port Jiri Slaby
` (6 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
In some funtions we need only n_tty_data, so pass it down directly in
case tty is not needed there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 171 ++++++++++++++++++++++++----------------------------
1 file changed, 78 insertions(+), 93 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0a6fcda..531e539 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -153,10 +153,8 @@ static void n_tty_set_room(struct tty_struct *tty)
schedule_work(&tty->buf.work);
}
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
-
if (ldata->read_cnt < N_TTY_BUF_SIZE) {
ldata->read_buf[ldata->read_head] = c;
ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
@@ -167,23 +165,22 @@ static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
/**
* put_tty_queue - add character to tty
* @c: character
- * @tty: tty device
+ * @ldata: n_tty data
*
* Add a character to the tty read_buf queue. This is done under the
* read_lock to serialize character addition and also to protect us
* against parallel reads or flushes
*/
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
/*
* The problem of stomping on the buffers ends here.
* Why didn't anyone see this one coming? --AJK
*/
spin_lock_irqsave(&ldata->read_lock, flags);
- put_tty_queue_nolock(c, tty);
+ put_tty_queue_nolock(c, ldata);
spin_unlock_irqrestore(&ldata->read_lock, flags);
}
@@ -699,16 +696,15 @@ static void process_echoes(struct tty_struct *tty)
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
*
* Should be called under the echo lock to protect the echo buffer.
*/
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
int new_byte_pos;
if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
@@ -746,28 +742,24 @@ static void add_echo_byte(unsigned char c, struct tty_struct *tty)
/**
* echo_move_back_col - add operation to move back a column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
*
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
-
mutex_lock(&ldata->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
mutex_unlock(&ldata->echo_lock);
}
/**
* echo_set_canon_col - add operation to set the canon column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
@@ -775,15 +767,11 @@ static void echo_move_back_col(struct tty_struct *tty)
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
-
mutex_lock(&ldata->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
mutex_unlock(&ldata->echo_lock);
}
@@ -791,7 +779,7 @@ static void echo_set_canon_col(struct tty_struct *tty)
* echo_erase_tab - add operation to erase a tab
* @num_chars: number of character columns already used
* @after_tab: true if num_chars starts after a previous tab
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to erase a tab.
*
@@ -805,14 +793,12 @@ static void echo_set_canon_col(struct tty_struct *tty)
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
- struct tty_struct *tty)
+ struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
-
mutex_lock(&ldata->echo_lock);
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
/* We only need to know this modulo 8 (tab spacing) */
num_chars &= 7;
@@ -821,7 +807,7 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
if (after_tab)
num_chars |= 0x80;
- add_echo_byte(num_chars, tty);
+ add_echo_byte(num_chars, ldata);
mutex_unlock(&ldata->echo_lock);
}
@@ -839,19 +825,15 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
-
mutex_lock(&ldata->echo_lock);
-
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
- add_echo_byte(c, tty);
+ add_echo_byte(c, ldata);
}
-
mutex_unlock(&ldata->echo_lock);
}
@@ -876,12 +858,12 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(c, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(c, ldata);
}
mutex_unlock(&ldata->echo_lock);
@@ -889,14 +871,13 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
/**
* finish_erasing - complete erase
- * @tty: tty doing the erase
+ * @ldata: n_tty data
*/
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
if (ldata->erasing) {
- echo_char_raw('/', tty);
+ echo_char_raw('/', ldata);
ldata->erasing = 0;
}
}
@@ -944,11 +925,11 @@ static void eraser(unsigned char c, struct tty_struct *tty)
(N_TTY_BUF_SIZE - 1));
ldata->read_head = ldata->canon_head;
spin_unlock_irqrestore(&ldata->read_lock, flags);
- finish_erasing(tty);
+ finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
if (L_ECHOK(tty))
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
return;
}
kill_type = KILL;
@@ -984,15 +965,16 @@ static void eraser(unsigned char c, struct tty_struct *tty)
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!ldata->erasing) {
- echo_char_raw('\\', tty);
+ echo_char_raw('\\', ldata);
ldata->erasing = 1;
}
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(ldata->read_buf[head], tty);
- echo_move_back_col(tty);
+ echo_char_raw(ldata->read_buf[head],
+ ldata);
+ echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
@@ -1021,17 +1003,17 @@ static void eraser(unsigned char c, struct tty_struct *tty)
num_chars++;
}
}
- echo_erase_tab(num_chars, after_tab, tty);
+ echo_erase_tab(num_chars, after_tab, ldata);
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
}
}
@@ -1039,7 +1021,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
break;
}
if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
- finish_erasing(tty);
+ finish_erasing(ldata);
}
/**
@@ -1078,6 +1060,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush)
static inline void n_tty_receive_break(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNBRK(tty))
return;
if (I_BRKINT(tty)) {
@@ -1085,10 +1069,10 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
return;
}
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
}
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1132,16 +1116,18 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNPAR(tty))
return;
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
- put_tty_queue(c, tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
+ put_tty_queue(c, ldata);
} else if (I_INPCK(tty))
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
else
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1162,7 +1148,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
int parmrk;
if (ldata->raw) {
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
return;
}
@@ -1172,7 +1158,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
c = tolower(c);
if (L_EXTPROC(tty)) {
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
return;
}
@@ -1210,16 +1196,16 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
/* Record the column of first canon char. */
if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(tty);
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
return;
}
@@ -1285,10 +1271,10 @@ send_signal:
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
ldata->lnext = 1;
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (L_ECHOCTL(tty)) {
- echo_char_raw('^', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('^', ldata);
+ echo_char_raw('\b', ldata);
process_echoes(tty);
}
}
@@ -1298,9 +1284,9 @@ send_signal:
L_IEXTEN(tty)) {
unsigned long tail = ldata->canon_head;
- finish_erasing(tty);
+ finish_erasing(ldata);
echo_char(c, tty);
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
while (tail != ldata->read_head) {
echo_char(ldata->read_buf[tail], tty);
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
@@ -1315,7 +1301,7 @@ send_signal:
return;
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
process_echoes(tty);
}
goto handle_newline;
@@ -1343,7 +1329,7 @@ send_signal:
if (L_ECHO(tty)) {
/* Record the column of first canon char. */
if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(tty);
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
@@ -1352,12 +1338,12 @@ send_signal:
* EOL_CHAR and EOL2_CHAR?
*/
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
handle_newline:
spin_lock_irqsave(&ldata->read_lock, flags);
set_bit(ldata->read_head, ldata->read_flags);
- put_tty_queue_nolock(c, tty);
+ put_tty_queue_nolock(c, ldata);
ldata->canon_head = ldata->read_head;
ldata->canon_data++;
spin_unlock_irqrestore(&ldata->read_lock, flags);
@@ -1376,22 +1362,22 @@ handle_newline:
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (c == '\n')
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
else {
/* Record the column of first canon char. */
if (ldata->canon_head == ldata->read_head)
- echo_set_canon_col(tty);
+ echo_set_canon_col(ldata);
echo_char(c, tty);
}
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
}
@@ -2140,9 +2126,8 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
return mask;
}
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
{
- struct n_tty_data *ldata = tty->disc_data;
int nr, head, tail;
if (!ldata->canon_data)
@@ -2173,7 +2158,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
/* FIXME: Locking */
retval = ldata->read_cnt;
if (L_ICANON(tty))
- retval = inq_canon(tty);
+ retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 18/21] TTY: move TTY_FLUSH* flags to tty_port
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (16 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 17/21] TTY: n_tty, propagate n_tty_data Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 19/21] TTY: tty_buffer, cache pointer to tty->buf Jiri Slaby
` (5 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
They are only TTY buffers specific. And the buffers will go to
tty_port in the next patches. So to remove the need to have both
tty_port and tty_struct at some places, let us move the flags to
tty_port.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/tty_buffer.c | 18 ++++++++++--------
include/linux/tty.h | 5 +++--
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 91e326f..ab3d5c3 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -134,17 +134,18 @@ static void __tty_buffer_flush(struct tty_struct *tty)
void tty_buffer_flush(struct tty_struct *tty)
{
+ struct tty_port *port = tty->port;
unsigned long flags;
spin_lock_irqsave(&tty->buf.lock, flags);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
+ if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
spin_unlock_irqrestore(&tty->buf.lock, flags);
wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
__tty_buffer_flush(tty);
@@ -448,6 +449,7 @@ static void flush_to_ldisc(struct work_struct *work)
{
struct tty_struct *tty =
container_of(work, struct tty_struct, buf.work);
+ struct tty_port *port = tty->port;
unsigned long flags;
struct tty_ldisc *disc;
@@ -457,7 +459,7 @@ static void flush_to_ldisc(struct work_struct *work)
spin_lock_irqsave(&tty->buf.lock, flags);
- if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+ if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
struct tty_buffer *head;
while ((head = tty->buf.head) != NULL) {
int count;
@@ -475,7 +477,7 @@ static void flush_to_ldisc(struct work_struct *work)
/* Ldisc or user is trying to flush the buffers
we are feeding to the ldisc, stop feeding the
line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
break;
if (!tty->receive_room)
break;
@@ -489,14 +491,14 @@ static void flush_to_ldisc(struct work_struct *work)
flag_buf, count);
spin_lock_irqsave(&tty->buf.lock, flags);
}
- clear_bit(TTY_FLUSHING, &tty->flags);
+ clear_bit(TTYP_FLUSHING, &port->iflags);
}
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
__tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
spin_unlock_irqrestore(&tty->buf.lock, flags);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 08787ec..b4b3c56 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -197,6 +197,9 @@ struct tty_port {
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
+ unsigned long iflags; /* TTYP_ internal flags */
+#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
+#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1; /* port is a console */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
@@ -309,8 +312,6 @@ struct tty_file_private {
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
-#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
-#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 19/21] TTY: tty_buffer, cache pointer to tty->buf
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (17 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 18/21] TTY: move TTY_FLUSH* flags to tty_port Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 20/21] TTY: add port -> tty link Jiri Slaby
` (4 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
During the move of tty buffers from tty_struct to tty_port, we will
need to switch all users of buf to tty->port->buf. There are many
functions where this is accessed directly in their code many times.
Cache the tty->buf pointer in such functions now and change only
single lines in each function in the next patch.
Not that it is convenient for the next patch, but the code is now also
more readable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/tty_buffer.c | 132 +++++++++++++++++++++++++++--------------------
1 file changed, 76 insertions(+), 56 deletions(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ab3d5c3..ffaa441 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -29,17 +29,19 @@
void tty_buffer_free_all(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
+
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
kfree(thead);
}
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
+ while ((thead = buf->free) != NULL) {
+ buf->free = thead->next;
kfree(thead);
}
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
+ buf->tail = NULL;
+ buf->memory_used = 0;
}
/**
@@ -87,15 +89,17 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
{
+ struct tty_bufhead *buf = &tty->buf;
+
/* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
+ buf->memory_used -= b->size;
+ WARN_ON(buf->memory_used < 0);
if (b->size >= 512)
kfree(b);
else {
- b->next = tty->buf.free;
- tty->buf.free = b;
+ b->next = buf->free;
+ buf->free = b;
}
}
@@ -112,13 +116,14 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
static void __tty_buffer_flush(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
tty_buffer_free(tty, thead);
}
- tty->buf.tail = NULL;
+ buf->tail = NULL;
}
/**
@@ -135,21 +140,23 @@ static void __tty_buffer_flush(struct tty_struct *tty)
void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
+ struct tty_bufhead *buf = &tty->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
if (test_bit(TTYP_FLUSHING, &port->iflags)) {
set_bit(TTYP_FLUSHPENDING, &port->iflags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
wait_event(tty->read_wait,
test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
__tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
}
/**
@@ -197,12 +204,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
*/
static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
+ struct tty_bufhead *buf = &tty->buf;
struct tty_buffer *b, *n;
int left;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if ((b = tty->buf.tail) != NULL)
+ b = buf->tail;
+ if (b != NULL)
left = b->size - b->used;
else
left = 0;
@@ -214,8 +223,8 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
b->next = n;
b->commit = b->used;
} else
- tty->buf.head = n;
- tty->buf.tail = n;
+ buf->head = n;
+ buf->tail = n;
} else
size = left;
}
@@ -262,6 +271,7 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
const unsigned char *chars, char flag, size_t size)
{
+ struct tty_bufhead *buf = &tty->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -269,18 +279,18 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
copied += space;
chars += space;
/* There is a small chance that we need to split the data over
@@ -307,6 +317,7 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -314,18 +325,18 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
+ spin_lock_irqsave(&buf->lock, __flags);
space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
copied += space;
chars += space;
flags += space;
@@ -349,12 +360,14 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
void tty_schedule_flip(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_work(&tty->buf.work);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -376,20 +389,21 @@ EXPORT_SYMBOL(tty_schedule_flip);
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
size_t size)
{
+ struct tty_bufhead *buf = &tty->buf;
int space;
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
space = __tty_buffer_request_room(tty, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -413,20 +427,21 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->buf;
int space;
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
+ spin_lock_irqsave(&buf->lock, __flags);
space = __tty_buffer_request_room(tty, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
*flags = tb->flag_buf_ptr + tb->used;
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
@@ -450,6 +465,7 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_struct *tty =
container_of(work, struct tty_struct, buf.work);
struct tty_port *port = tty->port;
+ struct tty_bufhead *buf = &tty->buf;
unsigned long flags;
struct tty_ldisc *disc;
@@ -457,11 +473,11 @@ static void flush_to_ldisc(struct work_struct *work)
if (disc == NULL) /* !TTY_LDISC */
return;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
struct tty_buffer *head;
- while ((head = tty->buf.head) != NULL) {
+ while ((head = buf->head) != NULL) {
int count;
char *char_buf;
unsigned char *flag_buf;
@@ -470,7 +486,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count) {
if (head->next == NULL)
break;
- tty->buf.head = head->next;
+ buf->head = head->next;
tty_buffer_free(tty, head);
continue;
}
@@ -486,10 +502,10 @@ static void flush_to_ldisc(struct work_struct *work)
char_buf = head->char_buf_ptr + head->read;
flag_buf = head->flag_buf_ptr + head->read;
head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
disc->ops->receive_buf(tty, char_buf,
flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
}
clear_bit(TTYP_FLUSHING, &port->iflags);
}
@@ -501,7 +517,7 @@ static void flush_to_ldisc(struct work_struct *work)
clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
tty_ldisc_deref(disc);
}
@@ -534,16 +550,18 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
void tty_flip_buffer_push(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work);
+ flush_to_ldisc(&buf->work);
else
- schedule_work(&tty->buf.work);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
@@ -559,11 +577,13 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
void tty_buffer_init(struct tty_struct *tty)
{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
- INIT_WORK(&tty->buf.work, flush_to_ldisc);
+ struct tty_bufhead *buf = &tty->buf;
+
+ spin_lock_init(&buf->lock);
+ buf->head = NULL;
+ buf->tail = NULL;
+ buf->free = NULL;
+ buf->memory_used = 0;
+ INIT_WORK(&buf->work, flush_to_ldisc);
}
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 20/21] TTY: add port -> tty link
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (18 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 19/21] TTY: tty_buffer, cache pointer to tty->buf Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-18 20:26 ` [PATCH 21/21] TTY: move tty buffers to tty_port Jiri Slaby
` (3 subsequent siblings)
23 siblings, 0 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
For that purpose we have to temporarily introduce a second tty back
pointer into tty_port. It is because serial layer, and maybe others,
still do not use tty_port_tty_set/get. So that we cannot set the
tty_port->tty to NULL at will now.
Yes, the fix would be to convert whole serial layer and all its users
to tty_port_tty_set/get. However we are in the process of removing the
need of tty in most of the call sites, so this would lead to a
duplicated work.
Instead we have now tty_port->itty (internal tty) which will be used
only in flush_to_ldisc. For that one it is ensured that itty is valid
wherever the work is run. IOW, the work is synchronously cancelled
before we set itty to NULL and also before hangup is processed.
After we need only tty_port and not tty_struct in most code, this
shall be changed to tty_port_tty_set/get and itty removed completely.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 2 ++
drivers/tty/tty_io.c | 3 +++
include/linux/tty.h | 1 +
3 files changed, 6 insertions(+)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 2728afe..c326908 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -345,6 +345,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
tty_port_init(ports[1]);
o_tty->port = ports[0];
tty->port = ports[1];
+ o_tty->port->itty = o_tty;
tty_driver_kref_get(driver);
tty->count++;
@@ -371,6 +372,7 @@ static void pty_unix98_shutdown(struct tty_struct *tty)
static void pty_cleanup(struct tty_struct *tty)
{
+ tty->port->itty = NULL;
kfree(tty->port);
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index f90b621..202008f 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1417,6 +1417,8 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
__func__, tty->driver->name);
+ tty->port->itty = tty;
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
@@ -1552,6 +1554,7 @@ static void release_tty(struct tty_struct *tty, int idx)
tty->ops->shutdown(tty);
tty_free_termios(tty);
tty_driver_remove_tty(tty->driver, tty);
+ tty->port->itty = NULL;
if (tty->link)
tty_kref_put(tty->link);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index b4b3c56..9be74d6 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -189,6 +189,7 @@ struct tty_port_operations {
struct tty_port {
struct tty_struct *tty; /* Back pointer */
+ struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (19 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 20/21] TTY: add port -> tty link Jiri Slaby
@ 2012-10-18 20:26 ` Jiri Slaby
2012-10-25 18:02 ` Sasha Levin
2012-10-18 21:12 ` [PATCH 00/21] TTY buffer in tty_port and other stuff Greg KH
` (2 subsequent siblings)
23 siblings, 1 reply; 47+ messages in thread
From: Jiri Slaby @ 2012-10-18 20:26 UTC (permalink / raw)
To: gregkh; +Cc: alan, linux-kernel, jirislaby
So this is it. The big step why we did all the work over the past
kernel releases. Now everything is prepared, so nothing protects us
from doing that big step.
| | \ \ nnnn/^l | |
| | \ / / | |
| '-,.__ => \/ ,-` => | '-,.__
| O __.´´) ( .` | O __.´´)
~~~ ~~ `` ~~~ ~~
The buffers are now in the tty_port structure and we can start
teaching the buffer helpers (insert char/string, flip etc.) to use
tty_port instead of tty_struct all around.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 7 +++-
drivers/tty/pty.c | 2 +-
drivers/tty/tty_buffer.c | 102 ++++++++++++++++++++++++-----------------------
drivers/tty/tty_io.c | 2 -
drivers/tty/tty_ldisc.c | 10 ++---
drivers/tty/tty_port.c | 2 +
include/linux/tty.h | 6 +--
include/linux/tty_flip.h | 2 +-
8 files changed, 70 insertions(+), 63 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 531e539..60b076c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -149,8 +149,11 @@ static void n_tty_set_room(struct tty_struct *tty)
tty->receive_room = left;
/* Did this open up the receive buffer? We may need to flip */
- if (left && !old_left)
- schedule_work(&tty->buf.work);
+ if (left && !old_left) {
+ WARN_RATELIMIT(tty->port->itty == NULL,
+ "scheduling with invalid itty");
+ schedule_work(&tty->port->buf.work);
+ }
}
static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index c326908..4219f04 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -93,7 +93,7 @@ static void pty_unthrottle(struct tty_struct *tty)
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->buf.memory_used;
+ int n = 8192 - to->port->buf.memory_used;
if (n < 0)
return 0;
return n;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ffaa441..3876d3b 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -27,9 +27,9 @@
* Locking: none
*/
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
while ((thead = buf->head) != NULL) {
@@ -56,11 +56,11 @@ void tty_buffer_free_all(struct tty_struct *tty)
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
struct tty_buffer *p;
- if (tty->buf.memory_used + size > 65536)
+ if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -72,7 +72,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
+ port->buf.memory_used += size;
return p;
}
@@ -87,9 +87,9 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
* Locking: Caller must hold tty->buf.lock
*/
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
/* Dumb strategy for now - should keep some stats */
buf->memory_used -= b->size;
@@ -114,14 +114,14 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
* Locking: Caller must hold tty->buf.lock
*/
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
while ((thead = buf->head) != NULL) {
buf->head = thead->next;
- tty_buffer_free(tty, thead);
+ tty_buffer_free(port, thead);
}
buf->tail = NULL;
}
@@ -140,7 +140,7 @@ static void __tty_buffer_flush(struct tty_struct *tty)
void tty_buffer_flush(struct tty_struct *tty)
{
struct tty_port *port = tty->port;
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
@@ -155,7 +155,7 @@ void tty_buffer_flush(struct tty_struct *tty)
test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
- __tty_buffer_flush(tty);
+ __tty_buffer_flush(port);
spin_unlock_irqrestore(&buf->lock, flags);
}
@@ -171,9 +171,9 @@ void tty_buffer_flush(struct tty_struct *tty)
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &tty->buf.free;
+ struct tty_buffer **tbh = &port->buf.free;
while ((*tbh) != NULL) {
struct tty_buffer *t = *tbh;
if (t->size >= size) {
@@ -182,14 +182,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
t->used = 0;
t->commit = 0;
t->read = 0;
- tty->buf.memory_used += t->size;
+ port->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
+ return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
@@ -200,11 +200,11 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- * Locking: Caller must hold tty->buf.lock
+ * Locking: Caller must hold port->buf.lock
*/
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
@@ -218,7 +218,7 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if ((n = tty_buffer_find(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
@@ -241,16 +241,17 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
+ struct tty_port *port = tty->port;
unsigned long flags;
int length;
- spin_lock_irqsave(&tty->buf.lock, flags);
- length = __tty_buffer_request_room(tty, size);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_lock_irqsave(&port->buf.lock, flags);
+ length = __tty_buffer_request_room(port, size);
+ spin_unlock_irqrestore(&port->buf.lock, flags);
return length;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -265,13 +266,13 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
const unsigned char *chars, char flag, size_t size)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -280,7 +281,7 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
struct tty_buffer *tb;
spin_lock_irqsave(&buf->lock, flags);
- space = __tty_buffer_request_room(tty, goal);
+ space = __tty_buffer_request_room(tty->port, goal);
tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
@@ -311,13 +312,13 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
* the flags array indicates the status of the character. Returns the
* number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -326,7 +327,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
struct tty_buffer *tb;
spin_lock_irqsave(&buf->lock, __flags);
- space = __tty_buffer_request_room(tty, goal);
+ space = __tty_buffer_request_room(tty->port, goal);
tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
@@ -355,12 +356,12 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
* ldisc side of the queue. It then schedules those characters for
* processing by the line discipline.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_struct *tty)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
@@ -383,19 +384,19 @@ EXPORT_SYMBOL(tty_schedule_flip);
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
+ size_t size)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long flags;
struct tty_buffer *tb;
spin_lock_irqsave(&buf->lock, flags);
- space = __tty_buffer_request_room(tty, size);
+ space = __tty_buffer_request_room(tty->port, size);
tb = buf->tail;
if (likely(space)) {
@@ -421,19 +422,19 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long __flags;
struct tty_buffer *tb;
spin_lock_irqsave(&buf->lock, __flags);
- space = __tty_buffer_request_room(tty, size);
+ space = __tty_buffer_request_room(tty->port, size);
tb = buf->tail;
if (likely(space)) {
@@ -462,13 +463,16 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
static void flush_to_ldisc(struct work_struct *work)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work);
- struct tty_port *port = tty->port;
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_port *port = container_of(work, struct tty_port, buf.work);
+ struct tty_bufhead *buf = &port->buf;
+ struct tty_struct *tty;
unsigned long flags;
struct tty_ldisc *disc;
+ tty = port->itty;
+ if (WARN_RATELIMIT(tty == NULL, "tty is NULL"))
+ return;
+
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
@@ -487,7 +491,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (head->next == NULL)
break;
buf->head = head->next;
- tty_buffer_free(tty, head);
+ tty_buffer_free(port, head);
continue;
}
/* Ldisc or user is trying to flush the buffers
@@ -513,7 +517,7 @@ static void flush_to_ldisc(struct work_struct *work)
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
- __tty_buffer_flush(tty);
+ __tty_buffer_flush(port);
clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
@@ -532,7 +536,7 @@ static void flush_to_ldisc(struct work_struct *work)
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- flush_work(&tty->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
@@ -550,7 +554,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
void tty_flip_buffer_push(struct tty_struct *tty)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
@@ -575,9 +579,9 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
* Locking: none
*/
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
{
- struct tty_bufhead *buf = &tty->buf;
+ struct tty_bufhead *buf = &port->buf;
spin_lock_init(&buf->lock);
buf->head = NULL;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 202008f..a3eba7f 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -186,7 +186,6 @@ void free_tty_struct(struct tty_struct *tty)
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
- tty_buffer_free_all(tty);
tty->magic = 0xDEADDEAD;
kfree(tty);
}
@@ -2935,7 +2934,6 @@ void initialize_tty_struct(struct tty_struct *tty,
tty_ldisc_init(tty);
tty->session = NULL;
tty->pgrp = NULL;
- tty_buffer_init(tty);
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 47e3968..f4e6754 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -512,7 +512,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
- return cancel_work_sync(&tty->buf.work);
+ return cancel_work_sync(&tty->port->buf.work);
}
/**
@@ -525,7 +525,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
{
flush_work(&tty->hangup_work);
flush_work(&tty->SAK_work);
- flush_work(&tty->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
@@ -704,9 +704,9 @@ enable:
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
- schedule_work(&tty->buf.work);
+ schedule_work(&tty->port->buf.work);
if (o_work)
- schedule_work(&o_tty->buf.work);
+ schedule_work(&o_tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
@@ -817,7 +817,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
*/
clear_bit(TTY_LDISC, &tty->flags);
tty_unlock(tty);
- cancel_work_sync(&tty->buf.work);
+ cancel_work_sync(&tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
tty_lock(tty);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7bdd8d..416b42f 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -21,6 +21,7 @@
void tty_port_init(struct tty_port *port)
{
memset(port, 0, sizeof(*port));
+ tty_buffer_init(port);
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->delta_msr_wait);
@@ -126,6 +127,7 @@ static void tty_port_destructor(struct kref *kref)
struct tty_port *port = container_of(kref, struct tty_port, kref);
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
+ tty_buffer_free_all(port);
if (port->ops->destruct)
port->ops->destruct(port);
else
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9be74d6..d7ff88f 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -188,6 +188,7 @@ struct tty_port_operations {
};
struct tty_port {
+ struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
@@ -259,7 +260,6 @@ struct tty_struct {
struct tty_struct *link;
struct fasync_struct *fasync;
- struct tty_bufhead buf; /* Locked internally */
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
@@ -388,9 +388,9 @@ extern void disassociate_ctty(int priv);
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
extern void tty_flush_to_ldisc(struct tty_struct *tty);
-extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty);
-extern void tty_buffer_init(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_port *port);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 9239d03..2002344 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -11,7 +11,7 @@ void tty_schedule_flip(struct tty_struct *tty);
static inline int tty_insert_flip_char(struct tty_struct *tty,
unsigned char ch, char flag)
{
- struct tty_buffer *tb = tty->buf.tail;
+ struct tty_buffer *tb = tty->port->buf.tail;
if (tb && tb->used < tb->size) {
tb->flag_buf_ptr[tb->used] = flag;
tb->char_buf_ptr[tb->used++] = ch;
--
1.7.12.3
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open
2012-10-18 20:26 ` [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open Jiri Slaby
@ 2012-10-18 20:47 ` Marcel Holtmann
0 siblings, 0 replies; 47+ messages in thread
From: Marcel Holtmann @ 2012-10-18 20:47 UTC (permalink / raw)
To: Jiri Slaby
Cc: gregkh, alan, linux-kernel, jirislaby, Gustavo Padovan,
Johan Hedberg, linux-bluetooth
Hi Jiri,
> hci_ldisc's open checks if tty_struct->disc_data is set. And if so it
> returns with an error. But nothing ensures disc_data to be NULL. And
> since ld->ops->open shall be called only once, we do not need the
> check at all. So remove it.
>
> Note that this is not an issue now, but n_tty will start using the
> disc_data pointer and this invalid 'if' would trigger then rendering
> TTYs over BT unusable.
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Marcel Holtmann <marcel@holtmann.org>
> Cc: Gustavo Padovan <gustavo@padovan.org>
> Cc: Johan Hedberg <johan.hedberg@gmail.com>
> Cc: linux-bluetooth@vger.kernel.org
> ---
> drivers/bluetooth/hci_ldisc.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Regards
Marcel
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 00/21] TTY buffer in tty_port and other stuff
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (20 preceding siblings ...)
2012-10-18 20:26 ` [PATCH 21/21] TTY: move tty buffers to tty_port Jiri Slaby
@ 2012-10-18 21:12 ` Greg KH
2012-10-22 14:57 ` Alan Cox
2012-10-22 23:59 ` Greg KH
23 siblings, 0 replies; 47+ messages in thread
From: Greg KH @ 2012-10-18 21:12 UTC (permalink / raw)
To: Jiri Slaby; +Cc: alan, linux-kernel, jirislaby
On Thu, Oct 18, 2012 at 10:26:26PM +0200, Jiri Slaby wrote:
> Hi,
>
> this is the fifth series of patches which finally move tty buffers
> from tty_struct (present from open to close/hangup) to tty_port
> (present as long as the device). This allows us to get rid of the tty
> refcounting in the interrupt service routines and other hot paths
> after we are done. This is because we do not need to handle races
> among ISRs, timers, hangups and others, because tty_port lives as long
> as an interrupt/timer tick may occur. Unlike tty_struct.
>
> This set also cleans up devpts handling a bit. Devpts used to play
> with tty->driver_data which was a bit ugly. Now devpts returns a node
> which we store to driver_data and pass it back when we need devpts to
> kill that. As a result, we can do that in the pty code instead of an
> ugly hook in tty_release.
>
> Finally, the set moves all the n_tty private stuff from tty_struct to
> its own (internal) structure. This was an intention last time ago (at
> least here), but the races and undefined ldisc->open/close behavior
> did not allow us to do that. Now that we have ldisc kills and waits
> and bells and whistles we could finally go ahead.
>
> As usual, standard x86 stuff was runtime-tested. The rest is only
> checked to be compilation-errors free.
Nice work, I'll queue it up for 3.8 and let's see what breaks in
linux-next :)
greg k-h
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 00/21] TTY buffer in tty_port and other stuff
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (21 preceding siblings ...)
2012-10-18 21:12 ` [PATCH 00/21] TTY buffer in tty_port and other stuff Greg KH
@ 2012-10-22 14:57 ` Alan Cox
2012-10-22 23:59 ` Greg KH
23 siblings, 0 replies; 47+ messages in thread
From: Alan Cox @ 2012-10-22 14:57 UTC (permalink / raw)
To: Jiri Slaby; +Cc: gregkh, alan, linux-kernel, jirislaby
On Thu, 18 Oct 2012 22:26:26 +0200
Jiri Slaby <jslaby@suse.cz> wrote:
> Hi,
>
> this is the fifth series of patches which finally move tty buffers
> from tty_struct (present from open to close/hangup) to tty_port
> (present as long as the device). This allows us to get rid of the tty
> refcounting in the interrupt service routines and other hot paths
> after we are done. This is because we do not need to handle races
> among ISRs, timers, hangups and others, because tty_port lives as long
> as an interrupt/timer tick may occur. Unlike tty_struct.
Looks good to me working through them
Acked-by: Alan Cox <alan@linux.intel.com>
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 00/21] TTY buffer in tty_port and other stuff
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
` (22 preceding siblings ...)
2012-10-22 14:57 ` Alan Cox
@ 2012-10-22 23:59 ` Greg KH
23 siblings, 0 replies; 47+ messages in thread
From: Greg KH @ 2012-10-22 23:59 UTC (permalink / raw)
To: Jiri Slaby; +Cc: alan, linux-kernel, jirislaby
On Thu, Oct 18, 2012 at 10:26:26PM +0200, Jiri Slaby wrote:
> Hi,
>
> this is the fifth series of patches which finally move tty buffers
> from tty_struct (present from open to close/hangup) to tty_port
> (present as long as the device). This allows us to get rid of the tty
> refcounting in the interrupt service routines and other hot paths
> after we are done. This is because we do not need to handle races
> among ISRs, timers, hangups and others, because tty_port lives as long
> as an interrupt/timer tick may occur. Unlike tty_struct.
>
> This set also cleans up devpts handling a bit. Devpts used to play
> with tty->driver_data which was a bit ugly. Now devpts returns a node
> which we store to driver_data and pass it back when we need devpts to
> kill that. As a result, we can do that in the pty code instead of an
> ugly hook in tty_release.
>
> Finally, the set moves all the n_tty private stuff from tty_struct to
> its own (internal) structure. This was an intention last time ago (at
> least here), but the races and undefined ldisc->open/close behavior
> did not allow us to do that. Now that we have ldisc kills and waits
> and bells and whistles we could finally go ahead.
>
> As usual, standard x86 stuff was runtime-tested. The rest is only
> checked to be compilation-errors free.
I've applied all of these, very nice.
But you broke one of the staging drivers (drivers/staging/dgrp/) Care
to fix that up now?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-18 20:26 ` [PATCH 21/21] TTY: move tty buffers to tty_port Jiri Slaby
@ 2012-10-25 18:02 ` Sasha Levin
2012-10-25 18:08 ` Greg KH
2012-10-31 12:53 ` Jiri Slaby
0 siblings, 2 replies; 47+ messages in thread
From: Sasha Levin @ 2012-10-25 18:02 UTC (permalink / raw)
To: Jiri Slaby; +Cc: gregkh, alan, linux-kernel, jirislaby, Dave Jones
Hi guys,
On 10/18/2012 04:26 PM, Jiri Slaby wrote:
> So this is it. The big step why we did all the work over the past
> kernel releases. Now everything is prepared, so nothing protects us
> from doing that big step.
>
> | | \ \ nnnn/^l | |
> | | \ / / | |
> | '-,.__ => \/ ,-` => | '-,.__
> | O __.´´) ( .` | O __.´´)
> ~~~ ~~ `` ~~~ ~~
> The buffers are now in the tty_port structure and we can start
> teaching the buffer helpers (insert char/string, flip etc.) to use
> tty_port instead of tty_struct all around.
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
uncovered the following warning:
[ 1339.448706] ------------[ cut here ]------------
[ 1339.451224] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
[ 1339.454272] tty is NULLPid: 7147, comm: kworker/4:0 Tainted: G W 3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #75
[ 1339.458693] Call Trace:
[ 1339.459410] [<ffffffff81bb1ea0>] ? flush_to_ldisc+0x60/0x200
[ 1339.461289] [<ffffffff81109b86>] warn_slowpath_common+0x86/0xb0
[ 1339.462992] [<ffffffff81109c11>] warn_slowpath_fmt+0x41/0x50
[ 1339.464772] [<ffffffff81bb1ea0>] flush_to_ldisc+0x60/0x200
[ 1339.467076] [<ffffffff8112d5a9>] process_one_work+0x3b9/0x770
[ 1339.469501] [<ffffffff8112d458>] ? process_one_work+0x268/0x770
[ 1339.472053] [<ffffffff8112dcc1>] ? worker_thread+0x51/0x3f0
[ 1339.473831] [<ffffffff81bb1e40>] ? __tty_buffer_request_room+0x180/0x180
[ 1339.475834] [<ffffffff8112df2a>] worker_thread+0x2ba/0x3f0
[ 1339.478027] [<ffffffff8112dc70>] ? rescuer_thread+0x2d0/0x2d0
[ 1339.480431] [<ffffffff81138c33>] kthread+0xe3/0xf0
[ 1339.482383] [<ffffffff8117d7be>] ? put_lock_stats.isra.16+0xe/0x40
[ 1339.484171] [<ffffffff81138b50>] ? insert_kthread_work+0x90/0x90
[ 1339.485886] [<ffffffff83aedebc>] ret_from_fork+0x7c/0xb0
[ 1339.487943] [<ffffffff81138b50>] ? insert_kthread_work+0x90/0x90
[ 1339.490435] ---[ end trace e01a8b0af77894c4 ]---
I'm guessing it happens because we never cancel the scheduled work when we
free the buffer, so the scheduled work may run even after we freed the buffer.
Besides the warning itself, I think that 'tty is NULL' would need a newline
after it. Greg, should I send a patch for that?
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-25 18:02 ` Sasha Levin
@ 2012-10-25 18:08 ` Greg KH
2012-10-31 12:53 ` Jiri Slaby
1 sibling, 0 replies; 47+ messages in thread
From: Greg KH @ 2012-10-25 18:08 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, alan, linux-kernel, jirislaby, Dave Jones
On Thu, Oct 25, 2012 at 02:02:00PM -0400, Sasha Levin wrote:
> Hi guys,
>
> On 10/18/2012 04:26 PM, Jiri Slaby wrote:
> > So this is it. The big step why we did all the work over the past
> > kernel releases. Now everything is prepared, so nothing protects us
> > from doing that big step.
> >
> > | | \ \ nnnn/^l | |
> > | | \ / / | |
> > | '-,.__ => \/ ,-` => | '-,.__
> > | O __.´´) ( .` | O __.´´)
> > ~~~ ~~ `` ~~~ ~~
> > The buffers are now in the tty_port structure and we can start
> > teaching the buffer helpers (insert char/string, flip etc.) to use
> > tty_port instead of tty_struct all around.
> >
> > Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> > ---
>
> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
> uncovered the following warning:
>
> [ 1339.448706] ------------[ cut here ]------------
> [ 1339.451224] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
> [ 1339.454272] tty is NULLPid: 7147, comm: kworker/4:0 Tainted: G W 3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #75
> [ 1339.458693] Call Trace:
> [ 1339.459410] [<ffffffff81bb1ea0>] ? flush_to_ldisc+0x60/0x200
> [ 1339.461289] [<ffffffff81109b86>] warn_slowpath_common+0x86/0xb0
> [ 1339.462992] [<ffffffff81109c11>] warn_slowpath_fmt+0x41/0x50
> [ 1339.464772] [<ffffffff81bb1ea0>] flush_to_ldisc+0x60/0x200
> [ 1339.467076] [<ffffffff8112d5a9>] process_one_work+0x3b9/0x770
> [ 1339.469501] [<ffffffff8112d458>] ? process_one_work+0x268/0x770
> [ 1339.472053] [<ffffffff8112dcc1>] ? worker_thread+0x51/0x3f0
> [ 1339.473831] [<ffffffff81bb1e40>] ? __tty_buffer_request_room+0x180/0x180
> [ 1339.475834] [<ffffffff8112df2a>] worker_thread+0x2ba/0x3f0
> [ 1339.478027] [<ffffffff8112dc70>] ? rescuer_thread+0x2d0/0x2d0
> [ 1339.480431] [<ffffffff81138c33>] kthread+0xe3/0xf0
> [ 1339.482383] [<ffffffff8117d7be>] ? put_lock_stats.isra.16+0xe/0x40
> [ 1339.484171] [<ffffffff81138b50>] ? insert_kthread_work+0x90/0x90
> [ 1339.485886] [<ffffffff83aedebc>] ret_from_fork+0x7c/0xb0
> [ 1339.487943] [<ffffffff81138b50>] ? insert_kthread_work+0x90/0x90
> [ 1339.490435] ---[ end trace e01a8b0af77894c4 ]---
>
> I'm guessing it happens because we never cancel the scheduled work when we
> free the buffer, so the scheduled work may run even after we freed the buffer.
>
> Besides the warning itself, I think that 'tty is NULL' would need a newline
> after it. Greg, should I send a patch for that?
Yes, please do.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-25 18:02 ` Sasha Levin
2012-10-25 18:08 ` Greg KH
@ 2012-10-31 12:53 ` Jiri Slaby
2012-10-31 15:30 ` Sasha Levin
1 sibling, 1 reply; 47+ messages in thread
From: Jiri Slaby @ 2012-10-31 12:53 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 10/25/2012 08:02 PM, Sasha Levin wrote:
> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
> uncovered the following warning:
I cannot reproduce that :(. Do you still see it?
> [ 1339.448706] ------------[ cut here ]------------
> [ 1339.451224] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
> [ 1339.454272] tty is NULLPid: 7147, comm: kworker/4:0 Tainted: G W 3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #75
> [ 1339.458693] Call Trace:
> [ 1339.459410] [<ffffffff81bb1ea0>] ? flush_to_ldisc+0x60/0x200
> [ 1339.461289] [<ffffffff81109b86>] warn_slowpath_common+0x86/0xb0
> [ 1339.462992] [<ffffffff81109c11>] warn_slowpath_fmt+0x41/0x50
> [ 1339.464772] [<ffffffff81bb1ea0>] flush_to_ldisc+0x60/0x200
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-31 12:53 ` Jiri Slaby
@ 2012-10-31 15:30 ` Sasha Levin
2012-10-31 15:32 ` Jiri Slaby
0 siblings, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-10-31 15:30 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On Wed, Oct 31, 2012 at 8:53 AM, Jiri Slaby <jslaby@suse.cz> wrote:
> On 10/25/2012 08:02 PM, Sasha Levin wrote:
>> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
>> uncovered the following warning:
>
> I cannot reproduce that :(. Do you still see it?
Yes, it reproduces pretty easily while fuzzing.
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-31 15:30 ` Sasha Levin
@ 2012-10-31 15:32 ` Jiri Slaby
2012-10-31 15:59 ` Sasha Levin
2012-10-31 20:10 ` [PATCH 21/21] TTY: move tty buffers to tty_port Sasha Levin
0 siblings, 2 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-10-31 15:32 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 10/31/2012 04:30 PM, Sasha Levin wrote:
> On Wed, Oct 31, 2012 at 8:53 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>> On 10/25/2012 08:02 PM, Sasha Levin wrote:
>>> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
>>> uncovered the following warning:
>>
>> I cannot reproduce that :(. Do you still see it?
>
> Yes, it reproduces pretty easily while fuzzing.
What is your exact setup? I tried trinity with 100 000 syscalls inside
KVM with an LDEP-enabled kernel. How many serial ports do you have in
the guest? Any USB serials in there?
--
js
suse labs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-31 15:32 ` Jiri Slaby
@ 2012-10-31 15:59 ` Sasha Levin
2012-11-02 15:51 ` Jiri Slaby
2012-10-31 20:10 ` [PATCH 21/21] TTY: move tty buffers to tty_port Sasha Levin
1 sibling, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-10-31 15:59 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
[-- Attachment #1: Type: text/plain, Size: 852 bytes --]
On Wed, Oct 31, 2012 at 11:32 AM, Jiri Slaby <jslaby@suse.cz> wrote:
> On 10/31/2012 04:30 PM, Sasha Levin wrote:
>> On Wed, Oct 31, 2012 at 8:53 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>> On 10/25/2012 08:02 PM, Sasha Levin wrote:
>>>> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
>>>> uncovered the following warning:
>>>
>>> I cannot reproduce that :(. Do you still see it?
>>
>> Yes, it reproduces pretty easily while fuzzing.
>
> What is your exact setup? I tried trinity with 100 000 syscalls inside
> KVM with an LDEP-enabled kernel. How many serial ports do you have in
> the guest? Any USB serials in there?
So you probably want a lot more than 100k syscalls, why limit it at
all actually?
lkvm is emulating 4 serial ports, no USB ports.
I've attached my .config for the guest kernel as reference.
Thanks,
Sasha
[-- Attachment #2: config-sasha --]
[-- Type: application/octet-stream, Size: 135539 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-sasha"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_USER_QS=y
CONFIG_RCU_USER_QS_FORCE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=10
CONFIG_RCU_BOOST_DELAY=500
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_SCHED_NUMA=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
CONFIG_X86_VSMP=y
CONFIG_X86_UV=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_KVMTOOL_TEST_ENABLE=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=0
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT_IPV4=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_NF_NAT_IPV6=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_ULOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_PCH_CAN=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_PEAK_PCMCIA=y
CONFIG_CAN_PEAK_PCI=y
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB2=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y
CONFIG_TOIM3232_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
CONFIG_MCP2120_DONGLE=y
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y
#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_SIGMATEL_FIR=y
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_WILINK=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_NCI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
CONFIG_NFC_LLCP=y
#
# Near Field Communication (NFC) devices
#
CONFIG_PN544_HCI_NFC=y
CONFIG_NFC_PN533=y
CONFIG_NFC_WILINK=y
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_OMAP_OCP2SCP=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_DOCG4=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_ALAUDA=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=y
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=2
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_OSD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_SGI_XP=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
CONFIG_HP_ILO=y
CONFIG_SGI_GRU=y
CONFIG_SGI_GRU_DEBUG=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
CONFIG_BMP085_SPI=y
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_HYPERV_STORAGE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=y
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_MII=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_VXLAN=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=y
CONFIG_PCNET32=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_NET_CADENCE=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_BNX2X=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4VF=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=y
CONFIG_VXGE=y
CONFIG_VXGE_DEBUG_TRACE_ALL=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGB_PTP=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_PTP=y
CONFIG_IXGBEVF=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ZNET=y
CONFIG_IP1000=y
CONFIG_JME=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
CONFIG_NS83820=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_NE2K_PCI=y
CONFIG_PCMCIA_PCNET=y
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=y
# CONFIG_PCH_PTP is not set
CONFIG_ETHOC=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_NETXEN_NIC=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_PTP=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_STMMAC_PCI=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
# CONFIG_STMMAC_RING is not set
CONFIG_STMMAC_CHAINED=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_MICREL_KS8995MA=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=y
CONFIG_MAC80211_HWSIM=y
CONFIG_MWL8K=y
CONFIG_ATH_COMMON=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH5K_TEST_CHANNELS=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_MAC_DEBUG=y
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
# CONFIG_ATH6KL_SDIO is not set
# CONFIG_ATH6KL_USB is not set
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_AR5523=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_BCMA_EXTRA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
# CONFIG_BRCMSMAC is not set
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_SDIO_OOB=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMISCAN=y
CONFIG_BRCMDBG=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=y
CONFIG_IWLDVM=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWLWIFI_DEVICE_TESTMODE=y
CONFIG_IWLWIFI_P2P=y
CONFIG_IWLWIFI_EXPERIMENTAL_MFP=y
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
CONFIG_IWL3945=y
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
# CONFIG_RT2X00 is not set
CONFIG_RTL8192CE=y
CONFIG_RTL8192SE=y
CONFIG_RTL8192DE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_WL_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_PCIE=y
CONFIG_MWIFIEX_USB=y
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
CONFIG_WIMAX_I2400M_USB=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=y
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
CONFIG_SBNI=y
CONFIG_SBNI_MULTILINE=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKEHARD=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
# CONFIG_IEEE802154_MRF24J40 is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_VMXNET3=y
CONFIG_HYPERV_NET=y
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=y
CONFIG_HISAX_ELSA_CS=y
CONFIG_HISAX_AVM_A1_CS=y
CONFIG_HISAX_TELES_CS=y
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y
#
# Active cards
#
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIDRV=y
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_AVM_CS=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=y
CONFIG_ISDN_DRV_AVMB1_C4=y
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=y
CONFIG_ISDN_DIVAS_USERIDI=y
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_MISDN_HFCUSB=y
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
CONFIG_ISDN_HDLC=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_MRST_MAX3110=y
CONFIG_SERIAL_MFD_HSU=y
CONFIG_SERIAL_MFD_HSU_CONSOLE=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_IFX6X60=y
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_UV_MMTIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MID_DMA=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_VX855=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_PCH=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_74X164=y
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_HDQ_MASTER_OMAP=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_SMB347=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_MC13783_ADC=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_CPU_THERMAL=y
CONFIG_FAIR_SHARE=y
CONFIG_STEP_WISE=y
CONFIG_USER_SPACE=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_GEODE_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_LM3533=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_STMPE=y
#
# STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_SMSC=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_LPC_ICH=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_VX855=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_PALMAS=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_REGULATOR_ARIZONA=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS6524X=y
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_DVB_CORE=y
# CONFIG_DVB_NET is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_IR_ENE=y
CONFIG_IR_IMON=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_IR_IGUANA=y
CONFIG_IR_TTUSBIR=y
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
CONFIG_USB_GSPCA_JL2005BCD=y
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_USB_SN9C102 is not set
#
# Analog TV USB devices
#
CONFIG_VIDEO_AU0828=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_STK1160=y
#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_TM6000 is not set
#
# Digital TV USB devices
#
# CONFIG_DVB_USB is not set
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_CYPRESS_FIRMWARE=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_IT913X=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
CONFIG_SMS_USB_DRV=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
#
# Media capture/analog TV support
#
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
#
# Media digital TV PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_DM1105 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_MANTIS_CORE is not set
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_VIA_CAMERA is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVI=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
CONFIG_RADIO_SHARK2=y
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_TIMBERDALE is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=y
#
# Video and audio decoders
#
#
# MPEG video encoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_TUA9001=y
#
# Multistandard (satellite) frontends
#
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_CX24116=y
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10023=y
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_IT913X_FE=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_AF9033=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_USB=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=y
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_STUB_POULSBO=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_VIRTUAL=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
CONFIG_FB_AUO_K1901=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_OT200 is not set
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_TPS65217=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_PS3REMOTE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_TUSB6010=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_DEBUG=y
CONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=y
CONFIG_USB_SERIAL_ZIO=y
CONFIG_USB_SERIAL_ZTE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
#
# USB Physical Layer drivers
#
CONFIG_OMAP_USB2=y
CONFIG_USB_ISP1301=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_R8A66597=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_M66592=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
CONFIG_USB_DUMMY_HCD=y
CONFIG_USB_LIBCOMPOSITE=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TWL4030_USB=y
CONFIG_TWL6030_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA9633=y
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_DELL_NETBOOKS=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_QIB=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MCE_INJ=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I7CORE=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
CONFIG_EDAC_I7300=y
CONFIG_EDAC_SBRIDGE=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_RC5T583 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3029C2=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DA9052 is not set
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
# CONFIG_RTC_DRV_PCF50633 is not set
CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PCAP is not set
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_BIG_ENDIAN_IO=y
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_UTILS=y
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_STAGING=y
CONFIG_ET131X=y
CONFIG_SLICOSS=y
CONFIG_USBIP_CORE=y
# CONFIG_USBIP_VHCI_HCD is not set
CONFIG_USBIP_HOST=y
CONFIG_USBIP_DEBUG=y
CONFIG_W35UND=y
CONFIG_PRISM2_USB=y
CONFIG_ECHO=y
CONFIG_ASUS_OLED=y
CONFIG_R8712U=y
CONFIG_RTS5139=y
CONFIG_RTS5139_DEBUG=y
CONFIG_TRANZPORT=y
CONFIG_IDE_PHISON=y
CONFIG_USB_SERIAL_QUATECH2=y
CONFIG_DX_SEP=y
#
# IIO staging drivers
#
CONFIG_IIO_ST_HWMON=y
CONFIG_IIO_SW_RING=y
#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16203=y
CONFIG_ADIS16204=y
CONFIG_ADIS16209=y
CONFIG_ADIS16220=y
CONFIG_ADIS16240=y
CONFIG_KXSD9=y
CONFIG_LIS3L02DQ=y
CONFIG_LIS3L02DQ_BUF_KFIFO=y
# CONFIG_LIS3L02DQ_BUF_RING_SW is not set
CONFIG_SCA3000=y
#
# Analog to digital converters
#
CONFIG_AD7291=y
CONFIG_AD7298=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
CONFIG_AD7887=y
CONFIG_AD7780=y
CONFIG_AD7793=y
CONFIG_AD7816=y
CONFIG_AD7192=y
CONFIG_ADT7310=y
CONFIG_ADT7410=y
CONFIG_AD7280=y
CONFIG_MAX1363=y
CONFIG_MAX1363_RING_BUFFER=y
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7152=y
CONFIG_AD7746=y
#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
CONFIG_AD9832=y
CONFIG_AD9834=y
CONFIG_AD9850=y
CONFIG_AD9852=y
CONFIG_AD9910=y
CONFIG_AD9951=y
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16260=y
CONFIG_ADXRS450=y
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y
#
# Magnetometer sensors
#
CONFIG_SENSORS_AK8975=y
CONFIG_SENSORS_HMC5843=y
#
# Active energy metering IC
#
CONFIG_ADE7753=y
CONFIG_ADE7754=y
CONFIG_ADE7758=y
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y
#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
CONFIG_AD2S1210=y
#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=y
CONFIG_IIO_GPIO_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEBUG=y
CONFIG_ZCACHE=y
CONFIG_ZSMALLOC=y
CONFIG_WLAGS49_H2=y
CONFIG_WLAGS49_H25=y
CONFIG_FB_SM7XX=y
CONFIG_CRYSTALHD=y
CONFIG_CXT1E1=y
CONFIG_SBE_PMCC4_NCOMM=y
CONFIG_FB_XGI=y
CONFIG_ACPI_QUICKSTART=y
CONFIG_SBE_2T3E3=y
CONFIG_BCM_WIMAX=y
CONFIG_FT1000=y
CONFIG_FT1000_USB=y
CONFIG_FT1000_PCMCIA=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_ACNTPC=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_DTLK=y
CONFIG_SPEAKUP_SYNTH_KEYPC=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_AS102=y
CONFIG_DVB_CXD2099=y
CONFIG_VIDEO_DT3155=y
CONFIG_DT3155_CCIR=y
CONFIG_DT3155_STREAMING=y
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=y
CONFIG_LIRC_IGORPLUGUSB=y
CONFIG_LIRC_IMON=y
CONFIG_LIRC_SASEM=y
CONFIG_LIRC_SERIAL=y
# CONFIG_LIRC_SERIAL_TRANSMITTER is not set
CONFIG_LIRC_SIR=y
CONFIG_LIRC_ZILOG=y
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=y
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_ANDROID_INTF_ALARM_DEV=y
CONFIG_USB_WPAN_HCD=y
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_WIMAX_GDM72XX=y
CONFIG_WIMAX_GDM72XX_QOS=y
CONFIG_WIMAX_GDM72XX_K_MODE=y
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
CONFIG_WIMAX_GDM72XX_USB_PM=y
CONFIG_CSR_WIFI=y
CONFIG_NET_VENDOR_SILICOM=y
CONFIG_CED1401=y
CONFIG_DGRP=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
CONFIG_ACERHDF=y
CONFIG_ASUS_LAPTOP=y
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_AIO=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
CONFIG_FUJITSU_TABLET=y
CONFIG_AMILO_RFKILL=y
CONFIG_HP_ACCEL=y
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_EEEPC_LAPTOP=y
CONFIG_ASUS_WMI=y
CONFIG_ASUS_NB_WMI=y
CONFIG_EEEPC_WMI=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
CONFIG_IBM_RTL=y
CONFIG_XO15_EBOOK=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
CONFIG_VIRT_DRIVERS=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_ARIZONA=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7266=y
CONFIG_AD7791=y
CONFIG_AD7476=y
CONFIG_LP8788_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_SENSORS_LM3533=y
CONFIG_VCNL4000=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5624R_SPI=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5504=y
CONFIG_AD5755=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD5686=y
CONFIG_MAX517=y
CONFIG_MCP4725=y
#
# Hid Sensor IIO Common
#
#
# Digital gyroscope sensors
#
#
# Magnetometer sensors
#
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
CONFIG_VME_TSI148=y
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_VME_PIO2=y
CONFIG_PWM=y
CONFIG_PWM_TWL6030=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
CONFIG_GOOGLE_SMI=y
CONFIG_GOOGLE_MEMCONSOLE=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_RAM=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EXOFS_FS=y
CONFIG_EXOFS_DEBUG=y
CONFIG_ORE=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_OBJLAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="y"
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_FAULT_INJECTION=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_PROVE_RCU_DELAY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_TRACE=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_LKDTM=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_STRESS=y
CONFIG_IOMMU_LEAK=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_APPRAISE=y
CONFIG_EVM=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_YAMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_X86_64=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-31 15:32 ` Jiri Slaby
2012-10-31 15:59 ` Sasha Levin
@ 2012-10-31 20:10 ` Sasha Levin
1 sibling, 0 replies; 47+ messages in thread
From: Sasha Levin @ 2012-10-31 20:10 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 10/31/2012 11:32 AM, Jiri Slaby wrote:
> On 10/31/2012 04:30 PM, Sasha Levin wrote:
>> On Wed, Oct 31, 2012 at 8:53 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>> On 10/25/2012 08:02 PM, Sasha Levin wrote:
>>>> Fuzzing with trinity inside a KVM tools (lkvm) guest with -next kernel
>>>> uncovered the following warning:
>>>
>>> I cannot reproduce that :(. Do you still see it?
>>
>> Yes, it reproduces pretty easily while fuzzing.
>
> What is your exact setup? I tried trinity with 100 000 syscalls inside
> KVM with an LDEP-enabled kernel. How many serial ports do you have in
> the guest? Any USB serials in there?
btw, I'm also seeing the following lockups, don't know if it's related:
[ 2283.070569] INFO: task trinity-child20:9161 blocked for more than 120 seconds.
[ 2283.071775] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2283.074673] trinity-child20 D ffff8800276cb000 5424 9161 6364 0x00000000
[ 2283.076018] ffff880059d9da58 0000000000000002 0000000000000002 0000000000000000
[ 2283.077393] ffff880059d7b000 ffff880059d9dfd8 ffff880059d9dfd8 ffff880059d9dfd8
[ 2283.078763] ffff8800276cb000 ffff880059d7b000 ffff880059d9da78 ffff88001a095180
[ 2283.084144] Call Trace:
[ 2283.085039] [<ffffffff83a98bd5>] schedule+0x55/0x60
[ 2283.086748] [<ffffffff83a98bf3>] schedule_preempt_disabled+0x13/0x20
[ 2283.089000] [<ffffffff83a9735d>] __mutex_lock_common+0x36d/0x5a0
[ 2283.090658] [<ffffffff83a9afb3>] ? tty_lock_nested+0x73/0x80
[ 2283.091691] [<ffffffff83a9afb3>] ? tty_lock_nested+0x73/0x80
[ 2283.092779] [<ffffffff83a975cf>] mutex_lock_nested+0x3f/0x50
[ 2283.093875] [<ffffffff83a9afb3>] tty_lock_nested+0x73/0x80
[ 2283.094872] [<ffffffff83a9afcb>] tty_lock+0xb/0x10
[ 2283.095443] [<ffffffff81bae880>] tty_open+0x270/0x5f0
[ 2283.096181] [<ffffffff8127cda8>] chrdev_open+0xf8/0x1d0
[ 2283.097054] [<ffffffff8127693c>] do_dentry_open+0x1fc/0x310
[ 2283.098015] [<ffffffff8127ccb0>] ? cdev_put+0x20/0x20
[ 2283.098943] [<ffffffff8127777a>] finish_open+0x4a/0x60
[ 2283.099935] [<ffffffff81286947>] do_last+0xb87/0xe70
[ 2283.100910] [<ffffffff812844b0>] ? link_path_walk+0x70/0x900
[ 2283.101553] [<ffffffff81286cf2>] path_openat+0xc2/0x500
[ 2283.102282] [<ffffffff83a9a314>] ? _raw_spin_unlock_irqrestore+0x84/0xb0
[ 2283.103506] [<ffffffff8128716c>] do_filp_open+0x3c/0xa0
[ 2283.104282] [<ffffffff81296c11>] ? __alloc_fd+0x1e1/0x200
[ 2283.105278] [<ffffffff81277c0c>] do_sys_open+0x11c/0x1c0
[ 2283.106519] [<ffffffff81277ccc>] sys_open+0x1c/0x20
[ 2283.107241] [<ffffffff81277d01>] sys_creat+0x11/0x20
[ 2283.107975] [<ffffffff83a9be18>] tracesys+0xe1/0xe6
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-10-31 15:59 ` Sasha Levin
@ 2012-11-02 15:51 ` Jiri Slaby
2012-11-02 16:07 ` Sasha Levin
0 siblings, 1 reply; 47+ messages in thread
From: Jiri Slaby @ 2012-11-02 15:51 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 10/31/2012 04:59 PM, Sasha Levin wrote:
> So you probably want a lot more than 100k syscalls, why limit it at
> all actually?
I unset the limit but I still can't reproduce...
> I've attached my .config for the guest kernel as reference.
Even using this config does not help to reproduce that.
Do you use some special trinity params?
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-02 15:51 ` Jiri Slaby
@ 2012-11-02 16:07 ` Sasha Levin
2012-11-02 16:18 ` Jiri Slaby
0 siblings, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-11-02 16:07 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>> So you probably want a lot more than 100k syscalls, why limit it at
>> all actually?
>
> I unset the limit but I still can't reproduce...
>
>> I've attached my .config for the guest kernel as reference.
>
> Even using this config does not help to reproduce that.
>
> Do you use some special trinity params?
Not really:
./trinity -m --quiet --dangerous -l off
Can I add something to my kernel to provide more info when it happens?
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-02 16:07 ` Sasha Levin
@ 2012-11-02 16:18 ` Jiri Slaby
2012-11-02 16:23 ` Sasha Levin
2012-11-03 2:03 ` Sasha Levin
0 siblings, 2 replies; 47+ messages in thread
From: Jiri Slaby @ 2012-11-02 16:18 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
[-- Attachment #1: Type: text/plain, Size: 711 bytes --]
On 11/02/2012 05:07 PM, Sasha Levin wrote:
> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>> So you probably want a lot more than 100k syscalls, why limit it at
>>> all actually?
>>
>> I unset the limit but I still can't reproduce...
>>
>>> I've attached my .config for the guest kernel as reference.
>>
>> Even using this config does not help to reproduce that.
>>
>> Do you use some special trinity params?
>
> Not really:
>
> ./trinity -m --quiet --dangerous -l off
Oh, you run that as root??
> Can I add something to my kernel to provide more info when it happens?
Maybe the attached patch can tell us more...
--
js
suse labs
[-- Attachment #2: 0001-tty-BUF-DEBUG.patch --]
[-- Type: text/x-patch, Size: 1025 bytes --]
>From 36ad8f281846ef395e1969fc2af324c5edb13043 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sun, 28 Oct 2012 21:42:02 +0100
Subject: [PATCH] tty BUF DEBUG
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/tty_buffer.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 45d9161..c70274b 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -371,6 +371,7 @@ void tty_schedule_flip(struct tty_struct *tty)
if (buf->tail != NULL)
buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
+ WARN_RATELIMIT(tty->port->itty == NULL, "HUH\n");
schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -566,6 +567,7 @@ void tty_flip_buffer_push(struct tty_struct *tty)
buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
+ WARN_RATELIMIT(tty->port->itty == NULL, "HUH\n");
if (tty->low_latency)
flush_to_ldisc(&buf->work);
else
--
1.8.0
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-02 16:18 ` Jiri Slaby
@ 2012-11-02 16:23 ` Sasha Levin
2012-11-03 2:03 ` Sasha Levin
1 sibling, 0 replies; 47+ messages in thread
From: Sasha Levin @ 2012-11-02 16:23 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 11/02/2012 12:18 PM, Jiri Slaby wrote:
> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>> all actually?
>>>
>>> I unset the limit but I still can't reproduce...
>>>
>>>> I've attached my .config for the guest kernel as reference.
>>>
>>> Even using this config does not help to reproduce that.
>>>
>>> Do you use some special trinity params?
>>
>> Not really:
>>
>> ./trinity -m --quiet --dangerous -l off
>
> Oh, you run that as root??
Yup, it runs inside a disposable VM.
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-02 16:18 ` Jiri Slaby
2012-11-02 16:23 ` Sasha Levin
@ 2012-11-03 2:03 ` Sasha Levin
2012-11-03 15:55 ` Jiri Slaby
1 sibling, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-11-03 2:03 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 11/02/2012 12:18 PM, Jiri Slaby wrote:
> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>> all actually?
>>>
>>> I unset the limit but I still can't reproduce...
>>>
>>>> I've attached my .config for the guest kernel as reference.
>>>
>>> Even using this config does not help to reproduce that.
>>>
>>> Do you use some special trinity params?
>>
>> Not really:
>>
>> ./trinity -m --quiet --dangerous -l off
>
> Oh, you run that as root??
>
>> Can I add something to my kernel to provide more info when it happens?
>
> Maybe the attached patch can tell us more...
>
Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-03 2:03 ` Sasha Levin
@ 2012-11-03 15:55 ` Jiri Slaby
2012-11-03 23:06 ` Sasha Levin
0 siblings, 1 reply; 47+ messages in thread
From: Jiri Slaby @ 2012-11-03 15:55 UTC (permalink / raw)
To: Sasha Levin; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
[-- Attachment #1: Type: text/plain, Size: 1244 bytes --]
On 11/03/2012 03:03 AM, Sasha Levin wrote:
> On 11/02/2012 12:18 PM, Jiri Slaby wrote:
>> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>>> all actually?
>>>>
>>>> I unset the limit but I still can't reproduce...
>>>>
>>>>> I've attached my .config for the guest kernel as reference.
>>>>
>>>> Even using this config does not help to reproduce that.
>>>>
>>>> Do you use some special trinity params?
>>>
>>> Not really:
>>>
>>> ./trinity -m --quiet --dangerous -l off
>>
>> Oh, you run that as root??
>>
>>> Can I add something to my kernel to provide more info when it happens?
>>
>> Maybe the attached patch can tell us more...
>>
>
> Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
Actually it does. It is exactly as you wrote some time earlier. The work
is scheduled after is was cancelled and should not trigger anymore. Or,
it is scheduled before it is supposed to do. Could you try the attached
patch and report what happens with that patch?
PS I can't reproduce by whatever I tried.
thanks,
--
js
suse labs
[-- Attachment #2: 0001-tty-debug-part-2.patch --]
[-- Type: text/x-patch, Size: 1615 bytes --]
>From eeffa986dfd4ffcca1ed3332ffd3ff4645a4cf1d Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Sat, 3 Nov 2012 16:49:29 +0100
Subject: [PATCH] tty debug part 2
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/pty.c | 2 +-
drivers/tty/tty_buffer.c | 2 +-
drivers/tty/tty_io.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 4219f04..7438589 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -372,7 +372,7 @@ static void pty_unix98_shutdown(struct tty_struct *tty)
static void pty_cleanup(struct tty_struct *tty)
{
- tty->port->itty = NULL;
+ tty->port->itty = ERR_PTR(-2);
kfree(tty->port);
}
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ef020e2..a672f67 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -471,7 +471,7 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_ldisc *disc;
tty = port->itty;
- if (WARN_RATELIMIT(tty == NULL, "tty is NULL"))
+ if (WARN_RATELIMIT(IS_ERR_OR_NULL(tty), "tty is bad=%ld ops=%ps", PTR_ERR(tty), port->ops))
return;
disc = tty_ldisc_ref(tty);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index a3eba7f..d06b978 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1553,7 +1553,7 @@ static void release_tty(struct tty_struct *tty, int idx)
tty->ops->shutdown(tty);
tty_free_termios(tty);
tty_driver_remove_tty(tty->driver, tty);
- tty->port->itty = NULL;
+ tty->port->itty = ERR_PTR(-1);
if (tty->link)
tty_kref_put(tty->link);
--
1.8.0
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-03 15:55 ` Jiri Slaby
@ 2012-11-03 23:06 ` Sasha Levin
2012-11-04 0:53 ` Sasha Levin
0 siblings, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-11-03 23:06 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 11/03/2012 11:55 AM, Jiri Slaby wrote:
> On 11/03/2012 03:03 AM, Sasha Levin wrote:
>> On 11/02/2012 12:18 PM, Jiri Slaby wrote:
>>> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>>>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>>>> all actually?
>>>>>
>>>>> I unset the limit but I still can't reproduce...
>>>>>
>>>>>> I've attached my .config for the guest kernel as reference.
>>>>>
>>>>> Even using this config does not help to reproduce that.
>>>>>
>>>>> Do you use some special trinity params?
>>>>
>>>> Not really:
>>>>
>>>> ./trinity -m --quiet --dangerous -l off
>>>
>>> Oh, you run that as root??
>>>
>>>> Can I add something to my kernel to provide more info when it happens?
>>>
>>> Maybe the attached patch can tell us more...
>>>
>>
>> Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
>
> Actually it does. It is exactly as you wrote some time earlier. The work
> is scheduled after is was cancelled and should not trigger anymore. Or,
> it is scheduled before it is supposed to do. Could you try the attached
> patch and report what happens with that patch?
>
> PS I can't reproduce by whatever I tried.
>
> thanks,
>
Interesting...
[ 388.783955] tty is bad=0 ops= (null)Pid: 6480, comm: kworker/1:2 Tainted: G W
3.7.0-rc3-next-20121102-sasha-00002-gbb570e0-dirty #111
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-03 23:06 ` Sasha Levin
@ 2012-11-04 0:53 ` Sasha Levin
2012-11-27 19:57 ` Peter Hurley
0 siblings, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-11-04 0:53 UTC (permalink / raw)
To: Jiri Slaby; +Cc: Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 11/03/2012 07:06 PM, Sasha Levin wrote:
> On 11/03/2012 11:55 AM, Jiri Slaby wrote:
>> On 11/03/2012 03:03 AM, Sasha Levin wrote:
>>> On 11/02/2012 12:18 PM, Jiri Slaby wrote:
>>>> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>>>>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>>>>> all actually?
>>>>>>
>>>>>> I unset the limit but I still can't reproduce...
>>>>>>
>>>>>>> I've attached my .config for the guest kernel as reference.
>>>>>>
>>>>>> Even using this config does not help to reproduce that.
>>>>>>
>>>>>> Do you use some special trinity params?
>>>>>
>>>>> Not really:
>>>>>
>>>>> ./trinity -m --quiet --dangerous -l off
>>>>
>>>> Oh, you run that as root??
>>>>
>>>>> Can I add something to my kernel to provide more info when it happens?
>>>>
>>>> Maybe the attached patch can tell us more...
>>>>
>>>
>>> Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
>>
>> Actually it does. It is exactly as you wrote some time earlier. The work
>> is scheduled after is was cancelled and should not trigger anymore. Or,
>> it is scheduled before it is supposed to do. Could you try the attached
>> patch and report what happens with that patch?
>>
>> PS I can't reproduce by whatever I tried.
>>
>> thanks,
>>
>
> Interesting...
>
> [ 388.783955] tty is bad=0 ops= (null)Pid: 6480, comm: kworker/1:2 Tainted: G W
> 3.7.0-rc3-next-20121102-sasha-00002-gbb570e0-dirty #111
So after fuzzing for a while I'm also seeing these:
[ 603.533932] tty is bad=-2 ops= (null)Pid: 37, comm: kworker/4:0 Tainted: G W 3.7.0-rc3-next-20121102-sasha-000
02-gbb570e0-dirty #112
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-04 0:53 ` Sasha Levin
@ 2012-11-27 19:57 ` Peter Hurley
2012-11-30 23:52 ` Sasha Levin
0 siblings, 1 reply; 47+ messages in thread
From: Peter Hurley @ 2012-11-27 19:57 UTC (permalink / raw)
To: Sasha Levin
Cc: Jiri Slaby, Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On Sat, 2012-11-03 at 20:53 -0400, Sasha Levin wrote:
> On 11/03/2012 07:06 PM, Sasha Levin wrote:
> > On 11/03/2012 11:55 AM, Jiri Slaby wrote:
> >> On 11/03/2012 03:03 AM, Sasha Levin wrote:
> >>> On 11/02/2012 12:18 PM, Jiri Slaby wrote:
> >>>> On 11/02/2012 05:07 PM, Sasha Levin wrote:
> >>>>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
> >>>>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
> >>>>>>> So you probably want a lot more than 100k syscalls, why limit it at
> >>>>>>> all actually?
> >>>>>>
> >>>>>> I unset the limit but I still can't reproduce...
> >>>>>>
> >>>>>>> I've attached my .config for the guest kernel as reference.
> >>>>>>
> >>>>>> Even using this config does not help to reproduce that.
> >>>>>>
> >>>>>> Do you use some special trinity params?
> >>>>>
> >>>>> Not really:
> >>>>>
> >>>>> ./trinity -m --quiet --dangerous -l off
> >>>>
> >>>> Oh, you run that as root??
> >>>>
> >>>>> Can I add something to my kernel to provide more info when it happens?
> >>>>
> >>>> Maybe the attached patch can tell us more...
> >>>>
> >>>
> >>> Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
> >>
> >> Actually it does. It is exactly as you wrote some time earlier. The work
> >> is scheduled after is was cancelled and should not trigger anymore. Or,
> >> it is scheduled before it is supposed to do. Could you try the attached
> >> patch and report what happens with that patch?
> >>
> >> PS I can't reproduce by whatever I tried.
> >>
> >> thanks,
> >>
> >
> > Interesting...
> >
> > [ 388.783955] tty is bad=0 ops= (null)Pid: 6480, comm: kworker/1:2 Tainted: G W
> > 3.7.0-rc3-next-20121102-sasha-00002-gbb570e0-dirty #111
>
> So after fuzzing for a while I'm also seeing these:
>
> [ 603.533932] tty is bad=-2 ops= (null)Pid: 37, comm: kworker/4:0 Tainted: G W 3.7.0-rc3-next-20121102-sasha-000
> 02-gbb570e0-dirty #112
Hi Sasha,
Assuming this access-after-free is still reproducible for you, would you
be willing to try the patch below? I tried to reproduce this and
couldn't (with multiple cores and with just single core).
It would distinguish between case A (that the buf work is not being
cancelled) and case B (that the buf work is being scheduled after the
port has already been freed). It should BUG in case B, which would also
expose the call chain. It won't help at all in case A though :\
Regards,
Peter Hurley
-- >% --
Subject: [PATCH -next] tty: debug: Narrow possible causes of access-after-free
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/pty.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index be6a373..893fe69 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -409,6 +409,7 @@ static void pty_cleanup(struct tty_struct *tty)
{
tty->port->itty = NULL;
tty_port_put(tty->port);
+ tty->port = NULL;
}
/* Traditional BSD devices */
--
1.8.0
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH 21/21] TTY: move tty buffers to tty_port
2012-11-27 19:57 ` Peter Hurley
@ 2012-11-30 23:52 ` Sasha Levin
2012-12-01 14:59 ` flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port) Peter Hurley
0 siblings, 1 reply; 47+ messages in thread
From: Sasha Levin @ 2012-11-30 23:52 UTC (permalink / raw)
To: Peter Hurley
Cc: Jiri Slaby, Jiri Slaby, gregkh, alan, linux-kernel, Dave Jones
On 11/27/2012 02:57 PM, Peter Hurley wrote:
> On Sat, 2012-11-03 at 20:53 -0400, Sasha Levin wrote:
>> On 11/03/2012 07:06 PM, Sasha Levin wrote:
>>> On 11/03/2012 11:55 AM, Jiri Slaby wrote:
>>>> On 11/03/2012 03:03 AM, Sasha Levin wrote:
>>>>> On 11/02/2012 12:18 PM, Jiri Slaby wrote:
>>>>>> On 11/02/2012 05:07 PM, Sasha Levin wrote:
>>>>>>> On Fri, Nov 2, 2012 at 11:51 AM, Jiri Slaby <jslaby@suse.cz> wrote:
>>>>>>>> On 10/31/2012 04:59 PM, Sasha Levin wrote:
>>>>>>>>> So you probably want a lot more than 100k syscalls, why limit it at
>>>>>>>>> all actually?
>>>>>>>>
>>>>>>>> I unset the limit but I still can't reproduce...
>>>>>>>>
>>>>>>>>> I've attached my .config for the guest kernel as reference.
>>>>>>>>
>>>>>>>> Even using this config does not help to reproduce that.
>>>>>>>>
>>>>>>>> Do you use some special trinity params?
>>>>>>>
>>>>>>> Not really:
>>>>>>>
>>>>>>> ./trinity -m --quiet --dangerous -l off
>>>>>>
>>>>>> Oh, you run that as root??
>>>>>>
>>>>>>> Can I add something to my kernel to provide more info when it happens?
>>>>>>
>>>>>> Maybe the attached patch can tell us more...
>>>>>>
>>>>>
>>>>> Nope, I see the warnings mentioned before, without the new 'HUH' warnings.
>>>>
>>>> Actually it does. It is exactly as you wrote some time earlier. The work
>>>> is scheduled after is was cancelled and should not trigger anymore. Or,
>>>> it is scheduled before it is supposed to do. Could you try the attached
>>>> patch and report what happens with that patch?
>>>>
>>>> PS I can't reproduce by whatever I tried.
>>>>
>>>> thanks,
>>>>
>>>
>>> Interesting...
>>>
>>> [ 388.783955] tty is bad=0 ops= (null)Pid: 6480, comm: kworker/1:2 Tainted: G W
>>> 3.7.0-rc3-next-20121102-sasha-00002-gbb570e0-dirty #111
>>
>> So after fuzzing for a while I'm also seeing these:
>>
>> [ 603.533932] tty is bad=-2 ops= (null)Pid: 37, comm: kworker/4:0 Tainted: G W 3.7.0-rc3-next-20121102-sasha-000
>> 02-gbb570e0-dirty #112
>
> Hi Sasha,
>
> Assuming this access-after-free is still reproducible for you, would you
> be willing to try the patch below? I tried to reproduce this and
> couldn't (with multiple cores and with just single core).
>
> It would distinguish between case A (that the buf work is not being
> cancelled) and case B (that the buf work is being scheduled after the
> port has already been freed). It should BUG in case B, which would also
> expose the call chain. It won't help at all in case A though :\
>
> Regards,
> Peter Hurley
>
> -- >% --
> Subject: [PATCH -next] tty: debug: Narrow possible causes of access-after-free
>
>
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> ---
> drivers/tty/pty.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
> index be6a373..893fe69 100644
> --- a/drivers/tty/pty.c
> +++ b/drivers/tty/pty.c
> @@ -409,6 +409,7 @@ static void pty_cleanup(struct tty_struct *tty)
> {
> tty->port->itty = NULL;
> tty_port_put(tty->port);
> + tty->port = NULL;
> }
>
> /* Traditional BSD devices */
>
Still reproducible, I'm still seeing this with the patch above applied:
[ 1315.419759] ------------[ cut here ]------------
[ 1315.420611] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
[ 1315.423098] tty is NULL
[ 1315.423885] Pid: 727, comm: kworker/0:1 Tainted: G W 3.7.0-rc7-next-20121130-sasha-00015-g06fcc7a-dirty #2
[ 1315.427278] Call Trace:
[ 1315.428064] [<ffffffff81c32ae0>] ? flush_to_ldisc+0x60/0x200
[ 1315.429898] [<ffffffff8110dc56>] warn_slowpath_common+0x86/0xb0
[ 1315.431155] [<ffffffff8110dce1>] warn_slowpath_fmt+0x41/0x50
[ 1315.433087] [<ffffffff81c32ae0>] flush_to_ldisc+0x60/0x200
[ 1315.434972] [<ffffffff811319e9>] process_one_work+0x3b9/0x780
[ 1315.436797] [<ffffffff81131898>] ? process_one_work+0x268/0x780
[ 1315.438660] [<ffffffff81c32a80>] ? __tty_buffer_request_room+0x180/0x180
[ 1315.440772] [<ffffffff8113239a>] worker_thread+0x2ca/0x400
[ 1315.442012] [<ffffffff811320d0>] ? rescuer_thread+0x2e0/0x2e0
[ 1315.443821] [<ffffffff8113d0a3>] kthread+0xe3/0xf0
[ 1315.445362] [<ffffffff811824be>] ? put_lock_stats.isra.16+0xe/0x40
[ 1315.447331] [<ffffffff8113cfc0>] ? insert_kthread_work+0x90/0x90
[ 1315.449254] [<ffffffff83cb107c>] ret_from_fork+0x7c/0xb0
[ 1315.450246] [<ffffffff8113cfc0>] ? insert_kthread_work+0x90/0x90
[ 1315.455389] ---[ end trace 63e808312c27e968 ]---
Thanks,
Sasha
^ permalink raw reply [flat|nested] 47+ messages in thread
* flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port)
2012-11-30 23:52 ` Sasha Levin
@ 2012-12-01 14:59 ` Peter Hurley
2012-12-01 20:06 ` Peter Hurley
2012-12-04 19:21 ` Ilya Zykov
0 siblings, 2 replies; 47+ messages in thread
From: Peter Hurley @ 2012-12-01 14:59 UTC (permalink / raw)
To: Sasha Levin, Jiri Slaby, Jiri Slaby
Cc: gregkh, alan, linux-kernel, Dave Jones, Ilya Zykov
(cc'ing Ilya Zykov <ilya@ilyx.ru> because the test jig below is based on
his test program from https://lkml.org/lkml/2012/11/29/368 -- just want
to give credit where credit is due)
On Fri, 2012-11-30 at 18:52 -0500, Sasha Levin wrote:
>
> Still reproducible, I'm still seeing this with the patch above applied:
>
> [ 1315.419759] ------------[ cut here ]------------
> [ 1315.420611] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
> [ 1315.423098] tty is NULL
Thanks for sticking with this Sasha. Finally me too.
---
[ 88.331234] WARNING: at /home/peter/src/kernels/next/drivers/tty/tty_buffer.c:435 flush_to_ldisc+0x194/0x1d0()
[ 88.334505] Hardware name: Bochs
[ 88.335618] tty is bad=-1
[ 88.335703] Modules linked in: netconsole configfs bnep rfcomm bluetooth snd_hda_intel snd_hda_codec snd_hwdep
parport_pc ppdev snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device mac_hid
psmouse snd i2c_piix4 soundcore snd_page_alloc microcode serio_raw virtio_balloon lp parport floppy 8139too 8139cp
[ 88.345272] Pid: 39, comm: kworker/1:1 Tainted: G W 3.7.0-next-20121129+ttydebug-xeon #20121129+ttydebug
[ 88.347736] Call Trace:
[ 88.349024] [<ffffffff81058aff>] warn_slowpath_common+0x7f/0xc0
[ 88.350383] [<ffffffff81058bf6>] warn_slowpath_fmt+0x46/0x50
[ 88.351745] [<ffffffff81432bd4>] flush_to_ldisc+0x194/0x1d0
[ 88.353047] [<ffffffff816f7fe1>] ? _raw_spin_unlock_irq+0x21/0x50
[ 88.354190] [<ffffffff8108a809>] ? finish_task_switch+0x49/0xe0
[ 88.355436] [<ffffffff81077ad1>] process_one_work+0x121/0x490
[ 88.357674] [<ffffffff81432a40>] ? __tty_buffer_flush+0x90/0x90
[ 88.358954] [<ffffffff81078c84>] worker_thread+0x164/0x3e0
[ 88.360247] [<ffffffff81078b20>] ? manage_workers+0x120/0x120
[ 88.361282] [<ffffffff8107e230>] kthread+0xc0/0xd0
[ 88.362284] [<ffffffff816f0000>] ? cmos_do_probe+0x2eb/0x3bf
[ 88.363391] [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
[ 88.364797] [<ffffffff816fff6c>] ret_from_fork+0x7c/0xb0
[ 88.366087] [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
[ 88.367266] ---[ end trace 453a7c9f38fbfec0 ]---
I figured out how to make this reproduce easily. The test jig at the end
of this email will generate this multiple times a second.
The test creates a pty pair and spawns a child which writes to the slave
pts, while the parent waits for the first write and then abruptly closes
the master ptm and kills the child. (Just in case, I'd only run the jig
in a disposable vm. Obviously, the vm needs multiple cores and extra pty
serial devices ;)
>From instrumenting the tty_release() path, it's clear that tty_buffer
work is still scheduled even after tty_release_ldisc() has run. For
example, with this patch I get the warning below it.
[Further analysis to follow in subsequent mail...]
--- >% ---
[PATCH -next] tty: WARN if buffer work racing with tty free
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/tty_io.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 1ce50ec..9d53aec 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1511,6 +1511,8 @@ static void queue_release_one_tty(struct kref *kref)
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+ WARN_ON(work_pending(&tty->port->buf.work));
+
/* The hangup queue is now free so we can reuse it rather than
waste a chunk of memory for each port */
INIT_WORK(&tty->hangup_work, release_one_tty);
--
1.8.0
[ 88.376473] ------------[ cut here ]------------
[ 88.377513] WARNING: at /home/peter/src/kernels/next/drivers/tty/tty_io.c:1514 queue_release_one_tty+0x6e/0x70()
[ 88.379566] Hardware name: Bochs
[ 88.380665] Modules linked in: netconsole configfs bnep rfcomm bluetooth snd_hda_intel snd_hda_codec snd_hwdep
parport_pc ppdev snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device mac_hid
psmouse snd i2c_piix4 soundcore snd_page_alloc microcode serio_raw virtio_balloon lp parport floppy 8139too 8139cp
[ 88.387282] Pid: 1834, comm: pty_kill Tainted: G W 3.7.0-next-20121129+ttydebug-xeon #20121129+ttydebug
[ 88.389696] Call Trace:
[ 88.390883] [<ffffffff81058aff>] warn_slowpath_common+0x7f/0xc0
[ 88.392122] [<ffffffff81058b5a>] warn_slowpath_null+0x1a/0x20
[ 88.393294] [<ffffffff814283de>] queue_release_one_tty+0x6e/0x70
[ 88.394486] [<ffffffff81428408>] tty_kref_put+0x28/0x30
[ 88.395644] [<ffffffff8142848c>] release_tty+0x7c/0xe0
[ 88.396814] [<ffffffff8142b76b>] tty_release+0x46b/0x4d0
[ 88.397904] [<ffffffff81194f2e>] __fput+0xae/0x230
[ 88.398969] [<ffffffff811950be>] ____fput+0xe/0x10
[ 88.399994] [<ffffffff8107aa38>] task_work_run+0xc8/0xf0
[ 88.401060] [<ffffffff8105ea06>] do_exit+0x196/0x4b0
[ 88.402059] [<ffffffff8105eee4>] do_group_exit+0x44/0xa0
[ 88.403063] [<ffffffff8106f3ed>] get_signal_to_deliver+0x20d/0x4e0
[ 88.404120] [<ffffffff81016979>] do_signal+0x29/0x130
[ 88.405116] [<ffffffff81431a2e>] ? tty_ldisc_deref+0xe/0x10
[ 88.406116] [<ffffffff8142a2e7>] ? tty_write+0xb7/0xf0
[ 88.407116] [<ffffffff81193dc3>] ? vfs_write+0xb3/0x180
[ 88.408143] [<ffffffff81016b20>] do_notify_resume+0x80/0xc0
[ 88.409118] [<ffffffff816f863c>] retint_signal+0x48/0x8c
[ 88.410092] ---[ end trace 453a7c9f38fbfec1 ]---
--- >% ---
/*
* pty_thrash.c
*
* Based on original test jig by Ilya Zykov <ilya@ilyx.ru>
*/
#include <stdio.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <termios.h>
#include <stdlib.h>
#include <errno.h>
#include <string.h>
#include <stdarg.h>
#include <signal.h>
#define parent child_id
static int fd;
static void error_exit(char *f, ...)
{
va_list va;
va_start(va, f);
vprintf(f, va);
printf(": %s\n", strerror(errno));
va_end(va);
if (fd >= 0)
close(fd);
exit(EXIT_FAILURE);
}
int main(int argc, char *argv[]) {
int parent;
char pts_name[24];
int ptn, unlock;
while (1) {
fd = open("/dev/ptmx", O_RDWR);
if (fd < 0)
error_exit("opening pty master");
unlock = 0;
if (ioctl(fd, TIOCSPTLCK, &unlock) < 0)
error_exit("unlocking pty pair");
if (ioctl(fd, TIOCGPTN, &ptn) < 0)
error_exit("getting pty #");
snprintf(pts_name, sizeof(pts_name), "/dev/pts/%d", ptn);
child_id = fork();
if (child_id == -1)
error_exit("forking child");
if (parent) {
int err, id, status;
char buf[128];
int n;
n = read(fd, buf, sizeof(buf));
if (n < 0)
error_exit("master reading");
printf("%.*s\n", n-1, buf);
close(fd);
err = kill(child_id, SIGKILL);
if (err < 0)
error_exit("killing child");
id = waitpid(child_id, &status, 0);
if (id < 0 || id != child_id)
error_exit("waiting for child");
} else { /* Child */
close(fd);
printf("Test cycle on slave pty %s\n", pts_name);
fd = open(pts_name, O_RDWR);
if (fd < 0)
error_exit("opening pty slave");
while (1) {
char pattern[] = "test\n";
if (write(fd, pattern, strlen(pattern)) < 0)
error_exit("slave writing");
}
}
}
/* never gets here */
return 0;
}
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port)
2012-12-01 14:59 ` flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port) Peter Hurley
@ 2012-12-01 20:06 ` Peter Hurley
2012-12-02 19:57 ` Peter Hurley
2012-12-04 19:21 ` Ilya Zykov
1 sibling, 1 reply; 47+ messages in thread
From: Peter Hurley @ 2012-12-01 20:06 UTC (permalink / raw)
To: Jiri Slaby, Jiri Slaby, alan
Cc: gregkh, linux-kernel, Dave Jones, Sasha Levin
On Sat, 2012-12-01 at 09:59 -0500, Peter Hurley wrote:
....
> From instrumenting the tty_release() path, it's clear that tty_buffer
> work is still scheduled even after tty_release_ldisc() has run. For
> example, with this patch I get the warning below it.
>
> [Further analysis to follow in subsequent mail...]
[ Please note: this analysis only refers to the pty driver. The
situation with hardware drivers has further complications.]
Firstly, this problem predates Jiri's changes; only because he was
cautious by checking the lifetime of the itty in flush_to_ldisc(), did
he uncover this existing problem.
One example of how it is possible for buffer work to be scheduled even
after tty_release_ldisc() stems from how tty_ldisc_halt() works (or
rather doesn't). (I've snipped out the relevant code from tty_ldisc.c
for annotation below.)
tty_ldisc_halt() has only 2 callers; tty_release_ldisc() and
tty_set_ldisc(). A 3rd code site -- tty_ldisc_hangup() -- has similar
logic.
The idea behind tty_ldisc_halt() is to prevent __future__ use of this
ldisc (since users are required to acquire an ldisc reference via
tty_ldisc_try() -- also below). Annotations are mine.
----------------------------------
static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
/* this spin_lock is irrelevant to this discussion */
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = NULL;
/*
* Atomically test if __new__ ldisc references are
* allowed. Please note, there can be any number of
* existing users (ie., outstanding references).
*/
if (test_bit(TTY_LDISC, &tty->flags))
ld = get_ldisc(tty->ldisc);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ld;
}
static int tty_ldisc_halt(struct tty_struct *tty)
{
/* Prevent any __new__ ldisc references from being acquired. */
clear_bit(TTY_LDISC, &tty->flags);
/* Since __existing__ ldisc references can still schedule new
* buffer work (via tty_flip_buffer_push()), the cancellation
* below is pointless. The instant that cancellation completes
* an existing ldisc user can schedule new work.
*
* At a minimum, we must wait for all ldisc references **here**
* rather than **after** cancelling the work.
*/
return cancel_work_sync(&tty->buf.work);
}
**** A special note about locking *****
Locking around tty_ldisc_halt() ...
- does not prevent existing ldisc users from continuing to use the ldisc
- is unnecessary for the 3 'callers' because all 3 are trying to
accomplish the same goal by the same means
- can deadlock. Reference: https://lkml.org/lkml/2012/11/21/267
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port)
2012-12-01 20:06 ` Peter Hurley
@ 2012-12-02 19:57 ` Peter Hurley
0 siblings, 0 replies; 47+ messages in thread
From: Peter Hurley @ 2012-12-02 19:57 UTC (permalink / raw)
To: Jiri Slaby, Jiri Slaby, alan
Cc: gregkh, linux-kernel, Dave Jones, Sasha Levin, linux-serial
[whoops... cc: linux-serial]
On Sat, 2012-12-01 at 15:06 -0500, Peter Hurley wrote:
> On Sat, 2012-12-01 at 09:59 -0500, Peter Hurley wrote:
> ....
> > From instrumenting the tty_release() path, it's clear that tty_buffer
> > work is still scheduled even after tty_release_ldisc() has run. For
> > example, with this patch I get the warning below it.
> >
> > [Further analysis to follow in subsequent mail...]
>
> [ Please note: this analysis only refers to the pty driver. The
> situation with hardware drivers has further complications.]
>
> Firstly, this problem predates Jiri's changes; only because he was
> cautious by checking the lifetime of the itty in flush_to_ldisc(), did
> he uncover this existing problem.
>
> One example of how it is possible for buffer work to be scheduled even
> after tty_release_ldisc() stems from how tty_ldisc_halt() works (or
> rather doesn't). (I've snipped out the relevant code from tty_ldisc.c
> for annotation below.)
Naturally, I found the least obvious problem first.
The more obvious problem is that the pty driver doesn't have an ldisc
reference to the 'other' tty when pty_write() is called. So doing the
tty_flip_buffer_push() has scheduled buffer work for a potentially
halted ldisc.
static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link; <==== this is the 'other' tty
if (tty->stopped)
return 0;
if (c > 0) {
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to, buf, c);
/* And shovel */
if (c) {
tty_flip_buffer_push(to);
tty_wakeup(tty);
}
}
return c;
}
There are several possible ways to fix this:
1. Halt both ldiscs and ensure that both ldiscs have no outstanding
references before cancelling their work.
2. Claim an ldisc reference for the 'other' ldisc in things like
tty_write().
3. I'm sure there's other ways....
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port)
2012-12-01 14:59 ` flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port) Peter Hurley
2012-12-01 20:06 ` Peter Hurley
@ 2012-12-04 19:21 ` Ilya Zykov
1 sibling, 0 replies; 47+ messages in thread
From: Ilya Zykov @ 2012-12-04 19:21 UTC (permalink / raw)
To: Peter Hurley
Cc: Sasha Levin, Jiri Slaby, Jiri Slaby, gregkh, alan, linux-kernel,
Dave Jones, linux-serial
On 01.12.2012 18:59, Peter Hurley wrote:
> (cc'ing Ilya Zykov <ilya@ilyx.ru> because the test jig below is based on
> his test program from https://lkml.org/lkml/2012/11/29/368 -- just want
> to give credit where credit is due)
>
> On Fri, 2012-11-30 at 18:52 -0500, Sasha Levin wrote:
>>
>> Still reproducible, I'm still seeing this with the patch above applied:
>>
>> [ 1315.419759] ------------[ cut here ]------------
>> [ 1315.420611] WARNING: at drivers/tty/tty_buffer.c:476 flush_to_ldisc+0x60/0x200()
>> [ 1315.423098] tty is NULL
>
> Thanks for sticking with this Sasha. Finally me too.
>
> ---
> [ 88.331234] WARNING: at /home/peter/src/kernels/next/drivers/tty/tty_buffer.c:435 flush_to_ldisc+0x194/0x1d0()
> [ 88.334505] Hardware name: Bochs
> [ 88.335618] tty is bad=-1
> [ 88.335703] Modules linked in: netconsole configfs bnep rfcomm bluetooth snd_hda_intel snd_hda_codec snd_hwdep
> parport_pc ppdev snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device mac_hid
> psmouse snd i2c_piix4 soundcore snd_page_alloc microcode serio_raw virtio_balloon lp parport floppy 8139too 8139cp
> [ 88.345272] Pid: 39, comm: kworker/1:1 Tainted: G W 3.7.0-next-20121129+ttydebug-xeon #20121129+ttydebug
> [ 88.347736] Call Trace:
> [ 88.349024] [<ffffffff81058aff>] warn_slowpath_common+0x7f/0xc0
> [ 88.350383] [<ffffffff81058bf6>] warn_slowpath_fmt+0x46/0x50
> [ 88.351745] [<ffffffff81432bd4>] flush_to_ldisc+0x194/0x1d0
> [ 88.353047] [<ffffffff816f7fe1>] ? _raw_spin_unlock_irq+0x21/0x50
> [ 88.354190] [<ffffffff8108a809>] ? finish_task_switch+0x49/0xe0
> [ 88.355436] [<ffffffff81077ad1>] process_one_work+0x121/0x490
> [ 88.357674] [<ffffffff81432a40>] ? __tty_buffer_flush+0x90/0x90
> [ 88.358954] [<ffffffff81078c84>] worker_thread+0x164/0x3e0
> [ 88.360247] [<ffffffff81078b20>] ? manage_workers+0x120/0x120
> [ 88.361282] [<ffffffff8107e230>] kthread+0xc0/0xd0
> [ 88.362284] [<ffffffff816f0000>] ? cmos_do_probe+0x2eb/0x3bf
> [ 88.363391] [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
> [ 88.364797] [<ffffffff816fff6c>] ret_from_fork+0x7c/0xb0
> [ 88.366087] [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
> [ 88.367266] ---[ end trace 453a7c9f38fbfec0 ]---
>
>
> I figured out how to make this reproduce easily. The test jig at the end
> of this email will generate this multiple times a second.
>
> The test creates a pty pair and spawns a child which writes to the slave
> pts, while the parent waits for the first write and then abruptly closes
> the master ptm and kills the child. (Just in case, I'd only run the jig
> in a disposable vm. Obviously, the vm needs multiple cores and extra pty
> serial devices ;)
>
>>From instrumenting the tty_release() path, it's clear that tty_buffer
> work is still scheduled even after tty_release_ldisc() has run. For
> example, with this patch I get the warning below it.
>
> [Further analysis to follow in subsequent mail...]
>
> --- >% ---
> [PATCH -next] tty: WARN if buffer work racing with tty free
>
>
> Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
> ---
> drivers/tty/tty_io.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> index 1ce50ec..9d53aec 100644
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -1511,6 +1511,8 @@ static void queue_release_one_tty(struct kref *kref)
> {
> struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
>
> + WARN_ON(work_pending(&tty->port->buf.work));
> +
> /* The hangup queue is now free so we can reuse it rather than
> waste a chunk of memory for each port */
> INIT_WORK(&tty->hangup_work, release_one_tty);
>
> /*
> * pty_thrash.c
> *
> * Based on original test jig by Ilya Zykov <ilya@ilyx.ru>
> */
Yes, ok with me.
Signed-off-by: Ilya Zykov <ilya@ilyx.ru>
>
> #include <stdio.h>
> #include <fcntl.h>
> #include <sys/ioctl.h>
> #include <termios.h>
> #include <stdlib.h>
> #include <errno.h>
> #include <string.h>
> #include <stdarg.h>
> #include <signal.h>
>
> #define parent child_id
>
> static int fd;
>
> static void error_exit(char *f, ...)
> {
> va_list va;
>
> va_start(va, f);
> vprintf(f, va);
> printf(": %s\n", strerror(errno));
> va_end(va);
>
> if (fd >= 0)
> close(fd);
>
> exit(EXIT_FAILURE);
> }
>
> int main(int argc, char *argv[]) {
> int parent;
> char pts_name[24];
> int ptn, unlock;
>
> while (1) {
>
> fd = open("/dev/ptmx", O_RDWR);
> if (fd < 0)
> error_exit("opening pty master");
> unlock = 0;
> if (ioctl(fd, TIOCSPTLCK, &unlock) < 0)
> error_exit("unlocking pty pair");
> if (ioctl(fd, TIOCGPTN, &ptn) < 0)
> error_exit("getting pty #");
> snprintf(pts_name, sizeof(pts_name), "/dev/pts/%d", ptn);
>
> child_id = fork();
> if (child_id == -1)
> error_exit("forking child");
>
> if (parent) {
> int err, id, status;
> char buf[128];
> int n;
>
> n = read(fd, buf, sizeof(buf));
> if (n < 0)
> error_exit("master reading");
> printf("%.*s\n", n-1, buf);
>
> close(fd);
>
> err = kill(child_id, SIGKILL);
> if (err < 0)
> error_exit("killing child");
> id = waitpid(child_id, &status, 0);
> if (id < 0 || id != child_id)
> error_exit("waiting for child");
>
> } else { /* Child */
>
> close(fd);
> printf("Test cycle on slave pty %s\n", pts_name);
> fd = open(pts_name, O_RDWR);
> if (fd < 0)
> error_exit("opening pty slave");
>
> while (1) {
> char pattern[] = "test\n";
> if (write(fd, pattern, strlen(pattern)) < 0)
> error_exit("slave writing");
> }
>
> }
> }
>
> /* never gets here */
> return 0;
> }
>
Always Welcome.
Ilya.
^ permalink raw reply [flat|nested] 47+ messages in thread
end of thread, other threads:[~2012-12-04 19:21 UTC | newest]
Thread overview: 47+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-18 20:26 [PATCH 00/21] TTY buffer in tty_port and other stuff Jiri Slaby
2012-10-18 20:26 ` [PATCH 01/21] TTY: devpts, don't care about TTY in devpts_get_tty Jiri Slaby
2012-10-18 20:26 ` [PATCH 02/21] TTY: devpts, return created inode from devpts_pty_new Jiri Slaby
2012-10-18 20:26 ` [PATCH 03/21] TTY: devpts, do not set driver_data Jiri Slaby
2012-10-18 20:26 ` [PATCH 04/21] TTY: devpts, document devpts inode operations Jiri Slaby
2012-10-18 20:26 ` [PATCH 05/21] TTY: move devpts kill to pty Jiri Slaby
2012-10-18 20:26 ` [PATCH 06/21] TTY: vt, fix paste_selection ldisc handling Jiri Slaby
2012-10-18 20:26 ` [PATCH 07/21] TTY: ldisc, wait for idle ldisc in release Jiri Slaby
2012-10-18 20:26 ` [PATCH 08/21] TTY: hci_ldisc, remove invalid check in open Jiri Slaby
2012-10-18 20:47 ` Marcel Holtmann
2012-10-18 20:26 ` [PATCH 09/21] TTY: n_tty, simplify read_buf+echo_buf allocation Jiri Slaby
2012-10-18 20:26 ` [PATCH 10/21] TTY: n_tty, remove bogus checks Jiri Slaby
2012-10-18 20:26 ` [PATCH 11/21] TTY: audit, stop accessing tty->icount Jiri Slaby
2012-10-18 20:26 ` [PATCH 12/21] TTY: n_tty, add ldisc data to n_tty Jiri Slaby
2012-10-18 20:26 ` [PATCH 13/21] TTY: move ldisc data from tty_struct: simple members Jiri Slaby
2012-10-18 20:26 ` [PATCH 14/21] TTY: move ldisc data from tty_struct: bitmaps Jiri Slaby
2012-10-18 20:26 ` [PATCH 15/21] TTY: move ldisc data from tty_struct: read_* and echo_* and canon_* stuff Jiri Slaby
2012-10-18 20:26 ` [PATCH 16/21] TTY: move ldisc data from tty_struct: locks Jiri Slaby
2012-10-18 20:26 ` [PATCH 17/21] TTY: n_tty, propagate n_tty_data Jiri Slaby
2012-10-18 20:26 ` [PATCH 18/21] TTY: move TTY_FLUSH* flags to tty_port Jiri Slaby
2012-10-18 20:26 ` [PATCH 19/21] TTY: tty_buffer, cache pointer to tty->buf Jiri Slaby
2012-10-18 20:26 ` [PATCH 20/21] TTY: add port -> tty link Jiri Slaby
2012-10-18 20:26 ` [PATCH 21/21] TTY: move tty buffers to tty_port Jiri Slaby
2012-10-25 18:02 ` Sasha Levin
2012-10-25 18:08 ` Greg KH
2012-10-31 12:53 ` Jiri Slaby
2012-10-31 15:30 ` Sasha Levin
2012-10-31 15:32 ` Jiri Slaby
2012-10-31 15:59 ` Sasha Levin
2012-11-02 15:51 ` Jiri Slaby
2012-11-02 16:07 ` Sasha Levin
2012-11-02 16:18 ` Jiri Slaby
2012-11-02 16:23 ` Sasha Levin
2012-11-03 2:03 ` Sasha Levin
2012-11-03 15:55 ` Jiri Slaby
2012-11-03 23:06 ` Sasha Levin
2012-11-04 0:53 ` Sasha Levin
2012-11-27 19:57 ` Peter Hurley
2012-11-30 23:52 ` Sasha Levin
2012-12-01 14:59 ` flush_to_ldisc accesses tty after free (was: [PATCH 21/21] TTY: move tty buffers to tty_port) Peter Hurley
2012-12-01 20:06 ` Peter Hurley
2012-12-02 19:57 ` Peter Hurley
2012-12-04 19:21 ` Ilya Zykov
2012-10-31 20:10 ` [PATCH 21/21] TTY: move tty buffers to tty_port Sasha Levin
2012-10-18 21:12 ` [PATCH 00/21] TTY buffer in tty_port and other stuff Greg KH
2012-10-22 14:57 ` Alan Cox
2012-10-22 23:59 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).